CCNA Access List Sim 2: Read More

Question
This task requires you to use the CLI of Sw-AC3 to answer five multiple-choice questions. This does
not require any configuration.
To answer the multiple-choice questions, click on the numbered boxes in the right panel.
There are five multiple-choice questions with this task. Be sure to answer all five questions before
leaving this item.
READ MORE…
CCNA Access List Sim 2

October 26th, 2010in CCNA Lab Sim
Question
A network associate is adding security to the configuration of the Corp1 router. The user on host C
should be able to use a web browser to access financial information from the Finance Web Server. No
other hosts from the LAN nor the Core should be able to use a web browser to access this server.
Since there are multiple resources for the corporation at this location including other resources on the
Finance Web Server, all other traffic should be allowed.
The task is to create and apply an access-list with no more than three statements that will allow ONLY
host C web access to the Finance Web Server. No other hosts will have web access to the Finance Web
Server. All other traffic is permitted.
Access to the router CLI can be gained by clicking on the appropriate host.
All passwords have been temporarily set to “cisco”.

The Core connection uses an IP address of 198.18.196.65
The computers in the Hosts LAN have been assigned addresses of 192.168.33.1 – 192.168.33.254
Host A 192.168.33.1
Host B 192.168.33.2
Host C 192.168.33.3
Host D 192.168.33.4
The servers in the Server LAN have been assigned addresses of 172.22.242.17 – 172.22.242.30
The Finance Web Server is assigned an IP address of 172.22.242.23.
Answer and Explanation
READ MORE…
Contact Me
October 26th, 2010in Announcements
If you have a problem or question regarding 9tut.com, please send me an email to [email protected].
We will be happy to help and respond within four working days. Please notice that this email is only
used to answer anything related to 9tut website. If you have any questions related to the CCNA exam,
please ask it in our forum http://www.certprepare.com/forum. We visit the forum more often than
reading the email!
We added a new section – CCNA self study (http://www.9tut.com/category/practice-ccna-gns3-labs).

Now it has only a few GNS3 labs but we will try to add more soon. Hope you will like it!
CCNA FAQs & Tips

October 25th, 2010in Announcements
(Updated on Dec-03-2010)
CCNA is a long topic to talk about and there are many tips that can help you save much time when
sitting in the exam hall. From the comments here and information from other places, this article tries
to summarize all the CCNA frequently asked questions to save you some time. Please feel free to ask
anything that you are unclear about CCNA so that all of us can help you. I will update this article
frequently to bring you the newest information about this exam.
READ MORE…
CCNA Access List Sim

Question
An administrator is trying to ping and telnet from Switch to Router with the results shown below:
Switch>
Switch> ping 10.4.4.3
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.4.4.3,timeout is 2 seconds:
.U.U.U
Success rate is 0 percent (0/5)
Switch>
Switch> telnet 10.4.4.3
Trying 10.4.4.3 …
% Destination unreachable; gateway or host down
Switch>
Click the console connected to Router and issue the appropriate commands to answer the questions.
Answer and Explanation:
READ MORE…
Practice Real CCNA Labs with Packet Tracer Simulator

Well, the title said it all. Here are some screenshots about the labs in Packet Tracer Simulator:
CCNA Drag And Drop SIM:

READ MORE…
CCNA NAT SIM Question 2

October 23rd, 2010in CCNA Lab Sim
Question:
You work as a network technician at 9tut.com. Study the exhibit carefully. You are required to perform configurations to enable
Internet access. The Router ISP has given you six public IP addresses in the 198.18.32.65 198.18.32.70/29 range.
9tut.com has 62 clients that needs to have simultaneous internet access. These local hosts use private IP addresses in the
192.168.6.65 – 192.168.6.126/26 range.
You need to configure Router1 using the PC1 console.
You have already made basic router configuration. You have also configured the appropriate NAT interfaces; NAT inside and
NAT outside respectively.
Now you are required to finish the configuration of Router1.
Solution:
READ MORE…
CCNA Implementation SIM

October 22nd, 2010in CCNA Lab Sim
This topology contains 3 routers and 1 switch. Complete the topology.
Drag the appropriate device icons to the labeled Device

Drag the appropriate connections to the locations labeled Connections.
Drag the appropriate IP addresses to the locations labeled IP address
(Hint: use the given host addresses and Main router information)
To remove a device or connection, drag it away from the topology.
Use information gathered from the Main router to complete the configuration of any
additional routers. No passwords are required to access the Main router. The config terminal
command has been disabled for the HQ router. The router does not require any configuration.
Configure each additional router with the following:
Configure the interfaces with the correct IP address and enable the interfaces.
Set the password to allow console access to consolepw
Set the password to allow telnet access to telnetpw
Set the password to allow privilege mode access to privpw
Note: Because routes are not being added to the configurations, you will not be able to ping
through the internetwork.
All devices have cable autosensing capabilities disabled.
All hosts are PC’s
Answer and explanation:
READ MORE…
CCNA Drag and Drop SIM Question

October 21st, 2010in CCNA Lab Sim
Question:
You have been hired by Specialty Hardware Incorporated to document the layout of the network.
Complete the following tasks: Complete the network topology shown in the graphic by dragging the
labels below with the appropriate router types, interface types, and IP addresses to the graphic . Find
the information you need by using the router console attached to the R-CENTER router.
Answer and explanation:
READ MORE…
CCNA EIGRP LAB Question

Question
After adding R3 router, no routing updates are being exchanged between R3 and the new location. All
other inter connectivity and Internet access for the existing locations of the company are working
properly.
The task is to identify the fault(s) and correct the router configuration to provide full connectivity
between the routers.
Access to the router CLI can be gained by clicking on the appropriate host. All passwords on all routers
are cisco.
IP addresses are listed in the chart below.
R1 R2
Fa0/0: 192.168.77.33 Fa0/0: 192.168.60.97
S1/0: 198.0.18.6 Fa0/1: 192.168.60.113
S0/1: 192.168.60.25 S0/0: 192.168.36.14
R3 R4
Fa0/0: 192.168.77.34 Fa0/0: 192.168.60.129
Fa0/1: 192.168.60.65 Fa0/1: 192.168.60.145
Fa1/0: 192.168.60.81 S0/1: 192.168.60.26
Answer and explanation
READ MORE…
CCNA Configuration SIM Question

Question:
To configure the router (R2-RC) click on the console host icon that is connected to a router by a serial
console cable (shown in the diagram as a dashed black line)
CCNA Training Company recently installed a new router in their office. Complete the network
installation by performing the initial router configurations and configuring RIPV2 routing using the
router command line interface (CLI) on the R2-RC.
Name of the router is R2-RC

Enable-secret password is cisco1
The password to access user EXEC mode using the console is cisco2
The password to allow telnet access to the router is cisco3
IPV4 addresses must be configured as follows:
Ethernet network 209.165.202.128/27 – router has last assignable host address in subnet
Serial network is 192.0.2.16/28 – router has last assignable host address in the subnet. Interfaces
should be enabled.
Router protocol is RIP V2
Attention :
In practical examinations, please note the following, the actual information will prevail.
1. Name of the router is xxx
2. Enable-secret password is xxx
3. Password to access user EXEC mode using the console is xxx
4. The password to allow telnet access to the router is xxx
5. IP information
Solution:
READ MORE…
CCNA NAT SIM Question 1

Question
A network associate is configuring a router for the CCNA Training company to provide internet access.
The ISP has provided the company six public IP addresses of 198.18.184.105 198.18.184.110. The
company has 14 hosts that need to access the internet simultaneously. The hosts in the CCNA
Training company LAN have been assigned private space addresses in the range of 192.168.100.17 –
192.168.100.30.
The task is to complete the NAT configuration using all IP addresses assigned by the ISP to provide
Internet access for the hosts in the Weaver LAN. Functionality can be tested by clicking on the host
provided for testing.
Configuration information
router name – Weaver
inside global addresses – 198.18.184.105 198.18.184.110/29
inside local addresses – 192.168.100.17 – 192.168.100.30/28
number of inside hosts – 14
The following have already been configured on the router：

- The basic router configuration
- The appropriate interfaces have been configured for NAT inside and NAT outside
- The appropriate static routes have also been configured (since the company will be a stub network, no routing protocol will be
required.)
- All passwords have been temporarily set to “cisco”
Solution:
READ MORE…
9tut.net for ICND 1 & ICND 2 has been launched!

October 17th, 2010in Network Resources
Today, I am happy to announce the launch of 9tut.net website which is built mainly for CCNA
candidates who get the CCNA certification by taking two exams ICND 1 and ICND 2. In 9tut.net you
will find the OSPF lab sim that many readers here debate about its existence in the CCNA 640-802
exam. The answer is no, you will only see it in the ICND 2 exam.
READ MORE…

CCNA Access List Sim 2: Read More

Uploaded by

Copyright:

Available Formats

CCNA Access List Sim 2: Read More

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

CCNA Access List Sim 2: Read More

Uploaded by

Copyright:

Available Formats

Question

CCNA Access List Sim 2

All passwords have been temporarily set to “cisco”.

Answer and Explanation

We added a new section – CCNA self study (http://www.9tut.com/category/practice-ccna-gns3-labs).

CCNA FAQs & Tips

CCNA Access List Sim

Answer and Explanation:

Practice Real CCNA Labs with Packet Tracer Simulator

CCNA Drag And Drop SIM:

CCNA NAT SIM Question 2

CCNA Implementation SIM

Drag the appropriate device icons to the labeled Device

Configure each additional router with the following:

CCNA Drag and Drop SIM Question

Answer and explanation:

CCNA EIGRP LAB Question

IP addresses are listed in the chart below.

CCNA Configuration SIM Question

Name of the router is R2-RC

CCNA NAT SIM Question 1

The following have already been configured on the router：

9tut.net for ICND 1 & ICND 2 has been launched!

You might also like