Register your product and get support at

www.philips.com/welcome

HTS3510
HTS3520

More user manuals on ManualsBase.com

More user manuals on ManualsBase.com
 8 Product specications 14
Contents

English
1 Notice 2 9 Troubleshooting 16
Copyright 2
Compliance 2 10 Index 17
Mains fuse (UK only) 2
Trademarks 2

2 Important 3
Safety 3
Product care 4
Disposal of your old product and batteries 4

3 Your home theater 5

Main unit 5
Remote control 5

4 Connect your home theater 7

Connectors 7
Connect to the TV 7
Connect audio from TV or other devices 8

5 Use your home theater 8

Before you start 8
Choose your sound 8
Play a disc 9
Play from a USB storage device 10
More play features for disc or USB 10
Play from radio 10
Play audio from TV or other devices 11
Create MP3 audio les 11

6 Change settings 12
Access the setup menu 12
Change general settings 12
Change audio settings 12
Change video settings 13
Change preference settings 13

7 Update software 14
Check software version 14
Update software from a CD-R or USB 14

EN 1

More user manuals on ManualsBase.com

 1 Notice Trademarks

Copyright
Manufactured under license from Dolby
Laboratories. Dolby, Pro Logic, and the
double-D symbol are trademarks of Dolby
Laboratories.
This item incorporates copy protection technology
that is protected by U.S. patents and other
intellectual property rights of Rovi Corporation.
Reverse engineering and disassembly are
prohibited.
DivX®, DivX Certied® and associated logos are
Copyright in the UK registered trademarks of DivX, Inc. and are used
under license.
Recording and playback of material may require
DivX Ultra® Certied to play DivX® video with
consent. See Copyright Act 1956 and The
advanced features and premium content.
Performers Protection Acts 1958 to 1972.
ABOUT DIVX VIDEO: DivX® is a digital video
format created by DivX, Inc. This is an ofcial
Compliance DivX Certied device that plays DivX video.
Visit www.divx.com for more information and
software tools to convert your les into DivX
video.
ABOUT DIVX VIDEO-ON-DEMAND: This
This product is in compliance with the essential DivX Certied ® device must be registered in
requirements and other relevant provisions of order to play DivX Video-on-Demand (VOD)
Directives 2006/95/EC (Low Voltage), 2004/108/ content. To generate the registration code,
EC (EMC). locate the DivX VOD section in your device
setup menu. Go to vod.divx.com with this code
to complete the registration process and learn
Mains fuse (UK only) more about DivX VOD.

This product is tted with an approved moulded

plug. Should it become necessary to replace the
mains fuse, this must be replaced with a fuse of
the same value as indicated on the plug (example Windows Media and the Windows logo are
10A). trademarks, or registered trademarks of
Microsoft Corporation in the United States and/
1 Remove fuse cover and fuse.
or other countries.
2 The replacement fuse must comply with BS
1362 and have the ASTA approval mark. If
the fuse is lost, contact your dealer in order
to verify the correct type. HDMI, and HDMI logo and High-Denition
3 Re t the fuse cover. Multimedia Interface are trademarks or
registered trademarks of HDMI licensing LLC.
Note

• To conform with the EMC directive

(2004/108/EC), the mains plug on this product
must not be detached from the mains cord.

2 EN

More user manuals on ManualsBase.com

 2 Important

English
Read and understand all instructions before you
The USB-IF Logos are trademarks of Universal use your home theater. If damage is caused by
Serial Bus Implementers Forum, inc. failure to follow instructions, the warranty does
not apply.

Safety
CLASS 1
LASER PRODUCT
Risk of electric shock or re!
• Never expose the product and accessories
to rain or water. Never place liquid
containers, such as vases, near the product.
If liquids are spilt on or into the product,
disconnect it from the power outlet
immediately. Contact Philips Consumer Care
to have the product checked before use.
• Never place the product and accessories
near naked ames or other heat sources,
including direct sunlight.
• Never insert objects into the ventilation
slots or other openings on the product.
• Where the mains plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
• Disconnect the product from the power
outlet before lightning storms.
• When you disconnect the power cord,
always pull the plug, never the cable.
Risk of short circuit or re!
• Before you connect the product to the
power outlet, ensure that the power
voltage matches the value printed on the
back or bottom of the product. Never
connect the product to the power outlet if
the voltage is different.
Risk of injury or damage to the home theater!
• For wall-mountable products, use only the
supplied wall mount bracket. Secure the wall
mount to a wall that can support the combined
weight of the product and the wall mount.
Koninklijke Philips Electronics N.V. bears no
responsibility for improper wall mounting that
results in accident, injury or damage.
• For speakers with stands, use only the
supplied stands. Secure the stands to the
speakers tightly. Place the assembled stands
on at, level surfaces that can support the
combined weight of the speaker and stand.

EN 3

More user manuals on ManualsBase.com

 • Never place the product or any objects Disposal of your old product
on power cords or on other electrical
equipment. and batteries
• If the product is transported in
temperatures below 5°C, unpack the
product and wait until its temperature
matches room temperature before
connecting it to the power outlet. Your product is designed and manufactured with
• Visible and invisible laser radiation when high quality materials and components, which can
open. Avoid exposure to beam. be recycled and reused.
• Do not touch the disc optical lens inside the
disc compartment.
Risk of overheating!
• Never install this product in a conned
space. Always leave a space of at least four When this crossed-out wheeled bin symbol is
inches around the product for ventilation. attached to a product it means that the product
Ensure curtains or other objects never is covered by the European Directive 2002/96/
cover the ventilation slots on the product. EC. Please inform yourself about the local separate
Risk of contamination! collection system for electrical and electronic
• Do not mix batteries (old and new or products.
carbon and alkaline, etc.). Please act according to your local rules and do not
• Remove batteries if they are exhausted or dispose of your old products with your normal
if the remote control is not to be used for a household waste.
long time. Correct disposal of your old product helps to
• Batteries contain chemical substances, they prevent potential negative consequences for the
should be disposed of properly. environment and human health.

Product care
• Do not insert any objects other than discs Your product contains batteries covered by the
into the disc compartment. European Directive 2006/66/EC, which cannot be
• Do not insert warped or cracked discs into disposed with normal household waste.
the disc compartment. Please inform yourself about the local rules on
• Remove discs from the disc compartment separate collection of batteries because correct
if you are not using the product for an disposal helps to prevent negative consequences
extended period of time. for the environmental and human health.
• Only use microber cloth to clean the
product.

4 EN

More user manuals on ManualsBase.com

 3 Your home theater Remote control

English
Congratulations on your purchase, and welcome
to Philips! To fully benet from the support that
Philips offers, register your home theater at a
www.philips.com/welcome.
b
Main unit v c
d
u
e

t f
a Disc compartment
b (Open/Close) g
Opens or closes the disc compartment.
s
c (Play/Pause)
Starts, pauses or resumes play. h
d (Stop) r
• Stops play. i
• In radio mode, erases the current q
preset radio station.
j
e (Standby-On)
Switches the home theater on or to
standby. p k
f SOURCE o l
Selects an audio/video source for the home
theater. n m
g /
• Skips to the previous or next track,
chapter or le.
• In radio mode, selects a preset radio
station.
h Display panel a (Standby-On)
Switches the home theater on or to
i Volume control wheel standby.
b OPEN/CLOSE
Opens or closes the disc compartment.
c SLEEP
Switches the home theater to standby after
the preset time selected.
d SETUP
Accesses or exits the setup menu.

EN 5

More user manuals on ManualsBase.com

 e (Navigation buttons) u OK
• Navigate menus. Conrms an entry or selection.
• In video mode, press left or right to v Source buttons
fast backward or fast forward. • AUDIO SOURCE : Selects an audio
• In radio mode, press left or right to input source.
search a radio station; press up or • RADIO: Switches to FM radio.
down to ne tune a radio frequency.
• USB : Switches to USB storage device.
f INFO • DISC: Switches to disc source.
Displays information about what is playing.
g Playback buttons
Control playback.
h SURR (Surround Sound)
Switches to surround sound or stereo
sound.
i AUDIO SYNC
• Selects an audio language or channel.
• Press and hold to synchronize audio
with video. Use with +/-.
j Numeric buttons
Selects an item to play.
k SUBTITLE
Selects subtitle language for video.
l SCREEN FIT
Fits the picture format to the TV screen.
m CREATE MP3/ ZOOM
• Accesses the menu to create MP3.
• Zooms into a video scene or picture.
n REPEAT A-B
Marks two points within a chapter or track
for repeat play, or turns off repeat mode.
o REPEAT / PROGRAM
• Selects a repeat or shufe mode.
• In radio mode, programs radio stations.
p ANGLE
Displays options for different camera angles.
q SOUND
Selects a sound mode.
r VOL +/-
Increases or decreases volume.
s (Mute)
Mutes or restores volume.
t BACK
Returns to a previous menu screen.

6 EN

More user manuals on ManualsBase.com

 d HDMI OUT
4 Connect your home Connects to the HDMI input on the TV.

English
theater e VIDEO OUT
Connects to the composite video input on
This section helps you connect your home theater the TV.
to a TV and other devices. The basic connections f AUDIO IN-AUX
of the home theater with its accessories are Connects to the analog audio output on the
provided in the Quick Start. For a comprehensive TV or an analog device.
interactive guide, see www.connectivityguide.
g FM ANTENNA
philips.com.
Connects the FM antenna for radio
reception.
Note

• Refer to the type plate at the back or bottom Connect to the TV

of the product for identication and supply
ratings.
• Before you make or change any connections, Connect your home theater directly to a TV
ensure that all devices are disconnected from through one of the following connectors (from
the power outlet. highest to basic quality video):
a HDMI
b SCART
Connectors c Composite video
Side connectors
Option 1: Connect to the TV through
HDMI

Note

• If the HDTV has a DVI connector, connect

using an HDMI/DVI adapter.
a (USB)
Audio, video or picture input from a USB (Cable not supplied)
storage device.

Back connectors
TV

a AC MAINS~
Connects to the power supply.
b SPEAKERS
Connects to the supplied speakers and
subwoofer.
c SCART TO TV
Connects to the scart input on the TV.

EN 7

More user manuals on ManualsBase.com

 Option 2: Connect to the TV through Scart 5 Use your home
(Cable not supplied)
theater
This section helps you use the home theater to
TV play media from a wide range of sources.

Before you start

Check that you:
• Make the necessary connections and complete
Option 3: Connect to the TV through the setup as described in the Quick Start.
composite video (CVBS) • Switch the TV to the correct source for the
home theater.
Note

• The composite video cable or connector might Choose your sound

be labeled AV IN , VIDEO IN , COMPOSITE or
BASEBAND. This section helps you choose the ideal sound for
your video or music.

Change sound mode

TV
Select predened sound modes to suit your
video or music.

Connect audio from TV or

Press SOUND repeatedly to cycle through the
other devices available sound modes.
Use your home theater to play audio from the
Sound mode Description
TV or other device such as a cable box.
ACTION / Enhanced low and high-range.
ROCK Ideal for action movies and rock
Tip
or pop music.
• Press AUDIO SOURCE to select the audio DRAMA / Clear mid and high-range. Ideal
output of your connection. JAZZ for drama movies and jazz music.
CONCERT/ Neutral sound. Ideal for live
CLASSIC concerts and classical music.
SPORTS Moderate mid-range and surround
effects for clear vocals and the
TV
atmosphere of a live sport venue.
NIGHT Dynamically controlled sound
mode suitable for watching
movies at night or for non-
intrusive background music.

8 EN

More user manuals on ManualsBase.com

 Change surround sound mode Use video options
Experience an immersive audio experience with Access several useful features while viewing video.

English
surround sound modes.
Note

• Available video options depend on the video

source.

Press SURR repeatedly to cycle through the Button Action

available surround modes. / Searches slow-backward or
slow-forward. Press repeatedly to
Option Description change the search speed.
MULTI- Immersive multi-channel For VCD/SVCD, slow-backward
CHANNEL sound for an enhanced movie search is not available.
experience. AUDIO Selects an audio language or
STEREO Two-channel stereo sound. Ideal SYNC channel.
for listening to music. SUBTITLE Selects subtitle language for video.
INFO Displays information about what
is playing.
Play a disc REPEAT Repeats a chapter or title.
ANGLE Displays options for different
The home theater can play a wide variety of discs, camera angles.
including video, audio and mixed media (for example,
a CD-R that contains JPEG pictures and MP3 music).
1 Insert a disc into the home theater. Use picture options
2 Press DISC . Access several useful features while viewing
» The disc plays or the disc main menu pictures.
appears.
3 Press the following buttons to control play: Button Action
/ Rotates the picture counter-
Button Action clockwise or clockwise.
Navigation Navigate menus. / Skips to the previous or next
buttons picture.
OK Conrms an entry or selection. REPEAT Repeats a single le in the folder or
Starts, pauses or resumes play. repeats the entire folder.
Shufes les in a folder.
Stops play.
INFO Displays photo albums in a
/ Skips to the previous or next thumbnail overview.
track, chapter or le.
/ Fast backwards or fast forwards.
Press repeatedly to change the
search speed.
Use audio options
ZOOM Zooms into a video scene or picture. Access several useful features while audio is
REPEAT A-B Marks two points within a played.
chapter or track for repeat play,
or turns off repeat mode. Button Action
SCREEN Fits the picture format to the TV REPEAT Repeats a track, the entire disc
FIT screen. or shufe tracks.

EN 9

More user manuals on ManualsBase.com

 Play from a USB storage device Quick skip play to a specic time
Quick skip to a specic part of a video by
The home theater is tted with a USB connector entering the time of a scene.
that allows you to view pictures, listen to music or
watch movies stored on a USB storage device.
1 During video play, press INFO.

1 Connect the USB storage device to the

2 Press the Navigation buttons and OK to
select:
home theater.
2 Press USB .
• [TT Time] : Title time.
» A content browser appears. • [Ch Time] : Chapter time.
3 Select a le, then press OK . • [Disc Time] : Disc time.
4 Press the playback buttons to control play • [Track Time] : Track time.
(see ‘Play a disc’ on page 9).
3 Enter the time of the scene, then press OK .

Note
Play from radio
• If the USB storage device does not  t into the
connector, use a USB extension cable.
• The home theater does not support digital The home theater can store up to 40 radio
cameras that need a computer program to stations.
display photos.
• The USB storage device must be FAT or DOS-
1 Check that the FM antenna is connected.
formatted, and Mass Storage Class compliant. 2 Press RADIO.
» “AUTO INSTALL...PRESS PLAY’ appears
on the display panel if you have not
installed any radio stations. Press .
More play features for disc or USB 3 Press the following buttons to control play:
Several advanced features are available for video or
Button Action
picture playback from a disc or USB storage device.
/ Selects a preset radio station.
/ Searches for a radio station.
Play a musical slideshow
Fine tunes a radio frequency.
Play music and pictures simultaneously to create Press and hold to erase the
a musical slideshow. The les must be stored on preset radio station.
the same disc or USB storage device. Press to stop the installation of
1 Select a music track, then press OK . radio stations.
2 Press BACK and go to the picture folder. PROGRAM Manual: Press once to access
3 Select a picture, then press OK to start program mode, and press again
slideshow. to store the radio station.
Automatic: Press and hold for ve
4 Press to stop slideshow. seconds to reinstall radio stations.
5 Press again to stop music.
Note
Synchronize audio with video • AM and digital radio are not supported.
If the audio and video are not synchronized, you • If no stereo signal is detected, or if fewer than
can delay the audio to match the video. ve stations are found, you are prompted to
install the radio stations again.
1 Press and hold AUDIO SYNC until the audio • For the best reception, place the antenna away
sync message appears on the display panel. from the TV or other sources of radiation.
2 Press +/- within ve seconds to sync the
audio with your video.

10 EN

More user manuals on ManualsBase.com

 Play audio from TV or other 8 Select [Start] in the menu to convert, then
press OK .
devices

English
» A new folder is created in the USB
storage device to store all the new MP3
Press AUDIO SOURCE repeatedly to select the audio les.
audio output of the connected device .
• To exit the menu, select [Exit] and
press OK .
Create MP3 audio les
Note
Use the home theater to convert audio CDs into
MP3 audio les. • During the conversion process, do not press
any buttons.
1 Insert an audio CD (CDDA/HDCD) into • DTS CDs and copy-protected CDs cannot be
the home theater. converted.
2 Connect a USB storage device to the home • Write-protected or password-protected USB
storage device cannot be used to store MP3
theater.
les.
3 When audio is played, press CREATE MP3.
4 Select [Yes] and press OK to conrm.

CREATE MP3
OPTIONS TRACK
Speed Normal Track01 04:14

Bitrate 128kbps Track02 04:17

Track03 03:58
CRT ID3 Yes
Track04 04:51
Device USB1
Track05 03:53
SUMMARY Track06 04:09
Select Track 0 Track07 04:38
Time 00:00

Start Exit Select All Deselect All

5 Select the settings in the [OPTIONS] panel,

then press OK .
• [Speed] : Selects the write-to-le
speed.
• [Bitrate] : Selects the conversion
quality.
• [CRT ID3] : Copies information on the
tracks in the MP3 les.
• [Device] : Selects the USB device
which you use to store the MP3 les.
6 Press to access the [TRACK] panel.
7 Select an audio track, then press OK .
• [Select All] : Selects all tracks.
• [Deselect all] : De-selects all tracks.

EN 11

More user manuals on ManualsBase.com

 6 Change settings Change general settings
This section helps you to change the settings of 1 Press SETUP.
your home theater. 2 Select [General Setup], then press OK .
3 Select and adjust the following settings:
Caution • [Disc Lock] : Restricts play to disc.
Password (PIN code) is required to
• Most of the settings are already congured
with the best value for the home theater.
unlock the disc before play.
Unless you have a specic reason to change a • [Display Dim] : Changes the brightness
setting, it is best to leave it at the default value. of the display panel.
• [OSD Language] : Selects the on-
screen display menu language.
Access the setup menu • [Screen Saver] : Enables or disables
screen saver mode. If enabled, the
screen enters idle mode after 10
1 Press SETUP. minutes of inactivity (for example, in
» The following menu appears. pause or stop mode).
• [Sleep Timer] : Sets a sleep timer to
Symbol Description switch the home theater to standby
after a specic time.
[General Setup]
• [Auto Standby] : Enables or disables
auto standby. If enabled, the home
[Audio Setup] theater switches to standby after 30
minutes of inactivity (for example, in
pause or stop mode).
[Video Setup] • [DivX® VOD Code] : Displays the
DivX VOD registration code for the
home theater.
[Preference Setup]
4 Press OK to conrm your choice.

2 Select a setup menu, then press OK . Note

See the following sections for information • Before you purchase DivX videos and play
about how to change the settings of your them on the home theater, register the home
home theater. theater on www.divx.com using the DivX
3 Press BACK to return to the previous VOD code.
menu, or press SETUP to exit.

Note Change audio settings

• You cannot change a setting that is grayed out.
1 Press SETUP.
2 Select [Audio Setup], then press OK .
3 Select and adjust the following settings:
• [Speakers Volume] : Sets the volume
of each speaker to obtain the ideal
audio balance.
• [Speakers Delay] : Sets the delay time
for center and rear speakers to obtain
an equal audio transmission from all
the speakers.

12 EN

More user manuals on ManualsBase.com

 • [HDMI Audio] : Enables or disables Change preference settings
HDMI audio output for the TV.

English
• [Audio Sync] : Sets a delay for audio 1 Press SETUP.
output when you play a video disc.
2 Select [Preference Setup], then press OK .
4 Press OK to conrm your choice.
3 Select and adjust the following settings:
• [Audio] : Selects audio language for
Note video.
• For settings related to HDMI, the TV must be • [Subtitle] : Selects subtitle language for
connected through HDMI. video.
• [Disc Menu] : Selects menu language
for video disc.
Change video settings • [Parental] : Restricts access to discs
that are recorded with ratings. To
play all discs irrespective of the rating,
1 Press SETUP. select level ‘8’.
2 Select [Video Setup], then press OK . • [PBC] : Displays or skips the content
3 Select and adjust the following settings: menu for VCD and SVCD discs.
• [TV System] : Selects a TV system that • [MP3/JPEG Display] : Displays the
is compatible with the TV. MP3/JPEG folders or all the les.
• [TV Display] : Selects a picture display • [Password] : Sets or changes a PIN
format to  t the TV screen.
code to play a restricted disc. Enter
• [Picture Settings] : Selects a ‘ 0000 ’ if you do not have a PIN or if
predened color setting. you have forgotten your PIN.
• [HDMI Setup] : Selects HDMI video • [DivX Subtitle] : Selects a character
resolution and the wide screen display set that supports the DivX subtitle.
format for the TV. The Wide Screen
Display option is only available for 16:9 • [Version Info.] : Displays the software
wide screen TV display setting. version for the home theater.
• [HD JPEG] : Enables or disables display • [Default] : Resets the home theater to
of high denition JPEG images. the default settings programmed at the
4 Press OK to conrm your choice. factory.
4 Press OK to conrm your choice.
Note
Note
• The best setting is automatically selected for
the TV. If you need to change the setting, • If your preferred disc language is not available,
ensure that the TV supports the new setting. you can select [Other] from the list and enter
• Some video settings depend on the video the 4-digit language code which can be found
source, ensure that the disc and the TV at the back of this manual.
support the setting or feature.
• For settings related to HDMI, the TV must be • If you select a language that is not available
connected through HDMI. on a disc, the home theater uses the default
language of the disc.
• You cannot reset disc lock, password (PIN
code) and parental control settings to their
default values.

EN 13

More user manuals on ManualsBase.com

 7 Update software 8 Product specifications
To check for new updates, compare the current
software version of your home theater with the Note
latest software version (if available) on the Philips
web site. • Specication and design are subject to change
without notice.

Region code
Check software version
The type plate on the back or bottom of the
home theater shows which regions it supports
1 Press SETUP.
2 Select [Preference Setup] > [Version Info.], Country DVD
then press OK .
» The software version is displayed. Europe, United Kingdom

Update software from a CD-R Asia Pacific, Taiwan, Korea

or USB
Latin America
1 Check for the latest software version on
www.philips.com/support.
• Search for your model and click on Australia, New Zealand
‘software&drivers’.
2 Download the software onto a CD-R or
USB storage device. Russia, India
3 Insert the CD-R or connect the USB
storage device to the home theater.
China
4 Follow the instructions on the TV to
conrm the update.
» When complete, the home theater
automatically switches off and on again. Playback media
• If not, disconnect the power cord for a DVD-Video, DVD+R/+RW, DVD-R/-RW, DVD+R DL,
few seconds and then reconnect it. CD-R/CD-RW, Audio CD,Video CD/SVCD, Picture CD,
MP3-CD,WMA-CD, DivX-CD, USB storage device
File Format
Caution
• Audio: .mp3, .wma
• Do not turn off the power or remove the • Video: .divx, .divx ultra, .mpeg, .mpg, .wmv
CD-R or USB storage device when the (simple prole)
software update is in progress because you • Picture: .jpeg, .jpg
might damage the home theater.
Amplier
• Total output power:
• HTS3510: 300 W RMS (30% THD)
• HTS3520: 600 W RMS (30% THD)
• Frequency response: 20 Hz-20 kHz / ±3dB
• Signal-to-noise ratio: > 65 dB (CCIR) /
(A-weighted)
• Input sensitivity:
• AUX: 2 V

14 EN

More user manuals on ManualsBase.com

 Video • Weight:
• Signal system: PAL / NTSC HTS3510: 0.68 kg

English
• HDMI output: 480i/576i, 480p/576p, 720p, HTS3520:
1080i, 1080p • Center: 0.77 kg
Audio • Front/Rear: 0.56 kg/each
• Sampling frequency: • Cable length:
• MP3: 32 kHz, 44.1 kHz, 48 kHz • Center: 3 m
• WMA: 44.1 kHz, 48 kHz • Front: 4 m
• Constant bit rate: • Rear: 10 m
• MP3: 112 kbps - 320 kbps Laser specication
• WMA: 48 kbps - 192 kbps • Type: Semiconductor laser GaAIAs (CD)
Radio • Wave length: 645 - 665 nm (DVD), 770 -
• Tuning range: FM 87.5-108 MHz (50 kHz) 800 nm (CD)
• Signal-to-noise ratio: FM 50 dB • Output power: 6 mW (DVD), 7 mW
• Frequency response: FM 180 Hz-10 kHz / (VCD/CD)
±6dB • Beam divergence: 60 degrees.
USB
• Compatibility: Hi-Speed USB (2.0)
• Class support: UMS (USB Mass Storage
Class)
• File system: FAT12, FAT16, FAT32
• Maximum memory support: < 160GB
Main Unit
• Power supply: 220-240V; ~50 Hz
• Power consumption: 100 W
• Standby power consumption:  0.9 W
• Dimensions (WxHxD): 360 x 58 x 320
(mm)
• Weight: 2.84 kg
Subwoofer
• Impedance: 8 ohm
• Speaker drivers: 165 mm (6.5”) woofer
• Frequency response: 20 Hz-150 kHz
• Dimensions (WxHxD): 120 x 307 x 369
(mm)
• Weight: 3.84 kg
• Cable length: 4.3 m
Speakers
• System: full range satellite
• Speaker impedance: 8 ohm (center), 4 ohm
(Front/Rear)
• Speaker drivers: 3” full range
• Frequency response: 150 Hz-20 kHz
• Dimensions (WxHxD):
HTS3510: 96 x 162 x 96 (mm)
HTS3520:
• Center: 160.9 x 95 x 92 (mm)
• Front/Rear: 95 x 160.9 x 87 (mm)

EN 15

More user manuals on ManualsBase.com

 No sound on HDMI connection.
9 Troubleshooting • You might not hear any sound if the
connected device is not HDCP (High-
bandwidth Digital Content Protection)
Warning compliant or only DVI compatible. Use an
• Risk of electric shock. Never remove the analog or digital audio connection.
casing of the product. • Ensure that the [HDMI Audio] is enabled.
No sound from TV program.
To keep the warranty valid, never try to repair the • Connect an audio cable from the audio input
product yourself. on the home theater to the audio output
If you have problems using this product, check the on the TV, then press AUDIO SOURCE
following points before you request service. If you repeatedly to select the correct audio source.
still have a problem, register your product and get Distorted sound or echo.
support at www.philips.com/welcome. • Ensure that the TV volume is muted or set
If you contact Philips, you will be asked for the to minimum if you are playing audio through
model and serial number of your product. The the home theater.
model number and serial number are on the back Audio and video are not synchronized.
or bottom of your product. Write the numbers • 1) Press and hold AUDIO SYNC . 2) Press
here: +/- within ve seconds.
Model No. __________________________
Serial No. ___________________________
Play
Disc cannot be played.
Main unit • Clean the disc.
The buttons on this home theater do not work. • Ensure that the home theater supports the
• Disconnect the home theater from the disc (see ‘Product specications’ on page 14).
power outlet for a few minutes, then • Ensure that the home theater supports the
reconnect. region code of the DVD.
• For DVD±RW or DVD±R, ensure that the
disc is nalized.
Picture
DivX video les cannot be played.
No picture. • Ensure that the DivX le is encoded
• Ensure that the TV is switched to the according to the ‘Home Theater Prole’
correct source for this home theater. with the DivX encoder.
• If this happens when you change the TV • Ensure that the DivX video le is complete.
system, switch to its default mode: 1) Press DivX subtitles do not display correctly.
. 2) Press . 3) Press SUBTITLE . • Ensure that the subtitle le name is the
No picture on HDMI connection. same as the movie le name.
• Check if the HDMI cable is faulty. Replace • Select the correct character set: 1) Press
with a new HDMI cable. SETUP. 2) Select [Preference Setup].
• If this happens when you change the HDMI 3) Select [DivX Subtitle]. 4) Select a
video resolution, switch to its default mode: supported character set. 5) Press OK .
1) Press . 2) Press . 3) Press ZOOM . The contents of a USB storage device cannot be read.
• Ensure that the format of the USB storage
device is compatible with the home theater
Sound (see ‘Product specications’ on page 14).
No sound. • Ensure that the USB storage device
• Ensure that the audio cables are connected is formatted with a le system that is
and select the correct input source (for supported by the home theater (note that
example, AUDIO SOURCE ) for the device NTFS is not supported).
you want to play. ‘No entry’ or ‘x’ sign appears on the TV.
• The operation is not possible.

16 EN

More user manuals on ManualsBase.com

 10 Index P
password 13

English
picture
A options 9
amplier 14 slide show 10, 9
audio thumbnail overview 9
connection 8 troubleshooting 16
language 13, 9 play
settings 12 disc 9
synchronize with video 10 options 9
radio 10
troubleshooting 16
C USB storage device 10
care 4 product care 4
change settings 12 product specications 14
connect
audio from TV 8 , 11
guide 7 R
other devices 8 radio
TV 7 play 10
connectors 7 program 10
contact us 16 tune 10
recycle 4
region code 14
D remote control 5
disc repeat 9
play 9 rotate pictures 9
supported discs 14
disposal of your product 4
DivX S
subtitle 13 safety 3
settings
audio 12
F general 12
le formats 14 parental control 13
preferences 13
restore factory settings 13
L video 13
language slideshow
audio 13 play musical slideshow 10
disc menu 13 software
on-screen display 12 update 14
subtitle 13 version 14
sound
mode 8
M surround 9
MP3 troubleshooting 16
create MP3 les 11 subtitle
language 9

O
overview
connectors 7
main unit 5
remote control 5
EN 17

More user manuals on ManualsBase.com

T
time search video 10
troubleshooting 16
TV
audio from TV 8 , 11
connect 7

U
USB
play 10
software update 14

V
video
options 9
settings 13
synchronize with audio 10

18 EN