TUBING

The tubing is normally used to extract liquids and gas from oil/gas- • Cold-resistant tubing
bearing formations, inject water and compressed air (gas) into oil and gas • Higher operational reliability tubing
wells, and perform various types of well reconditioning and workover • Improved permeability tubing
operations. These are pipes threaded at both ends and complete with a • Type F-3,2 thread-connection tubing
coupling screwed on one end. • Type T100, T100NV premium class high-reliability pressure-tight
The tubing is manufactured with plain or externally upset ends and threaded connections tubing (with the possibility to make-up with
box coupling, and the following options or their combinations can be type NEW VAM and VAGT threads)
available: • Special-purpose tubing
• Standard tubing The tubing is manufactured on high-technology equipment at the
• High-strength tubing Pervouralsk Pipe Plant. All seamless tubing production phases fully
• Corrosion-resistant tubing (Grade 1Cr) comply with ISO 9001, API Specification Q1 and API Spec 5CT.

API SPEC 5CT TUBING

Size
Thread Type Weight, lb/ft Outer Diameter Grade
Wall Thickness, mm Length, m
inch mm
4.70 2 3/8 60.32 4.83

6.50 5.51

External Upset Tubing (EU) 7.90 2 7/8 73.02 7.01

8.70 7.82

9.30 3 1/2 88.90 6.45

J55
4.00 4.24 N80 type 1
2 3/8 60.32 N80 type Q
4.60 4.83 L80 type 1
R2 8.53–10.36
6.40 5.51 R95
C90 type 1
7.80 2 7/8 73.02 7.01 Т95 type 1
P110 A.10 SR16
Non-Upset Tubing (NU) 8.60 7.82

7.70 5.49

9.20 3 1/2 88.90 6.45

10.20 7.34

12.60 4 1/2 114.30 6.88

TUBING WITH TYPE F THREADED CONNECTION

Size
Thread Type Weight, lb/ft Outer Diameter Grade
Wall Thickness, mm Length, m
inch mm
6.50 5.51
2 7/8 73.02 N80 type 1
Rounded Triangular Thread With 7.90 7.01 N80 type Q
R2 8.53–10.36
3.175 mm Pitch (F) 9.25 6.50 L80 type 1
3 1/2 88.90 R95
11.10 8.00

TUBING PREMIUM CONNECTIONS

Premium Connection Size
T100NV Outer Diameter
(compatible Weight, lb/ft Grade
T100 with VAGT Wall Thickness, mm Length, m
and NewVAM inch mm
threads)
4.70 2 3/8 60.32 4.83

6.50 5.51
2 7/8 73.02
7.90 7.01
J55
7.70 5.49 N80 type Q
R2 8.53–10.36 L80 type 1
9.20 3 1/2 88.90 6.45 R95
C90 type 1
10.20 7.34 P110 A.10 SR16
12.60 6.88
4 1/2 114.30
15.10 8.56
CASING

The casing pipes are used to control wellbore walls during well • Higher operational reliability casing
construction and operation. These are pipes threaded at both ends and • High-reliability pressure-tight premium threaded connections
complete with a coupling screwed on one end. C100, C100HT, C230
The casing tubes are seamless tubes complete with couplings, and the The casing tubing is manufactured on high-technology equipment at
following options or their combinations are available: the Pervouralsk Pipe Plant. All seamless casing manufacture phases
• Standard casing fully comply with ISO 9001 and API Specification Q1, API Spec 5CT.
• High-strength casing 100% of casing tubes and tube coupling are subject to nondestructive
• Corrosion-resistant casing (Grade 1Cr) control.
• Cold-resistant casing

API SPEC 5CT CASING

Size

Thread Type Weight, lb/ft Outer Diameter Grade

Wall Thickness, mm Length, m
inch mm

9.50 5.21

10.50 5.69

11.60 4 1/2 114.30 6.35

13.50 7.37

15.10 8.56

14.00 6.20

15.50 6.98
J55
17.00 5 1/2 139.70 7.72
К55
Short Round Thread Casing (SC); 20.00 9.17 M65
R2 8.53–10.36
Long Round Thread Casing (LC) N80 type Q
23.00 10.54 R3 10.36–11.87
Buttress Thread Casing (BC) L80 type 1
R95
20.00 7.32
P110 A.10 SR16
24.00 8.94
6 5/8 168.28
28.00 10.59

32.00 12.06

23.00 8.05
26.00 9.19
7 177.80
29.00 10.36
32.00 11,51

CASING PREMIUM CONNECTIONS

Size
Thread Type Weight, lb/ft Outer Diameter Grade
Wall Thickness, mm Length, m
inch mm
15.50 4 1/2 114.30 7.37
17.00 7.72
20.00 9.17
5 1/2 139.70
23.00 10.54
26.00 12.09 J55
К55
Gas-tight premium threads 24.00 8.94 M65
R2 8.53–10.36
C100, C100HT 28.00 10.59 N80 type Q
6 5/8 168.28 R3 10.36–11.87
(high-torque option) and C230 32.00 12.06 L80 type 1
R95
36.00 13.34 P110 A.10 SR16
26.00 9.19
29.00 10.36
7 177.80
32.00 11.51
35.00 12.65