27S Electric Drop Feed Hog

PETERSON 27S ELECTRIC DROP FEED HOG

Simple and Efficient Wood Waste Reduction

27S Installation

2-Stage Grinding Process Two Rotor Styles Available Maximum Power with a High Use Peterson Bits and Grates
Feed material is gravity fed and A 20-bit drum rotor, or 18-bit Torque Electric Motor for the Best Quality Product
fractured against a heavy-duty pinned rotor (illustrated) are The 27S uses a crusher duty Peterson offers a wide variety
anvil (1) and sized through four available, with a wide variety of electric motor that has a rugged of durable, long-lasting bits and
grates (2), quickly and efficiently bit styles available depending on cast-iron frame and features a grates to enable you to produce
reducing material size. your application. dynamically balanced die-cast exactly the products your
aluminum rotor for durability customers demand.
and long wear.

The Peterson 27S Electric Drop start controls. The 27S is a drop thick, abrasion resistant steel, to
Feed Hog is a wood waste pro- feed design, where material is protect the rotor, and facilitate a
cessing machine, designed for gravity fed into the hopper, and is long wear life.
applications that need a small reduced against an anvil and sized
footprint, excellent productivity, through four grates which can The 27S is easily serviced by large
and easy maintenance. be easily changed to match your access doors on the front and
product specification. rear the machine, allowing easy
Based on Peterson’s proven bit and grate service, minimizing
2700-series rotor and grate design, The 27S is available with either maintenance and machine
the 27S Drop Feed Hog is a simple a pinned or drum rotor. The mill inspection time.
and robust design that is ideal for assembly is protected with a
sizing odd shaped materials. variety of shear pins, designed to
break away under a heavy impact
The 27S uses a 150 to 400 hp of trapped material, protecting
(112–300 kW) electrical motor that your investment. The sides of the
can be powered by a VFD or soft grinding chamber are made from
 27S Dimensions
PETERSON 27S ELECTRIC DROP FEED HOG

27S Specifications
Dimensions Rotor
A Overall Length 13' 2" (400 cm) Rotor Shaft Size 51/8" (130 mm) @ bearing, 5¾" (146 mm) @ center
B Overall Width 6' 7" (201 cm) Rotor Speed 10,362 fpm (3158 mpm) @ 2100 rpm (engine)
C Overall Height 6' 9" (204 cm) Rotor Width 59¾" (152 cm)
D Grinder Length 6' 8" (203 cm) Rotor Diameter 32" (81 cm)
E Grinder Width 6' 1" (184 cm) Bit Size (width x height) 2¾ x 5" (70 x 127 mm)
F Grinder Height 5' 8" (173 cm) Number of Bits 20 Drum Rotor, 18 Pinned Rotor
G Direct Drive Motor Height 2' 4" (70 cm)
Grates
H Direct Drive Motor Centerline 2' 7" (79 cm)
Number of Grate Sections 4
I In-feed Length Clearance 1' 8" (51 cm)
Total Grate Area 3024 in2 (19 509 cm2)
J In-feed Width Clearance 2' (61 cm)
Grate Coverage 180 degrees
K In-feed Length 5' 1 " (154 cm)
Grate Thickness 1" (25 mm)
L In-feed Width 2' 2" (65 cm)
Optional Equipment
Weight
Pinned and Drum rotor options available
Machine Weight* Approx. 18,000 lbs (8165 kg)
Support Structure
*Varies based on optional equipment and machine configuration.
Powertrain
Electric Power 460 volt, 60Hz, 3-phase electric
Rotor Drive Motors crusher duty, 150–400 hp (112–300 kW)
Belt or Direct Drive to Rotor (Direct Drive Illustrated)
Feed System
Feed Opening (width x height) 2' 2" x 5' 1 " (65 x 154 cm)

Measurements are rounded to the nearest whole

03/21/2017