Krusik - Catalog

HOLDING CORPORATION
www.krusik.rs
CATALOGUE
2016.
HOLDING CORPORATION
BACKGROUND
Formation of the present Company Krušik is

connected to the year 1937, when the adventurous
engineer Nikola Stankovic decided to build a
factory of armament and ammunition in Valjevo,
similar to the one that had already existed in
Višegrad. The factory got its first name after the
parent factory from Višegrad.
Based on the Decision of the Sarajevo Royal Bank, on February 22nd, 1939, the Trade Sector of the
Ministry of Trade and Industry issued the permit (Conf. III No. 17) stating that the Company
“Vistad” in Valjevo may engage in industrial production of primers. Very soon, the factory took over
the monopoly of No. 8 primers production. Shortly after, the Company „Vistad” started the
production of hand offensive grenades, infantry rifle ammunition and also the preparation of
manufacture of small caliber (12kg) aircraft bombs began. During the Second World War, the
Company „Vistad” practically had a decisive role in the supply of war-material products to the battle
front.
By transition into the jurisdiction of the Ministry of National Defense on June 10th, 1945, the
factory got the name Military-Technical Institute of Valjevo and on January 23rd, 1948, the
Company was registered under the name of „Krušik”. 75 years of existence are characterized by
alternating periods of growth and stagnation in business activities and company development.
Having in mind the above said, the last decades of Krušik existence may be divided provisionally in
four crucial periods:
THE FIRST PERIOD, between 1948 and 1970, is significant for the development of inherited
products, but also for the introduction of new programs into the war-material items production.
Reorientation of free capacities in military production to the production of civil programs was seen
as an especially important activity at this period of time.
THE SECOND PERIOD, between 1975 and 1985, belongs to a decade of investments,
development and business expansion of the Company. This period is called the Golden Age of
Krušik.
A remarkable 80 million dollar export on annual basis has been achieved, thus enabling intensive
modernization of the production programs and service capacities. In this period, Krušik was one of
the biggest economic companies in Yugoslavia, with ten thousand employees and the products
mostly designated for foreign markets.
Defense production, with its rocket program technologies of high quality, occupies a particular
place in the entire system of Krušik, constituting the very backbone of the development function of
the Company and export results.
2
HOLDING CORPORATION
THE THIRD PERIOD in Krušik history started in 1985, along with the occurrence of rapid
recession of business dealings, being the result of global changes as well as the collapse of
Yugoslavia, and followed by the introduction of sanctions against our country, wars in the region
and NATO bombings. Due to interrupted business connections with the world and sudden loss of
projects, all the companies within the system found themselves in a difficult position, especially the
Defense production. Consequently, all the energy was put into the pursuit of a new organizing
system and in 1992 the Company Krušik has been organized as a holding corporation. In the
Defense production the focus was on an intensive work on restructuring the part of its capacities
aiming at the production of profitable programs for new markets. Accordingly, development and
production of anti-hail rockets, electric detonators, cam switches, gas meters and other products was
initiated.
Krušik succeeded in implementing the Government’s Social Program and the number of employees
had been adjusted to the current level of production.
3
HOLDING CORPORATION
THE FOURTH PERIOD, ongoing to the day, is the period of widening product assortments by way
of introducing new ones into the production, modernizing the existing products in accordance with
the market requirements, increasing the number of customers as well as production efficiency,
maintaining permanent quality which is one of the features Krušik is widely known for, continuous
improvement of personnel, equipment modernization, introduction of new technologies, hiring of
young staff, adjustment of production processes and products to environmental requirements,
permanent investment in process automation and electronic monitoring.
Holding Corporation Krušik a.d., with its vastly experienced workforce and the name ever-present
on the world market, permanently connected with quality, imposed itself as a reliable partner, open
for all kinds of cooperation, both in the field of production and development.
4
HOLDING CORPORATION
COMPANY PROFILE
Company Name: HK „Krušik“ a.d.
Established: February 22nd, 1939
Number of Employees: 2261
Type of Company:
Closed joint-stock company
Address: 59 Vladike Nikolaja,
14000 Valjevo, Serbia
General Manager: Mladen Petković
Phone: +381 14 221 593
Fax: +381 14 220 516
E-mail: [email protected]
Web site: www.krusik.rs
Military program
- Mortar Shells of all calibers (high explosive, smoke and illuminating), guided and unguided
rockets (high explosive and antitank), aircraft bombs, artillery projectiles, 40mm ammunition,
82mm cartridges, cumulative mines, hand grenades, antitank mines, fuzes and initial devices.
- Overhaul of the ammunition for all production program items
- Control-technical inspection and survey for the purpose of the rocket systems shelf life extension
- Transfer of technologies and construction of factories for all types of proper production programs
Civil program
- Krušik’s antihail system, electric detonators, containers for explosive disposal, cam switches,
gun and primers for cattle stunning, technical parts made of Al and Cu alloys, technical parts
made of thermosetting resins, tools manufacture, metrological laboratory services, metal
processing, thermal treatment and chemical protection.
The Holding Corporation “Krušik“ a.d. is the name recognized worldwide among the users of
products that the Company “Krušik“ produces. Owing to the seventy-five years of tradition and
over ten million of sold items in more than 60 countries in the world, the Company „Krušik“ is
ranked among the leading armament manufacturers in this part of Europe.
“Krušik” has the integrated quality management system certified as per:

ISO 9001:2008; ISO 14001:2004; OHSAS 18001:2007 and SRPS ISO 17025:2005.
Strategic goals of the Company “Krušik“ are as follows: widening the products range by way of
introducing new ones into the production, modernization of the existing products in accordance
with the market requirements, increasing the number of customers, boosting production efficiency;
maintaining high quality which is one of the features we are internationally known for, continuous
training of personnel, equipment modernization, introducing new technologies, hiring young
employees, adjustment of manufacturing processes and products with the environmental protection
requirements, continual investment in process automation and electronic surveillance.
The Holding Corporation “Krušik“ a.d. is one of the companies with the longest tradition of
participating in national and international fairs. The beginning of the factory presentation at fairs
coincided with the beginning of the first Technology Fair in 1956 in Belgrade. In the course of all
these years, “Krušik“ has participated in more than 300 manifestations both in the country and
5
HOLDING CORPORATION
abroad. Many partnerships with great number of domestic and foreign companies have been
established. Partners of strategic importance for the Company „Krušik“ are the Company
Yugoimport SDPR and the Serbian Army.
„Krušik“ establishes with potential partners worldwide different forms of cooperation of mutual
interest, including the following:
- delivery of completed items or item parts from its own production program;
- joint participation in the sale of products on new markets;
- independent or mutual development of products at market requests;
- manufacturing technologies transfer, by sale or exchange;
- improvement of existing items in order to enhance the characteristics as per customer’s requests.
Support which factory receives from the Serbian Government is very important for its
development and business activities.
6
HOLDING CORPORATION
FIELD OF ACTIVITY
PRODUCTION OF ARMAMENT AND MILITARY EQUIPMENT

We produce armament and military equipment for Military Aviation and Air Defence, Ground
troops, Navy and other, as well as practice devices.
OVERHAUL OF ARMAMENT AND MILITARY EQUIPMENT
We perform overhaul of armament from our production program or overhaul of similar
devices from other producers.
ENGINEERING BUSINESSES
Technology transfers and erection of plants and production facilities with diverse production
programs.
MARKET ORIENTED PROGRAMS

We produce products that can be applied in different branches of industry.
SERVICES
We perform the following services: metal manufacturing, heat treatment and protective
coatings.
We perform the assembling and safe destruction of war devices that went out of use and
the usage period of which shelf life has expired.
7
HOLDING CORPORATION
MILITARY PROGRAM
HK „KRUŠIK” a.d. , 14000 VALJEVO, REPUBLIC of SERBIA

Phone 381-14-223-121, 221-121, Marketing 381-14-226-822, Telefax 381-14-220-149
e-mail: [email protected], web site: www.krusik.rs
HOLDING CORPORATION
60 mm MORTAR AMMUNITION FAMILY

Modern solutions have been applied in developing II generation of shells. These include:
- optimised aero-dynamic shape securing improved external ballistic characteristics, accuracy and
precision at all ranges;
- advanced shell body production technology which provides forming of great number of fragments,
has been applied in production of the shell body; this technology, together with the TNT/RDX
explosive charge provides optimal efficiency at target.
Masking of friendly troops movement as well as blinding of enemy observers, fire support artillery and
anti-tank weapon crews is achieved by use of modern, low-drag and highly efficient white phosphorus-
based smoke shells.
With use of illuminating mortar shells, mortars provide night battlefield illumination, as well as blinding of
enemy crews and observers.
The shells are completed with fuzes which are also indigenously produced: point detonation, superquick/delay
fuzes, time pyrotechnical fuzes.
The propellant charge consists of base and increment propellant charge. The base propellant charge is filled
with EI powder fitted into aluminium bushing. The increment propellant charge is also filled with EI powder
fitted in reinforced celluloid shells resulting in good distribution of the projectile initial velocities and good
range overlapping.
9
HOLDING CORPORATION
MORTAR AMMUNITION FAMILY
60
mm
HE M73P4 HE Mk10 HE Mk10P1 Smoke Smoke ILL. M67P2 ILL. M91 Practice
Shell
M73P2 Mk10 M62
designation/type
Length of shell
with fuze 286 410 410 286 410 330 495 202/193
(mm)
Weight of shell
with fuze 1.08/
1.35 2.1 2.1 1.35 2.1 1.27 2.1
(kg) 0.235
Type of shell TNT RDX/TNT RDX/TNT WP WP ILL. ILL.

charge or TNT or TNT
0.3
Shell charge
weight 0.22 0.4 0.4 0.19 0.3 0.2 (illuminating
(kg) candle)
Fuze
type/designation
UTM93
UTM68P1 UTM88P1 UTM68P1 UTM88P1 TPM67 TPM67
SQ/D
Muzzle safety
(m)
8 70 50 8 70
Proppellant
charge O+4 O+6 O+6 O+4 O+6 O+4 O+6
Max. Working
pressure
(bar) 414 647 647 414 647 414 647
Maximum range 2550 5100 5100 2550 5100 2450 4000

(m) Mortar M57 Mortar M90 Mortar M90 Mortar M57 Mortar M90 Mortar M57 Mortar M90
Barrel lengthBarrel lengthBarrel lengthBarrel length 2700 Barrel length 2500 280
720 mm 1300 mm 1300 mm 720 mm Mortar M57 720 mm Mortar M57
Minimum range
(m) 94 90 90 94 90 400 (O+1) 400 (O+1) 50
10 m 14 m 14 m 180.000 Cd 350.000 Cd
(effective (effective (effective for 35s for 30s
candle speedcandle speed
Efficiency on lethal radius-lethal radius-lethal radius- ofdescent of descent
target 1 penetration1 penetration 1 penetration 2.5 m/s 3.0 m/s
2 2 2
/m ) /m ) /m )
10
HOLDING CORPORATION
81/82 mm MORTAR AMMUNITION FAMILY

Modern solutions have been applied in developing II generation og shells. These include: optimised aero-dynamic
shape securing external ballistic characteristics, accuracy and precision at all ranges; appliance of advanced
shell body manufacturing technology which provides forming of great number of fragments, has been applied
in production of the shell body; this technology together with the TNT/RDX explosive charge provides optimum
efficiency at target. The new generation shell weight corresponds to the heavy shell weights of the previous
generation and importantly increased their range, precision and terminal efficiency.
Masking of friendly troops movement as well as blinding of enemy observers, fire support artillery and anti-tank
weapon crews is achieved by use of modern, low-drag and highly efficient white phosphorus-based smoke shells.
With use of illuminating mortar shells, mortars provide night battlefield illumination, as well as blinding of enemy
crews and observers.
Antisabotage under water-operating HE mortar shells developed in 81/82 caliber, with special point-detonating,
superquick and delay-action fuses significantly expand the tactical use of mortars – providing antisabotage
underwater operation though the shock wave action against saboteurs-diving commandoes, clearing of
underwater mine fields-with the purpose of initiating a particular type of mine sensor in underwater mine-field
through the action of shock-wave, as well as antilanding operation-by fragmentation effect on the water-sea
surface or land, with the purpose of annihilating personnel and unarmoured vehicles and equipment.
The antisabotage mortar shells characterize fuze delay time from 0,09 to 0,19 s, depth of underwater burst from
4 to 10 m and shock wave intensity in the water of 1,7 MPa at the distance of burst site of 20 m and 1 MPa at the
distance of burst site of 30 m.
The propellant charge consists of base and increment propellant charge. The base propellant charge is filled with
EI powder fitted into a aluminium bushing. The increment propellant charge is also filled with EI powder fitted
in reinforced celluloid shells resulting in good distribution of the projectile initial velocities and good range
overlapping.
11
MORTAR AMMUNITION FAMILY HOLDING CORPORATION
81/82
mm
Shell HE HE HE Smoke Smoke ILL. ILL. Practice Practice Antisabo-

designation/type M72/M74 Mk11 Mk11P1 M72/M74 Mk11 M67P2 M95 M68** tage shell
M62*
M89
Lenght of shell
with fuze 375 480 480 375 480 410 530 380 287/193 480
(mm)
Weight of shell
with fuze 2.48/
3.05 4.1 4.3 3.05 4.1 2.95 4.1 2.3 4.1
(kg) 0.23
Type of shell TNT RDX/TNT RDX/TNT WP WP ILL. ILL. Target- RDX/TNT

charge or TNT parashuter
Shell charge
weight 0.68 0.85 0.75 0.55 0.63 0.4 0.65 0.85
(kg)
UTUM93P2
SQ/D
Fuze UTUM93 with delay
type/designation UTM68P1 UTM88P1 SQ/D UTM68P1 UT M88P1 TPM67 TPM67
time
0.09-0.19s
Muzzle safety
(m)
8 70 50 8 70 50
Proppellant
charge O+6 O+6 O+6 O+6 O+6 O+4 O+6 O+1 O+6
Max. Working
pressure
(bar) 647 647 647 647 647 422 647 647
Maximum range 5070 6500 6500 5070 6500 3400 5000 6500
Mortar Mortar Mortar Mortar Mortar Mortar Mortar Mortar
(m) M69 B-D M69 B-D M69 B-D M69 B-D M69 B-D M69 B-D M69 B-D M69 B-D
600 280
Barrel Barrel Barrel Barrel Barrel Barrel Barrel Barrel
length length length length length length length length
1450 mm 1450 mm 1450 mm 1450 mm 1450 mm 1450 mm 1450 mm 1450 mm
Minimum range
(m) 91 100 100 91 100 250 300 90 50 100
(O + 1) (O + 1)
500.000 Cd750.000 Cd 18m Shock-

14 m 18 m 18 m wave
(effective (effective (effective for 40s za 40s pri overpressrre
Efficiency on lethal lethal candle brzini in the water
target lethal speed of propadanja 20m 1.7MPa
radius- 1 radius- 1 radius- 1 descent osv. baklje 30m 1MPa
penetrationpenetration
penetration 2
/m )
2
/m ) 2.5 m/s 3.0 m/s
/m2)
* The practice shell contains small projectile
** Target-parachuter, 350mm x 850mm, height of target 600m, target descent velocity 5-7m 12
HOLDING CORPORATION
120 mm MORTAR AMMUNITION FAMILY

Modern solutions have been applied in developing II generation of shells. These include: optimised aero-
dynamic
shape securing external ballistic characteristics, accuracy and precision at all ranges; appliance of advanced
shell body casting technology which provides forming of great number of fragments, has been applied in
production of the shell body; this technology together with the TNT/RDX explosive charge provides optimum
efficiency at target. The new generation shell weight corresponds to the heavy shell weights of the previous
generation and importantly increased their range, precision and terminal efficiency.
Masking of movements of friendly troops, as well as blindining of enemy observers and fire support and
anti-tank weapon crews is achieved by use of modern, low-drag and highly efficient white phosphorus and
HC based smoke shells.
With use of illuminating mortar shells, mortars provide night battlefield illumination, as well as blinding of
enemy crews and observers.
The propellant charge consists of base and increment propellant charge. The base propellant charge is filled
with EI powder fitted into aluminium bushing. The increment propellant charge is also filled with EI powder
fitted in reinforced celluloid shells resulting in good distribution of the projectile initial velocities and good
range overlapping.
13
HOLDING CORPORATION
MORTAR AMMUNITION FAMILY
120
mm
Shell HE Smoke High smoke

designation/type M62P HE Mk12P1 HE Mk12P1-L M64P2 M89 ILL. M87P1 ILL. M91
Length of shell
with fuze 606 800 800 606 670 670 752
(mm)
Weight of shell
with fuze 12.6 14.8 14.8 12.6 11.25 10.7 11.5
(kg)
Type of shell RDX/TNT RDX/TNT RDX/TNT WP HC in ejected

charge or TNT or TNT or TNT pot ILL. ILL.
Shell charge
weight 2.5 2.9 2.9 2.45 1.65 1.2 1.2
(kg)
TPM87 Time, TPM87 Time, TPM87 Time,
pyrotechnical, pyrotechnical, pyrotechnical,
circonium- circonium- circonium-
Fuze based fuze, based fuze, based fuze,
type/designation UTU M93-N UTU M93-N UTU M93-N UTM68P1
time setting time setting time setting
from from from
5 to 50 sec. 5 to 50 sec. 5 to 50 sec.
Muzzle safety
(m) 50 50 50 8
Proppellant
charge O+6 O+8 O + 10 O+6 O+5 O+5 O+5
Max. Working
pressure 922 922 1250 922 620 620 980
(bar)
6500 7400 9400 6500 6000 6000 6600

Maximum range Mortar M75 Mortar M75 Mortar M95 Mortar M75 Mortar M75 Mortar M75 Mortar M75
(m) Barrel length Barrel length Barrel length Barrel length Barrel length Barrel length Barrel length
1500 mm 1500 mm 1900 mm 1500 mm 1500 mm 1500 mm 1500 mm
Minimum range
(m) 255 255 275 255 400 (O + 1) 400 (O+1) 400 (O+1)
20 m 24 m 24 m On hitting the 1.000.000 Cd 1.000.000 Cd

(effective (effective (effective ground, the for 60s for 60s
Efficiency on letehal letehal letehal smoke pot candle speed candle speed
target radius- 1 radius- 1 radius- 1 emits a thick of descent of descent
penetration penetration penetration white smoke 3 m/s 3 m/s
/m2) /m2) /m2) for the time
of 4-6 minutes
14
HOLDING CORPORATION
BR-1-57 mm Air-to-surface rocket launcher
Aircraft Rocket BR-1-57
BR -1- 57 rocket projectile is the Rocket of high

explosive effect, 57 mm caliber and assembled with
impact fuze, type UTI-1. Purpose of this rocket is
destruction of air targets at the altitudes up to 30.000 m it
is the modern aircraft amament.
BR-1-57 rocket with the UTI-1 fuze can also be used for
the ground targets destruction ( aircraft, cars,
warehouses and similar military objects).
BR -1 -57 rocket with the fuze UTI-1 is fired from the
tube launchers (with rear part opened) , which are placed
in the honeycomb launchers L-57.
Tehnical data
Caliber: 57mm
Length of the rocket with the fuze: 882mm
Mass of the assembled rocket: 3.86 ± 0.06 kg
Mass of the explosive charge: 0.285 kg
Ballistic characteristics
Maximum speed: 673 to 617 rn/s
Flying time for the distance of 1000 m: 1.89 to 2.19s
Maximum allowed pressure in the rocket chamber: 380kg/cm2
BR-1-57 BR-1-57 P1
INITIATION BY MEANS INITIATION BY MEANS OF AUTOMATIC

OF PLUG SWITCHING ON THE CIRCUIT
15
HOLDING CORPORATION
Aircraft Rocket BR-2-57
Rocket BR-2-57 is of the hollow charge effect. It is 57

mm caliber assembled with the impact inertial UTI-2 fuze.
The rocket is used to destroy armoured ground
targets,
tanks, self-propelled artillery, armoured vehicles,
armoured personnel carriers etc. It serves as the rocket
armament of modern jet airplanes.
Rocket BR-2-57 is launched with the UTI-2 fuze from
the launcher tube ( with the opened rear ends )
which is assembled in honeycomb rocket package.
Tehnical data
Caliber: 57 mm
Length of the rocket with the fuze: 824 to 835 mm
Mass of completely assembled rocket: 3.64 kg
Mass of the explosive charge: 0.29 kg
Thickness of the pierced armour when the rocket strikes
at the angle of 300° from the vertical: 100 to 150 mm
Rocket firing: Electric, with two electric igniters
Ballistic characteristics
Maximum velocity: 563 to 620 rn/s
Time of rocket flight up to the distance of 1000 m: 2.461
to 2.179 s
Maximum allowable pressure in the (rocket) combustion
chamber: 375 kg/cm2
BR-1-57 BR-1-57 P1

16
HOLDING CORPORATION
Aircraft Rocket cal.57 mm BR-20-57 P1

General
In addition to the aircraft rockets BR-1-57 mm and

BR-2-57 mm manufactured to date, “Krusik” has
developed the production of a new service rocket, named
the Universal BR-20-57 P1, and corresponding practice
rocket.
BR-20-57 P1 nun rocket is a rocket of a combined hol
low-charge and fragmentation effect, so that it
incorporates the application of the rocket BR-1-57 mm,
which means that a single rocket type can be
employed in different fighting missions. The arming so far
has to be performed with a specific type of rockets
(either hollow -charge or high -explosive), depending on
a particular combat action, which
Is now no longer necessary , owing to the new
universal-employment rocket . This practically provides
multiple employment advantages.
Technical characteristics
The aircraft rocket of a hollow -charge and

fragmentation effect BR-20-57 P1 is a system of Cal.57
mm unguided air-to-ground and air- to-air rockets and is
used for mass arming of aircrafts . The rocket includes
a warhead with hollow charge and fragmentation effect
and impact type UTI-2 fuze and superquick - inertial
action . The rockets are used to annihilate air targets
at altitudes of up to 30.000 m , for assault actions
against mobile and stationary armoured targets such
as tanks , armoured vehicles , carriers , light weapon
and vehicles , aircrafts on the ground and personnel
around the stated combat means.
Tehnical data
Rocket mass: 4.5 kg

Explosive charge mass: 0.32 kg
Propellant mass: 1.13 kg
Penetration: 160-200 m
Quantity of fragments on burst: 200 pcs
Killing range: 18-20 m (40 m circle)
Muzzle safety: 110
Packing of 8 rockets per wooden case
Special air-tight packaging for the fuze
Warranty period: 5 years
17
HOLDING CORPORATION
BR-1-57 V, BR-2-57 V and BR-20-57 V

Practice Rockets
The Practice rockets BR-1-57 V, BR-2-57 V and

BR-20-57 V are used for training of pilots when
firing 57 mm caliber rockets.
The warhead and the fuze are inert (made of metal).
Its mass, centre of gravity and shape are matched
to live rockets, so that its ballistic trajectories are
identical to those of the service rockets.
Packing of 12 rockets per wooden case with the
total mass of packing amounting to 67 kg.
Warranty period is 5 years.
BR-1-57 BR-1-57 P1

18
HOLDING CORPORATION
PROGRAMMABLE GUIDED ROCKET - 200 (PRM-200)

PRM-200 is a programmable
guided rocket with self-contained
guidance system, used as a
target for:
-Live firing by medium - range AD
missiles with radar or lR
guidance;
-Live firing by air-to-air missiles
with radar or IR homing systems;
-Live firing by light AA artillery
systems equipped with radar
FCS.
PRM-200 is fitted with two optical and two IR or smoke flares for increase of IR
contrast. The flares are adjustable to ignite from 10 to 80 seconds upon launching
and then burn for 35 seconds.
PRM-200 radar signature is provided by Luneberg Iens (passive radar reflector)
built in the forward and aft sections of the rocket target.
PRM-200 can be launched from the advanced trainer/combat G-4 “Super Galeb” or
similar aircraft provided with additional relevant equipment and target carrying and
launching kit.
PRM-200 is launched-and-forgotten by the pilot at aircraft speeds of Mach 0.5 to 0.8.
If the target is not hit , the programmer unit activates the target self-destructing
device.
The guidance system is self-contained , programmable and comprises a barometric
altimeter and two free gyroscopes. Its guidance is programmed before fixing PRM-
200 on the launcher along the aircraft platform.
Performances:
Operating altitude range 300(±10%) to 7.000 m(±10%)
Preprogrammed number of pitchings 2
Preprogrammed number of yawings 2
Yaw angle ± 30° (± 30)
Pitch angle ± 27° (± 30)
Target range:
-launched at the altitude of 300 m 22km (± 0.5 km)
-launched at the altitude of 7.000 m 48 km (± 2km)
Contrast characteristics:
Target radar head-on signature:
For X range (l= 3cm) 6.53 m2
For G range (l= 5cm) 2.35 m2
For S range (l= 10cm) 0.58m2
IR radiation level mm. 2 x 2.000 Cd
19
HOLDING CORPORATION
QUICK ATS 128 mm
Quick air target simulator is non-quided rocket-target.

Operators of army air defense systems use it for practicing
the use of short range air defense rocket system.
Shooting practicing is done with incoming (type A) and
departing (type B) unguided rocket on ballistic trajectory.
20
HOLDING CORPORATION
TYPE - A TYPE - B
Technical data:
-Caliber ---------------------------------------------------------------- 128 mm
-Stabilizer range ----------------------------------------------------- 270 mm
-Length of rocket with tracer -------------------------------------- 1256 mm
-Rocket mass, type - A --------------------------------------------- 33,6 kg
-Rocket mass, type - B --------------------------------------------- 35 kg
-Mass of ingnition charge ------------------------------------------ 9,7 kg
-El. resistance of the ingnition circuit --------------------------- 1,25 W do 2,25 W
-No. of tracers :
type "A" -------------------------------------------------------------- 6 pcs.
type "B" -------------------------------------------------------------- 4 pcs.
-No. of modified IC-5 decoys ------------------------------------- 4 pcs.
-Temperature range ------------------------------------------------- -30° do +50°C
21
HOLDING CORPORATION
FAB-100 M80 HE FREE-FALL BOMB
FAB-100 M80 HE bomb is intended for attack against targets of low and
medium fortification level, such as: industrial facilities, railroad junctions,
roads, storehouses manpower, army assets and the like.
It is suitable for all current and projected aircrafts capable to carry bombs
of such weight and where bomb racks with free-fall weapon release units
having 250mm or 355.6mm (standard NATO 14-inch) hook spacing.
The bomb may be released safe or armed at speeds up to 1000 km/h.
22
HOLDING CORPORATION
FAB-100 M80
Characteristics
Bomb type.........................................................FAB-100 M80
Diameter......................................................................230mm
Length......................................................................1490 mm
Hook spacing
(adaptable to A/C bomb rack)..................250 and 355.6 mm
Weights
-Without fuses.............................................................117 kg
-Main explosive charge (TNT).......................................39 kg
Fuses
-Type AUV-E....................................................................1 off
-Type AUFK.....................................................................1 off
Packing:
-Bomb (3 off).......................................................In one crate
-Fins (12 off)........................................................In one crate
23
HOLDING CORPORATION
FAB-100 M80 HE Retarded Bomb with

UKB-100 M80 Retarder System
FAB-100 M80 HE bomb is designed for safe and effective bombing in the
low-level strike role. It is suitable for all current and projected aircraft capable
to carry bombs of such weight and where bomb racks with free-fall weapon
release units having 250 mm or 355.6 mm (standard NATO 14-inch) hook
spacing.
The bomb may be released safe or armed with speeds from 700 to 900 km/h
and altitudes over 55 m.
The bomb is intended for attack against defended target areas of low and
medium fortification level, such as: industrial facilities, railroad junctions, roads,
storehouses, manpower, army assets and the like.
Bomb retardation reduces high risk of fragment damage to the aircraft by

ensuring a safe separation distance of 500 m approximately between aircraft
and bomb detonation site.
24
HOLDING CORPORATION
FAB-100 M80 HE Retarded Bomb

with UKB-100 M80 Retarder System
Characteristics
Bomb type..........................FAB-100 M80 with UKB-100 M80
Diameter......................................................................230mm
Weight of bomb without fuse.......................................128 kg
Length.(without fuse) ..............................................1617 mm
Hook spacing
Weights
-With UKB-100 and fuses............................................132 kg
-With UKB-100 without fuses.......................................128 kg
-Main explosive charge (TNT).......................................39 kg
Fuse
-Type AUFK.....................................................................2 off
Packing:
-Bomb (3 off).......................................................In one crate
-UKB-100 (2 off)......................................In one wooden box
25
HOLDING CORPORATION
FAB-250 M79 HE Free-Fall Bomb
FAB-250 M79 HE bomb is intended for attack against targets

of medium fortification level, such us: industrial facilities,
railroad junctions, roads, storehouses, command posts, air
base installations, bridges, army assets, naval vessels and the like.
It is suitable for all current and projected aircraft capable to carry

bombs of such weight and where bomb racks with free-fall weapon
release units having 250mm or 355.6mm (standard NATO 14-inch)
hook spacing.
The bomb may be released safe or armed at speeds up to 1000 km/h
26
HOLDING CORPORATION
FAB -250 M79

Characteristics
Bomb type.........................................................FAB-250 M79
Diameter.....................................................................325 mm
Length.....................................................................2015 mm
Hook spacing
Weights
-Without fuses.............................................................240 kg
-Main explosive charge (TNT).....................................105 kg
Fuses
-Type AUV-E....................................................................1 off
-Type AUFK.....................................................................1 off
Packing:
-Bomb ................................................Inside protective rings
27
HOLDING CORPORATION
FAB-250 M79 HE Retarded Bomb with

UKB-250 M80 Retarder System
FAB-250 M79 HE bomb is designed for safe and effective bombing in the
low-level strike role. It is sultable for all currentvand projected aircraft capable
to carry bombs of such weight and where bomb racks with free-fall weapon
release units having 250 mm or 355,6 mm (standard NATO 14-inch) hook
spacing.
The bomb may be released safe or armed at speeds from 700 to 900 km/h and
altitudes over 55 m.
The bomb is intended for attack against defended target areas of medium
fortification level, such as: industrial facilities, railroad junctions, roads,
storehouses, command posts, air base installations, bridges, army assets,
naval vessels and the like.
Bomb retardation reduces high risk of fragment damage to the aircraft by

ensuring safe separation distance of 500 m approximately betwen aircraft
and bomb detonation site.
28
HOLDING CORPORATION
FAB-250 M79 HE Retarded Bomb

with UKB-250 M80 Retarder System
Characteristics
29
HOLDING CORPORATION
RAB-250 M91 Air Bomb
FUZE UPB M91
This Air Bomb is intended for annihilation and disabling of live force
and technical devices such as: light armor combat and non-combat
vehicles, artillery, rocket, radar devices and installations, landed
aircraft etc.
Air Bomb can have free or impulse release from aircraft equipped
with bomb carriers of required carrying capacity and with 250mm or
355.6mm (standard NATO 14-inch) distance of "bomb locks" for
hanging.
TECHNICAL DATA
- Mass of Air Bomb .................................................................. 252 kg
- Mass of bomb body .............................................................. 231 kg
- Tail Unit mass ....................................................................... 14,5 kg
- Type of explosive charge .......................................................... TNT
- Mass of the explosive charge ................................................. 70 kg
- Number of steel balls Ø12 mm ............................................. 15000
- Diameter of the body ......................................................... 320 mm
- Length of Air Bomb .......................................................... 2085 mm
- Distance between fins in the Tail Unit ................................ 462 mm
- Distance between suspension lugs .................. 355,6 and 250 mm
- Fuze type ............................................................ UPB M91, 1 off *
* NOTE: RAB-250 Air Bomb can be completed with ditferent types of fuzes.
30
HOLDING CORPORATION
107 mm M06 artillery rocket
Unguided extended range 107 mm rocket (107 mm M06)
Unguided extended range 107 mm artillery rocket (with designation 107 mm M06)
With UTI fuse makes a part of the 107 mm sef-propelled multi-launcher rocket
system and standard 107 mm rocket launchers
Unguided extended range 107 mm rocket is designed to:
• incapacitate enemy troops and equipment‚
• incapacitate or destroy enemy forces at meeting places‚
• incapacitate or block enemy convoys‚
• prevent assaults by parachute troops and invasions from the sea
• neutralize or destroy enemy command posts and communication centers
inside range area
The rocket head has the HE warhead
Technical characteristics
• rocket caliber..................................................................................107 mm
• rocket length with UTI M84 fuse.................................................825,0 mm
• rocket weight...................................................................................17,6 kg
• UTI M84 fuse weight.......................................................................0,35 kg
• warhead explosive weight.............................................................1,250 kg
• maximum range..............................................................................11,5 km
• total motor impulse........................................................................9500 Ns
• operating temperature range..............................................-32˚C to +60˚C
• set weight (2 rockets in a wooden case.............................................49 kg
• set weight (24 rockets in a composite pod,
with 24 launching barrels in a woden case............................650 to 700 kg
• the rocket can be transported by all transportation means
Extended range 107 mm rocket consists of a rocket motor (1), warhead (2) and fuse (3).
Main parts of extended range 107 mm rockets
31
HOLDING CORPORATION
Rocket motor consists of:

• rocket motor chamber (1),
• nozzle assembly (2),
• rocket propellant (3)
• front base with ignition subassembly (4). Main parts of 107 mm rocket motor
Rocket propellant is the modern thermoplastic composite

propellant made according to the original technology.
Warhead consists of steel implant (1), shell body (2) explosive

charge (3).Detonation cups (4) are mounted behind the fuse (5).
Shell body (2) is ogivally shaped. It is forged and made of steel.

Thickness is not uniformed across the body and that allows
maximum fragmentary efficiency against the target.
Packing of extended range 107 mm rocket

(107mm M06) with fuse UTI M84
2 rounds in a wooden case
W/C dimension: 1081 x 360 x203 (kg)
Case gross mass with two rounds: 49 kg
Package-Bottom and corners are hardened
In order to prove the

quality of our rockets and
accentuation of their
advantages we are ready to
perform flight tests on your
or our flight-test facilities
32
HOLDING CORPORATION
SELF-PROPELLED MULTI-TUBE MISSILE LAUNCHER 122 mm – “GRAD”

“GRAD” is self-propelled multi-tube missile launcher intended for impact, sudden and
quick fire assaults on the surface targets in the depth of the enemy. It is efficient against
all types of targets: personnel, non-armoured and armoured vehicles.
System “GRAD” fires three types of missiles: GRAD, GRAD M and GRAD 2000.
The launcher is carried on the vehicle TAM 150 T11 BV 6x6.
It is possible to mount it on other vehicles of the similar characteristics
(for example FAP 1417).
Rocket GRAD cal. 122 mm
PERFORMANCE MAJOR PARTS

Caliber ........................................ 122 mm 1. Aerodynamic ring for drag increasing
Length ...................................... 2875 mm 2. Warhead
Total mass ...................................... 66 kg 3. Fuse
Warhead mass with fuse ............. 19,1 kg 4. Nozzle assembly with fins and contact
Propellant mass ........................ 20,45 kg cover
Motor total impulse .................. 39700 Ns 5. Rocket driver
Motor specific impulse ............... 1940 Ns 6. Twin combustion chamber and twin grain
Temperature range ........... -30° to +50°C motor
Elevation ....................................... 48.48°
Range ........................................ 20.1 km
33
HOLDING CORPORATION
GRAD M-rocket cal. 122 mm
PERFORMANCE
Caliber ........................................ 122 mm
Length ....................................... 2875 mm MAJOR PARTS
Total mass .................................... 69.3 kg 1. Aerodynamic ring for drag increasing
Warhead mass with fuse .............. 19.1 kg 2. Warhead
Propellant mass ........................... 25.6 kg 3. Fuse
Motor total impulse ................... 51400 Ns 4. Nozzle assembly with fins and contact
Motor specific impulse ................ 2010 Ns cover
Temperature range ............ -30° to +50°C 5. Rocket driver
Elevation ........................................ 48.48° 6. Single combustion chamber and single
Range ......................................... 27.8 km star shaped grain motor
GRAD 2000-rocket cal. 122 mm
PERFORMANCE
Caliber ........................................ 122 mm
Length ....................................... 2925 mm
Total mass .................................... 68.3 kg MAJOR PARTS
Warhead mass with fuse .............. 19.1 kg 1. Aerodynamic ring for drag increasing
Propellant mass ........................... 27.3 kg 2. Warhead
Motor total impulse ................... 62250 Ns 3. Fuse
Motor specific impulse ................ 2280 Ns 4. Single nozzle assembly with fins and
Temperature range ............. -30° to +50°C contact cover
Range (elevation 50° )................ 38.4 km 5. Rocket driver
* Optimal angle of elevation ............... 55° 6. Single combustion chamber and single
* Range .......................................... 40 km cylindrical grain motor
34
HOLDING CORPORATION
M63/94 SELF-PROPELLED MULTI-TUBE

MISSILE LAUNCHER 128 mm - PLAMEN C
"Plamen C” is self-propelled multi-tube missile launcher
intended for impact, sudden and quick fire assaults
against personnel and non-armoured vehicles. It
appeared as a result of merging of the launching device
and towing vehicle for the M63 LRSV 128 mm system
by adding some newly designed assemblies.
“Plamen C” fires two types of missiles: PLAMEN-A, M63
and PLAMEN-D, M87 with extended range.
The launcher is carried on the vehicle TAM 150 T11 BV
6x6.
It is possible to mount it on other vehicles of the similar
characteristics (for example FAP 1417).
The system is of a modular concept in such a way as to
permit mounting of the “OGANJ” launching device with
24 or 32 tubes on the multi-purpose upper carriage
instead of PLAMEN launching device.
The design of the launcher meets all ergonomic
requirements providing easy and safe handling.
Manual mechanism drive can be changed into semi-
automatic on user’s request.
Deployment time is 30 seconds. The time needed for
leaving of firing position is 30 seconds.
Mass distribution provides proper center of gravity
during transportation with FULL-EMPTY combination in
the way that launching device is turned for 1600 in
respect to the basic position.
Technical data of
the system "PLAMEN-A", M63 "PLAMEN-D"
Maximum range 8.600 m 12.625 m
Firing rate 5; 2.5; 1.66 missiles/s 5; 2.5; 1.66 missiles/s
Temperature range of use -30o to + 50oC -30o to + 50oC
Transportation TAM 150 T11 BV 6 x 6 TAM 150 T11 BV 6 x 6
Total mass of the system 9.600 kg 9.600 kg
Technical data of the missile
Missile diameter 128 mm 128 mm
Warhead caliber 128 mm 128 mm
Missile length 837 mm 971 mm
Missile mass 23.1 kg 25.5 kg
Mass of (warhead) exsplosive charge 2.6 kg 3.3 kg
Technical data of the launching tube
Internal diameter 128 mm 128 mm
Tube length 1030 mm 1030 mm
Mass of the tubes (with mechanism) 15 kg 15 kg
35
HOLDING CORPORATION
M77 SELF-PROPELLED MULTI-TUBE MISSILE

LAUNCHER 128mm OGANJ C
OGANJ C is self-propelled multi-tube missile launcher intended for impact, sudden and quick fire
assaults on surface targets in the depth of the enemy. It is efficient against all types of the targets:
personnel, unshielded and armored vehicles.
OGANJ C, for firing from multi-tube missile launcher, uses point-detonating-demolition missile
M77 (OGANJ M77). The launcher is loaded on the vehicle TAM 150 T11 BV 6 x 6.
It is possible to mount it on other vehicles of similar characteristics (FAP 1417, for example). The
system is modularly designed in such a way as to permit mounting of the “PLAMEN” launching
device with 32 tubes, put on the universal upper carriage. The launcher design meets all the
ergonomic requirements providing comfortable and safe work. Mechanism drive is manual. On the
user's request, it can be modified to semi-automatic operation. The launcher deployment time is 30
seconds. Time, needed for firing position leave, is 30 seconds. Masses distribution provides proper
center of gravity position during transportation with FULL -EMPTY combination while the
launching device has been turned over to the original position by 180°.
THE SYSTEM FEATURES

Maximum range 21500 m
Firing rate 2 missiles / sec
Number of tubes 24 or 32
Combat kit 64 missiles
Number of operators 2+4
System total mass 22000 kg
Temperature range of use -30° to +40° C
TECHNICAL DATA for THE ROCKET OGANJ M77

Missile diameter 128 mm
Warhead caliber 128 mm
Length 2600 mm
Missile mass 67 kg
Warhead mass 19,5 kg
Field of action by direction 180°
Field of action by elevation 0 - 50°
Radius of warhead efficient action 40 m
Surface of point detonating
demolition warhead effects 0,36 ha
Fuze UTU, M77
TECHNICAL DATA for THE LAUNCHING TUBE

Internal diameter 128 mm
Length 2800 mm
Mass of tube with the tube mechanism 40 kg
Packing one missile in a wooden case
36
HOLDING CORPORATION
PRACTICE SYSTEMS INTENDED FOR SHOOTING

SHORT DISTANCE TARGETS
VBR 128 mm M63; LRSV 128 mm M63/94 and LRSV 128
Armament of Army of Serbia includes multiple barrel
rocket launchers:
VBR 128 mm M63 PLAMEN
LRSV 128 mm M63/94 PLAMEN S
LRSV 128 mm M77 OGANJ
Crew training is important factor in conducting successful

and quick performance of combat systems. This practice
system allows complete training to be held in existing
testing fields with significant cost reduction, by avoiding the
use of combat rockets. The practice system is intended for
shooting short distance targets up to 3.500 m for common
training of all trainees in one army division.
This system contains the following elements:
128 mm practice rocket
57 mm practice rocket with signal head (GO)
The practice system is used for training of:
Charging and controlling of the firing range
Rocket firing.
57mm practice rocket with signal head (GO)

This rocket contains rocket engine and signal head with
UTI-2P3 fuses. 57 mm practice rocket with signal head
(GO) is of 57 mm caliber and 3.7 kg mass.
Stabilization of the rocket in its trajectory is achieved
aerodynamically with 8 fins.
The signaling compound total mass 0.2 kg, is basically the
mixture of photoflash compound (0.15 kg) and black
powder No.8 (0.05) kg.
128 mm practice PLAMEN rocket
The outer design of 128 mm practice PLAMEN rocket is
fully in accordance with the design of the original PLAMEN
rocket. Practice rocket contains an inserted barrel that is
used for launching 57 mm rockets.
-The design of the rocket provides the locking of 57 mm
rockets with GO inside 128 mm PLAMEN rocket.
128 mm practice OGANJ rocket for LRSV 128 mm M77
The outer design of 128 mm practice OGANJ rocket is fully
in accordance with the design of the original OGANJ rocket.
Practice rocket contains an inserted barrel that is used for
launching 57 mm rockets with GO.
The design of the rocket provides the locking of 57 mm
rockets with GO inside 128 mm OGANJ rocket.
37
HOLDING CORPORATION
ARTILLERY SHELLS, FUZES AND GUN
Krusik produces different caliber shells: 100, 105, 125, 130, 152 and 155mm used
for completion of artillery missiles, as well as fuses and gun primers.
We perform completion of artillery missiles. We are equipped for all types of acceptance
control tests done prior to including the device into the armament of an army.
38
HOLDING CORPORATION
MISSILE 9M14P1 and 9M14PB1

"MALJUTKA"
Antitank guided missile 9M14P1 and 9M14P1B1 with nose probe extended
Wire guided antitank missile with semiautomatic guidance system (SACLOS) 9M14P1
( and improved 9M14PB1with nose probe extended) is effective antitank combat weapon
at ranges up to 3000 m with high hit probability and high armour penetrating capability
up to 460 mm (9M14P1), i.e. 580 mm (9M14PB1) thickness.
39
HOLDING CORPORATION
Missile Data:
System Characteristics:
Guidance: wire-guided command
Maximum range 3000 m optical tracking by sighting line
Maximum effective firing range 500 m Propulsion: solid-propellant
Maximum range flight time 25 s motor, 2-stage
Firing rate (missile/min) 2 Warhead: hollow charge
Functional efficiency 97 % Missile diameter 120 mm
Armour penetrating capability Warhead caliber 120 mm
- missile 9M14P1 460 mm Length, (9M14P1) 865 mm
- missile 9M14P1B1 580 mm (9M14P1B1) 890 mm
Operating Fin span 460 mm
temperature range -40° to +50°C Launch weight 11 kg
Missile PM14P1 (or improved 9M14P1B1) is a part of the system comprising the following:
a) Manual guidance (MCLOS) b) Semiautomatic guidance (SACLOS)

- Portable manual guidance unit PO41LV - Launcher installed on the vehicle
- Portable launching box 9P111B1, and - Guidance system in the vehicle
- Missile 9M14P1 or 9M14P1B1 - Missile 9M14P1 or 9M14P1B1
The missile can be launched from the portable launching box 9P111B1 (also known as the "suitcase" )
in the manual guidance system (MCLOS), or from special, i.e. adapted combat vehicles, in the semi-
automatic or manual guidance system
The special vehicles include the one of Russian origin (BRDM-1, BRDM-2, BMP-1, BMD) as well as
armored personnel carrier (APC and IFV) of Yugoslav origin (BVP M80A and BVP M80P0).
The French helicopter GAZELLE has been adapted for launching of the missile.
Depending on the variant used, the packing may be in the form of:
a) Wooden box with one missile, and
b) Launching case 9P111B1, with one missile and two launching cases per wooden box.
Training of the operator-shooter is easier in the semiautomatic guidance system(SACLOS).
At launching and during flight the operator tracks the target movement through his reticle
and the missile is automatically guided by sighting line.
GUIDING DESK 9S415

1. Control panel body
2. Launching knob
3. Control lamp
4. Switch
5. Joystick
6. Telescopic sight holder
7. Optical sight
8. Battery
9. Carrying bag
40
HOLDING CORPORATION
MALYUTKA 2
ADVANCED ANTI ARMOUR MISSILE SYSTEM
Intended for antitank fight by neutralizing or

destroying armoured vehicles with or without ERA
(MALYUTKA 2M and MALYUTKA 2T) and
fortified objects and manpower (MALYUTKA 2F).
Three versions of missiles are developed

so far:
-Malyutka 2M with HEAT warhead and
enhanced penetration capability,
-Malyutka 2T with tandem warhead and
-Malyutka 2F with thermobaric warhead.
Basic characteristics: MALYUTKA 2M MALYUTKA 2T MALYUTKA 2F

Penetration(mm) 800 800+ERA 8kg TNT*
Range(m) 2.800 2.800 2.800
Caliber(mm) 120 120 90
Missile length(mm) 1.097 1.264 968
Weight(kg) 13,4 13,8 13,5
Average flight speed(m/s) 110 110 110
* TNT equivalent for thermobaric warhead
41
HOLDING CORPORATION
CARTRIDGE 82 mm WITH REACTIVE-CUMULATIVE

SHELL M72 FOR THE RECOILLESS GUN 82 mm, M60
Cartridge 82 mm with reactive-cumulative shell M72 is intended for destroying tanks,

self-propelled weapons and other armoured and combat vehicles. It can be used as well for
the annihilation of live force and the fire-arms of the enemy, that are in pillboxes or
blockhouses (fortifed buildings) far up to 1000 meters.
A. TECHNICAL DATA
- Calibre ............................................................. 82 mm
- Weight .......................................................... 7,800 kg
- Explosive sharge (TNT + RDX) ................. 0,710 kg
- Super quick fuze UT, M731
- Muzzle safety .................................................... 2,0 m
- Propellant charge NC ................................... 1,360 kg
- Propellant charge NC ................................... 1,360 kg
- Rocket sharge NGR ..................................... 0,900 kg
- Electric primer
B. BALLISTIC DATA
- Muzzle velocity ............................................. 390 m/s

- Maximum pressure ....................................... 750 bara
- Angular penetration of an armoured
stell plate (Hb 340) ....................................... 400 mm
- Range ............................................................. 1000 m
- Ordinate ............................................................... 2 m
C. PACKING
1 complete round in a cardboard box

3 cardboard boxes in a wooden case
- case dimensions (cm) ................................ 110x34x13

- case volume (m3) ................................................ 0,047
42
HOLDING CORPORATION
40mm Bullet with Blasting Projectile
Designed to be used against live force, in both open

and sheltered space. It is fired from grenade launcher
GP-25 mounted under the barrel of the Kalashnikov
machinegun ( AK-74, AKS-74, AKM, AK-101 ) as well as
new M21 rifles produced by “Zastava” Kragujevac. This
bullet can be fired directly ( holding the device on the
shoulder) to the range 50 to 400m, and indirectly (curved
trajectory ) to the range 200 to 350m.
- Caliber .................................................................. 40 mm
- Round mass ............................................................260 g
- Round length ..... ................................................105 mm
- Explosive charge FH-5...............................................49 g
- Muzzle velocity ...................................................76,5 m/s
- Powder charge weight ............................................0,6 g
- Max pressure of powder gases........................... 900 bar.
- Vertical target accuracy at 150 m
- per height Vv < 0,5 m
- per direction Vp < 0,5 m
- Max. range .............................................................400 m
- Accuracy at max range
- per distance Vdt <14m
- per direction Vpt < 7m
- Casualty radius ................................................. min. 9 m
- Fuse ...............................................................UT, M02 SP
- Muzzle safety ....................................................min. 15 m
+5
- Burning time of self-destruction device....................15 s
- The fuse has interrupted initial chain
- Bullet and fuse are waterproof
- Temperature range ..............................- 53° C to +71° C
- Suitable for all kinds of transportation
PACKING
- The bullet is packed in hermetically sealed plastic
container
- 40 containers are packed in wooden boxes
- Box dimensions ............................... 59,6 x 36,6 x 19,6 cm
- Total mass ........................................................... 23,5 kg
- Total volume ........................................................... 0,043 m³
43
HOLDING CORPORATION
40mm Bullet with Blasting Bounding Projectile, M07
Designed to be used against live force, in both open and sheltered space.
It is fired from grenade launcher GP-25 and GP-30 mounted under the barrel
of the Kalashnikov machinegun ( AK-74, AKS-74, AKM, AK-101 ) as well as new
M21 rifles produced by “Zastava” Kragujevac.
This bullet can be fired directly ( holding the device on the shoulder) to the range
50 to 400m, and indirectly (curved trajectory ) to the range 200 to 350m.
- Caliber .......................................................... 40 mm
- Round mass ....................................................300 g
- Round length ..... .........................................125 mm
- Explosive charge FH-5.......................................40 g
- Muzzle velocity ..............................................75 m/s
- Powder charge weight ....................................0,6 g
- per height Vv < 0,5 m
- per direction Vp < 0,5 m
- Max. range ......................................................400 m
- per distance Vdt <14m
- Casualty radius .......................................... min. 6 m
- Fuse .............................................................UT, M07
- Muzzle safety ............................................min. 15 m
- Burning time of self-destruction device..............15+5s
- Temperature range .......................- 53° C to +71° C
44
HOLDING CORPORATION
40mm Bullet with Cumulative Projectile
Intended for use against light armour combat and non

-combat vehicles at distances up to 150m. Beside this
primary cumulative effect, there is also the secondary
effect on enemy live force.
The bullet is fired from under-barrel grenade launcher
40mm GP-25, mounted under the barrel of Kalashnikov
machinegun ( AK-74, AKS-74, AKM, AK -101 ), as well as
new M21 rifles produced by “Zastava”Kragujevac.
- Caliber .......................................................... 40 mm
- Round mass................................................ 260 g
- Round length................................................108 mm
- Explosive charge.......................................... 32 g
- Muzzle velocity............................................ 76,5 m/s
- Mass of the powder charge.......................... 0,6 g
- Max. pressure of powder gases................. 900 bar
- Penetration through steel plate
under the angle of 90°............................ min.50 mm
- per height Vvt < 0,5 m
- per direction Vpt < 0,5 m
- Max. range....................................................400 m
- Accuracy at max. range
- per distance Vdt < 14m
- Fuse......................................................... UT,M02 SP
- Casualty radius...........................................min. 3 m
- Muzzle safety................................... ........ min. 15 m
- Safe activation distance.................................. 50 m
+5
- Burning time of self-destructing device.......... 15 s
- Temperature range........................... -53° C to +71° C
- The bullet is packed in hermetically sealed plastic
container, 40 containers are packed in wooden box
45
HOLDING CORPORATION
40mm Bullet with Incendiary Projectile
Intended for incending easily inflammable materials as well as

wounding enemy live force. The fragments of incediary mixture
can wound or inflame easily inflammable materials at distance up
to 5m. The bullet is fired from under-barrel grenade launcher
40mm GP-25, mounted under the barrel of Kalashnikov
machinegun ( AK-74, AKS-74, AKM, AK -101), as well as new
M21 rifles produced by “Zastava”Kragujevac. This bulet can be
fired directly ( holding the device on shoulder ), to the range
50 to 400m, and indirectly ( curved trajectory), to the ranges
200 to 350m.
- Caliber .......................................................... 40 mm
- Round mass................................................ 260 g
- Round length................................................105 mm
- Mass of smoke mixture................................ 80 g
- Max. Pressure of powder gases................. 900 bar
- Max. range....................................................400 m
- Fuse......................................................... UT,M02 SP
- Burning time of self-destructing device.......... 15+5s
- Temperature range........................... -53°C to +71°C
- The bullet is packed in hermetically sealed plastic container,
40 containers are packed in wooden box
46
HOLDING CORPORATION
40mm Bullet with Smoke Projectile
Intended for marking ground targets as well as blinding

enemy live force. The cloud made after the smoke mixture is
incended is compact, with diameter of min. 3m. The smoke
cloud can last 15 to 30s, and in normal weather conditions is
visible at 2-3 km distance. The bullet is fired from under-
barrel grenade launcher 40mm GP-25, mounted under the
barrel of Kalashnikov machinegun ( AK-74,AKS-74,AKM,
AK -101), as well as new M21 rifles produced by “Zastava”
Kragujevac. This bullet can be fired directly (holding the device
on shoulder ), to the range 50 to 400m, and indirectly (curved
trajectory), to the ranges 200 to 350m.
- Caliber .......................................................... 40 mm
- Round mass................................................ 260 g
- Round length................................................108 mm
- Mass of smoke mixture................................100 g
- Max. Pressure of powder gases................. 900 bar
- Max. range....................................................400 m
- Fuse......................................................... UT,M02 SP
- Muzzle safety............................................ min. 15 m
+5
- Burning time of self-destructing device.......... 15 s
- Temperature range........................... -53°C to +71°C
- The bullet is packed in hermetically sealed plastic container,
40 containers are packed in wooden box
- Suitable for all kinds of tranportation
47
HOLDING CORPORATION
40mm Bullet with Practice Projectile
Intended for training of soldiers for all tactical actions carrying

out with live projectile. The smoke mixture markes the spot
where the projectile has fallen, and the released gases can be
seen from the distance of 500m. The bullet is fired from under
-barrel grenade launcher 40mm GP-25, mounted under the
barrel of Kalashnikov mashinegun ( AK-74, AKS-74, AKM,
AK -101), as well as new M21 rifles produced by “Zastava”
Kragujevac. This bullet can be fired directly ( holding the
device on sholder) to the range 50 to 400m, and indirectly
(curved trajectory ), to the range 200 to 350m.
- Caliber........................................................... 40 mm
- Round mass................................................ 260 g
- Round length................................................105 mm
- Mass of incendiary mixture.......................... 10 g
- Muzzle velocity ........................................... 76,5 m/s
- Max. pressure of powder gases................. 900 bar
- Max. range......................................................400 m
- per distance Vdt < 14 m
- per direction Vpt < 7 m
- Fuse........................................................... UT,M02 SP
- Burning time of self-destructing device........... 15 +5s
- Temperature range............................. -53°C do + 71°C
- The bullet is placed in hermetically sealed plastic container,
40 containers are packed in wooden boxes
- Suitable for all kinds of transportation.
48
HOLDING CORPORATION
40mm x 46 Bullet with HE Projectile
Intended for use against live enemy force, in both opened and
sheltered space. The bullet is fired from under-barrel grenade
launcher 40mm M203, M79, HK 69A1. It can be used for firing
at targets at the distance from 30 to 400m.
- Caliber............................................................ 40 mm
- Round mass.... ........................................... 190 g
- Round length..... ..........................................103 mm
- Explosive charge....... ................................ RDX/TNT
- Number of fragments................................. 425
- Muzzle velocity ........................................... 78,5 m/s
- Max. range......................................................400 m
- Casualty radius.......................................... min. 5 m
- Fuse ............................................................. UT,M04
- Muzzle safety...................................................... 8 m
- Safe activation distance.................................... 30 m
- Burning time of self-destructing device............. 9 s
49
HOLDING CORPORATION
Bomba ručna M-84

Hand grenade M-84
- težina/mass............................................................................480 g
- dimenzije/dimensions......................................................ø 60x115
- eksplozivno punjenje - plastični eksploziv

explosive charge - plastic explosive.........................................95 g
- telo bombe - plastično sa čeličnim kuglicama

grenade body - plastic with steel balls..........................ø 2-2,3 mm
- sila izvlačenja osigurača/pulling force of safety element.......110 N
- sigurnosni ugao otklona kašike/

/safety angle of declination of fuze lever.............................min 50°
- vreme usporenja/ fuze:mechanic with delay of.............3,0 to 5,7 s
- sposobna za funkciju u temperaturnom intervalu/

/ use in temperature range of................................ -30°C to + 60°C
- sposobna za sve vrste transporta/

capable for any kind of transportation
PACKING
- 1 complete grenade per plastic box

- 24 psc per wooden case
- Wooden case dimensions (cm) ................ 50 x 35 x 23
- Case gross weight (kg) ......................................... 23.5
- Case volume (m³) ............................................... 0.040
Broj proboja - number of penetrations
5 m - min. 15 p/m²
Sigurna zona - 20 m - safety zone
10 m - min. 4 p/m²
15 m - min. 1 p/m²
50
HOLDING CORPORATION
Bomba ručna M-75

Hand grenade M-75
- težina/ mass.................................................................355 g
- dimenzije/dimensions.......................................Ø 57x89 mm
- eksplozivno punjenje - plastični eksploziv

/explosive charge - plastic explosive..............................36 g
- telo bombe - plastično sa čeličnim kuglicama

/grenade body - plastic with steel balls...........Ø 2.5-2.9 mm
- sila izvlačenja osigurača

/ pulling force of safety element..................................7-18 kg
- sigurnosni ugao otklona kašike

/safety angle of declination of fuze lever...................min 35°
- vreme usporenja / fuze: mechanic with delay of......3 - 4,4 s
- sposobna za funkciju u temperaturnom intervalu

/use in temperature range.............................-30°C to + 50°C
- sposobna za sve vrste transporta/

/ capable for any kind of transportation
PACKING
- 1 complete grenade per plastic box
36 pcs. per wooden case
- Wooden case dimensions (cm) ........................ 54 x 44 x 15
- Case gross weight (kg) .................................................... 23
- Case volume (m³) ....................................................... 0.038
2
6 m - min. 2 p/m
Broj proboja - number of penetrations
Sigurna zona - 25 m - safety zone
2
9 m - min. 1 p/m
51
HOLDING CORPORATION
CHAPED-CHARGE HAND GRENADE ( BRK )
INTENDED USE
The chaped-charge hand grenade BRK, hereinafter referred to as the BRK, is

intended to be used for disablement and annihilation of tanks and other stationary
or moving armour.
It belongs to the group of grenades thrown by hand-without any additional equipment
such as tube, launcher, etc.
On impact with the armour, the task of BRK is to defeat it with the shaped-charge jet
and to disable or annihilate the armour interior with the remaining hot gases from the jet.
TECHNICAL DATA
- Length ................................................................. 399 mm

- Warhead diameter ............................................. 74,5 mm
- Mass ........................................................................... 1kg
- Explosive mass .................................................... 0,34 kg
- Steel plate penetration ........................................ 280 mm
- Service temperature range ..................... -30°C to +50°C
PACKING
The BRK grenades are packed into the wooden box

suitable for mountain transportation, as follows:
- 12 pieces of warheads;
- rectangular sheet - metal container with 12 pieces of
separately paper-wrapped handles;
- round sheet-metal container with 12 pieces of ignition
systems-firing devices, each packed in styrofoam bearing.
52
HOLDING CORPORATION
Hand shock bomb
One of the new products in Krušik is "shock"

bomb used by special police forces.
"Shock" bomb has been developed for special
purposes, i.e. when it is necessary to attack
kidnappers or assassins, who hold hostages, in both
open and closed space without causing injuries.
The bomb has no particles but can disable with its
sound and light effect. It is suitable for use in the
means of public transport.
It is possible to gain double or triple sound/light
effect, when needed.
Main characteristics:
Fuse delay time: 1,5 s
Time interval between the sound effects: 0,7 s
Sound effect intensity: 130db to 15 m
Mass of the initial charge: 0,454 kg
Mass of the increment charge: 0,150 kg
Temperature range: - 30oC do + 55oC
Shelf life: 5 years
Packing:
- 10 complete bombs per carton
- Carton dimensions 585 x 340 x 75 mm
- Total mass 7,5 kg
53
HOLDING CORPORATION
ANTI-TANK DESTRUCTIVE PIERCING MINE - 6
PURPOSE: FOR DISABLEMENT AND DESTRUCTION OF TANKS AND

OTHER FIGHTING AND NON-FIGHTING VEHICLES BY
DESTRUCTIVE PIERCING ACTIVITY
1. Item dimensions ............................................................................... Ø 290 x 132 mm

2. Item mass .......................................................................................................... 7.2 kg
3. Explosive charge type ............................................................................... Cast TNT
4. Explosive charge mass ..................................................................................... 5.1 kg
5. Way of initiation ................................................................................ Through the fuze
6. Fuze arming (time) ............................................................................... 1 or 4 minutes
7. Way of fuze activation .................................................. - Through a lever
- By stepping on a mine plate
8. Activation force (daN) ........................................................ - Through a lever 1.3 - 1.7
- By stepping 150 -350
9. Stepping on area ........................................................................................... 214 cm²
10. Resistance to air impact wave ............................................................ To 3 daN/cm²
11. Functions in temperature range ................................................... - 30° C to + 60° C
12. Airtightness (waterproof) .......................................................................... To 0.2 bar
13. Way of setting ........................................................................... By hand
Minelaying PMR-3b
14. Way of transport ........................................... Capable for any type of transportation
15. Stability in mine field ....................... 6 months in the most unfavourable conditions
16. Way of packing .................................................... In a box, 4 (four) mines complete
17. Package dimensions ................................................................ 330 x 650 x 330 mm
18. Gross weight .................................................................................................... 43 kg
19. Storage time ............................................................................................... 15 years
20. Piecing action ............... Penetrates 40 mm stell plate from the distance of 800 mm
54
HOLDING CORPORATION
ANTIMAGNETIC ANTITANK MINE - 4 (TMA-4)
PURPOSE: FOR DESTRUCTION OF TANKS AND OTHER FIGHTING AND

TRANSPORT VEHICLES
1. Activation force .................................................................................... 100 - 200 daN

2. Stepping-on area ....................................................................... Ø 200 mm (314 cm²)
3. Explosive charge type ................................................................................. Cast TNT
4. Explosive charge mass ..................................................................................... 5.5 kg
5. Functions in temperature range ......................................................... - 30°C to - 60°C
6. Safety in transport and packing ...................... Capable for any type of transportation
7. Resistance to air impact wave ..................................................................... To 3 bars
8. Airtightness ................................................................................................To 0.2 bars
9. Way of initiation ................................................................................... Through a fuze
10. Way of setting ................................................................................... - Manually
- By mine-layer
11. Stability in mine field ......................... 6 months in the most unfavourable conditions
12. Item dimensions .............................................................................. Ø 285 x 110 mm
13. Item mass ........................................................................................................ 6.3 kg
14. Kind of packing ................................................................................................. Barel
15. Number of pieces in a packing set ......................................................................... 4
16. Package dimensions .................................................... Ø 330 x 370 mm (0.032 m³)
17. Gross weight .....................................................................................................28 kg
18. Storage time ............................................................................................... 20 years
55
HOLDING CORPORATION
EXPLOSIVE CUMULATIVE CHARGE - 1 (PEK - 1)
Use
Explosive Cumulative Charge-1 (PEK-
1) is used for quick mining of roads,
landing tracks and fields.
Main tactical characteristics

PEK-1 is activated by a detonator
primer that can be initiated electrically
or by means of fuse. PEK-1 explosion
in roads, landing tracks and fields
creates a mine hole, depth 1.5 to 2 m
and average diameter of 110mm.
PEK-l use temperature range is -30 to
+50ºC.
Characteristics
Diameter 112 mm
Height 195 mm
Height with tripod 550 mm
Mass 2.4 kg
Mass of the explosive 1.78 kg
Diameter of the penetration opening in
the steel plate 360 mm
Functioning
In order to create the mine hole, PEK-1 ought to be assembled with tripod and
placed in the desired spot. Detonator primer is placed in its bearing and initiated. It
activates the booster which activates the cumulative explosive charge.
The detonation creates a hole in the ground that can be used directly, without any
additional works.
Packing
10 pieces of PEK-1 are packed into one wooden case.
The mass of the packed case is 30 kg.
56
HOLDING CORPORATION
RAFAL BOMB FOR AEL MINE CATCHER (RBAEL)
By series of underwater explosions this bomb

creates the sound that lasts for several seconds,
and imitates the sound of a moving boat or ship,
only stronger then the engine signal itself
(20-30 db). Such created signal activates the
acustic signal of the floating mine in the distance
where it can not dammage the ship.
Use of this bomb provides safe movement of

boats and ships in water possibly containing
floating mines.
57
HOLDING CORPORATION
FUZES
"Krusik" is actively employed in research, development and production of classic military
program as well as complex rockets systems. We also produce fuzes and initial devices
that are assembled in our products.
"KRUSIK" PRODUCES FUZES THAT ARE ASSEMBLED IN THE FOLLOWING:

Mortar shells (HE, Smoke, Illuminating) in calibers: 60, 81/82 and 120 mm
Artillery projectiles for:
-Gun calibers: 76 mm, 85mm, 90mm, 100mm, 122mm and 130 mm.
-Tank gun, calibers: 115 mm and 125 mm
-Anti-tank gun, calibers: 82 mm, 100 mm and 105 mm
-Howitzer calibers: 105 mm, 122 mm and 152 mm
Airbombs weight 100 and 250 kg
Ait to air and air to ground rockets:
-57 mm HE rocket (BR-1)
-57 mm cumulative rocket (BR-2)
-57 mm cumulative-fragmentation type (BR-20)
-128 mm HE and cumulative (“MUNJA“)
Ground to ground rockets:
-128 mm HE rocket ("PLAMEN" M63)
-128 mm HE rocket ("OGANJ" M77)
Anti-armour devices:
-120 mm semiautomatic guided rocket ("MALJUTKA")
-Heat shells M79; M88; M72 i M91used with recoilless guns 82 mm M79 and M60A
-Cumulative shells 82 mm M80 for manual launchers 44 mm.
Mine-explosive devices
58
HOLDING CORPORATION
INITIAL DEVICES
INITIAL DEVICES INCLUDE:
Initials primer intended for shooting ammunition and gun primers
Primers (detonator, duplex, initial, electric) used with artillery, mortar and rocket
fuzes and explosive devices.
Different types of delays, boosters and transmittors.
59
HOLDING CORPORATION
OVERVIEW OF THE ASSORTMENT

The overview of the assortment can be shown through several elements, such as:
a) Used initial explosives and types of mixtures;

b) Type of primer and higher assembly;
c) Function;
d) Special requirements
a) The following initial explosives are used for production of mixtures: Mercury Fulminate, Lead-Azide
(several types), Tetrazene, Tricinate, and with other components (fuels, oxidants, sensitizers,..), the
listed
mixtures and primers can be classified as:
- fulminate type
- non-corrosive type.
b) Classified by type of primer and higher assembly, they include:

- berdan (for shooting ammunition)
- gevellot (for mortar ammo propellant charges and shotgun ammunition)
- boxer (for shooting ammunition and special type of ammo - we are currently involved in intensive
development);
c) Classified by function, the existing assortment includes:

- initial (puncturing, firing, striking,…);
- duplex (double effect primers);
- detonator (with a range of initial and high explosives);
- electric and electric inflammatory (depending on use and type of higher assembly)
- delay, transmitting, boosting (depending on use).
d) This group includes:

- delays and delay elements for different types of hand grenade fuzes with different types of mixtures
used (adjustment of delay times optional);
- all types of initial, pyrotechnic, delay, smoke, flash and other types of mixtures,…
- all types of electric detonators, No and per special request;
It is important to emphasize that all the requirements regarding the serial production of the above listed
products have been met, as follows:
- serial production authorizations issued by relevant authorities;

- the products are controlled and verified according to valid national and military standards
(JUS, SNO, PKP);
- all control-inspection procedures have strictly prescribed testing methods that include control
gauges and measuring devices;
- required certificates, licenses, export and transportation documents can easily be obtained from
the competent authorities;
- all products are manufactured and tested according to the procedures prescribed by the following
standards: JUS, ISO 9000 and SNO 9000.
When developing a new product with a customer, verification programs are made, including non-
standard
methods required for proving the desired quality.
Engineering and technical staff of FIS & ED are trained and capable to provide technical assistance in
engineering businesses, preparation of Design and Technical Documentation, as well as documentation
Required for construction and projecting the production facilities that fall under their domain of work.
60
HOLDING CORPORATION
CONTAINERS FOR STORAGE OF EXPLOSIVE MATERIALS - 500

( KSEM - 500 )
KSM-500 container is designed for storing of 500 kg of explosive.
Characteristics of the container:

-height.................................................1 800 mm
-width..................................................1 300 mm
-length.................................................1 800 mm
-mass of empty container......................1 480 kg
The container consists of two chambers. The basic one is made of

minimum 7 mm thick steel plate, while the 300 mm high 500 mm wide and
500mm, long initial devices chamber is made of minimum 10 mm thick steel
plate, so that no detonation of any accidentally or intentionally provoked
explosion would be transmitted to the explosive storing chamber.
The inside of the container is covered with 57 mm thick wooden coat
that doesn’t absorb humidity.
The container possesses a “sled”and holes for cables that serve to drag
the container from one place to another. An anchor can be attached to
the bottom of the container thus avoiding any smaller vehicle to
drag it.
The container has two grounding cross connections that leave no need for
building of any high lightning rod installation.The grounding must be done in
accordance with the current JUS regulations and must be less than 10 Ω.
On the container’s door, there is a rubber that ensures its tightness.
The container’s door locks with three padlocks.
The door on the initial devices chamber locks with two padlocks.
Self-extinguish paint represents container’s final protection.
Appropriate warning signs, that are in accordance with the UN symbols for
class 1 of danger materials, are put on the container.
61
HOLDING CORPORATION
PRODUCTION TECHNOLOGIES

HOLDING CORPORATION
PRODUCTION TECHNOLOGIES
I Machining of rotary parts
• Turning of parts with dia. up to Ø400 mm and length L= 2000 mm.
• Machining on CNC Lathe of parts with dia. up to Ø 350 mm and
length L= 1000 mm.
• Machining on six spindle automatic machine parts of dia. up to
Ø 67 mm.
• Machining on six spindle semi automatic machine parts of dia. up
to Ø 160 mm.
• Deep hole drilling of parts with hole dia. up to Ø 120 mm and length
from L=700mm.
II Machining of prismatic parts

• Machining on Machining Centers
Horizontal Machining Centers parts with dimensions up to 500 x
400 x 400 mm.
Vertical Machining Centers- parts with dimensions up to 500 x
400 x 350 mm.
• Machining on Flat-surface Grinding Machines.
III Heat treatment

• Heat treatment of steel parts with dia. up to Ø 400 mm, length up
to L=1250 mm and weight up to 300 kg.
• Heat treatment of non ferrous metals.
IV Manufacturing of plastic parts

• Pressing of thermosetting plastics in hydraulics presses, pressing
force from 600 kN to 6000 kN.
• Injection of thermoplastic.
V Chemical and electrochemical plating

• Electroplating (Zinc plating, Cadmium plating, Tinning plating, Nickel
plating and Silver) with dia. up to ~ 400 mm and length L=600 mm.
• Chromium plating up to L= 200 mm.
Oxidation (normal, hard and chrome acid) up to L=600 mm.
• Nickel chemical plating.
• Chrome plating of aluminum, copper and their alloys, up to
L=400mm.
• Phosphatization of parts with L=1600 mm.
Varnishing of parts with L=1000 mm
VI Production of die forging

• Pressure castings
Casting of non-ferrous metals (Al and Zn alloys). weight up to 2 kg.
Sand casting and metal coquilles up to 50 kg.
63
HOLDING CORPORATION
VII Cold formation technology

• Cutting of tin, thickness s=4 mm and L=2500 mm.
• Flattening and cutting tin stripes.
• Cutting and punching of elements in eccentric presses from
120 kN to 2500 kN.
• Manufacturing of complex parts in CNC presses.
• All types of extrusions, thicknes s= 6 mm and height H=350 mm.
• Manufacturing by method of injection.
• Folding of metal parts
Flat, L=2500 mm, thickness s=4mm
Rotary, L=2500 mm, thickness s=1.6 mm.
• Welding
VIII Explosive charge technologies

• Initial explosives
• Pressing of explosives
• Explosive casting
• Production and pressing of delay and increment compounds.
IX Metrological laboratory
X Test ground
64
HOLDING CORPORATION
QUALITY IN KRUŠIK

66
HOLDING CORPORATION
QUALITY IN KRUŠIK
Quality in „Krušik“ is cerefully controlled.
Quality management had been implemented in accordance with the Standard
JUS ISO 9001/2001.
The first certification was realized in 2002. and was followed by another certification
in 2006. The recertification, performed according to the regulations of certificate
validity process after the year of 2009 , we provided certificate for integrated
managment system, which, apart from the Standard 9001, also includes
Environment Protection Standard (SRPS 14001), Health and Worker Protection
Standard (OHSAS 18001) and Standard SRPS 17025.
Metrology takes an important place in this system.

Metrological laboratory has been conducting assessments and evaluation for
„Krušik“ and for other parties for years now.
The Factory has a laboratory for material evaluation where chemical and
mechanical characteristics of all marerials are defined.
67
HOLDING CORPORATION
In accordance with the demand, product tests are being done in the premises of
the Factory.
68
HOLDING CORPORATION
Krusik has been awarded two certificates for the Qualit Managment System:
SRPS ISO 9001:2008; ISO 9001:2008; SORS 9000/05,
ISO 14001:2004, OHSAS 18001:2007 and SRPS ISO/ IEC 17025:2006.
69
HOLDING CORPORATION
70
HOLDING CORPORATION
WORLD QUALITY COMMITMENT AWARD

The International World Quality Commitment Convention was held in Paris on October 15th and
16th, 2016.
On this occasion, HK Krušik a.d. has been granted the World Quality Commitment Award in the
Gold Category.
The Business Initiative Directions (BID) recognized the contribution of HK Krušik a.d. in terms
of Leadership, Quality, Innovation and Excellence and as a result ranked our Company among
the top companies committed to quality of its products.
71
Contents
BACKGROUND ........................................................................................................................... 2 - 4
COMPANY PROFILE .................................................................................................................. 5 - 6
FIELD OF ACTIVITY ........................................................................................................................ 7
MILITARY PROGRAM
- MORTAR AMMUNITION FAMILY ........................................................................................... 9 - 14
- AIRCRAFT ROCKET BR-1-57 ..................................................................................................... 15
- AIRCRAFT ROCKET BR-2-57 ..................................................................................................... 16
- AIRCRAFT ROCKET BR-20-57 ................................................................................................... 17
- BR-1-57 V, BR-2-57 V AND BR-20-57 V PRACTICE ROCKETS ................................................ 18
- PROGRAMMABLE GUIDED ROCKET - 200 (PRM-200) ............................................................ 19
- QUICK IVC 128 mm (Quick Air Target Simulator) ................................................................. 20 - 21
- FAB-100 M80 HE FREE-FALL BOMB ................................................................................... 22 - 23
- FAB-100 M80 HE RETARDED BOMB WITH UKB-100 M80 RETARDER SYSTEM ............ 24 - 25
- FAB-250 M79 HE FREE-FALL BOMB ................................................................................... 26 - 27
- FAB-250 M79 HE RETARDED BOMB WITH UKB-250 M80 RETARDER SYSTEM ............ 28 - 29
- RAB-250 M91 AIR BOMB ............................................................................................................ 30
- ROCKET 107 mm ................................................................................................................. 31 - 32
- SELF-PROPELLED MULTI-TUBE MISSILE LAUNCHER 122 mm - GRAD ........................ 33 - 34
- M63/94 SELF-PROPELLED MULTI-TUBE MISSILE LAUNCHER 128 mm - PLAMEN C ........... 35
- M77/94 SELF-PROPELLED MULTI-TUBE MISSILE LAUNCHER 128 mm - OGANJ C ............. 36
- PRACTICE SYSTEMS INTENDED FOR SHOOTING SHORT DISTANCE TARGETS ............ 37
- ARTILLERY SHELLS, FUZES AND GUN PRIMERS ................................................................... 38
- MISSILE 9M14P1 AND 9M14PB1 - MALYUTKA .................................................................. 39 - 40
- ADVANCED ANTI ARMOUR MISSILE SYSTEM - MALYUTKA 2 ................................................ 41
- CARTRIDGE 82 mm WITH REACTIVE CUMULATIVE SHEEL M72 FOR THE
RECOILLESS GUN 82 mm, M60 ................................................................................................. 42
- 40mm BULLET WITH BLASTING PROJECTILE ......................................................................... 43
- 40mm BULLET WITH BLASTING BOUNDING PROJECTILE, M07 ............................................ 44
- 40mm BULLET WITH CUMULATIVE PROJECTILE .................................................................... 45
- 40mm BULLET WITH INCENDIARY PROJECTILE ..................................................................... 46
- 40mm BULLET WITH SMOKE PROJECTILE .............................................................................. 47
- 40mm BULLET WITH PRACTICE PROJECTILE ........................................................................ 48
- 40mm x 46 BULLET WITH HE PROJECTILE .............................................................................. 49
- HAND GRENADE M-84 ............................................................................................................... 50
- HAND GRENADE M-75 ............................................................................................................... 51
- CHAPED-CHARGE HAND GRENADE ( BRK ) .......................................................................... 52
- HAND SHOCK BOMB .................................................................................................................. 53
- ANTI-TANK DESTRUCTIVE PIERCING MINE - 6 (TMRP - 6) .................................................... 54
- ANTIMAGNETIC ANTITANK MINE - 4 (TMA - 4) ......................................................................... 55
- EXPLOSIVE CUMULATIVE CHARGE - 1 (PEK - 1) .................................................................... 56
- RAFAL BOMB FOR AEL MINE CATCHER (RBAEL) .................................................................. 57
- F U Z E S ...................................................................................................................................... 58
- INITIAL DEVICES ................................................................................................................ 59 - 60
- CONTAINERS FOR STORAGE OF EXPLOSIVE MATERIALS - 500 (KSEM - 500) .................. 61
PRODUCTION TECHNOLOGIES .......................................................................................... 63 - 74
QUALITY IN „KRUŠIK“ .......................................................................................................... 66 - 71
72

Krusik - Catalog

Uploaded by

Copyright:

Available Formats

Krusik - Catalog

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Krusik - Catalog

Uploaded by

Copyright:

Available Formats

HOLDING CORPORATION

Formation of the present Company Krušik is

“Krušik” has the integrated quality management system certified as per:

PRODUCTION OF ARMAMENT AND MILITARY EQUIPMENT

MARKET ORIENTED PROGRAMS

HK „KRUŠIK” a.d. , 14000 VALJEVO, REPUBLIC of SERBIA

60 mm MORTAR AMMUNITION FAMILY

MORTAR AMMUNITION FAMILY

Type of shell TNT RDX/TNT RDX/TNT WP WP ILL. ILL.

Maximum range 2550 5100 5100 2550 5100 2450 4000

81/82 mm MORTAR AMMUNITION FAMILY

Shell HE HE HE Smoke Smoke ILL. ILL. Practice Practice Antisabo-

Type of shell TNT RDX/TNT RDX/TNT WP WP ILL. ILL. Target- RDX/TNT

500.000 Cd750.000 Cd 18m Shock-

120 mm MORTAR AMMUNITION FAMILY

Shell HE Smoke High smoke

Type of shell RDX/TNT RDX/TNT RDX/TNT WP HC in ejected

6500 7400 9400 6500 6000 6000 6600

20 m 24 m 24 m On hitting the 1.000.000 Cd 1.000.000 Cd

BR-1-57 mm Air-to-surface rocket launcher

Aircraft Rocket BR-1-57

BR -1- 57 rocket projectile is the Rocket of high

INITIATION BY MEANS INITIATION BY MEANS OF AUTOMATIC

Aircraft Rocket BR-2-57

Rocket BR-2-57 is of the hollow charge effect. It is 57

INITIATION BY MEANS INITIATION BY MEANS OF AUTOMATIC

Aircraft Rocket cal.57 mm BR-20-57 P1

In addition to the aircraft rockets BR-1-57 mm and

The aircraft rocket of a hollow -charge and

Rocket mass: 4.5 kg

BR-1-57 V, BR-2-57 V and BR-20-57 V

The Practice rockets BR-1-57 V, BR-2-57 V and

INITIATION BY MEANS INITIATION BY MEANS OF AUTOMATIC

PROGRAMMABLE GUIDED ROCKET - 200 (PRM-200)

QUICK ATS 128 mm

Quick air target simulator is non-quided rocket-target.

FAB-100 M80 HE FREE-FALL BOMB

The bomb may be released safe or armed at speeds up to 1000 km/h.

Bomb type.........................................................FAB-100 M80

FAB-100 M80 HE Retarded Bomb with

Bomb retardation reduces high risk of fragment damage to the aircraft by

FAB-100 M80 HE Retarded Bomb

Bomb type..........................FAB-100 M80 with UKB-100 M80

Weight of bomb without fuse.......................................128 kg

Length.(without fuse) ..............................................1617 mm

FAB-250 M79 HE Free-Fall Bomb

FAB-250 M79 HE bomb is intended for attack against targets

It is suitable for all current and projected aircraft capable to carry

The bomb may be released safe or armed at speeds up to 1000 km/h

FAB -250 M79

Bomb type.........................................................FAB-250 M79

FAB-250 M79 HE Retarded Bomb with

Bomb retardation reduces high risk of fragment damage to the aircraft by

FAB-250 M79 HE Retarded Bomb

RAB-250 M91 Air Bomb

FUZE UPB M91

107 mm M06 artillery rocket

Unguided extended range 107 mm rocket (107 mm M06)

Main parts of extended range 107 mm rockets