Petroleum Refining Processes Are The

Petroleum refining processes
From Wikipedia, the free encyclopedia
Petroleum refinery in Anacortes, Washington, United States
Petroleum refining processes are the chemical engineering processes and other facilities used in
petroleum refineries (also referred to as oil refineries) to transform crude oil into useful products
such as liquefied petroleum gas (LPG), gasoline or petrol, kerosene, jet fuel, diesel oil and fuel
oils.[1][2][3]
Petroleum refineries are very large industrial complexes that involve many different processing
units and auxiliary facilities such as utility units and storage tanks. Each refinery has its own
unique arrangement and combination of refining processes largely determined by the refinery
location, desired products and economic considerations. There are most probably no two
refineries that are identical in every respect.
Some modern petroleum refineries process as much as 800,000 to 900,000 barrels (127,000 to
143,000 cubic meters) per day of crude oil.
Contents
 1 History
 2 Processing units used in refineries
 3 Auxiliary facilities required in refineries
 4 The crude oil distillation unit
 5 Flow diagram of a typical petroleum refinery
 6 Refining end-products
o 6.1 Light distillates
o 6.2 Middle distillates
o 6.3 Heavy distillates
 7 References
History
Prior to the nineteenth century, petroleum was known and utilized in various fashions in
Babylon, Egypt, China, Persia, Rome and Azerbaijan. However, the modern history of the
petroleum industry is said to have begun in 1846 when Abraham Gessner of Nova Scotia,
Canada devised a process to produce kerosene from coal. Shortly thereafter, in 1854, Ignacy
Lukasiewicz began producing kerosene from hand-dug oil wells near the town of Krosno, now in
Poland. The first large petroleum refinery was built in Ploesti, Romania in 1856 using the
abundant oil available in Romania.[4][5]
In North America, the first oil well was drilled in 1858 by James Miller Williams in Ontario,
Canada. In the United States, the petroleum industry began in 1859 when Edwin Drake found oil
near Titusville, Pennsylvania.[6] The industry grew slowly in the 1800s, primarily producing
kerosene for oil lamps. In the early twentieth century, the introduction of the internal combustion
engine and its use in automobiles created a market for gasoline that was the impetus for fairly
rapid growth of the petroleum industry. The early finds of petroleum like those in Ontario and
Pennsylvania were soon outstripped by large oil "booms" in Oklahoma, Texas and California.[7]
Prior to World War II in the early 1940s, most petroleum refineries in the United States consisted
simply of crude oil distillation units (often referred to as atmospheric crude oil distillation units).
Some refineries also had vacuum distillation units as well as thermal cracking units such as
visbreakers (viscosity breakers, units to lower the viscosity of the oil). All of the many other
refining processes discussed below were developed during the war or within a few years after the
war. They became commercially available within 5 to 10 years after the war ended and the
worldwide petroleum industry experienced very rapid growth. The driving force for that growth
in technology and in the number and size of refineries worldwide was the growing demand for
automotive gasoline and aircraft fuel.
In the United States, for various complex economic and political reasons, the construction of new
refineries came to a virtual stop in about the 1980s. However, many of the existing refineries in
the United States have revamped many of their units and/or constructed add-on units in order to:
increase their crude oil processing capacity, increase the octane rating of their product gasoline,
lower the sulfur content of their diesel fuel and home heating fuels to comply with environmental
regulations and comply with environmental air pollution and water pollution requirements.
Processing units used in refineries

 Crude Oil Distillation unit: Distills the incoming crude oil into various fractions for
further processing in other units.
 Vacuum distillation unit: Further distills the residue oil from the bottom of the crude oil
distillation unit. The vacuum distillation is performed at a pressure well below
atmospheric pressure.
 Naphtha hydrotreater unit: Uses hydrogen to desulfurize the naphtha fraction from the
crude oil distillation or other units within the refinery.
 Catalytic reforming unit: Converts the desulfurized naphtha molecules into higher-octane
molecules to produce reformate, which is a component of the end-product gasoline or
petrol.
 Alkylation unit: Converts isobutane and butylenes into alkylate, which is a very high-
octane component of the end-product gasoline or petrol.
 Isomerization unit: Converts linear molecules such as normal pentane into higher-octane
branched molecules for blending into the end-product gasoline. Also used to convert
linear normal butane into isobutane for use in the alkylation unit.
 Distillate hydrotreater unit: Uses hydrogen to desulfurize some of the other distilled
fractions from the crude oil distillation unit (such as diesel oil).
 Merox (mercaptan oxidizer) or similar units: Desulfurize LPG, kerosene or jet fuel by
oxidizing undesired mercaptans to organic disulfides.
 Amine gas treater, Claus unit, and tail gas treatment for converting hydrogen sulfide gas
from the hydrotreaters into end-product elemental sulfur. The large majority of the
64,000,000 metric tons of sulfur produced worldwide in 2005 was byproduct sulfur from
petroleum refining and natural gas processing plants.[8][9]
 Fluid catalytic cracking (FCC) unit: Upgrades the heavier, higher-boiling fractions from
the crude oil distillation by converting them into lighter and lower boiling, more valuable
products.
 Hydrocracker unit: Uses hydrogen to upgrade heavier fractions from the crude oil
distillation and the vacuum distillation units into lighter, more valuable products.
 Visbreaker unit upgrades heavy residual oils from the vacuum distillation unit by
thermally cracking them into lighter, more valuable reduced viscosity products.
 Delayed coking and fluid coker units: Convert very heavy residual oils into end-product
petroleum coke as well as naphtha and diesel oil by-products.
Auxiliary facilities required in refineries

 Steam reformer unit: Converts natural gas into hydrogen for the hydrotreaters and/or the
hydrocracker.
 Sour water stripper unit: Uses steam to remove hydrogen sulfide gas from various
wastewater streams for subsequent conversion into end-product sulfur in the Claus unit.
[10]
 Utility units such as cooling towers for furnishing circulating cooling water, steam
generators, instrument air systems for pneumatically operated control valves and an
electrical substation.
 Wastewater collection and treating systems consisting of API separators, dissolved air
flotation (DAF) units and some type of further treatment (such as an activated sludge
biotreater) to make the wastewaters suitable for reuse or for disposal.[10]
 Liquified gas (LPG) storage vessels for propane and similar gaseous fuels at a pressure
sufficient to maintain them in liquid form. These are usually spherical vessels or bullets
(horizontal vessels with rounded ends).
 Storage tanks for crude oil and finished products, usually vertical, cylindrical vessels with
some sort of vapour emission control and surrounded by an earthen berm to contain
liquid spills.
The crude oil distillation unit

The crude oil distillation unit (CDU) is the first processing unit in virtually all petroleum
refineries. The CDU distills the incoming crude oil into various fractions of different boiling
ranges, each of which are then processed further in the other refinery processing units. The CDU
is often referred to as the atmospheric distillation unit because it operates at slightly above
atmospheric pressure.[1][2][11]
Below is a schematic flow diagram of a typical crude oil distillation unit. The incoming crude oil
is preheated by exchanging heat with some of the hot, distilled fractions and other streams. It is
then desalted to remove inorganic salts (primarily sodium chloride).
Following the desalter, the crude oil is further heated by exchanging heat with some of the hot,
distilled fractions and other streams. It is then heated in a fuel-fired furnace (fired heater) to a
temperature of about 398 °C and routed into the bottom of the distillation unit.
The cooling and condensing of the distillation tower overhead is provided partially by
exchanging heat with the incoming crude oil and partially by either an air-cooled or water-cooled
condenser. Additional heat is removed from the distillation column by a pumparound system as
shown in the diagram below.
As shown in the flow diagram, the overhead distillate fraction from the distillation column is
naphtha. The fractions removed from the side of the distillation column at various points
between the column top and bottom are called sidecuts. Each of the sidecuts (i.e., the kerosene,
light gas oil and heavy gas oil) is cooled by exchanging heat with the incoming crude oil. All of
the fractions (i.e., the overhead naphtha, the sidecuts and the bottom residue) are sent to
intermediate storage tanks before being processed further.
Schematic flow diagram of a typical crude oil distillation unit as used in petroleum crude oil
refineries.
Flow diagram of a typical petroleum refinery

The image below is a schematic flow diagram of a typical petroleum refinery that depicts the
various refining processes and the flow of intermediate product streams that occurs between the
inlet crude oil feedstock and the final end-products.
The diagram depicts only one of the literally hundreds of different oil refinery configurations.
The diagram also does not include any of the usual refinery facilities providing utilities such as
steam, cooling water, and electric power as well as storage tanks for crude oil feedstock and for
intermediate products and end products.[1][2][12]
A schematic flow diagram of a typical petroleum refinery.
Refining end-products
The primary end-products produced in petroleum refining may be grouped into four categories:
light distillates, middle distillates, heavy distillates and others.
Light distillates
 Liquid petroleum gas (LPG)

 Gasoline (also known as petrol)
 Heavy Naphtha
 Light Naphtha
Middle distillates
 Kerosene
 Automotive and rail-road diesel fuels
 Residential heating fuel
 Other light fuel oils
Heavy distillates
 Heavy fuel oils

 Bunker fuel oil and other residual fuel oils
 octane and other stuff

Petroleum Refining Processes Are The

Uploaded by

Copyright:

Available Formats

Petroleum Refining Processes Are The

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Petroleum Refining Processes Are The

Uploaded by

Copyright:

Available Formats

Petroleum refining processes

From Wikipedia, the free encyclopedia

Petroleum refinery in Anacortes, Washington, United States

Processing units used in refineries

Auxiliary facilities required in refineries

The crude oil distillation unit

Flow diagram of a typical petroleum refinery

 Liquid petroleum gas (LPG)

 Heavy fuel oils

You might also like