FJA13009 — High Speed Switching

October 2008

FJA13009
High Speed Switching
• Suitable for Switching Regulator and Motor Control
• High Voltage Switch Mode Applications

1 TO-3P
1.Base 2.Collector 3.Emitter

Absolute Maximum Ratings* T a = 25°C unless otherwise noted

Symbol Parameter Ratings Units

VCBO Collector-Base Voltage 700 V
V CEO Collector-Emitter Voltage 400 V
VEBO Emitter-Base Voltage 9 V
IC Collector Current (DC) 12 A
ICP Collector Current (Pulse) 24 A
IB Base Current 6 A
PC Collector Dissipation (TC=25°C) 130 W
TJ Junction Temperature 150 °C
TSTG Storage Temperature - 65 ~ 150 °C

* These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.

Electrical Characteristics* Ta=25°C unless otherwise noted

Symbol Parameter Test Condition Min. Typ. Max. Units
V CEO(sus) Collector-Emitter Sustaining Voltage IC = 10mA, IB = 0 400 V
IEBO Emitter Cut-off Current VEB = 7V, IC = 0 1 mA
hFE DC Current Gain VCE = 5V, IC = 5A 8 40
VCE = 5V, IC = 8A 6 30
VCE(sat) Collector-Emitter Saturation Voltage IC = 5A, IB = 1A 1 V
IC = 8A, IB = 1.6A 1.5 V
IC = 12A, IB = 3A 3 V
VBE(sat) Base-Emitter Saturation Voltage IC = 5A, IB = 1A 1.2 V
IC = 8A, IB = 1.6A 1.6 V
Cob Output Capacitance VCB = 10V , f = 0.1MHz 180 pF
fT Current Gain Bandwidth Product VCE = 10V, IC = 0.5A 4 MHz
tON Turn On Time VCC =125V, IC = 8A 1.1 ms
tSTG Storage Time IB1 = - IB2 = 1.6A 3 ms
tF Fall Time RL = 15,6W 0.7 ms
* Pulse Test: Pulse Width£300ms, Duty Cycle£2%

© 2007 Fairchild Semiconductor Corporation www.fairchildsemi.com

FJA13009 Rev. 1.0.0 1
 FJA13009 — High Speed Switching
Typical Characteristics

VBE(sat), VCE(sat)[V], SATURATION VOLTAGE

100 10

V CE = 5V IC = 3 IB
hFE, DC CURRENT GAIN

1 VBE(sat)

10

0.1
VCE(sat)

1 0.01
0.1 1 10 100 0.1 1 10 100

IC[A], COLLECTOR CURRENT IC[A], COLLECTOR CURRENT

Figure 1. DC current Gain Figure 2. Base-Emitter Saturation Voltage

Collector-Emitter Saturation Voltage

1000 10000
VCC=125V
IC=5IB
tR, tD [ns], TURN ON TIME
Cob[pF], CAPACITANCE

100 1000
tR

10 100 tD, VBE (off)=5V

1 10
0.1 1 10 100 1000 0.1 1 10 100

VCB[V], COLLECTOR-BASE VOLTAGE IC[A], COLLECTOR CURRENT

Figure 3. Collector Output Capacitance Figure 4. Turn On Time

10000 100

VCC=125V
IC=5IB
tSTG, tF [ns], TURN OFF TIME

10
IC[A], COLLECTOR CURRENT

m
10

10 DC
0m
s
1m

tSTG
s

1000 1

0.1

tF

100 0.01
0.1 1 10 100 1 10 100 1000

IC[A], COLLECTOR CURRENT VCE[V], COLLECTOR-EMITTER VOLTAGE

Figure 5. Turn Off Time Figure 6. Forward Bias Safe Operating Area

© 2007 Fairchild Semiconductor Corporation www.fairchildsemi.com

FJA13009 Rev. 1.0.0 2
 FJA13009 — High Speed Switching
Typical Characteristics

140
100
Vcc=50V,
IB1=1A, I B2 = -1A 120
L = 1mH

PC[W], POWER DISSIPATION

IC[A], COLLECTOR CURRENT

10 100

80

1
60

40
0.1

20

0.01 0
10 100 1000 10000 0 25 50 75 100 125 150 175

VCE[V], COLLECTOR-EMITTER VOLTAGE o

Tc[ C], CASE TEMPERATURE

Figure 7. Reverse Bias Safe Operating Area Figure 8. Power Derating

© 2007 Fairchild Semiconductor Corporation www.fairchildsemi.com

FJA13009 Rev. 1.0.0 3
 FJA13009 — High Speed Switching
Package Dimension (TO-3P)

5.00
4.60

15.80 1.65
15.40 1.45
5.20
4.80
(R0.50)

20.10
19.70 18.90
18.50

3.70
3.30

(1.85)
2.20
1.80
2.60
2.20
3.20 20.30
2.80 19.70

1.20
0.55 0.80

1 3

5.45 5.45 0.75

0.55

(R0.50)

NOTES:
A) THIS PACKAGE CONFORMS TO EIAJ
SC-65 PACKAGING STANDARD.
B) ALL DIMENSIONS ARE IN MILLIMETERS.
C) DIMENSIONING AND TOLERANCING PER
ASME14.5 1973.
D) DIMENSIONS ARE EXCLUSIVE OF BURRS,
MOLD FLASH, AND TIE BAR EXTRUSIONS.
E) DRAWING FILE NAME: TO3P03AREV2.

© 2007 Fairchild Semiconductor Corporation www.fairchildsemi.com

FJA13009 Rev. 1.0.0 4
 FJA13009 High Speed Switching
TRADEMARKS
The following are registered and unregistered trademarks and service marks Fairchild Semiconductor owns or is authorized to use and
is not intended to be an exhaustive list of all such trademarks.
ACEx® Green FPS™ Power247® SuperSOT™-8
Build it Now™ Green FPS™ e-Series™ POWEREDGE® SyncFET™
CorePLUS™ GTO™ Power-SPM™ The Power Franchise®
CROSSVOLT™ i-Lo™ PowerTrench®
CTL™ IntelliMAX™ Programmable Active Droop™
Current Transfer Logic™ ISOPLANAR™ QFET® TinyBoost™
EcoSPARK® MegaBuck™ QS™ TinyBuck™
MICROCOUPLER™ QT Optoelectronics™ TinyLogic®
Fairchild® MicroFET™ Quiet Series™ TINYOPTO™
Fairchild Semiconductor® MicroPak™ RapidConfigure™ TinyPower™
FACT Quiet Series™ MillerDrive™ SMART START™ TinyPWM™
FACT® Motion-SPM™ SPM® TinyWire™
FAST® OPTOLOGIC® STEALTH™ µSerDes™
FastvCore™ OPTOPLANAR® SuperFET™ UHC®
®
FPS™ SuperSOT™-3 UniFET™
FRFET® PDP-SPM™ SuperSOT™-6 VCX™
Global Power ResourceSM Power220®

DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS
HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF
THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE
UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF
FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE
PRODUCTS.

LIFE SUPPORT POLICY

FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR
SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.

As used herein:
1. Life support devices or systems are devices or systems 2. A critical component is any component of a life support
which, (a) are intended for surgical implant into the body, or device or system whose failure to perform can be reasonably
(b) support or sustain life, and (c) whose failure to perform expected to cause the failure of the life support device or
when properly used in accordance with instructions for use system, or to affect its safety or effectiveness.
provided in the labeling, can be reasonably expected to result
in significant injury to the user.

PRODUCT STATUS DEFINITIONS

Definition of Terms
Datasheet Identification Product Status Definition
This datasheet contains the design specifications for product development.
Advance Information Formative or In Design
Specifications may change in any manner without notice.
This datasheet contains preliminary data; supplementary data will be pub-
Preliminary First Production lished at a later date. Fairchild Semiconductor reserves the right to make
changes at any time without notice to improve design.
This datasheet contains final specifications. Fairchild Semiconductor reserves
No Identification Needed Full Production
the right to make changes at any time without notice to improve design.
This datasheet contains specifications on a product that has been discontin-
Obsolete Not In Production ued by Fairchild semiconductor. The datasheet is printed for reference infor-
mation only.

Rev. I31
© 2008 Fairchild Semiconductor Corporation www.fairchildsemi.com
FJA13009 Rev. A1 5