Scribd Logo
Upload

Welcome to Scribd!

  • 32 views

    Technical Data Sheet: Tisil / Synthetic Calcium Silicate Macrospheres

    Uploaded by

    Hemant
    TiSil is a synthetic calcium silicate hydrate that appears as a white fine powder or white slurry. It has a dry bulk density of 12 lb/ft3 and pH of 10 when in slurry form. The primary particles are 2-4 micron long fibers with a diameter of 20-50 nm, giving it a length to diameter ratio of 50-100. It is mainly composed of silica, calcium oxide, and alumina. Heavy metal levels are low.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Technical Data Sheet: Tisil / Synthetic Calcium Silicate Macrospheres

    Uploaded by

    Hemant
    32 views1 page
    TiSil is a synthetic calcium silicate hydrate that appears as a white fine powder or white slurry. It has a dry bulk density of 12 lb/ft3 and pH of 10 when in slurry form. The primary particles are 2-4 micron long fibers with a diameter of 20-50 nm, giving it a length to diameter ratio of 50-100. It is mainly composed of silica, calcium oxide, and alumina. Heavy metal levels are low.

    Original Description:

    tilsil

    Original Title

    TiSilDataSheet

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    TiSil is a synthetic calcium silicate hydrate that appears as a white fine powder or white slurry. It has a dry bulk density of 12 lb/ft3 and pH of 10 when in slurry form. The primary particles are 2-4 micron long fibers with a diameter of 20-50 nm, giving it a length to diameter ratio of 50-100. It is mainly composed of silica, calcium oxide, and alumina. Heavy metal levels are low.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    32 views1 page

    Technical Data Sheet: Tisil / Synthetic Calcium Silicate Macrospheres

    Uploaded by

    Hemant
    TiSil is a synthetic calcium silicate hydrate that appears as a white fine powder or white slurry. It has a dry bulk density of 12 lb/ft3 and pH of 10 when in slurry form. The primary particles are 2-4 micron long fibers with a diameter of 20-50 nm, giving it a length to diameter ratio of 50-100. It is mainly composed of silica, calcium oxide, and alumina. Heavy metal levels are low.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Technical Data Sheet

    TiSil / Synthetic Calcium Silicate Macrospheres


    TYPICAL PHYSICAL PROPERTIES
    Color White
    Dry Appearance Fine Powder
    Wet Appearance White Slurry
    Description Synthetic Calcium Silicate Hydrate
    Crystalline Silica Below Detectable Limits
    Dry Water Absorption, % by weight 300 – 1000 %
    Dry Oil Absorption, % by weight 300 – 400 %
    Dry Specific Gravity About 2.4
    3
    Dry Bulk Density 12 lb / ft
    Dry Moisture 3–5%
    pH Slurry 10 ± 0.5
    Slurry Solids 0.35 – 0.8 # / gallon
    ISO Brightness 90 – 95
    Primary Particle Size
    Length (L) 2 – 4 micron long fibers
    Diameter (D) 20 – 50 nm diameter
    L/D Ratio 50 – 100
    Secondary Particle Size 15 – 25 micron balls
    2
    Surface Area, 40 – 325 m /g

    TYPICAL CHEMICAL PROPERTIES HEAVY METALS PROPERTIES


    SiO2 37.0 % Ag Below Detectable Limits
    Al2O3 0.9 % As 3.9 ppm
    CaO 56.6 % Cd Below Detectable Limits
    MgO 0.4 % Cr 11.0 ppm
    Na2O 0.9 % Cu 3.6 ppm
    K2O 0.1 % Hg Below Detectable Limits
    Fe2O3 0.6 % Mo 3.9 ppm
    MnO 0.0 % Ni 2.9 ppm
    TiO2 0.1 % Pb 1.7 ppm
    P2O5 0.4% Se 0.2 ppm
    Cr2O3 0.0 % Zn 54.8 ppm
    LOI 3.0 %

    Pacific NANO Products India, Pvt. Ltd.


    12/16 Ground Floor, Raghu Cottage, Sarva Priya Vihar, New Delhi, 110 017

    You might also like