ANVIL Pipe Fittings Catalog PDF

Next Return Return to TOC
ANVIL INTERNATIONAL, INC.

CORPORATE OFFICES 110 Corporate Drive, Suite 10 • P.O. Box 3180
www.anvilintl.com Portsmouth, NH 03802-3180
Tel: 603-422-8000 • Fax: 603-422-8033
E-mail address — [email protected]
ANVIL MANAGEMENT TEAM NORTH EAST REGION SOUTH EAST REGION

Thomas E. Fish President Regional Service Center: Servicing Connecticut, Regional Service Center: Servicing Alabama,
Delaware, Maine, Maryland, Massachusetts, Florida, Georgia, Mississippi, North Carolina,
Bob Arison Regional Vice President New Hampshire, New Jersey, New York, South Carolina, Tennessee, Virginia
Ernie Chuter Director, Marketing East Pennsylvania, Rhode Island, Vermont,
Virginia 6344 Cash Court
Laura DiLiegro Director, Human Resources
Norcross, GA 30071
Bob Kim Vice President, Manufacturing 2530 Pearl Buck Road Tel: 770-662-8177 • Fax: 770-662-0284
John Martin Vice President, National Bristol, PA 19007 Tom Ward — Regional Vice President
Accounts Tel: 215-788-4056 • Fax: 215-788-4475
Tom Ward — Regional Vice President Sales Office
Ron Pound Director, National Operations
1202 Tech Blvd., Suite 10
William Strouss Vice President, Finance Tampa, FL 33619
Dean Taylor Regional Vice President MID WEST REGION
Pipe Fittings Catalog

Tel: 800-429-0703 • Fax: 813-663-0811
Tom Ward Regional Vice President Regional Service Center: Servicing Illinois,
Indiana, Iowa, Kansas, Kentucky, Michigan, WESTERN REGION
Minnesota, Missouri, Nebraska, North and South
ANVIL MANUFACTURED PRODUCTS Dakota, Ohio, West Pennsylvania, West Virginia, Regional Service Center: Servicing Alaska, Arizona,
Wisconsin California, Hawaii, Idaho, Montana, Nevada, Oregon,
Columbia, PA Foundry Utah, Washington
1411 Lancaster Avenue 750 Central Avenue
University Park, IL 60466 1385 Greg Street
Columbia, PA 17512
Tel: 708-534-1414 • Fax: 708-534-5441 Sparks, NV 89431
Tel: 717-684-4400 • Fax: 717-684-6868
Toll Free: 1-800-301-2701 Tel: 775-331-7029 • Fax: 775-331-5075
Henderson, TN Plant Toll Free: 1-800-572-0051
Dean Taylor — Regional Vice President
2870 Old Jackson Road Bob Arison — Regional Vice President
Henderson, TN 38340 Sales Office
Tel: 731-989-3551 • Fax: 731-989-4144 321 North Point Drive Satellite Offices
Rich Brooks — Plant Manager Pittsburgh, PA 15233 P.O. Box 10206 • Portland, OR 97210
Tel: 412-321-6544 • Fax: 412-321-6643 Tel: 503-223-7101 • Fax: 503-223-7130
Canvil
390 Second Avenue Toll Free: 1-800-441-1352 14103 Borate St.
Simcoe, ON Canada N3Y 4K9 Satellite Offices Sante Fe Springs, CA 90670
Tel: 519-426-4551 • Fax: 519-426-5509 1201 W. 96th Street Tel: 562-802-7459 • Fax: 562-802-7519
Brent Widdifield — Plant Manager Bloomington, MN 55431
Longview, TX Plant Tel: 952-884-7131 • Fax: 952-887-1501 CANADA — MUELLER-FLOW CONTROL
305 Simms Toll Free: 1-800-733-7131 Kevin Fullan – Vice President
Longview, TX 75604 9530 Le Saint Drive • Fairfield, OH 45014 Tel: 905-664-1459 ext 272
Tel: 903-759-4417 • Fax: 903-759-1782 Tel: 513-682-2330 • Fax: 513-870-0109 Doug Crawford –
Van O’Keefe — Plant Manager Toll Free: 1-800-837-2424 National Marketing Manager
J.B. Smith 8615 East 33rd Street Tel: 905-664-1459 ext 248
6618 Navigation Indianapolis, IN 46226
Alberta
Houston, TX 77011 Tel: 317-895-2424 • Fax: 317-895-2430
Tel: 713-928-5460 • Fax: 713-928-6733 Toll Free: 1-800-837-1515 Calgary - Tel: 403-246-0033 • Fax: 403-246-0051
Ray Mullenix — Plant Manager Edmonton - Tel: 780-452-9841 • Fax: 780-452-9873
1930 Warren Street
North Kingstown, RI Plant Kansas City, MO 64116 British Columbia
160 Frenchtown Road Tel: 816-474-0500 • Fax: 816-221-7150 Delta - Tel: 604-940-1449 • Fax: 604-940-9878
North Kingstown, RI 02852 Toll Free: 1-800-877-7007 Nanaimo - Tel: 250-758-1551 • Fax: 250-758-1160
Tel: 401-886-3001 • Fax: 401-886-3010 24600 Northline Road • Taylor, MI 48180 Prince George -
Robert Taylor — General Manager Tel: 734-947-3083 • Fax: 734-947-4682 Tel: 250-561-1219 • Fax: 250-561-7358
Toll Free: 1-800-279-1601 Vancouver City -
ENGINEERED PIPE SUPPORTS Tel: 604-875-6990 • Fax: 604-875-6962
• Structural Fabrication SOUTH WEST REGION Manitoba
• Field Services Regional Service Center: Servicing Arkansas,
Colorado, Louisiana, New Mexico, Oklahoma, Winnipeg - Tel: 204-774-3461 • Fax: 204-786-5044
• Non-destructive Testing Texas, Wyoming
Contact: North Kingstown, RI Plant Ontario
1313 Avenue R
Tel: 401-886-3001 Stoney Creek -
Grand Prairie, TX 75050
Tel: 972-343-9206 • Fax: 972-641-8946 Tel: 905-664-9230 • Fax: 905-664-9556
ANVIL RESEARCH AND DEVELOPMENT Bob Arison — Regional Vice President Toronto - Tel: 416-251-4171 • Fax: 416-251-7087
20 Thurber Blvd. Sarnia - Tel: 519-336-7690 • Fax: 519-336-1621
Smithfield, RI 02917 Satellite Offices Sudbury - Tel: 705-671-9600 • Fax: 705-671-8082
Tel: 401-349-3020 6999 Old Clinton Rd
Fax: 401-349-3021 Houston, TX 77020 Quebec
Tel: 713-675-6371 • Fax: 713-678-7858 Montreal - Tel: 514-342-2100 • Fax: 514-342-2177
2600 W. 42nd Street • Odessa, TX 79764 Ste-Foy - Tel: 418-650-5766 • Fax: 418-266-0252
ANVIL NATIONAL ACCOUNTS
Tel: 915-366-2803 • Fax: 915-366-0890 Saskatchewan
John Martin -
Vice President National Accounts 4200 Holly Street • Denver, CO 80216 Regina - Tel: 306-543-5536 • Fax: 306-545-0390
Tel: 303-394-2856 • Fax: 303-394-3520 Tel: 303-394-2178 • Fax: 303-321-3050 Saskatoon - Tel: 306-242-6788 • Fax: 306-242-5089
#010 / Printed in USA / PL / 10.02 / 20M / ©2002 Anvil International, Inc. PF-10.02
Previous Next Return Return to TOC
FIRE PROTECTION
PRODUCTS
BROCHURE
Order Document
Number 038
MINING
BROCHURE
Order Document
Number 350
GRUVLOK
GROOVED PIPING
PRODUCTS CATALOG
Order Document
Number 040
PIPE HANGERS
CATALOG
Order Document
Number 165
OIL & GAS PRODUCTS

SOLUTION
BROCHURE
Order Document
Number 320
Contact an Anvil Representative to Order Literature www.anvilintl.com

ANVIL PRODUCT LINES
The Largest and Most Complete Fitting • Malleable Iron Fittings & Unions
and Hanger Manufacturer in the World
• Cast Iron Fittings & Flanges
• Forged Steel Fittings, Unions

CORE MARKETS & Couplings
From plumbing, mechanical, and fire protection, to mining, oil and gas, and
OEMs, our ability to provide effective solutions directed at individual • Welded & Seamless Pipe Nipples
markets is unmatched in the industry. Innovative responses designed to
meet specific demands, and more than 150 years of experience, insight,
• Steel Couplings
and understanding, ensures you have the right quality product for your
application.
• Pipe Hangers & Supports
QUALITY • Engineered Hangers
Our ISO 9000 manufacturing facilities produce a package of products
unmatched by any other single manufacturer, while setting an industry • Strut & Strut Fittings
standard for dependability and effectiveness recognized around the
world. It’s a standard that has made our products, and our name,
• Couplings,
synonymous with the word “quality” itself.
Fittings & Valves
WHOLESALE DISTRIBUTION • J.B. Smith Swage Nipples

Anvil is dedicated to the distribution channel and to our wholesale & Bull Plugs
customers, enhancing the already strong and vital relationships we’ve
established together over the years. • Unions
CUSTOMER SERVICE AND SUPPORT • Tee-Offs

Responsive customer support and service can mean the difference
between simply delivering products to you, and delivering solutions. • UL-FM Valves
That’s why we offer on-site technical assistance and training, engineers
on call, and fast, accurate responses to customer inquiries. Plus, • Drop Nipples
improved inventory control and operating efficien-
cies at our Regional Service Centers mean improved
productivity, accuracy, and turnaround times.
ANVIL’S HISTORY
Anvil International can trace its roots back to the
mid-1800s. As we’ve evolved—from Grinnell Supply
Sales and Manufacturing to Anvil—we’ve earned a
global reputation for quality, effective products you
can trust. We will build on the solid foundation of
our past by continuing to provide the highest level
of critical service and support, R&D, and the most
complete package of fittings, couplings, hangers,
and supports in the world.
Our products have earned your trust. Our company will keep it.
Click on the page number to jump to that page

J. B. Smith Oil Country Steel Fittings
specifications .................................................... 5 - 6 specifications........................................................45
carbon steel swage nipples end finishes ..........................................................46
concentric .................................................. 7 - 8 pipe nipples ..........................................................46
eccentric ......................................................... 9 merchant couplings
stainless steel swage nipples ................................. 10 standard & extra strong ...........................47 - 50
carbon steel bull plugs .......................................... 11 API line pipe couplings ..........................................51
API thread standards ............................................ 12 AAR class 300 couplings .......................................52
tubing swages, casing swages ........................ 13 - 14 merchant steel plugs and bushings ........................53
tubing casing bull plugs ........................................ 15 steel fittings for plastic pipe ..................................54
adapter nipples ..................................................... 16 steel hose fittings..................................................55
tubing nipples
standard ........................................................ 16 Malleable Iron
extra heavy .................................................... 16 pressure-temperature ratings .................................57
casing nipples ...................................................... 17 threaded fittings
casing couplings, short and long thread ................. 18 standard class 150 ..................................58 - 66
plain ..............................................................67
Forged Steel Fittings extra heavy class 300 ..............................68 - 71
specifications ....................................................... 19 unions & union fittings .....................................72-73
threaded fittings notes page ............................................................74
class 2000 ..................................................... 20
Cast Iron
class 3000 .............................................. 21 - 22
class 6000 .............................................. 23 - 24 pressure-temperature ratings .................................75
socket-weld fittings threaded fittings
class 3000 .............................................. 25 - 26 standard class 125 ..................................76 - 91
class 6000 .............................................. 27 - 28 extra heavy class 250 .....................................92
high pressure plugs & bushings ............................ 29 safety valve discharge elbow..................................93
socket-welding reducer inserts ....................... 30 - 32 drainage ..........................................................94-98
pressure ratings/reducing fittings .......................... 33 flange fittings
forged steel anvilets standard class 125 .................................. 99-104
specifications................................................. 33 extra heavy class 250 ............................ 105-107
run size consolidation .................................... 34 iron flanges
buttweld anvilets standard class 125 ................................ 108-109
full & reducing, std. & extra strong .......... 35 - 37 extra heavy class 250 ................................... 110
full & reducing, sch. 160
& double extra strong..................................... 38 Miscellaneous
socket-weld anvilets all purpose gaskets ............................................. 111
full & reducing, class 3000 & 6000 ................. 39 bolts & templates ......................................... 112-113
threaded anvilets floor and ceiling plates ........................................ 114
full & reducing, class 3000 & 6000 ................. 40
elbow anvilets General Information
buttweld, threaded & socket-weld Standard malleable iron fittings............................ 115
class 3000 & 6000 ......................................... 41 cartons ................................................. 116-121
lateral anvilets palleted................................................. 122-134
buttweld, threaded & socket-weld, cast iron fitttings - palleted ........................... 135-137
class 3000 & 6000 ......................................... 42
steel pipe nipples - cartons .................................. 138
unions
"25 Packs" Standard/Sch. 40 ......................... 139-142
class 3000 ..................................................... 43
"25 packs" XS/Sch. 80 .................................. 143-146
class 6000 ..................................................... 43
nipple assortments .............................................. 147
lug nut .......................................................... 44
notes page .......................................................... 148
standards and specifications ................................ 149
alphabetical index ........................................ 150-151
figure number index ............................................ 152
conditions and terms of sale ................................ 153
PF – 4
J. B. Smith Oil Country Products
J.B. Smith oil country tubular fittings, swages and bull plugs add an All J.B. Smith product conforms to the following
important dimension to the industry’s leading line of flow control specifications:.
products offered by Anvil. J.B. Smith is a respected name and its
❑ API 5B – Threading
products are well known for high quality and consistency.
❑ API 5CT – License - End Finishings, Raw Material
Full Traceability
❑ ASME B16.9 –Weld Bevels
All J.B. Smith swages, bull plugs, tubing and casing nipples, and
chambers are traceable to the original mill test report.To ensure ❑ MSS-SP-95 - Swages and Bull Plugs
traceability, all fittings are steel stamped as follows: ❑ ASTM A234A-00 WPB – Heat Treatment, Raw Materials
Material Specification ❑ ASTM B633-86 Type III Class III – Zinc Electroplate
❑ WPB (Line Pipe Only) ❑ CHARPY IMPACT - As Required
❑ J-55, N80, L-80, etc. (oil country sizes) ❑ NACE – MR-01-75 - As Required
Raw Material Code ❑ DNV – As Required
Each is stamped with a three letter code for identifying raw ❑ ISO 9000
material type, details of purchase and mill test report.
Heat Treatment
When marked WPB, an acceptable heat treatment is understood to
have been performed. Fittings, cold or hot formed from pipe, bear
an additional two letter code for final heat treatment traceability.
PF – 5
Swage Nipples, Bull Plugs,
Oil Country Fittings,
Couplings, Stainless Swages
MANUFACTURING SPECIFICATION MARKING

J.B. Smith manufactures swage nipples and bull plugs in accor- All J.B. Smith fittings are permanently marked as follows:
dance with A234 and MSS-SP-95, from A-106 Grade B seamless
pipe and A-1000 series, low to medium carbon, fine grain bar ❑ Manufacturer’s Symbol - JBS
stock, and heat treated to these specifications.The chemical and
physical properties of the raw material fall within the ranges listed ❑ Material Specification
below. WPB (Line Pipe Sizes)
All fittings are manufactured in the U.S.A. J-55, N80, L-80, etc. (Oil Country Sizes)
❑ Raw Material Code - Each part is die stamped with a
TRACEABILITY
three letter code identifying the raw material type, details of
All raw material purchased by J.B. Smith is fully traceable to the purchase and steel mill test report.
mill source.A three digit letter code appears on all Smith products
made since the institution of this program. As a result, mill test ❑ Heat Treatment - Heat treatments are performed to
reports are now available at any time on products so coded. (See ASTM A234A-00 WPB.
EXTRAS for MTR charges.) All oil country sizes formed from pipe have been normalized
but are unmarked to avoid confusion with the symbol N-80.
PRESSURE RATINGS
Fittings cold or hot formed from pipe and bar fittings bear an
Due to the wide variation in service conditions, temperature,
additional two letter code indicating the hour and day the part
vibrations, etc., J.B. Smith Mfg. can make no recommendations
received final heat treatment.
as to allowable working pressure of swage nipples and bull plugs.
There are a number of working pressure formulas from which ❑ Label information - Size and Wall Thickness.
the end user may choose to determine the required wall thickness
THREADING
of the piping system. It is our responsibility only to furnish a fit-
ting with end dimensions equal to those of the pipe size and Line pipe, tubing and casing are in conformance with API 5B.
schedule ordered. COATINGS
MATERIAL CERTIFICATION – CARBON STEEL ❑ Zinc Electroplate – ASTM B633-86 Type III Class III
J.B. Smith certifies that the material used to manufacture line pipe ❑ Paint (Beveled Ends)
sizes of swage nipples and bull plugs has been processed to
comply with all requirements of ASTM A234A-00 WPB and the WELD BEVELS
chemical and physical properties of the raw material fall within Weld Bevels are machined as per ASME B-16.9
the ranges listed below.
A234A-00 WPB Chemical Composition Requirements

C MN P S SI CR MO NI CU V CB
.30 .29 - .05 .058 .10 .40 .15 .40 .40 .08 .02
Max 1.06 Max Max Min Max Max Max Max Max Max
Note:
• Fittings made from bar or plate may have 0.35 Max Carbon.
• Fittings made from forgings may have a 0.35 Max Carbon and 0.35 Max Silicon.
• For each reduction of 0.01% below the specified carbon maximum, an increase of 0.06% manganese
above the specified maximum will be perfmitted, up to a maximum of 1.35%.
• The sum of Copper, Nickel Chromium and Molybdenum shall not exceed 1.00%.
• The sum of Chromium and Molybdenum shall not exceep 0.32%.
A234A-00 WBP - Physical Requirements

Marking Symbol
Tensile Yield HBN
JBS 60,000 - 85,000 PSI 35,000 PSI Min 197 Max
Note:
• Elongation: As stated in A234A-00.
PF – 6
Carbon Steel –– Swage Nipples
Line Pipe Swages

❑ Size range 1⁄ 8 - 8 NPS (6 - 200 DN) ❑ End finishes available: current API threads, beveled, square cut
❑ Manufactured from A106 Grade B seamless pipe or hex bar which (for socket-weld), or grooved
is heat treated in accordance with ASTM A234 WPB ❑ Available concentric and eccentric
❑ Choice of raw material dependent upon size and reduction. ❑ 1" (25mm) and smaller are made out of hex bar
❑ Available standard, extra heavy, double extra heavy or ❑ 11 ⁄ 4 " (32mm) and larger are made out of pipe
schedule 160
Size XXS/XXH
Standard XS/XH &
Concentric API Reduced To Length
Pipe Weight Weight Sch. 160
Swage Nipples or O.D. Size Weight
NPS DN in mm NPS DN in mm lbs kg lbs kg lbs kg
1 1 1
⁄4 8 0.540 14 ⁄8 6 2 ⁄4 57 – – – – 0.25 0.11
1
3
⁄8 6 21⁄2 64 – – 0.25 0.11 0.38 0.17
⁄8 10 0.675 17
1 1
⁄4 8 2 ⁄2 64 – – 0.25 0.11 0.38 0.17
1
1
⁄8 6 23⁄4 70 – – 0.33 0.15 0.50 0.23
⁄2 15 0.840 21
1
⁄4 and 3⁄8 8 and 10 23⁄4 70 – – 0.33 0.15 0.50 0.23
1
⁄8 6 3 76 – – 0.50 0.23 0.75 0.34
3 1
⁄4 20 1.050 27 ⁄4 and 3⁄8 8 and 10 3 76 – – 0.50 0.23 0.75 0.34
1
⁄2 15 3 76 – – 0.50 0.23 0.75 0.34
1 1
⁄8 6 3 ⁄2 89 – – 0.66 0.30 1.00 0.45
1
1 25 1.315 33 ⁄4 and 3⁄8 8 and 10 31⁄2 89 – – 0.66 0.30 1.00 0.45
1 3 1
⁄2 and ⁄4 15 and 20 3 ⁄2 89 – – 0.66 0.30 1.00 0.45
1 3
⁄4 and ⁄8 8 and 10 4 102 – – 1.00 0.45 1.5 0.68
11⁄4 32 1.660 42 1
⁄2 and 3⁄4 15 and 20 4 102 – – 1.00 0.45 1.5 0.68
1 25 4 102 – – 1.00 0.45 1.5 0.68
1 3 1
⁄4 and ⁄8 8 and 10 4 ⁄2 114 – – 1.2 0.53 2.0 0.91
1
⁄2 and 3⁄4 15 and 20 41⁄2 114 – – 1.2 0.53 2.0 0.91
11⁄2 40 1.900 48
1
1 25 4 ⁄2 114 – – 1.2 0.53 2.0 0.91
1 1
1 ⁄4 32 4 ⁄2 114 – – 1.2 0.53 2.0 0.91
1
⁄4 and 3⁄8 8 and 10 61⁄2 165 – – 3.0 1.4 4.3 1.9
1 3 1
⁄2 and ⁄4 15 and 20 6 ⁄2 165 – – 3.0 1.4 4.3 1.9
2 50 23⁄8 60 1 25 61⁄2 165 2.0 0.91 2.3 1.1 4.3 1.9
11⁄4 32 61⁄2 165 2.0 0.91 2.3 1.1 4.3 1.9
1 1
1 ⁄2 40 6 ⁄2 165 2.0 0.91 2.3 1.1 4.3 1.9
1
⁄2 and 3⁄4 15 and 20 7 178 – – 3.5 1.6 8.0 3.6
1 25 7 178 3.0 1.4 3.5 1.6 8.0 3.6
1 7 1
2 ⁄2 65 2 ⁄8 73 1 ⁄4 32 7 178 3.0 1.4 3.5 1.6 8.0 3.6
1
1 ⁄2 40 7 178 3.0 1.4 3.5 1.6 8.0 3.6
2 50 7 178 3.0 1.4 3.5 1.6 8.0 3.6
1
⁄2 and 3⁄4 15 and 20 8 203 – – 6.0 2.7 11 5.0
1 25 8 203 4.5 2.0 6.0 2.7 11 5.0
3 80 31⁄2 89 11⁄4 32 8 203 4.5 2.0 6.0 2.7 11 5.0
11⁄2 40 8 203 4.5 2.0 6.0 2.7 11 5.0
1
2 and 2 ⁄2 50 and 65 8 203 4.5 2.0 6.0 2.7 11 5.0
Note: See page PF-6 for certification of raw material and marking.
Select sizes of 1 NPS (25 DN) and smaller swages in XS/XH and Schedule 160 weights All sizes 1 NPS (25 DN) and smaller will be made from hex barstock. Most sizes 11⁄ 4 NPS
available in A106. (32 DN) and larger will be made from pipe, and where pipe is not a practical raw material,
All sizes on this page have been processed in a manner strictly conforming to the require- round barstock will be used. No sacrifice of properties will result from such practice.
ments of ASTM A234 from material fully meeting all requirements of that specification. The
correct marking for swage nipples to denote conformance with this specification is “WPB”.
PF – 7
Carbon Steel –– Swage Nipples
Size XXS/XXH &

Standard XS/XH
Concentric API Reduced to Length Sch. 160
Pipe Weight Weight

1
⁄2 thru 11⁄2 15 thru 40 8 203 5.5 2.5 7.5 3.4 14 6.1
31⁄2 90 4 100
2 thru 3 50 thru 80 8 203 5.5 2.5 7.5 3.4 14 6.1
1
⁄2 and 3⁄4 15 and 20 9 229 – – 10.0 4.5 18 8.2
1 25 9 229 7.5 3.4 10.0 4.5 18 8.2
11⁄4 and 11⁄2 32 and 40 9 229 7.5 3.4 10.0 4.5 18 8.2
1
4 100 4 ⁄2 114
2 50 9 229 7.5 3.4 10.0 4.5 18 8.2
21⁄2 65 9 229 7.5 3.4 10.0 4.5 18 8.2
3 and 31⁄2 80 and 90 9 229 7.5 3.4 10.0 4.5 18 8.2
1 thru 11⁄2 25 thru 40 11 279 12 5.2 17 7.7 33 15
2 and 21⁄2 50 and 65 11 279 12 5.2 17 7.7 33 15

9
5 125 5 ⁄16 140
3 and 31⁄2 80 and 90 11 279 12 5.2 17 7.7 33 15
4 100 11 279 12 5.2 17 7.7 33 15
1 thru 11⁄2 25 thru 40 12 305 17 7.7 25 11 46 21
2 and 21⁄2 50 and 65 12 305 17 7.7 25 11 46 21
6 150 65⁄8 168 3 and 31⁄2 80 and 90 12 305 17 7.7 25 11 46 21
4 100 12 305 17 7.7 25 11 46 21
5 125 12 305 17 7.7 25 11 46 21
2 thru 3 50 thru 80 13 330 29 13 44 20 78 35
8 200 85⁄8 219 4 and 5 100 and 125 13 330 29 13 44 20 78 35
6 150 13 330 29 13 44 20 78 35
Note See page PF-6 for certification of raw material and marking.
PF – 8
Carbon Steel - Swage Nipples
Size XXS/XXH &

Standard XS/XH
Eccentric API Reduced to Length Sch. 160
Pipe Weight Weight

1 1 1
⁄4 8 0.540 14 ⁄8 6 2 ⁄4 57 – – 0.16 0.07 0.25 0.11
1
3
⁄8 6 21⁄2 64 – – 0.25 0.11 0.38 0.17
⁄8 10 0.675 17
1 1
⁄4 8 2 ⁄2 64 – – 0.25 0.11 0.38 0.17
1 1
⁄2 15 0.840 21 ⁄4 and 3⁄8 8 and 10 23⁄4 70 – – 0.33 0.15 0.50 0.23
1 3
⁄4 and ⁄8 8 and 10 3 76 – – 0.50 0.23 0.75 0.34
3
⁄4 20 1.050 27
1
⁄2 15 3 76 – – 0.50 0.23 0.75 0.34
1
⁄4 and 3⁄8 8 and 10 31⁄2 89 – – 0.66 0.30 1.00 0.45
1 25 1.315 33
1 3 1
⁄2 and ⁄4 15 and 20 3 ⁄2 89 – – 0.60 0.27 1.00 0.45
1
⁄2 and 3⁄4 15 and 20 4 102 – – 1.00 0.45 1.5 0.68
11⁄4 32 1.660 42
1 25 4 102 – – 1.00 0.45 1.5 0.68
1
⁄2 and 3⁄4 15 and 20 41⁄2 114 – – 1.2 0.53 2.0 0.91
11⁄2 40 1.900 48 1 25 41⁄2 114 – – 1.2 0.53 2.0 0.91
1 1
1 ⁄4 32 4 ⁄2 114 – – 1.2 0.53 2.0 0.91
1
⁄4 and 3⁄8 8 and 10 61⁄2 165 – – 3.0 1.4 4.3 1.9
1 3 1
⁄2 and ⁄4 15 and 20 6 ⁄2 165 – – 3.0 1.4 4.3 1.9
2 50 23⁄8 60 1 25 61⁄2 165 2.0 0.91 2.3 1.1 4.3 1.9
1 1
1 ⁄4 32 6 ⁄2 165 2.0 0.91 2.3 1.1 4.3 1.9
1 1
1 ⁄2 40 6 ⁄2 165 2.0 0.91 2.3 1.1 4.3 1.9
1 25 7 178 – – 3.5 1.6 8.0 3.6
1
1 ⁄4 32 7 178 3.0 1.4 3.5 1.6 8.0 3.6
21⁄2 65 27⁄8 73
11⁄2 40 7 178 3.0 1.4 3.5 1.6 8.0 3.6
2 50 7 178 – – 3.5 1.6 8.0 3.6
1
⁄2 and 3⁄4 15 and 20 8 203 – – 6.0 2.7 11 5.0
1 25 8 203 4.5 2.0 6.0 2.7 11 5.0
3 80 31⁄2 89 11⁄4 32 8 203 4.5 2.0 6.0 2.7 11 5.0
1
1 ⁄2 40 8 203 4.5 2.0 6.0 2.7 11 5.0
2 and 21⁄2 50 and 65 8 203 4.5 2.0 6.0 2.7 11 5.0
All All
31⁄2 90 4 102 8 203 5.5 2.5 7.5 3.4 14 6.1
reductions reductions
1 25 9 229 7.5 3.4 10.0 4.5 18 8.2
1 1
1 ⁄4 and 1 ⁄2 32 and 40 9 229 7.5 3.4 10.0 4.5 18 8.2
4 100 1
4 ⁄2 114 2 50 9 229 7.5 3.4 10.0 4.5 18 8.2
21⁄2 65 9 229 7.5 3.4 10.0 4.5 18 8.2
1
3 and 3 ⁄2 80 and 90 9 229 7.5 3.4 10.0 4.5 18 8.2
Note See page PF-6 for certification of raw material and marking.
Sizes not shown - P.O.A.
PF – 9
Stainless Steel - Stainless Swages
Stainless & Alloy Steel Sch. 40 , 304 Stainless Steel Sch. 40 , 316 Stainless Steel
Swage Nipples Size Length Size Length
NPS DN in mm NPS DN in mm
1 1 1 1 1 1
⁄4 x ⁄8 8x6 2 ⁄4 57 ⁄4 x ⁄8 8x6 2 ⁄4 57
3
⁄8 x 1⁄4 10 x 8 21⁄2 64 3
⁄8 x 1⁄4 10 x 8 21⁄2 64
1
⁄2 x 1⁄4 15 x 8 23⁄4 70 1
⁄2 x 1⁄4 15 x 8 23⁄4 70
1 3 3 1 3 3
⁄2 x ⁄8 15 x 10 2 ⁄4 70 ⁄2 x ⁄8 15 x 10 2 ⁄4 70
3
⁄4 x 1⁄4 20 x 8 3 76 3
⁄4 x 1⁄4 20 x 8 3 76
3 3 3 3
⁄4 x ⁄8 20 x 10 3 76 ⁄4 x ⁄8 20 x 10 3 76
3 1 3 1
⁄4 x ⁄2 20 x 15 3 76 ⁄4 x ⁄2 20 x 15 3 76
1 x 1⁄4 25 x 8 31⁄2 89 1 x 1⁄4 25 x 8 31⁄2 89
1 1 1 1
1 x ⁄2 25 x 15 3 ⁄2 89 1 x ⁄2 25 x 15 3 ⁄2 89
3 1 3 1
1 x ⁄4 25 x 20 3 ⁄2 89 1 x ⁄4 25 x 20 3 ⁄2 89
11⁄4 x 1⁄2 32 x 15 4 102 11⁄4 x 1⁄2 32 x 15 4 102
11⁄4 x 3⁄4 32 x 20 4 102 11⁄4 x 3⁄4 32 x 20 4 102
1
1 ⁄4 x 1 32 x 25 4 102 11⁄4 x 1 32 x 25 4 102
11⁄2 x 1⁄2 40 x 15 41⁄2 114 11⁄2 x 1⁄2 40 x 15 41⁄2 114
1 3 1 1 3 1
1 ⁄2 x ⁄4 40 x 20 4 ⁄2 114 1 ⁄2 x ⁄4 40 x 20 4 ⁄2 114
11⁄2 x 1 40 x 25 41⁄2 114 11⁄2 x 1 40 x 25 41⁄2 114
1 1 1 1 1 1
1 ⁄2 x 1 ⁄4 40 x 32 4 ⁄2 114 1 ⁄2 x 1 ⁄4 40 x 32 4 ⁄2 114
1 1 1 1
2 x ⁄2 50 x 15 6 ⁄2 165 2 x ⁄2 50 x 15 6 ⁄2 165
2 x 3⁄4 50 x 20 61⁄2 165 2 x 3⁄4 50 x 20 61⁄2 165
1 1
2x1 50 x 25 6 ⁄2 165 2x1 50 x 25 6 ⁄2 165
2 x 11⁄4 50 x 32 61⁄2 165 2 x 11⁄4 50 x 32 61⁄2 165
2 x 11⁄2 50 x 40 61⁄2 165 2 x 11⁄2 50 x 40 61⁄2 165
1 1
2 ⁄2 x 1 65 x 25 7 178 2 ⁄2 x 1 65 x 25 7 178
21⁄2 x 11⁄4 65 x 32 7 178 21⁄2 x 11⁄4 65 x 32 7 178
21⁄2 x 11⁄2 65 x 40 7 178 21⁄2 x 11⁄2 65 x 40 7 178
1 1
2 ⁄2 x 2 65 x 50 7 178 2 ⁄2 x 2 65 x 50 7 178
3x1 80 x 25 8 203 3x1 80 x 25 8 203
3 x 11⁄4 80 x 32 8 203 3 x 11⁄4 80 x 32 8 203
1 1
3 x 1 ⁄2 80 x 40 8 203 3 x 1 ⁄2 80 x 40 8 203
3x2 80 x 50 8 203 3x2 80 x 50 8 203
3 x 21⁄2 80 x 65 8 203 3 x 21⁄2 80 x 65 8 203
4x1 100 x 25 9 229 4x1 100 x 25 9 229
1 1
4 x 1 ⁄4 100 x 32 9 229 4 x 1 ⁄4 100 x 32 9 229
1 1
4 x 1 ⁄2 100 x 40 9 229 4 x 1 ⁄2 100 x 40 9 229
4x2 100 x 50 9 229 4x2 100 x 50 9 229
4 x 21⁄2 100 x 65 9 229 4 x 21⁄2 100 x 65 9 229
4x3 100 x 80 9 229 4x3 100 x 80 9 229
4 x 31⁄2 100 x 90 9 229 4 x 31⁄2 100 x 90 9 229
Note: See page PF-6 for certification of raw material and marking. Options:
Other types and sizes available on application. ❑ E.L.C. Grades of Stainless
For other alloy raw material, Consult factory. ❑ Eccentrics
Mill test reports furnished upon request only.
❑ Schedule 10 - 80
❑ Schedule 160 & XXS/XXH
PF – 10
Carbon Steel - Bull Plugs
Size XXS/XXH &

Standard XS/XH Solid
Carbon Steel Length Sch.160
Pipe API or O.D. Weight Weight Weight
Bull Plugs Weight
NPS DN in mm in mm lbs kg lbs kg lbs kg lbs kg
1
⁄8 6 0.405 10 2 51 – – 0.10 0.05 0.20 0.09 0.40 0.18
1
⁄4 8 0.540 14 2 51 – – 0.11 0.05 0.20 0.09 0.40 0.18
3 1
⁄8 10 0.675 17 2 ⁄4 57 – – 0.14 0.06 0.33 0.15 0.28 0.13
1 1
⁄2 15 0.840 21 2 ⁄2 64 – – 0.33 0.15 0.50 0.23 0.50 0.23
3
⁄4 20 1.050 27 23⁄4 70 – – 0.50 0.23 0.80 0.36 0.75 0.34
1 25 1.315 33 3 76 – – 0.66 0.30 1.4 0.63 1.00 0.45
11⁄4 32 1.660 42 31⁄4 83 – – 1.00 0.45 2.3 1.0 1.5 0.68
11⁄2 40 1.900 48 31⁄2 89 – – 1.2 0.53 3.0 1.4 2.0 0.91
3
2 50 2 ⁄8 60 4 102 2.3 1.0 2.5 1.1 5.0 2.3 3.5 1.6
21⁄2 65 27⁄8 73 5 127 3.0 1.4 3.5 1.6 – – 8.0 3.6
1
3 80 3 ⁄2 89 6 152 4.5 2.0 6.0 2.7 – – 11 5.0
1 1
3 ⁄2 90 4 102 6 ⁄2 165 5.5 2.5 7.5 3.4 – – 14 6.1
1
4 100 4 ⁄2 114 7 178 7.5 3.4 10.0 4.5 – – 18 8.2
9 1
5 125 5 ⁄16 141 8 ⁄2 216 13 5.7 17 7.7 – – 33 15
5
6 150 6 ⁄8 168 10 254 17 7.7 25 11 – – 46 21
5
8 200 8 ⁄8 219 11 279 29 13 44 20 – – 78 35
Solid Refinery Plugs Size Length

Black (non-plated) Carbon Steel NPS DN in mm
1
⁄8 6 3 76
1
⁄4 8 3 76
3
⁄8 10 3 76
1
⁄2 15 3 76
3
⁄4 20 3 76
1 25 3 76
1
1 ⁄4 32 3 76
1
1 ⁄2 40 3 76
2 50 3 76
Smith solid black refinery plugs have been especially designed for refinery use. The body length leaves sufficient length for easy wrench application.
Material conforms to ASTM-A 234 Grade WPB.
LINE PIPE BULL PLUGS ❑ Bull plugs available in standard, extra heavy, double extra heavy,
❑ Nominal Pipe Size range 1⁄ 8 - 8 (6 - 200 DN) schedule 160 or solid
❑ Nominal Pipe Size 2 (50 DN) and smaller bull plugs ❑ All Smith bull plugs can be tapped
manufactured out of bar which is heat treated in accordance ❑ End finishes available: current API threads, beveled for weld,
with ASTM A234 WPB square cut (socket-weld) or grooved
❑ Nominal Pipe Size 21⁄ 2 - 8 (65 - 200 DN) bull plugs manufactured
out of A106 Grade B seamless pipe using J.B. Smith’s unique
spinning process which insures uniform wall thickness
PF – 11
Oil Country Fittings
Current API Thread Standards
Current API Thread Standards

Size O.D.
Pipe Tubing & Casing
NPS DN in mm
3
⁄4 20 1.050 27 14 –
3
⁄4 EUE 20 1.050 27 – 10 Rd.
1
1 25 1.315 33 11 ⁄2 10 Rd.
1 EUE 25 1.315 33 – 10 Rd.
1 1
1 ⁄4 32 1.660 42 11 ⁄2 10 Rd.
1
1 ⁄4 EUE 32 1.660 42 – 10 Rd.
1 1
1 ⁄2 40 1.900 48 11 ⁄2 10 Rd.
1
1 ⁄2 EUE 40 1.900 48 – 10 Rd.
3 1
2 50 2 ⁄8 60 11 ⁄2 10 Rd.
2 EUE 50 23⁄8 60 – 8 Rd.
21⁄2 65 27⁄8 73 8V 10 Rd.
21⁄2 EUE 65 27⁄8 73 – 8 Rd.

3 80 31⁄2 89 8V 10 Rd.
3 EUE 80 31⁄2 89 – 8 Rd.
31⁄2 90 4 102 8V 8 Rd.
31⁄2 EUE 90 4 102 8V 8 Rd.

4 100 41⁄2 114 8V 8 Rd.
1
4 EUE 100 4 ⁄2 114 – 8 Rd.
– – 5 127 – 8 Rd.
1
– – 5 ⁄2 140 – 8 Rd.
9
5 125 5 ⁄16 141 8V –
– – 6 152 – 8 Rd.
5
6 150 6 ⁄8 168 8V 8 Rd.
– – 7 178 – 8 Rd.
5
– – 7 ⁄8 194 – 8 Rd.
5
8 200 8 ⁄8 219 8V 8 Rd.
5
– – 9 ⁄8 244 – 8 Rd.
3
10 250 10 ⁄4 273 8V 8 Rd.
3
– – 11 ⁄4 298 – 8 Rd.
3
12 300 12 ⁄4 324 8V –
3
– – 13 ⁄8 340 – 8 Rd.
– – 14 356 8V –
– – 16 406 8V 8 Rd.
– – 18 457 8V –
– – 20 508 8V 8 Rd.
PF – 12
Tubing Swages & Casing Swages
TUBING SWAGES
❑ Nominal Sizes 1-4 (25 - 100 DN) upset and non-upset ends ❑ Wall thicknesses available are standard through double extra heavy
tubing swages available with any combination of current ❑ For different grades of material (stainless, brass, etc.) and different
API threads (8 round, 10 round, 111⁄ 2v, 8v, etc.) and are stock threads, consult factory
items in J-55, K-55, N-80 and L-80) ❑ Thread types are color-coded for easy identification
Swage Nipples – Oil Country
Large End Upset Standard XS/XH XXS/XXH

Size Pipe O.D. Reduced to Size Length
Reduced to Regular Weight Weight Weight
or Upset NPS DN in mm NPS DN in mm lbs kg lbs kg lbs kg
3 1
1 25 1.315 33 ⁄4 20 3 ⁄2 89 0.66 0.30 0.66 0.30 – –
1 3
1 ⁄4 32 1.660 42 ⁄4–1 20–25 4 102 1.00 0.45 1.00 0.45 – –
11⁄2 40 1.900 48 3
⁄4–11⁄4 20–32 41⁄2 114 1.3 0.57 1.3 0.57 – –
1
⁄4–1⁄2–3⁄4 8–15–20 8 203 2.5 1.1 4.0 1.8 6.0 2.7
2 50 23⁄8 60 1–11⁄4–11⁄2 25–32–40 8 203 2.5 1.1 4.0 1.8 6.0 2.7
21⁄16 O.D. 52 O.D. 8 203 2.5 1.1 4.0 1.8 6.0 2.7
1 1
1–1 ⁄4–1 ⁄2 25–32–40 8 203 5.0 2.3 6.0 2.7 10.0 4.5
21⁄2 65 27⁄8 73
2 50 8 203 6.0 2.7 6.0 2.7 10.0 4.5
1–1⁄4–11⁄2 25–8–40 8 203 7.5 3.4 9.0 4.1 14 6.4
3 80 31⁄2 89
1
2–2 ⁄2 50–65 8 203 7.5 3.4 9.0 4.1 14 6.4
1 1
1– ⁄4–1 ⁄2 25–8–40 9 229 11 5.0 14 6.4 23 10
4 100 41⁄2 114 2–21⁄2 50–65 9 229 11 5.0 14 6.4 23 10
1
3–3 ⁄2 80–90 9 229 11 5.0 14 6.4 23 10
❑ Swage Nipples non-upset on large end are made from J-55, K-55, N-80 or the most appropriate material available.
❑ Swage Nipples upset on large end are made from J-55 unless otherwise specified
Swage Nipples – Oil Country
Large End Standard XS/XH XXS/XXH

Size Pipe O.D. Reduced to Size Length
Non-Upset Weight Weight Weight
Reduced to Upset NPS DN in mm NPS DN in mm lbs kg lbs kg lbs kg
3 1
1 25 1.315 33 ⁄4 20 3 ⁄2 89 0.66 0.30 0.66 0.30 – –
1 3
1 ⁄4 32 1.660 42 ⁄4–1 20–25 4 102 1.00 0.45 1.00 0.45 – –
11⁄2 40 1.900 48 3
⁄4–11⁄4 20–32 41⁄2 114 1.3 0.57 1.3 0.57 – –
3 1
⁄4 20 6 ⁄2 165 2.5 1.1 3.5 1.6 5.0 2.3
2 50 23⁄8 60
1–11⁄4–11⁄2 25–32–40 61⁄2 165 2.5 1.1 3.5 1.6 5.0 2.3
1 1
1–1 ⁄4–1 ⁄2 25–32–40 7 178 4.0 1.8 6.0 2.7 9.0 4.1
21⁄2 65 27⁄8 73
2 50 7 178 4.0 1.8 6.0 2.7 9.0 4.1
1–11⁄4–11⁄2 25–32–40 8 203 6.0 2.7 9.0 4.1 12 5.4
3 80 31⁄2 89
2–21⁄2 50–65 8 203 6.0 2.7 9.0 4.1 12 5.4
1 1
1–1 ⁄4–1 ⁄2 25–32–40 9 229 8.0 3.6 12 5.4 20 9.1
41⁄2 114 2–21⁄2 50–65 9 229 8.0 3.6 12 5.4 20 9.1
4 100 3–3 ⁄2 1
80–90 9 229 8.0 3.6 12 5.4 20 9.1
51⁄2 140 2-3 50 11 279 13 5.7 17 7.7 33 15
7 178 2-3 50 12 305 17 7.7 25 11 50 23
❑ Swage Nipples non-upset on large end are made from J-55, K-55, N-80 or the most appropriate material available.
❑ Swage Nipples upset on large end are made from J-55 unless otherwise specified.
PF – 13
Tubing Swages & Casing Swages
Size Standard XS/XH XXS/XXH

Swage Nipples Oil Length
Country Tubing & Pipe O.D. Reduced to Weight Weight Weight
Casing non EUE ends
1 3 1
1 25 1.315 33 ⁄4 - ⁄4 8 - 20 3 ⁄2 89 0.66 0.30 0.66 0.30 1.00 0.45
1
⁄4 - 1⁄2 8 - 15 4 102 1.00 0.45 1.00 0.45 1.5 0.68
11⁄4 32 1.660 42
3
⁄4 & 1 20 & 25 4 102 1.00 0.45 1.00 0.45 1.5 0.68
1 3 1
⁄4 - ⁄4 8 - 20 4 ⁄2 114 1.2 0.53 – – 2.0 0.91
11⁄2 40 1.900 48
1 & 11⁄4 25 & 32 41⁄2 114 1.2 0.53 1.00 0.45 2.0 0.91
1 3 1
⁄4 - ⁄4 8 - 20 6 ⁄2 165 2.5 1.1 3.0 1.4 4.3 1.9
2 50 23⁄8 60
1 - 2 O.D. 25 - 50 O.D. 61⁄2 165 2.0 0.91 2.3 1.1 4.3 1.9
1
⁄4 - 3⁄4 8 - .75 7 178 3.0 1.4 3.5 1.6 8.0 3.6
1 7 1
2 ⁄2 65 2 ⁄8 73 1 - 1 ⁄2 25 - 40 7 178 3.0 1.4 3.5 1.6 8.0 3.6
2 & 21⁄16 50 - 52 7 178 3.0 1.4 3.5 1.6 8.0 3.6
1
1 - 1 ⁄2 25 - 40 8 203 4.5 2.0 6.0 2.7 11 5.0
3 80 31⁄2 89
2 & 21⁄2 50 - 65 8 203 4.5 2.0 6.0 2.7 11 5.0
1 - 11⁄2 25 - 40 9 229 7.0 3.2 10.0 4.5 18 8.2
4 100 41⁄2 114
2 - 4 O.D. 50 -100 O.D. 9 229 7.5 3.4 10.0 4.5 18 8.2
1 - 11⁄2 25 - 40 10 254 9.5 4.3 15 6.8 24 11
5 127
2 - 41⁄2 O.D. 50 - 100 O.D. 10 254 9.5 4.3 15 6.8 24 11
1
1 - 1 ⁄2 25 - 40 11 279 13 5.7 17 7.7 33 15
51⁄2 140 2 & 21⁄2 50 & 65 11 279 13 5.7 17 7.7 33 15
3 - 5O.D. 80 - 125 O.D. 11 279 13 5.7 17 7.7 33 15
1
1 - 1 ⁄2 25 - 40 12 305 17 7.7 25 11 46 21
2 & 21⁄2 50 & 65 12 305 17 7.7 25 11 46 21
65⁄8 168
3 - 4 O.D. 80 - 100 O.D. 12 305 17 7.7 25 11 46 21
4 - 6 O.D. 100 - 150 O.D. 12 305 17 7.7 25 11 46 21
1
1 - 1 ⁄2 25 - 40 12 305 17 7.7 25 11 – –
2 - 21⁄2 50 - 65 12 305 17 7.7 25 11 – –
7 178
3 - 5 O.D. 80 - 125 O.D. 12 305 17 7.7 25 11 – –
1
5 ⁄2 O.D. & 6 O.D. 140 O.D. & 150 O.D. 12 305 17 7.7 25 11 – –
2-3 5 - 750 13 330 24 11 32 15 – –
75⁄8 194 4 O.D. - 6 O.D. 100 O.D. - 150 O.D. 13 330 24 11 32 15 – –
65⁄8 O.D. - 7 O.D. 168 O.D. - 175 O.D. 13 330 24 11 32 15 – –
2-3 50 - 75 13 330 29 13 44 20 – –
5
8 ⁄8 219 4 - 6 O.D. 100 - 150 O.D. 13 330 29 13 44 20
65⁄8 O.D. & 7 5⁄8 O.D. 168 O.D. - 194 O.D. 13 330 29 13 44 20 – –
2-3 50 - 75 14 356 38 17 48 22 – –
95⁄8 244 4 - 6 O.D. 100 - 150 O.D. 14 356 38 17 48 22 – –
65⁄8 O.D. & 85⁄8 O.D. 168 O.D. - 219 O.D. 14 356 38 17 48 22 – –
2-3 50 - 75 15 381 48 22 68 31 – –
4 - 6 O.D. 100 - 150 O.D. 15 381 48 22 68 31 – –
103⁄4 273
65⁄8 O.D - 75⁄8 O.D. 168 O.D. - 194 O.D. 15 381 48 22 68 31 – –
5 5
8 ⁄8 O.D. & 9 ⁄8 O.D. 219 O.D. - 245 O.D. 15 381 48 22 68 31 – –
❑ All swage nipples on this page are made from J-55, K-55, N-80 or the most appropriate material available
❑ Casing threads (8 Rd.) on one end with any thread or finish (beveled) on the other end
❑ Also includes casing sizes where no thread is specified
PF – 14
Bull Plugs
Size XXS/XXH
Standard XS/XH
Tubing Length & Sch. 160
Pipe API or O.D. Weight Weight
Bull Plugs Weight
NPS DN in mm in mm lbs kg lbs kg lbs kg
3
⁄4 EUE 20 3 76 1.5 0.68 0.50 0.23 — —
1 25 1.315 33 3 76 1.5 0.68 0.66 0.30 — —
1 EUE 25 3 76 1.5 0.68 — — — —
11⁄4 32 1.660 42 31⁄4 83 1.5 0.68 1.00 0.45 — —
1 1
1 ⁄4 EUE 32 3 ⁄4 83 1.5 0.68 — — — —
11⁄2 40 1.900 48 31⁄2 89 1.5 0.68 1.1 0.48 — —
11⁄2 EUE 40 31⁄2 89 2.0 0.91 2.3 1.0 — —
3
2 50 2 ⁄8 60 4 102 2.0 0.91 3.0 1.4 4.3 1.9
2 EUE 50 5 127 3.5 1.6 4.0 1.8 9.0 4.1
1 7
2 ⁄2 65 2 ⁄8 73 5 127 3.0 1.4 3.5 1.6 8.0 3.6
21⁄2 EUE 65 51⁄2 140 4.3 1.9 6.0 2.7 14 6.4
1
3 80 3 ⁄2 89 6 152 4.5 2.0 5.0 2.3 11 5.0
3 EUE 80 61⁄2 165 10.0 4.5 15 6.8 25 11
XXS/XXH &
API or Standard XS/XH
Casing Length Sch. 160
O.D. Weight Weight
Bull Plugs Weight
in mm in mm lbs kg lbs kg lbs kg
1
4 ⁄2 114 7 178 7.5 3.4 10.0 4.5 18 8.2
5 127 8 203 9.5 4.3 15 6.8 24 11
1 1
5 ⁄2 140 8 ⁄2 216 13 5.7 17 7.7 33 15
5
6 ⁄8 168 10 254 17 7.7 25 11 46 21
7 178 10 254 17 7.7 25 11 50 23
5
7 ⁄8 194 11 279 24 11 32 15 53 24
85⁄8 219 11 279 29 13 44 20 78 35
5
9 ⁄8 244 12 305 36 16 47 21 76 34
3
10 ⁄4 273 13 330 41 18 56 25 85 39
Std. bull plugs listed above are made from J-55 (or better).
Such items in XS and XXS are made from J-55, K-55, N-80 or the most appropriate material available.
CASING BULL PLUGS

❑ 41⁄ 2” O.D. - 10 3 ⁄ 4 ” O.D. (114 O.D. - 273 O.D. DN) casing bull plugs ❑ Casing bull plugs available in standard, extra heavy or double extra
available with all current API threads or beveled for welding heavy, and are manufactured from J-55, K-55, N-80 or L-80
PF – 15
Adapter Nipples
ADAPTER NIPPLES
Bell Nipple
❑ J.B. Smith manufactures a full line of adapter nipples in sizes
1" NPS (25 DN) through 12" NPS (300 DN) from seamless O.D. Size Weight
A106 pipe.
NPS DN lbs kg
❑ Adapter Nipples available in threaded, beveled, grooved and
1
virtually all combinations of these end connections. 4 ⁄2 114 4.5 2.0
❑ Nipples manufactured in schedule 40, schedule 80, schedule 160 51⁄2 140 9.0 4.1
and double extra heavy wall thickness 7 175 13 6.0
5
❑ Full Traceability and mill certification available upon request at 8 ⁄8 219 15 6.8
time of order
Adapter Nipples Seamless Schedule 40 TUBING NIPPLES

Size Weight ❑ Nominal Pipe Size 1” - 4” (25 - 100 DN) upset and non-upset ends
NPS DN lbs/ft kg ❑ Lengths are 4” - 18” (102mm - 457mm)

3
⁄4 20 — — ❑ Tubing nipples available with any combination of current
1 25 — — API threads (8 round, 10 round, 111⁄ 2v, etc.)
11⁄4 32 — — and are stock items in J-55, K-55, N-80 and L-80
11⁄2 40 — — ❑ Wall thicknesses available: standard through double extra heavy
2 50 3.6 1.7
❑ For a different grade of material (stainless, brass, etc.) and
21⁄2 65 5.8 2.6
different threads, consult factory
3 80 7.6 3.4
4 100 11 4.9
5 125 15 6.6
6 150 19 8.6
8 200 29 13
10 250 40 18
12 300 50 22
Tubing Nipples Size Tubing Nipples Size

End Connection End Connection
standard Weight NPS DN Extra Heavy Weight NPS DN
18” and shorter Upset A.P.I. Thds, One or Both Ends 18” and shorter Upset A.P.I. Thds, One or Both Ends
1 25 1 25
upset and non-upset Non-upset (Regular) upset and non-upset Non-upset (Regular)
Upset A.P.I. Thds, One or Both Ends Upset A.P.I. Thds, One or Both Ends
11⁄4 32 11⁄4 32
Non-upset (Regular) Non-upset (Regular)
11⁄2 40 11⁄2 40
2 50 2 50
21⁄2 65 21⁄2 65
3 80 3 80
4 100 4 100
PF – 16
Casing Nipples
Oil Country Size O.D. Weight

Steel Grade
Casing Nipples NPS DN lbs kg
11 4.8 K
41⁄2 114
12 5.3 K-N-P
12 5.2 K
13 5.9 K
5 125
15 6.8 K-N-P
18 8.2 N-P
14 6.4 K
16 7.0 K
51⁄2 140
17 7.7 K-N-P
20 9.1 N-P
20 9.1 K
65⁄8 168 24 11 K-N-P
28 13 N-P
20 9.1 K
23 10 K-N
7 175
26 12 K-N-P
29 13 N-P
26 12 K-N
75⁄8 194
30 13 N-P
24 11 K
32 15 K
85⁄8 219 36 16 K-N
44 20 N-P
49 22 N-P
36 16 K
40 18 K-N
95⁄8 245
44 20 N-P
47 21 N-P
41 18 K
103⁄4 273 46 21 K
56 25 N-P
113⁄4 298 60 27 K
55 25 K
61 28 K
133⁄8 340
68 31 K
72 33 K
75 34 K
16 400
84 38 K
PF – 17
Oil Country Couplings
Casing Couplings
Length of
API Casing Couplings Casing O.D. Weight/100 Round Thread
Short Thread Coupling
NPS Dn lbs kg in mm
41⁄2 114 805 365 61⁄4 159
1
5 125 1018 462 6 ⁄2 165
51⁄2 140 1144 519 63⁄4 171

5 1
6 ⁄8 168 1997 906 7 ⁄4 184
7 175 1834 832 71⁄4 184

5 1
7 ⁄8 194 2693 1222 7 ⁄2 191
85⁄8 219 3558 1614 73⁄4 197

5 3
9 ⁄8 144 3951 1792 7 ⁄4 197
103⁄4 273 4553 2065 8 203

3
11 ⁄4 298 – – 8 203
133⁄8 340 5623 2551 8 203
16 400 7898 3582 9 229
20 500 9500 4309 9 229
Length of
API Casing Couplings Casing O.D. Weight /100
Coupling
Long Thread
NPS DN lbs kg in mm
41⁄2 114 907 411 7 178
3
5 125 1256 570 7 ⁄4 197
51⁄2 140 1403 636 8 203

5 3
6 ⁄8 168 1829 830 8 ⁄4 222
7 175 2367 1074 9 229

5 1
7 ⁄8 194 3423 1553 9 ⁄4 235
85⁄8 219 4748 2154 10 254

5 1
9 ⁄8 244 5577 2530 10 ⁄2 267
103⁄4 273 6202 2813 101⁄2 267

3 1
13 ⁄8 340 7663 3476 10 ⁄2 267
PF – 18
Forged Steel Fittings
Materials Dimensions
The steel for Anvil Forged Carbon Steel Fittings consists ASME B16.11, unless otherwise noted
of forging, bars, seamless pipe or tubes which conform
Threads
to the requirements for melting process, chemical com-
ASME 1.20.1
position and mechanical properties of ASTM A105.
Design Basis
ASME B16.11 - Forged fittings, socket-weld and threaded
PF – 19
Class 2000 Threaded
NPS --> 1
⁄8 1
⁄4 3
⁄8 1
⁄2 3
⁄4 1 11⁄ 4 11⁄ 2 2 21⁄ 2 3 4
DN --> 6 8 10 15 20 25 32 40 50 65 80 100
90° Elbows: (in) 0.97* 0.97* 0.97 1.12 1.31 1.50 1.75 2.00 2.38 3.00 3.38 4.19
Figure 2101 A
(mm) 25 25 25 28 33 38 44 51 60 76 86 106
A
(in) 1.00* 1.00* 1.00 1.31 1.50 1.81 2.19 2.44 2.97 3.62 4.31 5.75
H H
(mm) 25 25 25 33 38 46 56 62 75 92 109 146
Wt./100 (lbs) 31 31 31 50 69 113 158 200 350 650 1100 2275
(kg) 14 14 14 23 31 51 72 91 159 295 499 1032

45° Elbows: (in) 0.75* 0.75* 0.75 0.88 1.00 1.12 1.31 1.38 1.69 2.06 2.50 3.12
Figure 2102 C
(mm) 19 19 19 22 25 28 33 35 43 52 64 79
C
1.00* 1.00* 1.00 1.31 1.50 1.81 2.19 2.44 2.97 3.62 4.31 5.75
H
(in)
H
(mm) 25 25 25 33 38 46 56 62 75 92 109 146
Wt./100 (lbs) 25 25 25 44 63 94 138 163 269 775 1131 1913
(kg) 11 11 11 20 29 43 63 74 122 352 513 868

Tees: (in) 0.97* 0.97* 0.97 1.12 1.31 1.50 1.75 2.00 2.38 3.00 3.38 4.19
Figure 2103 A
(mm) 25 25 25 28 33 38 44 51 60 76 86 106
(in) 1.00* 1.00* 1.00 1.31 1.50 1.81 2.19 2.44 2.97 3.62 4.31 5.75
H
H
(mm) 25 25 25 33 38 46 56 62 75 92 109 146
A
Wt./100 (lbs) 31 31 31 69 94 144 200 275 463 869 1319 2725
(kg) 14 14 14 31 43 65 91 125 210 394 598 1236

Crosses: (in) 0.97* 0.97* 0.97 1.12 1.31 1.50 1.75 2.00 2.38 3.00 3.38 4.19
Figure 2104 A
(mm) 25 25 25 28 33 38 44 51 60 76 86 106
(in) 1.00* 1.00* 1.00 1.31 1.50 1.81 2.19 2.44 2.97 3.62 4.31 5.75
H H
(mm) 25 25 25 33 38 46 56 62 75 92 109 146
A
Wt./100 (lbs) 50 50 50 88 113 169 250 319 525 1644 1950 3269
(kg) 23 23 23 40 51 77 113 145 238 746 885 1483
*Larger than ASME B16.11 dimension.
PF – 20
Class 3000 Threaded
NPS --> 1
⁄8 1
⁄4 3
⁄8 1
⁄2 3
⁄4 1 11⁄ 4 11⁄ 2 2 21⁄ 2 3 4
DN --> 6 8 10 15 20 25 32 40 50 65 80 100
90° Elbows: (in) 0.97* 0.97 1.12 1.31 1.50 1.75 2.00 2.38 2.50 3.25 3.75 4.50
Figure 2111 A
(mm) 25 25 28 33 38 44 51 60 64 83 95 114
A
(in) 1.00* 1.00 1.31 1.50 1.81 2.19 2.44 2.97 3.31 4.00 4.75 6.00
H
H (mm) 25 25 33 38 46 56 62 75 84 102 121 152
Wt./100 (lbs) 38 38 63 88 138 225 260 490 519 1050 1444 3038
(kg) 17 17 29 40 63 102 118 222 235 476 655 1378
45° Elbows: (in) 0.75* 0.75 0.88 1.00 1.12 1.31 1.38 1.69 1.72 2.06 2.50 3.12
Figure 2112 C
(mm) 19 19 22 25 28 33 35 43 44 52 64 79
H (in) 1.00* 1.00 1.31 1.50 1.81 2.19 2.44 2.97 3.31 4.00 4.75 6.00
C
H
H
(mm) 25 25 33 38 46 56 62 75 84 102 121 152
Wt./100 (lbs) 25 25 52 68 119 188 213 400 440 738 1178 1906
(kg) 11 11 24 31 54 85 97 181 200 335 534 865
Tees: (in) 0.97* 0.97 1.12 1.31 1.50 1.75 2.00 2.38 2.50 3.25 3.75 4.50
Figure 2114 A
(mm) 25 25 28 33 38 44 51 60 64 83 95 114
(in) 1.00* 1.00 1.31 1.50 1.81 2.19 2.44 2.97 3.31 4.00 4.75 6.00
H H
(mm) 25 25 33 38 46 56 62 75 84 102 121 152
A
Wt./100 (lbs) 38 38 81 119 188 310 350 640 686 1313 2038 3950
(kg) 17 17 37 54 85 141 159 290 311 596 924 1792
Crosses: (in) 0.97* 0.97 1.12 1.31 1.50 1.75 2.00 2.38 2.50 3.25 3.75 4.50
Figure 2115 A
(mm) 25 25 28 33 38 44 51 60 64 83 95 114
(in) 1.00* 1.00 1.31 1.50 1.81 2.19 2.44 2.97 3.31 4.00 4.75 6.00
H H
(mm) 25 25 33 38 46 56 62 75 84 102 121 152
A Wt./100 (lbs) 38 38 100 150 250 356 413 650 813 1675 1975 3200
(kg) 17 17 45 68 113 161 187 295 369 760 896 1451
Street Elbows: (in) 0.97 0.97 1.12 1.31 1.50 1.75 2.00 2.38 2.50 3.25 3.75 4.50
Figure 2113 A
(mm) 25 25 28 33 38 44 51 60 64 83 95 114
H
(in) 1.25 1.25 1.50 1.69 1.94 2.31 2.69 2.81 3.38 – – –
A G
(mm) 32 32 38 43 49 59 68 71 86 – – –
G (in) 1.00 1.00 1.31 1.50 1.81 2.19 2.44 2.97 3.31 4.00 4.75 6.00
H
(mm) 25 25 33 38 46 56 62 75 84 102 121 152
Wt./100 (lbs) 25 25 38 55 88 144 250 425 519 – – –
(kg) 11 11 17 25 40 65 113 193 235 – – –
PF – 21
Class 3000 Threaded
NPS --> 1
⁄8 1
⁄4 3
⁄8 1
⁄2 3
⁄4 1 11⁄ 4 11⁄ 2 2 21⁄ 2 3 4
DN --> 6 8 10 15 20 25 32 40 50 65 75 100
Laterals: (in) – 1.88 2.12 2.56 3.00 3.50 3.94 4.75 – – – –
Figure 2116 A
(mm) – 48 54 65 76 89 100 121 – – – –
(in) – 1.06 1.31 1.50 1.81 2.19 2.44 2.97 – – – –
H
A
(mm) – 27 33 38 46 56 62 75 – – – –
H (in) – 0.81 0.88 1.00 1.12 1.31 1.44 1.68 – – – –
K
A K (mm) – 21 22 25 28 33 37 43 – – – –
Wt./100 (lbs) – – – 175 275 463 550 1081 – – – –
(kg) – – – 79 125 210 249 490 – – – –
Couplings: (in) 0.75* 0.75 0.88 1.12 1.38 1.75 2.25 2.50 3.00 3.62 4.25 5.50
Figure 2117 D
(mm) 19 19 22 28 35 44 57 64 76 92 108 140
(in) 1.25 1.38 1.50 1.88 2.00 2.38 2.62 3.12 3.38 3.62 4.25 4.75
D W
(kg) 0.57 0.63 0.68 0.85 0.91 1.1 1.2 1.4 1.5 1.6 1.9 2.2
W Wt./100 (lbs) 12 10.0 13 29 42 84 156 211 300 460 650 1225
(kg) 5.4 4.5 5.9 13 19 38 71 96 136 209 295 556
Half Couplings: (in) 0.75* 0.75 0.88 1.12 1.38 1.75 2.25 2.50 3.00 3.62 4.25 5.50
Figure 2119 D
(mm) 19 19 22 28 35 44 57 64 76 92 108 140
(in) 0.62 0.69 0.75 0.94 1.00 1.19 1.31 1.56 1.69 1.81 2.13 2.38
D W/2
(mm) 16 18 19 24 25 30 33 40 43 46 54 60
W⁄2 Wt./100 (lbs) 5.0 4.0 6.0 13 18 38 72 99 139 215 306 580
(kg) 2.3 1.8 2.7 5.9 8.2 17 33 45 63 98 139 263
Reducing (in) 0.75* 0.75 0.88 1.12 1.38 1.75 2.25 2.50 3.00 3.62 4.25 5.50
Couplings: D
Figure 2118 (mm) 19 19 22 28 35 44 57 64 76 92 108 140
(in) – 1.38 1.50 1.88 2.00 2.38 2.62 3.12 3.38 3.62 4.25 4.75
W
D (mm) – 35 38 48 51 60 67 79 86 92 108 121
1 1 1 1 1 1 1 1 3 3
NPS – ⁄8 ⁄8 ⁄8 ⁄8 ⁄8 ⁄4 ⁄4 ⁄4 ⁄4 ⁄4 11⁄2
W
(DN) – 6 6 6 6 6 8 8 8 20 20 40
Wt./100 (lbs) – 10.0 13 29 42 84 156 211 300 460 650 1225
(kg) – 4.5 5.9 13 19 38 71 96 136 209 295 556
Pipe Caps: (in) 0.75* 0.75 0.88 1.12 1.38 1.75 2.25 2.50 3.00 3.62 4.25 5.50
Figure 2120 D
(mm) 19 19 22 28 35 44 57 64 76 92 108 140
(in) 0.75 1.00 1.00 1.25 1.44 1.62 1.75 1.75 1.88 2.38 2.56 2.69
D P
(mm) 19 25 25 32 37 41 44 44 48 60 65 68
P Wt./100 (lbs) 6.0 9.0 13 25 41 75 125 150 260 500 850 1300
(kg) 2.7 4.1 5.9 11 19 34 57 68 118 227 386 590
PF – 22
Class 6000 Threaded
NPS --> 1
⁄8 1
⁄4 3
⁄8 1
⁄2 3
⁄4 1 11⁄ 4 11⁄ 2 2 21⁄ 2 3 4
DN --> 6 8 10 15 20 25 32 40 50 65 75 100
90° Elbows: (in) 0.97 1.12 1.31 1.50 1.75 2.00 2.38 2.50 3.25 3.75 4.19 4.50
Figure 2131 A
(mm) 25 28 33 38 44 51 60 64 83 95 106 114
A
(in) 1.00 1.31 1.50 1.81 2.19 2.44 2.97 3.31 4.00 4.75 5.75 6.00
H H
(mm) 25 33 38 46 56 62 75 84 102 121 146 152
Wt./100 (lbs) 25 63 106 163 250 325 650 725 1325 2088 3456 –
(kg) 11 29 48 74 113 147 295 329 601 947 1568 –

45° Elbows: (in) 0.75 0.88 1.00 1.12 1.31 1.38 1.69 1.72 2.06 2.50 3.12 3.12
Figure 2132 C
(mm) 19 22 25 28 33 35 43 44 52 64 79 79
C
(in) 1.00 1.31 1.50 1.81 2.19 2.44 2.97 3.31 4.00 4.75 5.75 6.00
H
H
(mm) 25 33 38 46 56 62 75 84 102 121 146 152
Wt./100 (lbs) 25 59 88 144 219 269 469 575 950 1500 3056 –
(kg) 11 27 40 65 99 122 213 261 431 680 1386 –

Tees: (in) 0.97 1.12 1.31 1.50 1.75 2.00 2.38 2.50 3.25 3.75 4.19 4.50
Figure 2134 A
(mm) 25 28 33 38 44 51 60 64 83 95 106 114
(in) 1.00 1.31 1.50 1.81 2.19 2.44 2.97 3.31 4.00 4.75 5.75 6.00
H H
(mm) 25 33 38 46 56 62 75 84 102 121 146 152
A
Wt./100 (lbs) 50 100 138 213 363 463 763 963 1888 2806 4563 –
(kg) 23 45 63 97 165 210 346 437 856 1273 2070 –

Crosses: (in) 0.97 1.12 1.31 1.50 1.75 2.00 2.38 2.50 3.25 3.75 4.19 –
Figure 2135 A
(mm) 25 28 33 38 44 51 60 64 83 95 106 –
(in) 1.00 1.31 1.50 1.81 2.19 2.44 2.97 3.31 4.00 4.75 5.75 –
H H
(mm) 25 33 38 46 56 62 75 84 102 121 146 –
A Wt./100 (lbs) 56 119 150 275 431 563 1075 1150 2219 2750 5400 –
(kg) 25 54 68 125 195 255 488 522 1007 1247 2449 –

Street Elbows: (in) – 1.00 1.12 1.38 1.75 2.00 2.12 2.50 – – – –
Figure 2133 A
(mm) – 25 28 35 44 51 54 64 – – – –
H
(in) – 1.50 1.63 1.88 2.25 2.62 2.81 3.31 – – – –
A G
(mm) – 38 41 48 57 67 71 84 – – – –
G
(in) – 1.25 1.50 1.75 2.00 2.44 2.75 3.31 – – – –
H
(mm) – 32 38 44 51 62 70 84 – – – –
Wt./100 (lbs) – 37 45 100 162 250 368 644 – – – –
(kg) – 17 20 45 73 113 167 292 – – – –
PF – 23
Class 6000 Threaded
NPS --> 1
⁄8 1
⁄4 3
⁄8 1
⁄2 3
⁄4 1 11⁄ 4 11⁄ 2 2 21⁄ 2 3 4
DN --> 6 8 10 15 20 25 32 40 50 65 75 100
Laterals: (in) – – 2.56 3.00 3.56 4.00 4.75 – – – – –
Figure 2136 A
(mm) – – 65 76 90 102 121 – – – – –
(in) – – 1.50 1.81 2.19 2.44 2.88 – – – – –
H
A
(mm) – – 38 46 56 62 73 – – – – –
H (in) – – 1.00 1.25 1.38 1.50 1.75 – – – – –
K
A K (mm) – – 25 32 35 38 44 – – – – –
Wt./100 (lbs) – – 237 325 548 732 1232 – – – – –
(kg) – – 108 147 249 332 559 – – – – –
Couplings: (in) 0.88 1.00 1.25 1.50 1.75 2.25 2.50 3.00 3.62 4.25 5.00 6.25
Figure 2137 D
(mm) 22 25 32 38 44 57 64 76 92 108 127 159
(in) 1.25 1.38 1.50 1.88 2.00 2.38 2.62 3.12 3.38 3.62 4.25 4.75
D W
(mm) 32 35 38 48 51 60 67 79 86 92 108 121
W Wt./100 (lbs) 18 23 40 69 95 192 230 375 537 890 1345 2425
(kg) 8.2 10 18 31 43 87 104 170 244 404 610 1100
Half Couplings: (in) 0.88 1.00 1.25 1.50 1.75 2.25 2.50 3.00 3.62 4.25 5.00 6.25
Figure 2141 D
(mm) 22 25 32 38 44 57 64 76 92 108 127 159
(in) 0.62 0.69 0.75 0.94 1.00 1.19 1.31 1.56 1.69 1.81 2.13 2.38
D W/2
(mm) 16 18 19 24 25 30 33 40 43 46 54 60
W⁄2 Wt./100 (lbs) 8.0 10.0 18 33 45 86 110 180 260 430 650 1180
(kg) 3.6 4.5 8.2 15 20 39 50 82 118 195 295 535
Pipe Caps: (in) 0.88 1.00 1.25 1.50 1.75 2.25 2.50 3.00 3.62 4.25 5.00 6.25
Figure 2143 D
(mm) 22 25 32 38 44 57 64 76 92 108 127 159
(in) – 1.06 1.06 1.31 1.50 1.69 1.81 1.88 2.00 2.50 2.69 2.94
D P
(mm) – 27 27 33 38 43 46 48 51 64 68 75
P Wt./100 (lbs) 15 18 25 56 75 140 220 290 520 660 960 1700
(kg) 6.8 8.2 11 25 34 64 100 132 236 299 435 771
Reducing Couplings (in) – 1.00 1.25 1.50 1.75 2.25 2.50 3.00 3.62 4.25 5.00 6.25
Figure 2138 D
(mm) – 25 32 38 44 57 64 76 92 108 127 6.25
D (in) – 1.38 1.50 1.88 2.00 2.38 2.62 3.12 3.38 3.62 4.25 4.75
W
(mm) – 35 38 48 51 60 67 79 86 92 108 121
W
Lowest 1 1 1 1 1 1 3 3
– ⁄8 ⁄8 ⁄8 ⁄4 ⁄4 ⁄2 ⁄4 ⁄4 11⁄4 11⁄2 2
Reduction (NPS)
(DN) – 6 6 6 8 8 15 20 20 32 40 50
Wt./100 (lbs) – 23 40 69 95 192 230 375 537 890 1345 2425
(kg) – 10 18 31 43 87 104 170 244 404 610 1100
PF – 24
Class 3000 Socket-Weld
NPS --> 1
⁄8 1
⁄4 3
⁄8 1
⁄2 3
⁄4 1 11⁄ 4 11⁄ 2 2 21⁄ 2 3 4
DN --> 6 8 10 15 20 25 32 40 50 65 75 100
.420/ .555/ .690/ .855/ 1.065 1.330 1.675 1.915 2.406 2.906 3.535 4.545
Socket Dia. (in)
.440 .575 .710 .875 1.085 1.350 1.695 1.935 2.426 2.931 3.560 4.570
B
11 14 18 22 27 34 43 49 61 74 90 115
(mm)
11 15 18 22 28 34 43 49 62 74 90 116
Minimum (in) 0.13 0.13 0.14 0.16 0.17 0.20 0.21 0.22 0.24 0.30 0.33 0.37
C
(mm) 3 3 4 4 4 5 5 6 6 8 8 9
COMMON
.239/ .334/ .463/ .592/ .794 1.019 1.350 1.580 2.037 2.409 3.008 3.966
DIMENSIONS Bore Dia. (in)
.299 .394 .523 .562 .854 1.079 1.410 1.640 2.097 2.529 3.128 4.086
D
6 8 12 15 20 26 34 40 52 61 76 101
(mm)
8 10 13 14 22 27 36 42 53 64 79 104
Socket Depth
0.38 0.38 0.38 0.38 0.50 0.50 0.50 0.50 0.62 0.62 0.62 0.75
J Min.(in)
(mm) 10 10 10 10 13 13 13 13 16 16 16 19
90° Elbows:
(Nominal) (in) 0.44 0.44 0.53 0.62 0.75 0.88 1.06 1.25 1.50 1.62 2.25 2.62
Figure 2150
A
J (mm) 11 11 13 16 19 22 27 32 38 41 57 67
D B Wt./100 (lbs) 13 13 25 50 69 106 163 213 290 638 1088 2369

A
B C (kg) 5.9 5.9 11 23 31 48 74 97 132 289 494 1075
45° Elbows: (Nominal) (in) 0.31 0.31 0.31 0.44 0.50 0.56 0.69 0.81 1.00 1.12 1.25 1.62
Figure 2151 A
(mm) 8 8 8 11 13 14 18 21 25 28 32 41
DB
A
Wt./100 (lbs) 13 13 19 38 50 88 125 163 269 675 1050 1819
J
(kg) 5.9 5.9 8.6 17 23 40 57 74 122 306 476 825
B C
Crosses:
(in) 0.44 0.44 0.53 0.62 0.75 0.88 1.06 1.25 1.50 1.62 2.25 2.62
Figure 2153
A
J C (mm) 11 11 13 16 19 22 27 32 38 41 57 67
DB Wt./100 (lbs) 25 25 34 69 88 144 213 263 444 888 1369 2844
A (kg) 11 11 15 31 40 65 97 119 201 403 621 1290
Tee: (in) 0.44 0.44 0.53 0.62 0.75 0.88 1.06 1.25 1.50 1.62 2.25 2.62
Figure 2152 A
C (mm) 11 11 13 16 19 22 27 32 38 41 57 67
Wt./100 (lbs) 25 31 31 81 113 156 244 325 550 1581 2019 3150
DB
J A (kg) 11 14 14 37 51 71 111 147 249 717 916 1429
Note: When the pipe is seated against the bottom of the socket prior to welding, to prevent possible cracking of the fillet welds, it is recommended
that the pipe be withdrawn approximately 1⁄ 16 in (1.6mm). away from contact with the bottom of the socket before starting the weld.
PF – 25
NPS --> 1
⁄8 1
⁄4 3
⁄8 1
⁄2 3
⁄4 1 11⁄ 4 11⁄ 2 2 21⁄ 2 3 4
DN --> 6 8 10 15 20 25 32 40 50 65 75 100
.420 .555 .690 .855 1.065 1.330 1.675 1.915 2.406 2.906 3.535 4.545
Socket Dia. (in)
.440 .575 .710 .875 1.085 1.350 1.695 1.935 2.426 2.931 3.560 4.570
B
11 14 18 22 27 34 43 49 61 74 90 115
(mm)
11 15 18 22 28 34 43 49 62 74 90 116
Minimum (in) 0.13 0.13 0.14 0.16 0.17 0.20 0.21 0.22 0.24 0.30 0.33 0.37
C
(mm) 3 3 4 4 4 5 5 6 6 8 8 9
COMMON
.239/ .334/ .463 .592 .794 1.019 1.350 1.580 2.037 2.409 3.008 3.966
DIMENSIONS Bore Dia. (in)
.299 .394 .523 .652 .854 1.079 1.410 1.640 2.097 2.529 3.128 4.086
D
6 8 12 15 20 26 34 40 52 61 76 101
(mm)
8 10 13 17 22 27 36 42 53 64 79 104
Socket Depth
0.38 0.38 0.38 0.38 0.50 0.50 0.50 0.50 0.62 0.62 0.62 0.75
J Minimum (in)
(mm) 10 10 10 10 13 13 13 13 16 16 16 19
Laterals: Nominal (in) – – – 1.63 2.00 2.38 2.81 3.19 3.88 – – –
Figure 2158 A
(mm) – – – 41 51 60 71 81 99 – – –
(in) – – – .38 .44 .50 .63 .69 .81 – – –
D
C M
A
(mm) – – – 10 11 13 16 18 21 – – –
B Wt./100 (lbs) – – – 100 175 238 375 500 775 – – –
J A M (kg) – – – 45 79 108 170 227 352 – – –
Couplings:
(in) 0.25 0.25 0.25 0.38 0.38 0.50 0.50 0.50 0.75 0.75 0.75 0.75
Figure 2154 E
J (mm) 6 6 6 10 10 13 13 13 19 19 19 19
C D
Wt./100 (lbs) 10.0 12 20 23 39 68 84 93 161 237 313 507
B
(kg) 4.5 5.4 9.1 10 18 31 38 42 73 108 142 230
E
Half Couplings:
(in) 0.62 0.62 0.69 0.88 0.94 1.12 1.19 1.25 1.62 1.69 1.75 1.88
Figure 2155
F
J (mm) 16 16 18 22 24 28 30 32 41 43 44 48
D
Wt./100 (lbs) 11 14 24 31 47 84 112 132 218 341 486 749
B
(kg) 5.0 6.4 11 14 21 38 51 60 99 155 220 340

F
Reducing Couplings: (in) – 0.25 0.25 0.38 0.38 0.50 0.50 0.50 0.75 0.75 0.75 0.75
Figure 2156 E
(mm) – 6 6 10 10 13 13 13 19 19 19 19
J
Lowest 1 1 1 1 1 1 1 1 1
D – ⁄8 ⁄8 ⁄8 ⁄8 ⁄8 ⁄4 ⁄4 ⁄2 ⁄2 11⁄2 2
Reduction (NPS)
B
(DN) – 6 6 6 6 6 8 8 15 15 40 50
Wt./100 (lbs) – 12 20 23 39 68 84 93 161 237 313 507
E
(kg) – 5.4 9.1 10 18 31 38 42 73 108 142 230
Pipe Caps: Min. (in) 0.19 0.19 0.19 0.25 0.25 0.38 0.38 0.44 0.50 0.62 0.75 0.88
Figure 2157 K
J K (mm) 5 5 5 6 6 10 10 11 13 16 19 22
C Wt./100 (lbs) 6.0 9.0 17 22 35 60 93 115 192 280 475 844
B
(kg) 2.7 4.1 7.7 10 16 27 42 52 87 127 215 383
PF – 26
NPS --> 1
⁄8 1
⁄4 3
⁄8 1
⁄2 3
⁄4 1 11⁄ 4 11⁄ 2 2 21⁄ 2 3 4
DN --> 6 8 10 15 20 25 32 40 50 65 75 100
.420 .555 .690 .855 1.065 1.330 1.675 1.915 2.406 2.906 3.535 4.545
Socket Dia. (in)
.440 .575 .710 .875 1.085 1.350 1.695 1.935 2.426 2.931 3.560 4.570
B
11 14 18 22 27 34 43 49 61 74 90 115
(mm)
11 15 18 22 28 34 43 49 62 74 90 116
Minimum (in) 0.14 0.16 0.17 0.20 0.24 0.27 0.27 0.31 0.37 0.41 0.48 0.58
C
(mm) 4 4 4 5 6 7 7 8 9 10 12 15
COMMON
DIMENSIONS .126 .220 .329 .434 .582 .785 1.130 1.308 1.657 2.065 2.564 3.378
Bore Dia. (in)
.189 .280 .389 .494 .642 .845 1.190 1.368 1.717 2.185 2.684 3.498
D
3 6 8 11 15 20 29 33 42 52 65 86
(mm)
5 7 10 13 16 22 30 35 44 55 68 89
Socket Depth
0.38 0.38 0.38 0.38 0.50 0.50 0.50 0.50 0.62 0.62 0.62 0.75
J Minimum (in)
(mm) 10 10 10 10 13 13 13 13 16 16 16 19
90° Elbows: Figure 2170 Nominal (in) 0.44 0.53 0.62 0.75 0.88 1.06 1.25 1.50 1.62 2.25 2.50 2.62
J A
(mm) 11 13 16 19 22 27 32 38 41 57 64 67
D B Wt./100 (lbs) – – – 88 144 250 325 531 638 1200 1938 3638
A
B C (kg) – – – 40 65 113 147 241 289 544 879 1650
45° Elbows: Figure 2171 (in) 0.31 0.31 0.44 0.50 0.56 0.69 0.81 1.00 1.12 1.25 1.38 1.58
A
(mm) 8 8 11 13 14 18 21 25 28 32 35 40
DB
A
Wt./100 (lbs) – – – 69 131 200 263 475 588 713 1231 2700
J
B C (kg) – – – 31 59 91 119 215 267 323 558 1225
Tee: Figure 2172 (in) – – – 0.75 0.88 1.06 1.25 1.50 1.62 2.25 2.50 2.62
C A
(mm) – – – 19 22 27 32 38 41 57 64 67
DB Wt./100 (lbs) – – – 106 206 338 431 781 869 1663 2381 4532
J A
(kg) – – – 48 93 153 195 354 394 754 1080 2056
Crosses: Figure 2173 (in) – – – 0.75 0.88 1.06 1.25 1.50 1.62 2.25 2.50 2.62
C A
J
(mm) – – – 19 22 27 32 38 41 57 64 67
DB Wt./100 (lbs) – – – 125 250 400 513 900 950 1988 2950 4150
A (kg) – – – 57 113 181 233 408 431 902 1338 1882
Note: When the pipe is seated against the bottom of the socket prior to welding, to prevent possible cracking of the fillet welds, it is recommended
that the pipe be withdrawn approximately 1⁄ 16 in. (1.6mm) away from contact with the bottom of the socket before starting the weld.
PF – 27
NPS --> 1
⁄2 3
⁄4 1 11⁄ 4 11⁄ 2 2 21⁄ 2 3 4
DN --> 15 20 25 32 40 50 65 75 100
Socket Dia.(in) .855 1.065 1.330 1.675 1.915 2.406 2.906 3.535 4.545
.875 1.085 1.350 1.695 1.935 2.426 2.931 3.560 4.570
B
22 27 34 43 49 61 74 90 115
(mm)
22 28 34 43 49 62 74 90 116
Minimum (in) .20 .24 .27 .27 .31 .37 .41 .48 .58
C
(mm) 5 6 7 7 8 9 10 12 15
COMMON
Bore Dia. (in) .434/ .582/ .785/ 1.130/ 1.308/ 1.657 2.065/ 2.564/ 3.378/
DIMENSIONS
.494 .642 .845 1.190 1.368 1.717 2.185 2.684 3.498
D
11 15 20 29 33 42 52 65 86
(mm)
13 16 21 30 35 44 55 68 89
Socket Dept
Minimum (in) 0.38 0.50 0.50 0.50 0.50 0.62 0.62 0.62 0.75
J
(mm) 10 13 13 13 13 16 16 16 19
Laterals: (in) 2.00 2.38 2.81 3.19 3.88 – – – -
Figure 2178 A
(mm) 51 60 71 81 99 – – – -
D
C (in) 0.44 0.50 0.63 0.69 0.81 – – – -

M
A
(mm) 11 13 16 18 21 – – – -
B
Wt. /100 (lbs) 250 325 538 675 1281 – – – –
J A M
(kg) 113 147 244 306 581 – – – –
Couplings:
(in) 0.38 0.38 0.50 0.50 0.50 0.75 0.75 0.75 0.75
Figure 2174 E
J (mm) 10 10 13 13 13 19 19 19 19
C D
Wt./100 (lbs) 46 74 136 144 222 415 533 675 1181
B
(kg) 21 34 62 65 101 188 242 306 536
E
Half Couplings:
(in) 0.88 0.94 1.12 1.19 1.25 1.62 1.69 1.75 1.88
Figure 2175
F
J (mm) 22 24 28 30 32 41 43 44 48
D
B Wt./100 (lbs) 54 80 136 171 262 477 652 872 1429
(kg) 24 36 62 78 119 216 296 396 648

F
Reducing Couplings: (in) – 0.38 0.50 0.50 0.50 0.75 0.75 0.75 0.75
Figure 2176 E
(mm) – 10 13 13 13 19 19 19 19
J
Lowest Reduction 3 3 1 1 3
D – ⁄8 ⁄8 ⁄2 ⁄2 ⁄4 11⁄4 11⁄2 2
(NPS)
B
(DN) – 10 10 15 15 20 32 40 50
Wt./100 (lbs) 74 136 144 222 415 533 695 1181
E
(kg) 34 62 65 101 188 242 315 536
Pipe Caps: Minimum (in) 0.31 0.31 0.44 0.44 0.50 0.62 0.75 0.88 1.12
Figure 2177 K
J K (mm) 8 8 11 11 13 16 19 22 28
C Wt./100 (lbs) 41 57 117 142 217 366 494 766 1453
B
(kg) 19 26 53 64 98 166 224 347 659
PF – 28
High Pressure Plugs and Bushings
Anvil High Pressure Plugs and Bushings

satisfy the requirement of ASME B16.11
Class 2000, 3000 and 6000
NPS --> 1
⁄8 1
⁄4 3
⁄8 1
⁄2 3
⁄4 1 11⁄ 4 11⁄ 2 2 21⁄ 2 3 4
DN --> 6 8 10 15 20 25 32 40 50 65 75 100
Plugs - Square Head: (in) 0.38 0.44 0.50 0.56 0.62 0.75 0.81 0.81 0.88 1.06 1.12 1.25
Figure 2122 A
(mm) 10 11 13 14 16 19 21 21 22 27 28 32
Cmin (in) 0.25 0.25 0.31 0.38 0.44 0.50 0.56 0.62 0.69 0.75 0.81 1.00
Bmin B
(mm) 6 6 8 10 11 13 14 16 18 19 21 25
Amin (in) 0.28 0.38 0.44 0.56 0.62 0.81 0.94 1.12 1.31 1.50 1.69 2.50
C
(mm) 7 10 11 14 16 21 24 28 33 38 43 64
Wt./100 (lbs) 2.0 2.0 5.0 10.0 18 35 59 85 140 225 287 719
(kg) 0.91 0.91 2.3 4.5 8.2 16 27 39 64 102 130 326
Plugs - Hex Head: (Across Flats) (in) 0.44 0.62 0.69 0.88 1.06 1.38 1.75 2.00 2.50 3.00 3.50 4.62
Figure 2142 F
(mm) 11 16 18 22 27 35 44 51 64 76 89 117
F (in) 0.38 0.44 0.50 0.56 0.62 0.75 0.81 0.81 0.88 1.06 1.12 1.25
H
A
(mm) 10 11 13 14 16 19 21 21 22 27 28 32
A (in) 0.25 0.25 0.31 0.31 0.38 0.38 0.56 0.62 0.69 0.75 0.81 1.00
H
(mm) 6 6 8 8 10 10 14 16 18 19 21 25
Wt./100 (lbs) 3.0 6.0 10.0 17 32 48 95 136 225 388 588 1300
(kg) 1.4 2.7 4.5 7.7 15 22 43 62 102 176 267 590
Plugs - Round Head: (in) 0.38 0.44 0.50 0.56 0.62 0.75 0.81 0.81 0.88 1.06 1.12 1.25
Figure 2121 A
(mm) 10 11 13 14 16 19 21 21 22 27 28 32
E (in) 1.38 1.62 1.62 1.75 1.75 2.00 2.00 2.00 2.50 2.75 2.75 3.00
D
(mm) 35 41 41 44 44 51 51 51 64 70 70 76
D (in) 0.41 0.53 0.69 0.84 1.06 1.31 1.69 1.91 2.38 2.88 3.50 4.50
E
A (mm) 10 13 18 21 27 33 43 49 60 73 89 114
Wt./100 (lbs) 13 13 18 25 38 75 113 156 300 475 763 1288
(kg) 5.9 5.9 8.2 11 17 34 51 71 136 215 346 584
Bushings - Hex Head: (in) – 0.44 0.50 0.56 0.62 0.75 0.81 0.81 0.88 1.06 1.12 1.25
Figure 2139 A
(mm) – 11 13 14 16 19 21 21 22 27 28 32
F (in) – 0.62 0.69 0.88 1.06 1.38 1.75 2.00 2.50 3.00 3.50 4.62
F
G (mm) – 16 18 22 27 35 44 51 64 76 89 117
A (in) – 0.12 0.16 0.19 0.22 0.25 0.28 0.31 0.34 0.38 0.41 0.50
G
(mm) – 3 4 5 6 6 7 8 9 10 10 13
1 1 1 1 1 1 1 1 1 1
Lowest Reduction (NPS) – ⁄8 ⁄8 ⁄8 ⁄8 ⁄8 ⁄8 ⁄4 ⁄4 ⁄2 ⁄2 11⁄2
(DN) – 6 6 6 6 6 6 8 8 15 15 40
Wt./100 (lbs) – 2.0 5.0 6.0 13 19 39 68 163 238 350 831
(kg) – 0.91 2.3 2.7 5.9 8.6 18 31 74 108 159 377
Bushings - Flush: (in) – 0.44 0.50 0.56 0.62 0.75 0.81 0.81 0.88 1.06 1.12 1.25
Figure 2140 A
(mm) – 11 13 14 16 19 21 21 22 27 28 32
1 1 1 1 1 1 1 1 3
Lowest Reduction (NPS) – ⁄8 ⁄8 ⁄8 ⁄8 ⁄8 ⁄8 ⁄4 ⁄4 ⁄4 1 11⁄2
A
(DN) – 6 6 6 6 6 6 8 8 20 25 40
Wt./100 (lbs) – 2.0 5.0 6.0 13 13 13 19 38 63 100 200
(kg) – 0.91 2.3 2.7 5.9 5.9 5.9 8.6 17 29 45 91
Note: Plugs and bushings are not identified by Pressure Class.
They may be used for ratings up to Pressure Class 6000 (per ASME B16.11)
PF – 29
Socket-Weld Reducer Inserts
° C RL
45
C
SL Reducer inserts comply with MSS standard SP-79.They enable standard
socket-weld fittings to be used for making any combination of pipe line
SD D B
C reductions quickly and economically. Socket-weld reducer inserts serve
SD D B the same purpose as threaded reducing bushings with threaded fittings.
A K A K
Type 1 - Reducer Insert Type 2 - Reducer Insert
Fig. 2159 Fig. 2179
Socket Shank
Size Depth
Dia. B Dia. SD
Min. K Type
NPS DN NPS DN in mm in mm in mm
3
⁄8 10 x 1⁄4 x8 0.56 14 0.38 10 0.68 17 1
1
x 1⁄4 x8 0.56 14 0.38 10 0.84 21 1
⁄2 15
3
x ⁄8 x 10 0.7 18 0.38 10 0.84 21 1
x 1⁄4 x8 0.56 14 0.38 10 1.05 27 2
3
⁄4 20 x 3⁄8 x 10 0.7 18 0.38 10 1.05 27 2
1
x ⁄2 x 15 0.86 22 0.38 10 1.05 27 1
x 1⁄4 x8 0.56 14 – – 1.31 33 2
3
x ⁄8 x 10 0.7 18 0.38 10 1.31 33 2
1 25
x 1⁄2 x 15 0.86 22 0.38 10 1.31 33 2
x 3⁄4 x 20 1.07 27 0.5 13 1.31 33 1
1
x ⁄4 x8 0.5 13 0.38 10 1.66 42 2
x 3⁄8 x 10 0.7 18 0.38 10 1.66 42 2
11⁄4 32 x 1⁄2 x 15 0.86 22 0.38 10 1.66 42 2
x 3⁄4 x 20 1.07 27 0.5 13 1.66 42 2
x1 x 25 1.33 34 – – 1.66 42 1
3
x ⁄8 x 10 0.7 18 0.38 10 1.9 48 2
x 1⁄2 x 15 0.86 22 0.38 10 1.9 48 2
11⁄2 40 x 3⁄4 x 20 1.07 27 0.5 13 1.9 48 2
x1 x 25 1.34 34 0.5 13 1.9 48 2
x 11⁄4 x 32 1.68 43 0.5 13 1.9 48 1
x 1⁄2 x 15 0.86 22 0.38 10 2.38 60 2
x 3⁄4 x 20 1.07 27 0.5 13 2.38 60 2
2 50 x1 x 25 1.34 34 0.5 13 2.38 60 2
x 11⁄4 x 32 1.68 43 0.5 13 2.38 60 2
1
x 1 ⁄2 x 40 1.92 49 0.5 13 2.38 60 1
x 3⁄4 x 20 1.07 27 0.5 13 2.88 73 2
x1 x 25 1.34 34 0.5 13 2.88 73 2
1 1
2 ⁄2 65 x 1 ⁄4 x 32 1.68 43 0.5 13 2.88 73 2
1
x 1 ⁄2 x 40 1.92 49 0.5 13 2.88 73 2
x2 x 50 2.41 61 0.62 16 2.88 73 1
x1 x 25 1.34 34 0.5 13 3.5 89 2
1
x 1 ⁄4 x 32 1.68 43 0.5 13 3.5 89 2
1
3 80 x 1 ⁄2 x 40 1.92 49 0.5 13 3.5 89 2
x2 x 50 2.41 61 0.62 16 3.5 89 2
x 21⁄2 x 65 2.91 74 0.62 16 3.5 89 1
To minimize the possibility of cracking of the fillet welds, it is recommended that the shank portion of the reducer be withdrawn approximately
.0625 in. (1.6 mm) away from the contact with the bottom of the socket before starting the weld. Likewise, the pipe is to be kept away from
contacting the bottom of the reducer socket before welding.
PF – 30
C RL CLASS 3000 - For use with
°
45
C
SL Schedule 40 and 80 Pipe
SD D B
C Reducer inserts comply with MSS standard SP-79.They enable standard
SD D B
socket-weld fittings to be used for making any combination of pipe line
reductions quickly and economically. Socket-weld reducer inserts serve
A K A K the same purpose as threaded reducing bushings with threaded fittings.
Fig. 2159 Fig. 2179
CLASS 3000 - For use with

Size Schedule 40 and 80 Pipe
A D C Min. SL RL Min.
NPS DN NPS DN in mm in mm in mm in mm in mm
3 1
⁄8 10 x ⁄4 x8 0.75 19 0.36 9 0.149 4 0.56 14 – –
1
x 1⁄4 x8 0.81 21 0.36 9 0.149 4 0.62 16 – –
⁄2 15
3
x ⁄8 x 10 0.81 21 0.49 12 0.158 4 0.62 16 – –
x 1⁄4 x8 0.69 18 0.36 9 0.149 4 – – 1.06 27
3
⁄4 20 x 3⁄8 x 10 0.62 16 0.49 12 0.158 4 – – 1.06 27
1
x ⁄2 x 15 0.88 22 0.62 16 0.184 5 0.69 18 – –
x 1⁄4 x8 0.75 19 0.36 9 0.149 4 – – 1.12 28
x 3⁄8 x 10 0.69 18 0.49 12 0.158 4 – – 1.12 28
1 25
x 1⁄2 x 15 0.62 16 0.62 16 0.184 5 – – 1.12 28
3
x ⁄4 x 20 0.94 24 0.82 21 0.193 5 0.75 19 – –
1
x ⁄4 x8 0.88 22 0.36 9 0.149 4 – – 1.25 32
x 3⁄8 x 10 0.81 21 0.49 12 0.158 4 – – 1.25 32
1
1 ⁄4 32 1
x ⁄2 x 15 0.75 19 0.62 16 0.184 5 – – 1.25 32
x 3⁄4 x 20 0.69 18 0.82 21 0.193 5 – – 1.25 32
x1 x 25 1 25 1.05 27 0.224 6 0.81 21 – –
3
x ⁄8 x 10 0.88 22 0.49 12 0.158 4 – – 1.31 33
x 1⁄2 x 15 0.81 21 0.62 16 0.184 5 – – 1.31 33
11⁄2 40 x 3⁄4 x 20 0.75 19 0.82 21 0.193 5 – – 1.31 33
x1 x 25 0.69 18 1.05 27 0.224 6 – – 1.31 33
x 11⁄4 x 32 1.12 28 1.38 35 0.239 6 0.88 22 – –
x 1⁄2 x 15 1 25 0.62 16 0.184 5 – – 1.5 38
x 3⁄4 x 20 0.94 24 0.82 21 0.193 5 – – 1.5 38
2 50 x1 x 25 0.88 22 1.05 27 0.224 6 – – 1.5 38
x 11⁄4 x 32 0.81 21 1.38 35 0.239 6 – – 1.5 38
1
x 1 ⁄2 x 40 1.25 32 1.61 41 0.25 6 1 25 – –
x 3⁄4 x 20 1.56 40 0.82 21 0.193 5 – – 2.12 54
x1 x 25 1.5 38 1.05 27 0.226 6 – – 2.12 54
1 1
2 ⁄2 65 x 1 ⁄4 x 32 1.44 37 1.38 35 0.239 6 – – 2.12 54
1
x 1 ⁄2 x 40 1.38 35 1.61 41 0.25 6 – – 2.12 54
x2 x 50 1.81 46 2.07 53 0.273 7 1.5 38 – –
x1 x 25 1.25 32 1.05 27 0.224 6 – – 1.87 47
x 11⁄4 x 32 1.19 30 1.38 35 0.239 6 – – 1.87 47
1
3 80 x 1 ⁄2 x 40 1.12 28 1.61 41 0.25 6 – – 1.87 47
x2 x 50 1 25 2.07 53 0.273 7 – – 1.87 47
x 21⁄2 x 65 1.5 38 2.47 63 0.345 9 1.25 32 – –
PF – 31
RL
° C
45
SL C Schedule 160 Pipe
SD D B
C Reducer inserts comply with MSS standard SP-79.They enable standard
SD D B socket-weld fittings to be used for making any combination of pipe line
reductions quickly and economically. Socket-weld reducer inserts serve the
A K A K same purpose as threaded reducing bushings with threaded fittings.
Fig. 2159 Fig. 2179

Size Schedule 160 Pipe
A D C Min. SL RL. Min
Type
NPS DN NPS DN in mm in mm in mm in mm in mm
3 1
⁄8 10 x ⁄4 x8 1 0.81 21 0.25 6 0.181 5 0.62 16 – –
1
x 1⁄4 x8 1 0.81 21 0.25 6 0.181 5 0.62 16 – –
⁄2 15
3
x ⁄8 x 10 1 0.88 22 0.36 9 0.198 5 0.62 16 – –
x 1⁄4 x8 2 0.88 22 0.25 6 0.181 5 – – 1.26 32
3
⁄4 20 x 3⁄8 x 10 1 0.88 22 0.36 9 0.198 5 0.75 19 – –
1
x ⁄2 x 15 1 1 25 0.46 12 0.235 6 0.75 19 – –
x 1⁄4 x8 2 0.94 24 0.25 6 0.181 5 – – 1.31 33
x 3⁄8 x 10 2 0.88 22 0.36 9 0.198 5 – – 1.31 33
1 25
x 1⁄2 x 15 1 1.12 28 0.46 12 0.235 6 0.81 21 – –
3
x ⁄4 x 20 1 1.12 28 0.61 15 0.274 7 0.81 21 – –
1
x ⁄4 x8 2 1 25 0.25 6 0.181 5 – – 1.37 35
x 3⁄8 x 10 2 0.94 24 0.36 9 0.198 5 – – 1.37 35
1
1 ⁄4 32 1
x ⁄2 x 15 2 0.88 22 0.46 12 0.235 6 – – 1.37 35
x 3⁄4 x 20 2 0.81 21 0.61 15 0.274 7 – – 1.37 35
x1 x 25 1 1.19 30 0.81 21 0.312 8 0.88 22 – –
3
x ⁄8 x 10 2 1.12 28 0.36 9 0.198 5 – – 1.56 40
x 1⁄2 x 15 2 1.06 27 0.46 12 0.235 6 – – 1.56 40
11⁄2 40 x 3⁄4 x 20 2 1 25 0.61 15 0.274 7 – – 1.56 40
x1 x 25 1 1.12 28 0.81 21 0.312 8 1 25 – –
x 11⁄4 x 32 1 1.38 35 1.16 29 0.312 8 1 25 – –
x 1⁄2 x 15 2 1.12 28 0.46 12 0.235 6 – – 1.62 41
x 3⁄4 x 20 2 1.06 27 0.61 15 0.274 7 – – 1.62 41
2 50 x1 x 25 2 1 25 0.82 21 0.312 8 – – 1.62 41
x 11⁄4 x 32 2 0.94 24 1.16 29 0.312 8 – – 1.62 41
1
x 1 ⁄2 x 40 1 1.81 46 1.34 34 0.351 9 1.13 29 – –
x 3⁄4 x 20 – – – – – – – – – – –
x1 x 25 – – – – – – – – – – –
1 1
2 ⁄2 65 x 1 ⁄4 x 32 – – – – – – – – – – –
1
x 1 ⁄2 x 40 – – – – – – – – – – –
x2 x 50 1 1.68 43 1.69 43 0.43 11 1.25 32 – –
x1 x 25 – – – – – – – – – – –
1
x 1 ⁄4 x 32 – – – – – – – – – – –
1
3 80 x 1 ⁄2 x 40 – – – – – – – – – – –
x2 x 50 – – – – – – – – – – –
x 21⁄2 x 65 – – – – – – – – – – –
PF – 32

Pressure Ratings In accordance with ASME standard B16.11 - “Forged Fi tings, Socket-welding and Threaded”
this table show the schedule of pipe corresponding to each class of fitting for rating purposes.
Schedule
Class ASME B16.11 provides that the maximum allowable pressure of a fitting be computed in
N.P.T. S.W. accordance with the applicable piping code or regulation for straight seamless pipe or for
2000 80 - material of equivalent composition and mechanical properties to the fitting. Any corrosion or
3000 160 80 mechanical allowances and any reduction in allowable stress due to temperature or other
6000 XXS/XXH 160
service conditions must be applied to the pipe and fitting alike.
Reducing Fittings
3⁄4
Reducing elbows, tees and crosses are available in both threaded 3⁄4
Side
and socket-welding. Branch Outlet
Run
11⁄4 1⁄2
11⁄4
On reducing tees and crosses give the size of the largest run open-
11⁄2 x 3⁄4 x 11⁄4 11⁄2 x 3⁄4 x 11⁄4 x 1⁄2
ing; then give the opposite opening. On a tee give the branch size 11⁄2 TEE 11⁄2 CROSS
last. On a cross give the largest side outlet third and the opposite
opening last. 19
19
Side
Branch Outlet
Run
32 13
38 x 19 x 32 mm 38 x 19 x 32 x 13 mm
38 38
TEE CROSS
Forged Steel Anvilets

Anvil Anvilets provide a strong branch pipe connection, consid- INSTALLATION NOTE
erably stronger than a welded pipe-to-pipe connection. Conse- Anvil Anvilets are designed to have no more than a 1⁄ 16" gap (1.6mm)
quently, with good welding procedures, Anvil Anvilets offer between the base or skirt of the Anvilet when it is seated directly upon
greater resistance to distortion and bursting. the appropriate run pipe. However, it is recommended that the skirt of
Anvil Anvilets readily and economically permit the adding of Anvilets be held slightly above the run pipe and tack welded to provide
branch connectors to existing piping installations, eliminating the a small continuous root gap between the skirt and run pipe before com-
relatively higher cost of cutting or disassembly and re-assembly pleting the all-around welding beads or fillet.
required for the installation of tees. SPECIALS
Anvil Anvilets of the same outlet size as a header or run pipe size Your local Anvil Branch will be more than happy to assist you with
(i.e.“Full Size” Anvilets) are so proportioned that the (elliptically- specially machined outlets and those made of alloy material.
shaped) hole in the header pipe has the minimum weakening or PRESSURE TEMPERATURE RATINGS
distortion effect, and yet provides good fluid flow characteristics. MSS standard Practice SP-97 gives the following correlation between fit-
SPECIFICATIONS ting pressure class and pipe schedule number/wall thickness designation
Chemical and physical properties are rigidly controlled to ensure for calculation of pressure-temperature ratings:
consistently high quality. Physical and chemical test reports are
Branch Pressure Branch Pipe Wall
available on request.Traceability of individual Anvilets can be
Connection Class of Connection Size for Rating
established through the heat code of each fitting.
Type Fitting NPS DN Basis
Anvil Anvilets meet the requirements of MSS standard SP-97.
They are forged from steel which complies with ASTM A105. STD 1
⁄8 - 24 6 - 600 STD
Threaded Anvilets - conform with ASME B1.20.1. Buttweld XS/XH 1
⁄8 - 24 6 - 600 XS/XH
Socket-Weld Anvilets - dimensions conform with ASME B16.11. SCH 160 1
⁄2- 6 15 - 150 SCH 160
Buttweld Anvilets - ends conform with ASME B16.25. 3,000 1
⁄4 - 4 8 - 100 XS/XH
Threaded
1
6,000 ⁄2- 2 15 - 50 SCH 160
REINFORCEMENT REQUIREMENTS 3,000 1
⁄2- 2 15 - 50 XS/XH
ASME B31.1 Power Piping Code Socket-Welding
1
ASME B31.3 Refinery Code 6,000 ⁄2- 2 15 - 50 SCH 160
FORGING MARKINGS The maximum allowable pressure of a fitting is computed in

Anvil Anvilets are clearly marked with the following: accordance with the applicable piping code or regulation for
straight seamless header (run) pipe or for material of equivalent
❑ Outlet size
composition and mechanical properties to the fitting. Any corro-
❑ Range of run pipe sizes that the Anvilet will fit
sion or mechanical allowances and any reduction in allowable
❑ The weight, schedule number, or pressure class
stress due to temperature or other service conditions, must be
❑ The material specification
applied to the pipe and fitting alike.
❑ Steel heat code identification
PF – 33
Forged Steel Anvilets
Run Size Consolidation
Run Size Consolidation of 1⁄ 16" (1.6mm) between the fitting and the pipe (on the largest
Anvilets are manufactured to cover as many run sizes as possible size of run pipe shown on the fitting).The following charts show
per outlet size.The range of run sizes is based on a maximum gap the range of run pipe sizes per outlet size.
standard, XS/XH & Class 3000 Fittings Sch. 160 & XXS/XXH
For outlet sizes 5 to 36 NPS (125 - 900 DN), order for specific run pipe size For outlet sizes 21⁄ 2 to 12 NPS (65 - 300 DN), order for specific run pipe size
NPS Nominal Run Pipe Size Nominal Run Pipe Size NPS Nominal Run Pipe Size Nominal Run Pipe Size
NPS DN NPS DN NPS DN NPS DN NPS DN NPS DN
3
⁄8 x 1⁄8 10 x 6 21⁄2-11⁄4 x 1⁄8 65 - 32 x 6 1
1 1
⁄2 x 1⁄2 15 x 15 – –
⁄8 6 ⁄2 x 1⁄8 15 x 6 36-3 x 1⁄8 900 - 80 x 6 1
⁄2 15 11⁄4-3⁄4 x 1⁄2 32 - 20 x 15 – –
1 - 3⁄4 x 1⁄8 25 - 20 x 6 – –
3 36-11⁄2 x 1⁄2 900 - 40 x 15 – –
⁄8 x 1⁄4 10 x 8 21⁄2-11⁄4 x 1⁄4 65 - 32 x 8
1 1 1-3⁄4 x 3⁄4 25 - 20 x 20 – –
⁄4 8 ⁄2 x 1⁄4 15 x 8 36-3 x 1⁄4 900 - 80 x 8
2-11⁄4 x 3⁄4 50 - 32 x 20 – –
1 - 3⁄4 x 1⁄4 25 - 20 x 8 – – 3
⁄4 20
1 3
15 x 10 1 1 3
65 - 32 x 10 6-21⁄2 x 3⁄4 150 - 65 x 20 – –
3 ⁄2 x ⁄8 2 ⁄2-1 ⁄4 x ⁄8
⁄8 10 36-8 x 3⁄4 900 - 200 x 20 – –
1 - 3⁄4 x 3⁄8 25 - 20 x 10 36-3 x 3⁄8 900 - 80 x 10
1 1x1 25 x 25 – –
⁄2 x 1⁄2 15 x 15 21⁄2-2 x 1⁄2 65 - 50 x 15
3 1 21⁄2-11⁄4 x 1 65 - 32 x 25 – –
1 ⁄4 x ⁄2 20 x 15 8-3 x 1⁄2 200 - 80 x 15 1 25
⁄2 15 10-3 x 1 250 - 80 x 25 – –
1 x 1⁄2 25 x 15 36-10 x 1⁄2 900 - 250 x 15
36-12 x 1 900 - 300 x 25 – –
11⁄2-11⁄4x1⁄2 40 - 32 x 15 – –
3 11⁄2-11⁄4x 11⁄4 40 - 32 x 32 – –
⁄4 x 3⁄4 20 x 20 5-3 x 3⁄4 125 - 80 x 20
21⁄2-2 x 11⁄4 65 - 50 x 32 – –
3 1 x 3⁄4 25 x 20 12-6 x 3⁄4 300 - 150 x 20 11⁄4 32
⁄4 20 1 1 3 10-3 x 11⁄4 250 - 80 x 32 – –
1 ⁄2-1 ⁄4x ⁄4 40 - 32 x 20 36-14 x 3⁄4 900 - 350 x 20
36-12 x 11⁄4 900 - 300 x 32 – –
21⁄2-2 x 3⁄4 65 - 50 x 20 – –
11⁄2 x 11⁄2 40 x 40 20-10 x 11⁄2 500 - 250 x 40
1x1 25 x 25 31⁄2-3 x 1 90 - 80 x 25
21⁄2-2 x 11⁄2 65 - 50 x 40 22 x 11⁄2 550 x 40
11⁄4 x 1 32 x 25 5-4 x 1 125 - 100 x 25 11⁄2 40
1 25 11⁄2 x 1 40 x 25 10-6 x 1 250 - 150 x 25 31⁄2-3 x 11⁄2 90 - 80 x 40 36-24 x 11⁄2 900 - 600 x 40
2x1 50 x 25 36-12 x 1 900 - 300 x 25 8-4 x 11⁄2 200 -100 x 40 – –
21⁄2 x 1 65 x 25 – – 2x2 50 x 50 8-6 x 2 200 - 150 x 50
11⁄4 x 11⁄4 32 x 32 5-4 x 11⁄4 125 - 100 x 32 21⁄2 x 2 65 x 50 18-10 x 2 450 - 250 x 50
2 50
11⁄2 x 11⁄4 40 x 32 8-6 x 11⁄4 200 - 150 x 32 31⁄2-3 x 2 90 -80 x 50 36-20 x 2 900 - 500 x 50
11⁄4 32 2 x 11⁄4 50 x 32 18-10 x 11⁄4 450 - 250 x 32 5-4 x 2 125 - 100 x 50 – –
21⁄2 x 11⁄4 65 x 32 36-20 x 11⁄4 900 - 500 x 32
31⁄2-3 x 11⁄4 90 - 80 x 32 – – Class 6000 Fittings
11⁄2 x 11⁄2 40 x 40 6-5 x 11⁄2 150 - 125 x 40 For outlet sizes 21⁄ 2 to 12 NPS, order for specific run pipe size
2 x 11⁄2 50 x 40 12-8 x 11⁄2 300 - 200 x 40
11⁄2 40 21⁄2 x 11⁄2 65 x 40 24-14 x 11⁄2 600 - 350 x 40 NPS Nominal Run Pipe Size Nominal Run Pipe Size
3 x 11⁄2 80 x 40 36-26 x 11⁄2 900 - 650 x 40 NPS DN NPS DN NPS DN
4-31⁄2 x 11⁄2 100 - 90 x 40 – – 1-3⁄4 x 1⁄2 25 x 15 – –
2x2 50 x 50 5x2 125 x 50 2-11⁄4 x 1⁄2 50 x 15 – –
21⁄2 x 2 65 x 50 6x2 150 x 50 1⁄2 15
6-21⁄2 x 1⁄2 150 x 15 – –
2 50 3x2 80 x 50 10-8 x 2 250 - 200 x 50 36-8 x 1⁄2 900 x 15 – –
4-31⁄2 x 2 100 - 90 x 50 18-12 x 2 450 - 300 x 50 1 x 3⁄4 25 x 20 – –
– – 36-20 x 2 900 - 500 x 50 21⁄2-11⁄4x3⁄4 65 x 20 – –
3
21⁄2 x 21⁄2 65 x 65 6 x 21⁄2 150 x 65 ⁄4 20
10-3 x 3⁄4 250 x 20 – –
3 x 21⁄2 80 x 65 8 x 21⁄2 200 x 65 36-12 x 3⁄4 900 x 20 – –
21⁄2 65 31⁄2 x 21⁄2 90 x 65 12-10 x 21⁄2 300 - 250 x 65 11⁄2-11⁄4 x 1 40 x 25 – –
4 x 21⁄2 100 x 65 18-14 x 21⁄2 450 - 350 x 65 21⁄2-2 x 1 65 x 25 – –
5 x 21⁄2 125 x 65 36-20 x 21⁄2 900 - 500 x 65 1 25
10-3 x 1 250 x 25 – –
3x3 80 x 80 8x3 200 x 80 36-12 x 1 900 x 25 – –
31⁄2 x 3 90 x 80 10 x 3 250 x 80 11⁄2 x 11⁄4 40 x 32 36-10 x 11⁄4 900 - 250 x 32
3 80 4x3 100 x 80 14-12 x 3 350 - 300 x 80 21⁄2-2 x 11⁄4 65 x 32 – –
5x3 125 x 80 20-16 x 3 500 - 400 x 80 11⁄4 32
31⁄2-3 x 11⁄4 90 x 32 – –
6x3 150 x 80 36-24 x 3 900 - 600 x 80 8-4 x 11⁄4 200 x 32 – –
31⁄2 x 31⁄2 90 x 90 10 x 31⁄2 250 x 90
2 x 11⁄2 50 x 40 8-6 x 11⁄2 200 - 150 x 40
4 x 31⁄2 100 x 90 14-12 x 31⁄2 350 - 300 x 90
21⁄2 x 11⁄2 65 x 40 18-10 x 11⁄2 450 - 150 x 40
31⁄2 90 5 x 31⁄2 125 x 90 20-16 x 31⁄2 500 - 400 x 90 11⁄2 40
31⁄2-3 x 11⁄2 90 x 40 36-20 x 11⁄2 900 - 500 x 40
6 x 31⁄2 150 x 90 36-24 x 31⁄2 900 - 600 x 90 5-4 x 11⁄2 125 x 40 – –
8 x 31⁄2 200 x 90 – – 2.5 x 2 65 x 50 6x2 150 x 50
4x4 100 x 100 10 x 4 250 x 100 3x2 80 x 50 10-8 x 2 250 - 200 x 50
5x4 125 x 100 14-12 x 4 350 - 300 x 100 2 50
4 100 4x2 100 x 50 20-12 x 2 500 - 300 x 50
6x4 150 x 100 20-16 x 4 500 - 400 x 100 5x2 125 x 50 36-24 x 2 900 - 600 x 50
8x4 200 x 100 36-24 x 4 900 - 600 x 100
Example: 12-8 x 11 ⁄ 2 NPS (300 - 200 x 50 DN) Note: Clearly specify the schedules or weights of the branch and run pipe
12" NPS (300 DN) — is the largest run pipe size for which the fitting is applicable. if they differ.
8" NPS (200 DN) — is the smallest run pipe size for which the fitting is applicable. Example: 3" NPS (80 DN) Sch. 80 x 1 1⁄ 2" NPS (40 DN) Sch 40 BW Anvilet
1 1⁄ 2" NPS (50 DN) — is the outlet (branch) size.
PF – 34
Buttweld Anvilets
Full and Reducing Sizes - Standard & XS/XH
BRANCH
PIPE
A
RUN
PIPE
H1
1
K2
See following page for “H” Dimension.
C
K2 Diameter K of Anvilet bore is the same as the inside
diameter of the branch pipe of matching weight or schedule. B
Outlet Nominal Run Standard XS/XH

Size Pipe Size A B C Weight A B C Weight
NPS DN NPS DN in mm in mm in mm lbs kg in mm in mm in mm lbs kg
1
⁄2 15 3
⁄4 19 5
⁄8 16 15
⁄ 16 24 0.16 0.07 3
⁄4 19 5
⁄8 16 15
⁄ 16 24 0.17 0.08
1
⁄2 15 3
⁄ 4 - 36 20 - 900 3
⁄4 19 15
⁄ 16 24 15
⁄ 16 24 0.17 0.08 3
⁄4 19 15
⁄ 16 24 15
⁄ 16 24 0.19 0.09
3
⁄4 20 7
⁄8 22 13
⁄ 16 22 13⁄ 16 30 0.25 0.11 7
⁄8 22 13
⁄ 16 22 13⁄ 16 30 0.26 0.12
3
⁄4 20
1 - 36 25 - 900 7
⁄8 22 13⁄ 16 30 13⁄ 16 30 0.26 0.12 7
⁄8 22 13⁄ 16 30 13⁄ 16 30 0.30 0.14
1 25 11⁄ 16 27 11⁄ 32 26 17⁄ 16 37 0.42 0.19 1 ⁄ 16
1
27 11⁄ 32 26 17⁄ 16 37 0.44 0.20
1 25
11⁄ 4 - 36 32 - 900 11⁄ 16 27 17⁄ 16 37 17⁄ 16 37 0.50 0.23 11⁄ 16 27 17⁄ 16 37 17⁄ 16 37 0.53 0.24
1 1⁄ 4 32 1 1⁄ 4 32 1 3⁄ 8 35 1 3⁄ 4 44 0.75 0.34 1 1⁄ 4 32 1 3⁄ 8 35 1 3⁄ 4 44 0.77 0.35
1 1⁄ 4 32
11⁄ 2- 36 40 - 900 1 1⁄ 4 32 1 3⁄ 4 44 1 3⁄ 4 44 0.82 0.37 1 ⁄4
1
32 1 3⁄ 4 44 1 3⁄ 4 44 0.88 0.40
1 1⁄ 2 40 15⁄ 16 33 1 5⁄ 8 41 2 51 0.85 0.39 1 ⁄ 16
5
33 1 5⁄ 8 41 2 51 0.90 0.41
1 1⁄ 2 40
2- 36 50 - 900 15⁄ 16 33 2 51 2 51 1.2 0.54 1 ⁄ 16
5
33 2 51 2 51 1.3 0.59
2 50 1 1⁄ 2 38 21⁄ 16 52 29⁄ 16 65 1.6 0.73 1 1⁄ 2 38 21⁄ 16 52 29⁄ 16 65 1.7 0.77
2 50
21⁄ 2 - 36 65 - 900 1 1⁄ 2 38 29⁄ 16 65 29⁄ 16 65 1.9 0.86 1 1⁄ 2 38 29⁄ 16 65 29⁄ 16 65 1.8 0.82
2 1⁄ 2 65 1 5⁄ 8 41 27⁄ 16 62 3 76 2.4 1.1 1 5⁄ 8 41 27⁄ 16 62 3 76 2.6 1.2
2 1⁄ 2 65
3- 36 80 - 900 1 5⁄ 8 41 3 76 3 76 2.7 1.2 1 ⁄8
5
41 3 76 3 76 2.7 1.2
3 80 1 3⁄ 4 44 31⁄ 16 78 311⁄ 16 94 3.8 1.7 1 3⁄ 4 44 31⁄ 16 78 311⁄ 16 94 4.3 2.0
3 80
31⁄ 2 - 36 90 - 900 1 3⁄ 4 44 311⁄ 16 94 311⁄ 16 94 4.2 1.9 1 3⁄ 4 44 311⁄ 16 94 311⁄ 16 94 4.2 1.9
3 1⁄ 2 90 2 51 39⁄ 16 90 4 102 5.0 2.3 2 51 39⁄ 16 90 4 102 5.1 2.3
3 1⁄ 2 90
4 - 36 100 - 900 17⁄ 8 48 4 102 4 102 5.5 2.5 1 7⁄ 8 48 4 102 4 102 5.6 2.5
4 100 2 51 4 102 4 3⁄ 4 121 7.6 3.4 2 51 4 102 4 3⁄ 4 121 7.5 3.4
4 100
5 - 36 125 - 900 2 51 4 3⁄ 4 121 4 3⁄ 4 121 7.1 3.2 2 51 4 3⁄ 4 121 4 3⁄ 4 121 7.0 3.2
5 125 2 1⁄ 8 54 51⁄ 16 129 513⁄ 16 149 8.5 3.9 21⁄ 16 52 51⁄ 16 129 513⁄ 16 149 7.5 3.4
5 125
6 - 36 150 - 900 21⁄ 4 57 — — 59⁄ 16 141 10 4.7 2 1⁄ 4 57 — — 59⁄ 16 141 10 4.7
6 150 2 3⁄ 8 60 61⁄ 16 154 611⁄ 16 170 14 6.4 31⁄ 16 78 61⁄ 16 154 611⁄ 16 170 15 6.8
6 150
8- 36 200 - 900 23⁄ 8 60 — — 611⁄ 16 170 12 5.4 31⁄ 16 78 — — 611⁄ 16 170 23 10
8 200 2 3⁄ 4 70 715⁄ 16 202 8 ⁄ 16
11
221 28 13 3 7⁄ 8 98 7 5⁄ 8 194 811⁄ 16 221 32 15
8 200
10 - 36 250 - 900 23⁄ 4 70 — — 811⁄ 16 221 23 10 3 7⁄ 8 98 — — 811⁄ 16 221 37 17
10 250 31⁄ 16 78 10 254 10 ⁄ 16
13
276 39 18 3 1⁄ 2 89 9 3⁄ 4 248 107⁄ 16 265 46 21
10 250
12 - 36 300 - 900 31⁄ 16 78 — — 1013⁄ 16 276 36 16 311⁄ 16 94 — — 107⁄ 16 265 46 21
12 300 3 3⁄ 8 86 12 305 1213⁄ 16 327 65 29 315⁄ 16 100 113⁄ 4 298 13 330 61 28
12 300
14 - 36 350 - 900 33⁄ 8 86 — — 1213⁄ 16 327 59 27 41⁄ 16 103 — — 121⁄ 2 318 61 28
14 350 3 1⁄ 2 89 131⁄ 4 337 14 ⁄ 16
1
357 70 32 4 1⁄ 8 105 13 330 145⁄ 16 364 75 34
14 350
16 - 36 400 - 900 31⁄ 2 89 — — 141⁄ 16 357 66 30 315⁄ 16 100 — — 1313⁄ 16 352 70 32
16 400 311⁄ 16 94 151⁄ 4 387 161⁄ 16 408 92 42 47⁄ 16 113 15 381 161⁄ 2 419 115 52
16 400
18 - 36 450 - 900 311⁄ 16 94 — — 161⁄ 16 408 75 34 43⁄ 16 106 — — 157⁄ 8 403 102 46
18 450 41⁄ 16 103 171⁄ 4 438 185⁄ 8 473 125 57 411⁄ 16 119 17 432 185⁄ 8 473 130 59
18 450
20 - 36 500 - 900 313⁄ 16 98 — — 181⁄ 16 459 97 44 4 3⁄ 8 111 — — 1715⁄ 16 456 130 59
20 500 4 5⁄ 8 117 191⁄ 4 489 201⁄ 16 510 175 79 5 127 19 483 2013⁄ 16 530 187 85
20 500
24 - 36 600 - 900 4 102 — — 20 508 118 54 411⁄ 16 119 — — 201⁄ 16 510 158 72
24 600 5 3⁄ 8 137 231⁄ 4 591 251⁄ 8 638 280 127 5 1⁄ 2 140 23 584 251⁄ 8 638 316 143
24 600
26 - 36 650 - 900 49⁄ 16 116 — — 243⁄ 16 614 220 100 5 1⁄ 2 140 — — 243⁄ 16 614 290 132
Each outlet size of the reducing Anvilets listed above is supplied in several different ranges of run pipe size. (See page PF-34)
Standard Weight: standard weight buttweld Anvilets are used with all sizes of Extra Strong: Extra Strong buttweld Anvilets are used with all sizes of XS (some-
standard pipe or Sch. 40 pipe, up to and including 10 NPS (250 DN). These Anvilets may be times referred to as XH) pipe and are used with Sch. 80 pipe up to and including sizes
used in conjunction with Sch. 40 and 2000 lb. fittings. Sch. 40 buttweld Anvilets of outlet 8 NPS (200 DN). These Anvilets may be used in conjunction with Sch. 80 and 3000 lb.
size 24 NPS (600 DN) and over are available upon request. fittings. Sch. 80 buttweld Anvilets of outlet size 24 NPS (600 DN) and over are available
upon request.
PF – 35
Buttweld Anvilets - Dimension “H”* (NPS)
*Dimension ‘H’ is the distance in inches from the center of the run pipe to
BRANCH
the face of the Anvilet. The weld or root gap is not included in the ‘H’
PIPE
dimension below.
Dimension ‘H’ is also indicated on the diagrams shown on page PF-35
and page PF-36.
ROOT
GAP
H*
RUN
C PIPE
Nom. OUTLET SIZES (NPS)

Pipe
Run Pipe
Weight or
Size 1
⁄8 1
⁄4 3
⁄8 1
⁄2 3
⁄4 1 11⁄ 4 11⁄ 2 2 21⁄ 2 3 31⁄ 2 4 5 6 8 10 12 14 16 18 20 24
Sch. No.
(NPS)
3
⁄8 STD & XS 1 1
1
STD & XS 11⁄ 16 11⁄ 16 13⁄ 16 13⁄ 16
⁄2
S 160 & XXS 1 1⁄ 2
3
STD & XS 1 ⁄ 16 1 ⁄ 16
3 3
1 ⁄4
1
1 1⁄ 4 17⁄ 16
⁄4
S 160 & XXS 1 ⁄8
5
1 3⁄ 4
STD & XS 1 ⁄ 16 1 ⁄ 16
5 5
1 ⁄8
3
1 ⁄8
3
1 1⁄ 2 111⁄ 16
1
S 160 & XXS 1 3⁄ 4 1 7⁄ 8 2 1⁄ 8
STD & XS 17⁄ 16 17⁄ 16 19⁄ 16 19⁄ 16 111⁄ 16 1 7⁄ 8 21⁄ 16
11⁄ 4
S 160 & XXS 115⁄ 16 21⁄ 16 25⁄ 16 29⁄ 16
STD & XS 19⁄ 16 19⁄ 16 111⁄ 16 111⁄ 16 113⁄ 16 2 23⁄ 16 2 1⁄ 4
11⁄ 2
S 160 & XXS 21⁄ 16 23⁄ 16 27⁄ 16 211⁄ 16 215⁄ 16
STD & XS 113⁄ 16 113⁄ 16 115⁄ 16 115⁄ 16 21⁄ 16 2 1⁄ 4 27⁄ 16 2 1⁄ 2 111⁄ 16
2
S 160 & XXS 2 ⁄ 16
5
2 ⁄ 16 2 ⁄ 16 2 ⁄ 16 3 ⁄ 16
7 11 15 3
3 3⁄ 8
STD & XS 2 ⁄ 16 2 ⁄ 16 2 ⁄ 16
1 1 3
2 ⁄ 16
3
2 ⁄ 16
5
2 ⁄2
1
2 ⁄ 16
11
2 ⁄4
3
215⁄ 16 31⁄ 16
21⁄ 2
S 160 & XXS 2 ⁄ 16 2 ⁄ 16 2 ⁄ 16 3 ⁄ 16 3 ⁄ 16
9 11 15 3 7
3 5⁄ 8 3 7⁄ 8
STD & XS 2 ⁄8
3
2 ⁄8
3
2 ⁄2
1
2 ⁄2
1
2 ⁄8
5
2 ⁄ 16
13
3 3 ⁄ 16
1
3 ⁄4
1
3 3⁄ 8 3 1⁄ 2
3
S 160 & XXS 2 ⁄8
7
3 3 ⁄4
1
3 ⁄2
1
3 ⁄4
3
3 ⁄ 16 4 ⁄ 16
15 3
4 5⁄ 8
1
3 ⁄2 STD & XS 2 ⁄8
5
2 ⁄8
5
2 ⁄4
3
2 ⁄4
3
2 ⁄8
7
3 ⁄ 16
1
3 ⁄4
1
3 ⁄ 16
5
3 ⁄2
1
3 ⁄8
5
3 3⁄ 4 3 7⁄ 8
STD & XS 2 ⁄8
7
2 ⁄8
7
3 3 3 ⁄8
1
3 ⁄ 16
5
3 ⁄2
1
3 ⁄ 16
9
3 ⁄4
3
3 ⁄8
7
4 4 1⁄ 8 4 1⁄ 4
4
S 160 & XXS 3 ⁄8
3
3 ⁄2
1
3 ⁄4
3
4 4 ⁄4
1
4 ⁄ 16 4 ⁄ 16
7 11
5 ⁄8
1
— 59⁄ 16
STD & XS 3 ⁄ 16 3 ⁄ 16 3 ⁄ 16
7 7 9
3 ⁄ 16 3 ⁄ 16
9 11
3 ⁄8
7
4 ⁄ 16
1
4 ⁄8
1
4 ⁄ 16
5
4 ⁄ 16
7
4 ⁄ 16 4 ⁄ 16 413⁄ 16 51⁄ 16
9 11
5
S 160 & XXS 315⁄ 16 41⁄ 16 45⁄ 16 49⁄ 16 413⁄ 16 5 5 1⁄ 4 511⁄ 16 — 6 1⁄ 8 6 1⁄ 2
STD 315⁄ 16 315⁄ 16 41⁄ 16 41⁄ 16 43⁄ 16 4 3⁄ 8 49⁄ 16 4 5⁄ 8 413⁄ 16 415⁄ 16 51⁄ 16 53⁄ 16 55⁄ 16 59⁄ 16 511⁄ 16
6 XS 315⁄ 16 315⁄ 16 41⁄ 16 41⁄ 16 43⁄ 16 4 3⁄ 8 49⁄ 16 4 5⁄ 8 413⁄ 16 415⁄ 16 51⁄ 16 53⁄ 16 55⁄ 16 59⁄ 16 63⁄ 8
S 160 & XXS 47⁄ 16 49⁄ 16 413⁄ 16 51⁄ 16 55⁄ 16 5 1⁄ 2 5 3⁄ 4 63⁄ 16 — 6 5⁄ 8 7 77⁄ 16
STD 4 ⁄ 16 4 ⁄ 16 5 ⁄ 16
15 15 1
5 ⁄ 16
1
5 ⁄ 16
3
5 ⁄8
3
5 ⁄ 16
9
5 ⁄8
5
5 ⁄ 16 5 ⁄ 16 6 ⁄ 16
13 15 1
6 ⁄ 16 6 ⁄ 16 6 ⁄ 16 611⁄ 16 71⁄ 16
3 5 9
8
XS 4 ⁄ 16 4 ⁄ 16 5 ⁄ 16
15 15 1
5 ⁄ 16
1
5 ⁄ 16
3
5 ⁄8
3
5 ⁄ 16
9
5 ⁄8
5
5 ⁄ 16 5 ⁄ 16 6 ⁄ 16
13 15 1
63⁄ 16 65⁄ 16 69⁄ 16 73⁄ 8 83⁄ 16
STD 6 6 6 ⁄8
1
6 ⁄8
1
6 ⁄4
1
6 ⁄ 16
7
6 ⁄8
5
6 ⁄ 16
11
6 ⁄8
7
7 7 ⁄8
1
7 1⁄ 4 7 3⁄ 8 7 5⁄ 8 7 3⁄ 4 8 1⁄ 8 87⁄ 16
10
XS 6 6 6 ⁄8
1
6 ⁄8
1
6 ⁄4
1
6 ⁄ 16
7
6 ⁄8
5
6 ⁄ 16
11
6 ⁄8
7
7 7 ⁄8
1
7 ⁄4
1
7 ⁄ 8 7 ⁄ 8 8 ⁄ 16 9 ⁄ 4
3 5 7 1
9 1⁄ 8
STD 7 7 7 ⁄8
1
7 ⁄8
1
7 ⁄4
1
7 ⁄ 16
7
7 ⁄8
5
7 ⁄ 16
11
7 ⁄8
7
8 8 ⁄8
1
8 ⁄4
1
8 ⁄8 8 ⁄8
3 5
8 ⁄4
3
9 ⁄8
1
97⁄ 16 9 3⁄ 4
12
XS 7 7 7 ⁄8
1
7 ⁄8
1
7 ⁄4
1
7 ⁄ 16
7
7 ⁄8
5
7 ⁄ 16
11
7 ⁄8
7
8 8 ⁄8
1
8 ⁄4
1
8 ⁄ 8 8 ⁄ 8 9 ⁄ 16 10 ⁄ 4 10 ⁄ 16 105⁄ 16
3 5 7 1 1
STD 7 ⁄8
5
7 ⁄8
5
7 ⁄4
3
7 ⁄4
3
7 ⁄8
7
8 ⁄ 16
1
8 ⁄4
1
8 ⁄ 16
5
8 ⁄2
1
8 ⁄8
5
8 ⁄4
3
8 ⁄8
7
9 9 1⁄ 4 9 3⁄ 8 93⁄ 4 101⁄ 16 103⁄ 8 101⁄ 2
14
XS 7 ⁄8
5
7 ⁄8
5
7 ⁄4
3
7 ⁄4
3
7 ⁄8
7
8 ⁄ 16
1
8 ⁄4
1
8 ⁄ 16
5
8 ⁄2
1
8 ⁄8
5
8 ⁄4
3
8 ⁄8
7
9 9 ⁄ 4 10 ⁄ 16 10 ⁄ 8 10 ⁄ 16 11 ⁄ 16
1 1 7 11 1
111⁄ 8
STD 8 5⁄ 8 8 5⁄ 8 8 3⁄ 4 8 3⁄ 4 8 7⁄ 8 91⁄ 16 9 1⁄ 4 95⁄ 16 9 1⁄ 2 9 5⁄ 8 9 3⁄ 4 9 7⁄ 8 10 101⁄ 4 103⁄ 8 103⁄ 4 111⁄ 16 113⁄ 8 111⁄ 2 1111⁄ 16
16
XS 8 5⁄ 8 8 5⁄ 8 8 3⁄ 4 8 3⁄ 4 8 7⁄ 8 91⁄ 16 9 1⁄ 4 95⁄ 16 9 1⁄ 2 9 5⁄ 8 9 3⁄ 4 9 7⁄ 8 10 101⁄ 4 111⁄ 16 117⁄ 8 1111⁄ 16 121⁄ 16 1115⁄ 16 127⁄ 16
STD 9 5⁄ 8 9 5⁄ 8 9 3⁄ 4 9 3⁄ 4 97⁄ 8 101⁄ 16 101⁄ 4 105⁄ 16 101⁄ 2 105⁄ 8 103⁄ 4 107⁄ 8 11 111⁄ 4 113⁄ 8 113⁄ 4 121⁄ 16 123⁄ 8 121⁄ 2 1211⁄ 16 131⁄ 16
18
XS 9 5⁄ 8 9 5⁄ 8 9 3⁄ 4 9 3⁄ 4 97⁄ 8 101⁄ 16 101⁄ 4 105⁄ 16 101⁄ 2 105⁄ 8 103⁄ 4 107⁄ 8 11 111⁄ 4 121⁄ 16 127⁄ 8 1211⁄ 16 131⁄ 16 1215⁄ 16 133⁄ 16 1311⁄ 16
STD 105⁄ 8 105⁄ 8 103⁄ 4 103⁄ 4 107⁄ 8 111⁄ 16 111⁄ 4 115⁄ 16 111⁄ 2 115⁄ 8 113⁄ 4 117⁄ 8 12 121⁄ 4 123⁄ 8 123⁄ 4 131⁄ 16 133⁄ 8 131⁄ 2 1311⁄ 16 1313⁄ 16 145⁄ 8
20
XS 10 ⁄ 8 10 ⁄ 8 10 ⁄ 4 10 ⁄ 4 10 ⁄ 8 11 ⁄ 16 11 ⁄ 4 11 ⁄ 16 11 ⁄ 2 11 ⁄ 8 11 ⁄ 4 11 ⁄ 8
5 5 3 3 7 1 1 5 1 5 3 7
12 12 ⁄ 4 13 ⁄ 16 13 ⁄ 8 13 ⁄ 16 14 ⁄ 16 13 ⁄ 16 14 ⁄ 16
1 1 7 11 1 15 3
14 ⁄ 8
3
15
STD 125⁄ 8 125⁄ 8 123⁄ 4 123⁄ 4 127⁄ 8 131⁄ 16 131⁄ 4 135⁄ 16 131⁄ 2 135⁄ 8 133⁄ 4 137⁄ 8 14 141⁄ 4 143⁄ 8 143⁄ 4 151⁄ 16 153⁄ 8 151⁄ 2 1511⁄ 16 1513⁄ 16 16 173⁄ 8
24
XS 12 ⁄ 8 12 ⁄ 8 12 ⁄ 4 12 ⁄ 4 12 ⁄ 8 13 ⁄ 16 13 ⁄ 4 13 ⁄ 16 13 ⁄ 2 13 ⁄ 8 13 ⁄ 4 13 ⁄ 8
5 5 3 3 7 1 1 5 1 5 3 7
14 14 ⁄ 4 15 ⁄ 16 15 ⁄ 8 15 ⁄ 16 16 ⁄ 16 15 ⁄ 16 16 ⁄ 16
1 1 7 11 1 15 3
16 ⁄ 8
3
16 ⁄ 16 171⁄ 2
11
PF – 36
Buttweld Anvilets - Dimension “H”*(DN)
*Dimension ‘H’ is the distance in inches from the center of the run pipe to the
BRANCH
face of the Anvilet. The weld or root gap is not included in the ‘H’ dimension PIPE
below.
Dimension ‘H’ is also indicated on the diagrams shown on page PF-35 and
ROOT
page PF-36.
GAP
H*
RUN
C PIPE
Nominal OUTLET SIZES (DN)

Pipe
Run Pipe
Weight or
Size 6 8 10 15 20 25 32 40 50 65 80 90 100 125 150 200 250 300 350 400 450 500 600
Sch. No.
(DN)
10 STD & XS 25 25
STD & XS 27 27 30 30
15
S 160 & XXS 38
STD & XS 30 30 32 32 37
20
S 160 & XXS 41 44
STD & XS 33 33 35 35 38 43
25
S 160 & XXS 44 48 54
STD & XS 37 37 40 40 43 48 52
32
S 160 & XXS 49 52 59 65
STD & XS 40 40 43 43 46 51 56 57
40
S 160 & XXS 52 56 62 68 75
STD & XS 46 46 49 49 52 57 62 64 43
50
S 160 & XXS 59 62 68 75 81 86
STD & XS 52 52 56 56 59 64 68 70 75 78
65
S 160 & XXS 65 68 75 81 87 92 98
STD & XS 60 60 64 64 67 71 76 78 83 86 89
80
S 160 & XXS 73 76 83 89 95 100 106 117
90 STD & XS 67 67 70 70 73 78 83 84 89 92 95 98
STD & XS 73 73 76 76 79 84 89 90 95 98 102 105 108
100
S 160 & XXS 86 89 95 102 108 113 119 130 — 141
STD & XS 87 87 90 90 94 98 103 105 110 113 116 119 122 129
125
S 160 & XXS 100 103 110 116 122 127 133 144 — 156 165
STD 100 100 103 103 106 111 116 117 122 125 129 132 135 141 144
150 XS 100 100 103 103 106 111 116 117 122 125 129 132 135 141 162
S 160 & XXS 113 116 122 129 135 140 146 157 — 168 178 189
STD 125 125 129 129 132 137 141 143 148 151 154 157 160 167 170 179
200
XS 125 125 129 129 132 137 141 143 148 151 154 157 160 167 187 208
STD 152 152 156 156 159 164 168 170 175 178 181 184 187 194 197 206 214
250
XS 152 152 156 156 159 164 168 170 175 178 181 184 187 194 214 235 232
STD 178 178 181 181 184 189 194 195 200 203 206 210 213 219 222 232 240 248
300
XS 178 178 181 181 184 189 194 195 200 203 206 210 213 219 240 260 256 262
STD 194 194 197 197 200 205 210 211 216 219 222 225 229 235 238 248 256 264 267
350
XS 194 194 197 197 200 205 210 211 216 219 222 225 229 235 256 276 271 281 283
STD 219 219 222 222 225 230 235 237 241 244 248 251 254 260 264 273 281 289 292 297
400
XS 219 219 222 222 225 230 235 237 241 244 248 251 254 260 281 302 297 306 303 316
STD 244 244 248 248 251 256 260 262 267 270 273 276 279 286 289 298 306 314 318 322 332
450
XS 244 244 248 248 251 256 260 262 267 270 273 276 279 286 306 327 322 332 329 335 348
STD 270 270 273 273 276 281 286 49 292 295 298 302 305 311 314 324 332 340 343 348 351 371
500
XS 270 270 273 273 276 281 286 49 292 295 298 302 305 311 332 352 348 357 354 360 365 381
STD 321 321 324 324 327 332 337 338 343 346 349 352 356 362 365 375 383 391 394 398 402 406 441
600
XS 321 321 324 324 327 332 337 338 343 346 349 352 356 362 383 403 398 408 405 411 416 424 445
PF – 37
Buttweld Anvilets
Full and Reducing Sizes Sch. 160 & XXS
C
1
See page PF-36 for “H” dimensions
Outlet Size A C Weight

BRANCH
NPS DN in mm in mm lbs kg PIPE
1
⁄2 15 11⁄8 29 9
⁄16 14 0.25 0.11
3 1 3
⁄4 20 1 ⁄4 32 ⁄4 19 0.71 0.32
1 25 11⁄2 38 1 25 0.83 0.38
11⁄4 32 13⁄4 44 15⁄16 33 1.3 0.57
11⁄2 40 2 51 11⁄2 38 1.8 0.79
2 50 23⁄16 56 111⁄16 43 2.1 1.0 H1
1 7 1
2 ⁄2 65 2 ⁄16 62 2 ⁄8 54 3.4 1.5
3 80 27⁄8 73 27⁄8 73 6.3 2.9
4 100 35⁄16 84 37⁄8 98 11 4.8
5 125 311⁄16 94 413⁄16 124 14 6.5
1
6 150 4 ⁄8 105 53⁄4 146 30 13
The reducing Anvilets listed above for outlet sizes ⁄ 2 - 2 NPS (15 - 50 DN) are supplied in
1 Schedule 160 and Double Extra Strong buttweld Anvilets may be used in conjunction with
several different ranges of run pipe size for each outlet size. Please refer to run pipe size Class 6000 fittings.
chart on page PF-34.
Flat Anvilets – Class 3000 Threaded, Buttweld & Socket-Weld

Size A Weight Illustration
NPS DN in mm lbs kg
1 11
⁄4 8 ⁄16 17 0.11 0.05 THREADED
3 13
⁄8 10 ⁄16 22 0.20 0.09
A
1
⁄2 15 1 25 0.30 0.14
3
⁄4 20 11⁄16 27 0.40 0.18
BUTT-WELD
1 25 19⁄32 33 0.70 0.32
11⁄4 32 111⁄32 34 0.90 0.41

A
11⁄2 40 13⁄8 35 1.2 0.54
2 50 11⁄2 38 1.8 0.82 SOCKET-WELD
21⁄2 65 13⁄4 44 2.7 1.2

A
3 80 2 51 3.3 1.5
Flat Anvilets are designed to facilitate welding to a flat surface for the installation of Class 6000 flat Anvilets are available on application.
branch pipes or fittings.
PF – 38
Socket-Weld Anvilets
Full and Reducing Sizes Class 3000 and 6000
E
F
BRANCH
PIPE
D1
C
B
RUN
PIPE
Class 3000 Reducing and Full Sizes

Nominal
Outlet Size A B C D ±.03 E ±.01 -.00 F Weight
Run Pipe Size
NPS DN NPS DN in mm in mm in mm in mm in mm in mm lbs kg
1 5 15
1
⁄2 15 1 25 ⁄8 16 ⁄16 24 0.622 16 0.855 22 11⁄4 32 0.20 0.09
⁄2 15 3 15 15
⁄4 - 36 20 - 900 1 25 ⁄16 24 ⁄16 24 0.622 16 0.855 22 11⁄4 32 0.35 0.16
3 1 13 3
3
⁄4 20 1 ⁄16 27 ⁄16 22 1 ⁄16 30 0.824 21 1.065 27 17⁄16 37 0.27 0.12
⁄4 20
1-36 25 - 900 11⁄16 27 13⁄16 30 13⁄16 30 0.824 21 1.065 27 17⁄16 37 0.40 0.18
1 25 15⁄16 33 11⁄16 27 17⁄16 37 1.049 27 1.330 34 113⁄16 47 0.60 0.27
1 25 1 5 7 7 13
1 ⁄4 - 36 32 - 900 1 ⁄16 33 1 ⁄16 37 1 ⁄16 37 1.049 27 1.330 34 1 ⁄16 47 0.80 0.36
11⁄4 32 15⁄16 33 13⁄8 35 13⁄4 44 1.380 35 1.675 43 23⁄16 56 0.80 0.36
11⁄4 32
11⁄2 - 36 40 - 900 15⁄16 33 13⁄4 44 13⁄4 44 1.380 35 1.675 43 23⁄16 56 1.1 0.50
1 3 5 7
1 ⁄2 40 1 ⁄8 35 1 ⁄8 41 2 51 1.610 41 1.915 49 2 ⁄16 62 1.2 0.54
11⁄2 40 3 7
2-36 50 - 900 1 ⁄8 35 2 51 2 51 1.610 41 1.915 49 2 ⁄16 62 1.5 0.68
2 50 11⁄2 38 21⁄16 52 29⁄16 65 2.067 53 2.406 61 215⁄16 75 1.8 0.82
2 50
21⁄2 - 36 65 - 900 11⁄2 38 29⁄16 65 29⁄16 65 2.067 53 2.406 61 215⁄16 75 2.0 0.91
1 9 1 7
2 ⁄2 65 1 ⁄16 40 2 ⁄2 64 3 76 2.469 63 2.906 74 3 ⁄16 87 2.5 1.1
21⁄2 65 9 7
3-36 80 - 900 1 ⁄16 40 3 76 3 76 2.469 63 2.906 74 3 ⁄16 87 3.0 1.4
3 80 13⁄4 44 31⁄16 78 311⁄16 94 3.068 78 3.535 90 41⁄8 105 3.8 1.7
3 80
31⁄2 - 36 90 - 900 13⁄4 44 311⁄16 94 311⁄16 94 3.068 78 3.535 90 41⁄8 105 4.2 1.9
1 1 9 13
3 ⁄2 90 2 ⁄8 54 3 ⁄16 90 4 102 3.548 90 4.040 103 4 ⁄16 124 4.3 2.0
31⁄2 90
4-36 100 - 900 21⁄8 54 4 102 4 102 3.548 90 4.040 103 413⁄16 124 4.3 2.0
4 100 17⁄8 48 41⁄16 103 43⁄4 121 4.026 102 4.545 115 51⁄8 130 7.2 3.3
4 100
5-36 125 - 900 17⁄8 48 43⁄4 121 43⁄4 121 4.026 102 4.545 115 51⁄8 130 8.0 3.6
Class 6000 Reducing Sizes (Full sizes not available)

Nominal
Outlet Size A B C D ±.03 E ±.01 -.00 F
Run Pipe Size
NPS DN NPS DN in mm in mm in mm in mm in mm in mm
1 3
⁄2 15 ⁄4 - 36 20 - 900 11⁄4 32 3
⁄4 19 .464 12 .855 22 19⁄16 40 0.58 15
3 7 25
⁄4 20 1-36 25 - 900 1 ⁄16 37 1 25 .612 16 1.065 27 1 ⁄32 45 0.90 23
1 25 11⁄4 - 36 32 - 900 19⁄16 40 15⁄16 24 .815 21 1.330 34 21⁄4 57 1.8 46
11⁄4 32 11⁄2 - 36 40 - 900 15⁄8 41 11⁄2 38 1.160 29 1.675 43 29⁄16 65 2.6 66
1 11 15
1 ⁄2 40 2-36 50 - 900 1 ⁄16 43 1 ⁄16 49 1.338 34 1.915 49 3 76 3.0 76
1 1 3 5
2 50 2 ⁄2 - 36 65 - 900 2 ⁄16 52 2 ⁄4 70 1.687 43 2.406 61 3 ⁄8 92 5.8 147
Each outlet size of the reducing Anvilets listed above is supplied in several different Class 3000 socket-weld Anvilets may be used with Std. and XS pipe.
ranges of run pipe size. Please refer to the run pipe sizes chart on page PF-34.
Class 6000 socket-weld Anvilets may be used with Sch. 160 and XXS pipe.
NOTE: Tolerance on sizes 2 ⁄ 2 NPS (65 DN) and larger is ±.06.
1 1
PF – 39
Threaded Anvilets
Full and Reducing Size Class 3000 and 6000
BRANCH
PIPE
C
B
RUN
PIPE
Class 3000 Reducing and Full Sizes

Outlet Size Nominal Run Pipe Size A B C F Weight
NPS DN NPS DN in mm in mm in mm in mm lbs kg
1 5 15
1
⁄2 15 1 25 ⁄8 16 ⁄16 24 11⁄4 32 0.20 0.09
⁄2 15 3 15 15
⁄4 - 36 20 - 900 1 25 ⁄16 24 ⁄16 24 11⁄4 32 0.30 0.14
3 1 13 3
3
⁄4 20 1 ⁄16 27 ⁄16 22 1 ⁄16 30 17⁄16 37 0.35 0.16
⁄4 20
1- 36 25 - 900 11⁄16 27 13⁄16 30 13⁄16 30 17⁄16 37 0.42 0.19
5 1 7 13
1 25 1 ⁄16 33 1 ⁄16 27 1 ⁄16 37 1 ⁄16 47 0.60 0.27
1 25 1 5 7 7 13
1 ⁄4 - 36 32 - 900 1 ⁄16 33 1 ⁄16 37 1 ⁄16 37 1 ⁄16 47 0.80 0.36
11⁄4 32 15⁄16 33 13⁄8 35 13⁄4 44 23⁄16 56 0.85 0.39
11⁄4 32
11⁄2 - 36 40 - 900 15⁄16 33 13⁄4 44 13⁄4 44 23⁄16 56 1.2 0.54
1 3 5 7
1 ⁄2 40 1 ⁄8 35 1 ⁄8 41 2 51 2 ⁄16 62 1.3 0.59
11⁄2 40 3 7
2 - 36 50 - 900 1 ⁄8 35 2 51 2 51 2 ⁄16 62 1.6 0.73
2 50 11⁄2 38 21⁄16 52 29⁄16 65 215⁄16 75 1.7 0.77
2 50
21⁄2 - 36 65 - 900 11⁄2 38 29⁄16 65 29⁄16 65 215⁄16 75 2.2 1.0
1 13 1 7
2 ⁄2 65 1 ⁄16 47 2 ⁄2 64 3 76 3 ⁄16 87 2.5 1.1
21⁄2 65
3- 36 80 - 900 113⁄16 47 3 76 3 76 37⁄16 87 3.0 1.4
3 80 2 51 31⁄16 78 311⁄16 94 41⁄8 105 4.3 2.0
3 80
31⁄2 - 36 90 - 900 2 51 311⁄16 94 311⁄16 94 41⁄8 105 4.4 2.0
1 1 9 13
3 ⁄2 90 2 ⁄8 54 3 ⁄16 90 4 102 4 ⁄16 124 4.5 2.0
31⁄2 90
4 - 36 100 - 900 21⁄8 54 4 102 4 102 413⁄16 124 5.6 2.5
4 100 21⁄4 57 41⁄16 103 43⁄4 121 51⁄8 130 7.3 3.3
4 100 1 3 3 1
5 - 30 125 - 900 2 ⁄4 57 4 ⁄4 121 4 ⁄4 121 5 ⁄8 130 8.3 3.8
Class 6000 Reducing Sizes (Full sizes not available)

Outlet Size Nominal Run Pipe Size A B C F Weight
1 3 1 3 3 9
⁄2 15 ⁄4 - 36 20 - 900 1 ⁄4 32 ⁄4 19 ⁄4 19 1 ⁄16 40 0.60 0.27
3
⁄4 20 1 - 36 25 - 900 17⁄16 37 1 25 1 25 113⁄16 47 0.90 0.41
1 25 11⁄4 - 36 32 - 900 19⁄16 40 15⁄16 24 15⁄16 24 21⁄4 57 2.0 0.91
1 1 9 1 1 9
1 ⁄4 32 1 ⁄2 - 36 40 - 900 1 ⁄16 40 1 ⁄2 38 1 ⁄2 38 2 ⁄16 65 3.0 1.4
1 11 15 15
1 ⁄2 40 2 - 36 50 - 900 1 ⁄16 43 1 ⁄16 49 1 ⁄16 49 3 76 3.2 1.5
2 50 21⁄2 - 36 65 - 900 21⁄16 52 23⁄4 70 23⁄4 70 35⁄8 92 6.0 2.7
Each outlet size of the reducing Anvilets listed above is supplied in several different CLASS 6000 threaded Anvilets are manufactured only in the sizes shown and may be
ranges of run pipe size. Please refer to the run pipe sizes chart on page PF-34. used with Sch. 160 and XXS pipe.
CLASS 3000 threaded Anvilets may be used with standard and XS pipe.
PF – 40
Elbow Anvilets
Class 3000 and 6000 Buttweld, Threaded and Socket-Weld
THREADED SOCKET WELD

BUTTWELD
H
Class 3000 Threaded and Socket-Weld/standard and XS/XH Buttweld

Outlet Size Nom. Elbow Size C H Weight
NPS DN NPS DN in mm in mm lbs kg
1
⁄4 8 36-11⁄4 900 - 32 11⁄2 38 119⁄32 40 0.50 0.23
3
⁄8 10 36-11⁄4 900 - 32 11⁄2 38 119⁄32 40 0.50 0.23
1 1 1
⁄2 15 36-1 ⁄4 900 - 32 1 ⁄2 38 119⁄32 40 0.65 0.29
3
⁄4 20 36-11⁄4 900 - 32 123⁄32 44 17⁄8 48 0.75 0.34
1 25 36-2 900 - 50 21⁄8 54 23⁄16 56 1.1 0.52
1 21 3
1 ⁄4 32 36-2 900 - 50 1 ⁄32 42 2 ⁄8 60 1.9 0.86
11⁄2 40 36-2 900 - 50 3 76 25⁄8 67 2.6 1.2
2 50 36-3 900 - 50 41⁄8 105 33⁄16 81 5.3 2.4
Standard and XS/XH Buttweld, Only

Outlet Size Nom. Elbow Size C H Weight
1 3 1
2 ⁄2 65 As specified As specified 4 ⁄16 106 3 ⁄4 83 5.5 2.5
15 13
3 80 As specified As specified 4 ⁄16 125 3 ⁄16 98 6.3 2.8
4 100 As specified As specified 67⁄16 164 41⁄2 114 12 5.3
6 150 As specified As specified 9 229 63⁄16 157 28 13
Class 6000 Threaded and Socket-Weld/Sch. 160 and XXS/XXH Buttweld

Outlet Size Nom. Elbow Size ) C H Weight
1 1 3 19
⁄4 8 36-1 ⁄4 900 - 32 1 ⁄8 35 1 ⁄32 40 0.75 0.34
3
⁄8 10 36-11⁄4 900 - 32 13⁄8 35 119⁄32 40 0.75 0.34
1 1 23
⁄2 15 36-1 ⁄4 900 - 32 1 ⁄32 44 17⁄8 48 0.85 0.39
3
⁄4 20 36-2 900 - 50 21⁄8 54 23⁄16 56 1.3 0.57
1 25 36-2 900 - 50 221⁄32 67 23⁄8 60 2.2 1.0
1
1 ⁄4 32 36-2 900 - 50 3 76 25⁄8 67 3.9 1.8
11⁄2 40 36-3 900 - 50 41⁄8 105 33⁄16 81 6.2 2.8
Elbow Anvilets are welded to 90° long radius elbows as branch connections for pipes and fittings.
They are also used as pipe hanger or support bosses.
PF – 41
Lateral Anvilets
Class 3000 and 6000 Buttweld, Threaded and Socket-Weld
Lateral Anvilets provide a strong, readily

attached 45° lateral outlet connection
45°
H
C
B
BUTTWELD SOCKET WELD

THREADED
Class 3000 Threaded and Socket-Weld/standard and XS/XH Buttweld

Outlet Size Nominal Run Pipe Size H B C Weight
NPS DN NPS DN in mm in mm in mm lbs kg
1
⁄4 8 21⁄2-11⁄4 / 12-3 65 - 32 / 300 - 80 11⁄2 38 21⁄4 57 17⁄16 37 0.50 0.23
3 1 1 1 1 7
⁄8 10 2 ⁄2-1 ⁄4 / 12-3 65 - 32 / 300 - 80 1 ⁄2 38 2 ⁄4 57 1 ⁄16 37 0.50 0.23
1 1 1 1 1 7
⁄2 15 2 ⁄2-1 ⁄4 / 12-3 65 - 32 / 300 - 80 1 ⁄2 38 2 ⁄4 57 1 ⁄16 37 0.65 0.29
3
⁄4 20 11⁄2-11⁄4 / 5-2 / 12-6 40 - 32 / 125 - 50 / 300 - 150 113⁄16 47 23⁄4 70 123⁄32 44 0.75 0.34
1 25 21⁄2-2 / 5-3 / 12-6 65 - 50 / 125 - 80 / 300 - 150 21⁄8 54 31⁄4 83 21⁄8 54 1.1 0.52
1 1 9 13 21
1 ⁄4 32 2 ⁄2-2 / 5-3 / 12-6 65 - 50 / 125 - 80 / 300 - 150 2 ⁄16 65 3 ⁄16 98 2 ⁄32 67 1.9 0.86
11⁄2 40 21⁄2-2 / 5-3 / 12-6 65 - 50 / 125 - 80 / 300 - 150 23⁄4 70 41⁄4 108 3 76 2.6 1.2
2 50 5-4 / 8-6 / 12-10 125 - 100 / 200 - 150 / 300 - 150 33⁄8 86 53⁄8 137 41⁄8 105 5.3 2.4
Class 6000 Threaded and Socket-Weld/Sch. 160 and XXS/XXH Buttweld

Outlet Size Nominal Run Pipe Size H B C Weight
NPS DN NPS DN in mm in mm in mm lbs kg
1
⁄4 8 21⁄2-11⁄4 /12-3 65 - 32 / 300 - 80 11⁄2 38 21⁄4 57 13⁄8 35 0.75 0.34
3
⁄8 10 21⁄2-11⁄4 /12-3 65 - 32 / 300 - 80 11⁄2 38 21⁄4 57 13⁄8 35 0.75 0.34
1 1 1 13 3
⁄2 15 1 ⁄2-1 ⁄4 / 5-2 /12-6 40 - 32 / 125 - 50 / 300 - 150 1 ⁄16 47 2 ⁄4 70 123⁄32 44 0.85 0.39
3
⁄4 20 21⁄2-2 / 5-3 / 12-6 65 - 50 / 125 - 80 / 300 - 150 21⁄8 54 31⁄4 83 21⁄8 54 1.3 0.57
1 9 13 21
1 25 2 ⁄2-2 / 5-3 / 12-6 65 - 50 / 125 - 80 / 300 - 150 2 ⁄16 65 3 ⁄16 98 2 ⁄32 67 2.2 1.0
1 1 3 1
1 ⁄4 32 2 ⁄2-2 / 5-3 / 12-6 65 - 50 / 125 - 80 / 300 - 150 2 ⁄4 70 4 ⁄4 108 3 76 2.9 1.3
11⁄2 40 5-4 / 8-6 / 12-10 125 - 100 / 200 - 150 / 300 - 150 33⁄8 86 53⁄8 137 41⁄8 105 6.2 2.8
PF – 42
Forged Steel Unions
A A D
Manufactured to MSS standard practice SP83

C F
B C (Class 6000 by method of MSS SP83)
B
Threaded Socket-Weld
Class 3000
Threaded - Figure 2125 Socket-Weld - Figure 2126
Size A B C* D E F Weight
NPS DN in mm in mm in mm in mm in mm in mm lbs kg
1 11 31 53 25 7 0.420 11
⁄8 6 1 ⁄16 43 1 ⁄64 38 ⁄64 21 ⁄32 20 ⁄16 11 0.38 0.17
0.440 11
1 0.555 14
⁄4 8 111⁄16 43 131⁄64 38 53
⁄64 21 25
⁄32 20 7
⁄16 11 0.36 0.16
0.575 15
3 0.690 18
⁄8 10 127⁄32 47 111⁄16 43 1 25 31
⁄32 25 7
⁄16 11 0.50 0.23
0.710 18
1 0.855 22
⁄2 15 2 51 115⁄16 49 13⁄16 30 13⁄32 28 7
⁄16 11 0.69 0.32
0.875 22
3 1.065 27
⁄4 20 25⁄16 59 23⁄8 60 115⁄32 37 15⁄32 29 9
⁄16 14 1.2 0.53
1.085 28
1.330 34
1 25 27⁄16 62 225⁄32 71 125⁄32 45 13⁄8 35 9
⁄16 14 1.6 0.74
1.350 34
1.675 43
11⁄4 32 27⁄8 73 323⁄64 85 27⁄32 686 145⁄64 43 9
⁄16 14 2.6 1.2
1.695 43
1.915 49
11⁄2 40 3 76 323⁄64 85 235⁄64 65 17⁄8 48 9
⁄16 14 3.4 1.5
1.935 49
2.406 61
2 50 31⁄2 89 427⁄64 112 31⁄16 78 21⁄16 52 11
⁄16 17 5.1 2.3
2.426 62
2.906 74
21⁄2 65 41⁄4 108 515⁄64 133 39⁄16 90 23⁄8 60 7
⁄8 22 8.8 4.0
2.931 74
3.535 90
3 80 47⁄16 113 65⁄32 156 49⁄32 109 27⁄16 62 1 25 13 5.7
3.560 90
Class 6000
Threaded - Figure 2127 Socket-Weld - Figure 2128
Size A B C* D E F Weight
1 11 31 53 25 7 0.420 11
⁄8 6 1 ⁄16 43 1 ⁄64 38 ⁄64 21 ⁄32 20 ⁄16 11 0.50 0.23
0.440 11
1 0.555 14
⁄4 8 127⁄32 47 111⁄16 43 1 25 31
⁄32 25 7
⁄16 11 0.56 0.25
0.575 15
3 0.690 18
⁄8 10 2 51 115⁄16 49 13⁄16 30 13⁄32 28 7
⁄16 11 0.75 0.34
0.710 18
1 0.855 22
⁄2 15 25⁄16 59 23⁄8 60 115⁄32 37 15⁄32 29 9
⁄16 14 1.3 0.57
0.875 22
3 1.065 27
⁄4 20 27⁄16 62 225⁄32 71 125⁄32 45 13⁄8 35 9
⁄16 14 1.8 0.79
1.085 28
1.330 34
1 25 27⁄8 73 323⁄64 85 27⁄32 686 145⁄64 43 9
⁄16 14 3.0 1.4
1.350 34
1.675 43
11⁄4 32 3 76 323⁄32 94 235⁄64 65 17⁄8 48 9
⁄16 14 3.8 1.7
1.695 43
1.915 49
11⁄2 40 31⁄2 89 427⁄64 112 31⁄16 78 21⁄16 52 11
⁄16 17 6.0 2.7
1.935 49
2.406 61
2 50 41⁄8 105 515⁄64 133 39⁄16 90 23⁄8 60 7
⁄8 22 11 4.8
2.426 62
*“C” dimension measures across octagon corners or across the diameter as applicable. The 21 ⁄ 2 " NPS (65 DN) and 3" NPS (80 DN) - 3000 and 2" NPS (50 DN) - 6000 sizes have
octagonal male and female ends; the other sizes are round.
PF – 43
Forged Steel Unions
Lug Nut Unions

Lug Nut Unions
Lug Nut Unions have modified Stub-Acme threads and are ideal for
applications requiring rapid assembly and/or breakdown. Size A
Other features of the Lug Nut Union include: NPS DN in mm
❑ 3000 psi NSCWP 3
⁄8 10 1.950 50
❑ Threaded and socket-weld ends 1
⁄2 15 2.065 52
❑ Seating characteristics of AAR unions 3
⁄4 20 2.375 60
❑ Available in sizes 3⁄ 8 - 4 NPS (10 - 100 DN) 1 25 2.580 66
❑ Twin lugs in sizes up to 3⁄ 4 NPS (20 DN) 1
1 ⁄4 32 2.950 75
❑ Tri-lug design in sizes from 1 - 4 NPS (25 - 100 DN) 11⁄2 40 3.115 79
❑ Plated lug nut 2 50 3.575 91
1
2 ⁄2 65 4.200 107
3 80 4.475 114
4 100 8.500 216
PF – 44
Steel Fittings
Specification Nipples are available from stock in 1⁄ 8 - 8 NPS (6 - 200 DN)

Unless otherwise specified welded nipples ASTM A 53 are diameter, close to 12 NPS (300 DN) in length. Sizes 13 - 24 NPS
furnished on orders for steel nipples in standard and extra strong (325 - 600 DN) (Prices on application).
sizes 1⁄ 8 - 8 NPS. (6 - 200 DN)
Steel pipe nipples meet ASTM A733 and Federal Specification
Welded steel nipples (A 53 Type F or Type E) are available in WWN 351.
standard and extra strong sizes 1⁄ 8 - 8 NPS (6 - 200 DN), right hand Identification
threads, black or galvanized. Where possible, each seamless pipe nipple is identified with the
Seamless steel pressure tube nipples (ASTM A 106 Grade following:
B) are available in standard and extra strong sizes 1⁄ 8 - 8 NPS ❑ A trade mark
(6 - 200 DN) with right h and threads, black only.
❑ Seamless designation “SMLS”
Seamless steel pressure tube: seamless red brass nipples ❑ Pipe schedule STD, XS/XH, SCH 160 and XXS/XXH
(ASTM B 43). ❑ Material designation A106 B
Right and left steel nipples are available in standard weight ❑ Heat number for traceablity
sizes 1⁄ 4 - 2 NPS (8 - 50 DN), in 4" (102mm) length only, black
only. (Prices on application).
PF – 45
Steel Pipe Nipples ASTM A733
standard, Black: Figure 339

standard, Galvanized: Figure 343
Extra Strong, Black or Galvanized: Figure 338
Close Short or Long
Locknut Nipple standard: Figure 341
Locknut nipples are available in standard weight sizes 11⁄ 2 - 4 NPS (40 - 100 DN) diameter, in 8” (203mm) lengths,
black or galvanized, and threaded on one end only in NPSL straight pipe thread.Total thread length is 6" (152mm)
(plain end reamed).
Tank Nipple standard: Figure 341-A
Tank nipples are available in standard weight sizes 1⁄ 4 - 3 NPS (8 - 80 DN) in 6" (152mm) length only, black or galva-
nized.They have NPT thread on one end, and NPT thread running into NPSL thread on the other . (Total length: 4"
(102mm)).
End Finishes
Standard End Finish Special End Finishes
Straight Roller Cut

Pipe Furnished when specified
Thread on order. (Not deburred.)
Tapered Pipe Thread (NPT)

Furnished unless special
finish requested.
Reamed and Chamfered
End square cut and bevelled
Grooved on O.D. at 35° ±10° to axis.
Inside burrs removed.
Square Cut
End square cut to central axis.
All burrs removed.
(Special Pricing)
PF – 46
Standard Steel Merchant Couplings
Figure 336
Three-quarter section
Pipe and Coupling
Deep chamfer permits

easy assembly
Carton
Quantity
Outside Diameter Length Weight/100
Size Threads (Full
(Coupling) Coupling)
Full Half Full Half
Full Half
NPS DN in mm in mm in mm in mm lbs kg lbs kg
1 13 11
⁄8 6 .563 14 ⁄16 22 ⁄32 9 27 686 3.0 1.4 1.25 0.57 100 100
1
⁄4 8 .719 18 13⁄16 30 17
⁄32 13 18 457 7.25 3.3 3.25 1.5 100 100
3 3 17
⁄8 10 .875 22 1 ⁄16 30 ⁄32 13 18 457 9.5 4.3 4.25 1.9 100 100
1
⁄2 15 1.063 27 19⁄16 40 22
⁄32 17 14 356 17.5 7.9 8.0 3.6 100 100
3
⁄4 20 1.313 33 15⁄8 41 3
⁄4 19 14 356 26 12 12 5.4 50 100
15
1 25 1.576 40 2 51 ⁄16 24 111⁄2 292 42 19 20 9.1 30 75
1 1 31 1
1 ⁄4 32 1.900 48 2 ⁄16 52 ⁄32 25 11 ⁄2 292 50 23 23.5 11 25 100
11⁄2 40 2.200 56 21⁄16 52 31
⁄32 25 111⁄2 292 67 30 31.5 14 25 75
2 50 2.750 70 21⁄8 54 1 25 111⁄2 292 103 47 48.5 22 20 50
1 1 1
2 ⁄2 65 3.250 83 3 ⁄8 79 1 ⁄2 38 8 203 216 98 103.5 47 – –
1 9
3 80 4.000 102 3 ⁄4 83 1 ⁄16 40 8 203 347 157 167 76 – –
31⁄2 90 4.625 117 33⁄8 86 15⁄8 41 8 203 519 235 254 115 – –
4 100 5.000 127 31⁄2 89 111⁄16 43 8 203 488 221 235 107 – –
3 3
5 125 6.296 160 3 ⁄4 95 1 ⁄4 44 8 203 875 397 420 191 – –
7
6 150 7.390 188 4 102 1 ⁄8 48 8 203 1188 539 550 249 – –
❑ Manufactured in accordance with ASTM specification A865. ❑ Couplings 21⁄ 2 NPS (65 DN) and larger are phosphated.
❑ Merchant couplings in sizes 1⁄ 8 NPS (6 DN) through 2 NPS ❑ Galvanized full couplings are also available.
(50 DN) are normally supplied straight tapped. Sizes 21⁄ 2 NPS
(65 DN) and larger are taper tapped. Note
❑ Taper tapped standard merchant couplings in sizes 1⁄ 8 NPS (6 DN) ❑ Half couplings are chamfered on one end and squared on the
through 2 NPS (50 DN) are available upon request. other.
❑ API line pipe couplings are used in all sizes over 6 NPS(150 DN).
❑ Couplings from 1⁄ 8 NPS (6 DN) through 2 NPS (50 DN) are dipped
in rust preventative.
PF – 47
Standard Steel Merchant Couplings
Right & Left Steel Couplings
Figure 346
Half section
Pipe and
Coupling

easy assembly
Size Outside Diameter of Coupling Length Weight/100

NPS DN in mm in mm lbs kg
1 13
⁄8 6 .563 14 ⁄16 22 3.0 1.4
1 3
⁄4 8 .719 18 1 ⁄16 30 7.25 3.3
3
⁄8 10 .875 22 13⁄16 30 9.5 4.3
1
⁄2 15 1.063 27 19⁄16 40 17.5 7.9
3
⁄4 20 1.313 33 15⁄8 41 26 12
1 25 1.576 40 2 51 42 19
1 1
1 ⁄4 32 1.900 48 2 ⁄16 52 50 23
1 1
1 ⁄2 40 2.200 56 2 ⁄16 52 67 30
2 50 2.750 70 21⁄8 54 103 47
21⁄2 65 3.250 83 31⁄8 79 216 98
1
3 80 4.000 102 3 ⁄4 83 347 157
Note
❑ The left hand threaded end of all right and left couplings is
knurled for identification. All sizes of right and left couplings are
taper tapped 3⁄ 4" per foot (62.5mm per meter) on the diameter
and all are dipped in rust preventative.
PF – 48
Extra Strong (XS) Steel Couplings
Figure 337
Three-quarter section Deep chamfer permits

Pipe and Coupling easy assembly
Weight/100
Length Carton Quantity
Outside Diameter Non-Recessed
Size
of Coupling Recessed
Full Half Full Half
Full Half
NPS DN in mm in mm in mm lbs kg lbs kg lbs kg
1
⁄8 6 .563 14 11⁄16 27 15
⁄32 12 4.0 1.8 4.0 1.8 2.0 0.91 100 100
1 5 3
⁄4 8 .719 18 1 ⁄8 41 ⁄4 19 9.5 41 10.5 4.8 5.0 2.3 100 100
3
⁄8 10 .875 22 15⁄8 41 3
⁄4 19 13 5.9 14.3 6.5 6.5 2.9 100 100
1 1
⁄2 15 1.063 27 2 ⁄8 54 1 25 24 11 26 12 12.3 5.6 50 100
3
⁄4 20 1.313 33 21⁄8 54 1 25 35 16 38 17 17 7.7 50 100
1 25 1.576 40 25⁄8 67 11⁄4 32 51 23 82 37 38.5 17 25 50
11⁄4 32 2.054 52 23⁄4 70 15⁄16 33 101 46 108 49 50 23 25 70
1 3 5
1 ⁄2 40 2.200 56 2 ⁄4 70 1 ⁄16 33 88 40 98 44 49 22 20 55
2 50 2.875 73 27⁄8 73 13⁄8 35 184 83 195 88 95 43 15 35
21⁄2 65 3.375 86 41⁄8 105 2 51 327 148 363 165 175 79 – –
1 1
3 80 4.000 102 4 ⁄4 108 2 ⁄16 52 425 193 469 213 230 104 – –
1 3 1
3 ⁄2 90 4.625 117 4 ⁄8 111 2 ⁄8 54 581 264 653 296 319 145 – –
4 100 5.200 132 41⁄2 114 23⁄16 56 787 357 859 390 391 177 – –
5 125 6.296 160 45⁄8 117 21⁄4 57 1000 454 1097 498 550 249 – –
7 3
6 150 7.390 188 4 ⁄8 124 2 ⁄8 60 1381 626 1494 678 706 320 – –
1 9
8* 200 9.625 244 5 ⁄4 133 2 ⁄16 65 2318 1051 – – – – – –
10* 250 11.750 298 53⁄4 146 213⁄16 73 3155 1431 – – – – – –
12* 300 14.000 356 61⁄8 156 3 76 4927 2235 – – – – – –
* API line pipe coupling will be provided.
❑ Manufactured in accordance with ASTM Specification A865. ❑ Couplings 1⁄ 8 - 11⁄ 2 NPS (6 - 40 DN) are dipped in rust preventative.
❑ All sizes are taper tapped. ❑ Couplings 2 NPS (50 DN) and larger are phosphated.
❑ Non-recessed couplings will be supplied for sizes under 6 NPS ❑ Galvanized full couplings are also available.
unless otherwise specified.
❑ Couplings above 6 NPS (150 DN) will be supplied recessed only. Note
❑ Extra strong recessed couplings can be supplied in sizes ❑ Half couplings are chamfered on one end and squared on the
under 6 NPS (150 DN). other.
PF – 49
Extra Strong (XS) Right & Left Steel Couplings
Figure 347
Half section
Pipe and
Coupling

easy assembly

1 1
⁄8 6 .563 14 1 ⁄16 27 4.0 1.8
1
⁄4 8 .719 18 15⁄8 41 10.5 4.8
3
⁄8 10 .875 22 15⁄8 41 14.3 6.5
1 1
⁄2 15 1.063 27 2 ⁄8 54 26 12
3
⁄4 20 1.313 33 21⁄8 54 38 17
1 25 1.660 42 25⁄8 67 82 37
1 3
1 ⁄4 32 2.054 52 2 ⁄4 70 108 49
1 3
1 ⁄2 40 2.200 56 2 ⁄4 70 98 44
2 50 2.875 73 27⁄8 73 195 88
21⁄2 65 3.375 86 41⁄8 105 363 165
3 80 4.000 102 41⁄4 108 469 213
❑ The left hand threaded end of all right and left couplings is knurled
for identification, and all are dipped in rust preventative.
❑ Extra strong recessed right and left couplings are available on
request.
PF – 50
API Line Pipe Couplings
Figure 348
Pipe and Coupling
Detail of recess. Pipe thread covered

to last scratch (power tight)
12°
35°
Outside Diameter of
Size Length Weight/100 Carton
Coupling
Quantity
1 1
⁄8 6 .563 14 1 ⁄16 27 4.0 1.8 100
1
⁄4 8 .719 18 15⁄8 41 9.5 4.3 100
3 5
⁄8 10 .875 22 1 ⁄8 41 13 5.9 100
1 1
⁄2 15 1.063 27 2 ⁄8 54 24 11 50
3
⁄4 20 1.313 33 21⁄8 54 35 16 50
1 25 1.576 40 25⁄8 67 51 23 25
1 3
1 ⁄4 32 2.054 52 2 ⁄4 70 101 46 25
1 3
1 ⁄2 40 2.200 56 2 ⁄4 70 88 40 20
2 50 2.875 73 27⁄8 73 184 83 15
21⁄2 65 3.375 86 41⁄8 105 327 148 –
1
3 80 4.000 102 4 ⁄4 108 425 193 –
31⁄2 90 4.625 117 43⁄8 111 581 264 –
4 100 5.200 132 41⁄2 114 787 357 –
5 125 6.296 160 45⁄8 117 1000 454 –
7
6 150 7.390 188 4 ⁄8 124 1381 626 –
8 200 9.625 244 51⁄4 133 2318 1051 –
10 250 11.750 298 53⁄4 146 3155 1431 –
1
12 300 14.000 356 6 ⁄8 156 4927 2235 –
❑ These couplings are manufactured in accordance with American

Petroleum Institute Specification 5L.
❑ All sizes are taper tapped 3⁄ 4" per foot (62.5mm per meter)
on the diameter.
❑ Line pipe couplings in sizes 1⁄ 8 - 11⁄ 2 NPS (6 - 40 DN) are dipped in
rust preventative.
❑ Couplings in sizes 2 NPS (50 DN) and larger are phosphated.
PF – 51
AAR Class 300 Steel Couplings
Figure 349
Pipe and Coupling

easy assembly

1 5
⁄4 8 .719 18 1 ⁄8 41 9.0 4.1
3
⁄8 10 .875 22 15⁄8 41 14 6.4
1
⁄2 15 1.063 27 21⁄8 54 25 11
3 1
⁄4 20 1.313 33 2 ⁄8 54 36 16
1 25 1.576 40 25⁄8 67 74 34
11⁄4 32 2.054 52 23⁄4 70 108 49
11⁄2 40 2.200 56 23⁄4 70 95 43
7
2 50 2.875 73 2 ⁄8 73 201 91
21⁄2 65 3.375 86 41⁄8 105 353 160
3 80 4.000 102 41⁄4 108 461 209
❑ These couplings conform to the specifications of the Association

of American Railroads.
❑ All sizes are taper tapped 3⁄ 4" per foot (62.5mm per meter) on
diameter and are dipped in rust preventative.
PF – 52
Merchant Steel Plugs & Bushings
Solid Square Head Plugs

Hexagon Bushings
Minimum Nominal
Wt. per
Nominal Overall Width Nominal Width Wt. per
Threads 100 Carton Overall
Pipe Size Plug Across Pipe Across 100
Pieces Contents Length Carton
Length Flats Size Flats Pieces Contents
NPS DN in mm in mm in mm lbs kg NPS DN in mm in mm lbs kg
1 9
⁄8 6 .625 16 ⁄32 7 27 686 2.0 0.91 100 1
1 3
⁄ 4 x 1⁄ 8 8x6 .625 16 .625 16 2.0 0.91 100
⁄4 8 .687 17 ⁄8 10 18 457 2.0 0.91 100 3
3 7 ⁄ 8 x 1⁄ 8 10 x 6 .750 19 .687 17 5.0 2.3 100
⁄8 10 .812 21 ⁄16 11 18 457 5.0 2.3 100
3
1
⁄2 15 .937 24 9
⁄16 14 14 356 10.0 4.5 100 ⁄ 8 x 1⁄ 4 10 x 8 .750 19 .687 17 4.0 1.8 100
1
3
⁄4 20 1.062 27 5
⁄8 16 14 356 18 8.2 50 ⁄ 2 x 1⁄ 8 15 x 6 .875 22 .875 22 10.0 4.5 100
1
1 25 1.125 29 13
⁄16 22 111⁄2 292 35 16 25 ⁄ 2 x 1⁄ 4 15 x 8 .875 22 .875 22 9.0 4.1 100
1
⁄ 2 x 3⁄ 8 15 x 10 .875 22 .875 22 6.0 2.7 100
3
⁄ 4 x 1⁄ 8 20 x 6 1.000 25 1.062 27 20 9.1 100
3
⁄ 4 x 1⁄ 4 20 x 8 1.000 25 1.062 27 18 8.2 100
3
⁄ 4 x 3⁄ 8 20 x 10 1.000 25 1.062 27 15 6.8 100
Solid Hexagon Head Plugs 3
⁄ 4 x 1⁄ 2 20 x 15 1.000 25 1.062 27 11 5.0 100
1 x 1⁄ 8 25 x 6 1.062 27 1.375 35 42 19 50
1 x 1⁄ 4 25 x 8 1.062 27 1.375 35 35 16 50
Minimum Nominal 1 x 3⁄ 8 25 x 10 1.062 27 1.375 35 32 15 50

Wt. per 1 x 1⁄ 2 25 x 15 1.062 27 1.375 35 27 12 50
Nominal Overall Width
Threads 100 Carton 1 x 3⁄ 4 25 x 20 1.062 27 1.375 35 18 8.2 50
Pipe Size Plug Across
Pieces Contents
Length Flats
All sizes taper tapped 3 ⁄ 4 " per foot (62.5mm per meter) on diameter.
NPS DN in mm in mm in mm lbs kg Finish or Coating:
1 7
⁄8 6 0.56 14 ⁄ 16 11 27 686 3.0 1.4 100 ❑ Black, dipped in rust resistant;
1 9
⁄4 8 0.75 19 ⁄ 16 14 18 457 6.0 2.7 100
3 11
❑ Galvanized, zinc plated (inside and out).
⁄8 10 0.78 20 ⁄ 16 17 18 457 10.0 4.5 100 For sizes 11 ⁄ 4 (32 DN) and larger, see page PF-29.
1 7
⁄2 15 0.97 25 ⁄8 22 14 356 17 7.7 100
3 11
⁄4 20 1.06 27 ⁄ 16 17 14 356 32 15 50
Countersunk Plugs (Hex and Square Socket)
Nominal Min. Thread Min. Size of Socket Metal

Threads
Pipe Size Length Thickness Weight/100 Carton
Square Hex Bottom Contents
NPS DN in mm Countersink in mm lbs kg
1 3
⁄8 6 .37 9 — — ⁄16 5 .06 .06 27 686 1.00 0.45 100
1 1 1
⁄4 8 .44 11 ⁄4 6 ⁄4 6 .09 .09 18 457 1.00 0.45 100
3 5 5
⁄8 10 .48 12 ⁄16 8 ⁄16 8 .13 .13 18 457 4.0 1.8 100
1 3 3
⁄2 15 .56 14 ⁄8 10 ⁄8 10 .16 .16 14 356 6.0 2.7 100
3 1 9
⁄4 20 .63 16 ⁄2 8 ⁄16 14 .18 .18 14 356 11 5.0 50
1 5
1 25 .75 19 ⁄2 8 ⁄8 16 .20 .20 111⁄2 292 21 10 75
11⁄4 32 .80 20 3
⁄4 19 3
⁄4 19 .22 .22 111⁄2 292 34 15 50
11⁄2 40 .83 21 3
⁄4 19 1 25 .24 .24 111⁄2 292 52 24 25
7
2 50 .88 22 ⁄8 22 1 25 .26 .26 111⁄2 292 85 39 20
❑ 1⁄ 8 NPS (6 DN) not available in square socket. Finish or Coating:
❑ All sizes taper tapped — 3⁄ 4“ per foot (62.5mm per meter) on diameter. ❑ Black, dipped in rust resistant;
❑ Galvanized, zinc-plated (inside and out).
PF – 53
Steel Fittings For Plastic Pipe
Insert Coupling Male Adapter

Nominal Overall Nominal
No. of Length No. of Weight/100
Pipe Size Length Weight/100 Pipe Size
Serrations Serrations
NPS DN in mm lbs kg NPS DN in mm lbs kg
1
⁄2 15 33⁄8 86 7 12 5.4 1
⁄2 15 3 76 7 15 6.8
3 3
⁄4 20 3 ⁄8 86 7 18 8.2 3
⁄4 20 1
3 ⁄8 79 7 22 10
1 25 35⁄8 92 7 35 16 1 25 31⁄4 83 7 34 15
11⁄4 32 35⁄8 92 7 45 20 11⁄4 32 31⁄2 89 7 52 24
11⁄2 40 41⁄4 108 7 67 30 1
1 ⁄2 40 4 102 7 69 31
1
2 50 4 ⁄4 108 7 80 36 2 50 4 102 7 94 43
21⁄2 65 7 178 8 220 100 21⁄2 65 53⁄4 146 8 190 86
3 80 7 178 8 325 147 3 80 6 152 8 280 127
4 100 83⁄4 222 8 550 249 4 100 71⁄4 184 8 470 213
Venturi Male Adapter
Well Seal Elbow Length, overall, for each size

Nominal
Nominal Pipe Size Weight/100 6 NPS 8 NPS 10 NPS 12 NPS
Pipe Size
NPS DN lbs kg 150 DN 200 DN 250 DN 300 DN
3
⁄4 20 110 50 NPS DN NPS DN NPS DN NPS DN NPS DN
1 25 170 77 3
⁄4 20 60 1500 80 2000 100 2500 120 3000
11⁄4 32 290 132 1 25 78 1950 104 2600 130 3250 156 3900
11⁄2 40 380 172 1
1 ⁄4 32 102 2550 136 3400 170 4250 204 5100
11⁄2 40 120 3000 160 4000 200 5000 240 6000
2 50 180 4500 240 6000 300 7500 360 9000
Specials — For fittings not shown - Price on Application.
PF – 54
Steel Hose Fittings
for Fast, Economical Hose Connections & Repairs
Combination Nipples Hose Menders
❑ Designed to easily adapt straight-end industrial hose to NPT threaded ❑ Ideal for fast, lasting, on the spot repairs of damaged
fittings on pumps, strainers, valves etc. May also be attached to other hoses or for joining lengths of hose without the bulk
lengths of hose by means of a swivel female coupling. of swivel fittings.
❑ Can be used for most suction and discharge applications where mod- ❑ Can help minimize hose wastage when used to adapt
erated pressures are encountered. Plated nipples are recommended short or odd lengths of hose to meet specific needs.
where corrosion is encountered (i.e. sea water.) ❑ Available in plated or unplated steel
❑ Available in plated or unplated steel ❑ Nominal Pipe Sizes 1⁄ 2 - 6 (15-150 DN)
1
❑ Nominal Pipe Sizes ⁄ 2 - 6 (15-150 DN)
Size Length
No. of Serrations Weight/100
NPS DN in mm lbs kg
1 1
⁄2 15 3 ⁄4 83 7 24 11
3
⁄4 20 39⁄16 90 7 57 26
1 25 311⁄16 94 7 57 26
1 7
1 ⁄4 32 3 ⁄8 98 7 79 36
11⁄2 40 41⁄16 103 7 129 59
2 50 43⁄8 111 7 202 92
❑ Precision engineered and machined to assure accurate sizing and secure

attachment to industrial hose with either bolt clamps or metal brands.
❑ Durable, steel construction will stand up to heavy industrial and mining applications.
PF – 55
Notes
PF – 56
Malleable Iron
Malleable Iron Threaded Pipe With Unions Malleable Iron Threaded Fittings
Pressure - Temperature Ratings Pressure - Temperature Ratings
Pressure Pressure
Temperature
Class 150 Class 250 Class 300 Class 300
Temperature Class
(°F) (°C) psi bar psi bar psi bar Sizes Sizes Sizes
150 1
⁄ 4" - 1" 11⁄ 4" - 2" 21⁄ 2" - 3"
-20° to -28.9° to
300 20.7 500 34.5 600 41.4 (6 - 25 mm) (32 - 51 mm) (64 - 76 mm)
150° 65.6°
200° 93.3 265 18.3 455 31.4 550 37.9 (°F) (°C) psi bar psi bar psi bar psi bar
250° 121.1 225 15.5 405 27.9 505 34.8
-20° to -28.9° to
300° 148.9 185 12.8 360 24.8 460 31.7 300 20.7 2,000 137.9 1,500 103.4 1,000 68.9
150° 65.6°
350° 176.7 150 10.3 315 21.7 415 28.6 200° 93.3 265 18.3 1,785 123.1 1,350 93.1 910 62.7
400° 204.4 110 7.6 270 18.6 370 25.5 250° 121.1 225 15.5 1,575 108.6 1,200 82.7 825 56.9
450° 232.2 75 5.2 225 15.5 325 22.4 300° 148.9 185 12.8 1,360 93.8 1,050 72.4 735 50.7
500° 260.0 – – 180 12.4 280 19.3 350° 176.7 150 10.3 1,150 79.3 900 62.1 650 44.8
550° 287.8 – – 130 9.0 230 15.9 400° 204.4 – – 935 64.5 750 51.7 560 38.6
Note: Unions with Copper or Copper Alloy seats are not intended 450° 232.2 – – 725 50.0 600 41.4 475 32.8
for use where temperature exceeds 450°F – 35.2 31.0 26.5
500° 260.0 – 510 450 385
550° 287.8 – – 300 20.7 300 20.7 300 20.7
Anvil Class 150 (standard Weight) Malleable Iron Fittings conform of Inspected Fire Protection Equipment and Materials” issued by
to ASME B16.3 and Unions conform to ASME B16.39. the Underwriters’ Laboratories, Inc.
Anvil standard weight banded pattern fittings in this catalog, sizes ALL ELBOWS & TEES 3⁄ 8" (10 DN) and LARGER ARE 100% GAS TESTED AT A
1
⁄ 8 NPS to 6 NPS (6 to 150 DN) inclusive, are included in the “List MINIMUM OF 100 PSI. (6.9 bar)
PF – 57
Malleable Iron Class 150
(Standard)
Weight
90° Elbow Size A
black galv.
Figure 1101
NPS DN in mm lbs kg lbs kg
1 11
⁄8 6 ⁄16 17 0.06 0.03 0.07 0.03
1 13
⁄4 8 ⁄16 22 0.11 0.05 0.12 0.05
3 15
⁄8 10 ⁄16 24 0.17 0.08 0.17 0.08
1 1
⁄2 15 1 ⁄8 29 0.26 0.12 0.27 0.12
3
⁄4 20 15⁄16 33 0.38 0.17 0.43 0.20
1
1 25 1 ⁄2 38 0.63 0.29 0.65 0.29
1 3
1 ⁄4 32 1 ⁄4 44 0.96 0.44 0.94 0.43
1 15
1 ⁄2 40 1 ⁄16 49 1.3 0.59 1.3 0.61
1
A
2 50 2 ⁄4 57 2.1 0.9 2.0 0.9
21⁄2 65 211⁄16 68 3.5 1.6 3.6 1.7
1
3 80 3 ⁄16 78 5.2 2.4 5.3 2.4
A 1 7
3 ⁄2 90 3 ⁄16 87 7.1 3.2 7.2 3.3
13
4 100 3 ⁄16 98 8.9 4.1 9.4 4.3
1
5 125 4 ⁄2 114 14 6.3 15 6.6
6 150 51⁄8 130 23 10 24 11
Weight
45° Elbow Size C
black galv.
Figure 1102
1 11
⁄8 6 ⁄16 17 0.06 0.03 0.08 0.04
1 3
⁄4 8 ⁄4 19 0.11 0.05 0.11 0.05
3 13
⁄8 10 ⁄16 22 0.16 0.07 0.18 0.08
1 7
⁄2 15 ⁄8 22 0.21 0.10 0.24 0.11
3
⁄4 20 1 25 0.37 0.17 0.39 0.18
1
1 25 1 ⁄8 29 0.54 0.24 0.57 0.26
1 5
1 ⁄4 32 1 ⁄16 33 0.86 0.39 0.87 0.39
11⁄2 40 17⁄16 37 1.1 0.51 1.2 0.53
11
2 50 1 ⁄16 43 1.7 0.78 1.9 0.84
C
1 15
2 ⁄2 65 1 ⁄16 49 2.8 1.3 2.9 1.3
3
3 80 2 ⁄16 56 4.5 2.0 4.6 2.1
C
5
4 100 2 ⁄8 67 7.2 3.3 7.3 3.3
5 125 31⁄16 78 11 5.2 12 5.3
7
6 150 3 ⁄16 87 17 7.8 18 8.0
ALL ELBOWS & TEES 3⁄ 8" (10 DN) and LARGER ARE 100% GAS TESTED
AT A MINIMUM OF 100 PSI. (6.9 bar)
PF – 58
(Standard)
Weight
45° Street Elbow Size C K
black galv.
Figure 1104
NPS DN in mm in mm lbs kg lbs kg
1 11 7
⁄8 6 ⁄16 17 ⁄8 22 0.06 0.03 0.07 0.03
1 3 15
⁄4 8 ⁄4 19 ⁄16 24 0.10 0.05 0.11 0.05
3 13
⁄8 10 ⁄16 22 1 25 0.14 0.06 0.14 0.06
C
1 7 1
⁄2 15 ⁄8 22 1 ⁄8 29 0.20 0.09 0.21 0.10
3
⁄4 20 1 25 15⁄16 33 0.33 0.15 0.34 0.15
K 1 25 1
1 ⁄8 29 7
1 ⁄16 37 0.52 0.24 0.53 0.24
11⁄4 32 15⁄16 33 111⁄16 43 0.84 0.38 0.87 0.39
1 7 7
1 ⁄2 40 1 ⁄16 37 1 ⁄8 48 1.2 0.55 1.3 0.58
11 1
2 50 1 ⁄16 43 2 ⁄4 57 1.9 0.88 2.0 0.88
Weight
Reducing Elbow Size X Z
black galv.
Figure 1101R
NPS DN NPS DN in mm in mm lbs kg lbs kg
1 1 3 3
⁄4 8 ⁄8 6 ⁄4 19 ⁄4 19 0.10 0.05 0.10 0.05
1 13 7
3
⁄8 6 ⁄16 22 ⁄8 22 0.12 0.05 0.13 0.06
⁄8 10 1 7 15
⁄4 8 ⁄8 22 ⁄16 24 0.14 0.06 0.15 0.07
1
1
⁄4 8 1 25 1 25 0.19 0.09 0.20 0.09
⁄2 15 3
⁄8 10 11⁄16 27 11⁄16 27 0.21 0.10 0.22 0.10
1
⁄4 8 11⁄8 29 11⁄8 29 0.26 0.12 0.28 0.13
3 3
⁄4 20 ⁄8 10 11⁄8 29 11⁄8 29 0.29 0.13 0.30 0.14
1 3 1
⁄2 15 1 ⁄16 30 1 ⁄4 32 0.39 0.18 0.40 0.18
3
⁄8 10 13⁄16 30 11⁄4 32 0.41 0.19 0.42 0.19
1
1 25 ⁄2 15 11⁄4 32 13⁄8 35 0.46 0.21 0.47 0.21
3 3 7
⁄4 20 1 ⁄8 35 1 ⁄16 37 0.55 0.25 0.58 0.26
1 3 9
⁄2 15 1 ⁄8 35 1 ⁄16 40 0.62 0.28 0.64 0.29
11⁄4 32 3
⁄4 20 17⁄16 37 15⁄8 41 0.71 0.32 0.73 0.33
1 25 19⁄16 40 111⁄16 43 0.86 0.39 0.90 0.41
3 1 3
Z ⁄4 20 1 ⁄2 38 1 ⁄4 44 0.83 0.38 0.85 0.39
1 5 13
1 ⁄2 40 1 25 1 ⁄8 41 1 ⁄16 47 1.00 0.45 1.1 0.48
11⁄4 32 113⁄16 47 17⁄8 48 1.2 0.53 1.2 0.54
X
3
⁄4 20 15⁄8 41 2 51 1.3 0.59 1.3 0.60
3
1 25 1 ⁄4 44 2 51 1.4 0.61 1.5 0.66
2 50
11⁄4 32 17⁄8 48 21⁄8 54 1.5 0.69 1.6 0.70
11⁄2 40 2 51 21⁄8 54 1.8 0.79 1.8 0.81
11⁄2 40 23⁄16 56 21⁄2 64 2.3 1.1 2.5 1.2
21⁄2 65 7 5
2 50 2 ⁄16 62 2 ⁄8 67 3.0 1.4 3.0 1.4
2 50 29⁄16 65 215⁄16 75 3.8 1.7 3.9 1.8
3 80
21⁄2 65 213⁄16 73 3 76 4.0 1.8 4.0 1.8
5 5
4 100 3 80 3 ⁄16 84 3 ⁄8 92 7.9 3.6 8.0 3.6
PF – 59
(Standard)
Weight
Straight Tee Size A
black galv.
Figure 1105
1 11
⁄8 6 ⁄16 17 0.09 0.04 0.10 0.05
1 13
⁄4 8 ⁄16 22 0.15 0.07 0.16 0.07
3 15
⁄8 10 ⁄16 24 0.23 0.10 0.24 0.11
1
⁄2 15 11⁄8 29 0.36 0.16 0.37 0.17
3
⁄4 20 15⁄16 33 0.56 0.25 0.58 0.26
1
1 25 1 ⁄2 38 0.90 0.41 0.92 0.42
11⁄4 32 13⁄4 44 1.3 0.59 1.4 0.61
11⁄2 40 115⁄16 49 1.7 0.78 1.8 0.81
2 50 21⁄4 57 2.5 1.1 2.8 1.3
A 1
2 ⁄2 65 2 ⁄1611
68 4.9 2.2 5.0 2.3
A
3 80 31⁄16 78 7.1 3.2 7.3 3.3
31⁄2 90 37⁄16 87 9.0* 4.1 9.4* 4.3
13
A 4 100 3 ⁄16 98 11 5.1 12 5.6
5 125 41⁄2 114 19 8.8 20 8.8
6 150 51⁄8 130 26 12 30 14
*P.O.A.
Weight
90° Street Elbow Size A J
Straight: Figure 1103 black galv.
Reducing: Figure 1103R
1 11
⁄8 6 ⁄16 17 1 25 0.06 0.03 0.06 0.03
1 13
⁄4 8 ⁄16 22 13⁄16 30 0.11 0.05 0.12 0.05
3 15
⁄8 10 ⁄16 24 17⁄16 37 0.17 0.08 0.18 0.08
1 1 5
⁄2 15 1 ⁄8 29 1 ⁄8 41 0.24 0.11 0.26 0.12
3
⁄4 20 15⁄16 33 17⁄8 48 0.41 0.19 0.42 0.19
1 25 11⁄2 38 21⁄8 54 0.62 0.28 0.64 0.29
11⁄4 32 13⁄4 44 27⁄16 62 1.1 0.50 1.1 0.52
A 1 15 11
1 ⁄2 40 1 ⁄16 49 2 ⁄16 68 1.4 0.65 1.6 0.70
2 50 21⁄4 57 31⁄4 83 2.9 1.3 2.7 1.2
21⁄2 65 211⁄16 68 37⁄8 98 4.0 1.8 4.0 1.8
J
1 1
3 80 3 ⁄16 78 4 ⁄2 114 6.1 2.7 6.3 2.8
13 11
4 100 3 ⁄16 98 5 ⁄16 144 9.9 4.5 11 5.0
1
⁄2 x 3⁄8 15 x 10 11⁄16 27 19⁄16 40 0.23 0.10 0.25 0.11
3
⁄4 x 1⁄2 20 x 15 13⁄16 30 13⁄4 44 0.32 0.15 0.36 0.16
3 3 1
1 x ⁄4 25 x 20 1 ⁄8 35 2 ⁄16 52 0.54 0.24 0.56 0.25
1 9 5
1 ⁄4 x 1 32 x 25 1 ⁄16 40 2 ⁄16 59 0.86 0.39 0.89 0.40
11⁄4 x 3⁄4 32 x 20 17⁄16 37 21⁄4 57 0.75* 0.34 0.77* 0.35
11⁄2 x 11⁄4 40 x 32 113⁄16 47 29⁄16 65 1.2 0.54 1.3 0.59
1 5 1
1 ⁄2 x 1 40 x 25 1 ⁄8 41 2 ⁄2 64 1.1* 0.49 1.1* 0.50
First size denotes
female end 2 x 11⁄2 50 x 40 2 51 215⁄16 75 1.9 0.84 1.9 0.85
Note: See page PF-57 for pressure-temperature ratings. ALL ELBOWS & TEES 3⁄ 8" (10 DN) and LARGER ARE 100% GAS TESTED
*P.O.A. AT A MINIMUM OF 100 PSI. (6.9 bar)
PF – 60
(Standard)
Reducing Tee Figure 1105R ALL ELBOWS & TEES 3⁄ 8" and LARGER
ARE 100% GAS TESTED AT A MINIMUM
OF 100 PSI.
Z
Wt.
Size X Y Z
black galv.
NPS DN NPS DN NPS DN in mm in mm in mm lbs kg lbs kg
1 1 1 3 3 3
⁄8 6 ⁄8 6 ⁄4 8 ⁄4 19 ⁄4 19 ⁄4 19 0.12 0.05 0.14 0.06
1 3 3 3
1 1
⁄8 6 ⁄4 19 ⁄4 19 ⁄4 19 0.13 0.06 0.14 0.06
⁄4 8 ⁄4 8 3 15 15 7
⁄8 10 ⁄16 24 ⁄16 24 ⁄8 22 0.19 0.09 0.20 0.09
1 7 13 15
⁄4 8 ⁄8 22 ⁄16 22 ⁄16 24 0.19 0.09 0.20 0.09
1 3 15 15 15
⁄4 8 ⁄8 10 ⁄16 24 ⁄16 24 ⁄16 24 0.21 0.10 0.22 0.10
3 1 1 1
⁄8 10 ⁄2 15 1 ⁄8 29 1 25 1 ⁄8 29 0.29 0.13 0.29 0.13
1 7 7 15
3
⁄4 8 ⁄8 22 ⁄8 22 ⁄16 24 0.21 0.10 0.22 0.10
⁄8 10 1
⁄2 15 11⁄16 27 11⁄16 27 11⁄16 27 0.26 0.12 0.29 0.13
1 1 1 15 1
⁄4 8 ⁄2 15 1 ⁄8 29 ⁄16 24 1 ⁄8 29 0.30 0.14 0.31 0.14
3 3
⁄8 10 ⁄8 10 11⁄16 27 1 25 11⁄16 27 0.28 0.13 0.29 0.13
1
1
⁄4 8 1 25 1 25 1 25 0.27 0.12 0.29 0.13
⁄2 15 3
1
⁄8 10 11⁄16 27 11⁄16 27 11⁄16 27 0.30 0.14 0.32 0.15
⁄2 15 3 1 1 3
⁄4 20 1 ⁄4 32 1 ⁄4 32 1 ⁄16 30 0.43 0.20 0.45 0.20
1 25 13⁄8 35 13⁄8 35 11⁄4 32 0.55 0.25 0.57 0.26
1 3
⁄4 8 ⁄4 20 15⁄16 33 11⁄8 29 15⁄16 33 0.45 0.20 0.46 0.21
3 1 15 1
3
⁄8 10 1 ⁄8 29 ⁄16 24 1 ⁄8 29 0.36 0.16 – –
⁄8 10 3 5 1 5
⁄4 20 1 ⁄16 33 1 ⁄8 29 1 ⁄16 33 0.46 0.21 0.48 0.22
1
1
⁄2 15 13⁄16 30 11⁄8 29 11⁄4 32 0.43 0.20 0.47 0.21
⁄2 15 3
3
⁄4 20 15⁄16 33 11⁄4 32 15⁄16 33 0.51 0.23 0.51 0.23
⁄4 20 1 1 1 1
⁄4 8 1 ⁄16 27 1 ⁄16 27 1 ⁄8 29 0.38 0.17 0.40 0.18
3 1 1 1
⁄8 10 1 ⁄8 29 1 ⁄8 29 1 ⁄8 29 0.42 0.19 0.46 0.21
3 1
⁄4 20 ⁄2 15 13⁄16 22 13⁄16 30 11⁄4 32 0.46 0.21 0.49 0.22
1 25 17⁄16 37 17⁄16 37 13⁄8 35 0.62 0.28 0.66 0.30
1 5 5 7
1 ⁄4 32 1 ⁄8 41 1 ⁄8 41 1 ⁄16 37 0.90 0.41 0.93 0.42
1
⁄4 8 1 25 11⁄2 38 15⁄16 33 11⁄2 38 0.69 0.31 0.71 0.32
1
⁄2 15 11⁄4 32 11⁄8 29 13⁄8 35 0.55 0.25 0.55 0.25
1 3
⁄2 15 ⁄4 20 13⁄8 35 11⁄4 32 17⁄16 37 0.56 0.25 0.62 0.28
1 3 1
1 25 1 ⁄2 38 1 ⁄8 35 1 ⁄2 38 0.76 0.34 0.73 0.33
1
⁄2 15 11⁄4 32 13⁄16 30 13⁄8 35 0.59 0.27 0.62 0.28
3 3
⁄4 20 ⁄4 20 13⁄8 35 15⁄16 33 17⁄16 37 0.73 0.33 0.75 0.34
1 7 1
1 25 1 ⁄2 38 1 ⁄16 37 1 ⁄2 38 0.78 0.35 0.81 0.37
1 25 1 1 1 1
⁄4 8 1 ⁄8 29 1 ⁄8 29 1 ⁄4 44 0.55 0.25 0.55 0.25
3
⁄8 10 13⁄16 30 13⁄16 30 11⁄4 32 0.60 0.27 0.63 0.29
1
⁄2 15 11⁄4 32 11⁄4 32 13⁄8 35 0.70 0.32 0.74 0.34
3 3 3 7
1 25 ⁄4 20 1 ⁄8 35 1 ⁄8 35 1 ⁄16 37 0.82 0.37 0.84 0.38
1 11 11 9
1 ⁄4 32 1 ⁄16 43 1 ⁄16 43 1 ⁄16 40 0.92 0.42 0.97 0.44
11⁄2 40 113⁄16 47 113⁄16 46 15⁄8 41 1.2 0.54 1.2 0.56
2 50 2 51 2 51 13⁄4 44 1.6 0.74 1.6 0.74
Note: See page PF-57 for pressure-temperature ratings.
PF – 61
(Standard)
Wt.
Size X Y Z
black galv.
9 3 11
1
⁄2 15 1 25 1 ⁄16 40 1 ⁄8 35 1 ⁄16 43 0.87 0.39 0.94 0.43
11⁄4 32 13⁄4 44 19⁄16 40 13⁄4 44 1.0 0.47 1.1 0.49
3 7 5 5
⁄4 20 1 ⁄16 37 1 ⁄16 33 1 ⁄8 41 0.86 0.39 0.86 0.39
3
⁄4 20 1 25 19⁄16 40 17⁄16 37 111⁄16 43 0.96 0.44 0.88 0.40
11⁄4 32 13⁄4 44 15⁄8 41 13⁄4 44 1.1 0.49 1.1 0.50
1
⁄2 15 13⁄8 35 11⁄4 32 19⁄16 40 0.76 0.34 0.79 0.36
3
⁄4 20 17⁄16 37 13⁄8 35 15⁄8 41 0.87 0.39 0.92 0.42
1
1 25 9 1
1 ⁄4 32 1 25 1 ⁄16 40 1 ⁄2 38 111⁄16 43 1.1 0.50 1.1 0.51
11⁄4 32 13⁄4 44 111⁄16 43 13⁄4 44 1.1 0.51 1.2 0.54
3 1 1 7
⁄8 10 1 ⁄4 32 1 ⁄4 32 1 ⁄16 37 0.86 0.39 0.89 0.40
1
⁄2 15 13⁄8 35 13⁄8 35 19⁄16 40 0.98 0.44 0.98 0.44
3 7 7
⁄4 20 1 ⁄16 37 1 ⁄16 37 15⁄8 41 1.1 0.48 1.1 0.50
11⁄4 32
1 25 19⁄16 40 19⁄16 40 111⁄16 43 1.2 0.54 1.2 0.55
1 7 7 13
1 ⁄2 40 1 ⁄8 48 1 ⁄8 48 1 ⁄16 47 1.5 0.66 1.4 0.64
1 1 7
2 50 2 ⁄8 54 2 ⁄8 54 1 ⁄8 48 1.7 0.77 1.8 0.83
1
⁄2 15 11⁄2 40 115⁄16 49 111⁄16 43 115⁄16 49 1.4 0.61 1.4 0.64
3
11⁄2 40 115⁄16 49 13⁄4 44 115⁄16 49 1.4 0.64 1.6 0.71
⁄4 20 3 1 5 3
⁄4 20 1 ⁄2 38 1 ⁄16 33 1 ⁄4 44 1.00 0.45 1.0 0.47
11⁄2 40 115⁄16 49 113⁄16 47 115⁄16 49 1.5 0.68 1.5 0.70
1 25 11⁄4 32 113⁄16 47 111⁄16 43 17⁄8 48 1.3 0.59 1.4 0.65
1 25 15⁄8 41 11⁄2 38 113⁄16 47 1.1 0.52 1.2 0.54
1 7 3 11
⁄2 15 1 ⁄16 37 1 ⁄8 35 1 ⁄16 43 1.0 0.47 1.1 0.50
3
⁄4 20 11⁄2 38 17⁄16 37 13⁄4 44 1.1 0.49 1.1 0.50
11⁄2 40
11⁄4 32 1 25 15⁄8 41 19⁄16 40 113⁄16 47 1.3 0.57 1.3 0.58
1 13 3 7
1 ⁄4 32 1 ⁄16 47 1 ⁄4 44 1 ⁄8 48 1.5 0.69 1.4 0.64
1 15 7 15
1 ⁄2 40 1 ⁄16 49 1 ⁄8 48 1 ⁄16 49 1.5 0.68 1.6 0.70
1
⁄2 15 17⁄16 37 17⁄16 37 111⁄16 43 1.2 0.54 1.3 0.57
3
⁄4 20 11⁄2 38 11⁄2 38 13⁄4 44 1.3 0.59 1.4 0.64
1 5 5 13
1 ⁄2 40 1 25 1 ⁄8 41 1 ⁄8 41 1 ⁄16 47 1.4 0.65 1.5 0.68
1 13 13 7
1 ⁄4 32 1 ⁄16 47 1 ⁄16 47 1 ⁄8 48 1.5 0.66 1.5 0.67
2 50 23⁄16 56 23⁄16 56 2 51 1.9 0.84 2.0 0.9
1
⁄2 15 2 50 21⁄4 57 17⁄8 48 21⁄4 57 2.1 1.0 2.3 1.0
3 1 15 1
⁄4 20 2 50 2 ⁄4 57 1 ⁄16 49 2 ⁄4 57 2.0 0.91 2.0 0.89
1 25 2 50 21⁄4 57 2 51 21⁄4 57 2.1 1.0 2.3 1.0
11⁄4 32 17⁄8 48 13⁄4 44 21⁄8 54 1.7 0.78 1.8 0.81
11⁄4 32 11⁄2 40 2 51 17⁄8 48 23⁄16 56 1.9 0.84 2.0 0.91
1 1 1
2 50 2 ⁄4 57 2 ⁄8 54 2 ⁄4 57 2.2 1.0 2.3 1.0
1 25 13⁄4 44 15⁄8 41 2 51 1.6 0.72 1.6 0.73
11⁄4 32 17⁄8 48 113⁄16 47 21⁄8 54 1.8 0.80 1.8 0.83
2 50 11⁄2 40 1 15 3
1 ⁄2 40 2 51 1 ⁄16 49 2 ⁄16 56 2.0 0.88 2.0 0.88
1 3 1
2 50 2 ⁄4 57 2 ⁄16 56 2 ⁄4 57 2.2 1.0 2.4 1.1
1
⁄2 15 11⁄2 38 11⁄2 38 17⁄8 48 1.6 0.75 1.7 0.77
3
⁄4 20 15⁄8 41 15⁄8 41 2 51 1.9 0.85 1.9 0.86
3 3
1 25 1 ⁄4 44 1 ⁄4 44 2 51 1.8 0.81 2.0 0.91
2 50 1 7 7 1
1 ⁄4 32 1 ⁄8 48 1 ⁄8 48 2 ⁄8 54 2.4 1.1 2.5 1.2
11⁄2 40 2 51 2 51 23⁄16 56 2.5 1.2 2.6 1.2
21⁄2 65 25⁄8 67 25⁄8 67 23⁄8 60 3.5 1.6 3.6 1.6
Note: See page PF-57 for pressure-temperature ratings. ALL ELBOWS & TEES 3⁄ 8" (10 DN) and LARGER ARE 100% GAS TESTED AT A MINIMUM OF 100 PSI. (6.9 bar)
PF – 62
(Standard)
Wt.
Size X Y Z
black galv.
2 50 23⁄8 60 23⁄16 56 25⁄8 67 3.4 1.6 3.5 1.6
11⁄2 40 1 11 1 11
2 ⁄2 65 2 ⁄16 68 2 ⁄2 64 2 ⁄16 68 3.8 1.7 3.8 1.7
3 1 5
2 50 2 ⁄8 60 2 ⁄4 57 2 ⁄8 67 3.3 1.5 3.3 1.5
2 50
21⁄2 65 211⁄16 68 25⁄8 67 211⁄16 68 3.6 1.7 4.1 1.9
3
⁄4 20 13⁄4 44 13⁄4 44 25⁄16 59 2.8 1.3 2.8 1.3
21⁄2 65 7 7 3
1 25 1 ⁄8 48 1 ⁄8 48 2 ⁄8 60 2.9 1.3 3.0 1.4
11⁄4 32 21⁄16 52 21⁄16 52 27⁄16 62 3.3 1.5 3.5 1.6
21⁄2 65
11⁄2 40 23⁄16 56 23⁄16 56 21⁄2 64 3.5 1.6 3.6 1.6
2 50 23⁄8 60 23⁄8 60 25⁄8 67 3.6 1.7 3.8 1.7
13
3 80 3 76 3 76 2 ⁄16 73 5.8 2.6 6.0 2.7
2 50 21⁄2 64 21⁄4 57 27⁄8 73 4.1 1.9 4.3 2.0
2 50
3 80 31⁄8 79 27⁄8 73 31⁄8 79 6.1 2.8 6.5 3.0
1 3 7
2 50 2 ⁄2 64 2 ⁄8 60 2 ⁄8 73 4.8 2.2 4.8 2.2
21⁄2 65 1 13 11
2 ⁄2 65 2 ⁄16 73 2 ⁄16 68 3 76 5.8 2.6 5.9 2.7
3
⁄4 20 17⁄8 48 17⁄8 48 25⁄8 67 4.0 1.8 4.2 1.9
3 80
1 25 2 51 2 51 25⁄8 67 4.2 1.9 4.4 2.0
1 3 3 3
1 ⁄4 32 2 ⁄16 56 2 ⁄16 56 2 ⁄4 70 4.7 2.1 4.7 2.1
3 80 1 5 5 13
1 ⁄2 40 2 ⁄16 59 2 ⁄16 59 2 ⁄16 73 5.1 2.3 5.3 2.4
2 50 21⁄2 64 21⁄2 64 27⁄8 73 5.8 2.6 5.8 2.6
21⁄2 65 213⁄16 73 213⁄16 73 3 76 6.1 2.8 6.2 2.8
13 5 13
3 80 4 100 3 ⁄16 98 3 ⁄8 92 3 ⁄16 98 12 5.4 11 5.0
2 50 23⁄4 70 23⁄4 70 37⁄16 87 8.4 3.8 8.8 4.0
4 100
4 100 21⁄2 65 31⁄16 78 31⁄16 78 31⁄2 89 9.8 4.4 9.3 4.2
3 80 35⁄16 84 35⁄16 84 35⁄8 92 11 5.0 11 5.1

PF – 63
(Standard)
Weight
Street or Service Tee Size A J
Straight: Figure 1106 black galv.
Reducing: Figure 1106R
1
Fe
⁄4 8 13⁄16 30 13⁄16 30 0.15 0.07 0.16 0.07
3
⁄8 10 15⁄16 33 17⁄16 37 0.24 0.11 0.26 0.12
1
⁄2 15 11⁄8 29 15⁄8 41 0.34 0.15 0.34 0.15
3
⁄4 20 15⁄16 33 17⁄8 48 0.54 0.24 0.63 0.29
1 25 11⁄2 38 21⁄8 54 0.96 0.44 0.99 0.45
11⁄4 32 13⁄4 44 27⁄16 62 1.4 0.63 1.5 0.68
11⁄2 40 115⁄16 49 211⁄16 68 1.9 0.88 2.0 0.91
2 50 21⁄4 57 31⁄4 83 3.2 1.4 3.2 1.5
A
Size Run Outlet Weight
A female run x
male run x outlet A J A black
NPS DN in mm in mm in mm lbs kg
J
11⁄4 x 1 x 11⁄4 32 x 25 x 32 13⁄4 44 25⁄16 59 13⁄4 44 1.3 0.60
Weight ALL ELBOWS & TEES 3⁄ 8"

45° Y-branch Size T U V
or Lateral black galv. (10 DN) and LARGER ARE
100% GAS TESTED
Figure 1108
NPS DN in mm in mm in mm lbs kg lbs kg AT A MINIMUM OF 100
PSI. (6.9 bar)
3 1
⁄8 10 ⁄2 13 17⁄16 37 115⁄16 49 0.27 0.12 0.29 0.13
1 5
⁄2 15 ⁄8 16 111⁄16 43 25⁄16 59 0.37 0.17 0.39 0.18
3 3
⁄4 20 ⁄4 19 21⁄16 52 213⁄16 73 0.62 0.28 0.65 0.29
7
1 25 ⁄8 22 27⁄16 62 35⁄16 84 0.86 0.39 0.93 0.42
11⁄4 32 1 25 215⁄16 75 315⁄16 100 1.6 0.74 1.6 0.73
11⁄2 40 11⁄8 29 31⁄4 83 43⁄8 111 2.0 0.91 2.1 0.9
2 50 11⁄4 32 315⁄16 100 53⁄16 132 3.0 1.4 3.3 1.5

U
V
21⁄2 65 11⁄2 38 43⁄4 121 61⁄4 159 5.9 2.7 6.1 2.7
U T Note: See page PF-57
3 80 111⁄16 43 59⁄16 141 71⁄4 184 9.3 4.2 9.4 4.3 for pressure temperature
ratings.
4 100 2 51 7 178 9 229 16 7.1 16 7.2
Dia. of Diameter Weight

Floor Flange Size Dia. of Holes
Flange of Bolt Circle No. of black galv.
Figure 1190 Holes
NPS DN in mm in mm in mm lbs kg lbs kg
⁄4 ◊
1
8◊ 3
2 ⁄16 56 1 ⁄87
48 4 1
⁄4 6 0.27 0.12 0.43 0.20
3
⁄8 ◊ 10 ◊ 3 76 2 51 4 1
⁄4 6 0.33 0.15 0.48 0.22
1
⁄2 15 31⁄2 89 21⁄2 64 4 1
⁄4 6 0.56 0.25 0.60 0.27
3
⁄4 20 31⁄2 89 21⁄2 64 4 1
⁄4 6 0.60 0.27 0.58 0.26
1
1 25 4 102 3 76 4 ⁄4 6 0.85 0.39 0.88 0.40
1 1
1 ⁄4 32 4 102 3 76 4 ⁄4 6 0.90 0.41 0.90 0.41
11⁄2 40 41⁄2 114 31⁄2 89 4 5
⁄16 8 1.2 0.54 1.3 0.57
2 50 51⁄2 140 41⁄4 108 4 5
⁄16 8 2.0 0.9 2.0 0.9
◊ Cast Iron
PF – 64
(Standard)
Weight
Cross Size A
black galv.
Fig: 1107
1 11
⁄8 6 ⁄16 17 0.12 0.05 0.13 0.06
1 13
⁄4 8 ⁄16 22 0.18 0.08 0.19 0.09
3 15
⁄8 10 ⁄16 24 0.27 0.12 0.27 0.12
1 1
⁄2 15 1 ⁄8 29 0.41 0.19 0.43 0.20
3
⁄4 20 15⁄16 33 0.69 0.31 0.68 0.31
1
1 25 1 ⁄2 38 1.1 0.51 1.1 0.52
1 3
1 ⁄4 32 1 ⁄4 44 1.4 0.65 1.6 0.71
A A
1 15
1 ⁄2 40 1 ⁄16 49 2.0 0.90 2.0 0.9
A 2 50 1
2 ⁄4 57 3.3 1.5 3.3 1.5
21⁄2 65 211⁄16 68 5.9 2.7 5.8 2.6
A
1
3 80 3 ⁄16 78 7.9 3.6 8.1 3.7
13
4 100 3 ⁄16 98 14 6.1 14 6.3
Coupling Weight
Size W
Right Hand black galv.
Figure 1121 NPS DN in mm lbs kg lbs kg
1 15
⁄8 6 ⁄16 24 0.06 0.03 0.06 0.03
1
⁄4 8 11⁄16 27 0.09 0.04 0.09 0.04
3
⁄8 10 13⁄16 30 0.13 0.06 0.13 0.06
1
⁄2 15 15⁄16 33 0.20 0.09 0.21 0.10
3
⁄4 20 11⁄2 38 0.29 0.13 0.31 0.14
1 25 111⁄16 43 0.48 0.22 0.49 0.22
11⁄4 32 115⁄16 49 0.74 0.34 0.76 0.34
1 1
1 ⁄2 40 2 ⁄8 54 1.00 0.45 1.00 0.45
1
2 50 2 ⁄2 64 1.5 0.66 1.6 0.70
W 1 7
2 ⁄2 65 2 ⁄8 73 2.4 1.1 2.5 1.1
3 80 33⁄16 81 3.3 1.5 3.4 1.5
4 100 311⁄16 94 5.7 2.6 5.7 2.6
Minimum Dimensions Weight

Hex Locknut Size
A B C D black galv.
Figure 1134
1
• ⁄8 •6 .690 18 .500 13 .190 5 .040 1 0.04 0.02 0.04 0.02
A(min.) Across
Flats Six Sides
1
• ⁄4 •8 .840 21 .660 17 .250 6 .060 2 0.02 0.01 0.03 0.01
X X
3
⁄8 10 1.000 25 .770 20 .280 7 .060 2 0.04 0.02 0.04 0.02
D (min) 1
⁄2 15 1.180 30 .970 25 .310 8 .060 2 0.06 0.03 0.06 0.03
B dia. (min) C (min)
3
⁄4 20 1.430 36 1.230 31 .340 9 .060 2 0.12 0.05 0.13 0.06
1 25 1.750 44 1.500 38 .380 10 .060 2 0.14 0.06 0.16 0.07
NPSL Thread
For nominal sizes larger than 2" 1
1 ⁄4 32 2.100 53 1.860 47 .420 11 .060 2 0.21 0.10 0.19 0.09
(50 DN) see cast iron standard. 1
1 ⁄2 40 2.350 60 2.120 54 .470 12 .060 2 0.24 0.11 0.25 0.11
2 50 2.880 73 2.630 67 .530 13 .090 2 0.40 0.18 0.47 0.21
• 1⁄ 8 & 1⁄ 4 NPS (6 & 8 DN) are Made in Steel
Note: See page PF-57 for pressure temperature ratings.
PF – 65
(Standard)
Weight Return Bends Open Pattern, R.H. Fig: 1119

Reducer Size M
black galv.
Figure 1125
NPS DN NPS DN in mm lbs kg lbs kg
1 1
⁄4 8 ⁄8 6 1 25 0.07 0.03 0.08 0.04
1
3
⁄8 6 0.11 0.05 0.13 0.06
⁄8 10 1
11⁄8 29
⁄4 8 0.11 0.05 0.12 0.05
1
⁄8 6 0.14 0.06 0.15 0.07
1 1 1 Center to Weight
⁄2 15 ⁄4 8 1 ⁄4 32 0.15 0.07 0.16 0.07 Size
3
Center black galv.
⁄8 10 0.16 0.07 0.18 0.08
1
⁄8 6 0.24 0.11 0.25 0.11 NPS DN in mm lbs kg lbs kg
1
3
⁄4 8 0.22 0.10 0.23 0.10 1
⁄2 15 1
1 ⁄2 38 0.36* 0.16 – –
⁄4 20 3
17⁄16 37
⁄8 10 0.25 0.11 0.26 0.12 3
⁄4 20 2 51 0.64* 0.29 – –
1
⁄2 15 0.26 0.12 0.28 0.13 1 25 1
2 ⁄2 64 1.1 0.50 1.1 0.52
1
⁄4 8 0.35 0.16 0.37 0.17 11⁄4 32 3 76 1.8* 0.80 – –
3
⁄8 10 11
0.35 0.16 0.38 0.17 11⁄2 40 31⁄2 89 2.5* 1.2 – –
1 25 1
1 ⁄16 43
⁄2 15 0.39 0.18 0.41 0.19 2 50 4 102 4.0 1.8 4.3 1.9
3
⁄4 20 0.42 0.19 0.44 0.20 *POA
1
⁄2 15 0.60 0.27 0.63 0.29
11⁄4 32 3
⁄4 20 21⁄16 52 0.64 0.29 0.65 0.29
1 25 0.68 0.31 0.70 0.32
1
⁄2 15 0.77 0.35 0.80 0.36
3
⁄4 20 0.88 0.40 0.90 0.41 Cap Figure 1124
11⁄2 40 25⁄16 59
1 25 0.90 0.41 0.91 0.41
11⁄4 32 0.90 0.41 0.93 0.42
1
⁄2 15 1.1 0.52 1.2 0.54
3
⁄4 20 1.3 0.61 1.3 0.61
2 50 1 25 213⁄16 73 1.4 0.64 1.4 0.64
11⁄4 32 1.5 0.69 1.5 0.69
M 11⁄2 40 1.6 0.70 1.6 0.71 Weight
Size
1 25 2.1 1.0 2.2 1.0 black galv.
11⁄4 32 2.1 0.9 2.1 1.0
21⁄2 65 31⁄4 83 NPS DN lbs kg lbs kg
11⁄2 40 2.1 0.9 2.1 1.0
1
• ⁄8 •6 0.03 0.01 0.04 0.02
2 50 2.5 1.1 2.6 1.2
1 25 3.2 1.4 3.2 1.5 •1⁄4 •8 0.06 0.03 0.06 0.03
1 ⁄41
32 3.2 1.5 3.0 1.4 •3⁄8 •10 0.09 0.04 0.10 0.05
1
3 80 11⁄2 40 311⁄16 94 3.3 1.5 3.5 1.6 ⁄2 15 0.12 0.05 0.12 0.05
3
2 50 3.2 1.5 3.4 1.5 ⁄4 20 0.22 0.10 0.20 0.09
2 ⁄21
65 3.3 1.5 3.4 1.5 1 25 0.38 0.17 0.38 0.17
2 50 4.3 2.0 4.4 2.0 11⁄4 32 0.58 0.26 0.61 0.28
1
1
3 ⁄2 90 2 ⁄21
65 4 102 4.7* 2.1 4.8* 2.2 1 ⁄2 40 0.73 0.33 0.75 0.34
3 80 5.0 2.3 5.2 2.3 2 50 1.1 0.51 1.2 0.54
11⁄2 40 4.9 2.2 5.0 2.3 21⁄2 65 1.8 0.79 1.8 0.82
2 50 5.1 2.3 5.0 2.3 3 80 2.6 1.2 2.8 1.2
4 100 2 ⁄21
65 3
4 ⁄8 111 5.9 2.7 6.0 2.7 31⁄2 90 3.2 1.4 3.2 1.5
3 80 6.5 3.0 6.6 3.0 4 100 4.5 2.1 4.6 2.1
31⁄2 90 6.3 2.9 6.5 2.9 5 125 6.4 2.9 6.9 3.1
6 150 10.0 4.5 10.0 4.5
5 125 4 100 49⁄16 116 9.6 4.3 9.2 4.2
• 1⁄ 8, 1⁄ 4 & 3⁄ 8 (6, 8 & 10 DN) are Made in Steel
6 150 4 100 413⁄16 124 10 4.7 11 4.9
*POA
PF – 66
Malleable Iron Plain Fittings
NOTE: Not to be used for pressure service
Weight
Waste Nut Size
black galv.
Figure 1133
NPS DN lbs kg lbs kg
1
⁄2 15 0.12* 0.05 0.12* 0.05
3
⁄4 20 0.15* 0.07 0.15* 0.07
*POA
Weight
Extension Piece Size A
black galv.
Figure 1137
3
⁄8 10 15⁄16 33 0.10* 0.05 0.10* 0.05
1
⁄2 15 15⁄8 41 0.14 0.06 0.16 0.07
3
⁄4 20 115⁄16 49 0.26 0.12 0.26 0.12
A 1 25 21⁄16 52 0.42 0.19 0.41 0.19
*POA
PF – 67
Malleable Iron Fittings Class 300 (XS/XH)
Anvil Class 300 XS/XH fittings conform to American National Stan- Anvil extra heavy banded pattern fittings in this catalog, sizes
dard ASME B16.3 and are in compliance with the requirements of 1
⁄ 4 to 4 NPS (8 to 100 DN), are included in the “List of Inspected
the AAR (1994 AAR Manual of Standards and Practices) Fire Protection Equipment and Materials” issued by
Underwriters’ Laboratories.
Weight
90° Elbow Straight Size A
black galv.
Figure 1161
1 15
⁄4 8 ⁄16 24 0.20 0.09 0.20 0.09
3
⁄8 10 11⁄16 27 0.29 0.13 0.32 0.15
1 1
⁄2 15 1 ⁄4 32 0.47 0.21 0.48 0.22
3
⁄4 20 17⁄16 37 0.66 0.30 0.68 0.31
5
1 25 1 ⁄8 41 1.2 0.53 1.2 0.54
1 15
1 ⁄4 32 1 ⁄16 49 1.9 0.85 1.9 0.88
A 1 1
1 ⁄2 40 2 ⁄8 54 2.5 1.1 2.6 1.2
1
2 50 2 ⁄2 64 4.2 1.9 4.3 1.9
A 21⁄2 65 215⁄16 75 5.3 2.4 5.9 2.7
3
3 80 3 ⁄8 86 9.7 4.4 9.8* 4.4*
1
4 100 4 ⁄2 114 16 7.3 16 7.4
*POA
Weight
90° Reducing Elbow Size A B
black galv.
Figure 1161R
3 1
⁄8 x ⁄4 10 x 8 1 25 1 25 0.26* 0.12* – –
1
⁄2 x 3⁄8 15 x 10 13⁄16 30 13⁄16 30 0.41* 0.19* – –
3
⁄4 x 1⁄2 20 x 15 15⁄16 33 13⁄8 35 0.62* 0.28* 0.67* 0.30*
1 x 1⁄2 25 x 15 17⁄16 37 11⁄2 38 0.87* 0.39 0.89 0.40
B
3 1
1 x ⁄4 25 x 20 1 ⁄2 38 19⁄16 40 1.00 0.45 – –
11⁄4 x 3⁄4 32 x 20 15⁄8 41 13⁄4 44 1.4 0.64 – –
11⁄4 x 1 32 x 25 13⁄4 44 113⁄16 47 1.6* 0.73* – –
A
1 13
1 ⁄2 x 1 40 x 25 1 25 1 ⁄16 47 2.0 0.91 – –
11⁄2 x 11⁄4 40 x 32 2 51 21⁄16 52 2.1 1.0 – –
2 x 11⁄4 50 x 32 21⁄8 54 25⁄16 59 3.1 1.4 – –
1 1 3
2 x 1 ⁄2 50 x 40 2 ⁄4 57 2 ⁄8 60 3.3 1.5 3.3 1.5
*POA
Weight
45° Street Elbow Size C K
black
Figure 1160
1 3
⁄2 15 1 25 1 ⁄8 35 0.36 0.16
3
⁄4 20 11⁄8 29 19⁄16 40 0.54 0.24
K
5 13
1 25 1 ⁄16 33 1 ⁄16 47 0.85 0.39
1 1 1
1 ⁄4 32 1 ⁄2 38 2 ⁄8 54 1.5 0.69
C 1 ⁄21
40 11
1 ⁄16 43 5
2 ⁄16 59 2.1 0.9
11
2 50 2 51 2 ⁄16 68 3.3 1.5

ALL ELBOWS & TEES 3⁄ 8" (10 DN) and LARGER ARE 100% GAS TESTED AT A MINIMUM OF 100 PSI. (6.9 bar)
PF – 68
Malleable Iron Fittings Class 300 (XS/XH)
Weight
90° Street Elbow Size A J
black galv.
Figure 1170
1 15
⁄4 8 ⁄16 24 17⁄16 37 0.17 0.08 0.18 0.08
3 1 5
⁄8 10 1 ⁄16 27 1 ⁄8 41 0.26 0.12 0.27 0.12
1
⁄2 15 11⁄4 32 2 51 0.40 0.18 0.42 0.19
3 7 3
⁄4 20 1 ⁄16 37 2 ⁄16 56 0.68 0.31 0.71 0.32
1 25 15⁄8 41 29⁄16 65 1.1 0.48 1.1 0.50

A
1 15 7
1 ⁄4 32 1 ⁄16 49 2 ⁄8 73 1.6 0.73 1.6 0.73
J 11⁄2 40 21⁄8 54 31⁄8 79 2.2 1.0 2.3 1.0

1 11
2 50 2 ⁄2 64 3 ⁄16 94 3.6 1.6 3.8 1.7
3 80 33⁄8 86 51⁄8 130 9.6* 4.3* 9.9* 4.5*
*POA
Weight
45° Elbow Size C
black galv.
Figure 1162
1 13
⁄4 8 ⁄16 22 0.19 0.09 0.20 0.09
3 7
⁄8 10 ⁄8 22 0.28 0.13 0.29 0.13
1
⁄2 15 1 25 0.43 0.20 0.44 0.20
3 1
⁄4 20 1 ⁄8 29 0.66 0.30 0.68 0.31
5
1 25 1 ⁄16 33 1.00 0.45 1.0 0.46
1 1
1 ⁄4 32 1 ⁄2 38 1.7 0.76 1.7 0.77
C
1 11
1 ⁄2 40 1 ⁄16 43 2.1 1.0 2.3 1.0
2 50 2 51 3.4 1.5 3.5 1.6
1 1
2 ⁄2 65 2 ⁄4 57 5.5 2.5 5.6 2.5
C
1
3 80 2 ⁄2 64 8.1 3.7 8.5 3.9
13
4 100 2 ⁄16 73 13 6.1 14 6.3
*POA
Center to End Weight

Cross Size
A black galv.
Figure 1165
1 15
⁄4 8 ⁄16 24 0.35* 0.16* 0.36* 0.16*
3
⁄8 10 11⁄16 27 0.46* 0.21* – –
3
⁄4 20 17⁄16 37 1.3 0.57 1.3 0.60
1 25 15⁄8 41 1.9 0.86 – –

A A
11⁄4 32 115⁄16 49 3.2* 1.5* 3.3* 1.5*
A
11⁄2 40 21⁄8 54 4.2* 1.9* 4.3* 2.0*
A
2 50 21⁄2 64 6.4* 2.9* 6.6* 3.0*
*POA
Note: See page PF-57 for pressure-temperature ratings. ALL ELBOWS & TEES 3⁄ 8" (10 DN) and LARGER ARE 100% GAS TESTED AT A MINIMUM OF 100 PSI. (6.9 bar)
PF – 69
Malleable Iron Fittings – Class 300
Center to End Weight (lbs)

Reducing Tee Size
A B C black galv.
Figure 1164R
3 3 1
⁄8 10 ⁄8 10 ⁄4 8 1 25 1 25 1 25 0.37 0.17 — —
1
⁄4 8 11⁄16 27 11⁄16 27 11⁄8 29 0.48* 0.22* 0.52 0.24
1 1 3
⁄2 15 ⁄2 15 ⁄8 10 13⁄16 30 13⁄16 30 13⁄16 30 0.61* 0.28* — —
3
⁄4 20 13⁄8 35 13⁄8 35 15⁄16 33 0.80 0.36 — —
3
1 ⁄4 20 17⁄16 37 13⁄8 35 17⁄16 37 0.93 0.42 — —
⁄2 15 1
⁄2 15 15⁄16 33 11⁄4 32 13⁄8 35 0.78 0.35 — —
3 1
⁄4 20 ⁄4 8 13⁄16 30 13⁄16 30 11⁄4 32 0.76* 0.34* 0.80 0.36
3 3
⁄4 20 ⁄8 10 11⁄4 32 11⁄4 32 15⁄16 33 0.80 0.36 — —
1
⁄2 15 15⁄16 33 15⁄16 33 13⁄8 35 0.90 0.41 0.88 0.40
1
⁄2 15 1 25 15⁄8 41 11⁄2 38 15⁄8 41 1.4 0.62 — —
3
3 ⁄4 20 11⁄2 38 17⁄16 37 19⁄16 40 1.3* 0.58* — —
⁄4 20
1 25 15⁄8 41 19⁄16 40 15⁄8 41 1.4 0.63 — —
1 25 1
⁄4 8 11⁄4 32 11⁄4 32 13⁄8 35 1.1 0.49 — —
1
1 25 ⁄2 15 17⁄16 37 17⁄16 37 11⁄2 38 1.3 0.57 1.3 0.59
3
⁄4 20 11⁄2 38 11⁄2 38 19⁄16 40 1.3 0.60 1.4 0.65
1 25 1 25 13⁄4 44 15⁄8 41 113⁄16 47 1.9 0.87 — —
1
⁄2 15 11⁄2 38 11⁄2 38 111⁄16 43 1.7 0.77 1.9 0.85
A B 11⁄4 32
11⁄4 32 3
⁄4 20 15⁄8 41 15⁄8 41 13⁄4 44 1.9 0.86 2.0 0.90
1 25 13⁄4 44 13⁄4 44 113⁄16 47 2.1 1.0 2.1 1.0
1
⁄2 15 15⁄8 41 15⁄8 41 113⁄16 47 2.3 1.0 2.3 1.1
3
C ⁄4 20 111⁄16 43 111⁄16 43 17⁄8 48 2.5 1.1 2.5 1.1
11⁄2 40 11⁄2 40
1 25 113⁄16 47 113⁄16 47 2 51 2.6 1.2 2.7 1.2
11⁄4 32 2 51 2 51 21⁄16 52 3.0* 1.4* 3.1* 1.4*
11⁄2 40 2 50 21⁄2 64 23⁄8 60 21⁄2 64 4.5 2.0 – –
1
⁄2 15 13⁄4 44 13⁄4 44 21⁄16 52 3.4 1.5 3.5 1.6
3
⁄4 20 113⁄16 47 113⁄16 47 21⁄8 54 3.6 1.6 3.6 1.6
2 50
2 50 1 25 2 51 2 51 21⁄4 57 4.0 1.8 4.0 1.8
11⁄4 32 21⁄8 54 21⁄8 54 25⁄16 59 4.2 1.9 4.4 2.0
11⁄2 40 21⁄4 57 21⁄4 57 23⁄8 60 4.6 2.1 4.7 2.1
11⁄2 40 27⁄16 62 27⁄16 62 25⁄8 67 6.3* 2.9* 6.6* 3.0*
21⁄2 65 21⁄2 65
2 50 211⁄16 68 211⁄16 68 23⁄4 70 7.6* 3.4* 7.5* 3.4*
3 80 3 80 2 2 213⁄16 73 213⁄16 73 31⁄8 79 9.6 4.4 10 4.6
*POA
Center Weight
Straight Tee Size to End
A black galv.
Figure 1164
1 5
⁄4 8 1 ⁄16 33 0.27 0.12 0.30 0.14
3 1
⁄8 10 1 ⁄16 27 0.42 0.19 0.43 0.20
1 1
⁄2 15 1 ⁄4 32 0.65 0.29 0.69 0.31
3 7
⁄4 20 1 ⁄16 37 1.1 0.49 1.1 0.50
5
1 25 1 ⁄8 41 1.6 0.74 1.6 0.75
A A 1
1 ⁄4 32 15
1 ⁄16 49 2.5 1.1 2.6 1.2
1 1
1 ⁄2 40 2 ⁄8 54 3.4 1.5 3.5 1.6
1
2 50 2 ⁄2 64 5.2 2.4 5.4 2.4
A
1 15
2 ⁄2 65 2 ⁄16 75 8.0 3.6 8.0 3.6
3
3 80 3 ⁄8 86 13 5.7 13 5.8
4 100 41⁄2 114 24 11 24 11

ALL ELBOWS & TEES 3⁄ 8" (10 DN) and LARGER ARE 100% GAS TESTED AT A MINIMUM OF 100 PSI. (6.9 bar)
PF – 70
Malleable Iron Fittings – Class 300
End to End Weight

Reducer Size
M black galv.
Figure 1167
NPS DN NPS DN in mm lbs kg lbs kg
3 1
⁄8 10 ⁄4 8 17⁄16 37 0.21 0.10 0.22 0.10
1
1
⁄4 8 0.31 0.14 0.31 0.14
⁄2 15 3
111⁄16 43
⁄8 10 0.34 0.15 0.36 0.16
1
⁄4 8 0.46* 0.21* 0.49* 0.22*
3 3
⁄4 20 ⁄8 10 13⁄4 44 0.47* 0.21* 0.48* 0.22*
1
⁄2 15 0.50 0.23 0.52 0.24
1
⁄4 8 0.66 0.30 0.68 0.31
3
⁄8 10 0.71 0.32 0.73 0.33
1 25 1
2 51
⁄2 15 0.71 0.32 0.75 0.34
3
⁄4 20 0.79 0.36 0.82 0.37
1
⁄2 15 1.1 0.51 1.1 0.52
11⁄4 32 3
⁄4 20 23⁄8 60 1.2 0.53 1.2* 0.55*
1 25 1.3 0.59 1.3* 0.57*
1
⁄2 15 1.5 0.68 1.5 0.70
3
M ⁄4 20 1.6 0.71 1.6 0.73
11⁄2 40 211⁄16 68
1 25 1.6 0.73 1.7 0.77
11⁄4 32 1.8 0.82 1.9 0.84
1
⁄2 15 2.4* 1.1* — —
3
⁄4 20 2.4 1.1 2.5 1.1
2 50 1 25 33⁄16 81 2.5 1.1 2.6 1.2
1
1 ⁄4 32 2.7 1.2 2.7 1.2
11⁄2 40 2.7 1.2 2.9 1.3
11⁄2 40 4.1 1.9 4.3 2.0
21⁄2 65 311⁄16 94
2 50 4.3 2.0 4.5 2.1
1
1 ⁄2 40 5.8* 2.6* 5.9* 2.7*
3 8 2 50 41⁄16 103 5.8 2.6 5.5 2.5
21⁄2 65 6.5 2.9 6.6 3.0
2 50 9.5 4.3 9.6 4.4
4 100 43⁄8 111
3 80 10.0 4.5 11 4.8
*POA
End Weight Height Weight

Cap Size
Coupling Size to End L black galv.
black galv. Figure 1163
Figure 1166 W
NPS DN in mm lbs kg bs kg 1 25
⁄4 8 ⁄32 20 0.10 0.05 0.11 0.05
1
⁄4 8 13⁄8 35 0.17 0.08 0.18 0.08 3
10 13
22 0.15 0.07 0.15 0.07
⁄8 ⁄16
3
⁄8 10 15⁄8 41 0.26 0.12 0.27 0.12 1
15 1 25 0.23 0.10 0.24 0.11
⁄2
1
⁄2 15 17⁄8 48 0.42 0.19 0.43 0.20 3
⁄4 20 11⁄16 27 0.35 0.16 0.36 0.16
3
⁄4 20 21⁄8 54 0.65 0.29 0.68 0.31
1 25 11⁄4 32 0.58 0.26 0.58 0.26
1 25 23⁄8 60 0.99 0.45 1.0 0.47 1
32 3
35 0.94 0.43 0.95 0.43
1 ⁄4 1 ⁄8
11⁄4 32 27⁄8 73 1.6 0.74 1.7 0.76 1
40 7
37 1.2 0.54 1.3 0.60
1 ⁄2 1 ⁄16
11⁄2 40 27⁄8 73 2.0 0.9 2.1 0.9 L
2 50 111⁄16 43 1.9 0.88 2.0 0.89
W 2 50 35⁄8 92 3.2 1.5 3.3 1.5
21⁄2 65 21⁄16 52 3.3 1.5 3.4 1.5
21⁄2 65 41⁄8 105 5.5 2.5 5.7 2.6
3 80 3
56 4.7 2.1 4.8 2.2
2 ⁄16
3 80 41⁄8 105 7.3 3.3 7.4 3.4
PF – 71
Malleable Iron Unions – Class 150; 250; 300
Copper or Copper Alloy to Iron

Weight
Size End to End
Unions black galv.
1 5
Class 150 Union ⁄8 6 1 ⁄16 33 0.15 0.07 0.15 0.07
■ Figure 463 †1⁄4 †8 113⁄16 47 0.46 0.21 0.47 0.21
3 13
150 lb. wsp † ⁄8 †10 1 ⁄16 47 0.42 0.19 0.43 0.20
300 lb. wog non-shock †1⁄2 †15 115⁄16 49 0.44 0.20 0.45 0.20
† UL Listed †3⁄4 †20 21⁄16 52 0.60 0.27 0.63 0.29
†3⁄4 x 1⁄2 †20 x 15 21⁄16 52 0.55 0.25 0.59 0.27
†1 †25 27⁄16 62 0.91 0.41 0.94 0.43
†11⁄4 †32 25⁄8 67 1.5 0.66 1.5 0.66
†11⁄2 †40 23⁄4 70 1.7 0.77 1.7 0.78
†2 †50 215⁄16 75 2.5 1.1 2.4 1.1
21⁄2 65 35⁄8 92 3.6 1.6 3.7 1.7
3 80 33⁄4 95 5.0 2.2 5.0 2.3
1
⁄8 6 15⁄16 33 0.14* 0.06* 0.14* 0.06*
Class 250 Union,
■ Figure 554 †1⁄4 †8 113⁄16 47 0.46 0.21 0.47 0.21
3
250lb. wsp † ⁄8 †10 113⁄16 47 0.42 0.19 0.43 0.20
500lb. wog non-shock †1⁄2 †15 21⁄16 52 0.53 0.24 0.54 0.24
† UL LIsted † 3⁄4 †20 21⁄4 57 0.80 0.36 0.82 0.37
†1 †25 29⁄16 65 1.3 0.58 1.3 0.59
†11⁄4 †32 23⁄4 70 1.6 0.74 1.6 0.75
†11⁄2 †40 3 76 2.1 0.9 2.1 1.0
†2 †50 33⁄8 86 3.5 1.6 3.5 1.6
21⁄2 65 37⁄8 98 5.3 2.4 5.4 2.4
3 80 41⁄4 108 7.6 3.4 7.8 3.5
4 100 47⁄8 124 18 7.9 18 8.1
1
⁄8 6 15⁄16 33 0.14 0.06 0.14 0.06
Class 300 union, 1
⁄4 8 113⁄16 47 0.47 0.21 0.48 0.22
■ Figure 459
3
300lb. wsp ⁄8 10 113⁄16 47 0.43 0.20 0.44 0.20
1
600lb wog non-shock ⁄2 15 21⁄16 52 0.53 0.24 0.55 0.25
3
⁄4 20 21⁄4 57 0.80 0.36 0.82 0.37
1 25 29⁄16 65 1.3 0.58 1.3 0.59
11⁄4 32 23⁄4 70 1.6 0.74 1.7 0.78
11⁄2 40 3 76 2.1 1.0 2.2 1.0
2 50 33⁄8 86 3.5 1.6 3.5 1.6
21⁄2 65 37⁄8 98 5.0 2.3 5.5 2.5
3 80 41⁄4 108 7.7 3.5 7.7 3.5
4 100 47⁄8 124 18 8.0 18 8.1
Class 300 union male and female 1
⁄2 15 3 76 0.62 0.28 — —
■ Figure 551
300lb. wsp 3
⁄4 20 33⁄16 81 0.92 0.42 — —
600lb wog non-shock
1 25 35⁄8 92 1.5 0.70 — —
11⁄2 40 41⁄4 108 2.6 1.2 2.7 1.2
2 50 45⁄8 117 2.4 1.1 — —
*POA
■ Pressure & Temperature rates shown on page PF-57
❑ Anvil Malleable Iron Unions conform to ASME B 16.39 and are in compliance with the requirements of the AAR
(1994 AAR Manual of standards and Practices).
❑ Dimensions conform to ASME B 16.39 for Class 150, 250 & 300 Unions.
PF – 72
Malleable Iron Unions – Class 150; 250; 300
Copper or Copper Alloy to Iron
Class 300 90° Elbow Center to End Weight

Size
Female Union Elbow Union black
Figure 552 300 lb. wsp NPS DN in mm in mm lbs kg
3
⁄8 10 11⁄16 27 21⁄16 52 0.51* 0.23*
1
⁄2 15 11⁄4 32 25⁄16 59 0.79* 0.36*
3
⁄4 20 17⁄16 37 23⁄4 70 1.2* 0.56*
1 25 15⁄8 41 3 76 1.9* 0.85*
*POA
All Iron Union Weight

Size End to End
Class 300 black galv.
Figure J-3 NPS DN in mm lbs kg lbs kg
1
⁄8 6 11⁄2 38 0.18* 0.08* 0.19 0.09
1
⁄4 8 15⁄8 41 0.28* 0.13* 0.29 0.13
3
⁄8 10 113⁄16 47 0.36* 0.16* 0.37* 0.17*
1
⁄2 15 21⁄8 54 0.56* 0.25* 0.57 0.26
3
⁄4 20 27⁄16 62 0.84* 0.38* 0.87 0.39
1 25 23⁄4 70 1.3* 0.58* 1.3 0.59
11⁄4 32 3 76 2.0* 0.9* 2.1 1.0
11⁄2 40 33⁄16 81 2.7* 1.2* 2.8 1.3
2 50 31⁄2 89 4.2* 1.9* 4.3 1.9
21⁄2 65 311⁄16 94 6.0* 2.7* 6.2 2.8
3 80 315⁄16 100 7.6* 3.4* 7.8 3.6
*POA / all black POA
Dart Union Weight

Bronze to Size A B C D
black galv.
Bronze Seat
Union
NPS DN in mm in mm in mm in mm lns kg lbs kg
Figure 0832
3
⁄8 10 13⁄4 44 15
⁄16 24 11⁄2 38 13⁄4 44 0.41 0.19 0.43 0.20
1 1 1 3
⁄2 15 2 ⁄8 54 1 ⁄8 29 1 ⁄16 30 2 51 0.58 0.26 0.61 0.28
3 5 3 3 1
⁄4 20 2 ⁄16 59 1 ⁄8 35 2 ⁄16 56 2 ⁄2 64 0.82 0.37 0.86 0.39
DART A
5 11 9
1 25 2 ⁄8 67 1 ⁄16 43 2 ⁄16 65 3 76 1.3 0.59 1.4 0.62
1 13 1 1 1
1 ⁄4 32 2 ⁄16 73 2 ⁄16 52 3 ⁄16 78 3 ⁄2 89 1.9 0.87 2.0* 0.9*
B
C on Flat 11⁄2 40 3 76 23⁄16 56 33⁄8 86 4 102 2.3 1.1 2.4 1.1
D on Flat 5 7 1 5
2 50 3 ⁄8 92 2 ⁄8 73 4 ⁄16 103 4 ⁄8 117 4.0 1.8 4.2 1.9
*POA
❑ Meets ASME B16.39 The standard union for most installations
3
⁄ 8 - 2 NPS (10 - 50 DN) – 300 lb (136 kg) steam working pressure at 450°F.
3
⁄ 8 - 2 NPS (10 - 50 DN) – 600 lb (272 kg) cold water, gas, or oil pressure - non-shock.
❑ Bronze Seat, on both sides of the joint. Resists corrosion.
❑ True bearing surfaces, unlike ordinary union seats.
❑ Bodies and nuts are high test air-refined malleable iron - generally superior to mild steel in most services.
❑ Can be repeatedly installed and removed.
❑ Straight way through. No cored parts to hold liquid or sediment.
❑ Extra heavy shoulder on swivel end and in the nut to st and pipe strains, vibration, and wrench abuse.
❑ Bronze Seat Ball Joint, with extra wide seating surfaces.
PF – 73
Notes
PF – 74
Cast Iron Fittings
Anvil standard and extra heavy cast iron threaded fittings are man- Anvil standard and extra heavy fittings in this section, sizes
ufactured in accordance with ASME-B16.4 (except plugs and bush- 1
⁄ 4 NPS - 12NPS (8 - 300 DN), are included in the “List of
ings, ASME B16.14). Dimensions also conform to Federal Inspected Fire Protection Equipment and Materials” issued
Specifications, WW-P-501(except plugs and bushings WW-P-471). by the Underwriters’ Laboratories, Inc.
Cast Iron Threaded Fittings

Pressure - Temperature Ratings
Pressure
Temperature
Class 125 Class 250
(°F) (°C) psi bar psi bar
-20° to 150° -28.9 to 65.6 175 12.1 400 27.6
200° 93.3 165 11.4 370 25.5
250° 121.1 150 10.3 340 23.4
300° 148.9 140 9.7 310 21.4
350° 176.7 125 8.6 300 20.7
400° 204.4 – – 250 17.2
PF – 75
Class 125, (Standard)
Weight
90° Elbow Straight Size A B
black galv.
Figure 351
1 1 13
⁄4 8 ⁄2 13 ⁄16 22 0.16 0.07 0.17 0.08
3 9 15
⁄8 10 ⁄16 14 ⁄16 24 0.25 0.11 0.26 0.12
1 11
⁄2 15 ⁄16 17 11⁄8 29 0.40 0.18 0.41 0.19
3 13
⁄4 20 ⁄16 22 15⁄16 33 0.60 0.27 0.61 0.28
15 1
1 25 ⁄16 24 1 ⁄2 38 0.92 0.42 0.95 0.43
11⁄4 32 11⁄8 29 13⁄4 44 1.4 0.65 1.5 0.66
B 11⁄2 40 15⁄16 33 115⁄16 49 2.0 0.88 2.0 0.91

A 2 50 19⁄16 40 21⁄4 57 3.1 1.4 3.2 1.5
1 13 11
2 ⁄2 65 1 ⁄16 47 2 ⁄16 68 4.9 2.2 5.1 2.3
3 80 23⁄16 56 31⁄8 79 7.2 3.3 7.4 3.4
BA 4 100 211⁄16 68 313⁄16 98 12 5.5 13 5.7
5 1
5 125 3 ⁄16 84 4 ⁄2 114 21 10 — —
7 1
6 150 3 ⁄8 98 5 ⁄8 130 31 14 33 15
8 200 53⁄16 132 69⁄16 167 65 29 67 30
90° Elbow 45° Elbow

Flanged and Threaded Figure 371 Flanged and Threaded
Figure 372
B
A
A B
B
B
Weight
Size A B
black
Weight
NPS DN in mm in mm lbs kg Size A B
black
21⁄2 65 113⁄16 47 211⁄16 68 10 4.6 NPS DN in mm in mm lbs kg
3 80 23⁄16 56 31⁄8 79 13 6.0 4 100 19⁄16 40 25⁄8 67 20 9.0
4 100 211⁄16 68 313⁄16 98 22 10
6 150 23⁄16 56 37⁄16 87 35 16

5 125 35⁄16 84 41⁄2 114 28 13
6 150 37⁄8 98 51⁄8 130 41 18

8 200 27⁄8 73 41⁄4 108 64 29
8 200 53⁄16 132 69⁄16 167 80 36
•Nominal Pipe Sizes of 4" (100 DN) and larger have two holes tapped
for stud or tap bolts.
PF – 76
Weight
22 1⁄ 2° Elbow Size A B
black
Figure 356A
3 3 7
⁄4 20 ⁄8 10 ⁄8 22 0.52 0.24
7
1 25 ⁄16 11 1 25 0.80 0.36
11⁄4 32 1
⁄2 13 11⁄8 29 1.4 0.64
B 11⁄2 40 5
⁄8 16 11⁄4 32 1.6 0.74
A
3
2 50 ⁄4 19 17⁄16 37 2.5 1.1
A
B
Note: See page PF-75 for
21⁄2 65 3
⁄4 19 15⁄8 41 4.0 1.8 pressure-temperature ratings.
Galvanized Not Steel
Weight
45° Elbow Size A B
black galv.
Figure 356
NPS Dn in mm in mm lbs kg lbs kg
1 7 3
⁄4 8 ⁄16 11 ⁄4 19 0.16 0.07 0.17 0.08
3 7 13
⁄8 10 ⁄16 11 ⁄16 22 0.23 0.10 — —
1 7 7
⁄2 15 ⁄16 11 ⁄8 22 0.37 0.17 0.38 0.17
3 1
⁄4 20 ⁄2 13 1 25 0.55 0.25 0.56 0.25
9 1
1* 25 ⁄16 14 1 ⁄8 29 0.83 0.38 0.88 0.40
11⁄4 32 5
⁄8 16 11⁄4 32 1.3 0.60 1.4 0.62
11⁄2 40 13
⁄16 22 17⁄16 37 1.8 0.81 1.8 0.83
B 11
A 2 50 1 25 1 ⁄16 43 2.9 1.3 3.0 1.3
1 1 15
2 ⁄2 65 1 ⁄16 27 1 ⁄16 49 4.3 1.9 4.3 2.0
3 3
3 80 1 ⁄16 30 2 ⁄16 56 6.4 2.9 6.7 3.0
BA 31⁄2 90 13⁄8 35 23⁄8 60 8.4 3.8 — —
9 5
4 100 1 ⁄16 40 2 ⁄8 67 11 4.8 11 5.1
7 1
5 125 1 ⁄8 48 3 ⁄16 78 17 7.7 17 7.9
3 7
* 1 NPS (25 DN) size available in 6 150 2 ⁄16 56 3 ⁄16 87 26 12 26 12
1 NPS x 1⁄ 2 NPS (25 x 15 DN) reducing size,
black or galvanized.
8 200 27⁄8 73 41⁄4 108 50 23 52 24
Weight
Straight Tee Size A B
black galv.
Figure 358
NPS Dn in mm in mm lbs kg lbs kg
1 1 13
⁄4 8 ⁄2 13 ⁄16 22 0.22 0.10 0.23 0.10
3 5
⁄8 10 ⁄8 16 1 25 0.35 0.16 0.36 0.16
1 11
⁄2 15 ⁄16 17 11⁄8 29 0.56 0.25 0.58 0.26
3 13
⁄4 20 ⁄16 22 15⁄16 33 0.84 0.38 0.85 0.39
15
1 25 ⁄16 24 11⁄2 38 1.3 0.57 1.3 0.59
11⁄4 32 11⁄8 29 13⁄4 44 2.0 0.9 2.1 0.9
11⁄2 40 15⁄16 33 115⁄16 49 2.7 1.2 2.7 1.2
B B 2 50 19⁄16 40 21⁄4 57 4.2 1.9 4.3 2.0
21⁄2 65 113⁄16 47 211⁄16 68 6.7 3.0 6.8 3.1
A A 3 80 23⁄16 56 31⁄8 79 10.0 4.5 10 4.6
31⁄2 90 27⁄16 62 37⁄16 87 13 6.0 14 6.3
A B 4 100 211⁄16 68 33⁄4 95 16 7.4 17 7.7
5 125 35⁄16 84 41⁄2 114 27 12 28 13
6 150 37⁄8 98 51⁄8 130 41 19 41 19
8 200 53⁄16 132 69⁄16 167 79 36 81 37
PF – 77
90° Reducing
Elbow - Figure 352
D
B
C A
Weight
Size A B C D
black
1 5 3
1
⁄4 8 ⁄8 16 ⁄4 19 11⁄16 27 11⁄16 27 0.40 0.18
⁄2 15 3 5 11
⁄8 10 ⁄8 16 ⁄16 17 11⁄16 27 11⁄16 27 0.34 0.15
3 1 11 13 1
⁄4 20 ⁄2 15 ⁄16 17 ⁄16 22 1 ⁄4 32 11⁄4 32 0.51 0.23
1 11 15
⁄2 15 ⁄16 17 ⁄16 24 13⁄8 35 13⁄8 35 0.67 0.30
1 25 3 13 15
⁄4 20 ⁄16 22 ⁄16 24 17⁄16 37 17⁄16 37 0.76 0.34
1 11 1 1 1
⁄2 15 ⁄16 17 1 ⁄16 27 1 ⁄2 38 1 ⁄2 38 1.1 0.49
11⁄4 32 3
⁄4 20 13
⁄16 22 11⁄8 29 15⁄8 41 15⁄8 41 1.0 0.46
15
1 25 ⁄16 24 11⁄8 29 111⁄16 43 111⁄16 43 1.2 0.55
1 3 1 5 5
⁄2 15 ⁄4 19 1 ⁄4 32 1 ⁄8 41 1 ⁄8 41 1.5 0.69
3 7 5 13 13
⁄4 20 ⁄8 22 1 ⁄16 33 1 ⁄16 47 1 ⁄16 47 1.6 0.70
11⁄2 40
1 25 1 25 11⁄4 32 113⁄16 47 113⁄16 47 1.4 0.65
11⁄4 32 13⁄16 30 11⁄4 32 17⁄8 48 17⁄8 48 1.7 0.79
1 3 7 3 3
⁄2 15 1 ⁄16 30 1 ⁄16 37 1 ⁄8 35 1 ⁄8 35 2.2 1.0
3 5 1
⁄4 20 1 ⁄16 33 1 ⁄2 38 2 51 2 51 2.2 1.0
2 50 1 25 11⁄16 27 17⁄16 37 2 51 2 51 2.1 0.9
11⁄4 32 13⁄16 30 17⁄16 37 21⁄16 52 21⁄16 52 2.3 1.1
1 5 1 1 1
1 ⁄2 40 1 ⁄16 33 1 ⁄2 38 2 ⁄8 54 2 ⁄8 54 2.6 1.2
1 25 1 25 13⁄4 44 25⁄16 59 25⁄16 59 2.9 1.3
11⁄4 32 13⁄16 30 13⁄4 44 23⁄8 60 23⁄8 60 3.4 1.5
21⁄2 65
11⁄2 40 15⁄16 33 113⁄16 47 27⁄16 62 27⁄16 62 3.7 1.7
9 7 9 9
2 50 1 ⁄16 40 1 ⁄8 48 2 ⁄16 65 2 ⁄16 65 4.0 1.8
11⁄4 32 15⁄8 41 25⁄16 59 215⁄16 75 215⁄16 75 6.0 2.7
11⁄2 40 15⁄8 41 25⁄16 59 215⁄16 75 215⁄16 75 5.7 2.6
3 80 5 1 15 15
2 50 1 ⁄8 41 2 ⁄4 57 2 ⁄16 75 2 ⁄16 75 5.7 2.6
1 7 3 1 1
2 ⁄2 65 1 ⁄8 48 2 ⁄16 56 3 ⁄16 78 3 ⁄16 78 6.4 2.9
31⁄2 90 3 80 23⁄16 56 27⁄16 62 33⁄8 86 33⁄8 86 8.9 4.1
2 50 23⁄16 56 215⁄16 75 35⁄8 92 35⁄8 92 12 5.4
1 3 3 5 5
2 ⁄2 65 2 ⁄16 56 2 ⁄4 70 3 ⁄8 92 3 ⁄8 92 11 5.1
4 100 3 11 5 5
3 80 2 ⁄16 56 2 ⁄16 68 3 ⁄8 92 3 ⁄8 92 11 4.8
31⁄2 90 27⁄16 62 211⁄16 68 311⁄16 94 311⁄16 94 12 5.4
21⁄2 65 213⁄16 73 31⁄2 89 43⁄8 111 43⁄8 111 20 9.0
13 7 3 3
5 125 3 80 2 ⁄16 73 3 ⁄16 87 4 ⁄8 111 4 ⁄8 111 19 8.6
4 100 213⁄16 73 35⁄16 84 43⁄8 111 43⁄8 111 16 7.5
3 80 25⁄16 59 313⁄16 98 413⁄16 124 413⁄16 124 19 8.8
6 150 4 100 213⁄16 73 37⁄8 98 415⁄16 125 415⁄16 125 24 11
3 13
5 125 3 ⁄8 86 3 ⁄16 98 5 127 5 127 27 12
8 200 6 150 43⁄16 106 51⁄8 130 63⁄8 162 63⁄8 162 51 23
PF – 78
Reducing Tee
Figure 359 D E
A B
C F
Reducing Tee: Figure 359

Wt.
Size A B C D E F
black galv.
NPS Dn NPS DN NPS DN in mm in mm in mm in mm in mm in mm lns kg lbs kg
1 11 11 13
⁄4 8 ⁄16 17 ⁄16 17 ⁄16 22 11⁄8 29 11⁄8 29 11⁄8 29 0.57 0.26 – –
3 11 11 3
1 1
⁄8 10 ⁄16 17 ⁄16 17 ⁄4 19 11⁄8 29 11⁄8 29 11⁄8 29 0.57 0.26 – –
⁄2 15 ⁄2 15 3 13 13 11
⁄4 20 ⁄16 22 ⁄16 22 ⁄16 17 11⁄4 32 11⁄4 32 13
⁄16 22 0.68 0.31 – –
13
1 25 1 25 1 25 ⁄16 22 17⁄16 37 17⁄16 37 13⁄8 35 1.00 0.45 – –
1 3 13 15 13 15
⁄4 8 ⁄4 20 ⁄16 22 ⁄16 24 ⁄16 22 ⁄16 24 11⁄4 32 15
⁄16 24 0.79 0.36 – –
1 11 11 13 13
1
⁄2 15 ⁄16 17 ⁄16 17 ⁄16 22 ⁄16 22 11⁄8 29 11⁄4 32 0.64 0.29 – –
⁄2 15 3 13 13 13 15
⁄4 20 ⁄16 22 ⁄16 22 ⁄16 22 ⁄16 24 11⁄4 32 15
⁄16 24 0.75 0.34 – –
3 1 9 9 7 11 11 13
⁄4 20 ⁄4 8 ⁄16 14 ⁄16 14 ⁄8 22 ⁄16 17 ⁄16 17 ⁄16 22 0.62 0.28 – –
3 11 11 15 13 13
3
⁄8 10 ⁄16 17 ⁄16 17 ⁄16 24 ⁄16 22 ⁄16 22 11⁄4 32 0.75 0.34 – –
⁄4 20 1 11 11 13 13 13
⁄2 15 ⁄16 17 ⁄16 17 ⁄16 22 ⁄16 22 ⁄16 22 11⁄4 32 0.76 0.34 – –
15 15 13
1 25 ⁄16 24 ⁄16 24 ⁄16 22 17⁄16 37 17⁄16 37 13⁄8 35 0.99 0.45 – –
1 15 15 15
⁄4 8 1 25 ⁄16 24 ⁄16 24 ⁄16 24 11⁄2 38 11⁄4 32 11⁄2 38 1.1 0.49 – –
1 11 3 15
⁄2 15 ⁄16 17 ⁄4 19 ⁄16 24 11⁄4 32 13
⁄16 22 13⁄8 35 0.90 0.41 – –
1 3 13 13 15
⁄2 15 ⁄4 20 ⁄16 22 ⁄16 22 ⁄16 24 13⁄8 35 11⁄4 32 17⁄16 37 0.91 0.41 – –
15 15 15
1 25 ⁄16 24 ⁄16 24 ⁄16 24 11⁄2 38 13⁄8 35 11⁄2 38 1.1 0.49 – –
1 11 11 15
⁄2 15 ⁄16 17 ⁄16 17 ⁄16 24 11⁄4 32 13
⁄16 22 13⁄8 35 0.89 0.40 – –
3 3 13 13 15
⁄4 20 ⁄4 20 ⁄16 22 ⁄16 22 ⁄16 24 13⁄8 35 15
⁄16 24 17⁄16 37 1.00 0.45 – –
1 25 15 15 15
1 25 ⁄16 24 ⁄16 24 ⁄16 24 11⁄2 38 17⁄16 37 11⁄2 38 1.1 0.51 – –
1 11 11
⁄4 8 ⁄16 17 ⁄16 17 11⁄8 29 11⁄8 29 11⁄4 32 13⁄8 35 1.0 0.46 – –
1 11 11 15
⁄2 15 ⁄16 17 ⁄16 17 ⁄16 24 11⁄4 32 11⁄4 32 13⁄8 35 1.0 0.46 1.0 0.47
3 13 13 15
1 25 ⁄4 20 ⁄16 22 ⁄16 22 ⁄16 24 13⁄8 35 13⁄8 35 17⁄16 37 1.1 0.50 – –
11⁄4 32 11⁄8 29 11⁄8 29 15
⁄16 24 111⁄16 43 111⁄16 43 19⁄16 40 1.5 0.68 – –
11⁄2 40 11⁄4 32 11⁄4 32 1 25 113⁄16 47 113⁄16 47 15⁄8 41 1.8 0.83 – –
1 13 13
⁄2 15 ⁄16 22 ⁄16 22 11⁄8 29 17⁄16 37 15
⁄16 24 15⁄8 41 1.00 0.45 – –
1 15 15
⁄2 15 1 25 ⁄16 24 ⁄16 24 11⁄8 29 19⁄16 40 13⁄8 35 111⁄16 43 1.4 0.63 – –
11⁄4 32 11⁄8 29 11⁄8 29 11⁄8 29 13⁄4 44 19⁄16 40 13⁄4 44 1.6 0.74 – –
3 13 13
⁄4 20 ⁄16 22 ⁄16 22 11⁄8 29 17⁄16 37 15
⁄16 24 15⁄8 41 1.3 0.58 – –
3 15 15
⁄4 20 1 25 ⁄16 24 ⁄16 24 11⁄8 29 19⁄16 40 17⁄16 37 111⁄16 43 1.4 0.65 – –
11⁄4 32 11⁄8 29 11⁄8 29 11⁄8 29 13⁄4 44 15⁄8 41 13⁄4 44 1.7 0.78 – –
1 11 11
⁄2 15 ⁄16 17 ⁄16 17 11⁄8 29 15
⁄16 24 11⁄4 32 19⁄16 40 1.3 0.58 1.3 0.59
3 13 13
⁄4 20 ⁄16 22 ⁄16 22 11⁄8 29 17⁄16 37 13⁄8 35 15⁄8 41 1.4 0.62 – –
11⁄4 32 1 25 15
⁄16 24 15
⁄16 24 11⁄8 29 19⁄16 40 19⁄16 40 111⁄16 43 1.5 0.69 1.6 0.71
1 25
11⁄4 32 11⁄8 29 11⁄8 29 11⁄8 29 13⁄4 44 111⁄16 43 13⁄4 44 1.8 0.81 – –
11⁄2 40 11⁄4 32 11⁄4 32 13
⁄16 22 17⁄8 48 113⁄16 47 113⁄16 47 2.1 0.9 – –
2 50 17⁄16 37 17⁄16 37 13
⁄16 22 21⁄16 52 2 51 17⁄8 48 2.7 1.2 – –
1 11 11
⁄2 15 ⁄16 17 ⁄16 17 11⁄8 29 15
⁄16 24 15
⁄16 24 19⁄16 40 1.5 0.67 – –
3 13 13
⁄4 20 ⁄16 22 ⁄16 22 11⁄8 29 17⁄16 37 17⁄16 37 15⁄8 41 1.6 0.71 – –
11⁄4 32 1 25 15
⁄16 24 15
⁄16 24 11⁄8 29 19⁄16 40 19⁄16 40 111⁄16 43 1.7 0.78 – –
11⁄2 40 11⁄4 32 11⁄4 32 13
⁄16 22 17⁄8 48 17⁄8 48 113⁄16 47 2.3 1.0 – –
2 50 17⁄16 37 17⁄16 37 13
⁄16 22 21⁄16 52 21⁄16 52 17⁄8 48 2.8 1.3 – –
See additional sizes on following page.

PF – 79

Wt.
Size A B C D E F
black galv.
1 13 1 1 13 9 7
1
1 ⁄4 32 ⁄16 22 1 ⁄8 29 1 ⁄4 32 1 ⁄16 47 1 ⁄16 40 1 ⁄8 48 1.9 0.88 – –
⁄2 15
11⁄2 40 15
⁄16 24 11⁄4 32 15
⁄16 24 115⁄16 49 111⁄16 43 115⁄16 49 2.1 1.0 – –
3
⁄4 20 11⁄2 40 15
⁄16 24 11⁄4 32 15
⁄16 24 115⁄16 49 13⁄4 44 115⁄16 49 2.2 1.0 – –
1 13 3
⁄2 15 ⁄16 22 ⁄4 19 11⁄4 32 17⁄16 37 15
⁄16 24 111⁄16 43 1.8 0.79 – –
3 7 13
⁄4 20 ⁄8 22 ⁄16 22 11⁄4 32 11⁄2 38 13⁄8 35 13⁄4 44 1.7 0.77 – –
15
1 25 1 25 ⁄16 24 11⁄4 32 15⁄8 41 11⁄2 38 113⁄16 47 1.7 0.78 – –
1 25
11⁄4 32 13
⁄16 22 11⁄8 29 11⁄4 32 113⁄16 47 111⁄16 43 17⁄8 48 2.1 0.9 – –
11⁄2 40 15
⁄16 24 11⁄4 32 15
⁄16 24 115⁄16 49 113⁄16 47 115⁄16 49 2.3 1.0 – –
2 50 11⁄2 38 17⁄16 37 15
⁄16 24 21⁄8 54 2 51 2 51 2.9 1.3 – –
1 13 11
⁄2 15 ⁄16 22 ⁄16 17 11⁄4 32 17⁄16 37 15
⁄16 24 111⁄16 43 1.7 0.76 1.7 0.78
11⁄2 40 3
⁄4 20 7
⁄8 22 13
⁄16 22 11⁄4 32 11⁄2 38 17⁄16 37 13⁄4 44 1.8 0.81 – –
15
1 25 1 25 ⁄16 24 11⁄4 32 15⁄8 41 19⁄16 40 113⁄16 47 2.0 0.89 2.0 0.9
11⁄4 32
11⁄4 32 13
⁄16 22 11⁄8 29 11⁄4 32 113⁄16 47 13⁄4 44 17⁄8 48 2.3 1.0 – –
11⁄2 40 15
⁄16 24 11⁄4 32 15
⁄16 24 115⁄16 49 17⁄8 48 115⁄16 49 2.5 1.1 – –
2 50 11⁄2 38 17⁄16 37 15
⁄16 24 21⁄8 54 21⁄16 52 2 51 3.1 1.4 – –
1 13 13
⁄2 15 ⁄16 22 ⁄16 22 11⁄4 32 17⁄16 37 17⁄16 37 111⁄16 43 1.8 0.83 – –
3 7 7
⁄4 20 ⁄8 22 ⁄8 22 11⁄4 32 11⁄2 38 11⁄2 38 13⁄4 44 2.0 0.88 – –
1 25 1 25 1 25 11⁄4 32 15⁄8 41 15⁄8 41 113⁄16 47 2.1 1.0 2.2 1.0
11⁄2 40
11⁄4 32 13
⁄16 22 13
⁄16 22 11⁄4 32 113⁄16 47 113⁄16 47 17⁄8 48 2.4 1.1 – –
2 50 11⁄2 38 11⁄2 38 15
⁄16 24 21⁄8 54 21⁄8 54 2 51 3.2 1.5 – –
21⁄2 65 113⁄16 47 113⁄16 47 15
⁄16 24 27⁄16 62 27⁄16 62 23⁄16 56 4.2 1.9 – –
1
11⁄2 40 15
⁄16 24 13⁄8 35 11⁄2 38 2 51 113⁄16 47 21⁄8 54 3.0 1.3 – –
⁄2 15
2 50 19⁄16 40 17⁄16 37 19⁄16 40 21⁄4 57 17⁄8 48 21⁄4 57 3.3 1.5 – –
11⁄4 32 13
⁄16 22 11⁄8 29 17⁄16 37 17⁄8 48 13⁄4 44 21⁄16 52 2.5 1.1 – –
3
⁄4 20 11⁄2 40 15
⁄16 24 15
⁄16 24 11⁄2 38 2 51 113⁄16 47 21⁄8 54 3.4 1.5 – –
2 50 19⁄16 40 17⁄16 37 19⁄16 40 21⁄4 57 115⁄16 49 21⁄4 57 3.3 1.5 – –
11 11
1 25 ⁄16 17 ⁄16 17 17⁄16 37 13⁄4 44 15⁄8 41 2 51 2.7 1.2 – –
11⁄4 32 13
⁄16 22 11⁄8 29 11⁄2 38 17⁄8 48 13⁄4 44 21⁄16 52 2.9 1.3 – –
1 25 11⁄2 40 15
⁄16 24 11⁄4 32 11⁄2 38 2 51 113⁄16 47 21⁄8 54 2.9 1.3 – –
2 50 19⁄16 40 17⁄16 37 19⁄16 40 21⁄4 57 2 51 21⁄4 57 3.5 1.6 – –
21⁄2 65 17⁄8 48 113⁄16 47 19⁄16 40 29⁄16 65 23⁄8 60 27⁄16 62 4.9 2.2 – –
1 11
⁄2 15 ⁄16 17 1 25 17⁄16 37 13⁄4 44 15⁄8 41 2 51 2.5 1.1 – –
3 7 7
⁄4 20 ⁄8 22 ⁄8 22 17⁄16 37 19⁄16 40 11⁄2 38 115⁄16 49 2.5 1.1 – –
11
1 25 ⁄16 17 1 25 17⁄16 37 13⁄4 44 15⁄8 41 2 51 2.7 1.2 – –
11⁄4 32 11⁄4 32 13
⁄16 22 11⁄8 29 17⁄16 37 17⁄8 48 13⁄4 44 21⁄16 52 2.9 1.3 – –
11⁄2 40 15
⁄16 24 11⁄4 32 11⁄2 38 2 51 17⁄8 48 21⁄8 54 3.1 1.4 – –
2 2 2 50 19⁄16 40 17⁄16 37 19⁄16 40 21⁄4 57 21⁄16 52 21⁄4 57 3.7 1.7 – –
21⁄2 65 17⁄8 48 13⁄4 44 19⁄16 40 29⁄16 65 23⁄8 60 27⁄16 62 4.5 2.1 – –
1 13 13
⁄2 15 ⁄16 22 ⁄16 22 17⁄16 37 11⁄2 38 17⁄16 37 17⁄8 48 2.3 1.1 2.4 1.1
3 7 7
⁄4 20 ⁄8 22 ⁄8 22 17⁄16 37 19⁄16 40 11⁄2 38 115⁄16 49 2.5 1.1 – –
11
1 25 ⁄16 17 1 25 17⁄16 37 13⁄4 44 15⁄8 41 2 51 2.7 1.2 – –
11⁄2 40 11⁄4 32 13
⁄16 22 13
⁄16 22 17⁄16 37 17⁄8 48 113⁄16 47 21⁄16 52 3.0 1.4 – –
11⁄2 40 15
⁄16 24 15
⁄16 24 11⁄2 38 2 51 115⁄16 49 21⁄8 54 3.2 1.5 – –
2 50 19⁄16 40 11⁄2 38 19⁄16 40 21⁄4 57 21⁄8 54 21⁄4 57 3.7 1.7 – –
21⁄2 65 17⁄8 48 115⁄16 49 19⁄16 40 29⁄16 65 29⁄16 65 27⁄16 62 5.5 2.5 – –
1 13 13
⁄2 15 ⁄16 22 ⁄16 22 17⁄16 37 11⁄2 38 11⁄2 38 17⁄8 48 2.7 1.2 2.8 1.3
3 7 7
⁄4 20 ⁄8 22 ⁄8 22 17⁄16 37 19⁄16 40 19⁄16 40 115⁄16 49 2.9 1.3 – –
11 11
1 25 ⁄16 17 ⁄16 17 17⁄16 37 13⁄4 44 13⁄4 44 2 51 3.0 1.4 3.1 1.4
2 50 11⁄4 32 13
⁄16 22 13
⁄16 22 1716 37 17⁄8 48 17⁄8 48 21⁄16 52 3.4 1.5 – –
11⁄2 40 15
⁄16 24 15
⁄16 24 11⁄2 38 2 51 2 51 21⁄8 54 3.6 1.6 3.7 1.7
21⁄2 65 17⁄8 48 17⁄8 48 19⁄16 40 29⁄16 65 29⁄16 65 27⁄16 62 5.2 2.3 5.4 2.4
4 100 3 76 3 76 27⁄16 62 311⁄16 94 311⁄16 94 31⁄2 89 16 7.3 – –
See additional sizes on previous and following page. Note: See page PF-75 for pressure-temperature ratings.
PF – 80

Wt.
Size A B C D E F
black galv.
9 11 7 7 1 9
1
2 50 1 ⁄16 40 1 ⁄16 43 1 ⁄8 48 2 ⁄16 62 2 ⁄8 54 2 ⁄16 65 5.3 2.4 – –
⁄2 15
21⁄2 65 113⁄16 47 113⁄16 47 113⁄16 47 211⁄16 68 21⁄4 57 211⁄16 68 5.2 2.4 – –
3
⁄4 20 21⁄2 65 113⁄16 47 13⁄4 44 113⁄16 47 211⁄16 68 21⁄4 57 211⁄16 68 5.1 2.3 – –
2 50 19⁄16 40 19⁄16 40 17⁄8 48 27⁄16 62 21⁄8 54 29⁄16 65 5.0 2.3 – –
1 25
21⁄2 65 113⁄16 47 13⁄4 44 113⁄16 47 211⁄16 68 25⁄16 59 211⁄16 68 5.4 2.4 – –
11⁄2 40 15
⁄16 24 15
⁄16 24 113⁄16 47 23⁄16 56 115⁄16 49 27⁄16 62 4.3 1.9 – –
11⁄4 32 2 50 19⁄16 40 11⁄2 38 17⁄8 48 27⁄16 62 21⁄8 54 29⁄16 65 5.0 2.2 – –
21⁄2 65 113⁄16 47 13⁄4 44 113⁄16 47 211⁄16 68 23⁄8 60 211⁄16 68 5.4 2.4 – –
11⁄2 40 15
⁄16 24 15
⁄16 24 113⁄16 47 23⁄16 56 115⁄16 49 27⁄16 62 4.2 1.9 – –
11⁄2 40 2 50 19⁄16 40 11⁄2 38 17⁄8 48 27⁄16 62 21⁄8 54 29⁄16 65 4.8 2.2 – –
21⁄2 65 113⁄16 47 113⁄16 47 113⁄16 47 211⁄16 68 27⁄16 62 211⁄16 68 5.8 2.6 – –
1 3 13
⁄2 15 ⁄4 19 ⁄16 22 13⁄4 44 111⁄16 43 11⁄2 38 23⁄16 56 3.6 1.6 – –
21⁄2 65 3
⁄4 20 7
⁄8 22 7
⁄8 22 13⁄4 44 13⁄4 44 19⁄16 40 21⁄4 57 3.6 1.6 – –
11
1 25 1 25 ⁄16 17 13⁄4 44 115⁄16 49 13⁄4 44 25⁄16 59 3.9 1.8 – –
2 50 11⁄4 32 13
⁄16 22 13
⁄16 22 13⁄4 44 21⁄16 52 17⁄8 48 23⁄8 60 4.3 1.9 – –
11⁄2 40 15
⁄16 24 15
⁄16 24 113⁄16 47 23⁄16 56 2 51 27⁄16 62 4.4 2.0 – –
2 50 19⁄16 40 19⁄16 40 17⁄8 48 27⁄16 62 21⁄4 57 29⁄16 65 5.2 2.3 – –
21⁄2 65 113⁄16 47 17⁄8 48 113⁄16 47 211⁄16 68 29⁄16 65 211⁄16 68 6.0 2.7 – –
1 3 3
⁄2 15 ⁄4 19 ⁄4 19 13⁄4 44 111⁄16 43 111⁄16 43 23⁄16 56 4.0 1.8 – –
3 7 7
⁄4 20 ⁄8 22 ⁄8 22 13⁄4 44 13⁄4 44 13⁄4 44 21⁄4 57 4.3 1.9 – –
1 25 1 25 1 25 13⁄4 44 115⁄16 49 115⁄16 49 25⁄16 59 4.5 2.0 – –
21⁄2 65 11⁄4 32 13
⁄16 22 13
⁄16 22 13⁄4 44 21⁄16 52 21⁄16 52 23⁄8 60 4.8 2.2 – –
11⁄2 40 15
⁄16 24 15
⁄16 24 113⁄16 47 23⁄16 56 23⁄16 56 27⁄16 62 5.1 2.3 – –
2 50 19⁄16 40 19⁄16 40 17⁄8 48 27⁄16 62 27⁄16 62 29⁄16 65 5.9 2.7 6.0 2.7
4 100 23⁄4 70 213⁄16 73 27⁄16 62 311⁄16 94 311⁄16 94 31⁄2 89 14 6.4 – –
1
⁄2 15 3 80 21⁄8 54 21⁄4 57 21⁄8 54 31⁄8 79 211⁄16 68 31⁄8 79 7.6 3.4 – –
3
⁄4 20 3 80 21⁄8 54 21⁄8 54 21⁄8 54 31⁄8 79 211⁄16 68 31⁄8 79 8.3 3.7 – –
1 25 3 80 21⁄8 54 21⁄8 54 21⁄8 54 31⁄8 79 211⁄16 68 31⁄8 79 8.3 3.8 – –
11⁄4 32 3 80 21⁄8 54 21⁄8 54 21⁄8 54 31⁄8 79 213⁄16 73 31⁄8 79 8.5 3.8 – –
11⁄2 40 21⁄2 65 17⁄8 48 17⁄8 48 21⁄8 54 213⁄16 73 29⁄16 65 31⁄16 78 7.7 3.5 – –
11⁄2 40 3 80 21⁄8 54 23⁄16 56 21⁄8 54 31⁄8 79 213⁄16 73 31⁄8 79 8.1 3.7 – –
11⁄2 40 13⁄8 35 11⁄2 38 23⁄16 56 25⁄16 59 23⁄16 56 213⁄16 73 6.8 3.1 – –
2 50 19⁄16 40 19⁄16 40 23⁄16 56 29⁄16 65 21⁄4 57 215⁄16 75 7.3 3.3 – –
2 50
21⁄2 65 17⁄8 48 115⁄16 49 21⁄8 54 213⁄16 73 29⁄16 65 31⁄16 78 7.1 3.2 – –
3 80 21⁄8 54 23⁄16 56 21⁄8 54 31⁄8 79 215⁄16 75 31⁄8 79 8.8 4.0 – –
15
1 25 1 25 ⁄16 24 21⁄8 54 21⁄16 52 115⁄16 49 211⁄16 68 5.5 2.5 – –
11⁄4 32 11⁄4 32 13
⁄16 22 21⁄8 54 23⁄16 56 21⁄16 52 23⁄4 70 5.9 2.7 – –
11⁄2 40 13⁄8 35 15
⁄16 24 23⁄16 56 25⁄16 59 23⁄16 56 213⁄16 73 6.2 2.8 6.3 2.9
3 80 21⁄2 65
2 50 19⁄16 40 11⁄2 38 23⁄16 56 29⁄16 65 27⁄16 62 215⁄16 75 6.8 3.1 – –
21⁄2 65 17⁄8 48 113⁄16 47 21⁄8 54 213⁄16 73 211⁄16 68 31⁄16 78 7.7 3.5 – –
3 80 21⁄8 54 21⁄8 54 21⁄8 54 31⁄8 79 31⁄16 78 31⁄8 79 9.1 4.1 – –
1 15 15
⁄2 15 ⁄16 24 ⁄16 24 23⁄16 56 17⁄8 48 17⁄8 48 25⁄8 67 6.1 2.8 6.2 2.8
3 15 15
⁄4 20 ⁄16 24 ⁄16 24 21⁄8 54 17⁄8 48 17⁄8 48 25⁄8 67 6.1 2.7 6.2 2.8
1 25 1 25 1 25 21⁄8 54 21⁄16 52 21⁄16 52 211⁄16 68 6.3 2.8 6.5 3.0
11⁄4 32 11⁄4 32 11⁄4 32 21⁄8 54 23⁄16 56 23⁄16 56 23⁄4 70 6.8 3.1 – –
11⁄2 40 13⁄8 35 13⁄8 35 23⁄16 56 25⁄16 59 25⁄16 59 215⁄16 75 7.1 3.2 7.3 3.3
3 80
2 50 19⁄16 40 19⁄16 40 23⁄16 56 29⁄16 65 29⁄16 65 27⁄8 73 7.8 3.5 7.8 3.6
21⁄2 65 17⁄8 48 17⁄8 48 21⁄8 54 213⁄16 73 213⁄16 73 31⁄16 78 8.9 4.0 9.0 4.1
31⁄2 90 23⁄8 60 23⁄8 60 23⁄16 56 33⁄8 86 33⁄8 86 33⁄16 81 11 5.0 – –
4 100 211⁄16 68 211⁄16 68 27⁄16 62 311⁄16 94 311⁄16 94 31⁄2 89 13 5.8 – –
5 125 33⁄8 86 35⁄16 84 29⁄16 65 45⁄16 110 45⁄16 110 33⁄4 95 20 9 – –
PF – 81

Wt.
Size A B C D E F
black galv.
1 3 1 3 3 1 3
1 ⁄4 32 3 80 2 ⁄16 56 2 ⁄2 64 2 ⁄8 60 3 ⁄16 81 3 ⁄8 79 3 ⁄8 86 13 5.7 – –
2 50 31⁄2 90 27⁄16 62 27⁄16 62 27⁄16 62 37⁄16 87 35⁄16 84 37⁄16 87 13 5.9 – –
21⁄2 65 115⁄16 49 115⁄16 49 23⁄8 60 27⁄8 73 213⁄16 73 35⁄16 84 11 4.8 – –
3 80 23⁄16 56 21⁄16 52 23⁄8 60 33⁄16 81 3 76 35⁄16 84 12 5.3 – –
21⁄2 65
31⁄2 90 27⁄16 62 23⁄8 60 27⁄16 62 37⁄16 87 35⁄16 84 37⁄16 87 13 5.7 – –
4 100 211⁄16 68 25⁄8 67 21⁄2 64 311⁄16 94 311⁄16 94 31⁄2 89 15 6.9 – –
11⁄2 40 13⁄8 35 13⁄8 35 27⁄16 62 23⁄8 60 25⁄16 59 31⁄16 78 8.3 3.8 – –
2 50 15⁄8 41 19⁄16 40 27⁄16 62 25⁄8 67 29⁄16 65 33⁄16 81 8.7 3.9 – –
21⁄2 65 115⁄16 49 17⁄8 48 23⁄8 60 27⁄8 73 213⁄16 73 35⁄16 84 10.0 4.5 – –
3 80 3 80 23⁄16 56 21⁄8 54 23⁄8 60 33⁄16 81 31⁄8 79 33⁄8 86 11 5.1 – –
31⁄2 90 31⁄2 90 27⁄16 62 23⁄8 60 27⁄16 62 37⁄16 87 37⁄16 87 37⁄16 87 14 6.3 – –
4 100 211⁄16 68 211⁄16 68 21⁄2 64 311⁄16 94 311⁄16 94 31⁄2 89 15 6.9 – –
5 125 35⁄16 84 35⁄16 84 29⁄16 65 45⁄16 110 45⁄16 110 33⁄4 95 20 9 – –
11 11
1 25 ⁄16 17 ⁄16 17 23⁄8 60 21⁄8 54 21⁄8 54 215⁄16 75 8.0 3.6 – –
11⁄4 32 11⁄4 32 11⁄4 32 23⁄8 60 21⁄4 57 21⁄4 57 3 76 8.6 3.9 – –
11⁄2 40 13⁄8 35 13⁄8 35 27⁄16 62 23⁄8 60 23⁄8 60 31⁄16 78 8.9 4.0 – –
2 50 15⁄8 41 15⁄8 41 27⁄16 62 25⁄8 67 25⁄8 67 33⁄16 81 9.9 4.5 – –
31⁄2 90
21⁄2 65 115⁄16 49 115⁄16 49 23⁄8 60 27⁄8 73 27⁄8 73 35⁄16 84 11 5.0 – –
3 80 23⁄16 56 23⁄16 56 23⁄8 60 33⁄16 81 33⁄16 81 33⁄8 86 12 5.4 – –
4 100 211⁄16 68 211⁄16 68 21⁄2 64 311⁄16 94 311⁄16 94 31⁄2 89 14 6.5 – –
5 125 35⁄16 84 35⁄16 84 29⁄16 65 45⁄16 110 45⁄16 110 33⁄4 95 20 8.9 – –
PF – 82

Wt.
Size A B C D E F
black galv.
3 3 3 3 1 3
⁄4 20 4 100 2 ⁄4 70 3 76 2 ⁄4 70 3 ⁄4 95 3 ⁄2 89 3 ⁄4 95 13 6.0 – –
1 25 4 100 23⁄4 70 215⁄16 75 23⁄4 70 33⁄4 95 31⁄2 89 33⁄4 95 14 6.1 – –
11⁄4 32 4 100 23⁄4 70 27⁄8 73 23⁄4 70 33⁄4 95 31⁄2 89 33⁄4 95 14 6.5 – –
11⁄2 40 4 100 23⁄4 70 27⁄8 73 23⁄4 70 33⁄4 95 31⁄2 89 33⁄4 95 13 6.1 – –
2 50 111⁄16 43 17⁄8 48 23⁄4 70 211⁄16 68 29⁄16 65 31⁄2 89 11 5.1 – –
21⁄2 65 17⁄8 48 17⁄8 48 25⁄8 67 215⁄16 75 213⁄16 73 39⁄16 90 12 5.3 – –
2 50
3 80 21⁄4 57 27⁄16 62 211⁄16 68 31⁄4 83 31⁄8 79 35⁄8 92 13 6.1 – –
4 100 23⁄4 70 23⁄4 70 23⁄4 70 33⁄4 95 31⁄2 89 33⁄4 95 13 6.0 – –
21⁄2 65 17⁄8 48 113⁄16 47 25⁄8 67 215⁄16 75 213⁄16 73 39⁄16 90 12 5.3 – –
3 80 21⁄4 57 21⁄8 54 211⁄16 68 31⁄4 83 31⁄8 79 35⁄8 92 13 5.9 – –
21⁄2 65
4 100 23⁄4 70 23⁄4 70 23⁄4 70 33⁄4 95 35⁄8 92 33⁄4 95 16 7.1 – –
5 125 33⁄8 86 31⁄2 89 213⁄16 73 43⁄8 111 43⁄8 111 4 102 22 10 – –
11⁄4 32 15
⁄16 24 15
⁄16 24 25⁄8 67 25⁄16 59 21⁄4 57 35⁄16 84 9.7 4.4 – –
11⁄2 40 17⁄16 37 17⁄16 37 211⁄16 68 27⁄16 62 23⁄8 60 35⁄16 84 10 4.6 – –
2 50 111⁄16 43 19⁄16 40 23⁄4 70 211⁄16 68 29⁄16 65 31⁄2 89 10 4.6 11 4.8
3 80
21⁄2 65 17⁄8 48 17⁄8 48 25⁄8 67 215⁄16 75 213⁄16 73 39⁄16 90 11 5.1 – –
3 80 21⁄4 57 21⁄8 54 211⁄16 68 31⁄4 83 31⁄8 79 35⁄8 92 13 5.7 – –
4 100
4 100 23⁄4 70 211⁄16 68 23⁄4 70 33⁄4 95 35⁄8 92 33⁄4 95 15 6.8 – –
11⁄2 40 17⁄16 37 13⁄8 35 211⁄16 68 27⁄16 62 23⁄8 60 35⁄16 84 10 4.6 – –
11
2 50 ⁄16 17 15⁄8 41 23⁄4 70 211⁄16 68 25⁄8 67 31⁄2 89 11 4.9 – –
21⁄2 65 2 51 115⁄16 49 25⁄8 67 3 76 27⁄8 73 39⁄16 90 12 5.4 – –
31⁄2 90 3 80 21⁄4 57 23⁄16 56 211⁄16 68 31⁄4 83 31⁄4 83 35⁄8 92 15 6.6 – –
31⁄2 90 21⁄2 64 27⁄16 62 211⁄16 68 31⁄2 89 37⁄16 87 311⁄16 94 14 6.5 – –
4 100 23⁄4 70 211⁄16 68 23⁄4 70 33⁄4 95 33⁄4 95 33⁄4 95 17 7.8 – –
5 125 33⁄8 86 35⁄16 84 213⁄16 73 43⁄8 111 43⁄8 111 4 102 21 9 – –
3
⁄4 20 11⁄4 32 11⁄4 32 213⁄16 73 25⁄16 59 25⁄16 59 35⁄16 84 11 4.8 – –
13 13
1 25 ⁄16 22 ⁄16 22 23⁄4 70 25⁄16 59 25⁄16 59 35⁄16 84 10 4.7 11 4.9
11⁄4 32 15
⁄16 24 15
⁄16 24 25⁄8 67 25⁄16 59 25⁄16 59 35⁄16 84 10 4.7 11 4.8
11⁄2 40 17⁄16 37 17⁄16 37 211⁄16 68 27⁄16 62 27⁄16 62 35⁄16 84 11 4.9 11 5.1
4 100 2 50 111⁄16 43 111⁄16 43 23⁄4 70 211⁄16 68 211⁄16 68 31⁄2 89 12 5.3 12 5.3
21⁄2 65 2 51 2 51 25⁄8 67 215⁄16 75 215⁄16 75 39⁄16 90 13 5.8 13 5.9
3 80 21⁄4 57 21⁄4 57 211⁄16 68 31⁄4 83 31⁄4 83 35⁄8 92 14 6.4 15 6.7
5 125 33⁄8 86 33⁄8 86 213⁄16 73 43⁄8 111 43⁄8 111 4 102 21 9 – –
6 150 37⁄8 98 37⁄8 98 27⁄8 73 415⁄16 125 415⁄16 125 41⁄16 103 26 12 – –
2 50 5 125 35⁄16 84 39⁄16 90 35⁄16 84 41⁄2 114 41⁄4 108 41⁄2 114 22 10 – –
21⁄2 65 5 125 35⁄16 84 33⁄8 86 35⁄16 84 41⁄2 114 41⁄4 108 41⁄2 114 22 10 – –
4 100 23⁄16 56 23⁄16 56 33⁄8 86 4 102 33⁄4 95 43⁄8 111 24 11 – –
3 80
6 150 313⁄16 97 41⁄16 103 33⁄8 86 5 127 5 127 45⁄8 117 31 14 – –
3 80 25⁄16 59 21⁄2 64 31⁄4 83 31⁄2 89 31⁄2 89 41⁄4 108 23 11 – –
31⁄2 90 4 100 213⁄16 71 211⁄16 68 33⁄8 86 4 102 33⁄4 95 43⁄8 111 23 10 – –
6 150 313⁄16 97 4 102 33⁄8 86 5 127 5 127 45⁄8 117 29 13 – –
21⁄2 65 21⁄16 52 2 51 33⁄16 81 33⁄16 81 33⁄16 81 41⁄4 108 22 10 – –
3 80 25⁄16 59 27⁄16 62 31⁄4 83 31⁄2 89 31⁄2 89 41⁄4 108 24 11 – –
5 125 4 100 4 100 213⁄16 71 23⁄4 70 33⁄8 86 4 102 33⁄4 95 43⁄8 111 21 9 – –
5 125 35⁄16 84 33⁄8 86 35⁄16 84 41⁄2 114 43⁄8 111 41⁄2 114 26 12 – –
6 150 313⁄16 97 37⁄8 98 33⁄8 86 5 127 5 127 45⁄8 117 34 15 – –
11⁄2 40 19⁄16 40 19⁄16 40 35⁄16 84 211⁄16 68 211⁄16 68 4 102 16 7.4 – –
2 50 13⁄4 44 13⁄4 44 37⁄16 87 215⁄16 75 215⁄16 75 41⁄8 105 17 7.9 – –
21⁄2 65 21⁄16 52 21⁄16 52 33⁄8 86 33⁄16 81 33⁄16 81 41⁄4 108 19 8.5 – –
5 125 3 80 25⁄16 59 25⁄16 59 31⁄4 83 31⁄2 89 31⁄2 89 41⁄4 108 20 9.1 – –
4 100 213⁄16 71 213⁄16 71 33⁄8 86 4 102 4 102 43⁄8 111 24 11 – –
6 150 313⁄16 97 313⁄16 97 33⁄8 86 5 127 5 127 45⁄8 117 33 15 – –
8 200 53⁄16 132 53⁄16 132 43⁄16 106 63⁄8 162 63⁄8 162 59⁄16 141 68 31 – –
PF – 83

Wt.
Size A B C D E F
black galv.
1 7 1 7 1 11 1
1 ⁄2 40 6 150 3 ⁄8 98 4 ⁄16 103 3 ⁄8 98 5 ⁄8 130 4 ⁄16 119 5 ⁄8 130 35 16 – –
2 50 6 150 37⁄8 98 4 102 37⁄8 98 51⁄8 130 411⁄16 119 51⁄8 130 35 16 – –
21⁄2 65 6 150 37⁄8 98 313⁄16 97 37⁄8 98 51⁄8 130 411⁄16 119 51⁄8 130 35 16 – –
3 80 4 100 213⁄16 71 3 76 37⁄8 98 41⁄16 103 4 102 415⁄16 125 32 15 – –
31⁄2 90 6 150 37⁄8 98 37⁄8 98 37⁄8 98 51⁄8 130 415⁄16 125 51⁄8 130 35 16 – –
3 80 25⁄16 59 21⁄2 64 37⁄8 98 39⁄16 90 39⁄16 90 413⁄16 122 32 14 – –
4 100 4 100 27⁄8 73 215⁄16 75 37⁄8 98 41⁄16 103 4 102 415⁄16 125 30 14 – –
6 150 37⁄8 98 37⁄8 98 37⁄8 98 51⁄8 130 415⁄16 125 51⁄8 130 34 16 – –
11⁄2 40 15⁄8 41 19⁄16 40 37⁄8 98 23⁄4 70 23⁄4 70 41⁄2 114 26 12 – –
6 150 31⁄2 90 25⁄8 67 29⁄16 65 313⁄16 97 37⁄8 98 33⁄4 95 47⁄8 124 30 14 – –
5 125
6 150 37⁄8 98 315⁄16 100 37⁄8 98 51⁄8 130 51⁄8 130 51⁄8 130 43 20 – –
8 200 51⁄8 130 53⁄16 132 43⁄16 106 63⁄8 162 63⁄8 162 59⁄16 141 66 30 – –
11⁄4 32 13⁄8 35 13⁄8 35 313⁄16 97 25⁄8 67 25⁄8 67 47⁄16 113 22 10 – –
2 50 113⁄16 46 113⁄16 46 37⁄8 98 3 76 3 76 45⁄8 117 25 11 – –
21⁄2 65 2 51 2 51 313⁄16 97 31⁄4 83 31⁄4 83 43⁄4 121 26 12 27 12
6 150 3 80 23⁄8 60 23⁄8 60 313⁄16 97 39⁄16 90 39⁄16 90 413⁄16 122 27 12 29 13
4 100 27⁄8 73 27⁄8 73 37⁄8 98 41⁄16 103 41⁄16 103 415⁄16 125 32 15 34 15
5 125 33⁄8 86 33⁄8 86 313⁄16 97 45⁄8 117 45⁄8 117 5 127 37 17 – –
8 200 51⁄8 130 51⁄8 130 43⁄16 106 63⁄8 162 63⁄8 162 59⁄16 141 58 26 – –
2 50 8 200 53⁄16 132 57⁄8 149 53⁄16 132 69⁄16 167 69⁄16 167 69⁄16 167 64 29 – –
4 100 8 200 53⁄16 132 51⁄2 140 53⁄16 132 69⁄16 167 69⁄16 167 69⁄16 167 67 30 – –
5 125 5 125 43⁄16 106 43⁄8 111 53⁄16 132 59⁄16 141 59⁄16 141 63⁄8 162 78 35 – –
5 125 43⁄16 106 45⁄16 110 53⁄16 132 59⁄16 141 59⁄16 141 63⁄8 162 77 35 – –
6 150 6 150 43⁄16 106 45⁄16 110 51⁄8 130 59⁄16 141 59⁄16 141 63⁄8 162 74 33 – –
8 200 53⁄16 132 51⁄8 130 53⁄16 132 69⁄16 167 69⁄16 167 69⁄16 167 92 42 – –
8 200 2 50 21⁄16 52 21⁄16 52 51⁄8 130 37⁄16 87 37⁄16 87 57⁄8 149 44 20 – –
21⁄2 65 25⁄16 59 25⁄16 59 51⁄16 129 311⁄16 94 311⁄16 94 6 152 45 21 – –
3 80 31⁄8 79 31⁄8 79 51⁄8 130 41⁄2 114 41⁄2 114 61⁄8 156 55 25 – –
8 200 31⁄2 90 31⁄8 79 31⁄8 79 51⁄8 130 41⁄2 114 41⁄2 114 61⁄8 156 54 25 – –
4 100 31⁄8 79 31⁄8 79 51⁄8 130 41⁄2 114 41⁄2 114 61⁄8 156 54 24 – –
5 125 43⁄16 106 43⁄16 106 53⁄16 132 59⁄16 141 59⁄16 141 63⁄8 162 68 31 – –
6 150 43⁄16 106 43⁄16 106 51⁄8 130 59⁄16 141 59⁄16 141 63⁄8 162 66 30 – –
See additional sizes on previous page. Note: See page PF-75 for pressure-temperature ratings.
Weight
Straight Cross Size A B
black
Figure 360
NPS Dn in mm in mm lbs kg
1 13 9
⁄2 15 ⁄16 22 ⁄16 14 2.8 1.3
3 5 13
⁄4 20 1 ⁄16 33 ⁄16 22 1.0 0.47
1 15
1 25 1 ⁄2 38 ⁄16 24 1.6 0.72
1 3 1
1 ⁄4 32 1 ⁄4 44 1 ⁄8 29 2.4 1.1
1 15 5
1 ⁄2 40 1 ⁄16 49 1 ⁄16 33 3.2 1.5
1 9
2 50 2 ⁄4 57 1 ⁄16 40 5.1 2.3
1 11 13
B 2 ⁄2 65 2 ⁄16 68 1 ⁄16 47 8.1 3.7
A
1 3
3 80 3 ⁄8 79 2 ⁄16 56 12 5.4
A
B 13 3
4 100 3 ⁄16 98 2 ⁄4 70 20 8.9
A A 5 125 1
4 ⁄2 114 5
3 ⁄16 84 31 14
B B
1 7
6 150 5 ⁄8 130 3 ⁄8 98 48 22
PF – 84
Reducing Cross
Figure 361
E F 50 DN
2 NPS
H 3 NPS 21⁄2 NPS 80 DN 65 DN

D
11⁄4 NPS 32 DN
A B C G
Read as: Read as:
3 x 2 1 ⁄2 x 2 x 1 1 ⁄4 80 x 65 x 50 x 32
Size A B C D E, F G, H Weight
NPS DN NPS DN NPS DN NPS DN in mm in mm in mm in mm in mm in mm lbs kg
3 3 13 13 15 15
1 25 1 25 ⁄4 20 ⁄4 20 ⁄ 16 22 ⁄ 16 22 ⁄ 16 24 ⁄ 16 24 13⁄ 8 35 17⁄ 16 37 1.3 0.59
1 1 15 15 1 1
1 ⁄4 32 1 ⁄4 32 1 25 1 25 ⁄ 16 24 ⁄ 16 24 1 ⁄8 29 1 ⁄8 29 19⁄ 16 40 111⁄ 16 43 2.0 0.9
1 25 1 25 1 25 1 25 11⁄ 8 29 11⁄ 4 32 11⁄ 4 32 15⁄ 8 41 113⁄ 16 47 2.7 1.2
11⁄ 4 32 1 25 1 25 1 25 1 25 11⁄ 4 32 11⁄ 4 32 15⁄ 8 41 113⁄ 16 47 2.7 1.2
11⁄ 2 40 1 25 1 25 1 25 1 25 11⁄ 4 32 11⁄ 4 32 15⁄ 8 41 113⁄ 16 47 2.5 1.1
11⁄ 2 40 1 25 11⁄ 8 29 11⁄ 8 29 13
⁄ 16 22 15
⁄ 16 24 113⁄ 16 47 17⁄ 8 48 3.9 1.8
11⁄ 4 32
11⁄ 4 32 11⁄ 8 29 11⁄ 8 29 13⁄ 8 35 13⁄ 8 35 113⁄ 16 47 17⁄ 8 48 4.0 1.8
11
1 25 1 25 ⁄ 16 17 11⁄ 8 29 17⁄ 16 37 17⁄ 16 37 13⁄ 4 44 2 51 3.6 1.6
11⁄ 2 40 11⁄ 4 32 1 25 11⁄ 8 29 13
⁄ 16 22 11⁄ 2 38 17⁄ 16 37 17⁄ 8 48 21⁄ 8 54 4.3 1.9
11⁄ 4 32 11⁄ 4 32 13
⁄ 16 22 13
⁄ 16 22 11⁄ 2 38 11⁄ 2 38 17⁄ 8 48 21⁄ 16 52 4.2 1.9
2 50 11 11
1 25 1 25 ⁄ 16 17 ⁄ 16 17 17⁄ 16 37 17⁄ 16 37 13⁄ 4 44 2 51 3.2 1.5
2 50 11⁄ 4 32 11⁄ 4 32 11⁄ 8 29 11⁄ 8 29 17⁄ 16 37 17⁄ 16 37 17⁄ 8 48 21⁄ 8 54 4.0 1.8
11⁄ 2 40 11⁄ 2 40 11⁄ 4 32 11⁄ 4 32 17⁄ 16 37 17⁄ 16 37 2 51 21⁄ 8 54 4.1 1.9
1 11⁄ 4 32 11⁄ 4 32 11⁄ 8 29 13
⁄ 16 22 113⁄ 16 47 113⁄ 16 47 21⁄ 16 52 23⁄ 8 60 6.0 2.7
1 ⁄ 2 40
11⁄ 2 40 1 25 15
⁄ 16 24 19⁄ 16 40 17⁄ 8 48 113⁄ 16 47 23⁄ 16 56 27⁄ 16 62 6.5 3.0
11
1 25 1 25 1 25 ⁄ 16 17 113⁄ 16 47 113⁄ 16 47 115⁄ 16 49 25⁄ 16 59 5.1 2.3
1 1 25 11⁄ 8 29 13
⁄ 16 22 113⁄ 16 47 113⁄ 16 47 21⁄ 16 52 23⁄ 8 60 5.9 2.7
1 ⁄4 32
2 50 11⁄ 4 32 11⁄ 8 29 13
⁄ 16 22 113⁄ 16 47 113⁄ 16 47 21⁄ 16 52 23⁄ 8 60 5.9 2.7
11⁄ 2 40 11⁄ 2 40 11⁄ 4 32 15
⁄ 16 24 17⁄ 8 48 17⁄ 8 48 23⁄ 16 56 27⁄ 16 62 6.1 2.8
21⁄ 2 65 2 50 2 50 11⁄ 2 38 13⁄ 4 44 17⁄ 8 48 17⁄ 8 48 27⁄ 16 62 29⁄ 16 65 7.2 3.3
1 25 1 25 1 25 1 25 113⁄ 16 47 113⁄ 16 47 115⁄ 16 49 25⁄ 16 59 5.1 2.3
13 13
1 1 25 ⁄ 16 22 ⁄ 16 22 13⁄ 4 44 113⁄ 16 47 21⁄ 16 52 23⁄ 8 60 5.4 2.4
1 ⁄4 32
1 11⁄ 4 32 11⁄ 8 29 11⁄ 8 29 113⁄ 16 47 113⁄ 16 47 21⁄ 16 52 23⁄ 8 60 5.3 2.4
2 ⁄2 65
1 11⁄ 4 32 11⁄ 4 32 11⁄ 4 32 113⁄ 16 47 113⁄ 16 47 23⁄ 16 56 27⁄ 16 62 5.6 2.5
1 ⁄2 40
11⁄ 2 40 11⁄ 4 32 11⁄ 4 32 17⁄ 8 48 17⁄ 8 48 23⁄ 16 56 27⁄ 16 62 5.7 2.6
2 50 2 50 19⁄ 16 40 19⁄ 16 40 115⁄ 16 49 115⁄ 16 49 27⁄ 16 62 29⁄ 16 65 6.8 3.1
11
1 25 1 25 ⁄ 16 17 11⁄ 8 29 21⁄ 8 54 21⁄ 8 54 21⁄ 16 52 211⁄ 16 68 7.5 3.4
21⁄ 2 65 11⁄ 2 40 11⁄ 2 40 13⁄ 8 35 17⁄ 16 37 23⁄ 16 56 23⁄ 16 56 25⁄ 16 59 213⁄ 16 73 8.4 3.8
2 50 2 50 15⁄ 8 41 111⁄ 16 43 21⁄ 4 57 21⁄ 4 57 29⁄ 16 65 215⁄ 16 75 9.6 4.4
11 11
1 25 1 25 ⁄ 16 17 ⁄ 16 17 21⁄ 8 54 21⁄ 8 54 21⁄ 16 52 211⁄ 16 68 6.7 3.0
11⁄ 4 32 11⁄ 4 32 13
⁄ 16 22 13
⁄ 16 22 21⁄ 8 54 21⁄ 8 54 23⁄ 16 56 23⁄ 4 70 7.2 3.3
3 80
11⁄ 4 32 13⁄ 8 35 13⁄ 8 35 23⁄ 16 56 23⁄ 16 56 25⁄ 16 59 213⁄ 16 73 7.9 3.6
11⁄ 2 40
3 80 11⁄ 2 40 13⁄ 8 35 13⁄ 8 35 23⁄ 16 56 23⁄ 16 56 25⁄ 16 59 213⁄ 16 73 7.9 3.6
11⁄ 2 40 15⁄ 8 41 15⁄ 8 41 23⁄ 16 56 23⁄ 16 56 29⁄ 16 65 215⁄ 16 75 9.3 4.2
2 50
2 50 15⁄ 8 41 15⁄ 8 41 23⁄ 16 56 23⁄ 16 56 29⁄ 16 65 215⁄ 16 75 8.8 4.0
21⁄ 2 65 21⁄ 2 65 17⁄ 8 48 17⁄ 8 48 23⁄ 16 56 23⁄ 16 56 213⁄ 16 73 31⁄ 16 78 10.0 4.5
11⁄ 2 40 11⁄ 2 40 13⁄ 8 35 17⁄ 16 37 27⁄ 16 62 27⁄ 16 62 23⁄ 8 60 31⁄ 16 78 10 4.7
3 80
1 21⁄ 2 65 21⁄ 2 65 17⁄ 8 48 115⁄ 16 49 27⁄ 16 62 27⁄ 8 73 27⁄ 8 73 35⁄ 16 84 13 5.9
3 ⁄ 2 90
1 11⁄ 4 32 11⁄ 4 32 11⁄ 4 32 11⁄ 4 32 23⁄ 8 60 23⁄ 8 60 21⁄ 4 57 3 76 9.1 4.1
3 ⁄ 2 90
11⁄ 2 40 11⁄ 4 32 13⁄ 8 35 13⁄ 8 35 27⁄ 16 62 27⁄ 16 62 23⁄ 8 60 31⁄ 16 78 9.8 4.4
3 80 11⁄ 2 40 11⁄ 2 40 13⁄ 8 35 17⁄ 16 37 211⁄ 16 68 25⁄ 8 67 27⁄ 16 62 35⁄ 16 84 14 6.1
3 80 2 50 2 50 15⁄ 8 41 111⁄ 16 43 213⁄ 16 73 213⁄ 16 73 211⁄ 16 68 31⁄ 2 89 14 6.1
31⁄ 2 90 11⁄ 4 32 11⁄ 4 32 11⁄ 4 32 15
⁄ 16 24 211⁄ 16 68 211⁄ 16 68 25⁄ 16 59 35⁄ 16 84 11 5.2
1 25 1 25 11⁄ 4 32 11⁄ 4 32 23⁄ 4 70 23⁄ 4 70 25⁄ 16 59 35⁄ 16 84 11 5.0
11⁄ 4 32 11⁄ 4 32 11⁄ 4 32 11⁄ 4 32 211⁄ 16 68 211⁄ 16 68 25⁄ 16 59 35⁄ 16 84 11 4.9
11⁄ 2 40 11⁄ 2 40 13⁄ 8 35 13⁄ 8 35 211⁄ 16 68 211⁄ 16 68 27⁄ 16 62 35⁄ 16 84 12 5.4
4 100
11⁄ 2 40 2 51 2 51 27⁄ 8 73 211⁄ 16 68 215⁄ 16 75 39⁄ 16 90 14 6.5
4 100 21⁄ 2 65 2 50 17⁄ 8 48 17⁄ 8 48 211⁄ 16 68 27⁄ 8 73 215⁄ 16 75 39⁄ 16 90 15 6.7
21⁄ 2 65 2 51 2 51 211⁄ 16 68 211⁄ 16 68 215⁄ 16 75 39⁄ 16 90 14 6.4
3 80 3 80 23⁄ 16 56 23⁄ 16 56 211⁄ 16 68 211⁄ 16 68 31⁄ 4 83 35⁄ 8 92 16 7.0
31⁄ 2 90 31⁄ 2 90 211⁄ 16 68 211⁄ 16 68 23⁄ 4 70 23⁄ 4 70 33⁄ 4 95 33⁄ 4 95 21 10
4 100 2 50 111⁄ 16 43 111⁄ 16 43 211⁄ 16 68 211⁄ 16 68 23⁄ 4 70 37⁄ 16 87 12 5.4
Note: See page PF-75 for pressure-temperature ratings. See additional sizes on following page.
PF – 85
Reducing Cross
Figure 361
E F 50 DN
2 NPS
H 3 NPS 21⁄2 NPS 80 DN 65 DN

D
11⁄4 NPS 32 DN
A B C G
Read as: Read as:
3 x 2 1 ⁄2 x 2 x 1 1 ⁄4 80 x 65 x 50 x 32
Size A B C D E, F G, H Weight
NPS DN NPS DN NPS DN NPS DN in mm in mm in mm in mm in mm in mm lbs kg
1 1 1 5 3 3
1 ⁄2 40 1 ⁄2 40 1 ⁄2 38 1 ⁄8 41 3 ⁄8 86 3 ⁄8 86 211⁄ 16 68 4 102 19 8.5
4 100
21⁄ 2 65 2 50 2 51 21⁄ 8 54 35⁄ 16 84 39⁄ 16 90 33⁄ 16 81 41⁄ 4 108 22 10
5 125
3 3 7 7 15 1
2 50 2 50 1 ⁄4 44 1 ⁄4 44 3 ⁄ 16 87 3 ⁄ 16 87 2 ⁄ 16 75 4 ⁄8 105 18 8.3
5 125
3 80 3 80 25⁄ 16 59 25⁄ 16 59 35⁄ 16 84 35⁄ 16 84 31⁄ 2 89 45⁄ 16 110 23 10
11⁄ 2 40 11⁄ 2 40 11⁄ 2 38 19⁄ 16 40 37⁄ 8 98 37⁄ 8 98 23⁄ 4 70 41⁄ 2 114 26 12

3 13 15 15 5
5 125 2 50 2 50 1 ⁄4 44 1 ⁄ 16 47 3 ⁄ 16 100 3 ⁄ 16 100 3 76 4 ⁄8 117 28 13
3 80 3 80 25⁄ 16 59 23⁄ 8 60 37⁄ 8 98 37⁄ 8 98 39⁄ 16 90 413⁄ 16 124 33 15
6 150 11⁄ 4 32 11⁄ 4 32 13⁄ 8 35 13⁄ 8 35 313⁄ 16 98 313⁄ 16 98 25⁄ 8 67 47⁄ 16 113 23 10
1 1 7 7 1 3
6 150 2 ⁄2 65 2 ⁄2 65 2 51 2 51 3 ⁄8 98 3 ⁄8 98 3 ⁄4 83 4 ⁄4 121 26 12
4 100 4 100 213⁄ 16 73 213⁄ 16 73 37⁄ 8 98 37⁄ 8 98 41⁄ 16 103 415⁄ 16 125 33 15
5 125 5 125 33⁄ 8 86 33⁄ 8 86 313⁄ 16 98 313⁄ 16 98 45⁄ 8 117 5 127 39 18

1 1 1 1 1 1
4 100 4 100 3 ⁄8 79 3 ⁄8 79 5 ⁄ 16 129 5 ⁄ 16 129 4 ⁄2 114 6 ⁄8 156 56 25
8 200 8 200
5 125 5 125 43⁄ 16 106 43⁄ 16 106 53⁄ 16 132 53⁄ 16 132 59⁄ 16 141 63⁄ 8 162 80 36
Note: See page PF-75 for pressure-temperature ratings. See additional sizes on previous page.
Lateral Size) A B C D Weight black

Figure 373 NPS DN in mm in mm in mm in mm lbs kg
3 1 3 3 1
⁄4 20 ⁄4 6 1 ⁄4 44 ⁄4 19 2 ⁄4 57 1.00 0.45
3
1 25 ⁄16 5 23⁄16 56 3
⁄4 19 23⁄4 70 1.6 0.73
11⁄4 32 3
⁄8 10 25⁄8 67 1 25 31⁄4 83 2.6 1.2
11⁄2 40 7
⁄16 11 33⁄16 81 11⁄16 27 313⁄16 98 3.6 1.6
9
2 50 ⁄16 14 313⁄16 98 11⁄4 32 41⁄2 114 5.8 2.6
DB 21⁄2 65 5
⁄8 16 45⁄16 110 11⁄2 38 53⁄16 132 9.0 4.1
B
13
D 3 80 ⁄16 22 53⁄16 132 13⁄4 44 61⁄8 156 14 6.1
C
A 4 100 11⁄16 27 69⁄16 167 21⁄8 54 75⁄8 194 21 10
PF – 86
Return Bends Center Weight Return Bends Center Weight

Size Size
Close Pattern, R.H. to Center black Open to Center black
Figure 375 NPS DN in mm lbs kg Figure 376 NPS DN in mm lbs kg
1 1
1
⁄2 15 11⁄4 32 0.65 0.29 ⁄2 15 1 ⁄2 38 — —
3
3
⁄4 20 1
1 ⁄2 38 1.1 0.50 ⁄4 20 17⁄8 48 0.98 0.44
1 25 13⁄4 44 1.7 0.78 1 25 21⁄2 64 1.5 0.67
1
1
1 ⁄4 32 1
2 ⁄4 57 2.4 1.1 1 ⁄4 32 3 76 2.4 1.1
1 1
1 ⁄2 40 2 ⁄2 64 3.5 1.6 1
1 ⁄2 40 1
3 ⁄2 89 3.3 1.5
Center to Weight
Size
Special Wide Pattern Figure 377 Center black galv.
1 25 4 102 2.2 1.0 • •
11⁄4 32 4 102 3.5 1.6 • •
11⁄4 32 6 152 3.7 1.7 • •
Note: See page PF-75 for pressure-

•Not stocked
temperature ratings.
Across Flats Weight

Hex Coupling Size B C
A black
Figure 366
A
1 25 115⁄16 49 111⁄16 43 9
⁄16 14 0.82 0.37
C
B
Weight
Flange Union Size Diam. of Flanges No. of
Gasket Type black galv
bolts
Figure 487
Assembled with gaskets 1
⁄2 15 15
2 ⁄16 75 3 1.8 0.79 1.8 0.82
3
⁄4 20 3 76 3 2.0 0.91 2.0 0.9
1
1 25 3 ⁄4 83 3 2.3 1.0 2.3 1.0
11⁄4 32 43⁄16 106 4 4.8 2.2 4.8 2.2
11⁄2 40 43⁄8 111 4 5.0 2.3 5.1 2.3
2 50 5 127 4 6.5 2.9 6.7 3.0
1 5
2 ⁄2 65 5 ⁄8 143 4 8.5 3.9 8.7 3.9
3
3 80 6 ⁄8 162 4 11 5.0 11 5.1
31⁄2 90 67⁄8 175 4 13 5.8 13 5.9
4 100 711⁄16 195 5 18 8.2 19 8.4
15
5 125 8 ⁄16 227 5 22 10 23 10
1
6 150 10 ⁄4 260 6 30 14 31 14
8 200 1215⁄16 329 8 51 23 53 24
PF – 87
Concentric Reducers Eccentric Reducer

Figure 367 Figure 368
B B
A A
Weight Weight
Size A B Size A B*
black black galv.
NPS DN NPS DN in mm in mm lbs kg NPS Dn NPS Dn in mm in mm lbs kg lbs kg
3 1 9 1
3
⁄4 20 1
⁄2 15 5
⁄8 16 9
1 ⁄16 40 0.40 0.18 ⁄4 20 ⁄2 15 ⁄16 14 1 ⁄2 38 0.45 0.20 — —
1 1
1
■ 15 11 11 ⁄2 15 ⁄2 13 17⁄16 37 0.57 0.26 • •
■ ⁄2 ⁄16 17 1 ⁄16 43 0.54 0.24 1 25 3 7
1 25 ⁄4 20 ⁄16 11 11⁄2 38 0.61 0.28 — —
■ 3⁄4 ■ 20 7
⁄16 11 11⁄2 38 0.63 0.29 1 9
⁄2 15 ⁄16 14 15⁄8 41 1.00 0.45 — —
1 3 1
1
⁄2 15 9
⁄16 14 5
1 ⁄8 41 0.84 0.38 1 ⁄4 32 ⁄4 20 ⁄2 13 15⁄8 41 0.90 0.41 — —
1
1
32 3
20 1 25 1
54 1.1 0.49
25 ⁄2 13 111⁄16 43 1.00 0.45 • •
1 ⁄4 ⁄4 2 ⁄8
1 11
⁄2 15 ⁄16 17 13⁄4 44 1.1 0.50 — —
15
1 25 ⁄16 24 21⁄8 54 1.1 0.49 3
⁄4 20 9
⁄16 14 111⁄16 43 1.2 0.53 — —
11⁄2 40 9
1
⁄2 15 1
⁄2 13 5
1 ⁄8 41 1.00 0.45 1 25 ⁄16 14 13⁄4 44 1.2 0.55 — —
3
20 1
13 5
41 1.2 0.54 11⁄4 32 5
⁄8 16 17⁄8 48 1.3 0.57 • •
⁄4 ⁄2 1 ⁄8
1 3
11⁄2 40 ⁄2 15 ⁄4 19 115⁄16 49 1.8 0.82 — —
1
1 25 ⁄2 13 13⁄4 44 1.5 0.68 3
⁄4 20 3
⁄4 19 2 51 1.8 0.83 — —
11
1
1 ⁄4 32 1 25 1
2 ⁄4 57 1.5 0.66 2 50 1 25 ⁄16 17 21⁄16 52 1.9 0.84 — —
1
15 5
16 2 51 2.0 0.91 11⁄4 32 13
⁄16 22 21⁄8 54 1.9 0.85 — —
⁄2 ⁄8
11⁄2 40 7
⁄8 22 23⁄16 56 1.9 0.88 • •
3 3
⁄4 20 ⁄4 19 2 51 1.9 0.86 13
1 25 ⁄16 22 21⁄4 57 2.7 1.2 — —
2 50 1 25 3
⁄4 19 2 51 1.8 0.83 11⁄4 32 7
⁄8 22 23⁄8 60 2.8 1.3 — —
21⁄2 65 1 7
1
32 13
22 1
54 1.8 0.81 1 ⁄2 40 ⁄8 22 23⁄8 60 2.9 1.3 — —
1 ⁄4 ⁄16 2 ⁄8
2 50 1 25 29⁄16 65 3.0 1.3 • •
11⁄2 40 7
⁄8 22 23⁄16 56 2.0 0.90 1 25 7
⁄8 22 27⁄16 62 4.0 1.8 — —
11⁄2 40 3
⁄4 19 2 51 3.1 1.4 11⁄4 32 15
⁄16 24 29⁄16 65 3.8 1.7 — —
21⁄2 65 3 80 1
1 ⁄2 40 15
⁄16 24 29⁄16 65 4.2 1.9 — —
9
2 50 1 25 2 ⁄16 65 3.0 1.4
2 50 11⁄16 27 23⁄4 70 4.6 2.1 — —
3 15
⁄4 20 ⁄16 24 21⁄2 64 4.3 2.0
21⁄2 65 15
⁄16 24 213⁄16 73 4.8 2.2 • •
3 80 2 50 11⁄16 27 23⁄4 70 4.0 1.8 2 50 11⁄16 27 23⁄4 70 5.2 2.4 — —
31⁄2 90 15
3 80 ⁄16 24 215⁄16 75 6.0 2.7 • •
21⁄2 65 15
⁄16 24 213⁄16 73 4.4 2.0
1 25 11⁄16 27 211⁄16 68 6.8 3.1 — —
2 50 13⁄16 30 215⁄16 75 6.5 2.9
11⁄4 32 11⁄16 27 23⁄4 70 6.6 3.0 — —
4 100 21⁄2 65 13⁄16 30 31⁄8 79 7.8 3.5 11⁄2 40 11⁄8 29 213⁄16 73 6.6 3.0 — —
4 100
3 80 11⁄16 27 31⁄8 79 7.0 3.2 2 50 13⁄16 30 215⁄16 75 6.9 3.1 — —
21⁄2 65 11⁄8 29 31⁄16 78 7.3 3.3 — —
5 125 4 100 11⁄16 27 35⁄16 84 10 4.8
3 80 11⁄16 27 31⁄8 79 7.6 3.5 • •
4 100 11⁄8 29 37⁄16 87 14 6.3 21⁄2 65 11⁄8 29 33⁄16 81 11 5.2 — —
6 150
5 125 11⁄8 29 39⁄16 90 16 7.0 5 125 3 80 11⁄16 27 31⁄4 83 11 5.2 — —
4 100 11⁄16 27 35⁄16 84 11 5.1 • •
8 200 6 150 11⁄4 32 37⁄8 98 29 13
3 80 11⁄16 27 35⁄16 84 15 6.6 — —
■ hex end 6 150 4 100 11⁄8 29 37⁄16 87 15 7.0 • •
5 125 11⁄8 29 39⁄16 90 18 8.2 • •
5 3
5 125 1 ⁄16 3 ⁄4 33 95 28 13 — —
8 200
6 150 11⁄4 32 37⁄8 98 28 13 • •
* Dimension “B” does not conform to ASME standard
• Not stocked
PF – 88
Hex Bushing Hex Bushing

Weight Weight
Size Size
black galv. black galv.
NPS Dn Hex NPS Dn lbs kg lbs kg NPS Dn Hex NPS Dn lbs kg lbs kg
1
⁄4 8 1
⁄8 6 0.02* 0.01* 0.02 0.01 ■ 1
⁄2 15 1.9 0.88 2.0 0.9
1
⁄8 6 0.05 0.02 0.05 0.02 ■ 3
⁄4 20 1.9 0.87 2.0 0.88
3
⁄8 10 1 ■ 1 25 1.9 0.86 1.9 0.87
⁄4 8 0.04 0.02 0.04 0.02
1
⁄8 6 0.06 0.03 0.06 0.03 3 80 ■ 11⁄4 32 1.8 0.80 1.8 0.82
1
⁄2 15 1
⁄4 8 0.07 0.03 0.07 0.03 ■ 11⁄2 40 1.8 0.81 1.8 0.83
3
⁄8 10 0.05 0.02 0.05 0.02 2 50 1.9 0.86 1.9 0.88
1
⁄8 6 0.09 0.04 0.09 0.04 21⁄2 65 1.6 0.74 1.7 0.75
1
⁄4 8 0.10 0.05 0.11 0.05 ■ 1 25 2.6 1.2 2.8 1.2
3
⁄4 20 3 ■ 11⁄4 32 2.5 1.2 2.6 1.2
⁄8 10 0.12 0.05 0.12 0.05
1
⁄2 15 0.10 0.05 0.11 0.05 ■ 11⁄2 40 2.3 1.1 2.4 1.1
31⁄2 90
■ 1
⁄8 6 0.21 0.09 0.22 0.10 ■ 2 50 2.4 1.1 2.5 1.1
■ 1
⁄4 8 0.19 0.08 0.19 0.09 21⁄2 65 2.6 1.2 2.6 1.2
1 25 ■ 3
10 0.18 0.08 0.19 0.09 3 80 2.0 0.89 2.0 0.90
⁄8
1
15 0.21 0.10 0.22 0.10
■ 1 25 3.6 1.6 3.6 1.6
⁄2
3
20 0.17 0.08 0.17 0.08
■ 11⁄4 32 3.5 1.6 3.6 1.6
⁄4
■ 1
8 0.29 0.13 0.30 0.14
■ 11⁄2 40 3.4 1.6 3.5 1.6
⁄4
■ 3
10 0.29 0.13 0.29 0.13
4 100 ■ 2 50 3.1 1.4 3.2 1.5
⁄8
11⁄4 32 ■ 1
15 0.30 0.14 0.30 0.14
■ 21⁄2 65 3.3 1.5 3.3 1.5
⁄2
3 3 80 3.1 1.4 3.2 1.5
⁄4 20 0.39 0.17 0.39 0.18
31⁄2 90 2.5 1.1 2.6 1.2
1 25 0.30 0.13 0.30 0.14
1
8 0.47 0.21 0.49 0.22
■ 2 50 5.1 2.3 5.2 2.4
⁄4
■ 21⁄2 65 4.9 2.2 5.1 2.3
■ 3
⁄8 10 0.47 0.21 0.50 0.23
5 125 ■ 3 80 4.8 2.2 4.9 2.2
1 ■ 1
⁄2 15 0.42 0.19 0.47 0.21
1 ⁄2 40 31⁄2 90 4.0 1.8 4.3 2.0
■ 3
⁄4 20 0.47 0.21 0.50 0.23
4 100 3.9 1.8 4.1 1.9
1 25 0.50 0.23 0.52 0.24
■ 2 50 8.0 3.6 8.3 3.8
11⁄4 32 0.33 0.15 0.33 0.15
1
8 0.75 0.34 0.80 0.36
■ 21⁄2 65 7.7 3.5 7.8 3.5
⁄4
3 ■ 3 80 7.8 3.5 8.1 3.7
⁄8 10 0.75 0.34 0.78 0.35 6 150
■ 31⁄2 90 7.1 3.2 7.4 3.4
■ 1
⁄2 15 0.77 0.35 0.78 0.35
■ 4 100 6.8 3.1 7.1 3.2
2 50 ■ 3
⁄4 20 0.71 0.32 0.75 0.34
5 125 5.2 2.4 5.5 2.5
■ 1 25 0.73 0.33 0.76 0.34
■ 3 80 16 7.0 16 7.2
■ 11⁄4 32 0.81 0.37 0.83 0.38
■ 4 100 14 6.3 15 6.8
■ 11⁄2 40 0.67 0.30 0.68 0.31 8 200
■ 5 125 14 6.2 14 6.4
■ 1
⁄2 15 1.3 0.58 — —
6 150 13 6.0 14 6.1
■ 3
⁄4 20 1.3 0.57 1.3 0.59 ■ 4 100 28 12 — —
■ 1 25 1.2 0.53 1.2 0.56 ■ 5 125 — — — —
21⁄2 65 10 250
■ 11⁄4 32 1.2 0.56 1.3 0.57 ■ 6 150 25 11 — —
■ 11⁄2 40 1.3 0.59 1.3 0.61 8 200 22 10 — —
2 50 0.92 0.42 0.95 0.43 4 100 33 15 * *
Continued to next column 12 300
10 250 33 15 33 15
•Not stocked Note: Hexagon head or octagon head bushings 2 1⁄2 NPS (65 DN) and smaller reducing According to specifications, hex bushings and cored plugs should be used with
one size may be made of malleable iron, ductile iron or steel. Other sizes may be made of 150# malleable iron and 125# cast iron. Solid plugs and face bushings should be used
■ Inside hex cast iron, ductile iron, malleable iron or steel. Face bushings 2 1⁄2 NPS (65 DN) and with #250 and #300 fittings.
*P.O.A. smaller may be made of malleable iron, ductile iron or steel. Face bushings 3NPS (80 Note: See page PF-57 and page PF-75 for pressure-temperature ratings.
DN) and larger reducing one size may be made of malleable iron, ductile iron or steel. Pressure/temperature ratings vary with material
Face bushings 3NPS (80 DN) and larger reducing two sizes or more may be made of
cast or malleable iron, ductile iron, or steel.
PF – 89
Weight
Face Bushing Size
black galv.
Figure 385
NPS DN NPS DN lbs kg lbs kg
1 1
⁄4 8 ⁄8 6 0.01* 0.00* — —
3 1
⁄8 10 ⁄4 8 0.02* 0.01* — —
1
1
⁄4 8 0.04* 0.02* — —
⁄2 15 3
⁄8 10 0.03* 0.01* — —
3
3
⁄8 10 0.07* 0.03* 0.07 0.03
⁄4 20 1
⁄2 15 0.06 0.02 0.06 0.02
1
⁄2 15 0.12 0.05 0.13 0.06
1 25 3
⁄4 20 0.09 0.04 0.09 0.04
1
⁄2 15 0.25* 0.11* — —
11⁄4 32 3
⁄4 20 0.27* 0.12* — —
1 25 0.16 0.07 0.17 0.07
1
⁄2 15 0.32 0.15 0.33 0.15
3
⁄4 20 0.39* 0.18* 0.40 0.18
11⁄2 40
1 25 0.34 0.15 0.35 0.16
11⁄4 32 0.15 0.07 0.15 0.07
1
⁄2 15 0.69* 0.32* — —
1 25 0.53 0.24 0.54 0.24
2 50
11⁄4 32 0.54 0.24 0.55 0.25
11⁄2 40 0.34 0.16 0.35 0.16
11⁄4 32 0.94* 0.42* 0.96* 0.44*
21⁄2 65 11⁄2 40 0.85* 0.39* 0.87* 0.39*
2 50 0.62 0.28 0.62 0.28
11⁄4 32 1.5 0.70 • •
11⁄2 40 1.5 0.68 1.6 0.71
3 80
2 50 1.3 0.60 1.4 0.63
21⁄2 65 0.97 0.44 1.0 0.46
31⁄2 90 21⁄2 65 1.8 0.80 – –
* POA
Minimum Dimensions Weight

Locknut Size
A B C D black galv.
Figure 370
21⁄2 65 3.500 89 3.180 81 .590 15 .090 2 1.1 0.51 1.2 0.53
3 80 4.270 108 3.840 98 .670 17 .090 2 1.6 0.73 1.7 0.77
4 100 5.380 137 5.000 127 .800 20 .130 3 3.5 1.6 – –
Diameter of Diameter of Weight

Floor Flange Size
Flange No. of Holes
Bolt Holes Cored black galv.
Holes
Figure 1006
1 13 1
⁄4 8 2 ⁄16 73 4 ⁄4 6 0.39 0.18 0.40 0.18
3 1
⁄8 10 3 76 4 ⁄4 6 0.43 0.20 0.45 0.20
1 1 1
⁄2 15 3 ⁄2 89 4 ⁄4 6 0.73 0.33 0.74 0.34
3
⁄4 20 31⁄2 89 4 1
⁄4 6 0.80 0.36 0.81 0.37
1
1 25 4 102 4 ⁄4 6 1.1 0.51 1.1 0.52
11⁄4 32 4 102 4 1
⁄4 6 1.1 0.52 1.1 0.52
1 1 5
1 ⁄2 40 4 ⁄2 114 4 ⁄16 8 1.6 0.70 1.6 0.71
2 50 51⁄2 140 4 5
⁄16 8 2.4 1.1 2.4 1.1
Note:See page PF-57 and page PF-75 for pressure-temperature ratings.
PF – 90
Weight Weight
Square Head Size Countersunk Size
Plugs (Cored) black galv. Plugs black galv.
Figure 387◊ Figure 390▲
NPS DN lbs kg lbs kg NPS DN lbs kg lbs kg
3 1
⁄4 20 0.13 0.06 0.14 0.06 ⁄2 15 0.05 0.02 0.05 0.02
1 25 0.25 0.11 0.28 0.13 3
⁄4 20 0.09 0.04 0.10* 0.05*
11⁄4 32 0.39 0.18 0.41 0.18 1 25 0.20 0.09 0.20 0.09
1 1
1 ⁄2 40 0.50 0.23 0.52 0.23 1 ⁄4 32 0.32 0.15 0.34 0.15
2 50 0.81 0.37 0.83 0.38 1
1 ⁄2 40 0.47 0.21 0.48 0.22
21⁄2 65 1.3 0.60 1.3 0.61 2 50 0.84 0.38 1.3 0.59
3 80 1.9 0.85 1.9 0.87 21⁄2 65 1.4 0.64 2.0 0.91
31⁄2 90 2.5 1.1 2.6• 1.2• 3 80 2.3 1.0 3.0 1.4
4 100 4.0 1.8 4.0 1.8 31⁄2 90 3.0 1.4 — —
4 100 3.8 1.7 3.9 1.8
Weight Weight
Square Head Size Size
Cap
Plugs (Solid) black galv. black galv.
Figure 381
Figure 388
NPS DN lbs kg lbs kg NPS DN lbs kg lbs kg
1 1
⁄2 15 0.10 0.05 0.10 0.05 2 ⁄2 65 2.5 1.2 — —
3
⁄4 20 0.17 0.08 0.18 0.08 3 80 4.1 1.9 — —
1 25 0.32 0.15 0.33 0.15 4 100 6.4 2.9 — —
11⁄4 32 0.53 0.24 0.55 0.25 5 125 11 4.9 — —
11⁄2 40 0.76 0.34 0.77 0.35 6 150 14 6.4 15 6.6
2 50 1.2 0.56 1.3 0.57 8 200 27 12 28 13
1
2 ⁄2 65 2.0 0.91 2.1 0.9
3 80 3.2 1.4 3.3 1.5
31⁄2 90 4.4 2.0 • •
Weight
Bar Plugs Size
Cored black galv.
Figure 389
NPS DN lbs kg lbs kg
4 100 3.8 1.7 4.0 1.8
5 125 6.5 2.9 6.8 3.1
6 150 9.9 4.5 10 4.7
8 200 20 9 21 10
Weight
Size
black galv.
Bar Plugs NPS DN lbs kg lbs kg
Solid
Figure 380 4 100 5.7 2.6 • •
5 125 9.6 4.4 • •
6 150 15 6.7 • •
8 200 • • • •
◊ 1⁄ 8, 1⁄ 4, 3⁄ 8 NPS (6, 8 & 10 DN) plugs furnished in steel Note: See page PF-75 for pressure-temperature ratings.
1 3
s ⁄ 2 and ⁄ 4 NPS (15 & 20 DN) countersunk plugs furnished in * POA
malleable iron
• Not stocked
PF – 91
Class 250 (Extra Heavy)
Weight Weight
90° Elbow Size A B 45° Elbow Size A B
black black
NPS DN in mm in mm lbs kg NPS DN in mm in mm lbs kg
1 5 15
⁄4 8 ⁄8 16 ⁄16 24 0.37 0.17 1
⁄2 15 9
⁄16 14 1 25 0.66 0.30
3 11
⁄8 10 ⁄16 17 11⁄16 27 0.50 0.23 3
⁄4 20 5
⁄8 16 1
1 ⁄8 29 1.0 0.47
1 13
⁄2 15 ⁄16 22 11⁄4 32 0.75 0.34 1 25 3
⁄4 19 15⁄16 33 1.6 0.71
3 15
⁄4 20 ⁄16 24 17⁄16 37 1.1 0.51 1 7 1
1 ⁄4 32 ⁄8 22 1 ⁄2 38 2.7 1.2
1 25 11⁄16 27 15⁄8 41 1.8 0.81
11⁄2 40 11⁄16 27 111⁄16 43 3.5 1.6
11⁄4 32 15⁄16 33 115⁄16 49 3.0 1.4
5
2 50 1 ⁄16 33 2 51 6.1 2.8
B 11⁄2 40 11⁄2 38 21⁄8 54 4.0 1.8
1 5 1
2 ⁄2 65 1 ⁄16 33 2 ⁄4 57 9.8 4.4
B
A 2 50 113⁄16 47 21⁄2 64 6.8 3.1
A 9 1
21⁄2 65 2 51 215⁄16 75 11 4.8 A 3 80 1 ⁄16 40 2 ⁄2 64 14 6.3
B A 3 13
3 80 3
2 ⁄8 60 3
3 ⁄8 86 15 6.9 B 4 100 1 ⁄4 44 2 ⁄16 73 23 10
1
3 ⁄2 90 3
2 ⁄4 70 3
3 ⁄4 95 20 9 6 150 21⁄4 57 31⁄2 89 50 23
1 1
4 100 3 ⁄16 78 4 ⁄8 105 26 12
8 200 55⁄8 143 7 178 122 55
Weight
Straight Tee Size A B
black
Figure 425
NPS Dn in mm in mm lbs kg
1 5 15
⁄4 8 ⁄8 16 ⁄16 24 0.47 0.21
3 11 1
⁄8 10 ⁄16 17 1 ⁄16 27 0.70 0.32
1 3
⁄2 15 ⁄4 19 11⁄4 32 1.2 0.54
3 7 7
⁄4 20 ⁄8 22 1 ⁄16 37 1.6 0.71
5
1 25 1 25 1 ⁄8 41 2.4 1.1
1 3 15
1 ⁄4 32 1 ⁄16 30 1 ⁄16 49 3.9 1.8
1 7 1
B B 1 ⁄2 40 1 ⁄16 37 2 ⁄8 54 5.3 2.4
2 50 13⁄4 44 21⁄2 64 9.0 4.1
A A
1 15 15
2 ⁄2 65 1 ⁄16 49 2 ⁄16 75 14 6.5
A B 5 3
3 80 2 ⁄16 59 3 ⁄8 86 21 10
15 1
4 100 2 ⁄16 75 4 ⁄8 105 34 15
Weight
Reducing Tee Size A, B C D, E F
black
Figure 426
NPS DN NPS DN NPS DN in mm in mm in mm in mm lbs kg
3 3 1 3 7 5 3
⁄4 20 ⁄4 20 ⁄2 15 ⁄4 19 ⁄8 22 1 ⁄16 33 1 ⁄8 35 1.4 0.62
1 3
⁄2 15 ⁄4 19 1 25 13⁄8 35 11⁄2 38 2.0 0.9
1 25 1 25 3 7 1 9
⁄4 20 ⁄8 22 1 25 1 ⁄2 38 1 ⁄16 40 2.2 1.0
3 15
⁄4 20 ⁄16 24 11⁄8 29 15⁄8 41 111⁄16 43 3.2 1.5
11⁄4 32 11⁄4 32
1 25 11⁄16 27 13⁄16 30 13⁄4 44 113⁄16 47 3.5 1.6
3 1 11 7
⁄4 20 1 25 1 ⁄4 32 1 ⁄16 43 1 ⁄8 48 4.0 1.8
1 1 1 5 13 15
1 ⁄2 40 1 ⁄2 40 1 25 1 ⁄8 29 1 ⁄16 33 1 ⁄16 47 1 ⁄16 49 4.3 1.9
D E 11⁄4 32 15⁄16 33 13⁄8 35 2 51 21⁄16 52 5.0 2.3
3
A B ⁄4 20 11⁄8 29 17⁄16 37 17⁄8 48 2 51 6.2 2.8
1 1 1
1 25 1 ⁄4 32 1 ⁄2 38 2 51 2 ⁄8 54 6.6 3.0
C F 2 50 2 50 1 3 9 3 1
1 ⁄4 32 1 ⁄8 35 1 ⁄16 40 2 ⁄16 56 2 ⁄4 57 7.1 3.2
11⁄2 40 11⁄2 38 15⁄8 41 25⁄16 59 25⁄16 59 7.7 3.5
PF – 92
Cast Iron Threaded
Safety Valve Discharge
D
H Safety valve discharge Elbow - Cast Iron
C Threaded Inlet: Figure 1538
G Flanged Inlet: Figure 1538F
L K
E Pipe Tap J
B
Riser
Elbow Weight
Pipe Weight
Pipe B C D E F G H J K L Figure
Size Figure
Size 1538
A 1538F
NPS DN in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm lbs kg
1 1 11 5 1 5 15 1 3 3
2 ⁄2 65 3 ⁄2 89 2 ⁄ 16 68 4 ⁄ 16 110 8 ⁄2 216 1 ⁄8 41 1 ⁄ 16 49 2 ⁄8 54 2 ⁄4 70 ⁄4 19 — — — — 12 5.4 — —
3 80 4 102 31⁄ 8 79 47⁄ 8 124 91⁄ 2 241 15⁄ 8 41 25⁄ 16 59 29⁄ 16 65 31⁄ 8 79 3
⁄4 19 — — — — 15 6.8 — —
1 7 5 1 3 5 7 7 3
3 ⁄2 90 5 127 3 ⁄ 16 87 5 ⁄ 16 135 10 ⁄ 4 260 1 ⁄4 44 2 ⁄8 67 2 ⁄8 73 3 ⁄ 16 87 ⁄4 19 — — — — 24 10.9 — —
3 3 3 15 3 3 3
4 100 5 127 3 ⁄4 95 5 ⁄4 146 11 279 1 ⁄4 44 2 ⁄ 16 75 3 ⁄ 16 81 3 ⁄4 95 ⁄4 19 — — — — 27 12.2 — —
1 3 1 7 9 15 3 3
5 125 6 152 4 ⁄2 114 6 ⁄4 171 12 ⁄ 2 318 1 ⁄8 48 3 ⁄ 16 90 3 ⁄ 16 100 4 ⁄8 111 ⁄4 19 — — — — 40 18 — —
1 5 3 3 9 3
6 150 8 203 5 ⁄8 130 7 ⁄8 194 13 ⁄ 4 349 2 51 4 ⁄ 16 106 4 ⁄ 16 116 5 127 ⁄4 19 — — — — 53 24 — —
9 9 3 3 15 3 3 1
8 200 10 254 6 ⁄ 16 167 8 ⁄ 16 217 17 432 2 ⁄8 60 5 ⁄8 137 5 ⁄ 16 151 6 ⁄8 162 1 25 10 ⁄ 4 273 13 ⁄ 2 343 104 47 140 64
Following are the advantages of Anvil safety valve discharge

elbow for piping connections to safety valves when attached to
LESS THAN 7' - 0" (2.1 M)

boilers, etc.: RECOMMENDED
❑ Drip pan for removing condensate and rain water cast LENGTH NOT
integral with elbow
❑ Strains on safety valve minimized
❑ Pipe tap J is standard
With multiple pop safety valve, leakage of vapor at any

discharge elbow indicates valve in operation.
Steel elbows and flanged elbows furnished on order.
Elbows with flanged inlet in sizes smaller than 8 NPS (200 DN)
can be furnished by using the threaded discharge elbow, pipe
nipple and forged carbon steel companion flanges.
PROVIDE
SUITABLE
ANCHOR
RISER "A"
NIPPLE
9" (229mm)
LONG D
OPEN DRAIN
TO WASTE
PF – 93
Cast Iron Drainage Fittings
Anvil drainage fittings have sufficient sweep to allow free unob- Coated drainage fittings are avai able in hot dipped, galvanized
structed flow. They are made with a shoulder of the same diame- finish (in sizes listed). Coated drainage fittings are made to order.
ter as the inside of the pipe.Thus, continuous passage is created
90° type drainage fittings are normally tapped with pitch of 1⁄ 4 inch
when the pipe is screwed to the shoulder.There is no place for
(6mm) to the foot.
solid matter to collect and clog in the pipe. Also, Anvil drainage fit-
tings are recessed and threaded for wrought pipe. UNPITCHED 90° drainage fittings are P.O.A. only.
Weight Weight
90° Short Turn 60° Short Turn Elbow Size A
Size A black
Elbow black galv. Figure 703
NPS Dn in mm lbs kg
Figure 701◊
NPS Dn in mm lns kg lbs kg
11⁄2 40 31⁄2 89 2.6 1.2
A
1 15
1 ⁄2 40 1 ⁄ 16 49 1.9 0.87 2.0 0.90
A 2 50 21⁄ 4 57 3.0 1.4 3.2 1.4
3 80 31⁄ 16 78 7.1 3.2 7.2 3.3 A 2 50 4 102 4.5 2.1
4 100 313⁄ 16 98 14 6.2 14 6.3
A 5 125 41⁄ 2 114 20 9 — —
1
6 150 5 ⁄8 130 33 15 — —
Weight
221⁄ 2° Elbow Size A
black galv.
90° Reducing Weight Figure 707
Size A B NPS DN in mm lbs kg lbs kg
Short Turn black
Elbow
A 11⁄2 40 11⁄4 32 1.6 0.75 — —
Figure 701R◊ NPS DN NPS DN in mm in mm lbs kg
A
A 11⁄ 2 32 11⁄ 4 32 17⁄ 8 48 111⁄ 16 43 1.7 0.77 2 50 17⁄16 37 3.1 1.4 3.1 1.4
B
Weight
2 40 11⁄ 2 40 21⁄ 8 54 2 51 2.5 1.1 111⁄ 4° Elbow Size A
black
Figure 708
NPS DN in mm lbs kg
Weight A 11⁄2 40 11⁄4 32 1.8 0.82

90° Long Turn Size A
Elbow black galv. A
Figure 702◊ 2 50 13⁄8 35 2.7 1.2
11⁄2 40 21⁄2 64 2.2 1.0 2.3 1.1

A 45° Long Turn Weight
Size A
2 50 1
3 ⁄16 78 3.6 1.6 3.8 1.7 Elbow black galv.
Figure 706 NPS DN in mm lbs kg lbs kg
A 3 80 41⁄4 108 9.0 4.1 — —
11⁄2 40 17⁄8 48 2.1 1.0 2.4 1.1
A
4 100 53⁄16 132 16 7.4 — —
A 3 80 215⁄16 75 7.4 3.4 — —

90° Extra Weight
Size A
Long Turn black
Elbow
Figure 702A◊ NPS DN in mm lbs kg Weight
45° Short Turn Size A
Elbow black galv.
A Figure 705
1 5
11⁄ 2 40 13⁄ 4 44 2.6 1.2 1 ⁄4 32 1 ⁄16 33 — — 1.4 0.63
A 11⁄2 40 17⁄16 37 1.7 0.78 1.8 0.79
A
2 50 111⁄16 43 2.8 1.3 2.9 1.3

3 80 23⁄16 56 6.3 2.9 6.5 2.9
A
4 100 25⁄8 67 11 5.2 12 5.4
◊Inlets tapped, pitched .25" (6mm) to the foot. 6 150 37⁄16 87 28 13 — —
Inlets of reducing fittings are always the smallest openings.
PF – 94
Shortest Offset and Face to Face With Use of Close Nipple
B
[Face to Face]
Length of
Close Nipple
A[offfset]
Length 60° Short 60° Long 45° Short 45° Long

Size Close Figure 703 Figure 704 Figure 705 Figure 706
Nipple A B A B A B A B
NPS DN in mm in mm in mm in mm in mm in mm in mm in mm in mm
1 5 7 11 1 1 3 3 1
1 ⁄4 32 1 ⁄8 41 3 76 4 ⁄8 124 3 ⁄16 94 6 ⁄8 156 2 ⁄8 54 4 ⁄4 121 2 ⁄4 70 6 ⁄4 159
11⁄2 40 13⁄4 44 31⁄2 89 51⁄2 140 43⁄16 106 615⁄16 176 23⁄8 60 51⁄4 133 3 76 63⁄4 171
2 50 2 51 41⁄8 105 61⁄2 165 47⁄8 124 715⁄16 202 213⁄16 73 63⁄16 157 35⁄8 92 81⁄8 206
21⁄2 65 21⁄2 64 415⁄16 125 77⁄8 200 51⁄16 129 89⁄16 217 31⁄4 83 71⁄16 179 43⁄16 106 91⁄2 241
5 9 3 11 9 15 5 1
3 80 2 ⁄8 67 5 ⁄16 141 9 229 5 ⁄4 146 9 ⁄16 246 3 ⁄16 90 7 ⁄16 202 4 ⁄8 117 10 ⁄2 267
4 100 27⁄8 73 61⁄2 165 101⁄2 267 73⁄16 183 123⁄16 310 41⁄4 108 91⁄2 241 51⁄2 140 121⁄2 318
5 125 3 76 71⁄4 184 1115⁄16 303 — — — — 43⁄4 121 107⁄8 276 61⁄4 159 141⁄2 368
1 7 1 5 1 3 1
6 150 3 ⁄8 79 7 ⁄8 200 13 ⁄16 332 — — — — 5 ⁄16 135 12 ⁄8 308 7 ⁄8 187 17 ⁄8 435
1 3 3 9
8 200 3 ⁄2 89 9 ⁄8 238 16 ⁄16 411 — — — — 6 ⁄16 167 15 381 9 229 — —
10 250 37⁄8 98 — — — — — — — — 715⁄16 202 185⁄16 465 — — — —
Shortest Offset and Face to Face With Use of Close Nipple (continued)
B
[Face to Face]
Length of
Close Nipple
A[offfset]
Length 221⁄ 2° 111⁄ 4° 55⁄ 8°

Size Close Figure 707 Figure 708 Figure 709
Nipple A B A B A B
NPS DN in mm in mm in mm in mm in mm in mm in mm
11⁄4 32 15⁄8 41 1 25 411⁄16 119 1
⁄2 13 49⁄16 116 1
⁄4 6 51⁄16 129
1 3 1 1 5 7 5 3
1 ⁄2 40 1 ⁄4 44 1 ⁄8 29 5 ⁄4 133 ⁄8 16 5 ⁄16 138 ⁄16 8 5 ⁄4 146
2 50 2 51 13⁄8 35 61⁄8 156 11
⁄16 17 61⁄16 154 3
⁄8 10 65⁄8 168
21⁄2 65 21⁄2 64 15⁄8 41 73⁄8 187 13
⁄16 22 71⁄8 181 3
⁄8 10 73⁄16 183
5 13 5 7 7 7 11
3 80 2 ⁄8 67 1 ⁄16 47 8 ⁄16 211 ⁄8 22 7 ⁄8 200 ⁄16 11 7 ⁄16 195
7 1 9 15 5 7 3
4 100 2 ⁄8 73 2 ⁄16 52 9 ⁄16 243 ⁄16 24 8 ⁄8 219 ⁄16 11 8 ⁄16 208
5 125 3 76 21⁄4 57 1011⁄16 271 1 25 91⁄2 241 7
⁄16 11 85⁄8 219
6 150 31⁄8 79 21⁄2 64 117⁄8 302 11⁄16 27 10 254 1
⁄2 13 99⁄16 243
1 7 1 5 9 3
8 200 3 ⁄2 89 3 76 14 ⁄16 367 1 ⁄4 32 11 ⁄8 295 ⁄16 14 10 ⁄4 273
7 7 13 7 1
10 250 3 ⁄8 98 3 ⁄8 98 17 ⁄16 452 1 ⁄16 37 13 ⁄4 337 — — — —
◊ inlets tapped, pitched 1⁄ 4 inch (6mm) to the foot, Inlets of reducing ﬁttings are always the smallest openings.
PF – 95
90° Street Elbow Figure 718◊

Tee Figure 722◊
A A
Weight Weight
Size A B Size A B
NPS DN in mm in mm lbs kg lbs kg NPS DN in mm in mm lbs kg lbs kg
11⁄2 40 3 76 17⁄8 48 2.0 0.9 2.1 1.0 11⁄2 40 37⁄8 98 115⁄16 49 2.6 1.2 2.7 1.2
2 50 31⁄4 83 23⁄16 56 — — 3.2 1.4 2 50 41⁄2 114 21⁄4 57 4.7 2.1 4.8 2.2
45° Street Elbow Figure 719 Reducing Tee Figure 723◊

C
B
D
Weight Weight
Size A B Size A B
NPS DN in mm in mm lbs kg lbs kg NPS DN NPS DN NPS DN in mm in mm lbs kg lbs kg
1 1 3
2 50 2 50 1 ⁄2 40 4 ⁄16 103 2 ⁄16 56 3.8 1.7 — —
11⁄2 40 2 51 11⁄4 32 1.6 0.74 1.6 0.75
2 50 21⁄4 57 111⁄16 43 2.7 1.2 2.7 1.2
Sanitary Tees 90° Short Turn Figure 726◊ Y-branch 90° Long Turn Figure 730◊
B B
A A
Weight Weight
Size A B C Size A B C
NPS DN in mm in mm in mm lbs kg lbs kg NPS DN in mm in mm in mm lbs kg lbs kg
1 1 1 1
1 ⁄2 40 4 ⁄4 108 2 ⁄2 64 2 ⁄2 64 3.1 1.4 3.2 1.4
11⁄2 40 53⁄8 137 41⁄8 105 11⁄4 32 4.4 2.0 — —
2 50 53⁄16 132 31⁄16 78 31⁄16 78 5.1 2.3 5.2 2.3 2 50 7 178 51⁄4 133 13⁄4 44 6.7 3.0 6.7 3.1
3 80 71⁄4 184 41⁄4 108 41⁄4 108 12 5.3 12 5.6 3 80 97⁄8 251 71⁄2 191 23⁄8 60 16 7.4 — —
3 3 3
4 100 8 ⁄4 222 5 ⁄16 132 5 ⁄16 132 21 10 21 10 4 100 13 330 97⁄8 251 31⁄8 79 33 15 — —
◊ inlets tapped, pitched 1⁄ 4 (6mm) inch to the foot, Inlets of reducing fittings are always the smallest openings.
PF – 96
Sanitary Tees 90° Reducing Short Turn Figure 727◊ Y-branch 90° Reducing Long Turn Figure 731◊
B B
A C
A
Weight
Size A B C
Weight black galv.
Size A B C
black galv. NPS DN in mm in mm in mm lbs kg lbs kg
NPS DN in mm in mm in mm lbs kg lbs kg 2x2 50 x 50
53⁄4 146 43⁄8 111 15⁄16 24 5.2 2.4 5.3 2.4
x 11⁄2 x 40
2x2 50 x 50
45⁄8 117 215⁄16 75 211⁄16 68 4.2 1.9 4.3 2.0
x 11⁄2 x 40
2 x 11⁄2 50 x 40
53⁄16 132 31⁄16 78 31⁄16 78 4.8 2.2 – – Y-branch 45° Figure 734
x2 x 50
2 x 11⁄2 50 x 40
45⁄8 117 215⁄16 75 211⁄16 68 4.3 2.0 – –
x 11⁄2 x 40
C A
Sanitary Tees 90° Double Short Turn Figure 728◊
B
B
Weight
A Size A B C
black galv.
C
11⁄2 40 51⁄2 140 35⁄8 92 35⁄8 92 4.0 1.8 4.1 1.9

Weight
Size A B C
black galv. 2 50 61⁄2 165 43⁄8 111 43⁄8 111 5.6 2.5 5.7 2.6
3 80 9 229 63⁄16 157 63⁄16 157 12 5.4 13 5.9
11⁄2 40 41⁄4 108 5 127 21⁄2 64 4.5 2.1 4.6 2.1

4 100 107⁄8 276 711⁄16 195 711⁄16 195 25 11 25 11
2 50 53⁄16 132 61⁄8 156 31⁄16 78 6.1 2.8 — —

Y-branch 45° Reducing Figure 735
Sanitary Tee 90° Reducing Double Short Turn Figure 729◊ C A
B
B
A
C Weight
Size A B C
black galv.
Weight
Size A B C 2x2 50 x 50
black 57⁄8 149 41⁄8 105 41⁄16 103 4.8 2.2 4.9 2.2
x 11⁄2 x 40
NPS DN in mm in mm in mm lbs kg 3x3 80 x 80
73⁄8 187 53⁄4 146 55⁄16 135 10 4.6 11 4.8
x2 x 50
2 x 11⁄2 50 x 40 45⁄8 117 57⁄8 149 211⁄16 68 5.8 2.6
4x4 100 x 100 1
9 ⁄4 235 73⁄16 183 67⁄8 175 21 9 — —
x3 x 80
◊inlets tapped, pitched ⁄ 4 (6mm) inch to the foot
1
Inlets of reducing fittings are always the smallest openings.
PF – 97
Weight
45° Double Y-branch Size A B C
black
Figure 736
B
C 11⁄2 40 51⁄2 140 35⁄8 92 35⁄8 92 5.1 2.3

A
Weight Weight
Coupling Size A Size A
black Tucker Connection
Figure 753 black galv.
Figure 744+
NPS DN in mm lbs kg
A 11⁄2 40 4 102 4.0 1.8 — —
11⁄2 40 33⁄8 86 1.8 0.79 2 50 41⁄2 114 5.4 2.4 5.6 2.5
A 3 80 43⁄4 121 9.3 4.2
4 100 613⁄16 174 20 9.1 — —
+Size 4" (100DN) only furnished with loose ring on request
Clean Water Weight

P-Trap Size A B C
Out Seal black galv.
Figure 752
NPS DN in mm in mm in mm in mm in mm lbs kg lbs kg
11⁄2 40 21⁄8 54 21⁄4 57 7

⁄8 22 1 25 2 51 4.7 2.1 — —
B A
C
Inlet
2 50 29⁄16 65 23⁄4 70 7
⁄8 22 1 25 2 51 7.2 3.3 7.3 3.3
Outlet
3 80 33⁄8 86 33⁄4 95 13⁄16 30 11⁄4 32 21⁄2 64 17 7.7 18 7.9
Cleanout 4 100 41⁄4 108 5 127 11⁄2 38 2 51 21⁄2 64 31 14 32 14
Cleanout plug not included

Outlets tapped, pitched .25"/Ft. (21mm/meter)
Water Weight
Bath P-Trap Size A B C D
Seal black
Figure 754
NPS DN in mm in mm in mm in mm in mm lbs kg
B A
11⁄2 40 21⁄8 54 23⁄8 60 43⁄8 111 45⁄8 117 2 51 3.9 1.8
Inlet Outlet
C D
2 50 21⁄2 64 213⁄16 73 55⁄16 135 55⁄16 135 2 51 6.3 2.8
Outlets tapped, pitched .25"/Ft. (21mm/meter)
PF – 98
Cast Iron Flanged Fittings
Class 125, Standard
Specifications (450, 500 & 600 DN) reducing on the outlet in the following sizes are to
short body pattern and are to the dimensions shown as follows: All tees,
All standard or “Class 125” Cast Iron Flanged Fittings in sizes listed are crosses and laterals reducing on the run only have the same center-to-face
made to ASME and are marked 125 for pipe sizes 12 NPS (300 DN) and and face-to-face dimensions as a straight fitting of the size of the largest
smaller; 100 for pipe sizes 14 NPS (350 DN) and larger; and have plain opening. Sizes 16 NPS (400 DN) and smaller reducing on the outlet have
faces. Unless otherwise specified, cast iron flanges and fittings are drilled
and faced in accordance with ASME B 16.1. same dimensions as a straight fitting of the size of the largest opening.
Anvil fittings in this section, up to 16 NPS (400 DN) inclusive, are
included in the “List of Inspected Fire Protection Equipment and Materi- Reducing Tees and Reducing Crosses
als” issued by the Underwriters’ Laboratories, Inc. Center to Face
Nominal Size of Outlet Center to
Coating Pipe Size and Smaller Face Run
Outlet or
Flanged fittings are available both black and galvanized. Consult a Anvil
Side Outlet
representative for available sizes. NPS DN in mm in mm in mm
Sizes 18 450 12 305 13 330 151⁄2 394
20 500 14 356 14 356 17 432
Size of all fittings scheduled indicates nominal inside diameter of ports. 24 600 16 406 15 381 19 483
standard reducing elbows carry the same dimensions center-to-face as
regular elbows of largest straight size.Sizes 18, 20 and 24 NPS
Reducing Laterals
Nominal Pipe Size Size of Outlet and Smaller Center to Face Run Center to Face Branch
NPS DN in mm in mm in mm
18 450 8 203 25 635 271⁄2 699
20 500 10 254 27 686 291⁄2 749
24 600 12 305 311⁄2 800 341⁄2 876
All Reducing Fittings in the sizes 18, 20 and 24 NPS (450, 500 & 600 DN) can also be supplied to Straight Size dimensions if specified.
Prices on application.
Tolerances
To order reducing companion flanges, specify threaded or reduced size An inspection limit of plus or minus 1/32 inch (1mm) shall be allowed
first, then the outside diameter of flange wanted. For instance, if a reduc- on all center to contact surface dimensions for sizes up to and including
ing flange is required to connect a 5-inch (127mm) pipe to an 8-inch 10 NPS (250 DN); plus or minus 1⁄ 16 inch (2mm)on sizes larger than 10
(203mm) flanged valve or fitting having a 131⁄ 2-inch o.d. (343mm) NPS (250 DN). Inspection limit of plus or minus 1⁄ 16 inch (2mm) shall be
flange, order: 5 x 131⁄ 2-inch (127 x 343mm) standard reducing flange. allowed on all contact surface to contact surface dimensions for sizes up
to and including 10 NPS(250 DN); plus or minus 1⁄ 8 inch (3mm) on sizes
Dimensions larger than 10 NPS (250 DN).The largest opening in the fitting governs
Bolt holes, for bolts smaller than 13⁄ 4 inches (44mm) in diameter are the tolerance to be applied to all openings.
drilled 1⁄ 8 inch larger than bolt diameter; for bolts 13⁄ 4 inch (44mm) and
larger, bolt holes are 1⁄ 4 inch (6mm) larger than bolt diameter. Bolt holes ❑ Patterns are designed to produce castings having the wall thick-
straddle the center line. Bolt holes are spot faced on order only. nesses given in the tables. The wall thicknesses of the castings at
no point shall be less than 87.5% of the dimensions given.
90° Straight Elbow 45° Straight Elbow

C
A
C
Thickness Thickness
Flange Flange
Size A Min. Weight Size A Min. Weight
Diam. Wall Diam. Wall
Flange Flange
NPS DN in mm in mm in mm in mm lbs kg NPS DN in mm in mm in mm in mm lbs kg
11⁄2 40 4 102 5 127 9
⁄16 14 5
⁄16 8 9.0 4.1 11⁄2 40 21⁄4 57 5 127 9
⁄16 14 5
⁄16 8 8.0 3.6
2 50 41⁄2 114 6 152 5
⁄8 16 5
⁄16 8 14 6.4 2 50 21⁄2 64 6 152 5
⁄8 16 5
⁄16 8 12 5.4
21⁄2 65 5 127 7 178 11
⁄16 17 5
⁄16 8 19 8.6 21⁄2 65 3 76 7 178 11
⁄16 17 5
⁄16 8 17 7.7
3 80 51⁄2 140 71⁄2 191 3
⁄4 19 3
⁄8 10 24 11 3 80 3 76 71⁄2 191 3
⁄4 19 3
⁄8 10 20 9.1
31⁄2 90 6 152 81⁄2 216 13
⁄16 22 7
⁄16 11 31 14 31⁄2 90 31⁄2 89 81⁄2 216 13
⁄16 22 7
⁄16 11 27 12
4 100 61⁄2 165 9 229 15
⁄16 24 1
⁄2 13 41 19 4 100 4 102 9 229 15
⁄16 24 1
⁄2 13 36 16
5 125 71⁄2 191 10 254 15
⁄16 24 1
⁄2 13 52 24 5 125 41⁄2 114 10 254 15
⁄16 24 1
⁄2 13 45 20
9 9
6 150 8 203 11 279 1 25 ⁄16 14 68 31 6 150 5 127 11 279 1 25 ⁄16 14 60 27
8 200 9 229 131⁄2 343 11⁄8 29 5
⁄8 16 110 50 8 200 51⁄2 140 131⁄2 343 11⁄8 29 5
⁄8 16 94 43
10 250 11 279 16 406 13⁄16 30 3
⁄4 19 175 79 10 250 61⁄2 165 16 406 13⁄16 30 3
⁄4 19 145 66
12 300 12 305 19 483 11⁄4 32 13
⁄16 23 250 113 12 300 71⁄2 191 19 483 11⁄4 32 13
⁄16 23 220 100
PF – 99
Class 125, Standard
Taper Reducing Size A Weight Long Radius Elbow Reducing

B Weight
Elbow Reducing Size
Figure 803 NPS DN NPS DN in mm lbs kg
Figure 804R NPS DN in mm lbs kg
21⁄2 65 2 50 5 127 18 8.2
3x2 80 x 50 73⁄4 197 23 10
2 50 19 8.6
1
3 80 5 ⁄2 140
21⁄2 65 22 10
4x3 100 x 80 9 229 46 21
2 50 29 13
4 100 21⁄2 65 61⁄2 165 31 14 5x4 125 x 100 101⁄4 260 58 26
3 80 33 15
B 6x4 150 x 100 78 35
3 80 40 18
5 125 1
7 ⁄2 191 111⁄2 292
4 100 48 22 6x5 150 x 125 81 37
A 3 80 47 21
B
6 150 4 100 8 203 56 25 8x6 200 x 150 14 356 130 59
5 125 60 27
A 10 x 8 250 x 200 161⁄2 419 205 93
4 100 77 35
8 200 5 125 9 229 82 37
6 150 90 41
6 150 125 57
10 250 11 279
8 200 150 68
6 150 165 75
12 300 8 200 12 305 190 86
10 250 220 100
Flange Thickness
Long Radius Elbow Size B Weight
Diam. Flange (min.) Wall
Straight Figure 804
NPS DN in mm in mm in mm in mm lbs kg
2 50 61⁄2 165 6 152 5
⁄8 16 5
⁄16 8 16 7.3
21⁄2 65 7 178 7 178 11

⁄16 17 5
⁄16 8 23 10
3 80 73⁄4 197 71⁄2 191 3

⁄4 19 3
⁄8 10 28 13
15 1
4 100 9 229 9 229 ⁄16 24 ⁄2 13 48 22
B 6 150 111⁄2 292 11 279 1 25 9

⁄16 14 85 39
8 200 14 356 131⁄2 343 11⁄8 29 5

⁄8 16 145 66
10 250 161⁄2 419 16 406 13⁄16 30 3

⁄4 19 230 104
B
12 300 19 483 19 483 11⁄4 32 13
⁄16 22 350 159
PF – 100
Class 125, Standard
Dia. of Thickness Size of

Center
Round Supporting
Base Elbow Size to Base Base Rubs Weight
Base Pipe for
Figure 805 R T U
S Base
7 9 1
3 80 4 ⁄8 124 5 127 ⁄16 14 ⁄2 13 2 51 36 16
1 5 1
4 100 5 ⁄2 140 6 152 ⁄8 16 ⁄2 13 2 51 59 27
5 125 61⁄4 159 7 178 11
⁄16 17 5
⁄8 16 21⁄2 64 76 34
11 5
6 150 7 178 7 178 ⁄16 17 ⁄8 16 21⁄2 64 110 50
R U 8 200 83⁄8 213 9 229 15
⁄16 24 7
⁄8 22 4 102 158 72
3 15 7
10 250 9 ⁄4 248 9 229 ⁄16 24 ⁄8 22 4 102 224 102
S T
12 300 111⁄4 286 11 279 1 25 1 25 6 152 324 147
Bases, when drilled, should be drilled to the template of the flange of the supporting pipe size.
Size of base determined by size of largest opening of fitting. Bases will be furnished not faced and not drilled unless otherwise specified.
When ordered faced, dimensions “R” and “T” will be slightly less than shown in table.
Flange Thickness
Side Outlet Elbow Size A Weight
Dia. Flange Wall
Figure 808
4 100 61⁄2 165 9 229 15

⁄16 24 1
⁄2 13 59 27
9
6 150 8 203 11 279 1 25 ⁄16 14 96 44
A
A 8 200 9 229 131⁄2 343 11⁄8 29 5

⁄8 16 150 68
Flange Thickness Weight

Straight Tee Size A AA
Dia. Flange Wall
Figure 811
11⁄2 40 4 102 8 203 5 127 9

⁄16 14 5
⁄16 8 15 6.8
2 50 41⁄2 114 9 229 6 152 5

⁄8 16 5
⁄16 8 21 10
21⁄2 65 5 127 10 254 7 178 11

⁄16 17 5
⁄16 8 30 14
3 80 51⁄2 140 11 279 71⁄2 191 3

⁄4 19 3
⁄8 10 37 17
4 100 61⁄2 165 13 330 9 229 15

⁄16 24 1
⁄2 13 64 29
A
5 125 71⁄2 191 15 381 10 254 15
⁄16 24 1
⁄2 13 81 37
A
9
6 150 8 203 16 406 11 279 1 25 ⁄16 14 105 48
A
8 200 9 229 18 457 131⁄2 343 11⁄8 29 5

⁄8 16 165 75
10 250 11 279 22 559 16 406 13⁄16 30 3

⁄4 19 270 122
12 300 12 305 24 610 19 483 11⁄4 32 13

⁄16 22 380 172
PF – 101
Class 125, Standard
Reducing Tee: Reducing Tee:

(cont.)
4 NPS 4 NPS
(100 DN) (100 DN)
6 NPS 6 NPS 5 NPS
5 NPS
(150 DN) (150 DN)
(125 DN) (125 DN)
Read as: Read as:
6x5x 4 6x5x 4
(150 x 125 x 100DN) (150 x 125 x 100DN)
Dimentions for reducing tees for sizes listed 1 NPS (25 DN) and Dimentions for reducing tees for sizes listed 1 NPS (25 DN) and
smaller have same center to face dimensions as straight size fittings smaller have same center to face dimensions as straight size fittings
corresponding to the largest opening. Dimentions of sizes not listed corresponding to the largest opening. Dimentions of sizes not listed
furnished on request. furnished on request.
Size Weight Size Weight

NPS DN NPS DN NPS DN LBS kg NPS DN NPS DN NPS DN LBS kg
1
2 ⁄2 50 15 1
2 ⁄2 65 2 50 28 13 6 150 140 64
4 100
2 50 3 80 33 15 8 200 146 66
21⁄2 65 3 80 35 16 5 125 8 200 149 68
2 50 34 15 4 100 125 57
3 80 6 150 6 150 144 65
11⁄2 40 32 15
3 80 1 8 200 159 72
2 ⁄2 65 35 16 8 200
3 80 140 64
4 100 56 25
4 100 143 65
2 50 4 100 50 23
5 125 149 68
21⁄2 65 49 22 8 200
21⁄2 65 6 150 156 71
4 100 56 25
10 250 235 107
3 80 53 24
3 80 12 300 275 125
4 100 59 27
4 100 6 150 6 150 342 155
11⁄2 40 50 23
6 150 220 100
2 50 51 23
8 200 8 200 232 105
4 100 21⁄2 65 56 25
10 250 262 119
3 80 57 26 3 80 218 99
6 150 88 40 10 250
4 100 225 102
4 100 73 33 5 125 235 107
4 100 10 250
5 125 80 36 6 150 240 109
1
2 ⁄2 65 66 30 8 200 262 119
5 125
3 80 71 32 12 300 340 154
5 125
4 100 80 36 8 200 298 135
6 150 102 46 8 200
12 300 340 154
2 50 6 150 83 38 6 150 310 141
3 80 80 36 8 200 320 145
3 80 4 100 85 39 10 250
10 250 340 154
6 150 91 41 12 300 12 300 365 166
3 80 86 39 4 100 291 132
4 100 4 100 88 40 5 125 295 134
6 150 94 43 12 300 6 150 323 147
6 150 4 100 91 41 8 200 330 150
5 125
5 125 102 46 10 250 362 164
2 50 86 39
21⁄2 65 90 41
3 80 92 42
6 150
4 100 97 44
5 125 105 48
8 200 142 64
PF – 102
Class 125, Standard
Flange Min. Flange Wall

Cross Size A AA Weight
Diameter Thickness Thickness
Figure 821
2 50 41⁄2 114 9 225 6 152 5
⁄8 16 5
⁄16 8 28 13
1 11 5
2 ⁄2 65 5 127 10 250 7 178 ⁄16 17 ⁄16 8 39 18
1 1 3 3
3 80 5 ⁄2 140 11 275 7 ⁄2 191 ⁄4 19 ⁄8 10 48 22
1 15 1
4 100 6 ⁄2 165 13 325 9 229 ⁄16 24 ⁄2 13 82 37
1 15 1
5 125 7 ⁄2 191 15 375 10 254 ⁄16 24 ⁄2 13 105 48
A A 6 150 8 203 16 400 11 279 1 25 9
⁄16 14 135 61
A 8 200 9 229 18 450 131⁄2 343 11⁄8 29 5

⁄8 16 210 95
10 250 11 279 22 550 16 406 13⁄16 30 3

⁄4 19 330 150
A
12 300 12 305 24 600 19 483 11⁄4 32 13
⁄16 22 470 213
Face to Center to Center to Min.

Flange Wall
Lateral Size Face Face Face Flange Weight
Diameter Thickness
Figure 823 D E F Thickness
2 50 101⁄2 267 8 203 21⁄2 64 6 152 5

⁄8 16 5
⁄16 8 25 11
21⁄2 65 12 305 91⁄2 241 21⁄2 64 7 178 11

⁄16 17 5
⁄16 8 36 16
3 80 13 330 10 254 3 76 71⁄2 191 3

⁄4 19 3
⁄8 10 44 20
15 1
4 100 15 381 12 305 3 76 9 229 ⁄16 24 ⁄2 13 75 34
5 125 17 432 131⁄2 343 31⁄2 89 10 254 15

⁄16 24 1
⁄2 13 96 44
45°
D E 6 150 18 457 141⁄2 368 31⁄2 89 11 279 1 25 9
⁄16 14 125 57
E
F
8 200 22 559 171⁄2 445 41⁄2 114 131⁄2 343 11⁄8 29 5
⁄8 16 210 95
Flange Min. Flange Wall

True Y Size A B Weight
Diameter Thickness Thickness
Figure 810
4 100 3 76 61⁄2 165 9 229 15

⁄16 24 1
⁄2 13 60 27
6 150 31⁄2 89 8 203 11 279 1 25 9

⁄16 14 101 46
B
B
A 8 200 41⁄2 114 9 229 131⁄2 343 11

⁄16 17 5
⁄8 16 154 70
PF – 103
Class 125, Standard
Concentric Reducer Size F Weight Size F Weight

Eccentric Reducer
Figure 825 NPS DN NPS DN in mm lbs kg Figure 826
NPS DN NPS DN in mm lbs kg
2 50 11⁄2 40 51⁄2 140 12 5.4
11⁄2 40 51⁄2 140 14 6.4 2 50 16 7.3
21⁄2 65
1 3 80 6 152
2 ⁄2 65 51⁄2 140 12 5.4
21⁄2 65 22 10
11⁄2 40 14 6.4
3 80 2 50 6 152 16 7.3 2 50 28 13
21⁄2 65 19 8.6
2 50 24 11 4 100 21⁄2 65 7 178 28 13
1
2 ⁄2 65 26 12
4 100 7 178 3 80 28 13
F 3 80 28 13
F
31⁄2 90 31 14 5 125 4 100 8 203 39 18
21⁄2 65 31 14
5 125 3 80 8 203 32 15 3 80 47 21
4 100 39 18
6 150 4 100 9 229 50 23
2 50 34 15
21⁄2 65 37 17 5 125 51 23
6 150 3 80 9 229 39 18
4 100 47 21 4 100 71 32
5 125 50 23
8 200 5 125 11 279 76 34
4 100 66 30
8 200 5 125 11 279 71 32
6 150 77 35
6 150 77 35
4 100 85 39 6 150 107 49
5 125 90 41 10 250 12 305
10 250 12 305 8 200 120 54
6 150 100 45
8 200 120 54
8 200 155 70
6 150 140 64
12 300 14 356
12 300 8 200 14 356 155 70 10 250 180 82
10 250 180 82
Method of designating location of tapped holes for drains when specified

Class 125 (standard) and Class 250 (extra heavy)
R R
S H R R L H L
E Y Y K E G S S M K E G P M
G M J K
F T T N T T N F N
90° Elbow (Straight Size) 90° Elbow Tee (Straight Size) Cross (Straight Size)
R R H R R L H R R
V V L
E G M E K
Y Y K G S S M G S S M
G M F H N K E K
F T T N F T N
T F T T N
Concentric Reducer
90° Elbow (Reducing Size) Tee (Reducing Size) 45° Lateral (Straight Size)
R W X Y X
V V Z Z Y R R
R R
G E K M
F GH NMK F N E S K
E G Y G Y K S
G F N M
T T
F T T S R RST
T F
T T 45° Elbow
Eccentric Reducer
front view side view 90° Base Elbow
Side Outlet Elbow (Straight Size) Note: These sketches show two views of the same fitting and represent fittings with
symmetrical shapes except for the side outlet elbow (straight sizes)
PF – 104
Class 250, Extra Heavy
Specifications Dimensions
All Extra Heavy or “Class 250” cast iron flanged fittings in All Extra Heavy or “Class 250” cast iron flanged fittings have
sizes listed are made to ASME B16.1, are marked “250”. All a raised face (for gaskets) 1⁄ 16-inch (2mm) high inside of
Class 250 Cast Iron flange fittings are faced and drilled to bolt holes. For bolts 11⁄ 8-inch (29mm) smaller, the bolt hole
ASME B 16.1, unless otherwise specified. is drilled 1⁄ 8-inch (3mm) larger than the diameter of bolt.
Anvil fittings’ sizes 1NPS to 10 NPS (25 to 250 DN) shown Bolt holes straddle the center line and the steel bolts with
in this section are included in the “List of Inspected Fire square heads and hex nuts are recommended.
Protection Equipment and Materials” issued by the Reducing elbows have same center to face dimensions as
Underwriters’ Laboratories, Inc. regular elbows of the largest straight size.
Sizes Reducing tees NPS 16 (400 DN) and smaller have same the
To avoid delay in shipment, where other than sizes given center-to-face and face-to-face dimensions as a straight fit-
are ordered, we carry in stock reducing flanges, the use of ting of the size of the largest opening. Dimensions for larger
which, in connection with straight or reducing fittings car- sizes furnished upon request.
ried in stock, enable us to fill orders promptly for reducing
sizes where specifications will permit reduction made in
Tolerances
this manner.The reducing flanges furnished are the same Inspection limit of plus or minus 1/32-inch (1mm) is allowed
thickness as the regular companion flange of the corre- on all center to contact surface dimensions for sizes up to
sponding outside diameter and will be drilled to the tem- and including 10 NPS (250 DN) and plus or minus 1⁄ 16 inch
plate corresponding to the outside diameter unless (2mm) on sizes larger than 10 NPS (250 DN). Inspection
otherwise ordered. For fittings reduced in this manner, limit of plus or minus 1⁄ 16 inch (2mm) is allowed on all con-
please specify “reduce by flanges if necessary.” tact surface to contact surface dimensions for sizes up to
To order reducing companion flanges, specify threaded or and including 10 NPS (250 DN) and plus or minus 1⁄ 8 inch
reduced size first and follow with outside diameter. For (3mm) on sizes larger than 10 NPS. (250 DN)
instance, if a reducing flange is required to connect a 4-inch ❑ NOTE: Patterns are designed to produce castings having the
(100 DN) pipe to a 6-inch (150 DN) valve or fitting having wall thicknesses given in the tables. The wall thicknesses of
a 121⁄ 2" (315 DN) flange, order a 4 NPS x 121⁄ 2 NPS the castings at no point shall be less than 87.5% of the
(100 x 315 DN) reducing flange. dimensions given.
Coating
Flanged fittings are available in both black and galvanized.
Consult a Anvil representative for available sizes.
Dia. of Wall
Flange Flange
90° Elbows Size A Raised Thickness of Weight
Diameter Thickness
Figure 831 Face Body
2 50 5 127 61⁄2 165 7
⁄8 22 43⁄16 106 7
⁄16 11 20 9.1
21⁄2 65 51⁄2 140 71⁄2 191 1 25 415⁄16 125 1

⁄2 13 30 14
3 80 6 152 81⁄4 210 11⁄8 29 511⁄16 144 9

⁄16 14 40 18
4 100 7 178 10 254 11⁄4 32 615⁄16 176 5

⁄8 16 65 29
5 125 8 203 11 279 13⁄8 35 85⁄16 211 11

⁄16 17 87 39
A
6 150 81⁄2 216 121⁄2 318 17⁄16 37 911⁄16 246 3
⁄4 19 115 52
8 200 10 254 15 381 15⁄8 41 1115⁄16 303 13

⁄16 22 185 84
A
10 250 111⁄2 292 171⁄2 445 17⁄8 48 141⁄16 357 15
⁄16 24 290 132
12 300 13 330 20 1⁄2 508 2 51 167⁄16 418 1 25 410 186
PF – 105
Flange Flange Diam. of Raised Wall Thick. of

Elbow Size C Weight
Diameter Thickness Face Body (min.)
Figure 832
NPS Dn in mm in mm in mm in mm in mm lbs kg
1 7 3 7
2 50 3 76 6 ⁄2 165 ⁄8 22 4 ⁄16 106 ⁄16 11 18 8.2
1 1 1 15 1
2 ⁄2 65 3 ⁄2 89 7 ⁄2 191 1 25 4 ⁄16 125 ⁄2 13 28 13
3 80 31⁄2 89 81⁄4 210 11⁄8 29 511⁄16 144 9
⁄16 14 35 16
1 1 15 5
4 100 4 ⁄2 114 10 254 1 ⁄4 32 6 ⁄16 176 ⁄8 16 58 26
1 5 1
5 125 5 127 11 279 1 ⁄4 32 8 ⁄16 211 1 ⁄16 27 76 34
6 150 51⁄2 140 121⁄2 318 17⁄16 37 911⁄16 246 3
⁄4 19 105 48
C
8 200 6 152 15 381 15⁄8 41 1115⁄16 303 13⁄16 30 155 70

10 250 7 178 171⁄2 445 17⁄8 48 141⁄16 357 15⁄16 33 240 109
C
12 300 8 203 20 1⁄2 508 2 51 167⁄16 418 1 25 340 154
Taper Reducing Size A Weight Tee, Reducing on Run Size Reducing Weight
Elbow or Outlet
Figure 833 NPS Dn NPS DN in mm lbs kg Figure 842 NPS DN NPS DN lbs kg
3 80 52 24 21⁄2 65 55 25
4 100 7 178 3 80
1
2 ⁄2 65 48 22 2 50 50 23
4 100 78 35 2 50 77 35
5 125 8 203
3 80 65 29 4 100 21⁄2 65 83 38
A 5 125 100 45 3 80 84 38
6 150 81⁄2 216
4 100 93 42 5 125 4 100 125 57
6 150 155 70 In describing tees, the run is first
3 80 148 67
A 8 200 10 254 named, then the outlet, thus: 6 150
5 125 100 45 4 100 160 73
Dimensions for reducing tees for
8 200 240 109 sizes listed 16 NPS (400 DN) and 4 100 229 104
10 250 111⁄2 292 smaller have same center to face 8 200
6 150 210 95 dimension as straight size fittings 6 150 257 117
corresponding to the largest open-
ing. Dimensions of sizes not listed 6 150 369 167
furnished on request. 10 250
8 200 376 171
Min. Inside Min. Diam. of Min. Wall

Flange
Straight Tees Size Diam. of J HH Flange Raised Thickness Weight
Diam.
Figure 841 Fitting Thickness Face of Body
NPS DN in mm in mm in mm in mm in mm in mm in mm lbs kg
2 50 2 51 5 127 10 254 61⁄2 165 7
⁄8 22 43⁄16 106 7
⁄16 11 32 15
1 1 1 1 15 1
2 ⁄2 65 2 ⁄2 64 5 ⁄2 140 11 279 7 ⁄2 191 1 25 4 ⁄16 125 ⁄2 13 46 21
3 80 3 76 6 152 12 305 81⁄4 210 11⁄8 29 511⁄16 144 9

⁄16 14 58 26
4 100 4 102 7 178 14 356 10 254 11⁄4 32 615⁄16 176 5

⁄8 16 99 45
5 125 5 127 8 203 16 406 11 279 13⁄8 35 85⁄16 211 11

⁄16 17 135 61
J
6 150 6 152 81⁄2 216 17 432 121⁄2 318 17⁄16 37 911⁄16 246 3
⁄4 19 180 82
H 5 15 13
8 200 8 203 10 254 20 508 15 381 1 ⁄8 41 11 ⁄16 303 ⁄16 22 280 127
H 10 250 10 254 111⁄2 292 23 584 171⁄2 445 17⁄8 48 141⁄16 357 15
⁄16 24 430 195
12 300 12 305 13 330 26 660 201⁄2 521 2 51 167⁄16 418 1 25 620 281
PF – 106
Concentric Reducer Size G Weight

Figure 855 NPS Dn NPS DN in mm lbs kg
1 1
2 ⁄2 65 2 50 5 ⁄2 140 24 11
2 50 25 11
3 80 6 152
21⁄2 65 29 13
2 50 36 16
4 100 21⁄2 65 7 178 40 18
3 80 44 20
1
2 ⁄2 65 50 23
G
5 125 3 80 8 203 54 24
4 100 63 29
21⁄2 65 63 29
3 80 67 30
6 150 9 229
4 100 77 35
5 125 85 39
4 100 105 48
8 200 5 125 11 279 115 52
6 150 130 59
6 150 170 77
10 250 12 305
8 200 190 86
Iron Flanges - Class 125, standard

Class 125 (standard) iron flanges are manufactured to American National standard ASME B16.1. Malleable iron flanges are manufactured to ASTM A197.
Min. Length Weight

Diam. of Min. Flange Min. Diam.
Companion Flange Pipe Through
Flange Thickness of Hub
Cast Iron: Figure 1011 Size Hub Cast Iron Malleable
O Q X
Malleable: Figure 1035 Y
3 7 7 3 5
⁄4 20 3 ⁄8 98 ⁄16 11 1 ⁄4 44 ⁄8 16 1.5 0.68 — —
1 7 15 11
1 25 4 ⁄4 108 ⁄16 11 1 ⁄16 49 ⁄16 17 1.8 0.79 — —
11⁄4 32 45⁄8 117 1
⁄2 13 25⁄16 59 13
⁄16 22 2.0 0.91 — —
1 9 9 7
Showing Hub 1 ⁄2 40 5 127 ⁄16 14 2 ⁄16 65 ⁄8 22 2.3 1.0 2.3 1.0
5
2 50 6 152 ⁄8 16 31⁄16 78 1 25 4.0 1.8 4.0 1.8
1 11 9 1
2 ⁄2 65 7 178 ⁄16 17 3 ⁄16 90 1 ⁄8 29 6.0 2.7 6.0 2.7
3 80 71⁄2 191 3
⁄4 19 41⁄4 108 13⁄16 30 7.6 3.5 7.6 3.5
1 1 13 13 1
3 ⁄2 90 8 ⁄2 216 ⁄16 22 4 ⁄16 124 1 ⁄4 32 9.0 4.1 — —
15
4 100 9 229 ⁄16 24 55⁄16 135 15⁄16 33 12 5.3 12 5.3
Showing Plain Face 15
5 125 10 254 ⁄16 24 67⁄16 164 17⁄16 37 14 6.4 14 6.4
6 150 11 279 1 25 79⁄16 192 19⁄16 40 17 7.5 17 7.5
1 1 11 3
8 200 13 ⁄2 343 1 ⁄8 29 9 ⁄16 246 1 ⁄4 44 26 12 26 12
X
10 250 16 406 13⁄16 30 1115⁄16 303 115⁄16 49 38 17 — —
Q Y
O 12 300 19 483 11⁄4 32 141⁄16 357 23⁄16 56 51 23 — —
3 5 1
14 O.D. 350 O.D. 21 533 1 ⁄8 35 15 ⁄8 397 2 ⁄4 57 80 36 — —
1 7 1 1
16 O.D. 400 O.D. 23 ⁄2 597 1 ⁄16 37 17 ⁄2 445 2 ⁄2 64 100 45 — —
9 5 11
18 O.D. 450 O.D. 25 635 1 ⁄16 40 19 ⁄8 498 2 ⁄16 68 106 48 — —
1 11 3 7
20 O.D. 500 O.D. 27 ⁄2 699 1 ⁄16 43 21 ⁄4 552 2 ⁄8 73 128 58 — —
7 1
24 O.D. 600 O.D. 32 813 1 ⁄8 48 26 660 3 ⁄4 83 202 92 — —
When ordering companion flanges always give outside diameter as well as nominal pipe size.
PF – 107
Iron Flanges
Class 125, Standard
Class 125 (standard) iron flanges are manufactured to American National standard ASME B16.1. Malleable iron flanges are manufactured to ASTM A197.
Pipe Size Dia. of Flange Min. Flange Wall Thick. Weight

Blind Flange I O Thickness Q V Cast Iron
Cast Iron: Figure 1018
1 7 3
10 x 16 (NPS) and smaller 1 25 4 ⁄4 108 ⁄16 11 ⁄8 10 2.0 0.91
1 5 1 7
1 ⁄4 32 4 ⁄8 117 ⁄2 13 ⁄16 11 2.3 1.0
1 9 1
1 ⁄2 40 5 127 ⁄16 14 ⁄2 13 3.8 1.7
5 9
2 50 6 152 ⁄8 16 ⁄16 14 4.0 1.8
1 11 5
V 2 ⁄2 65 7 178 ⁄16 17 ⁄8 16 6.8 3.1
Q
1 3 11
I 3 80 7 ⁄2 191 ⁄4 19 ⁄16 17 8.0 3.6
O 1 1 13 3
3 ⁄2 90 8 ⁄2 216 ⁄16 22 ⁄4 19 11 5.0
12 x 19 (NPS) and larger 4 100 9 229 15
⁄16 24 7
⁄8 22 14 6.4
15 7
5 125 10 254 ⁄16 24 ⁄8 22 18 8.2
15
6 150 11 279 1 25 ⁄16 24 23 10
1 1 1
8 200 13 ⁄2 343 1 ⁄8 29 1 ⁄16 27 40 18
V
3 1
10 250 16 406 1 ⁄16 30 1 ⁄8 29 59 27
Q 12 300 19 483 11⁄4 32 13
⁄16 22 88 40
I 14 O.D. 350 O.D. 21 533 3
1 ⁄8 35 7
⁄8 22 115 52
O 1 7
16 O.D. 400 O.D. 23 ⁄2 597 1 ⁄16 37 1 25 160 73
I
9 1
18 O.D. 450 O.D. 25 635 1 ⁄16 40 1 ⁄16 27 190 86
20 O.D. 500 O.D. 271⁄2 699 111⁄16 43 11⁄8 29 250 113
24 O.D. 600 O.D. 32 17⁄8
813 48 11⁄4 32 370 168
All standard blind flanges sizes 12 NPS (300 DN) (19 inch O.D.(475 DN O.D.)) and larger must be dished with inside radius equal to the port diameter.
When ordering blind flanges always give outside diameter.
H All Class 125 cast iron standard flanges have a flat face.
Flange C.I. Pipe Flange Length Weight

Class 125 cast iron Size
flanges threaded for O.D O.D. Thick thru Hub Faced Not Faced
cast iron pipe Fig. 1010T
3 80 71⁄2 191 3.96 101 3
⁄4 19 13⁄4 44 7.5 3.4 8.0 3.6
15
4 100 9 229 4.80 122 ⁄16 24 115⁄16 49 13 5.9 14 6.3
3
6 150 11 279 6.90 175 1 25 2 ⁄16 56 17 7.8 19 8.4
1 1 7
8 200 13 ⁄2 343 9.05 230 1 ⁄8 29 2 ⁄16 62 29 13 30 14
3 1
10 250 16 406 11.10 282 1 ⁄16 30 2 ⁄2 64 42 19 44 20
Flanges drilled to ASME B16.1
1 13
12 300 19 483 13.20 335 1 ⁄4 32 2 ⁄16 73 60 27 62 28
Class 125 Flanges furnished 14 350 21 533 15.30 389 3
1 ⁄16 30 3 76 74 33 76 34
threaded, drilled and faced. 1 1 1
16 400 23 ⁄2 597 17.40 442 1 ⁄4 32 3 ⁄4 83 102 46 104 47
3 17
18 450 25 635 19.50 495 1 ⁄8 35 3 ⁄32 90 104 47 107 49
1 1 3
20 500 27 ⁄2 699 21.60 549 1 ⁄2 38 3 ⁄4 95 129 59 133 60
24 600 32 813 25.80 655 111⁄16 43 45⁄32 106 178 81 182 82
PF – 108
Iron Flanges
Class 125, Standard
Min. Flange Min. Dia. Min. Length

Reducing Pipe Flange Dia. Weight
Thickness of Hub Thru Hub
Companion Flange Size O Cast Iron
Q X Y
Cast Iron: Figure 1016
15 11
1 25 9
1 ⁄16 49 ⁄16 17 2.8 1.2
5 127 ⁄16 14
11⁄4 32 25⁄16 59 13
⁄16 22 2.5 1.1
1 25 115⁄16 49 11
⁄16 17 5.0 2.3
1 5 5 13
1 ⁄4 32 6 152 ⁄8 16 2 ⁄16 59 ⁄16 22 4.8 2.2
11⁄2 40 29⁄16 65 7
⁄8 22 4.5 2.0
11⁄2 40 29⁄16 65 7
⁄8 22 7.0 3.2
7 178 11⁄16 27
2 50 31⁄16 78 1 25 6.8 3.1
15 13
1 25 1 ⁄16 49 ⁄16 22 9.0 4.1
11⁄2 40 29⁄16 65 7
⁄8 22 8.8 4.0
71⁄2 191 3
⁄4 19
2 50 31⁄16 78 1 25 8.5 3.9
1 9 1
2 ⁄2 65 3 ⁄16 90 1 ⁄8 29 8.0 3.6
X 1 3 1 3
3 80 8 ⁄2 203 1 ⁄16 30 4 ⁄4 108 1 ⁄16 30 10.0 4.5
Q Y
11⁄2 40 29⁄16 65 1 25 15 6.7
O
2 50 31⁄16 78 1 25 14 6.4
1 5 9 1
2 ⁄2 65 9 229 1 ⁄16 33 3 ⁄16 90 1 ⁄8 29 14 6.1
1 3
3 80 4 ⁄4 108 1 ⁄16 30 13 5.8
31⁄2 90 413⁄16 124 11⁄4 32 12 5.4
3 80 41⁄4 108 13⁄16 30 17 7.7
10 254 15⁄16 33 5 5
4 100 5 ⁄16 135 1 ⁄16 33 16 7.3
11⁄2 40 29⁄16 65 11⁄16 27 27 12
To order reducing companion flanges, 2 50 31⁄16 78 11⁄16 27 26 12
specify threaded or reduced size first, 21⁄2 65 39⁄16 90 11⁄8 29 25 11
then the outside diameter of desired 11 279 1 25 1 3
3 80 4 ⁄4 108 1 ⁄16 30 23 10
flange. For instance, if a reducing
flange is required to connect a 5 NPS 4 100 55⁄16 135 15⁄16 33 21 10
(125 DN) pipe to an 8 NPS (200 DN) 5 125 67⁄16 164 17⁄16 37 19 8.6
valve or fitting having a 13 1⁄ 2 inch
2 50 31⁄16 78 13⁄16 30 44 20
(338 DN) O.D. flange, order 5 NPS x
1 3
13 1⁄ 2 inch (125 x 338 DN) reducing 3 80 4 ⁄4 108 1 ⁄16 30 40 18
flange. 4 100 131⁄2 343 11⁄8 29 55⁄16 135 15⁄16 33 37 17
5 125 67⁄16 164 17⁄16 37 34 15
∆Stock galvanized 9 9
6 150 7 ⁄16 192 1 ⁄16 40 31 14
9 9
6 150 7 ⁄16 192 1 ⁄16 40 53 24
16 406 13⁄16 30
8 200 911⁄16 246 13⁄4 44 50 23
6 150 79⁄16 192 19⁄16 40 88 40
1 11 3
8 200 19 483 1 ⁄4 32 9 ⁄16 246 1 ⁄4 44 81 37
10 250 1115⁄16 303 115⁄16 49 72 33
PF – 109
Iron Flanges
Class 250 (extra heavy) iron flanges are manufactured to American National standard: dimensions, ASME B16.1; threads ASME B1.20.1
Min. Min. Min

Flange Min. Hub Diam of
Pipe Flange Length Length Weight
Companion Flange Diameter Diameter Raised
Size Thickness Through of Threads Cast Iron
Cast Iron: Figure 1025 O x Face W (in)
Q Hub - Y T
1 1 3 1 1
1 ⁄4 32 5 ⁄4 133 ⁄4 19 2 ⁄2 64 1 25 0.76 19 3 ⁄16 78 3.8 1.7
11⁄2 40 61⁄8 156 13
⁄16 22 23⁄4 70 11⁄8 29 0.87 22 39⁄16 90 5.8 2.6
2 50 61⁄2 165 7
⁄8 22 35⁄16 84 11⁄4 32 1.00 25 43⁄16 106 6.5 2.9
21⁄2 65 71⁄2 191 1 25 315⁄16 100 17⁄16 37 1.14 29 415⁄16 125 9.5 4.3
3 80 81⁄4 210 11⁄8 29 45⁄8 117 19⁄16 40 1.20 30 511⁄16 144 12 5.6
X
31⁄2 90 9 229 13⁄16 30 51⁄4 133 15⁄8 41 1.25 32 65⁄16 160 16 7.3
T Q Y 1 3 3 15
4 100 10 254 1 ⁄4 32 5 ⁄4 146 1 ⁄4 44 1.30 33 6 ⁄16 176 20 9.1
W
O 5 125 11 279 13⁄8 35 7 178 17⁄8 48 1.41 36 85⁄16 211 24 11
6 150 121⁄2 318 17⁄16 37 81⁄8 206 115⁄16 49 1.51 38 911⁄16 246 32 15
8 200 15 381 15⁄8 41 101⁄4 260 23⁄16 56 1.71 43 1115⁄16 303 51 23
10 250 171⁄2 445 17⁄8 48 125⁄8 321 23⁄8 60 1.92 49 141⁄16 357 77 35
12 300 201⁄2 521 2 51 143⁄4 375 29⁄16 65 2.12 54 167⁄16 418 103 47
Min. Length Diam of

Flange Min Flange Min Length
Reducing Companion Flange Pipe Through Raised Weight Cast
Diam. Thickness of Threads
Cast Iron Size Hub Face Iron
O Q T
Figure 1030 Y W
1 1 1 11
2 50 8 ⁄4 210 1 ⁄8 29 1 ⁄4 32 1.00 25 5 ⁄16 144 14 6.5
21⁄2 65 81⁄4 210 11⁄8 29 17⁄16 37 1.14 29 511⁄16 144 14 6.1
3 80 10 254 11⁄4 32 19⁄16 40 1.20 30 615⁄16 176 23 10
X 4 100 11 279 13⁄8 35 13⁄4 44 1.30 33 85⁄16 211 30 14
T Q Y 4 100 121⁄2 318 17⁄16 37 13⁄4 44 1.30 33 911⁄16 246 40 18

W 5 125 121⁄2 318 17⁄16 37 17⁄8 48 1.41 36 911⁄16 246 36 16
O
6 150 15 381 15⁄8 41 115⁄16 49 1.51 38 1115⁄16 303 59 27
Flange Dia. of Min. Flange Min. Metal

Blind Flange Pipe Weight
Dia. Port Thickness Thickness
Cast Iron Size Cast Iron
O I Q V
Figure 1021
7 11
1 25 4 ⁄8 124 1 25 ⁄16 17 – – 4.0 1.8
8 x 15 and smaller
1 1 1 13
(200 x 375 DN) 1 ⁄2 40 6 ⁄8 156 1 ⁄2 38 ⁄16 22 – – 525 238
1 7
2 50 6 ⁄2 165 2 51 ⁄8 22 – – 7.0 3.2
Q
21⁄2 65 71⁄2 191 21⁄2 64 1 25 – – 11 5.0
I
W 3 80 81⁄4 210 3 76 11⁄8 29 – – 14 6.4
O
1 1 3
V 3 ⁄2 90 9 229 3 ⁄2 89 1 ⁄16 30 – – 19 8.6
1
Q 4 100 10 254 4 102 1 ⁄4 32 – – 23 10
3
I 5 125 11 279 5 127 1 ⁄8 35 – – 31 14
W
O 6 150 121⁄2 318 6 152 17⁄16 37 – – 42 19
I
5
8 200 15 381 8 203 1 ⁄8 41 – – 70 32
10 x 171⁄2 and larger 10 250 1
17 ⁄2 445 10 254 7
1 ⁄8 48 15
⁄16 24 104 47
(250 x 440 DN)
12 300 201⁄2 521 12 305 2 51 1 25 145 66
PF – 110
Miscellaneous
All Purpose Gaskets
Full Face Ring
Compressed Sheet Packing is a single-formula material suitable for a wide range of temperature-pressure combinations.
It is used for sealing water, steam, all oils, gases, alkalies, acids, refrigerants and hydrocarbons.
Available in eight gauges: 1⁄ 100, 1⁄ 64, 1⁄ 32, 1⁄ 16, 3⁄ 32, 1⁄ 8, 3⁄ 16, and 1⁄ 4 inch (.2, .4, .8, 1.6, 3.1, 4.7 and 6.3mm).
Hex Head Bolts When ordering, specify bolt size and length required.
Bolts are furnished in sizes 1⁄ 4", 5⁄ 16", 3⁄ 8", 7⁄ 16", 1", 1 1⁄ 8 ", 1 1⁄ 4 ",
(6.3, 7.9, 9.5, 11, 25, 29 and 32 mm) in varying lengths.
Lengths of bolts are measured from under head to extreme point.
PF – 111
Templates • Bolts
Bolt Template for Drilling Flanged Fittings

Min. Ring Ring
Pipe Flange Bolt Circle Bolt Hole Dia. Length of
Flange No of Gasket Gasket
Size Dia. Dia. Dia. of Bolt Bolt
Thickness bolts I.D. O.D.
NPS DN in mm in mm in mm in mm in mm in mm in mm in mm
3
⁄4 20 37⁄8 98 7
⁄16 11 23⁄4 70 4 5
⁄8 16 1
⁄2 13 13⁄4 44 11⁄16 27 21⁄4 57
1 25 41⁄4 108 7
⁄16 11 31⁄8 79 4 5
⁄8 16 1
⁄2 13 13⁄4 44 15⁄16 33 25⁄8 67
11⁄4 32 45⁄8 117 1

⁄2 13 31⁄2 89 4 5
⁄8 16 1
⁄2 13 2 51 121⁄32 42 3 76
1 9 7 5 1 29 3
1 ⁄2 40 5 127 ⁄16 14 3 ⁄8 98 4 ⁄8 16 ⁄2 13 2 51 1 ⁄32 48 3 ⁄8 86
5 3 3 5 1 3 1
2 50 6 152 ⁄8 16 4 ⁄4 121 4 ⁄4 19 ⁄8 16 2 ⁄4 57 2 ⁄8 60 4 ⁄8 105
1 11 1 3 5 1 7 7
2 ⁄2 65 7 178 ⁄16 17 5 ⁄2 140 4 ⁄4 19 ⁄8 16 2 ⁄2 64 2 ⁄8 73 4 ⁄8 124
1 3 3 5 1 1 3
3 80 7 ⁄2 191 ⁄4 19 6 152 4 ⁄4 19 ⁄8 16 2 ⁄2 64 3 ⁄2 89 5 ⁄8 137
1 1 13 3 5 3 3
3 ⁄2 90 8 ⁄2 216 ⁄16 22 7 178 8 ⁄4 19 ⁄8 16 2 ⁄4 70 4 102 6 ⁄8 162
15 1 3 5 1 7
4 100 9 229 ⁄16 24 7 ⁄2 191 8 ⁄4 19 ⁄8 16 3 76 4 ⁄2 114 6 ⁄8 175
15 1 7 3 9 3
5 125 10 254 ⁄16 24 8 ⁄2 216 8 ⁄8 22 ⁄4 19 3 76 5 ⁄16 141 7 ⁄4 197
1 7 3 1 5 3
6 150 11 279 1 25 9 ⁄2 241 8 ⁄8 22 ⁄4 19 3 ⁄4 83 6 ⁄8 168 8 ⁄4 222
1 1 3 7 3 1 5
8 200 13 ⁄2 343 1 ⁄8 29 11 ⁄4 298 8 ⁄8 22 ⁄4 19 3 ⁄2 89 8 ⁄8 219 11 279
3 1 7 3 3 3
10 250 16 406 1 ⁄16 30 14 ⁄4 362 12 1 25 ⁄8 22 3 ⁄4 95 10 ⁄4 273 13 ⁄8 340
1 7 3 3 1
12 300 19 483 1 ⁄4 32 17 432 12 1 25 ⁄8 22 3 ⁄4 95 12 ⁄4 324 16 ⁄8 410
3 3 1 1 3
14 O.D. 350 O.D. 21 533 1 ⁄8 35 18 ⁄4 476 12 1 ⁄8 29 1 25 4 ⁄4 108 14 356 17 ⁄4 451
1 7 1 1 1 1
16 O.D. 400 O.D. 23 ⁄2 597 1 ⁄16 37 21 ⁄4 540 16 1 ⁄8 29 1 25 4 ⁄2 114 16 406 20 ⁄4 514
9 3 1 1 3 5
18 O.D. 450 O.D. 25 635 1 ⁄16 40 22 ⁄4 578 16 1 ⁄4 32 1 ⁄8 29 4 ⁄4 121 18 457 21 ⁄8 549
1 11 1 1 7
20 O.D. 500 O.D. 27 ⁄2 699 1 ⁄16 43 25 635 20 1 ⁄4 32 1 ⁄8 29 5 127 20 508 23 ⁄8 606
7 1 3 1 1 1
24 O.D. 600 O.D. 32 813 1 ⁄8 48 29 ⁄2 749 20 1 ⁄8 35 1 ⁄4 32 5 ⁄2 140 610 610 28 ⁄4 718
Drilling templates are in multiples of four, so that fittings may be made to face in any quarter.
Bolt holes straddle the center line.
PF – 112
Templates • Bolts
Bolt Template for Drilling Extra Heavy Flanged Fittings

Min. Dia. of Ring
Pipe Flange Bolt Circle Dia. of Bolt Bolt Gasket
Flange Raised No of Bolt Holes Gasket
Size Dia. Dia. Dia. Length I.D.
Thickness Face bolts O.D.
NPS DN in mm in mm in mm in mm in mm in mm in mm in mm in mm
1 25 47⁄8 124 11
⁄16 17 211⁄16 68 31⁄2 89 4 3
⁄4 19 5
⁄8 16 21⁄2 64 15⁄16 33 2 7⁄8 51
11⁄4 32 51⁄4 133 3

⁄4 19 31⁄16 78 37⁄8 98 4 3
⁄4 19 5
⁄8 16 21⁄2 64 121⁄32 42 31⁄4 83
11⁄2 40 61⁄8 156 13

⁄16 22 39⁄16 90 41⁄2 114 4 7
⁄8 22 3
⁄4 19 23⁄4 70 129⁄32 48 33⁄4 95
1 7 3 3 5 3 3 3
2 50 6 ⁄2 165 ⁄8 22 4 ⁄16 106 5 127 8 ⁄4 19 ⁄8 16 2 ⁄4 70 2 ⁄8 60 4 ⁄8 111
1 1 15 7 7 3 1 7 1
2 ⁄2 65 7 ⁄2 191 1 25 4 ⁄16 125 5 ⁄8 149 8 ⁄8 22 ⁄4 19 3 ⁄4 83 2 ⁄8 73 5 ⁄8 130
1 1 11 5 7 3 1 1 7
3 80 8 ⁄4 210 1 ⁄8 29 5 ⁄16 144 6 ⁄8 168 8 ⁄8 22 ⁄4 19 3 ⁄2 89 3 ⁄2 89 5 ⁄8 149
1 3 5 1 7 3 1 1
3 ⁄2 90 9 229 1 ⁄16 30 6 ⁄16 160 7 ⁄4 184 8 ⁄8 22 ⁄4 19 3 ⁄2 89 4 102 6 ⁄2 165
1 15 7 7 3 3 1 1
4 100 10 254 1 ⁄4 32 6 ⁄16 176 7 ⁄8 200 8 ⁄8 22 ⁄4 19 3 ⁄4 95 4 ⁄2 114 7 ⁄8 181
3 5 1 7 3 9 1
5 125 11 279 1 ⁄8 35 8 ⁄16 211 9 ⁄4 235 8 ⁄8 22 ⁄4 19 4 102 5 ⁄16 141 8 ⁄2 216
1 7 11 5 7 3 5 7
6 150 12 ⁄2 318 1 ⁄16 37 9 ⁄16 246 10 ⁄8 270 12 ⁄8 22 ⁄4 19 4 102 6 ⁄8 168 9 ⁄8 251
5 15 7 1 5 1
8 200 15 381 1 ⁄8 41 11 ⁄16 303 13 330 12 1 25 ⁄8 22 4 ⁄2 114 8 ⁄8 219 12 ⁄8 308
1 7 1 1 1 1 3 1
10 250 17 ⁄2 445 1 ⁄8 48 14 ⁄16 357 15 ⁄4 387 16 1 ⁄8 29 1 25 5 ⁄4 133 10 ⁄4 273 14 ⁄4 362
1 7 3 1 1 1 3 5
12 300 20 ⁄2 521 2 51 16 ⁄16 418 17 ⁄4 451 16 1 ⁄4 32 1 ⁄8 29 5 ⁄2 140 12 ⁄4 324 16 ⁄8 422
Drilling templates are in multiples of four, so that fittings may be made to face in any quarter.
Bolt holes straddle the center line.
PF – 113
Floor and Ceiling Plates
Stamped Steel for Copper Tube Outside

Size Weight/Doz.
Figure 1 (with Springs) Dia.
Figure 2 (with Set Screw) NPS Dn in mm lbs kg
1
⁄4 8 21⁄8 54 0.88 0.40
3
⁄8 10 21⁄8 54 0.69 0.31
1
⁄2 15 27⁄16 62 0.81 0.37
3
⁄4 20 221⁄32 67 0.94 0.43
1 25 227⁄32 72 1.1 0.48
11⁄4 32 39⁄32 83 1.4 0.63
11⁄2 40 35⁄8 92 1.6 0.74
2 50 43⁄16 106 2.1 1.0
21⁄2 65 47⁄8 124 2.8 1.2
3 80 53⁄16 132 2.8 1.3
1
3 ⁄2 90 — — — —
4 100 — — — —
5 125 — — — —
6 150 — — — —
Stamped Steel for Pipe Outside

Size Weight/Doz.
Figure 10 (with Springs) Dia.
Figure 13 (with Set Screw) NPS DN in mm lbs kg
1 3
⁄4 8 2 ⁄16 56 0.69 0.31
3
⁄8 10 21⁄2 64 0.81 0.37
1
⁄2 15 25⁄8 67 0.94 0.43
3
⁄4 20 227⁄32 72 1.00 0.45
1 25 39⁄32 83 1.4 0.63
11⁄4 32 35⁄8 92 1.6 0.74
11⁄2 40 315⁄16 100 1.7 0.77
2 50 43⁄8 111 2.3 1.0
21⁄2 65 57/32 133 2.9 1.3
3 80 529⁄32 150 3.4 1.5
31⁄2 90 69⁄16 167 4.0 1.8
4 100 73⁄16 183 4.6 2.1
5 125 87⁄8 225 9.0 4.1
6 150 10 254 11 4.8
Stamped Steel for Pipe Outside

Size Weight/Doz.
Figure 20 Dia.
(with Springs and
Exposed Rivet Hinge) NPS DN in mm lbs kg
1
⁄4 8 — — — —
3
⁄8 10 21⁄2 64 0.88 0.40
1
⁄2 15 25⁄8 67 0.88 0.40
3
⁄4 20 227⁄32 72 0.94 0.43
1 25 39⁄32 83 1.3 0.57
11⁄4 32 35⁄8 92 1.4 0.63
11⁄2 40 315⁄16 100 1.6 0.74
2 50 49⁄16 116 2.3 1.0
21⁄2 65 51⁄4 133 2.8 1.3
3 80 57⁄8 149 3.3 1.5
31⁄2 90 69⁄16 167 4.1 1.8
3
4 100 7 ⁄16 183 4.4 2.0
5 125 — — — —
6 150 — — — —
PF – 114
General Information
Standard Malleable Iron Fittings

Cartons .................................................................. pf-116 to pf-121
Palleted .................................................................. pf-122 to pf-134
Cast Iron Fittings
Palleted ..................................................................pf-135 to pf-137
Steel Pipe Nipples
Cartons .................................................................................. pf-138
“25 packs” Standard/Sch. 40 ............................... pf-139 to pf-142
“25 packs” XS/Sch. 80 .......................................... pf-143 to pf-146
Nipple Assortments.............................................................. pf-147
PF – 115
Cartons
(black or galvanized)
Master Containers Cartons Master Containers Cartons
Size Size
Weight. No. ▲Wt. Sold No.
Weight. No.
No
▲Wt. Sold
No. No Bags/ Box
Bags/ Box Pcs Pcs
(NPS) DN Pcs Lbs kg Cartons Pcs Lbs kg (NPS) DN Lbs kg Cartons Lbs kg Only
Only
90° Elbow: Fig. 1101 (Pg. pf-58) 45° Elbow: Fig. 1102 (Pg. pf-58)
1
1
⁄8 6 105 6.0 2.7 3 35 2.1 1.0 ⁄8 6 150 11 5.0 3 50 3.5 1.6
1
1
⁄4 8 75 8.0 3.6 3 25 2.8 1.3 ❏ blk ⁄4 8 70 8.0 3.6 2 35 3.9 1.8
3
3
⁄8 10 40 7.0 3.2 2 20 3.4 1.5 ❏ ⁄8 10 40 6.0 2.7 2 20 3.2 1.5
1
⁄2 15 200 60 27 4 50 15 6.8 ❏
1
⁄2 15 300 66 30 4 75 17 7.5 ❏ blk
3
⁄4 20 140 63 29 4 35 16 7.2 ❏
3
⁄4 20 160 59 27 4 40 15 6.7 ❏ blk
1 25 80 58 26 4 20 15 6.6 ❏ 1 25 100 54 24 4 25 14 6.1 ❏
11⁄4 32 48 47 21 4 12 12 5.3 ❏ 11⁄4 32 60 52 24 4 15 13 5.9 ❏ blk
1 ⁄21
40 32 42 19 4 8 10 4.7 ❏ 11⁄2 40 32 36 16 4 8 9.0 4.1 ❏
2 50 20 41 19 2 10 21 9 ❏ 2 50 24 43 20 4 6 11 4.9 ❏
21⁄2 65 10 37 17 2 5 18 8.3 ❏ 21⁄2 65 10 28 13 2 5 14 6.3 ❏ blk
3 80 8 44 20 2 4 22 10 ❏ 3 80 8 36 16 2 4 18 8.1 ❏
31⁄2 90 6 43 20 2 3 21 10 4 100 4 30 14 - - - - ❏
4 100 5 43 20 - - - - ❏ 90° Street Elbow: Fig. 1103 (Pg. pf-60)
90° Reducing Elbow: Fig. 1101R (Pg. pf-59) 1
⁄8 6 120 7.0 3.2 3 40 2.4 1.1 ❏ blk
1
⁄4 x 1⁄8 8x6 100 10.0 4.5 2 50 5.0 2.3
1
⁄4 8 90 9.0 4.1 3 30 3.0 1.4 ❏
3
⁄8 x 1⁄8 10 x 6 75 7.0 3.2 2 25 3.5 1.6
3
⁄8 10 40 7.0 3.2 2 20 3.4 1.5 ❏
3
⁄8 x 1⁄4 10 x 8 50 9.0 4.1 3 25 3.0 1.4
1
⁄2 15 300 84 38 4 75 21 10 ❏
1
⁄2 x 1⁄4 15 x 8 30 6.0 2.7 2 15 2.9 1.3
3
⁄4 20 160 66 30 4 40 16 7.4 ❏
1
⁄2 x 3⁄8 15 x 10 300 66 30 4 75 17 7.5 1 25 60 37 17 4 15 9.3 4.2 ❏
3
⁄4 x ⁄4 1
20 x 8 24 6.0 2.7 2 12 3.1 1.4 11⁄4 32 40 44 20 4 10 11 4.9 ❏ blk
3
⁄4 x 3⁄8 20 x 10 160 46 21 8 20 5.8 2.6 11⁄2 40 32 46 21 4 8 12 5.2 ❏
3 1
20 x 15 180 68 31 4 45 17 7.8 ❏ blk 2 50 20 57 26 2 10 29 13 ❏
⁄4 x ⁄2
21⁄2 65 8 32 15 2 4 16 7.3 ❏ blk
1 x 3⁄8 25 x 10 120 49 22 8 15 6.2 2.8
3 80 4 24 11 - - - - ❏ blk
1 x 1⁄2 25 x 15 100 46 21 4 25 12 5.2 ❏
4 100 4 42 19 - - - -
1 x ⁄4 3
25 x 20 80 45 20 4 20 11 5.1 ❏
1
1 ⁄4 x ⁄2 1
32 x 15 80 49 22 4 20 12 5.5 90° Street Elbow, Reducing: Fig. 1103R (Pg. pf-60)
1
1
1 ⁄4 x ⁄4 3
32 x 20 60 43 20 4 15 11 4.9 ❏ ⁄2 X 3⁄8 15 x 10 280 64 29 8 35 8.1 3.7
1
1 ⁄4 x 1 32 x 25 60 52 24 4 15 13 5.9 ❏
3
⁄4 X 1⁄2 20 x 15 200 64 29 8 25 8.0 3.6 ❏ blk
1
1 ⁄2 x ⁄4 3
40 x 20 48 40 18 4 12 10.0 4.5 1 X 3⁄4 25 x 20 100 54 24 4 25 14 6.1
1
1 ⁄2 x 1 40 x 25 48 49 22 4 12 12 5.5 11⁄4 X 3⁄4 32 x 20 60 45 20 4 15 11 5.1
1
1 ⁄2 x 1 ⁄4 1
40 x 32 32 37 17 4 8 9.4 4.3 ❏ blk 11⁄4 X 1 32 x 25 60 52 24 4 15 13 5.9
2 x ⁄4 3
50 x 20 24 31 14 4 6 7.8 3.5 11⁄2 X 1 40 x 25 40 43 20 4 10 11 4.9
2x1 50 x 25 30 41 19 2 15 20 9 11⁄2 X 11⁄4 40 x 32 40 47 21 2 20 24 11
2 x 11⁄4 50 x 32 24 37 17 2 12 18 8.3 2 X 11⁄2 50 x 40 24 44 20 2 12 22 10
2 x 1 ⁄2 1
50 x 40 24 42 19 2 12 21 10 ❏ blk 45° Street Elbow: Fig. 1104 (Pg. pf-59)
21⁄2 X 11⁄2 65 x 40 12 30 14 2 6 15 6.9 1
⁄8 6 150 9.0 4.1 3 50 3.0 1.4
21⁄2 X 2 65 x 50 10 30 14 2 5 15 6.8 1
⁄4 8 100 10.0 4.5 2 50 5.0 2.3
3X2 80 x 50 8 30 14 2 4 15 6.8 3
⁄8 10 50 7.0 3.2 2 25 3.5 1.6
3 X 21⁄2 80 x 65 8 34 15 2 4 17 7.8 1
15 300 60 27 4 75 15 6.8
⁄2
4X3 100 x 80 4 31 31 2 2 16 7.1 3
⁄4 20 160 53 24 4 40 13 6.0
1 25 100 52 24 4 25 13 5.9
11⁄4 32 60 51 23 4 15 13 5.8
11⁄2 40 40 49 22 4 10 12 5.5
2 50 24 46 21 2 12 23 10
▲Weights shown are for black; † Black only; ■ Galvanized Only

❏ blk - Sold in box only for Black finish, ❏ gal - Sold in box only for Galvanized finish, ❏ - Sold in box only for both finish
PF – 116
Cartons
(black or galvanized) (cont.)
Size Size
No.
Weight. No.
No
▲Wt. Sold
No.
Weight. No.
No
▲Wt. Sold
Bags/ Box Bags/ Box
(NPS) DN Pcs Lbs kg Cartons Pcs Lbs kg (NPS) DN Pcs Lbs kg Cartons Pcs Lbs kg
Only Only
Tee: Fig. 1105 (Pg. pf-60) Tee, Reducing: Fig. 1105R (Continued)
1
⁄8 6 75 7.0 3.2 3 25 2.3 1.0 ❏ blk 1 X 1 X ⁄4 1
25 x 25 x 8 80 42 19 4 20 11 4.8
1
⁄4 8 40 6.0 2.7 2 20 3.0 1.4 ❏ 1 X 1 X 3⁄8 25 x 25 x 10 80 48 22 4 20 12 5.4
3
⁄8 10 30 7.0 3.2 2 15 3.5 1.6 ❏ blk 1 X 1 X 1⁄2 25 x 25 x 15 60 42 19 4 15 11 4.8 ❏
1
⁄2 15 160 66 30 4 40 16 7.4 ❏ 1 X 1 X 3⁄4 25 x 25 x 20 60 49 22 4 15 12 5.6 ❏ blk
3
⁄4 20 80 54 24 4 20 13 6.1 ❏ 1 X 1 X 11⁄4 25 x 25 x 32 40 37 17 4 10 9.2 4.2
1 25 48 43 20 4 12 11 4.9 ❏ 1 X 1 X 11⁄2 25 x 25 x 40 32 38 17 4 8 9.5 4.3
1
1 ⁄4 32 32 42 19 4 8 11 4.8 ❏ 1X1X2 25 x 25 x 50 24 39 18 2 12 20 8.9
11⁄2 40 20 35 16 4 5 8.7 3.9 ❏ 11⁄4 X 1⁄2 X 1 32 x 15 x 25 40 35 16 4 10 8.7 3.9
2 50 20 50 23 2 10 25 11 ❏ 11⁄4 X 1⁄2 X 11⁄4 32 x 15 x 32 24 25 11 4 6 6.2 2.8
21⁄2 65 8 39 18 2 4 20 8.9 ❏ 1 3
1 ⁄4 X ⁄4 X ⁄4 3
32 x 20 x 20 40 34 15 4 10 8.6 3.9
3 80 6 42 19 2 3 21 10 ❏ 1
1 ⁄4 X ⁄4 X 1 3
32 x 20 x 25 40 36 16 4 10 9.1 4.1
31⁄2† 90 4 36 16 - - - - 1 3
1 ⁄4 X ⁄4 X 1 ⁄4 1
32 x 20 x 32 24 25 11 4 6 6.2 2.8
4 100 4 45 20 - - - - 1
1 ⁄4 X 1 X ⁄2 1
32 x 25 x 15 60 46 21 4 15 11 5.2 ❏ blk
Tee, Reducing: Fig. 1105R (Pg. pf-61) 1
1 ⁄4 X 1 X ⁄4 3
32 x 25 x 20 40 35 16 4 10 8.7 3.9 ❏ blk
1
⁄8 X 1⁄8 X 1⁄4 6x6x8 50 6.0 2.7 2 25 3.0 1.4 11⁄4 X 1 X 1 32 x 25 x 25 40 44 20 4 10 11 5.0 ❏ blk
1
⁄4 X 1⁄4 X 1⁄8 8x8x6 50 7.0 3.2 2 25 3.3 1.5 11⁄4 X 1 X 11⁄4 32 x 25 x 32 24 27 12 4 6 6.8 3.1
1
⁄4 X 1⁄4 X 3⁄8 8 x 8 x 10 30 6.0 2.7 2 15 2.9 1.3 11⁄4 X 11⁄4 X 3⁄8 32 x 32 x 10 40 34 15 4 10 8.6 3.9
3 1
⁄8 X ⁄4 X ⁄4 1
10 x 8 x 8 30 6.0 2.7 2 15 2.9 1.3 11⁄4 X 11⁄4 X 1⁄2 32 x 32 x 15 40 39 18 4 10 9.8 4.4 ❏ blk
3
⁄8 X 1⁄4 X 3⁄8 10 x 8 x 10 30 6.0 2.7 2 15 3.2 1.5 11⁄4 X 11⁄4 X 3⁄4 32 x 32 x 20 32 34 15 4 8 8.6 3.9 ❏ blk
3
⁄8 X 3⁄8 X 1⁄4 10 x 10 x 8 30 6.0 2.7 2 15 3.2 1.5 11⁄4 X 11⁄4 X 1 32 x 32 x 25 40 47 21 2 20 24 11 ❏
3
⁄8 X 3⁄8 X 1⁄2 10 x 10 x 15 20 5.0 2.3 2 10 2.7 1.2 11⁄4 X 11⁄4 X 11⁄2 32 x 32 x 40 30 44 20 2 15 22 10
1
⁄2 X 1⁄4 X 1⁄2 15 x 8 x 15 20 6.0 2.7 2 10 2.9 1.3 11⁄4 X 11⁄4 X 2 32 x 32 x 50 24 41 19 2 12 20 9
1 3
⁄2 X ⁄8 X ⁄8 3
15 x 10 x 10 20 6.0 2.7 2 10 2.8 1.3 11⁄2 X 1⁄2 X 11⁄2 40 x 15 x 40 30 40 18 2 15 20 9.1
1
⁄2 X 3⁄8 X 1⁄2 15 x 10 x 15 20 7.0 3.2 2 10 3.3 1.5 11⁄2 X 3⁄4 X 3⁄4 40 x 20 x 20 40 40 18 4 10 10.0 4.5
1 1
⁄2 X ⁄2 X ⁄4 1
15 x 15 x 8 20 5.0 2.3 2 10 2.7 1.2 11⁄2 X 3⁄4 X 11⁄2 40 x 20 x 40 30 42 19 2 15 21 10
1
⁄2 X 1⁄2 X 3⁄8 15 x 15 x 10 200 60 27 8 25 7.5 3.4 11⁄2 X 1 X 1 40 x 25 x 25 32 36 16 4 8 9.1 4.1
1
⁄2 X 1⁄2 X 3⁄4 15 x 15 x 20 120 54 24 4 30 14 6.1 11⁄2 X 1 X 11⁄4 40 x 25 x 32 30 39 18 2 15 20 8.8
1 1
⁄2 X ⁄2 X 1 15 x 15 x 25 100 55 25 4 25 14 6.3 11⁄2 X 1 X 11⁄2 40 x 25 x 40 30 45 20 2 15 23 10
3
⁄4 X 1⁄4 X 3⁄4 20 x 8 x 20 120 54 24 4 30 14 6.1 11⁄2 X 11⁄4 X 1⁄2 40 x 32 x 15 40 42 19 4 10 11 4.8
3
⁄4 X 3⁄8 X 3⁄8 † 20 x 10 x 10 140 50 23 4 35 13 5.7 11⁄2 X 11⁄4 X 3⁄4 40 x 32 x 20 32 35 16 4 8 8.6 3.9
3 3
⁄4 X ⁄8 X ⁄4 3
20 x 10 x 20 100 46 21 4 25 12 5.2 11⁄2 X 11⁄4 X 1 40 x 32 x 25 32 40 18 4 8 10 4.6
3
⁄4 X 1⁄2 X 1⁄2 20 x 15 x 15 140 60 27 4 35 15 6.8 ❏ blk 11⁄2 X 11⁄4 X 11⁄4 40 x 32 x 32 24 36 16 2 12 18 8.3
3
⁄4 X 1⁄2 X 3⁄4 20 x 15 x 20 80 42 19 4 20 10 4.7 ❏ blk 11⁄2 X 11⁄4 X 11⁄2 40 x 32 x 40 24 36 16 2 12 18 8.2
3
⁄4 X 3⁄4 X 1⁄4 20 x 20 x 8 140 53 24 4 35 13 6.0 11⁄2 X 11⁄2 X 1⁄2 40 x 40 x 15 32 38 17 4 8 9.5 4.3 ❏
3
⁄4 X 3⁄4 X 3⁄8 20 x 20 x 10 120 50 23 4 30 13 5.7 11⁄2 X 11⁄2 X 3⁄4 40 x 40 x 20 24 32 15 4 6 7.9 3.6 ❏
3 3
⁄4 X ⁄4 X ⁄2 1
20 x 20 x 15 80 38 17 4 20 9.4 4.3 ❏ blk 11⁄2 X 11⁄2 X 1 40 x 40 x 25 24 35 16 4 6 8.7 3.9 ❏
3
⁄4 X 3⁄4 X 1 20 x 20 x 25 60 37 17 4 15 9.3 4.2 11⁄ 2 X 11⁄ 2 X 11⁄ 4 40 x 40 x 32 24 35 16 4 6 8.7 3.9
3
⁄4 X 3⁄4 X 11⁄4 20 x 20 x 32 40 36 16 4 10 9.0 4.1 11⁄2 X 11⁄2 X 2 40 x 40 x 50 24 45 20 2 12 22 10
1 X 1⁄4 X 1 25 x 8 x 25 60 41 19 4 15 10 4.7 2 X 1⁄2 X 2 50 x 15 x 50 20 43 20 2 10 22 10
1 X 1⁄2 X 1⁄2 25 x 15 x 15 100 55 25 4 25 14 6.3 ❏ blk 2 X 3⁄4 X 2 50 x 20 x 50 20 40 18 2 10 20 9.1
1 X 1⁄2 X 3⁄4 25 x 15 x 20 80 45 20 4 20 11 5.1 ❏ blk 2X1X2 50 x 25 x 50 20 43 20 2 10 21 10
1 X 1⁄2 X 1 25 x 15 x 25 60 46 21 4 15 11 5.2 ❏ blk 2 X 11⁄4 X 11⁄4 50 x 32 x 32 20 34 15 2 10 17 7.8
1 X 3⁄4 X 1⁄2 25 x 20 x 15 80 47 21 4 20 12 5.4 ❏ blk 2 X 11⁄4 X 11⁄2 50 x 32 x 40 20 37 17 2 10 19 8.4
1 X 3⁄4 X 3⁄4 25 x 20 x 20 60 44 20 4 15 11 5.0 ❏ blk 2 X 11⁄4 X 2 50 x 32 x 50 20 44 20 2 10 22 10
1 X 3⁄4 X 1 25 x 20 x 25 60 47 21 4 15 12 5.3 ❏ blk

PF – 117
Cartons
Size Size
No.
Weight. No.
No
▲Wt. Sold
No.
Weight. No.
No
▲Wt. Sold
Bags/ Box Bags/ Box
Only Only
Tee, Reducing: Fig. 1105R (Continued) Cross: Fig. 1107 (Pg. pf-65)
1 1
2 X 1 ⁄2 X 1 50 x 40 x 25 24 38 17 2 12 19 8.5 ⁄8 6 50 6.0 2.7 2 25 3.0 1.4
2 X 11⁄ 2 X 11⁄ 4 50 x 40 x 32 20 35 16 2 10 18 8.0 1
⁄4 8 30 5.0 2.3 2 15 2.7 1.2
2 X 11⁄ 2 X 11⁄ 2 50 x 40 x 40 20 39 18 2 10 20 8.8 3
⁄8 10 160 45 20 8 20 5.6 2.5
2 X 11⁄ 2 X 2 50 x 40 x 50 16 36 16 2 8 18 8.1 1
⁄2 15 120 50 23 4 30 13 5.7 ❏ blk
2 X 2 X 1⁄ 2 50 x 50 x 15 30 50 23 2 15 25 11 ❏ 3
⁄4 20 60 41 19 4 15 10 4.7
2 X 2 X 3⁄ 4 50 x 50 x 20 24 45 20 2 12 22 10 ❏ 1 25 40 45 20 4 10 11 5.1 ❏ blk
2X2X1 50 x 50 x 25 24 42 19 2 12 21 10 ❏ 11⁄4 32 30 43 20 2 15 22 10
2 X 2 X 1 ⁄4 1
50 x 50 x 32 20 47 21 2 10 24 11 ❏ blk 11⁄2 40 20 40 18 2 10 20 9.0
2 X 2 X 1 ⁄2 1
50 x 50 x 40 20 51 23 2 10 26 12 ❏ blk 2 50 16 53 24 2 8 26 12 ❏ blk
2 X 2 X 21⁄ 2 50 x 50 x 65 12 42 19 2 6 21 10 21⁄2 65 8 41 19 2 4 21 9
1
2 ⁄2 X 1 ⁄2 X 2 1
65 x 40 x 50 12 41 19 2 6 21 9 3 80 4 32 15 – 0 – –
21⁄ 2 X 11⁄ 2 X 21⁄ 2 65 x 40 x 65 12 46 21 2 6 23 10 4■ 100 0 0 0 – 4 - –
1
2 ⁄2 X 2 X 2 65 x 50 x 50 12 39 18 2 6 20 8.9 Y Branch: Fig. 1108 (Pg. pf-64)
21⁄ 2 X 2 X 21⁄ 2 65 x 50 x 65 8 32 15 2 4 16 7.3 3
⁄8 10 24 6.0 2.7 2 12 3.2 1.5
21⁄ 2 X 21⁄ 2 X 3⁄ 4 65 x 65 x 20 12 33 15 2 6 16 7.4 1
⁄2 15 140 52 24 4 35 13 5.9
21⁄ 2 X 21⁄ 2 X 1 65 x 65 x 25 12 34 15 2 6 17 7.8 3
⁄4 20 80 50 23 4 20 12 5.6
21⁄ 2 X 21⁄ 2 X 11⁄ 4 65 x 65 x 32 12 40 18 2 6 20 9.1 1 25 40 34 15 4 10 8.6 3.9
21⁄ 2 X 21⁄ 2 X 11⁄ 2 65 x 65 x 40 12 42 19 2 6 21 9 11⁄4 32 24 39 18 4 6 9.8 4.4
1 1
2 ⁄2 X 2 ⁄2 X 2 65 x 65 x 50 12 44 20 2 6 22 10 11⁄2 40 20 40 18 2 10 20 9.1
1 1
2 ⁄2 X 2 ⁄2 X 3 65 x 65 x 80 8 47 21 2 4 23 11 2 50 12 37 17 2 6 18 8.3
3X2X2 80 x 50 x 50 8 36 16 2 4 18 8.1 21⁄2 65 4 23 10 – – 0.0 0.0
3X2X3 80 x 50 x 80 8 46 21 2 4 23 10 3 80 0 0 0 – – 0.0 0.0
3 X 21⁄ 2 X 2 80 x 65 x 50 8 38 17 2 4 19 8.7 4 100 0 0 0 – – 0.0 0.0
3 X 21⁄ 2 X 21⁄ 2 80 x 65 x 65 8 46 21 2 4 23 11 Open Pattern Return Bend:
3 X 3 X 3⁄ 4 80 x 80 x 20 8 32 15 2 4 16 7.3 Fig. 1119 (Pg. pf-66)
3X3X1 80 x 80 x 25 8 33 15 2 4 17 7.5 1
⁄2† 15† 160 58 26 8 20 7.2 3.3
3 X 3 X 11⁄ 4 80 x 80 x 32 8 36 16 2 4 18 8.2 3
⁄4† 20† 80 51 23 4 20 13 5.8
3 X 3 X 11⁄ 2 80 x 80 x 40 8 42 19 2 4 21 9 1 25 40 44 20 4 10 11 5.0
3X3X2 80 x 80 x 50 8 46 21 2 4 23 10 11⁄4† 32† 24 42 19 2 12 21 10
3 X 3 X 21⁄ 2 80 x 80 x 65 8 49 22 2 4 24 11
11⁄2† 40† 20 51 23 2 10 26 12
4X3X4 100 x 80 x 100 4 42 19 – – – – 2 50 12 48 22 2 6 24 11
4 X 4 X 11⁄ 2 100 x 100 x 40 4 30 14 – – – –
Coupling: Fig. 1121 (Pg. pf-65)
4X4X2 100 x 100 x 50 4 34 15 – – – –
1
4 X 4 X 21⁄ 2 100 x 100 x 65 4 38 17 – – – – ⁄8 6 160 10.0 4.5 4 40 2.4 1.1
1
4X4X3■ 100 x 100 x 80 0 0 0 – 4 – ⁄4 8 105 9.0 4.1 3 35 3.2 1.5
3
⁄8 10 60 8.0 3.6 2 30 3.9 1.8
Street Tee: Fig. 1106 (Pg. pf-64) 1
⁄2 15 40 8.0 3.6 2 20 4.0 1.8 ❏
1
⁄4 8 50 8.0 3.6 2 25 3.8 1.7 3
⁄4 20 240 72 33 4 60 18 8.2 ❏
3
⁄8 10 24 6.0 2.7 2 12 2.9 1.3
1 25 100 48 22 4 25 12 5.4 ❏
1
⁄2 15 120 41 19 8 15 5.1 2.3 5.1 ❏ blk
11⁄4 32 60 45 20 4 15 11
3
⁄4 20 60 37 17 4 15 9.2 4.2 ❏
11⁄2 40 40 40 18 4 10 10.0 4.5
1 25 40 38 17 4 10 9.6 4.4 2 50 20 29 13 4 5 7.3 3.3 ❏
11⁄4 32 24 33 15 4 6 8.3 3.8
21⁄2 65 24 58 26 2 12 29 13 ❏ blk
11⁄2 40 24 46 21 2 12 23 11 3 80 8 26 12 2 4 13 6.0 ❏ blk
2 50 16 51 23 2 8 25 11 4 100 8 46 21 2 4 23 10 ❏ blk
Street Tee, Reducing: Fig. 1106R (Pg. pf-64)
11⁄4 x 1 x 11⁄4† 32 x 25 x 32† 32 43 20 4 8 11 4.9

PF – 118
Cartons
Size Size
No.
Weight. No.
No
▲Wt. Sold
No.
Weight. No.
No
▲Wt. Sold
Bags/ Box Bags/ Box
Only Only
Cap: Fig. 1124 (Pg. pf-66) Reducer: Fig. 1125 (Continued)

1
⁄2 15 300 36 16 4 75 9.0 4.1 ❏ 1
3 ⁄2 X 3 90 x 80 8 40 18 2 4 20 9.1
3
⁄4 20 240 53 24 4 60 13 6.0 ❏ 4 X 11⁄2 100 x 40 – – – – 4 – –
1 25 140 53 24 4 35 13 6.0 ❏ 4X2 100 x 50 – – – – 4 – – ❏ blk
11⁄4 32 100 58 26 4 25 15 6.6 ❏ blk 4 X 21⁄2 100 x 65 – – – – 4 – –
11⁄2 40 80 58 26 4 20 15 6.6 ❏ 4X3 100 x 80 – – – – 4 – – ❏
2 50 48 54 24 4 12 14 6.2 ❏ 4 X 31⁄2 100 x 90 – – – – 4 – –
21⁄2 65 30 53 24 2 15 26 12 ❏ blk Waste Nut, oval: Fig. 1133 (Pg. pf-67)
3 80 24 63 29 2 12 31 14 ❏ 1
⁄4† 8† 150 8.0 3.6 3 50 2.5 1.1
31⁄2 90 16 51 23 2 8 26 12 1
⁄2† 15† 100 12 5.4 2 50 6.0 2.7
4 100 8 36 16 2 4 18 8.3 ❏ 3
⁄4 20 50 8.0 3.6 2 25 3.8 1.7
5 125 8 52 24 2 4 26 12
6 150 – – – – – – – Locknut, Hex : Fig. 1134 (Pg. pf-65)
3
Reducer: Fig. 1125 (Pg. pf-66) ⁄8 10 200 8.0 3.6 4 50 2.0 0.91
1
1
⁄4 X 1⁄8 8x6 100 7.0 3.2 4 25 1.8 0.82 ❏ blk ⁄2 15 150 9.0 4.1 3 50 3.0 1.4
3
3
⁄8 X 1⁄8 10 x 6 90 10.0 4.5 3 30 3.3 1.5 ⁄4 20 100 8.0 3.6 2 50 4.0 1.8
3
1.3 ❏ blk 1 25 50 7.0 3.2 2 25 3.5 1.6
⁄8 X 1⁄4 10 x 8 75 8.0 3.6 3 25 2.8
1 11⁄4 32 200 42 19 8 25 5.3 2.4
⁄2 X 1⁄8 15 x 6 40 6.0 2.7 2 20 2.8 1.3
1
1.7 ❏ blk 11⁄2 40 120 29 13 8 15 3.6 1.6
⁄2 X 1⁄4 15 x 8 50 8.0 3.6 2 25 3.8
2 50 100 40 18 4 25 10.0 4.5
1
⁄2 X 3⁄8 15 x 10 50 9.0 4.1 2 25 4.3 2.0 ❏ blk
3
⁄4 X 1⁄8 20 x 6 160 38 17 8 20 4.8 2.2 Extension Piece: Fig. 1137 (Pg. pf-67)
3
3
⁄4 X ⁄4 1
20 x 8 24 5.0 2.3 2 12 2.6 1.2 ⁄8 10 50 5.0 2.3 2 25 2.5 1.1
3
⁄4 X ⁄8 3
20 x 10 200 50 23 4 50 13 5.7 1
⁄2 15 40 6.0 2.7 2 20 3.0 1.4 ❏ blk
3
3
⁄4 X ⁄2 1
20 x 15 240 65 29 4 60 16 7.3 ❏ ⁄4 20 240 62 28 4 60 16 7.1
1 X ⁄4 1
25 x 8 160 56 25 8 20 7.0 3.2 1 25 120 50 23 4 30 13 5.7
1 X 3⁄8 25 x 10 160 56 25 8 20 7.0 3.2 Floor Flange: Fig. 1190 (Pg. pf-64)
1 X ⁄2 1
25 x 15 180 70 32 4 45 18 8.0 ❏ 1
⁄2 15 120 66 30 4 30 17 7.5
1 X 3⁄4 25 x 20 140 60 27 4 35 15 6.8 ❏ 3
⁄4 20 80 43 20 4 20 11 4.9 ❏
11⁄4 X 1⁄2 32 x 15 60 37 17 4 15 9.2 4.2 1 25 60 46 21 4 15 11 5.2 ❏ blk
11⁄4 X 3⁄4 32 x 20 80 51 23 4 20 13 5.8 ❏ blk 11⁄4 32 50 45 20 2 25 23 10 ❏
1
1 ⁄4 X 1 32 x 25 80 54 24 4 20 14 6.2 ❏ blk 11⁄2 40 40 48 22 4 10 12 5.4 ❏ blk
1 1
1 ⁄2 X ⁄2 40 x 15 60 47 21 4 15 12 5.3 2 50 30 60 27 2 15 30 14 ❏
11⁄2 X 3⁄4 40 x 20 60 53 24 4 15 13 6.0 ❏ blk 45° Street Elbow: Fig. 1160 (Pg. pf-68)
11⁄2 X 1 40 x 25 60 53 24 4 15 13 6.0 ❏ blk 1
⁄2† 15 24 9.0 4.1 2 12 4.3 2.0
11⁄2 X 11⁄4 40 x 32 40 36 16 4 10 9.0 4.1 ❏ blk 3
⁄4† 20 120 65 29 4 30 16 7.3
2 X 1⁄2 50 x 15 40 52 24 4 10 13 5.9 1† 25 60 51 23 4 15 13 5.8
2 X 3⁄4 50 x 20 20 27 12 4 5 6.7 3.0 ❏ blk 11⁄4† 32 40 60 27 4 10 15 6.8 ❏ blk
2X1 50 x 25 20 28 13 4 5 7.0 3.2 ❏
11⁄2† 40 24 49 22 4 6 12 5.6
2 X 11⁄4 50 x 32 20 31 14 4 5 7.7 3.5 ❏ blk 2† 50 16 53 24 2 8 27 12
2 X 11⁄2 50 x 40 20 31 14 4 5 7.8 3.5 ❏
1
90° Elbow: Fig. 1161 (Pg. pf-68)
2 ⁄2 X 1 65 x 25 20 42 19 2 10 21 10
1
⁄4 8 40 8.0 3.6 2 20 4.0 1.8 ❏ blk
21⁄2 X 11⁄4 65 x 32 20 42 19 2 10 21 9
3
⁄8 10 30 9.0 4.1 2 15 4.4 2.0
21⁄2 X 11⁄2 65 x 40 14 29 13 2 7 15 6.6
1
⁄2 15 160 75 34 4 40 19 8.5 ❏
21⁄2 X 2 65 x 50 16 40 18 2 8 20 9 ❏ blk
3
⁄4 20 80 53 24 4 20 13 6.0 ❏
3X1 80 x 25 10 32 15 2 5 16 7.2
1 25 60 69 31 4 15 17 7.8 ❏
3 X 11⁄4 80 x 32 8 24 11 2 4 12 5.4
11⁄4 32 26 49 22 2 13 25 11 ❏ blk
3 X 11⁄2 80 x 40 8 24 11 2 4 12 5.5
11⁄2 40 20 49 22 2 10 25 11 ❏
3X2 80 x 50 10 34 15 2 5 17 7.8 ❏
2 50 12 45 20 2 6 23 10 ❏
3 X 2 ⁄2 1
80 x 65 10 33 15 2 5 17 7.5 ❏ blk
21⁄2 65 6 39 18 2 3 20 8.8 ❏ blk
31⁄2 X 2 90 x 50 8 35 16 2 4 17 7.8
3 80 4 40 18 2 2 20 9.0 ❏ blk
PF – 119
Cartons
Size Size
No.
Weight. No.
No
▲Wt. Sold
No.
Weight. No.
No
▲Wt. Sold
Bags/ Box Bags/ Box
Only Only
90° Reducing Elbow: Fig. 1161R (Pg. pf-68) Reducing Tee: Fig. 1164R (Pg. pf-70)
3 1 3 3 1
⁄8 X ⁄4 † 10 x 8 50 13 5.9 2 25 6.5 2.9 ⁄8 X ⁄8 X ⁄4 † 10 x 10 x 8 120 44 20 4 30 11 5.0
1
⁄2 X 3⁄8 † 15 x 10 50 21 10 2 25 10 4.7 1
⁄2 X 1⁄2 X 1⁄4 † 15 x 15 x 8 104 50 23 2 52 25 11
3
⁄4 X 1⁄2 20 x 15 40 25 11 2 20 12 5.6 1
⁄2 X 1⁄2 X 3⁄4 † 15 x 15 x 20 52 42 19 4 13 10 4.7
1 X 1⁄2 25 x 15 40 35 16 2 20 17 7.9 3
⁄4 X 1⁄2 X 3⁄4 † 20 x 15 x 20 52 48 22 4 13 12 5.5
3 3
1 X ⁄4 † 25 x 20 40 40 18 2 20 20 9.1 ⁄4 X 3⁄4 X 1⁄4 20 x 20 x 8 60 46 21 4 15 11 5.2
11⁄4 X 3⁄4 † 32 x 20 30 42 19 2 15 21 10 3
⁄4 X 3⁄4 X 3⁄8 † 20 x 20 x 10 52 42 19 4 13 10 4.7
11⁄4 X 1 † 32 x 25 30 48 22 2 15 24 11 3
⁄4 X 3⁄4 X 1⁄2 20 x 20 x 15 52 47 21 4 13 12 5.3
11⁄2 X 1 † 40 x 25 20 38 17 2 10 19 8.6 1 X 1⁄2 X 1 † 25 x 15 x 25 36 49 22 2 18 25 11
11⁄2 X 11⁄4 † 40 x 32 20 43 20 2 10 22 10 1 X 3⁄4 X 3⁄4 † 25 x 20 x 20 40 51 23 4 10 13 5.8
2 X 11⁄4 † 50 x 32 10 31 14 2 5 16 7.1 1 X 3⁄4 X 1 † 25 x 20 x 25 36 50 23 4 9 12 5.6
1
2 X 1 ⁄2 † 50 x 40 10 33 15 2 5 17 7.5 1 X 1 X 1⁄4 † 25 x 25 x 8 36 39 18 4 9 9.8 4.4
45° Elbow: Fig. 1162 (Pg. pf-69) 1 X 1 X 1⁄2 25 x 25 x 15 40 50 23 4 10 13 5.7
1
8 50 10.0 4.5 2 25 4.8 2.2 1 X 1 X 3⁄4 25 x 25 x 20 40 53 24 4 10 13 6.0
⁄4
3
10 30 8.0 3.6 2 15 4.2 1.9 11⁄4 X 1 X 1 † 32 x 25 x 25 28 54 24 2 14 27 12
⁄8
1
15 20 9.0 4.1 2 10 4.3 2.0 11⁄4 X 11⁄4 X 1⁄2 32 x 32 x 15 30 51 23 2 15 26 12
⁄2
3
20 96 63 29 8 12 7.9 3.6 11⁄4 X 11⁄4 X 3⁄4 32 x 32 x 20 24 46 21 2 12 23 10
⁄4
1 25 60 60 27 4 15 15 6.8 ❏ blk 11⁄4 X 11⁄4 X 1 32 x 32 x 25 24 50 23 4 6 13 5.7
11⁄4 32 30 50 23 2 15 25 11 ❏ blk 11⁄2 X 11⁄2 X 1⁄2 40 x 40 x 15 20 45 20 2 10 23 10
1
1 ⁄2 40 22 47 21 2 11 24 11 ❏ blk 11⁄2 X 11⁄2 X 3⁄4 40 x 40 x 20 20 49 22 2 10 25 11
2 50 12 41 19 2 6 20 9 ❏ blk 11⁄2 X 11⁄2 X 1 40 x 40 x 25 18 47 21 2 9 23 11
1
2 ⁄2 65 8 44 20 2 4 22 10 11⁄2 X 11⁄2 X 11⁄4 † 40 x 40 x 32 18 55 25 2 9 28 12
3 80 6 49 22 2 3 24 11 2 X 11⁄2 X 2† 50 x 40 x 50 10 45 20 2 5 23 10
4† 100 3 40 18 – – 0.0 0.0 2 X 2 X 1⁄2 50 x 50 x 15 10 34 15 2 5 17 7.7
Cap: Fig. 1163 (Pg. pf-71) 2 X 2 X 3⁄4 50 x 50 x 20 16 57 26 2 8 29 13 ❏ blk
1 2X2X1 50 x 50 x 25 12 44 20 2 6 22 10 ❏ blk
⁄4 8 120 12 5.4 3 40 4.0 1.8
3 2 X 2 X 11⁄4 50 x 50 x 32 12 51 23 2 6 25 11
⁄8 10 75 11 5.0 3 25 3.8 1.7
1 2 X 2 X 11⁄2 50 x 50 x 40 10 46 21 2 5 23 10
⁄2 15 30 7.0 3.2 2 15 3.5 1.6
3 2 ⁄2 X 21⁄2 X 11⁄2 † 65 x 65 x 40
1
8 51 23 2 4 25 12
⁄4 20 24 8.0 3.6 2 12 4.2 1.9
3X3X2 80 x 80 x 50 4 38 17
1 25 120 70 32 8 15 8.7 3.9
11⁄4 32 80 75 34 8 10 9.4 4.3 Cross: Fig. 1165 (Pg. pf-69)
3
1
1 ⁄2 40 40 47 21 8 5 5.9 2.7 ⁄8 † 10 80 37 17 2 40 18 8.3
3
2 50 32 62 28 4 8 16 7.0 ⁄4 20 50 63 29 2 25 31 14
21⁄2 65 20 66 30 2 10 33 15 1† 25 26 49 22 2 13 25 11 ❏ blk
3 80 16 75 34 2 8 38 17 11⁄4 † 32 16 52 24 2 8 26 12
Tee: Fig. 1164 (Pg. pf-70) 11⁄2 † 40 12 50 23 2 6 25 11
2† 50 6 39 18 2 3 20 8.8
1
⁄4 8 30 8.0 3.6 2 15 4.1 1.9 ❏ blk
3
⁄8 10 20 8.0 3.6 2 10 4.2 1.9 Coupling: Fig. 1166 (Pg. pf-71)
1
1
⁄2 15 100 65 29 4 25 16 7.4 ❏ ⁄4 8 60 10.0 4.5 2 30 5.1 2.3
3
3
⁄4 20 60 64 29 4 15 16 7.3 ❏ blk ⁄8 10 20 5.0 2.3 2 10 2.6 1.2
1
1 25 40 65 29 4 10 16 7.3 ❏ blk ⁄2 15 20 8.0 3.6 2 10 4.0 1.8
11⁄4 32 20 50 23 2 10 25 11 ❏ blk 3
⁄4 20 96 62 28 8 12 7.8 3.5
11⁄2 40 14 48 22 2 7 24 11 ❏ blk 1 25 64 63 29 8 8 7.9 3.6
2 50 10 52 24 2 5 26 12 ❏ blk 11⁄4 32 30 49 22 2 15 25 11
1
2 ⁄2 65 4 34 15 11⁄2 40 24 49 22 2 12 24 11
3 80 4 50 23 2 50 16 52 24 2 8 26 12 ❏ blk
21⁄2 65 10 55 25 2 5 27 12
3 80 6 44 20 2 3 22 10

PF – 120
Cartons
Size Size
No.
Weight. No.
No
▲Wt. Sold
No.
Weight. No.
No
▲Wt. Sold
Bags/ Box Bags/ Box
Only Only
Reducer: Fig. 1167 (Pg. pf-71) 150 lb. Union: Fig. 463 (Pg. pf-72)
3 1 1
⁄8 X ⁄4 10 x 8 48 10.0 4.5 2 24 5.0 2.3 ⁄8 6 75 11 5.0 3 25 3.6 1.6
1
⁄2 X 1⁄4 15 x 8 24 15 6.8 2 12 7.4 3.4 1
⁄4 8 160 72 33 4 40 18 8.2 ❏ blk
1
⁄2 X 3⁄8 15 x 10 24 16 7.3 2 12 8.2 3.7 3
⁄8 10 160 67 30 4 40 17 7.6
3
⁄4 X 1⁄4 20 x 8 90 41 19 2 45 21 9 1
⁄2 15 160 70 32 4 40 18 8.0 ❏
3
⁄4 X 3⁄8 20 x 10 90 42 19 2 45 21 10 3
⁄4 20 120 74 34 4 30 18 8.3 ❏
3
⁄4 X 1⁄2 20 x 15 90 45 20 2 45 23 10 1 25 60 55 25 4 15 14 6.2 ❏
1 X 1⁄4 25 x 8 60 40 18 4 15 9.9 4.5 11⁄4 32 32 45 20 4 8 11 5.1 ❏
1 X ⁄8 3
25 x 10 80 57 26 4 20 14 6.4 11⁄2 40 30 51 23 2 15 25 12 ❏
1 X ⁄2 1
25 x 15 80 57 26 4 20 14 6.4 2 50 24 61 28 2 12 31 14 ❏
1 X 3⁄4 25 x 20 60 46 21 2 30 23 10 150 lb. Union: Fig. 463R (Pg. pf-72)
11⁄4 X 1⁄2 32 x 15 44 49 22 2 22 25 11 3
⁄4 X 1⁄2 20 x 15 120 66 30 4 30 17 7.5
11⁄4 X 3⁄4 32 x 20 48 56 25 4 12 14 6.3
250 lb. Union: Fig. 554 (Pg. pf-72)
11⁄4 X 1 32 x 25 48 61 28 4 12 15 6.9 1
⁄8 6 75 11 5.0 3 25 3.5 1.6
11⁄2 X 1⁄2 40 x 15 32 48 22 2 16 24 11 1
⁄4 8 160 72 33 4 40 18 8.2
11⁄2 X 3⁄4 40 x 20 40 63 29 4 10 16 7.1 3
⁄8 10 200 74 34 8 25 9.3 4.2
11⁄2 X 1 40 x 25 32 52 24 4 8 13 5.9 1
1 1 ⁄2 15 120 64 29 4 30 16 7.2
1 ⁄2 X 1 ⁄4 40 x 32 32 57 26 4 8 14 6.4 3
⁄4 20 80 64 29 4 20 16 7.3
2 X 1⁄2 † 50 x 15 24 57 26 2 12 29 13
1 25 40 51 23 2 20 26 12
2 X 3⁄4 50 x 20 20 49 22 2 10 24 11
11⁄4 32 30 49 22 2 15 25 11
2X1 50 x 25 18 46 21 2 9 23 10
11⁄2 40 30 62 28 2 15 31 14
2 X 11⁄4 50 x 32 12 30 14 2 6 15 6.9
2 50 9 31 14 1 9 31 14
2 X 11⁄2 50 x 40 20 54 24 2 10 27 12 ❏ blk
300 lb. Union: Fig. 459 (Pg. pf-72)
21⁄2 X 11⁄2 65 x 40 8 33 15 2 4 16 7.4
1
1
2 ⁄2 X 2 65 x 50 10 43 20 2 5 22 10 ⁄8 6 75 11 5.0 3 25 3.5 1.6
1
3 X 1 ⁄2† 1
80 x 40 8 46 21 2 4 23 11 ⁄4 8 160 72 33 4 40 18 8.2
3
3X2 80 x 50 8 47 21 2 4 23 11 ⁄8 10 200 86 39 8 25 11 4.9
3 X 2 ⁄2 1
80 x 65 8 52 24 2 4 26 12 1
⁄2 15 120 64 29 8 15 8.0 3.6 ❏ blk
4 X 2† 100 x 50 4 38 17 3
⁄4 20 80 64 29 4 20 16 7.3 ❏ blk
4X3 100 x 80 4 40 18 1 25 40 51 23 4 10 13 5.8 ❏ blk
90° Street Elbow: Fig. 1170 (Pg. pf-69) 11⁄4 32 40 65 29 2 20 33 15 ❏ blk
1 11⁄2 40 24 49 22 2 12 25 11 ❏ blk
⁄4 8 60 10.0 4.5 2 30 5.1 2.3
3 2 50 18 73 33 2 9 37 17 ❏ blk
⁄8 10 30 8.0 3.6 2 15 3.9 1.8
1
⁄2 15 160 75 34 8 20 9.4 4.3 ❏ blk Dart Union: Fig. 832 (Pg. pf-106)
3
3
⁄4 20 100 68 31 4 25 17 7.7 ❏ blk ⁄8 10 160 66 30 8 20 8.2 3.7
1
1 25 60 62 28 4 15 16 7.1 ⁄2 15 120 77 35 8 15 9.6 4.4
3
11⁄4 32 30 48 22 2 15 24 11 ⁄4 20 60 47 21 2 30 23 11
11⁄2 40 20 44 20 2 10 22 10 1 25 40 52 24 4 10 13 5.9
2 50 8 29 13 2 4 14 6.5 11⁄4 32 24 45 20 2 12 23 10
3 80 4 38 17 2 2 19 8.7 11⁄2 40 24 57 26 2 12 28 13
2 50 14 55 25 2 7 27 12

PF – 121
Palleted
Malleable Iron Fittings
▲Wt./
Size ▲Wt./Carton No. No.
Pcs./Carton pallet
Cartons Pcs
NPS DN Lbs Kg Lbs Kg
Hex Bushing: Fig. 383 (Pg. pf-89)
3
⁄4 x 1⁄8 20 x 6 80 10.0 4.5 177 14,160 1,699 771
3
⁄4 x 1⁄4 ❏ blk 20 x 8 75 11 5.0 177 13,275 1,859 843
3
⁄4 x 3⁄8 ❏ blk 20 x 10 75 8.0 3.6 177 13,275 1,460 662
3
⁄4 x 1⁄2 ❏ 20 x 15 75 7.0 3.2 177 13,275 1,195 542
1 x 1⁄8 25 x 6 50 12 5.4 177 8,850 2,124 963
1 x 1⁄4 ❏ blk 25 x 8 50 9.0 4.1 177 8,850 1,593 723
1 x 3⁄8 25 x 10 50 9.0 4.1 177 8,850 1,593 723
1 x 1⁄2 ❏ 25 x 15 200 37 17 27 5,400 1,004 455
1 x 3⁄4 ❏ 25 x 20 200 32 15 27 5,400 864 392
11⁄4 x 1⁄4 32 x 8 160 53 24 27 4,320 1,426 647
11⁄4 x 3⁄8 32 x 10 200 54 24 27 5,400 1,458 661
11⁄4 x 1⁄2 32 x 15 140 48 22 27 3,780 1,285 583
11⁄4 x 3⁄4 ❏ 32 x 20 140 55 25 27 3,780 1,474 669
11⁄4 x 1 ❏ 32 x 25 200 60 27 27 5,400 1,620 735
11⁄2 x 11⁄4 ❏ 40 x 32 120 36 16 27 3,240 972 441
2 x 11⁄2 ❏ 50 x 40 80 51 23 27 2,160 1,382 627
21⁄2 x 2 ❏ gal 65 x 50 40 41 19 27 1,080 1,102 500
Face Bushing: Fig. 385 (Pg. pf-90)
3
⁄4 x 3⁄8† 20 x 10 800 64 29 27 21,600 1,728 784
3
⁄4 x 1⁄2 20 x 15 800 48 22 27 21,600 1,296 588
1 x 1⁄2 25 x 15 400 64 29 27 10,800 1,728 784
1 x 3⁄4 25 x 20 400 40 18 27 10,800 1,080 490
11⁄4 x 1⁄2 32 x 15 240 72 33 27 6,480 1,944 882
11⁄4 x 3⁄4 32 x 20 240 65 29 27 6,480 1,750 794
11⁄4 x 1 32 x 25 280 53 24 27 7,560 1,436 651
11⁄2 x 1⁄2 40 x 15 160 64 29 27 4,320 1,728 784
11⁄2 x 3⁄4† 40 x 20 160 62 28 27 4,320 1,685 764
11⁄2 x 1† 40 x 25 200 66 30 27 5,400 1,782 808
11⁄2 x 11⁄4 40 x 32 200 32 15 27 5,400 864 392
2x1 50 x 25 100 65 29 27 2,700 1,755 796
2 x 11⁄4 50 x 32 100 53 24 27 2,700 1,431 649
2 x 11⁄2 50 x 40 120 48 22 27 3,240 1,296 588
21⁄2 x 11⁄4 65 x 32 60 66 30 27 1,620 1,782 808
21⁄2 x 11⁄2 65 x 40 60 56 25 27 1,620 1,507 684
21⁄2 x 2 65 x 50 60 24 11 27 1,620 648 294
3 x 21⁄2 80 x 65 40 40 18 27 1,080 1,069 485
Bar Plugs (Countersunk): Fig. 390 (Pg. pf-91)
1
⁄2 15 200 10.0 4.5 177 35,400 1,770 803
3
⁄4 20 100 11 5.0 177 17,700 1,947 883
Class 300 Union: Fig. 459 (Pg. pf-72)
1
⁄8 6 75 11 5.0 177 13,275 1,859 843
1
⁄4 8 160 72 33 27 4,320 1,944 882
3
⁄8 10 200 86 39 27 5,400 2,322 1,053
1
⁄2 15 120 64 29 27 3,240 1,717 779
3
⁄4 20 80 64 29 27 2,160 1,728 784
1 25 40 51 23 27 1,080 1,378 625
11⁄4 32 40 65 29 27 1,080 1,764 800
11⁄2 40 24 49 22 27 648 1,328 602
2 50 18 73 33 27 486 1,983 899
▲Weights shown are for black; † Black only; ■ Galvanized Only, ❏ blk - Sold in box only for Black finish, ❏ gal - Sold in box only for Galvanized finish, ❏ - Sold in box only for both finish
PF – 122
Palleted
▲Wt./
Pcs./Carton pallet
Cartons Pcs
1
⁄8 6 75 11 5.0 177 13,275 1,925 873
1
⁄4 8 160 72 33 27 4,320 1,944 882
3
⁄8 10 160 67 30 27 4,320 1,814 823
1
⁄2 15 160 70 32 27 4,320 1,901 862
3
⁄4 20 120 72 33 27 3,240 1,944 882
1 25 60 55 25 27 1,620 1,474 669
11⁄4 32 32 46 21 27 864 1,253 568
11⁄2 40 30 51 23 27 810 1,369 621
2 50 24 59 27 27 648 1,594 723
Class 150 Union: Fig. 463R (Pg. pf-72)
3 1
⁄4 X ⁄2 20 x 15 120
1
⁄8 6 75 11 5.0 177 13,275 1,859 843
1
⁄4 8 160 72 33 27 4,320 1,944 882
3
⁄8 10 200 74 34 27 5,400 1,998 906
1
⁄2 15 120 64 29 27 3,240 1,717 779
3
⁄4 20 80 64 29 27 2,160 1,728 784
1 25 40 51 23 27 1,080 1,382 627
11⁄4 32 30 49 22 27 810 1,257 570
11⁄2 40 30 62 28 27 810 1,123 509
2 50 9 31 14 60 540 1,879 852
90° Elbow: Fig. 1101 (Pg. pf-58)
1
⁄8 6 105 6.0 2.7 177 18,585 1,115 506
1
⁄4 8 75 8.0 3.6 177 13,275 1,460 662
3
⁄8 10 40 7.0 3.2 177 7,080 1,204 546
1
⁄2 15 200 60 27 27 5,400 1,620 735
3
⁄4 20 140 63 29 27 3,780 1,701 772
1 25 80 58 26 27 2,160 1,577 715
11⁄4 32 48 47 21 27 1,296 1,257 570
11⁄2 40 32 42 19 27 864 1,123 509
2 50 20 41 19 27 540 1,112 504
21⁄2 65 10 37 17 27 270 986 447
3 80 8 44 20 27 216 1,179 535
31⁄2 90 6 43 20 27 162 1,150 522
4 100 5 43 20 27 135 1,162 527
Dart Union Figure 832 (Pg. pf-106)
3
⁄8 10 160 66 30 27 4,320 1,771 803
1
⁄2 15 120 77 35 27 3,240 2,074 941
3
⁄4 20 60 47 21 27 1,620 1,264 573
1 25 40 52 24 27 1,080 1,404 637
11⁄4 32 24 45 20 27 648 1,225 556
11⁄2 40 24 57 26 27 648 1,536 697
2 50 14 55 25 27 378 1,478 670

PF – 123
Palleted
▲Wt./
Pcs./Carton pallet
Cartons Pcs
90° Reducing Elbow: Figure 1101R (Pg. pf-59)
1 1
⁄4 x ⁄8 8x6 100 10.0 4.5 177 17,700 1,770 803
3
⁄8 x 1⁄8 10 x 6 75 9.0 4.1 177 13,275 1,593 723
3
⁄8 x 1⁄4 10 x 8 50 7.0 3.2 177 8,850 1,239 562
1
⁄2 x 1⁄4 15 x 8 30 6.0 2.7 177 5,310 1,009 458
1
⁄2 x 3⁄8 15 x 10 300 66 30 27 8,100 1,782 808
3
⁄4 x 1⁄4 20 x 8 24 6.0 2.7 177 4,248 1,104 501
3
⁄4 x 3⁄8 20 x 10 160 46 21 27 4,320 1,253 568
3
⁄4 x 1⁄2 20 x 15 180 68 31 27 4,860 1,847 838
1 x 3⁄8 25 x 10 120 49 22 27 3,240 1,328 602
1 x 1⁄2 25 x 15 100 46 21 27 2,700 1,242 563
1 x 3⁄4 25 x 20 80 45 20 27 2,160 1,210 549
11⁄4 x 1⁄2 32 x 15 80 49 22 27 2,160 1,318 598
11⁄4 x 3⁄4 32 x 20 60 43 20 27 1,620 1,150 522
11⁄4 x 1 32 x 25 60 52 24 27 1,620 1,409 639
11⁄2 x 3⁄4 40 x 20 48 40 18 27 1,296 1,076 488
11⁄2 x 1 40 x 25 48 49 22 27 1,296 1,322 600
11⁄2 x 11⁄4 40 x 32 32 37 17 27 864 1,011 459
2 x 3⁄4 50 x 20 24 31 14 27 648 842 382
2x1 50 x 25 30 41 19 27 810 1,094 496
2 x 11⁄4 50 x 32 24 37 17 27 648 991 450
2 x 11⁄2 50 x 40 24 42 19 27 648 1,134 514
21⁄2 x 11⁄2 65 x 40 12 30 14 27 324 823 373
21⁄2 x 2 65 x 50 10 30 14 27 270 805 365
3x2 80 x 50 8 30 14 27 216 816 370
3 x 21⁄2 80 x 65 8 34 15 27 216 929 421
4x3 100 x 80 4 31 14 27 108 842 382
45° Elbow: Fig. 1102 (Pg. pf-58)
1
⁄8 6 150 11 5.0 177 26,550 1,859 843
1
⁄4 8 70 8.0 3.6 177 12,390 1,363 618
3
⁄8 10 40 6.0 2.7 177 7,080 1,133 514
1
⁄2 15 300 66 30 27 8,100 1,782 808
3
⁄4 20 160 59 27 27 4,320 1,598 725
1 25 100 54 24 27 2,700 1,458 661
11⁄4 32 60 52 24 27 1,620 1,393 632
11⁄2 40 32 36 16 27 864 976 443
2 50 24 43 20 27 648 1,160 526
21⁄2 65 10 28 13 27 270 751 341
3 80 8 36 16 27 216 968 439
4 100 4 30 14 27 108 799 362
PF – 124
Palleted
▲Wt./
Pcs./Carton pallet
Cartons Pcs
90° Street Elbow: Fig. 1103 (Pg. pf-60)
1
⁄8 6 120 7.0 3.2 177 21,240 1,274 578
1
⁄4 8 90 9.0 4.1 177 15,930 1,593 723
3
⁄8 10 40 7.0 3.2 177 7,080 1,204 546
1
⁄2 15 300 84 38 27 8,100 2,268 1,029
3
⁄4 20 160 66 30 27 4,320 1,771 803
1 25 60 37 17 27 1,620 1,004 455
11⁄4 32 40 44 20 27 1,080 1,177 534
11⁄2 40 32 46 21 27 864 1,244 564
2 50 20 57 26 27 540 1,539 698
21⁄2 65 8 32 15 27 216 864 392
3 80 4 24 11 27 108 654 297
4 100 4 42 19 27 108 1,137 516
90° Street Elbow: Figure 1103R (Pg. pf-60)
1
⁄2 x 3⁄8 15 x 10 280 64 29 27 7,560 1,739 789
3
⁄4 x 1⁄2 20 x 15 200 64 29 27 5,400 1,728 784
1 x 3⁄4 25 x 20 100 54 24 27 2,700 1,458 661
11⁄4 x 3⁄4 32 x 20 60 45 20 27 1,620 1,215 551
11⁄4 x 1 32 x 25 60 52 24 27 1,620 1,393 632
11⁄2 x 1 40 x 25 40 43 20 27 1,080 1,166 529
11⁄2 x 11⁄4 40 x 32 40 47 21 27 1,080 1,274 578
2 x 11⁄2 50 x 40 24 44 20 27 648 1,199 544
1
⁄8 6 150 9.0 4.1 177 26,550 1,593 723
1
⁄4 8 100 10.0 4.5 177 17,700 1,770 803
3
⁄8 10 50 7.0 3.2 177 8,850 1,239 562
1
⁄2 15 300 60 27 27 8,100 1,620 735
3
⁄4 20 160 53 24 27 4,320 1,426 647
1 25 100 52 24 27 2,700 1,404 637
11⁄4 32 60 51 23 27 1,620 1,377 625
11⁄2 40 40 49 22 27 1,080 1,318 598
2 50 24 46 21 27 648 1,244 564
Straight Tee: Fig. 1105 (Pg. pf-60)
1
⁄8 6 75 7.0 3.2 177 13,275 1,195 542
1
⁄4 8 40 6.0 2.7 177 7,080 1,062 482
3
⁄8 10 30 7.0 3.2 177 5,310 1,221 554
1
⁄2 15 160 66 30 27 4,320 1,771 803
3
⁄4 20 80 54 24 27 2,160 1,447 656
1 25 48 43 20 27 1,296 1,166 529
11⁄4 32 32 42 19 27 864 1,132 513
11⁄2 40 20 35 16 27 540 934 424
2 50 20 50 23 27 540 1,361 617
21⁄2 65 8 39 18 27 216 1,058 480
3 80 6 42 19 27 162 1,145 519
31⁄2 † 90 4 36 16 27 108 972 441
4 100 4 45 20 27 108 1,223 555
PF – 125
Palleted
▲Wt./
Pcs./Carton pallet
Cartons Pcs
Reducing Tee: Figure 1105R (Pg. pf-61)
1 1 1
⁄8 x ⁄8 x ⁄4 6x6x8 50 6.0 2.7 177 8,850 1,062 482
1
⁄4 x 1⁄4 x 1⁄8 8x8x6 50 7.0 3.2 177 8,850 1,151 522
1
⁄4 x 1⁄4 x 3⁄8 8 x 8 x 10 30 6.0 2.7 177 5,310 1,009 458
3
⁄8 x 1⁄4 x 1⁄4 10 x 8 x 8 30 6.0 2.7 177 5,310 1,009 458
3
⁄8 x 1⁄4 x 3⁄8 10 x 8 x 10 30 6.0 2.7 177 5,310 1,115 506
3
⁄8 x 3⁄8 x 1⁄4 10 x 10 x 8 30 6.0 2.7 177 5,310 1,115 506
3
⁄8 x 3⁄8 x 1⁄2 10 x 10 x 15 20 5.0 2.3 177 3,540 956 434
1
⁄2 x 1⁄4 x 1⁄2 15 x 8 x 15 20 6.0 2.7 177 3,540 1,027 466
1
⁄2 x 3⁄8 x 3⁄8 15 x 10 x 10 20 6.0 2.7 177 3,540 991 450
1
⁄2 x 3⁄8 x 1⁄2 15 x 10 x 15 20 7.0 3.2 177 3,540 1,168 530
1
⁄2 x 1⁄2 x 1⁄4 15 x 15 x 8 20 5.0 2.3 177 3,540 956 434
1
⁄2 x 1⁄2 x 3⁄8 15 x 15 x 10 200 60 27 27 5,400 1,620 735
1
⁄2 x 1⁄2 x 3⁄4 15 x 15 x 20 120 54 24 27 3,240 1,458 661
1
⁄2 x 1⁄2 x 1 15 x 15 x 25 100 55 25 27 2,700 1,485 674
3
⁄4 x 1⁄4 x 3⁄4 20 x 8 x 20 120 54 24 27 3,240 1,458 661
3
⁄4 x 3⁄8 x 3⁄8† 20 x 10 x 10 140 50 23 27 3,780 1,361 617
3
⁄4 x 3⁄8 x 3⁄4 20 x 10 x 20 100 46 21 27 2,700 1,242 563
3
⁄4 x 1⁄2 x 1⁄2 20 x 15 x 15 140 60 27 27 3,780 1,625 737
3
⁄4 x 1⁄2 x 3⁄4 20 x 15 x 20 80 42 19 27 2,160 1,123 509
3
⁄4 x 3⁄4 x 1⁄4 20 x 20 x 8 140 53 24 27 3,780 1,436 651
3
⁄4 x 3⁄4 x 3⁄8 20 x 20 x 10 120 50 23 27 3,240 1,361 617
3
⁄4 x 3⁄4 x 1⁄2 20 x 20 x 15 80 38 17 27 2,160 1,015 460
3
⁄4 x 3⁄4 x 1 20 x 20 x 25 60 37 17 27 1,620 1,004 455
3
⁄4 x 3⁄4 x 11⁄4 20 x 20 x 32 40 36 16 27 1,080 972 441
1 x 1⁄4 x 1 25 x 8 x 25 60 41 19 27 1,620 1,118 507
1 x 1⁄2 x 1⁄2 25 x 15 x 15 100 55 25 27 2,700 1,485 674
1 x 1⁄2 x 3⁄4 25 x 15 x 20 80 45 20 27 2,160 1,210 549
1 x 1⁄2 x 1 25 x 15 x 25 60 46 21 27 1,620 1,231 558
1 x 3⁄4 x 1⁄2 25 x 20 x 15 80 47 21 27 2,160 1,274 578
1 x 3⁄4 x 3⁄4 25 x 20 x 20 60 44 20 27 1,620 1,199 544
1 x 3⁄4 x 1 25 x 20 x 25 60 47 21 27 1,620 1,264 573
1 x 1 x 1⁄4 25 x 25 x 8 80 42 19 27 2,160 1,145 519
1 x 1 x 3⁄8 25 x 25 x 10 80 48 22 27 2,160 1,296 588
1 x 1 x 1⁄2 25 x 25 x 15 60 42 19 27 1,620 1,134 514
3
1 x 1 x ⁄4 25 x 25 x 20 60 49 22 27 1,620 1,328 602
1
1 x 1 x 1 ⁄4 25 x 25 x 32 40 37 17 27 1,080 994 451
1
1 x 1 x 1 ⁄2 25 x 25 x 40 32 38 17 27 864 1,028 466
1x1x2 25 x 25 x 50 24 39 18 27 648 1,056 479
11⁄4 x 1⁄2 x 1 32 x 15 x 25 40 35 16 27 1,080 940 426
11⁄4 x 1⁄2 x 11⁄4 32 x 15 x 32 24 25 11 27 648 674 306
11⁄4 x 3⁄4 x 3⁄4 32 x 20 x 20 40 34 15 27 1,080 929 421
11⁄4 x 3⁄4 x 1 32 x 20 x 25 40 36 16 27 1,080 983 446
11⁄4 x 3⁄4 x 11⁄4 32 x 20 x 32 24 25 11 27 648 674 306
11⁄4 x 1 x 1⁄2 32 x 25 x 15 60 46 21 27 1,620 1,231 558
11⁄4 x 1 x 3⁄4 32 x 25 x 20 40 35 16 27 1,080 940 426
11⁄4 x 1 x 1 32 x 25 x 25 40 44 20 27 1,080 1,199 544

PF – 126
Palleted
▲Wt./
Pcs./Carton pallet
Cartons Pcs
Reducing Tee: Figure 1105R (continued)
1 1
1 ⁄4 x 1 x 1 ⁄4 32 x 25 x 32 24 27 12 27 648 732 332
11⁄4 x 11⁄4 x 3⁄8 32 x 32 x 10 40 34 15 27 1,080 929 421
11⁄4 x 11⁄4 x 1⁄2 32 x 32 x 15 40 39 18 27 1,080 1,058 480
11⁄4 x 11⁄4 x 3⁄4 32 x 32 x 20 32 34 15 27 864 924 419
11⁄4 x 11⁄4 x 1 32 x 32 x 25 40 47 21 27 1,080 1,274 578
11⁄4 x 11⁄4 x 11⁄2 32 x 32 x 40 30 44 20 27 810 1,175 533
11⁄4 x 11⁄4 x 2 32 x 32 x 50 24 41 19 27 648 1,102 500
11⁄2 x 1⁄2 x 11⁄2 40 x 15 x 40 30 40 18 27 810 1,077 489
11⁄2 x 3⁄4 x 3⁄4 40 x 20 x 20 40 40 18 27 1,080 1,080 490
11⁄2 x 3⁄4 x 11⁄2 40 x 20 x 40 30 42 19 27 810 1,142 518
11⁄2 x 1 x 1 40 x 25 x 25 32 36 16 27 864 985 447
11⁄2 x 1 x 11⁄4 40 x 25 x 32 30 39 18 27 810 1,053 478
11⁄2 x 1 x 11⁄2 40 x 25 x 40 30 45 20 27 810 1,215 551
11⁄2 x 11⁄4 x 1⁄2 40 x 32 x 15 40 42 19 27 1,080 1,134 514
11⁄2 x 11⁄4 x 3⁄4 40 x 32 x 20 32 35 16 27 864 933 423
11⁄2 x 11⁄4 x 1 40 x 32 x 25 32 40 18 27 864 1,089 494
11⁄2 x 11⁄4 x 11⁄4 40 x 32 x 32 24 36 16 27 648 985 447
11⁄2 x 11⁄4 x 11⁄2 40 x 32 x 40 24 36 16 27 648 972 441
11⁄2 x 11⁄2 x 1⁄2 40 x 40 x 15 32 38 17 27 864 1,028 466
11⁄2 x 11⁄2 x 3⁄4 40 x 40 x 20 24 32 15 27 648 855 388
11⁄2 x 11⁄2 x 1 40 x 40 x 25 24 35 16 27 648 940 426
11⁄2 x 11⁄2 x 11⁄4 40 x 40 x 32 24 35 16 27 648 940 426
11⁄2 x 11⁄2 x 2 40 x 40 x 50 24 45 20 27 648 1,205 547
2 x 1⁄2 x 2 50 x 15 x 50 20 43 20 27 540 1,161 527
2 x 3⁄4 x 2 50 x 20 x 50 20 40 18 27 540 1,080 490
2x1x2 50 x 25 x 50 20 43 20 27 540 1,156 524
2 x 11⁄4 x 11⁄4 50 x 32 x 32 20 34 15 27 540 929 421
2 x 11⁄4 x 11⁄2 50 x 32 x 40 20 37 17 27 540 999 453
2 x 11⁄4 x 2 50 x 32 x 50 20 44 20 27 540 1,188 539
2 x 11⁄2 x 1 50 x 40 x 25 24 38 17 27 648 1,017 461
2 x 11⁄2 x 11⁄4 50 x 40 x 32 20 35 16 27 540 950 431
2 x 11⁄2 x 11⁄2 50 x 40 x 40 20 39 18 27 540 1,053 478
2 x 11⁄2 x 2 50 x 40 x 50 16 36 16 27 432 968 439
2 x 2 x 1⁄2 50 x 50 x 15 30 50 23 27 810 1,337 606
2 x 2 x 3⁄4 50 x 50 x 20 24 45 20 27 648 1,212 550
2x2x1 50 x 50 x 25 24 42 19 27 648 1,140 517
2 x 2 x 11⁄4 50 x 50 x 32 20 47 21 27 540 1,269 576
2 x 2 x 11⁄2 50 x 50 x 40 20 51 23 27 540 1,377 625
2 x 2 x 21⁄2 50 x 50 x 65 12 42 19 27 324 1,134 514
21⁄2 x 11⁄2 x 2 65 x 40 x 50 12 41 19 27 324 1,111 504
21⁄2 x 11⁄2 x 21⁄2 65 x 40 x 65 12 46 21 27 324 1,231 558
21⁄2 x 2 x 2 65 x 50 x 50 12 39 18 27 324 1,063 482
21⁄2 x 2 x 21⁄2 65 x 50 x 65 8 32 15 27 216 875 397
21⁄2 x 21⁄2 x 3⁄4 65 x 65 x 20 12 33 15 27 324 881 400
21⁄2 x 21⁄2 x 1 65 x 65 x 25 12 34 15 27 324 923 419
21⁄2 x 21⁄2 x 11⁄4 65 x 65 x 32 12 40 18 27 324 1,079 489
21⁄2 x 21⁄2 x 11⁄2 65 x 65 x 40 12 42 19 27 324 1,121 508

PF – 127
Palleted
▲Wt./
Pcs./Carton pallet
Cartons Pcs
Reducing Tee: Figure 1105R (continued)
1 1
2 ⁄2 x 2 ⁄2 x 2 65 x 65 x 50 12 44 20 27 324 1,183 537
21⁄2 x 21⁄2 x 3 65 x 65 x 80 8 47 21 27 216 1,257 570
3x2x2 80 x 50 x 50 8 36 16 27 216 966 438
3x2x3 80 x 50 x 80 8 46 21 27 216 1,248 566
3 x 21⁄2 x 2 80 x 65 x 50 8 38 17 27 216 1,037 470
3 x 21⁄2 x 21⁄2 80 x 65 x 65 8 46 21 27 216 1,253 568
3
3 x 3 x ⁄4 80 x 80 x 20 8 32 15 27 216 870 395
3x3x1 80 x 80 x 25 8 33 15 27 216 892 405
3 x 3 x 11⁄4 80 x 80 x 32 8 36 16 27 216 972 441
3 x 3 x 11⁄2 80 x 80 x 40 8 42 19 27 216 1,121 508
3x3x2 80 x 80 x 50 8 46 21 27 216 1,231 558
3 x 3 x 21⁄2 80 x 80 x 65 8 49 22 27 216 1,315 596
4 x 4 x 11⁄2 100 x 100 x 40 4 30 14 27 108 1,123 509
4x4x2 100 x 100 x 50 4 34 15 27 108 807 366
4 x 4 x 21⁄2 100 x 100 x 65 4 38 17 27 108 906 411
4 x 4 x 3■ 100 x 100 x 80 4 42 19 27 108 1,034 469
Street or Service Tee: Fig. 1106 (Pg. pf-64)
1
⁄4 8 50 8.0 3.6 177 8,850 1,328 602
3
⁄8 10 24 6.0 2.7 177 4,248 1,020 463
1
⁄2 15 120 41 19 27 3,240 1,102 500
3
⁄4 20 60 37 17 27 1,620 988 448
1 25 40 38 17 27 1,080 1,037 470
11⁄4 32 24 33 15 27 648 901 409
11⁄2 40 24 46 21 27 648 1,251 567
2 50 16 51 23 27 432 1,365 619
Street or Service Tee: Fig. 1106R (Pg. pf-64)
1 1
1 ⁄4 x 1 x 1 ⁄4† 32 x 25 x 32 32
Cross: Fig. 1107 (Pg. pf-65)
1
⁄8 6 50 6.0 2.7 177 8,850 1,062 482
1
⁄4 8 30 5.0 2.3 177 5,310 956 434
3
⁄8 10 160 45 20 27 4,320 1,210 549
1
⁄2 15 120 50 23 27 3,240 1,361 617
3
⁄4 20 60 41 19 27 1,620 1,118 507
1 25 40 45 20 27 1,080 1,210 549
11⁄4 32 30 43 20 27 810 1,166 529
11⁄2 40 20 40 18 27 540 1,069 485
2 50 16 53 24 27 432 1,426 647
21⁄2 65 8 41 19 27 216 1,118 507
3 80 4 32 15 27 108 858 389
4 100 4
45° Y Branch: Fig. 1108 (Pg. pf-64)
3
⁄8 10 24 6.0 2.7 177 4,248 1,147 520
1
⁄2 15 140 52 24 27 3,780 1,399 635
3
⁄4 20 80 50 23 27 2,160 1,339 607
1 25 40 34 15 27 1,080 929 421
11⁄4 32 24 39 18 27 648 1,056 479
11⁄2 40 20 40 18 27 540 1,080 490
2 50 12 37 17 27 324 988 448
21⁄2 65 4 23 10 27 108 633 287

PF – 128
Palleted
▲Wt./
Pcs./Carton pallet
Cartons Pcs
Return Bends: Fig. 1119 (Pg. pf-66)
1
⁄2† 15 160 58 26 27 4,320 1,555 705
3
⁄4† 20 80 51 23 27 2,160 1,382 627
1 25 40 44 20 27 1,080 1,188 539
11⁄4† 32 24 42 19 27 648 1,147 520
11⁄2† 40 20 51 23 27 540 1,377 625
2 50 12 48 22 27 324 1,296 588
1
⁄8 6 160 10.0 4.5 177 28,320 1,699 771
1
⁄4 8 105 9.0 4.1 177 18,585 1,673 759
3
⁄8 10 60 8.0 3.6 177 10,620 1,381 626
1
⁄2 15 40 8.0 3.6 177 7,080 1,416 642
3
⁄4 20 240 72 33 27 6,480 1,944 882
1 25 100 48 22 27 2,700 1,296 588
11⁄4 32 60 45 20 27 1,620 1,215 551
11⁄2 40 40 40 18 27 1,080 1,080 490
2 50 20 29 13 27 540 783 355
21⁄2 65 24 58 26 27 648 1,555 705
3 80 8 26 12 27 216 713 323
4 100 8 46 21 27 216 1,236 561
Cap: Fig. 1124 (Pg. pf-66)
1
⁄2 15 300 36 16 27 8,100 972 441
3
⁄4 20 240 53 24 27 6,480 1,426 647
1 25 140 53 24 27 3,780 1,436 651
11⁄4 32 100 58 26 27 2,700 1,566 710
11⁄2 40 80 58 26 27 2,160 1,577 715
2 50 48 54 24 27 1,296 1,464 664
21⁄2 65 30 53 24 27 810 1,418 643
3 80 24 63 29 27 648 1,698 770
31⁄2 90 16 51 23 27 432 1,378 625
4 100 8 36 16 27 216 981 445
5 125 8 52 24 27 216 1,393 632
Reducer: Fig. 1125 (Pg. pf-66)
1 1
⁄4 x ⁄8 8x6 100 7.0 3.2 177 17,700 1,239 562
3
⁄8 x 1⁄8 10 x 6 90 10.0 4.5 177 15,930 1,752 795
3
⁄8 x 1⁄4 10 x 8 75 8.0 3.6 177 13,275 1,460 662
1
⁄2 x 1⁄8 15 x 6 40 6.0 2.7 177 7,080 991 450
1
⁄2 x 1⁄4 15 x 8 50 8.0 3.6 177 8,850 1,328 602
1
⁄2 x 3⁄8 15 x 10 50 9.0 4.1 177 8,850 1,505 683
3
⁄4 x 1⁄4 20 x 8 24 5.0 2.3 177 4,248 935 424
11⁄4 x 1⁄2 32 x 15 60 37 17 27 1,620 988 448
11⁄2 x 11⁄4 40 x 32 40 36 16 27 1,080 972 441
2 x 3⁄4 50 x 20 20 27 12 27 540 724 328
2x1 50 x 25 20 28 13 27 540 756 343
2 x 11⁄4 50 x 32 20 31 14 27 540 826 375
2 x 11⁄2 50 x 40 20 31 14 27 540 837 380
21⁄2 x 11⁄2 65 x 40 14 29 13 27 378 790 358
3x1 80 x 25 10 32 15 27 270 853 387
3 x 11⁄4 80 x 32 8 24 11 27 216 646 293
3 x 11⁄2 80 x 40 8 24 11 27 216 653 296
3x2 80 x 50 10 34 15 27 270 921 418
PF – 129
Palleted
▲Wt./
Pcs./Carton pallet
Cartons Pcs
Reducer: Fig. 1125 (Continued)
1
3 x 2 ⁄2 80 x 65 10 33 15 27 270 894 406
31⁄2 x 2 90 x 50 8 35 16 27 216 933 423
4 x 11⁄2 100 x 40 4 20 9.1 27 108 529 240
4x2 100 x 50 4 20 9.1 27 108 551 250
4 x 21⁄2 100 x 65 4 24 11 27 108 640 290
4x3 100 x 80 4 26 12 27 108 707 321
4 x 31⁄2 100 x 90 4 25 11 27 108 680 308
3
⁄4 x 1⁄8 20 x 6 160 38 17 27 4,320 1,037 470
3
⁄4 x 3⁄8 20 x 10 200 50 23 27 5,400 1,350 612
3
⁄4 x 1⁄2 20 x 15 240 65 29 27 6,480 1,750 794
1 x 1⁄4 25 x 8 160 56 25 27 4,320 1,512 686
1 x 3⁄8 25 x 10 160 56 25 27 4,320 1,512 686
1 x 1⁄2 25 x 15 180 70 32 27 4,860 1,895 860
1 x 3⁄4 25 x 20 140 60 27 27 3,780 1,625 737
11⁄4 x 3⁄4 32 x 20 80 51 23 27 2,160 1,382 627
11⁄4 x 1 32 x 25 80 54 24 27 2,160 1,469 666
11⁄2 x 1⁄2 40 x 15 60 47 21 27 1,620 1,264 573
11⁄2 x 3⁄4 40 x 20 60 53 24 27 1,620 1,426 647
11⁄2 x 1 40 x 25 60 53 24 27 1,620 1,426 647
2 x 1⁄2 50 x 15 40 52 24 27 1,080 1,404 637
21⁄2 x 1 65 x 25 20 42 19 27 540 1,145 519
1 1
2 ⁄2 x 1 ⁄4 65 x 32 20 42 19 27 540 1,129 512
1
2 ⁄2 x 2 65 x 50 16 40 18 27 432 1,084 492
1
3 ⁄2 x 3 90 x 80 8 40 18 27 216 1,078 489
Waste Nut: Fig. 1133 (Pg. pf-67)
1
⁄4† 8 150 8.0 3.6 20 3,000 150 68
1
⁄2† 15 100 12 5.4 177 17,700 2,124 963
3
⁄4 20 50 8.0 3.6 177 8,850 1,328 602
Hex Lock Nut: Fig. 1134 (Pg. pf-65)
1
⁄4 8 200 4.0 1.8 177 35,400 708 321
3
⁄8 10 200 8.0 3.6 177 35,400 1,416 642
1
⁄2 15 150 9.0 4.1 177 26,550 1,593 723
3
⁄4 20 100 8.0 3.6 177 17,700 1,416 642
1 25 50 7.0 3.2 177 8,850 1,239 562
11⁄4 32 200 42 19 27 5,400 1,134 514
11⁄2 40 120 29 13 27 3,240 778 353
2 50 100 40 18 27 2,700 1,080 490
Extension Piece: Fig. 1137 (Pg. pf-67)
3
⁄8 10 50 5.0 2.3 27 1,350 135 61
1
⁄2 15 40 6.0 2.7 177 7,080 1,062 482
3
⁄4 20 240 62 28 27 6,480 1,685 764
1 25 120 50 23 27 3,240 1,361 617
1
⁄2† 15 24 9.0 4.1 177 4,248 1,529 694
3
⁄4† 20 120 65 29 27 3,240 1,750 794
1† 25 60 51 23 27 1,620 1,377 625
11⁄4† 32 40 60 27 27 1,080 1,620 735
11⁄2† 40 24 49 22 27 648 1,335 606
2† 50 16 53 24 27 432 1,443 655
PF – 130
Palleted
▲Wt./
Pcs./Carton pallet
Cartons Pcs
90° Elbow: Fig. 1161 (Pg. pf-68)
1
⁄4 8 40 8.0 3.6 177 7,080 1,416 642
3
⁄8 10 30 9.0 4.1 177 5,310 1,540 699
1
⁄2 15 160 75 34 27 4,320 2,030 921
3
⁄4 20 80 53 24 27 2,160 1,426 647
1 25 60 69 31 27 1,620 1,863 845
11⁄4 32 26 49 22 27 702 1,327 602
11⁄2 40 20 49 22 27 540 1,334 605
2 50 12 45 20 27 324 1,228 557
21⁄2 65 6 39 18 27 162 1,055 479
3 80 4 40 18 27 108 1,075 488
90° Reducing Elbow: Figure 1161R (Pg. pf-68)
3
⁄8 x 1⁄4† 10 x 8 50 13 5.9 27 1,350 351 159
1
⁄2 x 3⁄8† 15 x 10 50 21 10 27 1,350 554 251
3
⁄4 x 1⁄2 20 x 15 40 25 11 27 1,080 670 304
1 x 1⁄2 25 x 15 40 35 16 27 1,080 940 426
1 x 3⁄4† 25 x 20 40 40 18 27 1,080 1,080 490
11⁄4 x 3⁄4† 32 x 20 30 42 19 27 810 1,142 518
1
1 ⁄4 x 1† 32 x 25 30 48 22 27 810 1,296 588
1
1 ⁄2 x 1† 40 x 25 20 38 17 27 540 1,021 463
1 1
1 ⁄2 x 1 ⁄4† 40 x 32 20 43 20 27 540 1,161 527
1
2 x 1 ⁄4† 50 x 32 10 31 14 27 270 842 382
1
2 x 1 ⁄2† 50 x 40 10 33 15 27 270 891 404
45° Elbow: Fig. 1162 (Pg. pf-69)
1
⁄4 8 50 10.0 4.5 177 8,850 1,682 763
3
⁄8 10 30 8.0 3.6 177 5,310 1,487 674
1
⁄2 15 20 9.0 4.1 177 3,540 1,522 690
3
⁄4 20 96 63 29 27 2,592 1,711 776
1 25 60 60 27 27 1,620 1,620 735
11⁄4 32 30 50 23 27 810 1,353 614
11⁄2 40 22 47 21 27 594 1,277 579
2 50 12 41 19 27 324 1,102 500
21⁄2 65 8 44 20 27 216 1,190 540
3 80 6 49 22 27 162 1,312 595
4† 100 3 40 18 27 81 1,086 493
Cap: Fig. 1163 (Pg. pf-71)
1
⁄4 8 120 12 5.4 177 21,240 2,124 963
3
⁄8 10 75 11 5.0 177 13,275 1,991 903
1
⁄2 15 30 7.0 3.2 177 5,310 1,221 554
3
⁄4 20 24 8.0 3.6 177 4,248 1,487 674
1 25 120 70 32 27 3,240 1,879 852
11⁄4 32 80 75 34 27 2,160 2,030 921
11⁄2 40 40 47 21 27 1,080 1,274 578
2 50 32 62 28 27 864 1,676 760
21⁄2 65 20 66 30 27 540 1,793 813
3 80 16 75 34 27 432 2,035 923

PF – 131
Palleted
▲Wt./
Pcs./Carton pallet
Cartons Pcs
Straight Tee: Fig. 1164(Pg. pf-70)
1
⁄4 8 30 8.0 3.6 177 5,310 1,434 650
3
⁄8 10 20 8.0 3.6 177 3,540 1,487 674
1
⁄2 15 100 65 29 27 2,700 1,755 796
3
⁄4 20 60 64 29 27 1,620 1,733 786
1 25 40 65 29 27 1,080 1,750 794
11⁄4 32 20 50 23 27 540 1,345 610
11⁄2 40 14 48 22 27 378 1,285 583
2 50 10 52 24 27 270 1,404 637
21⁄2 65 4 34 15 27 108 909 412
3 80 4 50 23 27 108 1,347 611
Reducing Tee: Fig. 1164R (Pg. pf-70)
3
⁄8 x 3⁄8 x 1⁄4† 10 x 10 x 8 120 44 20 27 3,240 1,231 558
1
⁄2 x 1⁄2 x 1⁄4† 15 x 15 x 8 104 50 23 27 2,808 1,226 556
1
⁄2 x 1⁄2 x 3⁄4† 15 x 15 x 20 52 42 19 27 1,404 1,264 573
3
⁄4 x 1⁄2 x 3⁄4 20 x 15 x 20 52 48 22 27 1,404 1,215 551
3
⁄4 x 3⁄4 x 1⁄4 20 x 20 x 8 60 46 21 27 1,620 913 414
3
⁄4 x 3⁄4 x 3⁄8† 20 x 20 x 10 52 42 19 27 1,404 1,196 542
3
⁄4 x 3⁄4 x 1⁄2† 20 x 20 x 15 52 47 21 27 1,404 1,242 563
3 3
1 x ⁄4 x ⁄4† 25 x 20 x 20 40 51 23 27 1,080 1,037 470
1
1 x ⁄2 x 1† 25 x 15 x 25 36 49 22 27 972 1,348 611
3
1 x ⁄4 x 1 25 x 20 x 25 36 50 23 27 972 1,306 592
1
1 x 1 x ⁄4† 25 x 25 x 8 36 39 18 27 972 1,322 600
1
1 x 1 x ⁄2 25 x 25 x 15 40 50 23 27 1,080 1,341 608
1 x 1 x 3⁄4† 25 x 25 x 20 40 53 24 27 1,080 1,361 617
1
1 ⁄4 x 1 x 1† 32 x 25 x 25 28 54 24 27 756 1,361 617
1 1 1
1 ⁄4 x 1 ⁄4 x ⁄2 32 x 32 x 15 30 51 23 27 810 1,328 602
11⁄4 x 11⁄4 x 3⁄4 32 x 32 x 20 24 46 21 27 648 1,482 672
11⁄4 x 11⁄4 x 1 32 x 32 x 25 24 50 23 27 648 1,372 622
11⁄2 x 11⁄2 x 1⁄2 40 x 40 x 15 20 45 20 27 540 1,436 651
11⁄2 x 11⁄2 x 3⁄4 40 x 40 x 20 20 49 22 27 540 1,452 659
11⁄2 x 11⁄2 x 1 40 x 40 x 25 18 47 21 27 486 1,377 625
11⁄2 x 11⁄2 x 11⁄4† 40 x 40 x 32 18 55 25 27 486 1,542 699
2 x 11⁄2 x 2† 50 x 40 x 50 10 45 20 27 270 1,367 620
2 x 2 x 1⁄2 50 x 50 x 15 10 34 15 27 270 1,372 622
2 x 2 x 3⁄4 50 x 50 x 20 16 57 26 27 432 – –
2x2x1 50 x 50 x 25 12 44 20 27 324 – –
2 x 2 x 11⁄4 50 x 50 x 32 12 51 23 27 324 – –
2 x 2 x 11⁄2 50 x 50 x 40 10 46 21 27 270 – –
1 1 1
2 ⁄2 x 2 ⁄2 x 1 ⁄2† 65 x 65 x 40 8 51 23 27 216 – –
3x3x2 80 x 80 x 50 4 38 17 27 108 – –
Cross: Fig. 1165 (Pg. pf-69)
3
⁄8† 10 80 37 17 27 2,160 994 451
3
⁄4 20 50 63 29 27 1,350 1,688 766
1† 25 26 49 22 27 702 1,334 605
11⁄4† 32 16 52 24 27 432 1,395 633
11⁄2† 40 12 50 23 27 324 1,361 617
2† 50 6 39 18 27 162 1,051 477

PF – 132
Palleted
▲Wt./
Pcs./Carton pallet
Cartons Pcs
1
⁄4 8 60 10.0 4.5 177 10,620 1,805 819
3
⁄8 10 20 5.0 2.3 177 3,540 920 417
1
⁄2 15 20 8.0 3.6 177 3,540 1,416 642
3
⁄4 20 96 62 28 27 2,592 1,685 764
1 25 64 63 29 27 1,728 1,711 776
11⁄4 32 30 49 22 27 810 1,325 601
11⁄2 40 24 49 22 27 648 1,315 596
2 50 16 52 24 27 432 1,400 635
21⁄2 65 10 55 25 27 270 1,472 668
3 80 6 44 20 27 162 1,183 537
Reducer: Fig. 1167 (Pg. pf-71)
3
⁄8 x 1⁄4 10 x 8 48 10.0 4.5 177 8,496 1,784 809
1
⁄2 x 1⁄4 15 x 8 24 15 6.8 177 4,248 2,634 1,195
1
⁄2 x 3⁄8 15 x 10 24 16 7.3 177 4,248 2,889 1,310
3
⁄4 x 1⁄4 20 x 8 90 41 19 27 2,430 1,118 507
3
⁄4 x 3⁄8 20 x 10 90 42 19 27 2,430 1,142 518
3
⁄4 x 1⁄2 20 x 15 90 45 20 27 2,430 1,215 551
1
1 x ⁄4 25 x 8 60 40 18 27 1,620 1,069 485
3
1 x ⁄8 25 x 10 80 57 26 27 2,160 1,534 696
1
1 x ⁄2 25 x 15 80 57 26 27 2,160 1,534 696
3
1 x ⁄4 25 x 20 60 46 21 27 1,620 1,247 566
1 1
1 ⁄4 x ⁄2 32 x 15 44 49 22 27 1,188 1,331 604
1 3
1 ⁄4 x ⁄4 32 x 20 48 56 25 27 1,296 1,503 682
1
1 ⁄4 x 1 32 x 25 48 61 28 27 1,296 1,646 747
1 1
1 ⁄2 x ⁄2 40 x 15 32 48 22 27 864 1,305 592
1 3
1 ⁄2 x ⁄4 40 x 20 40 63 29 27 1,080 1,696 769
11⁄2 x 1 40 x 25 32 52 24 27 864 1,400 635
11⁄2 x 11⁄4 40 x 32 32 57 26 27 864 1,538 698
2 x 1⁄2† 50 x 15 24 57 26 27 648 1,549 703
2 x 3⁄4 50 x 20 20 49 22 27 540 1,318 598
2x1 50 x 25 18 46 21 27 486 1,234 560
2 x 11⁄4 50 x 32 12 30 14 27 324 822 373
2 x 11⁄2 50 x 40 20 54 24 27 540 1,469 666
1 1
2 ⁄2 x 1 ⁄2 65 x 40 8 33 15 27 216 883 401
1
2 ⁄2 x 2 65 x 50 10 43 20 27 270 1,166 529
3 x 11⁄2† 80 x 40 8 46 21 27 216 1,251 567
3x2 80 x 50 8 47 21 27 216 1,259 571
3 x 21⁄2 80 x 65 8 52 24 27 216 1,393 632
4 x 2† 100 x 50 4 38 17 27 108 1,026 465
4x3 100 x 80 4 40 18 27 108 1,080 490

PF – 133
Palleted
▲Wt./
Pcs./Carton pallet
Cartons Pcs
90° Streed Elbow: Fig. 1170 (Pg. pf-69)
1
⁄4 8 60 10.0 4.5 177 10,620 1,805 819
3
⁄8 10 30 8.0 3.6 177 5,310 1,381 626
1
⁄2 15 160 75 34 27 4,320 2,030 921
3
⁄4 20 100 68 31 27 2,700 1,836 833
1 25 60 62 28 27 1,620 1,685 764
11⁄4 32 30 48 22 27 810 1,296 588
11⁄2 40 20 44 20 27 540 1,188 539
2 50 8 29 13 27 216 775 352
3 80 4 38 17 27 108 1,031 468
Floor Flange: Fig. 1190 (Pg. pf-64)
1
⁄2 15 120 66 30 27 3,240 1,779 807
3
⁄4 20 80 43 20 27 2,160 1,166 529
1 25 60 46 21 27 1,620 1,231 558
11⁄4 32 50 45 20 27 1,350 1,215 551
11⁄2 40 40 48 22 27 1,080 1,296 588
2 50 30 60 27 27 810 1,610 730

PF – 134
Palleted
Cast Iron Fittings
▲Wt./
Size Sold Box ▲Wt./Carton No. No.
Pcs./Carton pallet
Only Cartons Pcs
90° Elbow: Fig.351 (Pg. pf-76)
1
⁄2 15 150 ❏ blk 57 26 39 5,850 2,223 1,008
3
⁄4† 20 100 ❏ blk 62 28 39 3,900 2,418 1,097
1 25 45 ❏ blk 43 20 39 1,755 1,667 756
11⁄4† 32 25 ❏ blk 37 17 39 975 1,433 650
11⁄2† 40 15 ❏ blk 29 13 39 585 1,129 512
2 50 20 ❏ blk 61 28 20 400 1,212 550
Reducing Elbow: Fig.352 (Pg. pf-78)
3 1
⁄4 x ⁄2† 20 x 15 120 59 27 39 4,680 2,293 1,040
1 x 1⁄2† 25 x 15 70 ❏ blk 43 20 39 2,730 1,693 768
1 x 3⁄4† 25 x 20 70 ❏ blk 55 25 39 2,730 2,129 966
1
1 ⁄4 x ⁄2† 1
32 x 15 55 ❏ blk 52 24 39 2,145 2,016 914
11⁄4 x 3⁄4† 32 x 20 50 ❏ blk 55 25 39 1,950 2,126 964
11⁄4 x 1† 32 x 25 40 ❏ blk 47 21 39 1,560 1,825 828
11⁄2 x 1† 40 x 25 30 ❏ blk 44 20 39 1,170 1,708 775
1
1 ⁄2 x 1 ⁄4† 1
40 x 32 25 ❏ blk 44 20 39 975 1,697 770
2 x 11⁄4† 50 x 32 25 ❏ blk 56 25 20 500 1,125 510
2 x 11⁄2† 50 x 40 25 ❏ blk 65 29 20 500 1,295 587
45° Elbow: Fig.356 (Pg. pf-77)
1
⁄2† 15 150 56 25 39 5,850 2,165 982
3
⁄4 20 100 55 25 39 3,900 2,145 973
1 25 60 ❏ blk 51 23 39 2,340 1,989 902
11⁄4† 32 35 48 22 39 1,365 1,856 842
1
1 ⁄2† 40 25 45 20 39 975 1,745 792
2† 50 20 ❏ blk 56 25 20 400 1,120 508
Tee: Fig.358 (Pg. pf-77)
1
⁄2† 15 100 54 24 39 3,900 2,106 955
3
⁄4 20 60 50 23 39 2,340 1,966 892
1 25 30 ❏ blk 39 18 39 1,170 1,521 690
11⁄4† 32 20 ❏ blk 41 19 39 780 1,583 718
11⁄2† 40 20 ❏ blk 51 23 20 400 1,020 463
2† 50 10 ❏ blk 42 19 20 200 832 377

PF – 135
Palleted
Cast Iron Fittings
▲Wt./
Pcs./Carton pallet
Only Cartons Pcs
Reducing Tee: Fig.359 (Pg. pf-79-84)
3 3 1
⁄4 x ⁄4 x ⁄2† 20 x 20 x 15 70 53 24 39 2,730 2,075 941
1 x 1⁄2 x 1† 25 x 15 x 25 45 ❏ blk 46 21 39 1,755 1,808 820
1 x 3⁄4 x 3⁄4† 25 x 20 x 20 50 49 22 39 1,950 1,911 867
1 x 1 x ⁄2† 1
25 x 25 x 15 50 ❏ blk 49 22 39 1,950 1,892 858
1 x 1 x 3⁄4† 25 x 25 x 20 45 50 23 20 900 999 453
1 x 1 x 11⁄4† 25 x 25 x 32 20 ❏ blk 31 14 39 780 1,217 552
11⁄4 x 1⁄2 x 11⁄4† 32 x 15 x 32 25 40 18 39 975 1,550 703
1 3 1
1 ⁄4 x ⁄4 x 1 ⁄4† 32 x 20 x 32 25 43 20 39 975 1,667 756
11⁄4 x 1 x 1⁄2† 32 x 25 x 15 35 ❏ blk 43 20 39 1,365 1,679 762
11⁄4 x 1 x 3⁄4† 32 x 25 x 20 30 41 19 20 600 810 367
1
1 ⁄4 x 1 x 1† 32 x 25 x 25 20 ❏ blk 31 14 39 780 1,193 541
11⁄4 x 1 x 11⁄4† 32 x 25 x 32 20 ❏ blk 35 16 39 780 1,373 623
11⁄4 x 11⁄4 x 1⁄2 32 x 32 x 15 30 ❏ blk 43 20 39 1,170 1,685 764
11⁄4 x 11⁄4 x 3⁄4† 32 x 32 x 20 25 ❏ blk 40 18 20 500 790 358
1 1
1 ⁄4 x 1 ⁄4 x 1† 32 x 32 x 25 20 ❏ blk 35 16 39 780 1,373 623
11⁄2 x 1⁄2 x 11⁄2† 40 x 15 x 40 20 ❏ blk 42 19 20 400 840 381
11⁄2 x 11⁄4 x 1⁄2† 40 x 32 x 15 25 ❏ blk 42 19 39 975 1,628 738
11⁄2 x 11⁄4 x 3⁄4† 40 x 32 x 20 20 ❏ blk 36 16 20 400 712 323
1 1
1 ⁄2 x 1 ⁄4 x 1† 40 x 32 x 25 20 ❏ blk 38 17 39 780 1,490 676
11⁄2 x 11⁄4 x 11⁄4† 40 x 32 x 32 20 ❏ blk 46 21 39 780 1,802 817
11⁄2 x 11⁄2 x 1⁄2† 40 x 40 x 15 20 ❏ blk 37 17 39 780 1,435 651
1 1
1 ⁄2 x 1 ⁄2 x ⁄4† 3
40 x 40 x 20 20 ❏ blk 38 17 39 780 1,498 679
1 1
1 ⁄2 x 1 ⁄2 x 1† 40 x 40 x 25 30 ❏ blk 64 29 20 600 1,272 577
11⁄2 x 11⁄2 x 11⁄4† 40 x 40 x 32 25 ❏ blk 59 27 20 500 1,185 538
11⁄2 x 11⁄2 x 2† 40 x 40 x 50 10 ❏ blk 31 14 39 390 1,209 548
1
2 x ⁄2 x 2† 50 x 15 x 50 10 33 15 20 200 660 299
3
2 x ⁄4 x 2† 50 x 20 x 50 15 50 23 20 300 993 450
2 x 1 x 2† 50 x 25 x 50 15 ❏ blk 50 23 20 300 990 449
2 x 11⁄4 x 2† 50 x 32 x 50 15 ❏ blk 52 24 20 300 1,047 475
2 x 11⁄2 x 1⁄2 50 x 40 x 15 25 ❏ blk 57 26 20 500 1,145 519
1
2 x 1 ⁄2 x 1† 50 x 40 x 25 20 ❏ blk 53 24 20 400 1,056 479
2 x 11⁄2 x 11⁄2† 50 x 40 x 40 15 47 21 20 300 945 429
2 x 11⁄2 x 2† 50 x 40 x 50 15 ❏ blk 55 25 20 300 1,107 502
2 x 2 x 1⁄2† 50 x 50 x 15 20 ❏ blk 53 24 20 400 1,064 483
2 x 2 x ⁄4† 3
50 x 50 x 20 20 ❏ blk 57 26 20 400 1,144 519
2 x 2 x 1† 50 x 50 x 25 15 ❏ blk 46 21 20 300 915 415
2 x 2 x 11⁄4† 50 x 50 x 32 15 ❏ blk 51 23 20 300 1,014 460
2 x 2 x 11⁄2† 50 x 50 x 40 15 ❏ blk 55 25 20 300 1,095 497
Hex Coupling: Fig.366 (Pg. pf-87)
1† 25 60 53 24 39 2,340 2,059 934

PF – 136
Palleted
Cast Iron Fittings
▲Wt./
Pcs./Carton pallet
Only Cartons Pcs
Reducer: Fig.367 (Pg. pf-88)
1 x ⁄2† 1
25 x 15 80 ❏ blk 48 22 39 3,120 1,872 849
1 x 3⁄4† 25 x 20 70 ❏ blk 48 22 39 2,730 1,856 842
Hex Bushing: Fig.383 (Pg. pf-89)
1 1
1 ⁄2 x ⁄4 40 x 8 50 22 10 48 2,400 1,056 479
11⁄2 x 3⁄8 40 x 10 50 20 9.1 48 2,400 960 435
11⁄2 x 1⁄2 40 x 15 50 ❏ blk 21 10 48 2,400 1,008 457
11⁄2 x 3⁄4 40 x 20 50 ❏ 23 10 48 2,400 1,080 490
1
1 ⁄2 x 1 40 x 25 50 ❏ 25 11 48 2,400 1,200 544
2 x 1⁄4 50 x 8 30 19 8.6 48 1,440 893 405
2 x 3⁄8 50 x 10 30 20 9.1 48 1,440 979 444
2 x ⁄2 1
50 x 15 30 ❏ blk 18 8.2 48 1,440 864 392
2 x 3⁄4 50 x 20 30 ❏ 21 10 48 1,440 994 451
2x1 50 x 25 30 ❏ 22 10 48 1,440 1,066 484
2 x 11⁄4 50 x 32 30 ❏ 24 11 48 1,440 1,138 516
Square Head Plugs (Cored): Fig.387 (Pg. pf-91)
3
⁄4 20 240 ❏ blk 36 16 48 11,520 1,728 784
1 25 120 ❏ 30 14 48 5,760 1,440 653
11⁄4 32 60 ❏ 25 11 48 2,880 1,181 536
11⁄2 40 50 ❏ 27 12 48 2,400 1,272 577
2 50 30 ❏ 27 12 48 1,440 1,282 582
Square Head Plugs (Solid): Fig.388 (Pg. pf-91)
1
⁄2 15 300 ❏ blk 33 15 48 14,400 1,584 718
3
⁄4 20 240 41 19 48 11,520 1,958 888
1 25 120 ❏ blk 38 17 48 5,760 1,843 836
1
1 ⁄4 32 60 27 12 48 2,880 1,272 577
1
1 ⁄2 40 50 38 17 48 2,400 1,824 827
2 50 30 37 17 48 1,440 1,786 810
Bar Plugs (Countersunk): Fig.390 (Pg. pf-91)
1 25 120 23 10 48 5,760 1,094 496
11⁄4 32 60 19 8.6 48 2,880 922 418
1
1 ⁄2 40 50 24 11 48 2,400 1,128 512
2 50 30 25 11 48 1,440 1,210 549
Floor Flange: Fig.1006 (Pg. pf-90)
1
⁄2 15 90 52 24 39 3,510 2,036 924
3
⁄4 20 90 64 29 39 3,510 2,492 1,130
1 25 60 62 28 39 2,340 2,434 1,104
11⁄2 40 35 49 22 39 1,365 1,897 860
11⁄4 32 50 51 23 39 1,950 1,989 902

PF – 137
Cartons
Steel Pipe Nipples
Cartons Pallets Cartons Pallets

Size Size
Weight Weight
Pcs. Cartons Pcs. Cartons
NPS DN Lbs Kg NPS DN Lbs Kg
Close Close Close 3.5 Close Close Close 22
2 50 23 5.5 3 80 36 25.25
21⁄2 65 29 7.0 31⁄2 90 41 33.5
3 80 36 9.0 4 100 45 37.0
1
3 ⁄2 90 41 11.0 41⁄2 114 52 33.6
4 100 45 12.75 5 125 57 39.0
1
1
4 ⁄2 114 52 14.5 5 ⁄2 140 64 32.7
21⁄2 65
5 125 57 16.25 6 150 68 37.8
11⁄4 32 1 7 175 79 30.7
5 ⁄2 140 64 17.75
6 150 68 20.0 8 200 91 35.10
7 175 79 22.5 9 225 102 39.0
8 200 91 27.0 10 250 113 22.55
9 225 102 30.0 11 279 127 24.1
10 250 113 13.8 12 300 136 27.5
11 279 127 14.6 Close Close Close 30.50
12 300 136 16.0 3 80 36 33.50
Close Close Close 7.75 31⁄2 90 41 34.0
2 50 23 9.25 4 100 45 39.60
21⁄2 65 29 11.5 41⁄2 114 52 32.70
3 80 36 14.5 5 125 57 26.50
1
3 ⁄2 90 41 17.5 51⁄2 140 64 29.60
3 80
4 100 45 20.0 6 150 68 34.0
1
4 ⁄2 114 52 21.75 7 175 79 38.60
5 125 57 24.75 8 200 91 22.70
11⁄2 40 9 225 102 26.25
51⁄2 140 64 27.5
10 250 113 28.55
6 150 68 30.75
11 279 127 32.30
7 175 79 35.25
12 300 136 34.45
8 200 91 16.1
9 225 102 19.3
10 250 113 21.3
11 279 127 22.8
12 300 136 25.7
Close Close Close 11.5
21⁄2 65 29 15.5
3 80 36 20.0
1
3 ⁄2 90 41 23.5
4 100 45 27.25
41⁄2 114 52 30.5
5 125 57 34.5
2 50 51⁄2 140 64 39.5
6 150 68 34.0
7 175 79 39.6
8 200 91 22.6
9 225 102 25.9
10 250 113 29.9
11 279 127 32.4
12 300 136 34.8
PF – 138
Master Containers for “25 packs”
Steel Pipe Nipples in “25 packs”
Standard/Sch. 40
inner Master
Diameter length Wt./ Wt./
pcs/ inner pcs/ master
inner master
NPS DN NPS DN lbs Kg lbs Kg
Close Close 25 0.50 0.23 450 9.0 4.1
11⁄2 40 25 0.75 0.34 450 14 6.1
2 50 25 1.00 0.45 450 18 8.2
21⁄2 65 25 1.3 0.57 450 23 10
3 80 25 1.5 0.68 450 27 12
31⁄2 90 25 1.8 0.79 450 32 14
4 100 25 2.0 0.91 450 36 16
41⁄2 114 25 2.3 1.0 200 18 8.2
1
⁄8 6 5 125 25 2.5 1.1 200 20 9.1
51⁄2 140 25 2.8 1.2 200 22 10
6 150 25 3.0 1.4 200 24 11
7 175 25 3.5 1.6 – – –
8 200 25 4.0 1.8 – – –
9 225 25 4.5 2.0 – – –
10 250 25 5.0 2.3 – – –
11 275 25 5.5 2.5 – – –
12 300 25 6.0 2.7 – – –
Close Close 25 0.50 0.23 450 9.0 4.1
11⁄2 40 25 1.00 0.45 450 18 8.2
2 50 25 1.5 0.68 450 27 12
21⁄2 65 25 2.0 0.91 450 36 16
3 80 25 2.5 1.1 400 40 18
31⁄2 90 25 3.0 1.4 325 39 18
4 100 25 3.3 1.5 300 39 18
41⁄2 114 25 3.8 1.7 200 30 14
1
⁄4 8 5 125 25 4.3 1.9 200 34 15
51⁄2 140 25 4.5 2.0 200 36 16
6 150 25 5.0 2.3 200 40 18
7 175 25 6.0 2.7 – – –
8 200 25 7.0 3.2 – – –
9 225 25 7.8 3.5 – – –
10 250 25 8.5 3.9 – – –
11 275 25 9.5 4.3 – – –
12 300 25 10 4.6 – – –
Close Close 25 1.00 0.45 450 18 8.2
11⁄2 40 25 1.5 0.68 450 27 12
2 50 25 2.0 0.91 450 36 16
21⁄2 65 25 2.5 1.1 400 40 18
3 80 25 3.3 1.5 200 26 12
31⁄2 90 25 3.8 1.7 200 30 14
4 100 25 4.5 2.0 200 36 16
3
10 41⁄2 114 25 5.0 2.3 200 40 18
⁄8
5 125 25 5.5 2.5 175 39 17
51⁄2 140 25 6.0 2.7 150 36 16
6 150 25 6.5 2.9 175 39 18
8 200 25 8.8 4.0 – – –
9 225 25 9.8 4.4 – – –
10 250 25 12 5.4 – – –
11 275 25 12 5.6 – – –
12 300 25 14 6.1 – – –
Standard+ welded steel (black and galvanized▲) • sizes .125 to 3 NPS (8 to 80 DN)+
Schedule 40 seamless steel pressure pipe (black only) • sizes .125 to 1.5 NPS (8 to 40 DN) ▲
Schedule 40 seamless steel pipe (black only) • sizes 2 to 3 NPS (50 to 80 DN) ▲
PF – 139
Standard/Sch. 40 (cont.)
inner Master
inner master
Close Close 25 1.5 0.68 450 27 12
11⁄2 40 25 2.0 0.91 200 16 7.3
2 50 25 2.8 1.2 200 22 10
21⁄2 65 25 3.5 1.6 200 28 13
3 80 25 4.5 2.0 200 36 16
31⁄2 90 25 5.5 2.5 – – –
4 100 25 6.3 2.8 – – –
41⁄2 114 25 7.3 3.3 – – –
1
⁄2 15 5 125 25 8.0 3.6 – – –
51⁄2 140 25 9.3 4.2 – – –
6 150 25 9.8 4.4 – – –
7 175 25 12 5.2 – – –
8 200 25 13 5.9 – – –
9 225 25 16 7.0 – – –
10 250 25 17 7.5 – – –
11 275 25 19 8.4 – – –
12 300 25 20 9.1 – – –
Close Close 25 2.5 1.1 200 20 9.1
11⁄2 40 25 2.8 1.2 200 22 10
2 50 25 4.0 1.8 200 32 15
21⁄2 65 25 5.0 2.3 – – –
3 80 25 6.3 2.8 – – –
31⁄2 90 25 7.8 3.5 – – –
4 100 25 8.8 4.0 – – –
41⁄2 114 25 9.8 4.4 – – –
3
⁄4 20 5 125 25 12 5.2 – – –
51⁄2 140 25 12 5.4 – – –
6 150 25 14 6.4 – – –
7 175 25 16 7.0 – – –
8 200 25 18 8.1 – – –
9 225 25 21 9 – – –
10 250 25 22 10 – – –
11 275 25 25 11 – – –
12 300 25 28 13 – – –
Close Close 25 3.5 1.6 200 28 13
– – – – – – – –
2 50 25 5.5 2.5 175 39 17
21⁄2 65 25 7.0 3.2 – – –
3 80 25 9.0 4.1 – – –
31⁄2 90 25 11 5.0 – – –
4 100 25 13 5.8 – – –
41⁄2 114 25 15 6.6 – – –
1 25 5 125 25 16 7.4 – – –
51⁄2 140 25 18 8.1 – – –
6 150 25 20 9.1 – – –
7 175 25 23 10 – – –
8 200 25 27 12 – – –
9 225 25 30 14 – – –
10 250 25 35 16 – – –
11 275 25 37 17 – – –
12 300 25 40 18 – – –
PF – 140
inner Master
inner master
Close Close 25 3.5 1.6 – – –
– – – 00– 00– – – –
2 50 25 5.5 2.5 – – –
21⁄2 65 25 7.0 3.2 – – –
3 80 25 9.0 4.1 – – –
31⁄2 90 25 11 5.0 – – –
4 100 25 13 5.8 – – –
41⁄2 114 25 15 6.6 – – –
11⁄4 32 5 125 25 16 7.4 – – –
51⁄2 140 25 18 8.1 – – –
6 150 25 20 9.1 – – –
7 175 25 23 10 – – –
8 200 25 27 12 – – –
9 225 25 30 14 – – –
10 250 10 14 6.3 – – –
11 275 10 15 6.6 – – –
12 300 10 16 7.3 – – –
Close Close 25 7.8 3.5 – – –
– – – 00– 00– – – –
2 50 25 9.3 4.2 – – –
21⁄2 65 25 12 5.2 – – –
3 80 25 15 6.6 – – –
31⁄2 90 25 18 7.9 – – –
4 100 25 20 9.1 – – –
41⁄2 114 25 22 10 – – –
11⁄2 40 5 125 25 25 11 – – –
51⁄2 140 25 28 12 – – –
6 150 25 31 14 – – –
7 175 25 35 16 – – –
8 200 25 16 7.3 – – –
9 225 10 19 8.8 – – –
10 250 10 21 10 – – –
11 275 10 23 10 – – –
12 300 10 26 12 – – –
Close Close 25 12 5.2 – – –
– – – 00– 00– – – –
– – – 00– 00– – – –
21⁄2 65 25 16 7.0 – – –
3 80 25 20 9.1 – – –
31⁄2 90 25 24 11 – – –
4 100 25 27 12 – – –
41⁄2 114 25 31 14 – – –
2 50
5 125 25 35 16 – – –
51⁄2 140 25 40 18 – – –
6 150 20 34 15 – – –
7 175 20 40 18 – – –
8 200 10 23 10 – – –
9 225 10 26 12 – – –
10 250 10 30 14 – – –
11 275 10 32 15 – – –
PF – 141
inner Master
inner master
Close Close 25 22 10 – – –
3 80 25 25 11 – – –
31⁄2 90 25 34 15 – – –
4 100 25 37 17 – – –
41⁄2 114 20 34 15 – – –
5 125 20 39 18 – – –
51⁄2 140 15 33 15 – – –
21⁄2 2.5
6 150 15 38 17 – – –
7 175 10 31 14 – – –
8 200 10 35 16 – – –
9 225 10 39 18 – – –
10 250 5 23 10 – – –
11 275 5 24 11 – – –
12 300 5 28 12 – – –
Close Close 25 31 14 – – –
3 80 25 34 15 – – –
31⁄2 90 20 34 15 – – –
4 100 20 40 18 – – –
41⁄2 114 15 33 15 – – –
5 125 10 27 12 – – –
51⁄2 140 10 30 13 – – –
3 80 6 150 10 34 15 – – –
7 175 10 39 18 – – –
8 200 5 23 10 – – –
9 225 5 26 12 – – –
10 250 5 29 13 – – –
11 275 5 32 15 – – –
12 300 5 34 16 – – –
12 300 10 35 16 – – –
Notes:
■
■ Some lengths of 2, 2.5 and 3 NPS (60, 65 and 80 DN) nipples are packed less than 25 pieces to a carton as indicated under “no. of
pieces.”
▲ Weights shown are for black nipples.
▲ Schedule 40 and 80 nipples cartoned only in lengths close to 6-inch. (150 DN)
+ Extra Strong galvanized welded nipples cartoned only in pipe sizes .5 – 2 NPS (15 to 50 DN) and lengths close to 6 NPS.
PF – 142
XS/Sch. 80
inner Master
inner master
Close Close 25 .5 .5 450 9.0 4.1
11⁄2 40 25 1.00 0.45 450 18 8.2
2 50 25 1.3 0.57 450 23 10
21⁄2 65 25 1.5 0.68 450 27 12
3 80 25 2.0 0.91 450 36 16
31⁄2 90 25 2.3 1.0 200 38 17
4 100 25 2.5 1.1 200 40 18
41⁄2 114 25 3.0 1.4 200 24 11
1
⁄8 6 5 125 25 3.3 1.5 200 26 12
51⁄2 140 25 3.5 1.6 200 28 13
6 150 25 4.0 1.8 200 32 15
7 175 25 4.5 2.0 – – –
8 200 25 5.3 2.4 – – –
9 225 25 5.8 2.6 – – –
10 250 25 6.5 2.9 – – –
11 275 25 7.0 3.2 – – –
12 300 25 7.8 3.5 – – –
Close Close 25 1.00 0.45 450 18 8.2
11⁄2 40 25 1.5 0.68 450 27 12
2 50 25 2.0 0.91 450 36 16
21⁄2 65 25 2.5 1.1 200 40 18
3 80 25 3.3 1.5 200 39 18
31⁄2 90 25 3.8 1.7 200 38 17
4 100 25 4.5 2.0 200 36 16
41⁄2 114 25 5.0 2.3 – – –
1
⁄4 8 5 125 25 5.5 2.5 – – –
51⁄2 140 25 6.3 2.8 – – –
6 150 25 7.0 3.2 – – –
7 175 25 8.0 3.6 – – –
8 200 25 8.8 4.0 – – –
9 225 25 10.0 4.5 – – –
10 250 25 11 5.0 – – –
11 275 25 12 5.4 – – –
12 300 25 13 6.0 – – –
Close Close 25 1.3 0.57 450 23 10
11⁄2 40 25 2.0 0.91 450 36 16
2 50 25 3.0 1.4 200 39 18
21⁄2 65 25 3.5 1.6 200 39 17
3 80 25 4.5 2.0 200 36 16
31⁄2 90 25 5.3 2.4 – – –
4 100 25 6.0 2.7 – – –
41⁄2 114 25 6.5 2.9 – – –
3
⁄8 10 5 125 25 7.3 3.3 – – –
51⁄2 140 25 8.0 3.6 – – –
6 150 25 8.8 4.0 – – –
7 175 25 11 4.8 – – –
8 200 25 12 5.4 – – –
9 225 25 14 6.1 – – –
10 250 25 15 6.8 – – –
11 275 25 17 7.5 – – –
12 300 25 18 8.2 – – –
PF – 143
XS/Sch. 80 (cont.)
inner Master
inner master
Close Close 25 2.0 0.91 450 36 16
11⁄2 40 25 3.0 1.4 200 24 11
2 50 25 4.0 1.8 200 32 15
21⁄2 65 25 4.3 1.9 200 34 15
3 80 25 5.0 2.3 200 40 18
31⁄2 90 25 7.3 3.3 – – –
4 100 25 8.5 3.9 – – –
41⁄2 114 25 9.5 4.3 – – –
1
⁄2 15 5 125 25 11 4.8 – – –
51⁄2 140 25 12 5.4 – – –
6 150 25 13 5.9 – – –
7 175 25 15 6.9 – – –
8 200 25 18 7.9 – – –
9 225 25 20 9.0 – – –
10 250 25 22 10 – – –
11 275 25 25 11 – – –
12 300 25 27 12 – – –
Close Close 25 3.5 1.6 200 28 13
11⁄2 40 25 3.8 1.7 200 30 14
2 50 25 5.0 2.3 200 40 18
21⁄2 65 25 6.8 3.1 – – –
3 80 25 8.3 3.7 – – –
31⁄2 90 25 9.5 4.3 – – –
4 100 25 11 5.1 – – –
41⁄2 114 25 13 5.8 – – –
3
⁄4 20 5 125 25 15 6.6 – – –
51⁄2 140 25 16 7.3 – – –
6 150 25 17 7.7 – – –
7 175 25 21 9 – – –
8 200 25 24 11 – – –
9 225 25 27 12 – – –
10 250 25 30 14 – – –
11 275 25 33 15 – – –
12 300 25 36 16 – – –
Close Close 25 3.5 1.6 200 28 13
– – – – – – – –
2 50 25 5.5 2.5 – _ _
21⁄2 65 25 7.0 3.2 – – –
3 80 25 9.0 4.1 – – –
31⁄2 90 25 11 5.0 – – –
4 100 25 13 5.8 – – –
41⁄2 114 25 15 6.6 – – –
1 25 5 125 25 16 7.4 – – –
51⁄2 140 25 18 8.1 – – –
6 150 25 20 9.1 – – –
7 175 25 23 10 – – –
8 200 25 27 12 – – –
9 225 25 30 14 – – –
10 250 25 35 16 – – –
11 275 25 37 17 – – –
12 300 25 40 18 – – –
PF – 144
XS/Sch. 80 (cont.)
inner Master
inner master
Close Close 8.0 3.6 1.7 – – –
2 50 25 11 4.9 – – –
21⁄2 65 25 14 6.2 – – –
3 80 25 16 7.3 – – –
31⁄2 90 25 14 6.2 – – –
4 100 25 23 10 – – –
41⁄2 114 25 26 12 – – –
5 125 25 29 13 – – –
11⁄4 32
51⁄2 140 25 31 14 – – –
6 150 25 35 16 – – –
7 175 25 41 18 – – –
8 200 15 28 13 – – –
9 225 15 32 14 – – –
10 250 10 24 11 – – –
11 275 10 26 12 – – –
12 300 10 29 13 – – –
Close Close 25 11 5.1 – – –
2 50 25 13 5.7 – – –
21⁄2 65 25 16 7.4 – – –
3 80 25 20 9.0 – – –
31⁄2 90 25 25 11 – – –
4 100 25 28 12 – – –
41⁄2 114 25 32 14 – – –
5 125 25 35 16 – – –
11⁄2 40
51⁄2 140 25 38 17 – – –
6 150 20 33 15 – – –
7 175 20 39 18 – – –
8 200 10 23 10 – – –
9 225 10 26 12 – – –
10 250 10 29 13 – – –
11 275 10 32 14 – – –
12 300 10 35 16 – – –
Close Close 25 19 8.4 – – –
21⁄2 65 25 23 10 – – –
3 80 25 27 12 – – –
31⁄2 90 25 34 15 – – –
4 100 25 39 17 – – –
41⁄2 114 20 35 16 – – –
5 125 20 39 18 – – –
2 50 51⁄2 140 10 22 10 – – –
6 150 10 24 11 – – –
7 175 10 27 12 – – –
8 200 10 31 14 – – –
9 225 10 36 16 – – –
10 250 10 40 18 – – –
11 275 5 22 10 – – –
12 300 5 24 11 – – –
PF – 145
XS/Sch. 80 (cont.)
inner Master
inner master
Close Close 25 – – – – –
3 80 25 – – – – –
31⁄2 90 15 – – – – –
4 100 15 – – – – –
41⁄2 114 15 – – – – –
5 125 10 – – – – –
51⁄2 140 10 – – – – –
21⁄2 65
6 150 10 – – – – –
7 175 5 – – – – –
8 200 5 – – – – –
9 225 5 – – – – –
10 250 5 – – – – –
11 275 5 – – – – –
12 300 5 – – – – –
Close Close 25 – – – – –
– – – – – – – –
– – – – – – – –
3 80 25 – – – – –
31⁄2 90 20 – – – – –
4 100 20 – – – – –
41⁄2 114 15 – – – – –
5 125 10 – – – – –
3 80
51⁄2 140 10 – – – – –
6 150 10 – – – – –
7 175 10 – – – – –
8 200 5 – – – – –
9 225 5 – – – – –
10 250 5 – – – – –
11 275 5 – – – – –
12 300 5 – – – – –
extra strong+ welded steel (black and galvanized▲) • sizes .125 to 3 NPS+
schedule 80 seamless steel pressure pipe (black only) • sizes .125 to 1. 5 NPS▲
schedule 80 seamless steel pipe (black only) • sizes 2 to 3 NPS▲
Notes:
■
■ Some lengths of 2, 2. 5 and 3 NPS nipples are packed less than 25 pieces to a carton as indicated under “no. of pieces.”
▲ Weights shown are for black nipples.
▲ Schedule 40 and 80 nipples cartoned only in lengths close to 6-inch.
+ Extra Strong galvanized welded nipples cartoned only in pipe sizes . 5 – 2 NPS and lengths close to 6 NPS.
PF – 146
Nipple Assortments
standard Welded Nipples Only
(black and galvanized)
Single Packs
Length Number of Pieces Each for Size (NPS)
1 3
NPS DN ⁄ 2 (11) ⁄ 4 (11) 1 (10) 11⁄ 4 (10) 11⁄ 2 (10) 2 (9) 21⁄ 2 (8) 3 (8) 4 (6)
close close 1 1 1 1 1 1 1 1 1
11⁄2 40 1 1 – – – – – – –
2 50 1 1 1 1 1 – – – –
1
2 ⁄2 65 1 1 1 1 1 1 – – –
3 80 1 1 1 1 1 1 1 1 –
1
3 ⁄2 90 1 1 1 1 1 1 1 1 –
4 100 1 1 1 1 1 1 1 1 1
1
4 ⁄2 114 1 1 1 1 1 1 1 1 1
5 125 1 1 1 1 1 1 1 1 1
51⁄2 140 1 1 1 1 1 1 1 1 1
6 150 1 1 1 1 1 1 1 1 1
Assortment lbs 2.6 3.3 4.5 6.0 7.4 9.8 13 16 22

Weight DN 1.2 1.5 2.0 2.7 3.4 4.4 6.0 7.2 10
Assorted Cartons
Number of Pieces Each for Size (NPS)/(DN)
Size Weight Total 1
1 ⁄2 2 21⁄ 2 3 31⁄ 2 4 41⁄ 2 5 51⁄ 2 6
Pieces: close
NPS DN lbs Kg 40 50 65 80 90 100 114 125 140 150
4.6 2.1 25 4 3 3 3 2 2 2 1 2 1 2
1
⁄2 15 15 6.6 66 6 6 6 6 6 6 6 6 6 6 6
18 8.1 100 20 10 15 10 10 5 10 5 5 5 5
6.0 2.7 25 6 – 4 3 2 2 2 1 2 1 2
3
⁄4 20 20 9 66 6 6 6 6 6 6 6 6 6 6 6
23 10 100 25 – 20 10 10 5 10 5 5 5 5
9.8 4.4 25 5 – 5 3 2 2 2 1 2 1 2
1 25 27 12 60 6 – 6 6 6 6 6 6 6 6 6
28 13 75 15 – 12 5 12 3 12 3 5 3 5
13 6.0 25 6 – 4 3 2 2 2 1 2 1 2
11⁄4 32
38 17 60 6 – 6 6 6 6 6 6 6 6 6
16 7.1 25 6 – 4 3 2 2 2 1 2 1 2
11⁄2 40
38 17 50 5 – 5 5 5 5 5 5 5 5 5
2 50 39 18 36 4 – – 4 4 4 4 4 4 4 4
PF – 147
Notes
PF – 148
Standards and Specifications
Pressure
Dimensions Material Galvanizing Thread Federal/Other
Rating
M.I. Fittings
Class 150/PN 20 ASME B16.3• ASTM A-197 ASTM A-153 ASME B1 20.1+ ASME B16.3• ASME B16.3**
Class 300/PN 50 ASME B16.3• ASTM A-197 ASTM A-153 ASME B1 20.1+ ASME B16.3•
M.I. Unions
Class 150/PN 20 ASME B16.39• ASTM A-197 ASTM A-153 ASME B1 20.1+ ASME B16.39• ASME B16.39***
Class 250 ASME B16.39• ASTM A-197 ASTM A-153 ASME B1 20.1+ ASME B16.39•
Class 300/PN 50 ASME B16.39• ASTM A-197 ASTM A-153 ASME B1 20.1+ ASME B16.39•
Class 125 ASME B16.4• ASTM A-126 (A) ASTM A-153 ASME B1.20.1+ ASME B16.4• ASME B16.4■
Class 250 ASME B16.4• ASTM A-126 (A) ASTM A-153 ASME B1.20.1+ ASME B16.4• ASME B16.4■
C. 1. Plugs and Bushings
ASME B16.14• ASTM A- 126 (A) ASTM A-153 ASME B1.20.1+ ASME B16.14• WW-P-471
C. 1. Drainage Threaded Fittings
ASME B16.12• ASTM A-126 (A) ASTM A-153 ASME B1.20.1+ ASME B16.12•
C. 1. Flanges and Flanged Fittings
Class 125 (1"-12") ASME B16.1• ASTM A- 126 (A) or (B) ASTM A-153 ASME B1.20.1+ ASME B16.1 ASME B16.1•
Class 125 (14"-up) ASME B16.1• ASTM A-126 (B) ASTM A-153 ASME B1.20.1+ ASME B16.1 ASME B16.1•
Class 250 (11"-12") ASME B16.1• ASTM A- 126 (A) or (B) ASTM A-153 ASME B1.20.1+ ASME B16.1 ASME B16.1•
Class 250 (14"-up) ASME B16.1• ASTM A-126 (B) ASTM A-153 ASME B1.20.1+ ASME B16.1 ASME B16.1•
Forged Steel Threaded Fittings

ASTM Al05,
Class 2000, 3000,
ASME B16.11• ASTM A182, ASMEB1.20.1+ ASME B16.11•
6000
ASTM A350
Pipe Nipples
Steel Pipe ASTM A53
ASTM A733 ASME B1.20.1+ WWN 351
- Welded Type F or Type E
Steel Pipe
- Seamless ASTM A733 ASTM A106 Gr. B ASME B1.20.1+ WWN 351
(High Temp.)
Brass ASTM B43 ASME B1.20.1+ WWN 351
*The standard
•an American National standard (ANSI)
+ASME B1.20.1 was ANSI B2.1
■Formerly WW-P-501
**Formerly WW-P-521
***Formerly WW-U-531
PF – 149
Alphabetic Index

----------- a ------------- crosses, threaded . . . . . . . . . . . . . . . . . . . . . . . . . . . . ----------- l -------------
AAR steel couplings . . . . . . . . . . . . . . . . . . . . . . . . 52 cast iron Class 125 . . . . . . . . . . . . . . . . . 84-86 laterals, flanged. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adapter nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 forged steel . . . . . . . . . . . . . . . . . . . . 20-21, 23 cast iron Class 125 . . . . . . . . . . . . . . . . . . . 103
Anvilets, forged steel . . . . . . . . . . . . . . . . . . . . . 34-42 malleable iron Class 150 . . . . . . . . . . . . . . . . 65 laterals, threaded. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
buttweld . . . . . . . . . . . . . . . . . . . . . . . . . . 35-38 malleable iron Class 300 . . . . . . . . . . . . . . . . 69 cast iron Class 125 . . . . . . . . . . . . . . . . . . . . 86
socket-weld . . . . . . . . . . . . . . . . . . . . . . . 38-39 crosses, socket-welding . . . . . . . . . . . . . . . . . . . . . . . forged steel . . . . . . . . . . . . . . . . . . . . . . . 22, 24
threaded. . . . . . . . . . . . . . . . . . . . . . . . . . 40, 42 forged steel . . . . . . . . . . . . . . . . . . . . . . . 25, 27 malleable iron Class 150 . . . . . . . . . . . . . . . . 64
elbow anvilets . . . . . . . . . . . . . . . . . . . . . . . . 41 ----------- d ------------- laterals - socket-welding . . . . . . . . . . . . . . . . . . 26, 28
lateral anvilets . . . . . . . . . . . . . . . . . . . . . . . . 42 dart unions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 locknuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
API pipe line couplings . . . . . . . . . . . . . . . . . . . . . . 51 drainage fittings, cast iron. . . . . . . . . . . . . . . . . 94-98 cast iron. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
API thread standards . . . . . . . . . . . . . . . . . . . . . . . . 12 drilling templates . . . . . . . . . . . . . . . . . . . . . . . . . . . . malleable iron, hex . . . . . . . . . . . . . . . . . . . . 65
----------- b ------------- iron . . . . . . . . . . . . . . . . . . . . . . . . . . . 112-113 lug nut unions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Bell Nipple . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 ----------- e ------------- ----------- m ------------
bolts & nuts machine . . . . . . . . . . . . . . . . . . . . . . 111 elbows, flanged . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . male adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
branches, Y, cast iron drainage . . . . . . . . . . . . . 96-98 cast iron Class 125 . . . . . . . . . . . . . . . . 99-101 malleable iron pressure-temperature ratings . . . . . . 57
bushings, threaded . . . . . . . . . . . . . . . . . . . . . . . . . . . cast iron Class 250 . . . . . . . . . . . . . . . 105-106 malleable iron fittings . . . . . . . . . . . . . . . . . . . . . . . . .
cast iron Class 125 . . . . . . . . . . . . . . . . . 89-90 elbows, threaded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . extra heavy. . . . . . . . . . . . . . . . . . . . . . . . 68-71
forged steel . . . . . . . . . . . . . . . . . . . . . . . . . . 29 cast iron Class 125 . . . . . . . . . . . . . . . . . 76-78 plain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
merchant steel . . . . . . . . . . . . . . . . . . . . . . . . 53 cast iron Class 250 . . . . . . . . . . . . . . . . . . . . 92 standard. . . . . . . . . . . . . . . . . . . . . . . . . . 57-66
bull plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . cast iron drainage . . . . . . . . . . . . . . . . . . 94-96 malleable iron flanges . . . . . . . . . . . . . . . . . . . . . . . 64
carbon steel . . . . . . . . . . . . . . . . . . . . . . . . . . 11 forged steel . . . . . . . . . . . . . . . . . . . . 20-21, 23 malleable iron unions . . . . . . . . . . . . . . . . . . . . . 72-7
casing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 malleable iron Class 150 . . . . . . . . . . . . . 58-66 ----------- n -------------
tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 malleable iron Class 300 . . . . . . . . . . . . . 68-69 nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
bushings, high-pressure . . . . . . . . . . . . . . . . . . . . . 29 malleable iron . . . . . . . . . . . . . . . 58-60, 68-69 assortments . . . . . . . . . . . . . . . . . . . . . . . . . 147
----------- c ------------- malleable iron union . . . . . . . . . . . . . . . . . . . 73 casing . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-14
caps, threaded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . elbows, safety valve discharge . . . . . . . . . . . . . . . . 93 combination. . . . . . . . . . . . . . . . . . . . . . . . . . 55
cast iron Class 125 . . . . . . . . . . . . . . . . . . . . 91 elbows, socket-welding. . . . . . . . . . . . . . . . . . . . . . . . locknut. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
forged steel . . . . . . . . . . . . . . . . . . . . . . . 22, 24 forged steel . . . . . . . . . . . . . . . . . . . . . . . 25, 27 steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
malleable iron Class 150 . . . . . . . . . . . . . . . . 66 extension piece . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 swaged . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-10
malleable iron Class 300 . . . . . . . . . . . . . . . . 71 ----------- f ------------- tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
caps, socket-welding, forged steel . . . . . . . . . . 26, 28 figure number index . . . . . . . . . . . . . . . . . . . . . . . 152 tubbing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
cartons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . flange gaskets . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 nuts & bolts, machine . . . . . . . . . . . . . . . . . . . . . . 111
malleable iron . . . . . . . . . . . . . . . . . . . 116-121 flange unions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ---------- o, p - - - - - - - - - - - -
steel pipe nipples. . . . . . . . . . . . . . . . . . . . . 138 cast iron, threaded Class 125 . . . . . . . . . . . . 87 packs, 25. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
casing nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 flanged fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . standard/Sch. 40 . . . . . . . . . . . . . . . . . 139-142
cast iron fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . cast iron. . . . . . . . . . . . . . . . . . . . . . . . . 99-110 XS/Sch. 80 . . . . . . . . . . . . . . . . . . . . . 143-146
drainage. . . . . . . . . . . . . . . . . . . . . . . . . . 94-98 flanges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . palleted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
flanged. . . . . . . . . . . . . . 76, 87, 90, 93, 99-110 cast iron, Class 125 . . . . . . . . . . . . . . . 108-109 cast iron. . . . . . . . . . . . . . . . . . . . . . . . 135-137
threaded. . . . . . . . . . . . . . . . . . . . . . . . . 75-110 cast iron, Class 250 . . . . . . . . . . . . . . . . . . . 110 malleable iron . . . . . . . . . . . . . . . . . . . 122-134
cast iron flanges . . . . . . . . . . . . . . . . . . . . . . 108-110 malleable iron . . . . . . . . . . . . . . . . . . . 107-108 plain fittings, malleable iron . . . . . . . . . . . . . . . . . . 67
ceiling and floor plates . . . . . . . . . . . . . . . . . . . . . 114 floor flanges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . plugs, threaded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
coiling plates, iron & steel . . . . . . . . . . . . . . . . . . 114 cast iron. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 cast iron Class 125 . . . . . . . . . . . . . . . . . . . . 91
combination nipples . . . . . . . . . . . . . . . . . . . . . . . . 55 malleable iron . . . . . . . . . . . . . . . . . . . . . . . . 64 forged steel . . . . . . . . . . . . . . . . . . . . . . . . . . 29
conditions and terms of sale . . . . . . . . . . . . . . . . . 153 floor and ceiling plates . . . . . . . . . . . . . . . . . . . . . 114 merchant steel . . . . . . . . . . . . . . . . . . . . . . . . 53
couplings, casing . . . . . . . . . . . . . . . . . . . . . . . . . . . . flush bushings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 plugs, high-pressure. . . . . . . . . . . . . . . . . . . . . . . . 29
short thread . . . . . . . . . . . . . . . . . . . . . . . . . . 18 forged steel fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . pressure-temperature ratings . . . . . . . . . . . . . . . . . . .
long thread. . . . . . . . . . . . . . . . . . . . . . . . . . . 18 threaded. . . . . . . . . . . . . . . . . . . . . . . 20-24, 29 cast iron. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
couplings, threaded. . . . . . . . . . . . . . . . . . . . . . . . . . . socket-welding . . . . . . . . . . . . . . 25-28, 30-32 malleable iron . . . . . . . . . . . . . . . . . . . . . . . . 57
cast iron hex . . . . . . . . . . . . . . . . . . . . . . . . . 87
----------- g -------------
cast iron drainage . . . . . . . . . . . . . . . . . . . . . 98 gaskets, flange . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
forged steel . . . . . . . . . . . . . . . . . . . . . . . 22, 24
----------- h -------------
malleable iron Class 150 . . . . . . . . . . . . . . . . 65 hex head bushings . . . . . . . . . . . . . . . . . . . . . . . . . 29
malleable iron Class 300 . . . . . . . . . . . . . . . . 71 hex head plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
steel . . . . . . . . . . . . . . . . . . . . 22, 24, 47-50, 52 hose menders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
couplings, socket-welding, forged steel . . . . . . 26, 28
crosses, flanged . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ---------- i, j, k - - - - - - - - - - -
insert coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
cast iron Class 125 . . . . . . . . . . . . . . . . . . . 103
PF – 150
Alphabetic Index

- - - - - - - - - - q, r - - - - - - - - - - - - ----------- t ------------- ----------- w ------------
reducer inserts . . . . . . . . . . . . . . . . . . . . . . . . . .30-32 tees, flanged . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . waste nut, malleable iron . . . . . . . . . . . . . . . . . . . . 67
reducers, flanged . . . . . . . . . . . . . . . . . . . . . . . . . . . . cast iron Class 125. . . . . . . . . . . . . . . .101-102 welding fittings, socket . . . . . . . . . . . . . 25-28, 30-32
cast iron Class 125. . . . . . . . . . . . . . . . . . . 109 cast iron Class 250. . . . . . . . . . . . . . . . . . . 106 welded anvilets . . . . . . . . . . . . . . . . . . . 35-38, 41-42
cast iron Class 250. . . . . . . . . . . . . . . . . . . 110 tees, threaded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . well seal elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
reducers, threaded . . . . . . . . . . . . . . . . . . . . . . . . . . . cast iron Class 125. . . . . . . . . . . . . . .77, 79-84 --------- x, y, z ----------
cast iron Class 125. . . . . . . . . . . . . . . . . . . . 88 cast iron Class 250. . . . . . . . . . . . . . . . . . . . 92 Y-branches, cast iron drainage. . . . . . . . . . . . . . 96-98
forged steel. . . . . . . . . . . . . . . . . . . . . . . 22, 24 cast iron drainage. . . . . . . . . . . . . . . . . . . . . 96 Y-true. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
malleable iron Class 150 . . . . . . . . . . . . . . . 66 forged steel. . . . . . . . . . . . . . . . . . . . . 20-21, 23
malleable iron Class 300 . . . . . . . . . . . . .68-71 malleable iron Class 150 . . . . . . . . . . . . .60-64
reducers, socket-welding . . . . . . . . . . . . . . . . . . . . . . malleable iron Class 300 . . . . . . . . . . . . . . . 70
forged steel. . . . . . . . . . . . . . . . . .26, 28, 30-32 tees, socket-welding, forged steel . . . . . . . . . . 25, 27
return bends, threaded . . . . . . . . . . . . . . . . . . . . . . . . terms and conditions of sale . . . . . . . . . . . . . . . . 153
cast iron Class 125. . . . . . . . . . . . . . . . . . . . 87 threaded fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
malleable iron Class 150 . . . . . . . . . . . . . . . 66 cast iron . . . . . . . . . . . . . . . . . . . . . . . . . 75-110
run size consolidation . . . . . . . . . . . . . . . . . . . . . . 34 forged steel. . . . . . . . . . . . . . . . . . . . . 20-24, 29
----------- s ------------- malleable iron. . . . . . . . . . . . . . . . . . . . . . 57-73
safety valve discharge elbow . . . . . . . . . . . . . . . . . 93 traps, cast iron drainage . . . . . . . . . . . . . . . . . . . . 98
sanitary tees. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 tubing swages . . . . . . . . . . . . . . . . . . . . . . . . . . 13-14
socket-welding fittings. . . . . . . . . . . . . . . . . . . . . . . . tubing nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
forged steel. . . . . . . . . . . . . . . . . . 25-28, 30-32 standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
square head bushings . . . . . . . . . . . . . . . . . . . . . . 29 extra heavy . . . . . . . . . . . . . . . . . . . . . . . . . . 16
square head plugs . . . . . . . . . . . . . . . . . . . . . . . . . 29 tucker connection, drainage . . . . . . . . . . . . . . . . . . 98
standards & specifications. . . . . . . . . . . . . . . . . . 149 ----------- u ------------
steel couplings. . . . . . . . . . .22, 24, 26, 28, 47-50, 52 unions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
steel couplings, merchant . . . . . . . . . . . . . . . . .47-50 forged steel. . . . . . . . . . . . . . . . . . . . . . . . . . 43
steel fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . malleable iron. . . . . . . . . . . . . . . . . . . . . . 72-73
threaded . . . . . . . . . . . . . . . . . . . . . . .20-24, 29 malleable iron ground joint . . . . . . . . . . .72-73
socket-welding . . . . . . . . . . . . . . . 25-28, 30-32 all iron Class 300 . . . . . . . . . . . . . . . . . . . 72-73
steel hose fittings. . . . . . . . . . . . . . . . . . . . . . . . . . 55 unions, flange . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
steel fittings for plastic pipe . . . . . . . . . . . . . . . . . . 54 cast iron, threaded . . . . . . . . . . . . . . . . . . . . 87
steel nipples. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 forged steel, threaded . . . . . . . . . . . . . . . . . . 43
steel unions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 forged steel, socket-welding. . . . . . . . . . . . . 43
swage nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ----------- v ------------
carbon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-9 venturi male adapter . . . . . . . . . . . . . . . . . . . . . . . 54
stainless . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
swages, tubing. . . . . . . . . . . . . . . . . . . . . . . . . .13-14
swages, casing. . . . . . . . . . . . . . . . . . . . . . . . . .13-14
PF – 151
Figure Number Index
Figure No. Page Figure No. Page Figure No. Page Figure No. Page
1 PF - 114 551 PF - 72 842 PF - 106 2112 PF - 21
2 PF - 114 552 PF - 73 855 PF - 107 2113 PF - 21
10 PF - 114 554 PF - 72 1006 PF - 90 2114 PF - 21
13 PF - 114 701 PF - 94 1010T PF - 108 2115 PF - 21
20 PF - 114 701R PF - 94 1011 PF - 107 2116 PF - 22
336 PF - 47 702 PF - 94 1016 PF - 109 2117 PF - 22
337 PF - 49 702A PF - 94 1018 PF - 108 2118 PF - 22
338 PF - 46 703 PF - 94-95 1021 PF - 110 2119 PF - 22
339 PF - 46 705 PF - 94-95 1025 PF - 110 2120 PF - 22
341 PF - 46 706 PF - 94-95 1030 PF - 110 2121 PF - 29
341A PF - 46 707 PF - 94-95 1035 PF - 107 2122 PF - 29
343 PF - 46 708 PF - 94-95 1101 PF - 58 2125 PF - 43
346 PF - 48 709 PF - 95 1101R PF - 59 2126 PF - 43
347 PF - 50 718 PF - 96 1102 PF - 58 2127 PF - 43
348 PF - 51 719 PF - 96 1103 PF - 60 2128 PF - 43
349 PF - 52 722 PF - 96 1103R PF - 60 2131 PF - 23
351 PF - 76 723 PF - 96 1104 PF - 59 2132 PF - 23
352 PF - 78 726 PF - 96 1105 PF - 60 2133 PF - 23
356 PF - 77 727 PF - 97 1105R PF - 61 2134 PF - 23
356A PF - 77 728 PF - 97 1106 PF - 64 2135 PF - 23
358 PF - 77 729 PF - 97 1106R PF - 64 2136 PF - 24
359 PF - 79 - 84 730 PF - 96 1107 PF - 65 2137 PF - 24
360 PF - 84 731 PF - 97 1108 PF - 64 2138 PF - 24
361 PF - 85 - 86 734 PF - 97 1119 PF - 66 2139 PF - 29
366 PF - 87 735 PF - 97 1121 PF - 65 2140 PF - 29
367 PF - 88 736 PF - 98 1124 PF - 66 2141 PF - 24
368 PF - 88 744 PF - 98 1125 PF - 66 2142 PF - 29
370 PF - 90 752 PF - 98 1133 PF - 67 2143 PF - 24
371 PF - 76 753 PF - 98 1134 PF - 65 2150 PF - 25
372 PF - 76 754 PF - 98 1137 PF - 67 2151 PF - 25
373 PF - 86 801 PF - 99 1160 PF - 68 2152 PF - 25
375 PF - 87 802 PF - 99 1161 PF - 68 2153 PF - 25
376 PF - 87 803 PF - 100 1161R PF - 68 2154 PF - 26
377 PF - 87 804 PF - 100 1162 PF - 69 2155 PF - 26
380 PF - 91 804R PF - 100 1163 PF - 71 2156 PF - 26
381 PF - 91 805 PF - 101 1164 PF - 70 2157 PF - 26
383 PF - 89 808 PF - 101 1164R PF - 70 2158 PF - 26
385 PF - 90 810 PF - 103 1165 PF - 69 2159 PF - 32
387 PF - 91 811 PF - 101 1166 PF - 71 2170 PF - 27
388 PF - 91 812 PF - 102 1167 PF - 71 2171 PF - 27
389 PF - 91 821 PF - 103 1170 PF - 69 2172 PF - 27
390 PF - 91 823 PF - 103 1190 PF - 64 2173 PF - 27
421 PF - 92 825 PF - 104 1538 PF - 93 2174 PF - 28
424 PF - 91 826 PF - 104 1538F PF - 93 2175 PF - 28
425 PF - 92 831 PF - 105 2101 PF - 20 2176 PF - 28
426 PF - 92 832 PF - 73 2102 PF - 20 2177 PF - 28
459 PF - 72 832 PF - 106 2103 PF - 20 2178 PF - 28
463 PF - 72 833 PF - 106 2104 PF - 20 2179 PF - 32
487 PF - 87 841 PF - 106 2111 PF - 21 J-3 PF - 73
PF – 152
Conditions and Terms of Sale
1 CONTROLLING PROVISIONS: These terms and conditions shall 5. RETURNS: Seller cannot accept return of any products unless its written
control with respect to any purchase order or sale of Seller’s products. No permission has been first obtained, in which case same will be credited
waiver, alteration or modification of these terms and conditions whether on subject to the following: (a) All material returned must, on its arrival at
Buyer’s purchase order or otherwise shall be valid unless the waiver, Seller’s plant, be found to be in first-class condition; if not, cost of putting in
alteration or modification is specifically accepted in writing and signed by an saleable condition will be deducted from credit memor anda. (b) A h
authorized representative of Seller. andling charge deduction of twenty percent (20%) will be made from all
credit memor anda issued for material returned. (c) Transportation charges,
2. DELIVERY: Seller will make every effort to complete delivery of
if not prepaid, will be deducted from credit memor anda.
products as indicated on Seller’s acceptance of an order, but Seller assumes
no responsibility or liability, and will accept no back-charge, for loss or 6. SHIPMENTS: All products sent out will be carefully examined, counted
damage due to delay or inability to deliver caused by acts of God, war, labor and packed. The cost of any special packing or special h andling caused by
difficulties, accident, delays of carriers, by contractors or suppliers, inability Buyer’s requirements or requests shall be added to the amount of the order.
to obtain materials, shortages of fuel and energy, or any other causes of any No claim for shortages will be allowed unless made in writing within ten (10)
kind whatever beyond the control of Seller. Seller may terminate any contract days of receipt of a shipment. Claims for products damaged or lost in transit
of sale of its products without liability of any nature, by written notice to should be made on the carrier, as Seller’s responsibility ceases, and title
Buyer, in the event that the delay in delivery or performance resulting from passes, on delivery to the carrier.
any of the aforesaid causes shall continue for a period of sixty (60) days.
7. SPECIAL PRODUCTS: Orders covering special or non-standard
Under no circumstances shall Seller be liable for any special or
products are not subject to cancellation except on such terms as Seller many
consequential damages or for loss, damage, or expense (whether or not
specify on application.
based on negligence) directly or indirectly arising from delays or failure to
give notice of delay. 8. PRICES and DESIGNS: Prices and designs are subject to change
without notice. All prices are F.O.B. Point of Shipment, unless otherwise
3. WARRANTY: Seller warrants for one year from the date of shipment
stated.
Seller’s manufactured products to the extent that Seller will replace those
having defects in materials or workmanship when used for the purpose and 9. TAXES: The amount of any sales, excise or other taxes, if any, applicable to
in the manner which Seller recommends. If Seller’s examination shall the products covered by this order, shall be added to the purchase price and
disclose to its satisfaction that the products are defective, and an adjustment shall be paid by Buyer unless Buyer provides Seller with an exemption
is required, the amount of such adjustment shall not exceed the net sales certificate acceptable to the taxing authorities.
price of the defective products only and no allowance will be made for labor
10. NUCLEAR PLANTS: Where the products, engineering design or
or expense of repairing or replacing defective products or workmanship or
fabrication is for nuclear plant applications, Buyer agrees: (a) to take all
damage resulting from the same. Seller warrants the products which it sells
necessary steps to add Seller as an insured under the American Nuclear
of other manufacturers to the extent of the warranties of their respective
Insurers’ (ANI) pool and under the Mutual Atomic Energy Reinsurance Pool
makers. Where engineering design or fabrication work is supplied, buyer’s
(MAERP) for property damage and liability insurance and if necessary steps
acceptance of Seller’s design or of delivery of work shall relieve Seller of all
could have been taken, but are not taken, Buyer shall hold Seller harmless
further obligation, other than as expressed in Seller’s product warranty. THIS
against all such losses which could have been thus covered, (b) to hold
IS SELLER’S SOLE WARRANTY. SELLER MAKES NO OTHER WARRANTY OF ANY
Seller harmless with respect to any personal injury (or death), property
KIND, EXPRESSED OR IMPLIED: and ALL IMPLIED WARRANTIES OF
damage or other loss in a nuclear incident which is caused directly or
MERCHANTABILITY and FITNESS FOR A PARTICULAR PURPOSE WHICH
indirectly by defective design, material, or workmanship furnished by Seller
EXCEED SELLER’S AFORESTATED OBLIGATION ARE HEREBY DISCLAIMED BY
and which is covered by insurance maintained by Buyer (or which could be
SELLER and EXCLUDED FROM THIS WARRANTY. Seller neither assumes, nor
so covered but with respect to which Buyer has elected to self-insure), and
authorizes any person to assume for it, any other obligation in connection
further agrees to waive subrogation by its carriers of such insurance against
with the sale of its engineering designs or products. This warranty shall not
Seller, and (c) as to nuclear hazards for which Buyer cannot obtain
apply to any products or parts of products which (a) have been repaired or
insurance coverage, the liability of Seller for any personal injury (or death),
altered outside of Seller’s factory, in any manner; or (b) have been subjected
property damage or other loss directly caused by defective design, material,
to misuse, negligence or accidents; or (c) have been used in a manner
or workmanship furnished by Seller shall not exceed the value of the
contrary to Seller’s instructions or recommendations. Seller shall not be
material furnished by Seller at the time of the loss occurrence.
responsible for design errors due to inaccurate or incomplete information
supplied by Buyer or its representatives. 11. MINIMUM INVOICE: $25.00 plus transportation.
4. SELLER’S LIABILITY: Seller will not be liable for any loss, damage, 12. TERMS: Cash, net 30 days unless otherwise specified.
cost of repairs, incidental or consequential damages of any kind, whether
based upon warranty (except for the obligation accepted by Seller under
“Warranty” above), contract or negligence arising in connection with the
design, manufacture, sale, use or repair of the products or of the engineering
designs supplied to Buyer.
PF – 153
DESIGN SERVICES
BROCHURE
Order Document
Number 105
PIPING DESIGN
AND ENGINEERING
Order Document
Number 360
ANVIL INTERACTIVE CD
Order Document Number 899
• Gruvlok Interactive Catalog
• Gruvlok Submittal Package
• Gruvlok Fire Protection Brochure
• Interactive Pipe Hanger Catalog
• Interactive Pipe Fittings Catalog
• Pipe Fitters Handbook
• Anvil List Price Sheets
• Design Services Brochure
• Technical & Engineering Data
• Pipe Hanger CAD Assemblies
HVAC PIPING
PRODUCTS BROCHURE
Order Document
Number 049
PIPE FITTERS
HANDBOOK
Order Document
Number 030
Contact an Anvil Representative to Order Literature

FIRE PROTECTION
PRODUCTS
BROCHURE
Order Document
Number 038
MINING
BROCHURE
Order Document
Number 350
GRUVLOK
GROOVED PIPING
PRODUCTS CATALOG
Order Document
Number 040
PIPE HANGERS
CATALOG
Order Document
Number 165
OIL & GAS PRODUCTS

SOLUTION
BROCHURE
Order Document
Number 320
Contact an Anvil Representative to Order Literature www.anvilintl.com

Previous Return Return to TOC
ANVIL INTERNATIONAL, INC.

CORPORATE OFFICES 110 Corporate Drive, Suite 10 • P.O. Box 3180
www.anvilintl.com Portsmouth, NH 03802-3180
Tel: 603-422-8000 • Fax: 603-422-8033
E-mail address — [email protected]
ANVIL MANAGEMENT TEAM NORTH EAST REGION SOUTH EAST REGION

Thomas E. Fish President Regional Service Center: Servicing Connecticut, Regional Service Center: Servicing Alabama,
Delaware, Maine, Maryland, Massachusetts, Florida, Georgia, Mississippi, North Carolina,
Bob Arison Regional Vice President New Hampshire, New Jersey, New York, South Carolina, Tennessee, Virginia
Ernie Chuter Director, Marketing East Pennsylvania, Rhode Island, Vermont,
Virginia 6344 Cash Court
Laura DiLiegro Director, Human Resources
Norcross, GA 30071
Bob Kim Vice President, Manufacturing 2530 Pearl Buck Road Tel: 770-662-8177 • Fax: 770-662-0284
John Martin Vice President, National Bristol, PA 19007 Tom Ward — Regional Vice President
Accounts Tel: 215-788-4056 • Fax: 215-788-4475
Tom Ward — Regional Vice President Sales Office
Ron Pound Director, National Operations
1202 Tech Blvd., Suite 10
William Strouss Vice President, Finance Tampa, FL 33619
Dean Taylor Regional Vice President MID WEST REGION
Pipe Fittings Catalog

Tel: 800-429-0703 • Fax: 813-663-0811
Tom Ward Regional Vice President Regional Service Center: Servicing Illinois,
Indiana, Iowa, Kansas, Kentucky, Michigan, WESTERN REGION
Minnesota, Missouri, Nebraska, North and South
ANVIL MANUFACTURED PRODUCTS Dakota, Ohio, West Pennsylvania, West Virginia, Regional Service Center: Servicing Alaska, Arizona,
Wisconsin California, Hawaii, Idaho, Montana, Nevada, Oregon,
Columbia, PA Foundry Utah, Washington
1411 Lancaster Avenue 750 Central Avenue
University Park, IL 60466 1385 Greg Street
Columbia, PA 17512
Tel: 708-534-1414 • Fax: 708-534-5441 Sparks, NV 89431
Tel: 717-684-4400 • Fax: 717-684-6868
Toll Free: 1-800-301-2701 Tel: 775-331-7029 • Fax: 775-331-5075
Henderson, TN Plant Toll Free: 1-800-572-0051
Dean Taylor — Regional Vice President
2870 Old Jackson Road Bob Arison — Regional Vice President
Henderson, TN 38340 Sales Office
Tel: 731-989-3551 • Fax: 731-989-4144 321 North Point Drive Satellite Offices
Rich Brooks — Plant Manager Pittsburgh, PA 15233 P.O. Box 10206 • Portland, OR 97210
Tel: 412-321-6544 • Fax: 412-321-6643 Tel: 503-223-7101 • Fax: 503-223-7130
Canvil
390 Second Avenue Toll Free: 1-800-441-1352 14103 Borate St.
Simcoe, ON Canada N3Y 4K9 Satellite Offices Sante Fe Springs, CA 90670
Tel: 519-426-4551 • Fax: 519-426-5509 1201 W. 96th Street Tel: 562-802-7459 • Fax: 562-802-7519
Brent Widdifield — Plant Manager Bloomington, MN 55431
Longview, TX Plant Tel: 952-884-7131 • Fax: 952-887-1501 CANADA — MUELLER-FLOW CONTROL
305 Simms Toll Free: 1-800-733-7131 Kevin Fullan – Vice President
Longview, TX 75604 9530 Le Saint Drive • Fairfield, OH 45014 Tel: 905-664-1459 ext 272
Tel: 903-759-4417 • Fax: 903-759-1782 Tel: 513-682-2330 • Fax: 513-870-0109 Doug Crawford –
Van O’Keefe — Plant Manager Toll Free: 1-800-837-2424 National Marketing Manager
J.B. Smith 8615 East 33rd Street Tel: 905-664-1459 ext 248
6618 Navigation Indianapolis, IN 46226
Alberta
Houston, TX 77011 Tel: 317-895-2424 • Fax: 317-895-2430
Tel: 713-928-5460 • Fax: 713-928-6733 Toll Free: 1-800-837-1515 Calgary - Tel: 403-246-0033 • Fax: 403-246-0051
Ray Mullenix — Plant Manager Edmonton - Tel: 780-452-9841 • Fax: 780-452-9873
1930 Warren Street
North Kingstown, RI Plant Kansas City, MO 64116 British Columbia
160 Frenchtown Road Tel: 816-474-0500 • Fax: 816-221-7150 Delta - Tel: 604-940-1449 • Fax: 604-940-9878
North Kingstown, RI 02852 Toll Free: 1-800-877-7007 Nanaimo - Tel: 250-758-1551 • Fax: 250-758-1160
Tel: 401-886-3001 • Fax: 401-886-3010 24600 Northline Road • Taylor, MI 48180 Prince George -
Robert Taylor — General Manager Tel: 734-947-3083 • Fax: 734-947-4682 Tel: 250-561-1219 • Fax: 250-561-7358
Toll Free: 1-800-279-1601 Vancouver City -
ENGINEERED PIPE SUPPORTS Tel: 604-875-6990 • Fax: 604-875-6962
• Structural Fabrication SOUTH WEST REGION Manitoba
• Field Services Regional Service Center: Servicing Arkansas,
Colorado, Louisiana, New Mexico, Oklahoma, Winnipeg - Tel: 204-774-3461 • Fax: 204-786-5044
• Non-destructive Testing Texas, Wyoming
Contact: North Kingstown, RI Plant Ontario
1313 Avenue R
Tel: 401-886-3001 Stoney Creek -
Grand Prairie, TX 75050
Tel: 972-343-9206 • Fax: 972-641-8946 Tel: 905-664-9230 • Fax: 905-664-9556
ANVIL RESEARCH AND DEVELOPMENT Bob Arison — Regional Vice President Toronto - Tel: 416-251-4171 • Fax: 416-251-7087
20 Thurber Blvd. Sarnia - Tel: 519-336-7690 • Fax: 519-336-1621
Smithfield, RI 02917 Satellite Offices Sudbury - Tel: 705-671-9600 • Fax: 705-671-8082
Tel: 401-349-3020 6999 Old Clinton Rd
Fax: 401-349-3021 Houston, TX 77020 Quebec
Tel: 713-675-6371 • Fax: 713-678-7858 Montreal - Tel: 514-342-2100 • Fax: 514-342-2177
2600 W. 42nd Street • Odessa, TX 79764 Ste-Foy - Tel: 418-650-5766 • Fax: 418-266-0252
ANVIL NATIONAL ACCOUNTS
Tel: 915-366-2803 • Fax: 915-366-0890 Saskatchewan
John Martin -
Vice President National Accounts 4200 Holly Street • Denver, CO 80216 Regina - Tel: 306-543-5536 • Fax: 306-545-0390
Tel: 303-394-2856 • Fax: 303-394-3520 Tel: 303-394-2178 • Fax: 303-321-3050 Saskatoon - Tel: 306-242-6788 • Fax: 306-242-5089
#010 / Printed in USA / PL / 10.02 / 20M / ©2002 Anvil International, Inc. PF-10.02

ANVIL Pipe Fittings Catalog PDF

Uploaded by

Copyright:

Available Formats

ANVIL Pipe Fittings Catalog PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

ANVIL Pipe Fittings Catalog PDF

Uploaded by

Copyright:

Available Formats

Next Return Return to TOC

ANVIL INTERNATIONAL, INC.

ANVIL MANAGEMENT TEAM NORTH EAST REGION SOUTH EAST REGION

Pipe Fittings Catalog

OIL & GAS PRODUCTS

Contact an Anvil Representative to Order Literature www.anvilintl.com

ANVIL PRODUCT LINES

• Forged Steel Fittings, Unions

WHOLESALE DISTRIBUTION • J.B. Smith Swage Nipples

CUSTOMER SERVICE AND SUPPORT • Tee-Offs

Click on the page number to jump to that page

J. B. Smith Oil Country Products

MANUFACTURING SPECIFICATION MARKING

A234A-00 WPB Chemical Composition Requirements

A234A-00 WBP - Physical Requirements

JBS 60,000 - 85,000 PSI 35,000 PSI Min 197 Max

Line Pipe Swages

Size XXS/XXH &

NPS DN in mm NPS DN in mm lbs kg lbs kg lbs kg

1 25 9 229 7.5 3.4 10.0 4.5 18 8.2

21⁄2 65 9 229 7.5 3.4 10.0 4.5 18 8.2

3 and 31⁄2 80 and 90 9 229 7.5 3.4 10.0 4.5 18 8.2

1 thru 11⁄2 25 thru 40 11 279 12 5.2 17 7.7 33 15

2 and 21⁄2 50 and 65 11 279 12 5.2 17 7.7 33 15

4 100 11 279 12 5.2 17 7.7 33 15

1 thru 11⁄2 25 thru 40 12 305 17 7.7 25 11 46 21

2 and 21⁄2 50 and 65 12 305 17 7.7 25 11 46 21

6 150 65⁄8 168 3 and 31⁄2 80 and 90 12 305 17 7.7 25 11 46 21

4 100 12 305 17 7.7 25 11 46 21

5 125 12 305 17 7.7 25 11 46 21

2 thru 3 50 thru 80 13 330 29 13 44 20 78 35

8 200 85⁄8 219 4 and 5 100 and 125 13 330 29 13 44 20 78 35

Size XXS/XXH &

NPS DN in mm NPS DN in mm lbs kg lbs kg lbs kg

Size XXS/XXH &

Solid Refinery Plugs Size Length

Current API Thread Standards

21⁄2 65 27⁄8 73 8V 10 Rd.

21⁄2 EUE 65 27⁄8 73 – 8 Rd.

31⁄2 90 4 102 8V 8 Rd.

31⁄2 EUE 90 4 102 8V 8 Rd.

Swage Nipples – Oil Country

Large End Upset Standard XS/XH XXS/XXH

Swage Nipples – Oil Country

Large End Standard XS/XH XXS/XXH

Size Standard XS/XH XXS/XXH

CASING BULL PLUGS

Adapter Nipples Seamless Schedule 40 TUBING NIPPLES

NPS DN lbs/ft kg ❑ Lengths are 4” - 18” (102mm - 457mm)

Tubing Nipples Size Tubing Nipples Size

Oil Country Size O.D. Weight

51⁄2 140 1144 519 63⁄4 171

7 175 1834 832 71⁄4 184

85⁄8 219 3558 1614 73⁄4 197

103⁄4 273 4553 2065 8 203

133⁄8 340 5623 2551 8 203

16 400 7898 3582 9 229

20 500 9500 4309 9 229

51⁄2 140 1403 636 8 203