EE5303 Dynamics of Renewable Energy Sources PCC 3 - 0 - 0 3 Credits

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

EE5303 Dynamics of Renewable Energy Sources PCC 3 – 0– 0 3 Credits

Course Outcomes: At the end of the course student will be able to

CO1 Understand different renewable energy sources


CO2 Evaluate dynamic models of Distributed Energy Systems
CO3 Analyze and simulate control strategies for grid connected and off-grid systems
Develop control strategies for off Grid and grid integration studies of Distributed Energy
CO4
Sources.

CO-PO Mapping:

CO/PO PO-1 PO-2 PO-3 PO-4


CO-1 2 2 2 2
CO-2 3 2 3 3
CO-3 3 2 3 3
CO-4 3 2 3 3

Detailed Syllabus:

Introduction
Impacts of large scale integration of renewable Energy sources. Types of conventional and
nonconventional dynamic generation technologies, principle of operation and analysis of reciprocating
engines, gas and micro turbines, hydro, solar and wind based generation technologies.
Solar Photovoltaic Systems
Solar Resource, Generic Photovoltaic Cell, Equivalent Circuits, Cells to Modules to Arrays, I –V Curve,
Impacts of Temperature and Insolation, Shading impacts on I–V curves, I–V Curves for different loads,
MPPT, Grid-Connected Systems, Stand-Alone PV Systems, Dynamics of PV generation sources.
Advances in PV controls.
Wind Energy System
Wind Energy-generating Systems, Power extraction in the Wind, Impact of Tower Height, Maximum
Rotor Efficiency, Types of Wind Turbines, Fixed-speed Induction Generator (FSIG) based Wind
Turbines, Doubly Fed Induction Generator (DFIG) based Wind Turbines, Fully Rated Converter-based
(FRC) Wind Turbines, Dynamic modeling and analysis of wind energy system, Wind energy control
system, Forecasting and techno-economic analysis of RES.
Fuel Cell
Principles of Operation of Fuel Cells, Dynamic Modeling and Simulation of PEM Fuel Cells, Dynamic
Modeling and Simulation of Solid Oxide Fuel Cells, Principles of Operation and Modeling of
Electrolyzers, Power Electronic Interfacing Circuits for Fuel Cell Applications, Analysis and Control of
Grid Connected Fuel Cell Power Generation Systems, Control of Stand Alone Fuel Cell Power
Generation Systems, Hybrid Fuel Cell Based Energy System Case Studies,
Microturbine
Operating Principle of Microgrids, Microturbine Fuel and emissions, design and component of
Microturbines, control of Microturbines, Efficiency and Power of Microturbines, Application and
performance of microturbines, Site Assessment for Installation of Microturbines. Case studies.
Text Books:
1. G. Masters, “Renewable and Efficient Electric Power Systems”, IEEE- John Wiley and Sons Ltd.
Publishers, 2nd Edition, 2013.

2. F. A. Farret, M. G. Simoes, “Integration of Renewable Sources of Energy”, Wiley, 2nd Edition,


2017.

Reference Books:
1. C. S. Solanki, “Solar Photovoltaic: Fundamentals, technologies & Applications”, PHI Publishers,
3rd Edition, 2019.

2. O. Anaya-Lara, N. Jenkins, J. Ekanayake, P. Cartwright, M. Hughes, “Wind Energy Generation


Modelling and Control”, John Wiley & Sons Publishers, Ltd, 1st Edition, 2009.

3. M. H. Nehrir, C. Wang, “Modeling and Control of Fuel Cells: Distributed Generation


Applications”, Wiley-IEEE Press, 1st Edition, 2009.

4. P.E Claire Soares, “Microturbines: Applications for Distributed Energy Systems”, Elsevier Inc.,
1st Edition, 2007.

You might also like