Scribd Logo
Upload

Welcome to Scribd!

  • 12 views

    P-3370 Rotor Cpi Tir

    Uploaded by

    Agung
    This document is a total indicated runout inspection report for a generator rotor from General Electric. It summarizes the radial and axial runout measurements in millimeters at various angular positions around the rotor. The total indicated runout was found to be 0.155 mm radially and 0.035 mm axially, within specification for the rotor to be accepted. The inspection was performed by Kamidi and Agus P of PT. Sulzer Indonesia on an incoming rotor supported by V-blocks.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd

    P-3370 Rotor Cpi Tir

    Uploaded by

    Agung
    12 views2 pages
    This document is a total indicated runout inspection report for a generator rotor from General Electric. It summarizes the radial and axial runout measurements in millimeters at various angular positions around the rotor. The total indicated runout was found to be 0.155 mm radially and 0.035 mm axially, within specification for the rotor to be accepted. The inspection was performed by Kamidi and Agus P of PT. Sulzer Indonesia on an incoming rotor supported by V-blocks.

    Original Title

    P-3370 ROTOR CPI TIR.doc

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document is a total indicated runout inspection report for a generator rotor from General Electric. It summarizes the radial and axial runout measurements in millimeters at various angular positions around the rotor. The total indicated runout was found to be 0.155 mm radially and 0.035 mm axially, within specification for the rotor to be accepted. The inspection was performed by Kamidi and Agus P of PT. Sulzer Indonesia on an incoming rotor supported by V-blocks.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    12 views2 pages

    P-3370 Rotor Cpi Tir

    Uploaded by

    Agung
    This document is a total indicated runout inspection report for a generator rotor from General Electric. It summarizes the radial and axial runout measurements in millimeters at various angular positions around the rotor. The total indicated runout was found to be 0.155 mm radially and 0.035 mm axially, within specification for the rotor to be accepted. The inspection was performed by Kamidi and Agus P of PT. Sulzer Indonesia on an incoming rotor supported by V-blocks.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 2

    PT.

    Sulzer Indonesia
    PROJECT NO. : P-03370
    CUSTOMER : PT. CPI
    TOTAL INDICATED RUNOUT INSPECTION REPORT MFR : GENERAL ELECTRIC
    SERIAL NO. : TBA
    REPORT NO. : Rev.00

    INSPECTED BY: KAMIDI & AGUS P DATE: 2020


    STATUS: INCOMING OTHERS/…………. FINAL SURFACES: RADIAL AXIAL UNITS: MILLIMETERS INCHES

    Position 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
    0° 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    45° 0.005 0.060 0.050 0 0.010 0.040 -0.070 0.030 -0.010 -0.010 0.020 -0.005 -0.010 0.005 0
    90° 0.010 0.090 0.010 0 0.010 0.015 -0.060 0.030 -0.010 -0.050 0.010 -0.015 0 0.010 0
    135° 0.005 0.100 0.005 0 -0.040 0.005 -0.040 -0.050 -0.010 0.045 0.010 0.015 -0.010 -0.005 -0.005
    180° 0.005 -0.020 -0.020 0 -0.010 -0.010 0.130 0.050 0.060 -0.010 -0.015 -0.015 -0.010 -0.010 -0.005
    225° 0.010 0.005 0.005 0 -0.015 -0.025 -0.050 -0.010 0.010 -0.020 -0.020 -0.035 0.005 0.010 0
    270° 0.005 -0.020 0.010 0 -0.020 0.005 -0.090 0.030 0.145 -0.055 0.005 -0.025 0.010 0 -0.005
    315° 0.010 0.025 0.010 0 0.010 0.035 0.020 0.020 0.090 0.080 0.250 0.005 0.010 0 0.005
    TIR 0.005 0.110 0.045 0 0.050 0.065 0.130 0.050 0.155 0.035 0.240 0.040 0.020 0.010 0.010

    This material is the exclusive property of PT. Sulzer Indonesia SULZER CONFIDENTIAL
    PRO-01FR-56 Rev.04 Page 1 of 2
    PT. Sulzer Indonesia

    Position 16 17 18 19
    1. 0° 0 0 0 0
    2. 45° 0.010 0 0.025 0.015
    3. 90° 0 0 0 0.010
    4. 135° 0 0.005 0 -0.020
    1. 180° 0.005 0 0.020 0.025
    2. 225° 0 -0.005 -0.010 0.020
    3. 270° 0 0.010 0.010 0
    4. 315° 0.005 0 0 0
    TIR 0.010 0.010 0.035 0.025

    NOTE:
    1. ALL PHASE RECORDED : CW VIEWED FROM DRIVE END
    2. ZERO DEGREE POINT IS : CENTER POLE
    3. ROTOR SUPPORTED BY : V-BLOCK
    4.

    PREPARED BY: Wira Agung

    APPROVED BY:

    This material is the exclusive property of PT. Sulzer Indonesia SULZER CONFIDENTIAL
    PRO-01FR-56 Rev.04 Page 2 of 2

    You might also like