Scribd Logo
Upload

Welcome to Scribd!

  • 30 views

    Benchtop Systems: MC2000 N (150x100)

    Uploaded by

    juk expert
    The MC2000 N (150x100) benchtop marking system has a marking area of 150x100mm and includes a work table and plate locator. It offers high speed and accuracy marking on materials up to 62 HRC hardness using various pneumatic or electric marking heads. The system connects to the T2 controller which allows for vector-based marking of various characters, logos, and codes without resolution loss.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Benchtop Systems: MC2000 N (150x100)

    Uploaded by

    juk expert
    30 views2 pages
    The MC2000 N (150x100) benchtop marking system has a marking area of 150x100mm and includes a work table and plate locator. It offers high speed and accuracy marking on materials up to 62 HRC hardness using various pneumatic or electric marking heads. The system connects to the T2 controller which allows for vector-based marking of various characters, logos, and codes without resolution loss.

    Original Title

    150x100N-en

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The MC2000 N (150x100) benchtop marking system has a marking area of 150x100mm and includes a work table and plate locator. It offers high speed and accuracy marking on materials up to 62 HRC hardness using various pneumatic or electric marking heads. The system connects to the T2 controller which allows for vector-based marking of various characters, logos, and codes without resolution loss.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    30 views2 pages

    Benchtop Systems: MC2000 N (150x100)

    Uploaded by

    juk expert
    The MC2000 N (150x100) benchtop marking system has a marking area of 150x100mm and includes a work table and plate locator. It offers high speed and accuracy marking on materials up to 62 HRC hardness using various pneumatic or electric marking heads. The system connects to the T2 controller which allows for vector-based marking of various characters, logos, and codes without resolution loss.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    BENCHTOP

    SYSTEMS

    MC2000 N (150x100)

    Benchtop model with column support and


    marking table, specially designed for marking
    large areas.

    Great accuracy and high marking speed on


    all kinds of materials up to 62 HRC hardness.

    Reliable, strong and low-maintenance


    machine.

    Technical Features
    • Marking area 150x100mm. With work table and plate locator.
    • High speed and accuracy selection (belts or screws option).
    • Choice of marking heads: N7, N10, N14 or N20 (pneumatic
    drive) and S6 (electric drive) depending on marking
    requirements.
    • Robotics cable length: 2 metres (custom length possible).
    • Air pressure: 6 bars.
    • Connection to T2 controller (see controller specifications).
    • Wide range of characters from 1 to 48 mm. Anagrams,
    logos, DataMatrix codes, etc.
    • PC-based editing software.
    MC 2000T²
    CONTROLLER
    MC 2000T² is the latest generation electronic
    controller for all MC2000 marking machines. The
    MC 2000T² controller embodies the best features
    of all previous COUTH control units and incorporates
    cutting-edge technology improvements. That makes
    it the most powerful and flexible tool of its kind in
    the market.

    Its new vectorial-definition based marking system


    makes it possible to mark any kind and size of
    character and logo without losing resolution.

    Technical Features
    • Stand-alone unit. No PC required for its operation. • RS232 series interface, adaptable to RS485, Ethernet,
    • Controller suitable for any COUTH marking system. Profibus...
    • Pneumatic or electromagnetic drive according to • 11 input signals and 7 output signals, all programmable
    mechanics. for connection to PLC.
    • Graphic menus for easier use. • Socket for external keyboard connection.
    • Multi-language menus. • Socket for barcode or DataMatrix code reader connection.
    • Vectorial marking without losing resolution whatever the • Connector for plate feeder, rotating devices, jogging
    size. systems...
    • Straight, oblique, arc and symmetrical marking capabilities. • 40-line files (75 characters/line)
    • Marking of serial numbers, prior setting of range and • Storage of up to 500 files
    recurrence, shifts, time, date, week... • PC-compatible SD Card for storage and transfer of
    • Marking of logos and special characters. settings, files, logos...
    • Marking of 2D DataMatrix coding. • RoHS standard compliant SMD technology. - Complies
    • Choice of fonts. Possibility of creating customised fonts. with CE mark European Directive.
    • Adjustable character compression, expansion, spacing, • Power supply: 110/220V, 50/60Hz.
    italic writing and dot density. • 120mmx90mm, 320x240 pixel grey scale display.
    • Adjustable speed and impacting force. • Dimensions (width x height x depth -mm-) 280x160x261.
    • Plug-in or built-in Start/Stop push-button box. • Weight: 5.450kg
    • Slave mode of operation with PC or PLC.

    Carabel Txiki s/n - Apdo. 30, 20120 HERNANI - SPAIN


    Tfno.: +34 943 556 412 Fax: +34 943 555 262
    E-mail: [email protected]
    www.couth.com ISO 9001:2008

    You might also like