Horizontal Deflection Output For High Resolution Display, Color TV High Speed Switching Applications

Download as pdf or txt
Download as pdf or txt
You are on page 1of 5

2SD2498

TOSHIBA TRANSISTOR SILICON NPN TRIPLE DIFFUSED MESA TYPE

2SD2498
HORIZONTAL DEFLECTION OUTPUT FOR HIGH
RESOLUTION DISPLAY, COLOR TV Unit: mm

HIGH SPEED SWITCHING APPLICATIONS

High Voltage : VCBO = 1500 V


Low Saturation Voltage : VCE (sat) = 5 V (Max.)
High Speed : tf = 0.4 µs (Typ.)
Collector Metal (Fin) is Fully Covered with Mold Resin.

MAXIMUM RATINGS (Tc = 25°C)

CHARACTERISTIC SYMBOL RATING UNIT

Collector−Base Voltage VCBO 1500 V


Collector−Emitter Voltage VCEO 600 V
Emitter−Base Voltage VEBO 5 V
DC IC 6
Collector Current A
Pulse ICP 12
Base Current IB 3 A JEDEC ―
Collector Power Dissipation PC 50 W JEITA ―
Junction Temperature Tj 150 °C TOSHIBA 2-16E3A
Storage Temperature Range Tstg −55~150 °C
Weight: 5.5 g (typ.)

ELECTRICAL CHARACTERISTICS (Tc = 25°C)

CHARACTERISTIC SYMBOL TEST CONDITION MIN TYP. MAX UNIT

Collector Cut−off Current ICBO VCB = 1500 V, IE = 0 ― ― 1 mA


Emitter Cut−off Current IEBO VEB = 5 V, IC = 0 ― ― 10 µA
Collector−Emitter Breakdown
V (BR) CEO IC = 10 mA, IB = 0 600 ― ― V
Voltage
hFE (1) VCE = 5 V, IC = 1 A 10 ― 30
DC Current Gain ―
hFE (2) VCE = 5 V, IC = 4A 5 ― 9
Collector−Emitter Saturation
VCE (sat) IC = 4A, IB = 0.8 A ― ― 5 V
Voltage
Base−Emitter Saturation
VBE (sat) IC = 4 A, IB = 0.8 A ― 0.9 1.2 V
Voltage
Transition Frequency fT VCE = 10 V, IC = 0.1 A ― 2 ― MHz
Collector Output Capacitance Cob VCB = 10 V, IE = 0, f = 1 MHz ― 95 ― pF

Switching Storage Time tstg ICP = 4 A, IB1 (end) = 0.8 A ― 7 10


µs
Time (Fig.1) Fall Time tf fH = 15.75 kHz ― 0.4 0.7

1 2001-08-20
2SD2498
Fig.1 SWITCHING TIME TEST CIRCUIT

2 2001-08-20
2SD2498

3 2001-08-20
2SD2498

4 2001-08-20
2SD2498

RESTRICTIONS ON PRODUCT USE 000707EAA

• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc..

• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this
document shall be made at the customer’s own risk.

• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other
rights of the third parties which may result from its use. No license is granted by implication or otherwise under
any intellectual property or other rights of TOSHIBA CORPORATION or others.

• The information contained herein is subject to change without notice.

5 2001-08-20

You might also like