EuropartMan PDF

Download as pdf or txt
Download as pdf or txt
You are on page 1of 320
At a glance
Powered by AI
The document provides information about identifying MAN vehicle parts and models from the VIN plate and discusses EUROPART's product offering including spare parts, lubricants, and diagnostic equipment.

The VIN plate contains information like the vehicle manufacturer, type code, and serial number that can be used to uniquely identify the vehicle and corresponding parts.

EUROPART offers over 5000 of its own-brand spare parts and products as a lower-cost alternative to OE parts with wide availability across its network of locations.

MAN Truck

Spare parts and accessories

Spare parts to fit:

- TGX, TGS, TGA

- TGM, TGL
Vehicle identification

This catalogue gives an overview of our comprehensive range of spare parts to fit MAN Truck series TGX, TGS, TGA,
TGM and TGL.

The vehicle identifiers and engine types given with the items on the pages of the catalogue provide information about
the specific vehicle application.

To uniquely identify a part, please contact your EUROPART subsidiary with the complete Vehicle Identification
Number (VIN) or use the vehicle part search in our EUROPART Workshop Online System (EWOS) at
http://www.ewos.net

Breakdown of the MAN Vehicle Identification Number (VIN):

WMA 06X ZZ18 W 000000 You will find the VIN num-
ber on the VIN plate
which is located on the
consecutive serial number door frame* and it is also
production plant stamped into the vehicle
chassis.
consecutive numbering

type code number

manufacturer number * VIN numbers are found on the


passenger side.

Series overview:

Series Model year Type code number Cab variants


TGX 2007- ..X XL, XLX, XXL
TGS 2007- ..S M, L, LX
TGA 2000-2007 H.. M, L, LX , XL, XLX, XXL
TGM 2006- N08, N16, N18, N26, N28, N34, C, L, LX, DK
N36, N37, N38, N44, N46, N48,
N62, N63, N64, N65
TGL 2005- N01, N02, N03, N04, N05, N11, C, L, LX, DK
N12, N13, N14, N15, N49, N60, N61

Note:
 Cross-reference numbers on the pages of the catalogue serve for identification purposes
 „on request“ = not a product kept in store, the delivery time may be longer
EUROPART® – a powerful brand

Alongside well-known manufacturer's brands,


EUROPART also offers a strong assortment of its
own-brand products with more than 5000 items
from the various EUROPART ranges.

Top quality at a fair price.

Your advantages:
 Low-cost alternative for OE standard
 Maximum availability at 200 locations
in 28 countries
 Increase your competitiveness
 Consistent service package
Commercial vehicle diagnosis?
Best go straight to EUROPART!

We keep vehicles on the move:

Across-brand diagnostic equipment for tractor units,  Test and Diagnosis Technology
trailers, semi-trailers, agricultural vehicles, vans, cars
 Brakes/Axle Service
and buses
 Engines/Gearboxes
 Air suspension
and much more

More information from:


www.europart.net
Meet your objectives with the right
technology!

The AXONE product line


Hand-held diagnostic unit for all vehicle
categories

OBD Log and OBD MATRIX


Modern wireless exhaust gas measure-
ment on petrol and diesel engines

TEXA IDC4 universal software for control


of all TEXA workshop equipment

AUTOPOWER exhaust gas measuring


equipment
Modern wireless exhaust gas measurement
on petrol and diesel engines

KONFORT
Air conditioning service units for
R134a and R1234yf

UNIPROBE
Measurement module with 4-channel
oscilloscope, multimeter,
CAN-BUS readings, etc.

The EUROPART partner for NAVIGATOR TXT


diagnosis in the workshop Diagnostic interface for PC
Fly your banners. The workshop
concept from EUROPART!

Become part of a country-wide specialist


network.

Your advantages:
 Workshop network in Germany
 Effective marketing concepts!
 Technical information and Hotline
 Modern diagnostic equipment and assured parts
supply
 ISO certification possible if required
 No system charges for low sales volume

Become a partner now!


[email protected]
[email protected]
[email protected]
Contents

TGX, TGS, TGA 1

TGM, TGL 2

Technical equipment and accessories 3

www.europart.net
1
MAN
TGX, TGS, TGA

2
1

Engine .............................................................................................................................4-23
Drive ..............................................................................................................................24-31
Suspension ..................................................................................................................32-37
Axle and steering........................................................................................................38-49
Braking system ...........................................................................................................50-59
Pneumatic system ......................................................................................................60-81
Lighting and electrics.................................................................................................82-95
Bodywork...................................................................................................................96-115
Driver’s cab.............................................................................................................116-135
Truck styling............................................................................................................136-141

www.europart.net 3
1
Engine
Engine bearing
TGX, TGS, TGA

suitable for TGX, TGS


Motor type D 2033, D 2676
Installation location rear
Order number
5230 200 373

Engine piston
suitable for TGA
Motor type e.g. D 2876 LF 12-13/25, LOH 20-21
Bore hole diameter 128 mm
Bolt diameter 52 mm
Bolt length 103 mm
Compression height 79,25 mm
Length 134.25 mm
Recess depth 23,75 mm
Order number
1911 000 756

Crankcase seal set


suitable for TGA
Motor type e.g. D 2866 LF 20-22/34-36, LFG 03-05/07, LOH 21/31,
D 2876 LF 02, LOH 01, E 2866 DF 01-04, DOH 02-04
Order number
(on request) 8002 533 961

Crankcase seal set


suitable for TGA
Motor type e.g. D 2866 LF 23-28/30-32/36/37, D 2876 LF 03-07/11
Scope of supply
with crankshaft axial seal, without cylinder liner rings
Order number
8002 535 556

Engine gasket set


suitable for TGA
Motor type e.g. D 2866 LF 23-29/31-32/37-41/43/45, LOH 27-29/32-35/38,
D 2876 LF 03-11/14/1720-22/24
Scope of supply
with valve stem seal, crankshaft axial seal and cylinder liner rings, without valve cover
gasket
not for production week 07/2003-23/2003
Order number
8002 000 039

4
Engine 1

TGX, TGS, TGA


Engine gasket set
suitable for TGX, TGS
Motor type e.g. D 2066 LF 01-04/06-07/11-14/31-33/35-36/38-39, LFG 01
Scope of supply
with valve stem seal, crankshaft axial seal and cylinder liner rings, without oil pan
gasket
Order number
8002 534 353

Cylinder head gasket set


suitable for TGX, TGS, TGA
Motor type e.g. D 2066 LF 01-04/06-07/11-14/31-33/35-36/38-39,
LOH 01-08/10-12
Version 1 x per engine, without valve cover gasket
Order number
8002 045 172

Cylinder head gasket set


suitable for TGA
Motor type e.g. D 2866 LF 23-29/31-32/37-41/43/45, LOH 27-29/32-35/38,
LUH 20-30/35-37/50-52, D 2876 LF 03-11/14/17/20-22/24,
LOH 02-05
Version for one cylinder head, without valve cover gasket
Inner diameter 144.5 mm
Material cylinder head gasket = multilayer metal gasket
not for production week 07/2003-23/2003
Order number
8002 013 418

Cylinder head gasket set


suitable for TGA
Motor type e.g. D 2866 LF 23-29/31-32/37-41/43/45, LOH 27-29/32-35/38,
LUH 23-25/27-30/34-37/50-52, D 2876 LF 03-11/14/17/20-22/24,
LOH 02-05
Version for one cylinder head, without valve cover gasket
Inner diameter 129 mm
Material Steel
only for production week 07/2003-23/2003, for modified cylinder liners
Order number
8002 013 417

www.europart.net 5
1
Engine
TGX, TGS, TGA

Cylinder head gasket set


suitable for TGA
Motor type e.g. D 2840 LF 01/04/06/20-21/23-24/27-28, D 2865 LF 01-07/09-24,
LOH 01-07/09-24, LOH 01-02/05/07-10, D 2866 LF 02-10/14-17/
20-22/34-36/43, LUH 20-30/34-37/50-52, D 2876 LF 01/02,
LOH 02-05, E 2866 DF 01-04, DOH 02-04
Version for one cylinder head
Material cylinder head gasket = multilayer metal gasket
Order number
8022 102 508

Cylinder head gasket


suitable for TGX, TGS, TGA
Motor type e.g. D 2066 LF 01-04/06-07/11-14/17-28/31-33/35-36/38-39,
LOH 01-08/10-12, LUH 07-09/11-15/21-24
Material Metal/elastomer
Order number
8002 048 916

Cylinder head gasket


suitable for TGX, TGS, TGA
Motor type e.g. D 2676 LF 11-12/14/, LOH 01-04/10
Order number
(on request) 8002 000 345

Cylinder head gasket


suitable for TGA
Motor type e.g. D 2866 LF 03-05/06/09-10/14-16/20/34, D 2876 LF 01-02
Order number
8002 527 500

Cylinder liner

(Illustration similar)

suitable for Motor type Outer ∅ mm Bore hole ∅ mm Length mm Order number
TGS, TGA e.g. D 2066 139.5 120 260 1910 037 893
TGA e.g. D 2866, D 2876 144.5 128 270 1911 012 557

6
Engine 1

TGX, TGS, TGA


Sealing ring set
for cylinder liner
suitable for TGA
Motor type e.g. D 2840 LF 01/04/06/20-21/23-24/27-28, D 2865 LF 01-07/09-24,
LOH 01-02/05/07-10, D 2866 LF 02/10/14-17/20-22/34-36/43,
LUH 20-30/34-37/50-52, D 2876 LF 01/03-11/14/17/20-22,
LOH 02-05, E 2866 DF 01-04, DOH 02-04
not for production weeks 07/2003-23/2003
Order number
8002 044 690

Oil pan gasket


suitable for TGA
Motor type e.g. D 0836 LFL 01-06/10/40-41/44/50-55
Material Rubber
Order number
8002 535 931

1 Class st
Service Parts mit „Blu motion“ inside

... da steckt mehr drin!

Erleben Sie unsere Produktwelt jetzt auch


mobil als App.

www.victorreinz.com
1
Engine
TGX, TGS, TGA

Oil pan gasket


suitable for TGA
Motor type e.g. D 2866 LF 20-32/34-37, D 2876 02-07/11-13/25
Material Rubber
Order number
8002 535 933

Oil pan gasket


suitable for TGA
Motor type pvz., D 2866 LF 03-0609/10/14-16/20-32/34-37, D 2876 LF 02-07/
11-13/25
Material Soft-material
Order number
1910 030 486

Oil pan gasket


suitable for TGX, TGS, TGA
Motor type e.g. D 2066 LF 01/07/11-14/17-28/31-33/35-43, D 2676 LF 01-07/
11-16/21/22
Material rubber
Order number
8002 051 883

Oil pan gasket


suitable for TGX, TGS, TGA
Motor type e.g. D 2066 LF 01/07/11-14/17-28/31-33/35-43, D 2676 LF01-07/
11-16/21/22
Material Soft-material
Order number
8002 051 884

Valve cover gasket


suitable for TGA
Motor type e.g. D 2866 LF 23-28/30-32/36/37, D 2876 LF 03-07/11
Version Order number
without cable duct 8022 123 410
with cable duct 8022 123 420

8
Engine 1

TGX, TGS, TGA


Valve cover gasket
suitable for TGA
Motor type e.g. D 2876 LF 12/13/25
Version with cable duct
Order number
8002 100 012

Valve cover gasket


suitable for TGX, TGS, TGA
Motor type e.g. D 2066 LF/LOH, D 2676 LF/LOH
Order number
8002 141 520

Accessories
Description Version Order number
Screw 18 x installed up to production week 20/2007 8002 043 044
10 x installed from production week 21/2007
(in combination with order number 8002 001 069)
Screw 8 x installed from production week 21/2007 8002 001 069
(in combination with order number 8002 043 044)

Valve cover gasket


suitable for TGA
Motor type e.g. D 25 xx, D 28 xx with 2-valve technology
Version EWP
Material Soft-material
Order number
8002 579 637

Cylinder head screw set


suitable for TGA
Version external TORX®, for one cylinder head
Motor type Thread Order number
e.g. D 2866 with 4-valve technology, M15 8002 000 272
D 2876 with 2-valve and 4-valve technology
e.g. D 2876 LF 12 M16 8002 533 790

www.europart.net 9
1
Engine
Oil pressure sensor
TGX, TGS, TGA

Outer thread M18 x 1.5


Switching pressure 0,25+0,15 bar
Number of connections 3
Thread length 12 mm
Order number
5234 210 109

Oil filter
suitable for TGA

This figure corresponds to 9020 009 510

Outer ∅ x Inner ∅ x Height mm Order number Comparative number


82.5 x 36 x 169 9020 009 510 MANN HU 951 x
114.5 x 55 x 146.5 9020 013 810 MANN HU 1381 x
80 x 39 x 214 9020 009 472 MANN HU 947/2 x

Oil filter
suitable for TGX, TGS, TGA
External diameter 121 mm
Inner diameter 44.5/57 mm
Height 203.5 mm
Order number Comparative number
3359 000 559 Hengst E422H D86

Hydraulic filter
suitable for TGX, TGS, TGA
External diameter 60 mm
Inner diameter 18/18 mm
Height 100.5 mm
Order number Comparative number
9025 503 090 MANN H 601/4

10
Engine 1

TGX, TGS, TGA


Fuel filter

This figure corresponds to 9020 001 059

suitable for Outer ∅ x Inner ∅ x Height mm Order number Comparative number


TGA 76/78 x 38 x 230 9020 000 855 MANN PU 855 x
TGA 75.7 x 12 x 229.8 9020 000 850 MANN PU 850 x
TGX, TGS, TGA 95 x 14/46 x 172.5 9020 001 059 MANN PU 1059 x

Fuel filter
suitable for TGX, TGS, TGA
Depth 89 mm
Width 89 mm
Height 54 mm
Order number Comparative number
9750 103 001 Hengst E1030K01
9750 001 030 Hengst E1030K

Fuel filter
External diameter 50 mm
Height 41 mm
suitable for Order number Comparative number
TGX, TGS, TGA 9750 103 122 Hengst E11S03 D65
TGA 9750 103 121 Hengst E11S03 D132

www.europart.net 11
1
Engine
TGX, TGS, TGA

Air filter
suitable for TGX, TGS, TGA
External diameter 267 mm
Inner diameter 170 mm
Height 510 mm
Order number Comparative number
9022 712 501 MANN C 27 1250/1

Secondary air filter


suitable for TGX, TGS, TGA
External diameter 155.5 mm
Height 456.5 mm
Order number Comparative number
9750 103 596 Hengst E428LS

Urea filter
suitable for TGX, TGS, TGA
External diameter 67/70 mm
Height 76 mm
Order number Comparative number
3565 430 767 Hengst E101U D178

Connecting rod bearing


for 6 cylinders
suitable for TGA
Motor type e.g. D 0836 LFL 01
Order number
1910 042 508

Exhaust turbocharger
suitable for TGA
Motor type e.g. D 2866 LF 20
Order number
1902 431 002
(Illustration similar)

12
Engine 1

TGX, TGS, TGA


Exhaust turbocharger
suitable for TGA
Motor type e.g. D 2066 LF 01/02/03/04
Order number
1902 431 101

Exhaust turbocharger
suitable for TGA
Motor type e.g. D 2866 LF 28
Order number
1902 431 103

Add-on set
Application Order number
for exhaust turbocharger, order number 1902 431 002 1902 316 313
for exhaust turbocharger, order number 1902 431 101 1902 024 534
for exhaust turbocharger, order number 1902 431 103 1902 707 106

This figure corresponds to 1902 316 313

Exhaust turbocharger
in exchange
suitable for TGA
Motor type e.g. D 2866 LF 20-32/34-41/43/45
Order number
1902 027 702

Accessories
Description Order number
Add-on set 1902 027 703

Exhaust turbocharger
as replacement
suitable for TGA
Motor type e.g. D 2876 LF 06/17/21-22
Order number
1902 887 117

Accessories
Description Order number
Add-on set 1902 887 118

www.europart.net 13
1
Engine
Exhaust turbocharger
TGX, TGS, TGA

in exchange
suitable for TGA
Motor type e.g. D 2876 LF 05/13/20/25
Order number
1902 125 605

Accessories
Description Order number
Add-on set 1902 027 703

Exhaust turbocharger
as replacement
suitable for TGX, TGS
Motor type e.g. D 2066 LF 03-04, LOH 01-02/12
Order number
1902 024 656

Accessories
Description Order number
Add-on set 1902 024 657

Exhaust turbocharger
in exchange
suitable for TGX, TGS, TGA
Motor type e.g. D 2066 LF 11-14/31-39, LOH 01-08
Order number
1902 024 663

Accessories
Description Order number
Add-on set 1902 024 534

Exhaust turbocharger
suitable for TGA
Motor type e.g. D 2876 LF 04/24
Order number
1902 027 636

Accessories
Description Order number
Add-on set 1902 025 201

14
Engine 1

TGX, TGS, TGA


Charge air cooler
Width 892 mm
suitable for Height mm Depth mm Order number
TGX, TGS, TGA 665 64 0376 724 321
TGX, TGA 665 64 0376 724 371
TGA 685 66 9100 267 330
TGX, TGA 685 66 9100 267 000

This figure corresponds to 9100 267 000

Charge air cooler


suitable for TGX, TGS, TGA
Width 892 mm
Height 665 mm
Depth mm Order number
65 0376 724 381
64 0376 724 361

Charge air hose


suitable for TGX, TGS, TGA
Inner diameter 90 mm
Length 282 mm
Order number
6170 006 402

Water pump
in exchange
suitable for TGA
Motor type D 2866, D 2876
Scope of supply
with seal and pulley
Order number
9150 000 730

www.europart.net 15
1
Engine
Water pump
TGX, TGS, TGA

suitable for TGX, TGA


Motor type D 2866, D 2876
Scope of supply
without pulley
Order number
6170 316 012

Accessories
Description Order number
Hub 5230 215 113

Water pump
with seal
suitable for TGX, TGS, TGA
Motor type D 2066 LF/LOH/LFG
Order number
9152 201 098

Water pump
with seal
suitable for TGX, TGS, TGA
Motor type D 2066
Order number
1902 208 599

Engine radiator
Width 938 mm
suitable for Height mm Depth mm Order number
TGX, TGS 765 42 9100 261 900
TGX, TGS, TGA 845 42 0376 728 661
TGX, TGS, TGA 919 52 5230 231 689
TGX, TGA 919 42 9100 261 910
TGS, TGX, TGA 920 52 0376 756 011

Accessories
Description Order number
This figure corresponds to 9100 261 910 Oil filler pipe (on request) 5230 231 513
Self-tapping oval-headed screw 5230 253 650

16
Engine 1
Thermostat

TGX, TGS, TGA


with seal
Diameter 67 mm
suitable for Opening temperature °C Order number
TGA 79 9100 210 579
TGX, TGS, TGA 83 9100 000 007

Service parts
Description Order number
Thermostat sealing ring 8022 502 128

1 2 3 4

Radiator fan coupling


with Visco clutch, electrical
Illustration suitable for Outer ∅ mm Order number
1 TGA 190 1888 000 046
2 TGA 236 1888 000 047
3 TGX, TGS, TGA 205 1888 000 050
4 TGA 245 1888 000 049

Radiator fan coupling


suitable for TGX, TGS
Diameter 190 mm
Order number
9750 003 302

Radiator fan coupling


suitable for TGX, TGS
Diameter 270 mm
Order number
5230 215 477

www.europart.net 17
1
Engine
TGX, TGS, TGA

Fan wheel
suitable for TGX, TGS, TGA
Number of blades 9
External diameter 670 mm
Order number
(on request) 1100 129 545

Fan wheel
suitable for TGX, TGS, TGA
Number of blades 9
External diameter 750 mm
Order number
0376 728 111

Central silencer
suitable for TGA
Standard Euro 3
Order number Comparative number
5231 010 333 Dinex 49386

Accessories
Description Order number
Intermediate pipe 8704 719 100
Intermediate pipe, Length 200 mm (on request) 8704 718 400
Flexible pipe, Diameter 110 mm 6170 325 053
Exhaust pipe clamp, Diameter 114.5 mm 8700 090 300

Central silencer
suitable for TGA
Standard Euro 3
Order number Comparative number
4260 049 387 Dinex 49387

Accessories
Description Order number
Flexible pipe, Length 375 mm 8772 471 830
Front pipe, elbow 5232 040 452
Front pipe, Length 232/268.5 mm 5247 047 186
Exhaust pipe clamp, Diameter 114.5 mm 8700 090 300

18
Engine 1

TGX, TGS, TGA


Central silencer
suitable for TGA
Standard Euro 3
Order number Comparative number
8700 493 850 Dinex 49385

Accessories
Description Order number
Intermediate pipe, Length 200 mm (on request) 8704 718 400
Flexible pipe, Diameter 110 mm 6170 325 053
Intermediate pipe, Diameter 112 mm 8704 719 200
Exhaust pipe clamp, Diameter 114.5 mm 8700 090 300

Rear silencer
suitable for TGA
Standard Euro 3
Order number Comparative number
5231 010 335 Dinex 49379

Accessories
Description Order number
Front pipe, Length 851 mm 5247 047 190
Front pipe, Length 232/268.5 mm 5247 047 186
Flexible pipe, Diameter 110 mm 6170 325 053
Exhaust pipe clamp, Diameter 114.5 mm 8700 090 300
Heat shield 5231 100 361

Rear silencer
suitable for TGA
Standard Euro 3
Application range
for hazardous materials vehicles
Order number Comparative number
8700 493 830 Dinex 49383

Accessories
Description Order number
Front pipe, Length 851 mm 5247 047 190
Flexible pipe, Diameter 110 mm 6170 325 053
Exhaust pipe clamp, Diameter 114.5 mm 8700 090 300
Heat shield 5231 100 361

www.europart.net 19
1
Engine
TGX, TGS, TGA

Central silencer
suitable for TGS, TGA
Standard Euro 4
Order number Comparative number
4260 047 316 Dinex 47316

Accessories
Description Order number
Front pipe, Length 626 mm 5247 048 120
Intermediate pipe, Length 375 mm 5230 238 175
Flexible pipe, Length 375 mm 5247 047 183
Exhaust pipe clamp, Diameter 114.5 mm 8700 090 300
Clamping collar, Diameter 114.3 mm 8700 049 939
Heat shield 5231 100 361

1 2 3

Rear silencer
suitable for TGX, TGS, TGA
Standard Euro 4
Illustration Order number Comparative number
1 5230 236 583 Dinex 49398
2 4260 047 304 Dinex 47304
3 4260 047 314 Dinex 47314

Accessories
Description Order number
Front pipe, Length 626 mm 5247 048 120
Front pipe, Length 851 mm 5247 047 190
Flexible pipe, Length 415 mm 6170 325 053
Exhaust pipe clamp, Diameter 114.5 mm 8700 090 300
Clamping collar, Diameter 114.3 mm 8700 049 939
Intermediate pipe, Length 777 mm *8700 048 121
Intermediate pipe, Length 660 mm 4260 055 177
* only TGA

20
Engine 1

TGX, TGS, TGA


Rear silencer
suitable for TGX, TGS, TGA
Standard Euro 5
Order number Comparative number
5230 030 026 Dinex 47330
4260 047 333 Dinex 47333
4260 047 343 Dinex 47343

Accessories
Description Order number
Flexible pipe, Length 340 mm 4260 048 218
Flexible pipe, Length 384 mm 5235 105 008
Front pipe 8700 475 430
Front pipe, Length 856 mm 8700 482 220
Clamping collar, Diameter 114.3 mm 5247 068 835
Exhaust pipe clamp, Diameter 114.5 mm 9990 000 260

Exhaust-manifold gasket
suitable for TGA
Motor type z. B. D 2840 LF 25, D 2842 LF 10, D 2866 LF 23-29/31-32/37-41/
43/45, LOH 27-29/32-35/38, LUH 23-25/27-30/34-37/50-52,
D 2876 LF 03-11/14/17/20-22/24, LOH 02-05
Thickness 1.2 mm
Order number
8002 476 231

Intake-manifold gasket
suitable for TGA
Motor type z. B. D 2840 LF 25, D 2842 LF 10, D 2866 LF 23-29/31-32/37-41/
43/45, LOH 27-29/32-35/38, LUH 23-25/27-30/34-37/50-52,
D 2876 LF 03-11/14/17/20-22/24, LOH 02-05
Thickness 2 mm
Order number
8002 360 751

www.europart.net 21
1
Engine
Hand feed pump
TGX, TGS, TGA

suitable for TGA


Thread M16 x 1.5
Order number
9172 400 010

High-pressure pump
in exchange
suitable for TGA, TGS
Motor type e.g. D 2066
Order number
(on request) 1911 045 815

High-pressure pump
suitable for TGX, TGS, TGA
Application range
for diesel vehicles (CR system)
Order number
(on request) 1911 046 445

Fuel tank
steel
suitable for TGX, TGS, TGA
Version 2 bayonet openings

Volume l Dimensions mm Order number


220 615 x 515 x 800 9660 022 460
300 615 x 515 x 1050 9666 003 210

Accessories
Description Order number
1 x Fuel cap, lockable, with ventilation 1129 289 577
1 x Fuel cap, without lock, with vent 1129 200 042
2 x Console (on request) 9660 022 453
4 x Console rubber 9660 022 455
2 x Tightening strap (on request) 9660 022 454
2 x Tightening strap rubber 9660 000 703
1 x Tank sensor 9660 022 481
1 x Connection set 8730 102 488
1 x Blind cover 9660 001 906
1 x Fuel Anti-syphon 9668 010 090

22
Engine 1
Fuel tank

TGX, TGS, TGA


steel
suitable for TGX, TGS, TGA
Version 2 bayonet openings
Volume 400 l
Width 675 mm
Height 620 mm
Length 1050 mm
(Illustration similar) Order number
9666 003 205

Accessories
Description Order number
1 x Fuel cap, lockable, with ventilation 1129 289 577
2 x Console 9660 022 573
2 x Tightening strap 9660 022 574
2 x Tightening strap rubber 9660 000 703
4 x Console rubber 9660 022 455
1 x Tank sensor 5232 016 101
1 x Connection set (on request) 9660 221 550
1 x Blind cover 9660 001 906
1 x Fuel Anti-syphon 9668 010 090

Fuel tank
aluminium
suitable for TGX, TGS, TGA
Version with fuel cap

Volume l Dimensions mm Order number


300 675 x 620 x 820 (on request) 9668 006 200
400 675 x 620 x 1070 9661 070 620
600 675 x 620 x 1590 9661 600 625
780 675 x 620 x 2090 9661 610 460
800 675 x 620 x 2140 9661 610 490

Service parts
Description Order number
1 x Fuel cap, lockable, with ventilation 1129 289 577

Accessories
Description Order number
2 x Console 9660 860 210
4 x Console rubber 9660 860 070
2 x Tightening strap 9660 860 220
2 x Tightening strap rubber 9660 860 080
1 x Tank sensor 5232 016 101
1 x Connection set (on request) 9660 221 550
1 x Blind cover 9660 001 906
1 x Fuel Anti-syphon 9668 010 090
3 brackets will be needed for fuel tanks above 600 litres

www.europart.net 23
1
Drive
TGX, TGS, TGA

Ribbed V-belt
Profile PK

suitable for Length mm Number of ribs Order number


TGA, TGX 880 8 1867 080 880
TGX, TGS, TGA 1275 8 1851 698 161
TGA 1376 8 1867 081 376
TGX, TGS, TGA 1725 9 1100 282 514

Ribbed V-belt
Profile PK
Number of ribs 8
suitable for Length mm Order number
TGA 1375 1100 282 206
TGX, TGS, TGA 1480 9469 970 792
TGA 1635 1865 641 635
TGX, TGS, TGA 1920 3568 001 920

(Illustration similar)

Ribbed V-belt set


suitable for TGA
Scope of supply
1 x poly-V belt 8 PK 880, 1 x poly-V belt tensioner
Order number
(on request) 2547 006 000

Ribbed V-belt set


suitable for TGA
Scope of supply
1 x poly-V belt 8 PK 1376, 1 x poly-V belt tensioner
Order number
(on request) 2547 005 000

24
Drive 1

TGX, TGS, TGA


1 2 3 4
Poly-V belt tensioner
Illustration suitable for Pulley ∅ mm Height mm Order number
1 TGA 36 65/80 5930 000 519
2 TGX, TGS, TGA 74 34/84 5230 226 167
3 TGX, TGA 36 65/78 5930 000 518
4 TGX, TGS, TGA 74 34/90 5238 007 437

1 2 3
Deflection pulley/guide pulley
Illustration suitable for Pulley ∅ mm Height mm Order number
1 TGX, TGS 74.15 33.9 3563 860 050
2 TGX, TGS, TGA 65 36 5930 550 030
3 TGA 65 37 1911 043 017

Flywheel
suitable for TGA
Motor type D2866/D2876
Version for EDC
External diameter 430 mm
Order number
5230 000 227

www.europart.net 25
1
Drive
TGX, TGS, TGA

Flywheel
suitable for TGA
Motor type D2866/D2876
Version for EDC
External diameter 430 mm
Order number
9060 100 050

Accessories
Description Order number
1 x Flywheel ring 5231 225 733
1 x Guide bearing 8001 623 052
1 x Crankshaft seal 8022 505 245
10 x Attachment screw 5230 224 925

Flywheel
suitable for TGA
Motor type D 2876
External diameter 430 mm
Order number
9060 100 058

Flywheel
suitable for TGX, TGS
Motor type D2066
External diameter 430 mm
Order number
9751 601 063

Accessories
Description Order number
1 x Guide bearing 8001 623 052
1 x Crankshaft seal 8022 505 245
10 x Bolt 5230 224 946

26
Drive 1

TGX, TGS, TGA


Flywheel
suitable for TGS, TGA
Motor type D 2066/D 2676
External diameter 430 mm
Order number
9060 100 073

Accessories
Description Order number
1 x Guide bearing 8001 623 052
1 x Crankshaft seal 8022 505 245
10 x Bolt 5230 224 946

Flywheel
suitable for TGS, TGA
External diameter 430 mm
Scope of supply
with external ring gear
Order number
9060 100 072

Clutch kit
in exchange
suitable for TGS, TGA
Diameter 430 mm
Number of teeth 10
Scope of supply
clutch disc, automatic unit, release bearing
Order number Comparative number
9270 700 404 Sachs 3400 700 404

Clutch kit
for release fork with rollers
suitable for TGX, TGA
Diameter 430 mm
Number of teeth 10
Scope of supply
clutch disc, automatic unit, release bearing
Order number Comparative number
9750 700 381 Sachs 3400 700 381

www.europart.net 27
1
Drive
TGX, TGS, TGA

Clutch kit
as replacement
suitable for TGX, TGS, TGA
Diameter 430 mm
Number of teeth 10
Scope of supply
Disc, automatic unit, release bearing
Order number Comparative number
9270 700 402 Sachs 3400 700 402

Clutch kit
suitable for TGX, TGS, TGA
Diameter 430 mm
Number of teeth 10
Scope of supply
Disc, automatic unit, release bearing
Order number Comparative number
9750 700 460 Sachs 3400 700 460

Clutch kit
in exchange
suitable for TGX, TGS, TGA
Diameter 430 mm
Number of teeth 10
Scope of supply
disc, automatic unit, release bearing
Order number Comparative number
9750 000 153 Sachs 3400 700 459

Clutch kit
in exchange
suitable for TGA
Diameter 430 mm
Number of teeth 10
Scope of supply
disc, automatic unit, release bearing
Order number Comparative number
9270 127 401 Sachs 3400 127 401

28
Drive 1

TGX, TGS, TGA


Clutch kit
suitable for TGX, TGS, TGA
Diameter 430 mm
Number of teeth 10
Scope of supply
disc, automatic unit, release bearing
Order number Comparative number
9270 700 380 Sachs 3400 700 380

Release fork
suitable for TGX, TGA
Length 260 mm
Width 125 mm
Inner diameter 25 mm
Order number
5234 110 007

Release fork
for automatic gearbox
suitable for TGS, TGA
Order number
5231 266 918

Storage
for drive shaft
suitable for TGX, TGS, TGA
Inner ∅ mm Order number
65 9220 001 046
75 9220 001 088
85 6171 313 240

www.europart.net 29
1
Drive
TGX, TGS, TGA

Oil cooler
for Intarder
suitable for TGS, TGA
Length 360 mm
Width 180 mm
Depth 166 mm
Order number
(on request) 1911 333 007

Oil cooler
for retarder

suitable for Length mm Width mm Depth mm Order number


TGX, TGS, TGA 360 166 180 1911 333 004
TGS, TGA 350 175 170 1911 333 005

30
Servicehandbuch

Wir bieten Service zu


Ihrem Nutzen
Die neue Service-Bibel für Werkstätten ist die Krönung unseres Ringfeder
Online-Support.

Servicehandbuch sowie Montage-, Bedienungs- und Wartungsanleitungen


unter www.ringfeder.de.

www.ringfeder.de Member of VBG GROUP


1
Suspension
Parabolic spring
TGX, TGS, TGA

front axle
Form 1J
Number of leaves 2
Thickness 66 mm
Width 90 mm
Length front/rear 925/925 mm
Axle load 8t
suitable for Bushing front/rear mm Order number
TGX 24/63, 24/63 1073 046 000
TGX, TGS, TGA 24/60, 24/60 1073 028 000

Parabolic spring
front axle
Form 1J
Number of leaves 3
Width 90 mm
Length front/rear 925/925 mm
Bushing front/rear 24/63, 24/63 mm
suitable for Thickness mm Axle load t Order number
TGA 86 8 1072 930 000
TGX, TGS, TGA 89 9 1073 010 000
TGX, TGS, TGA 93 9 1072 994 000
TGX, TGS, TGA 95 9,5 1073 038 000

Parabolic spring
Front axle
suitable for TGA
Form 1J
Number of leaves 4
Thickness 106 mm
Axle load 9,5 t
Width 90 mm
Length front/rear 925/925 mm
Bushing front/rear 24/63, 24/63 mm
Order number
1072 990 000

32
Suspension 1
Spring hoop

TGX, TGS, TGA


suitable for TGX, TGS, TGA
Form 0
Interior width 91 mm

(Illustration similar)

Thread Length mm Order number


M18 x 2 205 1301 907 205

Accessories
Description Thread Spanner size mm Order number
Flat collar nut M18 x 2 27 5230 000 076

Parabolic spring
Rear axle
suitable for TGA
Form 8B
Number of leaves 2/1
Thickness 118 mm
Width 100 mm
Length at front/rear 825/825 mm
Axle load 11 t
Order number
1072 919 000

Parabolic spring
rear axle
suitable for TGA
Form 8B
Number of leaves 3/2
Width 100 mm
Length at front/rear 825/825 mm
Axle load t Thickness mm Order number
13 179 1072 917 000
16 195 1072 929 000

www.europart.net 33
1
Suspension
Spring leaf
TGX, TGS, TGA

rear axle
suitable for TGA
Length 263.9 mm
Width 147.2 mm
Thickness 124 mm
Distance between holes 178,9 mm
Installation side Order number
left 5232 100 555
right 5232 100 554

Spring hoop
suitable for TGA
Form 0
Thread M27 x 2
Interior width 101 mm

(Illustration similar)

Length mm Order number


340 1301 527 340
390 5231 150 390

Accessories
Description Thread Height mm Order number
Hexagon nut M27 x 2 40 1303 270 211

Air spring
suitable for TGA
Version without piston
External diameter 259 mm
Height 550 mm
Order number
1788 470 501

34
Suspension 1

TGX, TGS, TGA


Air spring
suitable for TGA
Version without piston
Outer ∅ mm Height mm Order number
220 513 1788 488 201
240 503 1788 488 401

This figure corresponds to 1788 488 201

Air spring
suitable for TGA
Version without piston
External diameter 240 mm
Height 518 mm
Order number
1788 488 301

Air spring
suitable for TGX, TGA
Version with steel piston
External diameter 260 mm
Height 278 mm
Order number
1788 488 205

Air spring bellows


suitable for TGS, TGA
External diameter 240 mm
Inner diameter 150.8 mm
Height 470 mm
Order number
1788 188 800

www.europart.net 35
1
Suspension
TGX, TGS, TGA

Shock absorber
suitable for TGA
Version oil pressure, twin-tube system
Fastening Pin/eye
Installation location front axle
Order number Comparative number
9200 131 750 Sachs 131 750

Shock absorber
Version Oil pressure, twin-tube system
Fastening Eye/eye
Installation location rear axle
suitable for Order number Comparative number
TGX, TGS, TGA 9200 131 696 Sachs 131 696
TGA 9200 000 735 Sachs 112 854

Shock absorber
Version oil pressure, twin-tube system
Fastening Pin/eye
Installation location front axle

This figure corresponds to 9202 809 300

suitable for Order number Comparative number


TGX, TGS, TGA (on request) 3563 952 736 Sachs 310 628
TGX, TGS, TGA 9202 809 350 Sachs 280 935
TGA 9202 809 300 Sachs 280 930

36
Suspension 1

TGX, TGS, TGA


Shock absorber
suitable for TGX, TGS, TGA
Version oil pressure, twin-tube system
Fastening eye/eye
Installation location front axle
Order number Comparative number
9270 311 478 Sachs 311 478
9270 311 480 Sachs 311 480
5230 285 424 Sachs 311 479

Shock absorber
suitable for TGS
Version oil pressure, twin-tube system
Fastening eye/eye
Installation location front axle
Order number Comparative number
5230 285 408 Sachs 311 488

Shock absorber
suitable for TGX, TGS, TGA
Version Oil pressure, twin-tube
Fastening Eye/eye
Installation location Rear axle
Order number Comparative number
9202 809 310 Sachs 280 931
9203 106 290 Sachs 310 629
9202 809 370 Sachs 280 937
9200 311 482 Sachs 311 482
9750 007 188 Sachs 311 483
9270 310 626 Sachs 310 626
9202 809 280 Sachs 280 928
9202 809 380 (on request) Sachs 280 938
5230 285 372 Sachs 300 001
9200 310 627 Sachs 310 627

www.europart.net 37
1
Axle and steering
TGX, TGS, TGA

Drag-link
suitable for TGX, TGS, TGA
Version torque strut
Installation location drop arm to the 1st front axle
Length 993 mm
Cone diameter 30 mm
Pipe diameter 52 mm
Order number
9079 990 592

Drag-link
suitable for TGS, TGA
Version pendulum rod
Length 967 mm
Cone diameter 30 mm
Pipe diameter 52 mm
Order number
9079 992 960

Drag-link
suitable for TGS, TGA
Version torque strut
Length 1021 mm
Cone diameter 30 mm
Pipe diameter 52 mm
Order number
9070 030 585

Steering Track Rod


suitable for TGX, TGS, TGA
Version guide rod, adjustable on one side
Length 1679 mm
Cone diameter 30 mm
Pipe diameter 50 mm
Order number
9079 925 212

38
Axle and steering 1

TGX, TGS, TGA


Steering Track Rod
suitable for TGS, TGA
Version guide rod, adjustable on one side
Length 1588 mm
Cone diameter 30 mm
Pipe diameter 52 mm
Order number
9070 900 056

Steering Track Rod


suitable for TGX, TGS, TGA
Version guide rod, adjustable on both sides
Length 1652 mm
Cone diameter 30 mm
Pipe diameter 50 mm
Order number
9070 900 017

Steering Track Rod


suitable for TGX, TGS, TGA
Version guide rod, adjustable on both sides
Length 1530 mm
Cone diameter 30 mm
Pipe diameter 50 mm
Order number Comparative number
9079 017 870 Lemförder 25276 01

Ball joint
for track rod/drag link
Cone diameter 30 mm

suitable for Threadtype Outer thread Length mm Order number


TGS, TGA right-hand thread M24 x 1.5/M30 x 1.5 120 9070 900 117
TGS, TGA left-hand thread M24 x 1.5/M30 x 1.5 120 9070 900 123
TGX, TGS, TGA right-hand thread M30 x 1.5 119 9079 911 393
TGX, TGS, TGA right-hand thread M30 x 1.5 150 9070 900 099

www.europart.net 39
1
Axle and steering
TGX, TGS, TGA

Ball joint
for track rod/drag link
suitable for TGX, TGS, TGA
Threadtype right-hand thread
Outer thread M30 x 1.5
Length 141 mm
Cone diameter 30 mm
Order number Comparative number
9079 991 567 Lemförder 25353 01

Power-steering pump
in exchange
suitable for TGA
Version hydraulic, clockwise rotation
Connection left
Thread M26 x 1.5
Order number Comparative number
9850 065 044 ZF 8001 494

Power-steering pump
in exchange
suitable for TGX, TGS, TGA
Version hydraulic
Connection Order number
left 9074 202 210
right 9074 202 310

Stabilizer mounting
suitable for TGX, TGS, TGA
Installation location rear axle
External diameter 68 mm
Length 126 mm
Bore hole diameter 15 mm
Distance between centres 100 mm
Order number
(on request) 6170 367 014
(Illustration similar)

40
Axle and steering 1

TGX, TGS, TGA


1 2 3 4

Stabilizer mounting
Illustration suitable for Installation Outer ∅ Inner ∅ Length Order number
location mm mm mm
1 TGX, TGS, TGA front axle 47 16 47 1593 000 130
1 TGX, TGS, TGA front axle 50 16 47 5237 220 059
2 TGX, TGS, TGA front axle 65 45 51 6170 643 810
3 TGX, TGA front axle 76 46 50 6170 367 007
4 TGX, TGS, TGA front axle 85 50 72 9290 002 121
1 TGX, TGS, TGA rear axle 68 22 62 5230 000 222
2 TGA Rear axle, inner 83 55 70 5230 000 224
2 TGX, TGS, TGA rear axle 90 60 61 5823 327 083

Stabiliser bearing section


Material rubber/metal

suitable for Installation Outer ∅ mm Inner ∅ mm Length mm Order number


location
TGA front axle 75 50 50 1599 004 100
TGX, TGS, TGA front axle 75 42 52 5231 285 496
TGS, TGA rear axle 78 59 60 9290 002 100

Double-joint drive shaft


in exchange
suitable for TGX, TGS, TGA
Installation location front axle
Scope of supply
without thrust washers

Version Installation side Length mm Order number


simple splines left 1252 5230 275 644
double splined right 1092 5230 275 643

www.europart.net 41
1
Axle and steering
Inner ring
TGX, TGS, TGA

for drive shaft


suitable for TGX, TGS, TGA
Dimensions 45 x 50 x 55 mm
Order number
9220 000 295

Repair kit
for drive shaft bearing
suitable for TGX, TGS, TGA
Scope of supply
2 needle roller bearings, 4 axial seals
Order number
9030 001 250

Repair kit
for stabiliser
suitable for TGA
Installation location front
Order number
1593 101 533

Repair kit
kingpin
suitable for TGX, TGS, TGA
Bolt diameter 50/64 mm
Bolt length 119 mm
Scope of supply
1 axle bolt, 1 sealing ring, 1 bush, 1 shaft sealing ring, 1 snap ring, 1 screw plug
Order number
1583 005 100

Repair kit
kingpin
suitable for TGS, TGA
Bolt diameter 50 mm
Bolt length 109 mm
Scope of supply
2 kingpins, 2 bushes, 2 needle roller bearings, 1 thrust washer, 3 sealing washers,
5 axial seals, 2 socket screws, 1 retaining ring, 1 snap ring
Order number
1583 000 560

42
Axle and steering 1
Repair kit

TGX, TGS, TGA


kingpin
suitable for TGX, TGA
Bolt diameter 53 mm
Bolt length 240 mm
Scope of supply
1 kingpin, 4 sealing washers, 2 needle roller bearings , 2 wear washers, 2 grease
nipples, 2 covers, 2 retaining rings
Order number
5232 056 031

Wheel hub
suitable for TGX, TGS, TGA
Installation location rear axle
Order number
1325 067 611

Wheel bearing set


suitable for TGX, TGS, TGA
Installation location rear axle
External diameter 160 mm
Inner diameter 140 mm
Height 105 mm
Scope of supply
with O-ring
Order number
5234 200 342

Compact bearing
suitable for TGX, TGS, TGA
Installation location front axle
Version with pulse wheel
Order number
8001 000 210

Tapered roller bearing


suitable for TGA
Outer ∅ mm Inner ∅ mm Height mm Order number
180 100 37 8001 302 202
170 110 47 8001 330 222

www.europart.net 43
1
Axle and steering
Shaft sealing ring
TGX, TGS, TGA

for wheel hub


suitable for TGA
Installation location rear axle
External diameter 175 mm
Inner diameter 145 mm
Height 14 mm
Order number
8002 000 031

Shaft sealing ring


for wheel hub
suitable for TGX, TGS, TGA
Installation location rear axle inner, with ABS pulse wheel
External diameter 172 mm
Inner diameter 132 mm
Height 12 mm
Order number
5235 030 333

Shaft sealing ring


for wheel hub
suitable for TGX, TGS, TGA
Installation location Rear axle, outer
External diameter 160 mm
Inner diameter 132 mm
Height 10 mm
Order number
8002 536 787

Grooved ball bearing


suitable for TGX, TGS
Type 6305 2RS1
External diameter 62 mm
Inner diameter 25 mm
Order number
8001 630 520

Repair kit
for wheel hub
suitable for TGX, TGA
Installation location Rear axle
External diameter 145 mm
Inner diameter 115 mm
Height 32 mm
Order number
1590 362 730

44
Axle and steering 1
Axle nut

TGX, TGS, TGA


suitable for TGX, TGS, TGA
Thread Order number
M58 x 1.5 5236 200 086
M100 x 1.5 5236 200 092

'A' frame
suitable for TGX, TGS, TGA
Installation location Rear axle
Length 627 mm
Bore hole diameter 25 mm
Pipe diameter 48 mm
Distance between holes 125 mm
Order number
9070 001 019

'A' frame
suitable for TGX, TGS, TGA
Installation location rear axle
Length 627 mm
Bore hole diameter 25 mm
Pipe diameter 48 mm
Distance between holes 152/130 mm
Order number
9070 027 709

'A' frame
suitable for TGX, TGS, TGA
Version with molecular bearing
Length 627 mm
Bore hole diameter 23 mm
Pipe diameter 48 mm
Distance between holes 130 mm
Order number
5220 090 058

www.europart.net 45
1
Axle and steering
'A' frame
TGX, TGS, TGA

suitable for TGS


Installation location Rear axle
Length 627 mm
Bore hole diameter 25 mm
Pipe diameter 48 mm
Distance between holes 152 mm
Order number
5220 090 027

Repair kit
for "A" frame
suitable for TGA
Version with molecular bearing
Bore hole diameter 25 mm
Distance between holes 130 mm
Order number Comparative number
9070 025 157 Lemförder 25157 01

Repair kit
for "A" frame
suitable for TGX, TGS, TGA
Version with molecular bearing
Distance between holes mm Bore hole ∅ mm Order number
130 24 9463 504 805
152 25 9070 310 410

Repair kit
for central joint
suitable for TGA
Inner thread M24 x 1.5
External diameter 90 mm
Height 60 mm
Order number
9077 200 400

46
Axle and steering 1
Trailing arm

TGX, TGS, TGA


suitable for TGS
Installation location front axle
Version with molecular bearing
Length 941 mm
Pipe diameter 48 mm
Bore hole diameter 17 mm
Distance between holes 115 mm
Order number
5230 283 278

Trailing arm
suitable for TGX, TGS, TGA
Installation location rear axle
Version with molecular bearing
Length 572 mm
Pipe diameter 48 mm
Bore hole diameter 19 mm
Distance between holes 130 mm
Order number
9070 001 030

Trailing arm
Installation location Rear axle
Version with molecular bearing
Pipe diameter 48 mm
Bore hole diameter 19 mm
Distance between holes 130 mm
suitable for Length mm Order number
TGX, TGA 531 5210 090 177
TGX, TGS, TGA 566 9070 000 220
TGA 571 9070 007 901
TGX, TGS, TGA 572 9070 000 221
TGX, TGS, TGA 596 9070 025 042

Trailing arm
suitable for TGX, TGS, TGA
Installation location rear axle
Version both sides
Length 414 mm
Pipe diameter 50 mm
Bore hole diameter 23 mm
Distance between holes 130 mm
Order number
5210 090 176

www.europart.net 47
1
Axle and steering
TGX, TGS, TGA

Repair kit
for trailing arm
suitable for TGX, TGS, TGA
Version with molecular bearing
Bore hole diameter 19 mm
Distance between holes 130 mm
Order number
9070 001 032

Repair kit
for axle strut
suitable for TGA
Installation location Rear axle, top
Bore hole diameter 19 mm
Distance between holes 130 mm
Thickness 24 mm
Order number
9070 002 140

Repair kit
for trailing arm
suitable for TGX, TGS, TGA
Version with molecular bearing
Bore hole diameter 19 mm
Distance between holes 130 mm
Order number Comparative number
9079 991 635 (on request) Lemförder 21184 01

Four-point link
not adjustable
suitable for TGX, TGS, TGA
Version with molecular bearing
Length 572 mm
Bore hole diameter 25 mm
Distance between holes 130 mm
Order number Comparative number
9079 991 568 Lemförder 27601 01

Accessories
Description Order number
Repair kit, for four-point link, molecular bearing 9070 030 751

48
Axle and steering 1
Wheel bolt

TGX, TGS, TGA


suitable for TGX, TGS, TGA

Installation location Outer thread Length mm Order number


front axle M20 x 1.5 72 2213 002 753
front axle M22 x 1.5 65 2213 002 751
rear axle M22 x 1.5 79 3167 010 174
rear axle M22 x 1.5 110 2213 002 700
rear axle M22 x 1.5 120.5 2213 002 752

Wheel nut
suitable for TGX, TGS, TGA
for steel and aluminium wheels
Standard DIN 74361
Thread M22 x 1.5
Spanner size 32
Height 27 mm
Surface Order number
phosphated 1303 221 551
GEOMET® 500 A 1303 221 552

Our network – 200 locations


in 28 countries
EUROPART – the international
partner for the workshop

www.europart.net

www.europart.net 49
1
Braking system
TGX, TGS, TGA

1 2 3

Brake disc
suitable for TGX, TGS, TGA
Installation location Front axle
Version internally ventilated
Thickness 45 mm
Illustration Outer ∅ mm Height mm Hole circle ∅ mm Number of holes Order number
1 377 110.5 144 12 2072 377 002
2 432 130 168 12 2072 432 004
3 432 119 230 16 2072 432 006

Brake disc
suitable for TGX, TGS, TGA
Installation location rear axle
Version internally ventilated
External diameter 432 mm
Height 135 mm
Thickness 45 mm
Diameter of hole circle 235 mm
Number of holes 10
Order number
2072 432 005

Suitable brake piston resetting tools available from EUROPART!

Bolt
suitable for TGS, TGA
Thread M14 x 1.5
Length 50 mm
Property class 10.9
Order number
6621 014 050

50
Braking system 1
TORX® bolt

TGX, TGS, TGA


suitable for TGX, TGS, TGA
Property class 10.9
Surface phosphated

Thread Length mm Tightening torque Nm Order number


M16 x 1.5 55.5 480 5239 022 812
M16 x 1.5 100 360 5230 251 896
M18 x 1.5 60 480 1593 101 524

Brake pad set


Front axle/rear axle
suitable for TGA
Brake system D-ELSA 1
WVA no. 29030
Contents of set 4
Coating length 249,5 mm
Lining width 118,2 mm
Lining thickness 28.20 mm
Scope of supply
with accessories
Order number
2129 030 009

Brake pad set


Front axle/rear axle
suitable for TGA
Brake system D-ELSA 2
WVA no. 29131
Contents of set 4
Coating length 249,3 mm
Lining width 117,9 mm
Lining thickness 30.20 mm
Scope of supply
with accessories
Order number
2129 131 604

www.europart.net 51
1
Braking system
TGX, TGS, TGA

Brake pad set


suitable for TGX, TGS, TGA
Contents of set 4
Lining thickness 30.00 mm
Scope of supply
with accessories

Installation location Brake system WVA no. Coating length Lining width Order number
mm mm
front axle Knorr SB 6000 29095 210,6 92,5 2129 095 006
Front axle/rear axle SB/SN 7 29061 247,5 109,5 2323 405 206

Brake pad set


suitable for TGX, TGS, TGA
Brake system SB/SN 7
WVA no. 29059
Contents of set 4
Coating length 247,5 mm
Lining width 109,5 mm
Lining thickness 30.00 mm
Application range
specifically for short-distance use
Scope of supply
with accessories
Order number
2323 405 207

Brake caliper
suitable for TGX, TGS, TGA
Brake system ELSA 1
Installation side Order number Comparative number
left 7650 000 019 Meritor RX93.08.017
right 7650 000 020 Meritor RX93.08.018

Accessories
Description Order number
Brake anchor plate 1509 010 210
Repair kit 1509 015 050

52
Braking system 1

TGX, TGS, TGA


Brake caliper
suitable for TGA
Brake system ELSA 2
Version 5°, without brake lining
Installation side Order number Comparative number
left 7650 000 041 Meritor LRG544
right 7650 000 042 Meritor LRG545

Accessories
Description Order number
Brake caliper carrier (on request) 1509 015 400
Repair kit 1509 015 405

Repair kit
for brake callipers
suitable for TGA
Version rubber bush (only for brake calliper with rubber
guide)
Order number Comparative number
1509 015 052 Meritor MCK1103

Repair kit
for brake calipers
suitable for TGA
Version guidance system
Order number Comparative number
1509 015 410 Meritor MCK1243

www.europart.net 53
1
Braking system
TGX, TGS, TGA

Brake caliper
suitable for TGX, TGS, TGA
Installation location front axle
Version standardised

Type Installation side Order number Comparative number


SN7219RC left 3450 414 779 Knorr K003816
SN7209RC right 3450 414 778 Knorr K003815

Accessories
Description Order number
Pressure pad set 3400 110 013
Guide sealing set 5034 343 812
Adjuster cap set 3411 000 290

Brake caliper
suitable for TGX, TGS
Installation location rear axle
Version standardised

Type Installation side Order number Comparative number


SN7197RC left 3450 414 774 Knorr K003811
SN7217RC right 3450 414 775 Knorr K003812

Accessories
Description Order number
Pressure pad set 3400 110 013
Guide sealing set 5034 343 812
Adjuster cap set 3411 000 290

Brake anchor plate


suitable for TGX, TGS, TGA

Brake system Installation location Order number Comparative number


Knorr SB/SN 6 Front axle/rear axle 3400 046 948 Knorr K002979
Knorr SB/SN 7 rear axle 3450 412 140 Knorr K001278

54
Braking system 1

TGX, TGS, TGA


Brake caliper
MAXX 22
suitable for TGX, TGS
Version without lining

Installation side Order number Comparative number


front, left 3803 220 300 WABCO 640 322 031 0
front, right 3803 220 320 WABCO 640 322 032 0
rear, left 3803 220 340 WABCO 640 322 034 0
rear, right 3803 220 350 WABCO 640 322 035 0

Accessories
Repair kit
Description Order number
Brake pad set 3803 229 332
seal and guide kit 3803 229 262
resetting unit 3803 229 272
wear indicator (CWS) 3803 229 282
pressure plate 3803 229 312
gasket set 3803 229 322

Tool set
Description Order number
Base 3801 955 222
MAXX 22 (Only together with Base tool set) 3803 225 222

1 2

Brake drum
Number of holes 10
Inner diameter 410 mm
Diameter of hole circle 335 mm
Hub diameter 298 mm
Illustration suitable for Installation location Brake path mm Order number
1 TGS, TGA front axle 172 2072 410 016
2 TGX, TGS, TGA front axle 187 2072 410 018
1 TGX, TGS, TGA rear axle 192 2072 410 002
1 TGX, TGS, TGA rear axle 234 2030 410 508

www.europart.net 55
1
Braking system
TGX, TGS, TGA

1 2 3

Brake lining set


suitable for TGX, TGS, TGA
Lining thickness 17.00 mm
Contents of set 8
Illustration WVA no. Dimensions mm Order number
1 19494 410 x 163 2119 486 008
2 19495 410 x 183 2119 487 008
3 19496 410 x 223 2119 488 008

Brake shoe
suitable for TGX, TGS, TGA
Scope of supply
without brake lining

Version Brake size Order number


without bore for wear indicator 410 x 180 1593 104 300
with bore for wear indicator 420 x 220 1593 106 200

Brake pad rivet


suitable for TGX, TGS, TGA
Diameter 8 mm
Length 18 mm
Material steel
Order number
2101 081 880

56
Braking system 1
Brake camshaft

TGX, TGS, TGA


suitable for TGX, TGS, TGA
Length 544 mm
Installation side Form Order number
left Z 1593 102 100
right S 1593 102 200

Repair kit
for brake shaft bearing
Installation location Order number
Front axle 1587 209 999
Rear axle 1597 201 250

This figure corresponds to 1597 201 250

1 2 3 4 5 6

Slack adjuster
suitable for TGX, TGS, TGA
Version automatic
Bore hole diameter 14 mm
Distance between holes 145 mm
Number of holes 1
Number of teeth 26
Illustration Form Order number Comparative number
1 left offset, -56 mm 3400 801 800 Haldex 80180C
2 right offset, +56 mm 3400 801 810 Haldex 80181C
3 left offset, -56 mm 3400 801 760 Haldex 80176C
4 right offset, +56 mm 3400 801 770 Haldex 80177C
5 right offset, +37 mm 3400 801 780 Haldex 80178C
6 left cropped, -37 mm 3400 801 790 Haldex 80179C

www.europart.net 57
1
Braking system
TGX, TGS, TGA

1 2 3 4 5 6

Slack adjuster
suitable for TGA
Version automatic
Bore hole diameter 14 mm
Distance between holes 145 mm
Number of holes 1
Number of teeth 26
Illustration Form Order number Comparative number
2 left offset, -18 mm 3400 072 300 Haldex 79211C
1 right offset, +18 mm 3400 072 200 Haldex 79210C
3 left offset, -56 mm 3400 723 030 Haldex 79208C
4 right offset, +56 mm 3400 723 040 Haldex 79209C
5 left offset, -56 mm 3400 720 130 Haldex 79206C
6 right offset, +56 mm 3400 720 120 Haldex 79205C

Brake pad sensor


for brake lining wear indicator
suitable for TGX, TGS, TGA
Version electronic, without control wire
Number of teeth 26
Order number Comparative number
3400 919 350 Haldex 91935
3400 919 360 Haldex 91936

Brake pad sensor


for brake lining wear indicator
suitable for TGA

This figure corresponds to 1509 015 553

Length mm Colour Order number Comparative number


1350 black 1509 024 786 Meritor 68326720
1750 green 1509 015 553 Meritor 68326723

58
1910

1920

1930

1940

1950

1960

1970

1980

1990

2000

2010

2020
1. April
Renault Magnum

Bremst länger als Du


auf dem Bock sitzt!

Beste Bremstechnologie seit 100 Jahren.


www.100.textar.com
1
Pneumatic system
TGX, TGS, TGA

Air dryer
1-chamber system with integrated pressure regulator
suitable for TGX, TGS, TGA
Connection 1: M22 x 1,5
21: M22 x 1,5, VOSS 232
22: M16 x 1,5, VOSS 232
Operating pressure max. 13 bar
Cut-off pressure 12,5 ± 0,2 bar
Version Order number Comparative number
without heating 0174 107 200 WABCO 432 410 720 0
with heating 0174 107 350 WABCO 432 410 735 0

Air dryer
in exchange
1-chamber system with integrated pressure regulator
suitable for TGX, TGS, TGA
Connection 1: M22 x 1,5
21: M22 x 1,5, VOSS 230
22: M16 x 1,5, VOSS 230
Operating pressure max. 13 bar
Cut-off pressure 12,5 ± 0,2 bar
Version Order number Comparative number
without heating 0174 101 137 WABCO 432 410 113 7
with heating 0174 101 127 WABCO 432 410 112 7

Air dryer
as replacement
suitable for TGX, TGS, TGA
Operating pressure max. 13 bar
Thread M39 x 1.5
Replacement for 432 410 020 2
Order number Comparative number
3419 851 271 WABCO 432 410 222 7

60
Pneumatic system 1

TGX, TGS, TGA


Air dryer
ASP (Air System Protector)
suitable for TGX, TGS, TGA
Operating pressure max. 13 bar
Thread M39 x 1.5
Order number Comparative number
0179 012 232 WABCO 432 901 223 2

Four-circuit protection valve


suitable for TGX, TGS, TGA
Connection M22 x 1.5/M16 x 1.5
Operating pressure max. 13 bar
Opening pressure 21,22,24: 6,9-0,3 bar
23: 7,0-0,3 bar
Closing pressure 21-24: >= 5 bar
Order number Comparative number
3807 144 000 WABCO 934 714 400 0

Four-circuit protection valve


Connection 21-24: M16 x 1,5
Operating pressure max. 13 bar
Opening pressure 21,22,24: 6,9-0,3 bar
23: 7,0-0,3 bar

suitable for Closing pressure Order number Comparative number


TGA 21-24: >= 5 0577 141 090 WABCO 934 714 109 0
TGX, TGS, TGA 21-24: >= 6,4 0577 141 100 (on request) WABCO 934 714 110 0

www.europart.net 61
1
Pneumatic system
TGX, TGS, TGA

Blowoff valve
suitable for TGX, TGS, TGA
Operating pressure max. 20 bar
Nominal width 10
Connection M22 x 1.5

suitable for Outlet pressure bar Setting range bar Order number Comparative number
TGX, TGS, TGA 9,5 ±0,3 9,8-12,5 0390 103 330 WABCO 475 010 333 0
TGA 10 ±0,3 9,6-12 0390 103 010 WABCO 475 010 301 0

Blowoff valve
in exchange
suitable for TGX, TGS, TGA
Operating pressure max. 20 bar
Outlet pressure 8,5 ± 0,3 bar
Setting range 5,8-10,8 bar
Nominal width 10
Connection 1 VOSS plug-type connection 230
Connection M22 x 1,5 VOSS NG
Order number Comparative number
0390 103 007 WABCO 475 010 300 7

Blowoff valve
suitable for TGA
Operating pressure max. 10 bar
Outlet pressure 0,7 ±0,1 bar
Nominal width 12,5
Connection M12 x 1,5
Order number Comparative number
0390 090 080 WABCO 475 009 008 0

62
1
Pneumatic system
TGX, TGS, TGA

Blowoff valve
suitable for TGS, TGA
Operating pressure max. 10 bar
Outlet pressure 7,4 + 0,2 bar
Setting range 4,0-8,0 bar
Nominal width 10
Connection M22 x 1.5
Order number Comparative number
3600 011 912 Knorr 0481009050000

Double shut-off valve


suitable for TGA
Operating pressure max. 10 bar
Temperature range -40 to +80 °C
Nominal width 10
Connection M22 x 1.5
Order number Comparative number
0195 000 030 WABCO 434 500 003 0

Non-return valve
suitable for TGA
Operating pressure 18 bar
Nominal width 8
Connection M22 x 1,5
Order number Comparative number
0190 140 000 WABCO 434 014 000 0

Compressed air tank


EN 286-2, steel
suitable for TGX, TGS, TGA
Version with bracket
Volume 5l
Diameter 154 mm
Length 341 mm
Connection 3 x M22 x 1.5
Operating pressure 10 bar
Order number
3620 001 545

64
Pneumatic system 1

TGX, TGS, TGA


Compressed air tank
EN 286-2, steel
suitable for TGX, TGS, TGA
Connection 4 x M22 x 1.5
Operating pressure max. 15.5 bar
Volume l ∅ mm Length mm Order number
10 206 368 3620 020 610
25 246 599 3620 024 625
40 276 758 3620 027 640

Compressed air tank


to EN 286-2, Aluminium
suitable for TGX, TGS, TGA
Connection 2 x M22 x 1.5
Operating pressure max. 12.5 bar

Volume l ∅ mm Length mm Order number


20 246 500 1740 200 024
30 246 720 1742 302 460
40 276 770 1742 402 760

Air reservoir tensioning strap


with bracket, 1-piece
suitable for TGX, TGS, TGA
∅ mm Order number
206 1740 012 060
246 1740 022 460
276 1740 032 760

Accessories
Description Length mm Material Order number
Tensioning strap base 1000 rubber 9085 413 340

www.europart.net 65
1
Pneumatic system
TGX, TGS, TGA

Compressor
suitable for TGA
Version water cooled, 1 cylinder
Capacity 359 cm³
cooling water connection M16 x 1.5
Order number Comparative number
3400 015 948 Knorr K071289X00

Compressor
in exchange
without pressure relief valve
suitable for TGA
Version water cooled, 2 in-line cylinders
Order number
1911 287 678

Cylinder head
suitable for TGA
Order number Comparative number
0061 008 052 WABCO 412 100 806 2
0060 908 032 WABCO 412 090 803 2

Hand brake valve


suitable for TGX, TGS, TGA
Connection M16 x 1.5 VOSS
Catch position 85°
Operating pressure max. 10 bar
Version with electrical switch
Order number Comparative number
0607 231 180 WABCO 961 723 118 0

66
Pneumatic system 1

TGX, TGS, TGA


Rapid bleeder valve
Connection M22 x 1,5

suitable for Operating pressure bar Order number Comparative number


TGX, TGS, TGA max. 10 0385 012 030 WABCO 473 501 203 0
TGS, TGA max. 12,5 0645 000 420 (on request) WABCO 973 500 042 0

2-way valve
suitable for TGA
Connection M16 x 1,5/M14 x 1,5/M22 x 1,5
Order number Comparative number
0192 080 540 WABCO 434 208 054 0

EBS foot brake module

suitable for Type Operating pressure bar Order number Comparative number
TGA EBS 2 13 3450 403 405 Knorr K039530N50
TGX, TGS, TGA EBS 5X max. 12,5 3413 447 771 Knorr K039569N50

Trailer control valve


in exchange
suitable for TGX, TGS, TGA
Version lead at 0 bar, adjustable
Connection VOSS insert union
Operating pressure max. 8,5 bar
Order number Comparative number
0640 090 065 WABCO 973 009 006 7

www.europart.net 67
1
Pneumatic system
TGX, TGS, TGA

1 2

EBS trailer modulator


suitable for TGX, TGS, TGA
Illustration Type Order number Comparative number
1 EBS 2,3 3450 403 530 Knorr 0486205022N50
2 EBS 5X 5233 016 212 Knorr K020623N50

1 2

EBS single channel module


suitable for TGX, TGS, TGA
Installation location front axle
Illustration Type Order number Comparative number
1 EBS 2.2 3450 403 485 Knorr 0486203023N50
2 EBS 5X 5230 292 192 Knorr K021204N50

1 2

EBS two channel module


suitable for TGX, TGS, TGA
Installation location Rear axle
Illustration Type Order number Comparative number
1 EBS 2,3 3450 403 520 Knorr 0486204017N50
2 EBS 5X 3400 092 150 Knorr K020024N50

68
Pneumatic system 1

TGX, TGS, TGA


Solenoid valve
3/2 way
suitable for TGX, TGS, TGA
Version ventilated
Connection M12 x 1,5, bayonet (DIN)
Nominal width 2,2 mm
Voltage 24 V
Order number Comparative number
0370 726 280 WABCO 472 072 628 0

Relay valve
suitable for TGX, TGS, TGA
Thread VOSS 230
Connection electric, bayonet (DIN)
Connection 1-2 M22 x 1,5
Connection 3 with muffler
Connection 4 M16 x 1,5
Order number Comparative number
0640 060 037 WABCO 973 006 003 0

Relay valve
suitable for TGX, TGS, TGA
Connection thread M22 x 1,5

Lead bar Operating pressure bar Order number Comparative number


0 8 0640 030 020 WABCO 973 003 002 0
0,4 max. 10 0640 030 070 WABCO 973 003 007 0

www.europart.net 69
1
Pneumatic system
TGX, TGS, TGA

Solenoid control valve


for ABS
suitable for TGX, TGS
Voltage 24 V
Connection electric, bayonet (DIN)
Connection thread M22 x 1.5 JED-388
Operating pressure max. 11 bar
Electric current 1,65 A
Protection class IP67
Order number Comparative number
0371 950 087 WABCO 472 195 016 0

Overflow valve
suitable for TGX, TGS, TGA
Version with limited return flow
Operating pressure max. 10 bar
Setting range 5,3-7 bar
Connection thread M22 x 1,5
Nominal width 8
Oveflow pressure 6.4 bar
Order number Comparative number
0191 002 280 WABCO 434 100 228 0

Overflow valve
suitable for TGA
Version with return flow
Operating pressure max. 13 bar
Setting range 7,3-8,5 bar
Connection thread M22 x 1,5
Nominal width 8
Oveflow pressure 7.3 bar
Order number Comparative number
0191 000 330 (on request) WABCO 434 100 033 0

ABS mini sensor


S plus Axial Mini
suitable for TGX, TGS, TGA
Installation location front axle/rear axle
Length 2065 mm
Installation side Order number Comparative number
left 0210 322 830 WABCO 441 032 296 0
right 0210 322 840 WABCO 441 032 297 0

70
Pneumatic system 1

TGX, TGS, TGA


ABS mini sensor
S plus Axial Mini
suitable for TGX, TGS, TGA
Installation location rear axle
Length 2595 mm

Installation side Order number Comparative number


left 0210 322 650 WABCO 441 032 298 0
right 0210 322 860 WABCO 441 032 299 0

Membrane brake cylinder


Type 24
suitable for TGX, TGS, TGA
Installation location front axle
Connection M22 x 1,5
Stroke 64 mm
Length of piston rod 15 mm
Application range
vehicles with disc brakes

Installation side Type number Order number Comparative number


left BS2514 3450 409 685 Knorr K002843
right BS2515 3450 409 690 Knorr K002844

Membrane brake cylinder


Type 24
suitable for TGX, TGS, TGA
Installation location front axle
Connection M22 x 1,5
Stroke 75 mm
Length of piston rod 20 mm
Application range
vehicles with disc brakes

Installation side Type number Order number Comparative number


left BS3537 3450 408 740 Knorr K015590
right BS3536 3450 408 735 Knorr K015589

www.europart.net 71
1
Pneumatic system
TGX, TGS, TGA

Combination brake cylinder


Type 24/30
suitable for TGX, TGS
Version with welded fork head and bellows
Installation location rear axle
Connection M22 x 1,5, VOSS NG 12
Stroke 65/65 mm
Length of piston rod 75 mm
Application range
Vehicles with S-cam brakes
Order number Comparative number
0554 215 400 WABCO 925 421 540 0

Combination brake cylinder


Type 20/24HFL1
suitable for TGS, TGA
Installation location 1st rear axle
Connection M22 x 1,5, VOSS NG12
Stroke 64/64 mm
Length of piston rod 15 mm
Application range
vehicles with disc brakes

Installation side Type number Order number Comparative number


left BS8414 3450 409 700 Knorr K007669
right BS8413 3450 409 695 Knorr K007668

Combination brake cylinder


Type 20/24HFL1
suitable for TGA
Installation location 2nd rear axle
Connection M22 x 1.5 (N10164-NG12)/M22 x 1.5 (N10164-NG12)
Stroke 74/74 mm
Length of piston rod 20 mm
Application range
vehicles with disc brakes

Installation side Type number Order number Comparative number


left BS9433 3400 007 661 Knorr K007661
right BS9434 3450 408 705 Knorr K007662

72
Pneumatic system 1

TGX, TGS, TGA


Combination brake cylinder
Type 20/24HFL3
suitable for TGX, TGA
Installation location rear axle
Connection M22 x 1,5, VOSS NG 12
Stroke 64/64 mm
Length of piston rod 15 mm
Application range
vehicles with disc brakes

Installation side Type number Order number Comparative number


left BS8426 3400 584 260 Knorr K007677
right BS8427 3400 046 611 Knorr K007678

Combination brake cylinder


in exchange
Type 24/24HF
suitable for TGA
Installation location 1st and 2nd rear axle
Connection M22 x 1,5, VOSS NG 12
Stroke 57/57 mm
Length of piston rod 75 mm
Application range
Vehicles with S-cam brakes
Order number
3405 941 000

Switching device
suitable for TGA
Order number Comparative number
3400 627 496 Knorr 627496AM

Clutch master cylinder


suitable for TGA
Bore hole diameter 23.81/40 mm
Material plastic
Operating liquid mineral oil
Application range
vehicles with compressed air support
Order number
5237 156 154

www.europart.net 73
1
Pneumatic system
TGX, TGS, TGA

Clutch actuator
suitable for TGX, TGS, TGA
Version electronic
Operating pressure max. 10 bar
Operating liquid mineral oil
Order number Comparative number
3400 158 740 Knorr K015874N50

Clutch servo
suitable for TGX, TGS, TGA
Operating pressure max. 10 bar
Stroke 85 mm
Operating liquid mineral oil
Order number Comparative number
3800 514 060 WABCO 970 051 466 0

Clutch servo
suitable for TGA
Operating pressure max. 10 bar
Stroke 85 mm
Operating liquid mineral oil
Order number Comparative number
0730 514 120 WABCO 970 051 412 7

Clutch servo
suitable for TGA
Operating pressure max. 10 bar
Stroke 85 mm
Operating liquid mineral oil
Order number Comparative number
0730 514 320 WABCO 970 051 432 0

74
Pneumatic system 1
Pressure switch

TGX, TGS, TGA


for brake hydraulics
Version pneumatic
Connection 3-pole, bayonet
Inner thread M12 x 1.5
Voltage 24 V

suitable for Operating pressure bar Order number


TGX, TGS, TGA max. 10 9500 495 273
TGA max. 5,4 5232 552 001

Accessories
Description Order number
Bush housing with round sleeve 9501 246 056

Muffler
suitable for TGA
Diameter 69 mm

Operating pressure bar Height mm Connection Order number Comparative number


max. 13 45/56.5 M22 x 1.5 0174 070 000 WABCO 432 407 060 0
11 53 Snap contour 0174 070 700 WABCO 432 407 070 0

Muffler
attachment with additional clamp
suitable for TGA
Operating pressure 18,5 bar
Diameter 87 mm
Height 62 mm
Connection Snap contour
Order number Comparative number
0174 070 120 WABCO 432 407 012 0

Working cylinder
for engine brake
Diameter of hole circle 8,3 mm

suitable for Outer thread Outer ∅ mm Order number


TGX, TGS, TGA M8 x 1 44 5237 016 124
TGA M10 x 1 54 3461 100 000

www.europart.net 75
1
Pneumatic system
Coupling head
TGX, TGS, TGA

automatic
Application range
for tractor truck

Description Connection thread Colour Operating pressure bar Order number


brake line M16 x 1.5 yellow 10 3700 000 011
brake line M22 x 1.5 yellow 8 3700 000 013
supply line M16 x 1.5 red 10 3700 000 012
supply line M22 x 1.5 red 8 3700 000 014

Coupling head
automatic
Version supply line
Connection thread 2 x M16 x 1.5
Operating pressure max. 10 bar
Colour red
Order number
3700 000 008

Fast-action coupling
for DuoMatic
Version Vehicle part
Connection thread M16 x 1.5
Application range
for tractor vehicles with semi-trailer
Order number Comparative number
0248 050 040 WABCO 452 805 004 0

Fast-action coupling
for DuoMatic
Version rigid truck part
Connection thread M16 x 15
Application range
for tractor units with trailer
Order number Comparative number
0248 020 090 WABCO 452 802 009 0

76
Pneumatic system 1

TGX, TGS, TGA


ECAS path sensor
for air suspension
suitable for TGX, TGS, TGA
Connection bayonet DIN 72585-A1-2.1-Sn/K2
Order number Comparative number
0210 500 120 WABCO 441 050 012 0

ECAS path sensor


with lever
suitable for TGX, TGS, TGA
Connection Bayonet DIN 72585-A1-2.1-Sn/K2
Order number Comparative number
0210 501 230 WABCO 441 050 123 0

ECAS solenoid valve


suitable for TGX, TGS, TGA
Installation location rear axle, tag axle
Version with noise reducer, solenoid connection at top
Connection electric, 2 x bayonet (DIN)
Connection thread M22 x 1.5, VOSS 230
Operating pressure max. 5-13 bar
Voltage 24 V
Order number Comparative number
0379 051 110 WABCO 472 905 111 0

www.europart.net 77
1
Pneumatic system
TGX, TGS, TGA

ECAS solenoid valve


suitable for TGX, TGS, TGA
Installation location rear axle
Version 3 magnets, with silencer
Connection electric, bayonet (DIN)
Connection thread M22 x 1.5, Voss 230
Operating pressure max. 5-13 bar
Voltage 24 V
Order number Comparative number
0379 000 530 WABCO 472 900 053 0

ECAS solenoid valve


suitable for TGX, TGA
Operating pressure max. 5-13 bar
Voltage 24 V
Order number Comparative number
6001 343 254 WABCO 472 880 001 0

ECAS operating unit


suitable for TGX, TGS, TGA
Version control unit for front axle/rear axle
Number of poles 4
Voltage 24 V
Order number Comparative number
0760 561 390 WABCO 446 056 139 0

Accessories
Description Order number
Fastening for ECAS 0760 560 104

78
1
Pneumatic system
Assortment case
TGX, TGS, TGA

for VOSS connector system 230, complete


Version Order number
42-piece 0307 001 415

Contents
Number Description Dimensions mm Order number
2 Straight connector NG 8, Pipe connector 6 x 1 0307 000 050
2 Straight connector NG 8, Pipe connector 9 x 1,5 0307 000 350
2 Straight connector NG 12, Pipe connector 9 x 1,5 0307 000 180
2 Straight connector NG 12, Pipe connector 12 x 1,5 0307 000 200
1 Straight connector NG 12, Pipe connector 16 x 2 0307 000 060
1 Tee plug connector NG 12, Pipe connector 12 x 1,5 0307 001 960
1 Angled plug NG 8, 90°, Pipe connector 6 x 1 0307 000 070
2 Angled plug NG 8, 90°, Pipe connector 8 x 1 0307 000 340
2 Angled plug NG 12, 90°, Pipe connector 8 x 1 0307 000 220
2 Angled plug NG 12, 90°, Pipe connector 12 x 1,5 0307 000 230
6 Gasket set, for connectors NG 8 9460 002 310
6 Gasket set, for connectors NG 12 9460 002 311
4 Union bolt NG 8, M16 x 1.5 0307 000 030
4 Union bolt NG 12, M22 x 1.5 0307 000 160
1 Threaded compression adapter NG 8, M16 x 1.5 3800 022 601
1 Straight screw-in coupling NG 12, M16 x 1.5 0307 000 300
1 Straight screw-in coupling NG 12, M22 x 1.5 0307 000 240
1 Sealing plug NG 8 0307 001 990
1 Sealing plug NG 12 0307 001 980

80
Pneumatic system 1
Assortment case

TGX, TGS, TGA


for VOSS connector system 232, complete
Version Order number
381-piece 0307 000 145

Contents
Number Description Type Dimensions mm Order number
4 Straight coupling 232 NG 8, Pipe connector 8 x 1 0307 124 325
4 Straight coupling 232 NG 12, Pipe connector 12 x 1,5 0307 124 330
10 Adapter for units with step drilling 230 NG 6 0307 000 194
4 Straight screw-in coupling 232 NG 8, M16 x 1.5 0307 124 220
4 Straight screw-in coupling 232 NG 12, M16 x 1.5 0307 124 290
4 Straight screw-in coupling 232 NG 12, M22 x 1.5 0307 124 310
20 Union bolt 230 NG 6, M10 x 1 0307 003 300
6 Union bolt 230 NG 8, M16 x 1.5 0307 000 030
6 Union bolt 230 NG 12, M22 x 1.5 0307 000 160
12 Union bolt 232 NG 8, M16 x 1.5 0307 124 700
12 Union bolt 232 NG 12, M22 x 1.5 0307 124 695
10 Straight connector 230 NG 6, Pipe connector 6 x 1 0307 003 430
15 Straight connecting plug 232 NG 8, Pipe connector 8 x 1 0307 124 360
5 Straight connecting plug 232 NG 12, Pipe connector 8 x 1 0307 124 395
9 Straight connecting plug 232 NG 12, Pipe connector 12 x 1,5 0307 124 400
10 Sealing plug 232 NG 8 0307 124 755
3 Sealing plug 232 NG 12 0307 124 760
10 Straight quick-fit coupling 230 Pipe diameter 6 0307 003 060
4 Angled plug 230 NG 6, 90°, Pipe connector 6 x 1 0307 000 055
10 Angled plug 232 NG 8, 90°, Pipe connector 8 x 1 0307 124 945
6 Angled plug 232 NG 12, 90°, Pipe connector 8 x 1 0307 124 970
6 Angled plug 232 NG 12, 90°, Pipe connector 12 x 1,5 0307 124 975
2 Tee plug connector 232 NG 12, Pipe connector 12 x 1,5/8 x 1 0307 124 660
1 Tee plug connector 232 NG 12, Pipe connector 12 x 1,5/12 x 1,5 0307 124 680
30 O-ring, Mud ring 232 NG 8, 7.5 x 2 0307 239 961
30 O-ring, Mud ring 232 NG 12, 12 x 2 0307 449 961
30 O-ring, Sealing ring 232 NG 8, 7 x 1.5 5239 390 055
30 O-ring, Sealing ring 232 NG 12, 12 x 1.6 0307 089 971
30 O-ring, Mud ring 230 NG 6, 5.5 x 1.5 0307 159 972
30 O-ring, Sealing ring 230 NG 6, 3.5 x 1.5 0307 149 971
20 Spring element 230 NG 6, 6.5 0307 062 179
6 Spring element 230 NG 8, 9.7 0307 000 040
6 Spring element 230 NG 12, 15.2 0307 000 170
20 Clamp 230 NG 6, 7.4 0307 016 900
6 Clamp 230 NG 8, 11.6 0307 000 020
6 Clamp for 6 tube 230 NG 12, 17.6 0307 000 150

www.europart.net 81
1
Lighting and electrics
H7 main headlamp
TGX, TGS, TGA

suitable for TGX, TGS, TGA


Version with high beam and side light
Voltage 24 V

Installation side Application Order number


left for vehicles without headlight levelling 5231 016 419
right for vehicles without headlight levelling 5231 016 348
left for vehicles with headlight levelling 9500 449 110
right for vehicles with headlight levelling 9500 449 111

Service parts
Description Order number
Side light/indicator lens, left 5230 331 023
Side light/indicator lens, right 5230 331 024
Seal, left (on request) 5231 110 050
Seal, right (on request) 5231 110 051
Seal, left/right 5232 511 105
H7 halogen headlamp bulb, PX 26 d, 70 W 8900 001 030
Glass-base bulb, 24 V, 5 W 8900 040 130

H7 main headlamp
suitable for TGX, TGS
Version with high beam and side light
Installation location front
Voltage 24 V
Scope of supply
without rubber seal

Installation side Application Order number


left for vehicles without headlight levelling 5230 240 118
right for vehicles without headlight levelling 5230 240 117
right for vehicles with headlight levelling 5231 016 466
left for vehicles with headlight levelling 5231 016 467

Service parts
Description Order number
Side light/indicator lens, left 5230 331 023
Side light/indicator lens, right 5230 331 024
Seal, left (on request) 5231 110 050
Seal, right (on request) 5231 110 051
H7 halogen headlamp bulb, PX 26 d, 70 W 8900 001 030
Glass-base bulb, 24 V, 5 W 8900 040 130

Headlamp adjustment equipment available from EUROPART!

82
Lighting and electrics 1
H7 main headlamp

TGX, TGS, TGA


suitable for TGX, TGS
Version with indicator, high beam and side light
Voltage 24 V

Installation side Application Order number


left for vehicles without headlight levelling 5230 240 139
right for vehicles without headlight levelling 5230 240 138
left for vehicles with headlight range adjustment 9501 658 300
right for vehicles with headlight range adjustment 9501 658 301

Service parts
Description Order number
Lens, left 5230 331 027
Lens, right 5230 331 028
Bulb, 24 V, 21 W, yellow 9560 013 496
H7 halogen headlamp bulb, PX 26 d, 70 W 8900 001 030

H7 main headlamp
suitable for TGX, TGS
Version with indicator, high beam, side and LED daytime running lights
Voltage 24 V
Application range
for vehicles with headlight levelling

Installation side Order number


left (on request) 5230 240 144
right 5230 240 145

Service parts
Description Order number
Lens, left 5230 331 027
Lens, right 5230 331 028
Bulb, 24 V, 21 W, BAY 9 s 9501 244 540
Bulb, 24 V, 21 W, yellow 9560 013 496
H7 halogen headlamp bulb, PX 26 d, 70 W 8900 001 030

www.europart.net 83
1
Lighting and electrics
Spotlight
TGX, TGS, TGA

suitable for TGX, TGS


Version with front foglamp
Width 405 mm
Height 140 mm
Depth 222 mm
Bulb type H4/H3
Voltage 24 V
Type flush-mounted
Installation side Order number
left 9501 660 024
right 9501 660 025

Service parts
Installation side Order number
Lens, left 5230 331 140
Lens, right 5230 331 141
H3 halogen headlamp bulb, PK 22 s, 70 W 8900 009 000
H4 halogen headlamp bulb, P 43 t, 75/70 W 8900 006 000

Additional headlamp
with indicator lights
suitable for TGX, TGS, TGA
Version with high beam and fog lamp
Installation location front
Width 395 mm
Height 95 mm
Depth 175 mm
Bulb type H4/P21W
Voltage 24 V
Type flush-mounting
Colour yellow
Installation side Order number
left 9190 222 791
right 9190 222 792

Service parts
Description Order number
H4 halogen headlamp bulb, P 43 t, 75/70 W 8900 006 000
H7 halogen headlamp bulb, PX 26 d, 70 W 8900 001 030
Bulb, Drop-shaped, 24 V, 21 W 8900 003 000
Bulb, 24 V, 21 W, yellow 9560 013 496

84
Lighting and electrics 1
Additional headlamp

TGX, TGS, TGA


with indicator lights
suitable for TGX, TGS, TGA
Version with high beam and fog lamp
Installation location front
Width 395 mm
Height 95 mm
Depth 175 mm
Voltage 24 V
Type flush-mounting
Colour white
Application range
for truck with steel bumper
Installation side Order number
left 5233 206 113
right 5233 206 114

Service parts
Description Order number
H4 halogen headlamp bulb, P 43 t, 75/70 W 8900 006 000
H7 halogen headlamp bulb, PX 26 d, 70 W 8900 001 030
Bulb, Drop-shaped, 24 V, 21 W 8900 003 000
Bulb, 24 V, 21 W, yellow 9560 013 496

Indicator light
suitable for TGX, TGS, TGA
Version without high beam and fog light, with trim
Installation location front
Width 395 mm
Height 95 mm
Depth 175 mm
Bulb type P21W
Voltage 24 V
Type flush-mounting
Colour yellow
Installation side Order number
left 5233 206 089
right 5233 206 090

Service parts
Description Order number
H4 halogen headlamp bulb, P 43 t, 75/70 W 8900 006 000
H7 halogen headlamp bulb, PX 26 d, 70 W 8900 001 030
Bulb, Drop-shaped, 24 V, 21 W 8900 003 000
Bulb, 24 V, 21 W, yellow 9560 013 496

www.europart.net 85
1
Lighting and electrics
TGX, TGS, TGA

Indicator light
suitable for TGX, TGS, TGA
Version with flashing light and position lamp
Installation side left/right
Type surface mounting
Colour yellow
Fastening 2 x M5
Order number
0001 259 061

Service parts
Description Order number
Lens, left/right 0088 538 001
Bulb, 24 V, 18 W 0002 091 241
Bulb, 24 V, 3 W, SV 6 0002 094 241

Indicator light
suitable for TGX, TGS, TGA
Installation location front, bottom
Installation side left/right
External diameter 122.5 mm
Depth 52,5 mm
Voltage 24 V
Colour white
Order number
5233 206 106

Service parts
Description Order number
Bulb, 24 V, 21 W, yellow 9560 013 496

Indicator light
suitable for TGX, TGS, TGA
Installation location at the side
Installation side left/right
External diameter 75 mm
Depth 52,5 mm
Bulb type PY21W
Voltage 24 V
Colour yellow
Order number
1325 331 052

Service parts
Description Order number
Bulb, 24 V, 21 W 8900 003 000

86
Lighting and electrics 1
LED side marker light

TGX, TGS, TGA


suitable for TGX, TGS, TGA
Version with reflector
Installation side left/right
Width 60 mm
Height 60 mm
Depth 25 mm
Voltage 24 V
Fastening 2-hole, 6 mm
Cable length 1250 mm
Scope of supply
with cable
approved for vehicles in accordance with GGVS/ADR
Order number
5233 311 120

Service parts
Description Order number
Spring nut 5238 200 340

LED side marker light


suitable for TGX, TGS, TGA
Version with reflector
Installation side left/right
Width 65 mm
Height 65 mm
Depth 29,5 mm
Voltage 12/24 V
Cable length 1500 mm
Connection connector, 2-pin
Scope of supply
with cable
Order number
1325 331 110

Service parts
Description Order number
Lens, left/right 9199 818 790
Glass-base bulb, 24 V, 5 W 8900 040 130
Spring nut 5238 200 340

www.europart.net 87
1
Lighting and electrics
TGX, TGS, TGA

LED side marker light


suitable for TGX, TGS, TGA
Version with reflector
Installation side left/right
Width 65 mm
Height 65 mm
Depth 30 mm
Voltage 24 V
Fastening with clip, 2 pins ∅ 5 mm
Cable grommet rubber bush
Order number
8840 187 001

Service parts
Description Order number
Lens, left/right 8840 187 101
Module, left/right 8850 102 000

Side marker light


suitable for TGX, TGS, TGA
Version with reflector
Installation side left/right
Width 65 mm
Height 65 mm
Depth 29 mm
Voltage 12/24 V
Fastening 2 x 6 mm
Cable length 1500 mm
Connection Bush, 2-pin
Order number
8840 203 098

Service parts
Description Order number
Lens, left/right 9199 818 790
Glass-base bulb, 24 V, 5 W 8900 040 130
Spring nut 5238 200 340

88
Lighting and electrics 1
Clearance light

TGX, TGS, TGA


suitable for TGX, TGS, TGA
Version with side marker, clearance, end-outline marker lamps and
reflector
Installation side left/right
Width 125 mm
Voltage 12/24 V

Fastening Height mm Order number


2 x M5, spacing 30 mm 30 9199 820 425
with bracket 40 9500 992 966

Service parts
Description Order number
Bulb, 24 V, 5 W 8900 040 130

LED position light


suitable for TGX
Installation location front, top
Installation side left/right
Width 108 mm
Height 33 mm
Depth 25 mm
Voltage 24 V
Colour clear
Order number
(on request) 1325 066 121

Service parts
Description Order number
Attachment frame for sheet metal roof 5230 450 147
Attachment frame for high roof 5232 450 148
Attachment frame with hole 5232 450 161

Position light
suitable for TGS
Installation location front, top
Installation side left/right
Width 108 mm
Height 33 mm
Depth 25 mm
Voltage 24 V
Colour clear
Order number
1325 006 099

Service parts
Description Order number
Attachment frame for sheet metal roof (on request) 5230 450 147
Attachment frame for high roof (on request) 5232 450 148
Attachment frame with hole (on request) 5232 450 161
Glass-base bulb, 24 V, 5 W 8900 040 130

www.europart.net 89
1
Lighting and electrics
Rear light
TGX, TGS, TGA

with external side marker light


suitable for TGX, TGS, TGA
Version with indicator, stop, rear fog, reversing, side marker, tail and clearance
light, reflector on side
Width 340 mm
Height 130 mm
Depth 86 mm
Bulb type P21W, R5W, W5W/24W
Voltage 24 V
Fastening 2 x M8, bolt spacing 152 mm
with connection plug at bottom
approved for vehicles in accordance with GGVS/ADR
Installation side Version Order number
left with licence plate light 9194 651 209
right without licence plate light 9194 651 108

Service parts
Description Order number
Lens, left/right 8840 203 126
Clearance light, 12/24 V 9199 820 425
Bulb, Drop-shaped, 24 V, 21 W 8900 003 000
Bulb, spherical, 24 V, 5 W 8900 001 000
Glass-base bulb, 24 V, 5 W 8900 040 130
Repair kit for connector 8840 203 024

Rear light
suitable for TGX, TGS, TGA
Width 400 mm
Height 160 mm
Depth 88.5 mm
Bulb type P21W/PY21W/R5W
Voltage 24 V
Fastening 2 x M8, bolt spacing 152 mm
with side connection plug AMP 1.5
approved for vehicles in accordance with GGVS/ADR
Installation side Version Order number
left indicator, stop, clearance, licence plate, rear fog, tail, reversing and side marker 6211 562 000
light, with reflector
right with indicator, stop, clearance, rear fog, tail, reversing and side marker light, 6211 562 100
reflector
right with indicator, stop, rebound, rear fog, reversing, side marker and tail light, 6211 562 200
with reflector on side, with reversing alarm

Service parts
Installation side Order number
Lens, left 6210 565 000
Lens, right 6210 565 100
Repair kit for rear lights 8850 071 100
Bulb, Drop-shaped, 24 V, 21 W 8900 003 000
Bulb, spherical, 24 V, 5 W 8900 001 000
Bulb, 24 V, 21 W, yellow 9560 013 496

90
Lighting and electrics 1

TGX, TGS, TGA


Rear light
suitable for TGX, TGS, TGA
Width 464 mm
Height 130 mm
Depth 83 mm
Socket BA 15 s
Bulb type P21W, R5W
Voltage 24 V
Fastening 2 x M8, bolt spacing 152 mm
Connection bayonet
Scope of supply
with bulb holder
approved for vehicles in accordance with GGVS/ADR
Installation side Version Order number
left with indicator, stop, tail, rear fog, reversing, clearance, side marker and licence 8840 207 313
plate light, with reflector
left/right with indicator, stop, tail, rear fog, reversing, clearance and side marker light, 8840 207 312
with reflector

Service parts
Description Order number
Lens, left/right 6210 675 000
Lens for side marker light 6210 672 070
Bulb, Drop-shaped, 24 V, 21 W 8900 003 000
Bulb, spherical, 24 V, 5 W 8900 001 000
Repair kit for connector 8840 203 024

Numberplate lamp
suitable for TGX, TGS, TGA
Installation side left/right
Width 102 mm
Height 55 mm
Depth 57 mm
Bulb type BA 15 s
Voltage 24 V
Housing colour black
Type Mounting/PG fitting
Scope of supply
with bulb holder
Order number
0003 389 081

Service parts
Description Order number
Housing, left/right 0121 587 031
Bulb, spherical, 24 V, 10 W, BA 15 s 8900 002 000

www.europart.net 91
1
Lighting and electrics
TGX, TGS, TGA

LED daytime running lamp


5 LEDs per light
Version With position light, daytime running light
Width 216 mm
Height 35.9 mm
Voltage 24 V
Test mark E1 2578
Type flush-mounting
Colour clear
Installation side Order number
left 0010 043 031
right 0010 043 041

LED daytime running lights set


Three high-power LEDs per light ensure the vehicle is seen easily during daylight
hours, too, and contribute towards significantly improving road safety, minimum power
consumption thanks to the latest LED technology, light is automatically activated when
the engine is started up, the electronics and relay switching are integrated in the
daytime running light
Installation side left/right
Voltage 9-33 V
Width 169.3 mm
Height 52.3 mm
Depth 63,8 mm
Test mark E1 2344
Colour clear
Scope of supply
2 LED daytime running lights, connection cable set and installation instructions
Order number
0009 496 801

Indicator switch
suitable for TGX, TGS, TGA
Version for wipers, washers, light, indicators and horn
Installation side left
Connection Harness
Cable length 260 mm
Voltage 24 V
Order number
9790 000 033

92
Lighting and electrics 1
Indicator switch

TGX, TGS, TGA


suitable for TGA
Version for wipers, washing, indicators and light
Installation side left
Connection Harness
Cable length 600 mm
Voltage 24 V
Order number
9790 003 943

Electric motor
for window regulator
suitable for TGA
Order number
5236 016 130

Starter Motor
suitable for TGA
Fastening 15°, left
Flange 3-hole
Voltage 24 V
Power kW Pinion teeth Order number
5.4 9 7063 002 380
6.6 9 7063 002 391
4 10 7563 002 317
This figure corresponds to 7063 002 391 4 11 7563 002 318

Starter Motor
as replacement
suitable for TGX, TGS, TGA
Version 40°, left
Pinion teeth 12
Flange 3-hole
Voltage 24 V
Order number
5230 223 465

www.europart.net 93
1
Lighting and electrics
TGX, TGS, TGA

Alternator
suitable for TGX, TGS, TGA
Voltage 28 V
Charging current 110 A
Version without belt pulley
Order number
7063 000 014

Alternator
suitable for TGA
Voltage 28 V
Charging current 55 A
Order number
3698 604 258

Alternator
suitable for TGA
Voltage 28 V
Charging current 100 A
Order number
3698 604 259

Alternator
suitable for TGA
Voltage 24 V
Charging current 140 A
Flange 2-hole
Order number
1902 533 300

94
Lighting and electrics 1
Generator regulator

TGX, TGS, TGA


suitable for TGA
Voltage 28 V
Charge voltage 28,5 V
Order number
3600 311 558

Compressor cooling unit


for retrofitting to the extendable storage box
fully hermetic Danfoss BD35F compressor with integrated control electronics,
undervoltage protection can be set for consumer or starter battery, electronic fuse,
automatic protection against polarity inversion, dynamically ventilated wire pipe
condenser, aluminium conveyer evaporator, infinitely variable thermostat
suitable for TGX, TGS, TGA
Power consumption 35 W
Voltage 12/24 Volt DC
Order number
9710 004 712

Professional
vehicle diagnosis
Across-brand diagnostic tools for tractor
vehicles, trailers, semi-trailers, buses
and vans

www.europart.net

www.europart.net 95
1
Bodywork
Front flap
TGX, TGS, TGA

suitable for TGX


Driver cab XL/XLX/XXL
Order number
9191 106 041

Accessories
Description Order number
Front grille wide, with decorative strip (on request) 5230 293 765
Decorative strip, chrome-plated (on request) 5231 500 124

Front flap
suitable for TGS
Driver cab L/LX
Order number
9191 106 042

Accessories
Description Order number
Front grille narrow, with decorative strip (on request) 5230 293 763
Decorative strip, chrome-plated (on request) 5231 500 125

Front flap
suitable for TGA
Driver cab XL/XLX/XXL
Order number
9090 700 047

Accessories
Description Order number
Front grille 5231 506 050

Front flap
suitable for TGA
Driver cab M/L/LX
Order number
9191 100 063

Accessories
Description Order number
Front grille 5828 880 051

96
Bodywork 1
Front trim

TGX, TGS, TGA


for cab pivot bearing
suitable for TGS, TGA
Version grained
Installation location front, centre
Colour grey
Order number
5230 280 788

7 6

3 2

5 8 4

Bumper
suitable for TGX
Driver cab XL/XLX/XXL
Material Plastic
Illustration Colour Version Order number
- white, primed - 9196 100 364
- white, primed with device for Adaptive Cruise Control (ACC) 1325 080 017
1 grey - 5230 279 928

Accessories
Illustration Description Installation location Order number
2 Bumper corner left 9190 710 191
3 Bumper corner right 9190 710 192
4 Bumper trim left 5230 280 812
5 Bumper trim right 5230 280 811
- Cover left (on request) 1325 080 112
- Cover right (on request) 1325 080 113
6 Cover trim left 9190 100 369
7 Cover trim right 9190 100 370
8 Step-up centre 5230 280 248
9 Step-up bottom 5230 280 247
- Pressure ring 5230 280 818

www.europart.net 97
1
Bodywork
TGX, TGS, TGA

5 4

3 2

Bumper
suitable for TGS
Driver cab L/LX
Material Plastic

Illustration Colour Surface Order number


- white primed 5230 279 927
1 grey painted 9190 100 361

Accessories
Illustration Description Installation location Order number
2 Bumper corner left 9196 140 023
3 Bumper corner right 9196 140 024
4 Cover trim left 9190 100 367
5 Cover trim right 9190 100 368
6 Step-up centre 5230 280 248
7 Step-up bottom 5230 280 247
- Pressure ring 5230 280 818

98
Bodywork 1

TGX, TGS, TGA


1

7 6

3 2

Bumper
suitable for TGA
Driver cab M/L/LX
Material Plastic
Illustration Colour Surface Order number
- white primed 9190 003 011
1 grey painted 9190 003 010

Accessories
Illustration Description Installation location Order number
2 Bumper corner left 9190 000 312
3 Bumper corner right 9190 000 311
- Cover, left/right front, inside 9190 850 031
- Cover, left/right front, outside 9190 850 040
4 Step-up front, below, centre 5230 279 967
5 Step-up bottom 5230 279 969
6 Cover trim left 5230 279 903
7 Cover trim right 5236 100 230

www.europart.net 99
1
Bodywork
TGX, TGS, TGA

5 4

3 2

Bumper
suitable for TGA
Driver cab XL/XLX/XXL
Material Plastic
Illustration Colour Surface Order number
- white primed 9190 700 198
1 grey textured paint 9190 000 300

Accessories
Illustration Description Installation location Order number
2 Bumper corner left 9190 700 210
3 Bumper corner right 9190 700 212
4 Cover trim left 5236 100 231
5 Cover trim right 5236 100 232
- Cover for bumper mounting left/right 5236 850 029
- Cover, front, inside left/right 9190 850 031
- Cover, front, outside left/right 9190 850 040
6 Step-up, short front, below, centre 5230 279 967
7 Step-up, long front, bottom 5230 279 968

100
Bodywork 1
Entry box

TGX, TGS, TGA


with wing
suitable for TGS, TGA
Driver cab M/L/LX
Installation location front
Colour grey
Installation side Order number
left 5235 100 473
right 5230 295 059

Entry box
with wing
suitable for TGS, TGA
Driver cab M/L/LX
Installation location front
Colour grey
Installation side Order number
left 5230 295 094
right 5230 295 093

Entry box
with wing
suitable for TGS, TGA
Driver cab M/L/LX
Installation location front
Colour grey
Installation side Order number
left 5230 295 064
right 5230 295 063

Entry box
with wing
suitable for TGS, TGA
Driver cab M/L/LX
Installation location front
Colour white, primed
Installation side Order number
left 9190 100 761
right 9190 100 762

www.europart.net 101
1
Bodywork
Entry box
TGX, TGS, TGA

with wing
suitable for TGX, TGA
Driver cab XL/XLX/XXL
Driver cab width 2440 mm
Installation location front
Colour grey, painted
Installation side Order number
left 9090 700 230
right 9090 700 233

Entry box
with wing
suitable for TGX, TGA
Driver cab XL/XLX/XXL
Installation location front
Colour white, primed
Installation side Order number
left 9090 700 231
right 9090 700 234

Entry box
with wing
suitable for TGX, TGA
Driver cab XLX/XXL
Installation location front
Colour white, primed
Installation side Order number
left 9190 100 831
right 9190 100 830

Entry box
suitable for TGS, TGA
Driver cab M/L/LX
Installation location front, bottom
Colour grey

Installation side Version Order number


left without cutout for maintenance hatch 9090 700 351
right with cutout for maintenance hatch 9090 700 350

102
Bodywork 1
Entry box

TGX, TGS, TGA


suitable for TGX, TGA
Driver cab XL/XLX/XXL
Installation location bottom
Colour grey

Installation side Version Order number


left without cutout for maintenance hatch 9090 700 214
right with cutout for maintenance hatch 9090 700 217

Entry box
suitable for TGX, TGA
Driver cab XL/XXL
Installation location bottom
Colour white, primed

Installation side Version Order number


left without cutout for maintenance hatch 9090 700 215
right with cutout for maintenance hatch 9090 700 218

Entry box
suitable for TGA, TGS
Driver cab M/L/LX
Installation location front, bottom
Colour grey

Installation side Version Order number


left without cutout for maintenance hatch 9090 700 355
right with cutout for maintenance hatch 9090 700 382

Maintenance flap
for entry step
suitable for TGX, TGS, TGA
Installation location front
Installation side left/right
Colour grey
Order number
5230 295 067

www.europart.net 103
1
Bodywork
TGX, TGS, TGA

1 2 3

Step-up
for entry step
suitable for TGX, TGA
Driver cab XL/XLX/XXL
Installation side left/right
Illustration Installation location Order number
1 top 9190 700 236
2 centre 5235 110 001
3 bottom 9190 105 187

Step-up
for entry step
suitable for TGS, TGA
Driver cab L/LX
Installation location top
Installation side left/right
Order number
9190 100 490

Wing extension
suitable for TGS, TGA
Driver cab L/LX
Installation location front
Colour grey
Installation side Order number
left 5230 295 017
right 5230 295 016

Wing extension
suitable for TGS, TGA
Driver cab L/LX
Installation location front
Colour grey
Installation side Order number
left 5230 295 072
right 5230 295 040

104
Bodywork 1
Wing extension

TGX, TGS, TGA


suitable for TGS, TGA
Driver cab L/LX
Installation location front
Colour grey
Installation side Order number
left 5230 295 037
right 5230 295 038

Wing extension
suitable for TGS, TGA
Driver cab L/LX
Installation location front
Colour grey
Installation side Order number
left 9195 100 552
right 9195 100 288

Wing extension
suitable for TGX, TGA
Driver cab XL/XLX/XXL
Installation location front
Colour grey
Driver cab width 2440 mm
Installation side Order number
left 9190 700 409
right 9190 700 408

Wing extension
suitable for TGX, TGA
Driver cab XL/XLX/XXL
Installation location front
Colour white, primed
Installation side Order number
left 5230 295 052
right 5230 295 051

Door extension
suitable for TGX, TGA
Driver cab XL/XLX/XXL
Colour grey
Installation side Order number
left 9196 100 019
right 9196 100 018

www.europart.net 105
1
Bodywork
Door extension
TGX, TGS, TGA

suitable for TGX, TGA


Driver cab XL/XLX/XXL
Colour white, primed
Installation side Order number
left 5236 100 023
right 5230 300 025

Wing cover
suitable for TGX, TGA
Installation location at the side, behind cab
Colour grey
Installation side Order number
left 5826 641 307
right 5826 641 306

Wing cover
suitable for TGX, TGA
Installation location at the side, behind cab
Version white, primed
Installation side Order number
left 5230 304 080
right 5230 304 079

Wing extension
suitable for TGS, TGA
Driver cab L/LX
Installation location front
Installation side Order number
left (on request) 5230 293 889
right (on request) 5230 293 888

106
Bodywork 1
Wing extension

TGX, TGS, TGA


suitable for TGS, TGA
Installation location rear
Installation side Order number
left (on request) 5230 293 891
right (on request) 5230 293 890

Wind deflector
suitable for TGX, TGS
Driver cab M/L/LX, XL/XLX/XXL
Installation location outside
Colour white
Installation side Order number
left 9190 100 067
right 5230 803 080

Wind deflector
suitable for TGA
Driver cab M/L/LX, XL/XLX/XXL
Installation location outside
Colour white, primed
Installation side Order number
left 9190 100 089
right 9190 100 090

Wind deflector
suitable for TGA
Driver cab XL/XLX/XXL
Installation location outside
Colour white, primed
Installation side Order number
left 9199 700 049
right 9199 700 048

www.europart.net 107
1
Bodywork
Air deflector
TGX, TGS, TGA

suitable for TGX, TGS


Driver cab M/L/LX, XL/XLX/XXL
Installation location inside
Colour grey
Installation side Order number
left 9190 106 049
right 9190 106 048

Air deflector
suitable for TGA
Driver cab XL/XLX/XXL
Installation location inside
Colour white, primed
Installation side Order number
left 5230 299 437
right 5230 299 436

Pan
for deflector
suitable for TGX, TGS, TGA
Installation side Order number
left 5234 400 049
right 5230 299 730

Door handle
with key
suitable for TGS, TGA
Driver cab L/LX, XL/XLX/XXL
Installation side left
Order number
5230 300 336

108
Bodywork 1
Wing

TGX, TGS, TGA


suitable for TGS, TGA
Version small wheel cutout
Installation location front axle, rear
Colour grey
Installation side Order number
left 5234 100 361
right 5230 304 102

Wing
suitable for TGS, TGA
Driver cab L/LX
Version large wheel cutout
Installation location front axle, rear
Colour grey
Installation side Order number
left 9194 100 362
right 9194 100 363

Wing
suitable for TGX, TGA
Driver cab XL/XXL
Installation location Front axle, inner
Application range
for vehicles with air suspension
Installation side Order number
left (on request) 5232 300 276
right (on request) 5230 294 199

Wing
suitable for TGX, TGA
Driver cab XL/XLX/XXL
Installation location front axle, rear
Installation side left/right
Order number
5230 293 934

www.europart.net 109
1
Bodywork
TGX, TGS, TGA

1 2 3

Wing
suitable for TGX, TGS, TGA
Installation location rear axle
Width 680 mm
Illustration Installation side Order number
1 left, front section 9190 100 293
1 right, front section 9190 100 294
2 left/right, centre section 9190 706 086
3 left, rear 6170 380 210
3 right, rear 9190 100 172

Accessories
Description Order number
Tightening strap rubber, 1. series, left/right 9090 700 001

1 2

Wing
suitable for TGX, TGS, TGA
Installation location rear axle
Installation side left/right
Width 690 mm
Illustration Version Order number
1 front part, partially also rear part, then with spray suppressor 9190 106 599
- central piece, Length 850 mm, Height 117 mm, Clamping width 935 mm 9190 106 607
2 centre section, Length 920 mm, Height 185 mm, Clamping width 1000 mm 5234 106 606
1 rear section 9194 106 625

Accessories
Description Order number
Tightening strap rubber, left/right 9090 700 002

110
Bodywork 1

TGX, TGS, TGA


1 2

Wing
suitable for TGX, TGS, TGA
Installation location rear axle
Width 690 mm
Illustration Installation side Order number
1 left, front section 9190 106 626
1 right, front section 9190 106 631
2 left/right, centre section 5234 106 606

Accessories
Description Order number
Tightening strap rubber, left/right 9090 700 002

1 2

Wing
suitable for TGX, TGS, TGA
Installation location rear axle
Installation side left/right
Width 520 mm
Illustration Version Order number
1 front part, partially also rear part with spray suppressor 9190 106 608
2 central piece 9190 106 612

Accessories
Description Order number
Tightening strap rubber, left/right 9090 700 002

www.europart.net 111
1
Bodywork
Aero package
TGX, TGS, TGA

for driver's cab


suitable for TGS, TGA
Driver cab LX
Version 550-800 mm height adjustable
Fastening original thread points in cab roof
Colour pure white
Scope of supply
Mounting material
Application range
Semitrailer tractor
Order number
1923 100 223

Aero package
for driver's cab
suitable for TGS, TGA
Driver cab LX
Version 550-800 mm height adjustable
Fastening original thread points in cab roof
Colour pure white
Scope of supply
Mounting material
Application range
tractor vehicle, SV 60 mm deep
Order number
9192 310 213

Aero package
for driver's cab
suitable for TGX, TGA
Driver cab XL
Version 550-800 mm height adjustable
Fastening original thread points in cab roof
Colour pure white
Scope of supply
Mounting material
Order number
9192 310 212

112
Bodywork 1
Aero package

TGX, TGS, TGA


for driver's cab
suitable for TGX, TGA
Driver cab XXL
Version 150-300 mm height adjustable
Fastening original thread points in cab roof
Colour pure white
Scope of supply
Mounting material
Order number
9192 310 211

Roof spoiler
for driver's cab
suitable for TGS, TGA
Driver cab LX
Version 550-800 mm height adjustable
Fastening original thread points in cab roof
Colour pure white
Scope of supply
Mounting material
Order number
9192 300 203

Roof spoiler
for driver's cab
suitable for TGX, TGA
Driver cab XL
Version 550-800 mm height adjustable
Fastening original thread points in cab roof
Colour pure white
Scope of supply
Mounting material
Order number
9192 300 202

www.europart.net 113
1
Bodywork
Roof spoiler
TGX, TGS, TGA

for driver's cab


suitable for TGS, TGA
Driver cab M
Version 550-800 mm height adjustable
Fastening original thread points in cab roof
Colour pure white
Scope of supply
Mounting material
Order number
9192 300 205

Roof spoiler
for driver's cab
suitable for TGS, TGA
Driver cab L
Version 550-800 mm height adjustable
Fastening original thread points in cab roof
Colour pure white
Scope of supply
Mounting material
Order number
9192 300 204

Roof spoiler
for driver's cab
suitable for TGX, TGA
Driver cab XXL
Version 150-300 mm height adjustable
Fastening original thread points in cab roof
Colour pure white
Scope of supply
Mounting material
Order number
9192 300 201

114
1
Driver's cab
Windscreen
TGX, TGS, TGA

for driver's cab


suitable for TGA

Driver cab Version Height mm Width mm Order number


M/L/LX clear 880 2052 9115 799 450
M/L/LX green, heated 880 2052 9115 799 456
XXL clear, with band filter, heatable 1133 2253 9115 799 477

Windscreen
Version without gusset
Colour green
Height 880 mm

suitable for Driver cab Width mm Order number


TGS, TGA M/L/LX 2052 9115 799 453
TGX, TGA XL/XLX 2251 9115 799 462

Accessories
Description Order number
Cover (on request) 5230 301 505

Windscreen
suitable for TGA
Driver cab XXL
Version with band filter
Colour green
Width 2253 mm
Height 1133 mm
Order number
9115 799 474

Accessories
Description Order number
Cover (on request) 5230 301 504

116
Driver's cab 1
Sunshade

TGX, TGS, TGA


suitable for TGA
Driver cab XXL
Version for high roof
Driver cab width 2440 mm
Scope of supply
complete
Order number
9192 045 005

Sunshade
suitable for TGA
Driver cab M/L/LX
Version for flat roof
Driver cab width 2240 mm
Scope of supply
complete
Order number
9192 045 008

1 2 3

Sunshade
Driver cab XL, M/L
Version for flat roof
Scope of supply
complete
Illustration suitable for Driver cab width mm Model year Order number
1 TGS, TGA 2240 04/2004- 9190 430 220
2 TGX, TGA 2440 04/2004- 9190 430 210
3 TGA 2440 -04/2004 9192 045 006

Side window wind deflector


made of smoke-coloured plexiglass, no draught, less window soiling
Version screw attachment
suitable for Note Order number
TGA 9192 046 040
TGX, TGS 9190 460 800
TGX, TGS with cutout for ramp mirror 9190 460 940

www.europart.net 117
1
Driver's cab
TGX, TGS, TGA

Wiper blade
suitable for TGX, TGS, TGA
Version with 4 adapters
Length 700 mm
Order number
7257 002 110

Wiper blade
suitable for TGX, TGS, TGA
Version with nozzle
Length 700 mm
Order number
3600 004 080

Washer fluid pump


suitable for TGX, TGS, TGA
Version dual outlet pump, electric
Voltage 24 V
Order number
5234 856 032

Wiper motor
suitable for TGX, TGS, TGA
Version interference suppressed
Voltage 24 V
Order number
5234 016 140

(Illustration similar)

Wiper rods
suitable for TGS, TGA
Order number
5828 820 111

118
Driver's cab 1

TGX, TGS, TGA


Main mirror
suitable for TGA
Curve radius 1800 mm
Scope of supply
with cover

Installation side Version Dimensions mm Order number


left heated, electric adjustment 399 x 207 x 137 9113 921 222
right heated, electric adjustment 399 x 222 x 138 9113 922 222
right heated, electric adjustment, Memory Function 399 x 222 x 138 9113 922 232

Service parts
Description Installation side Order number
Glass unit left 9113 921 870
Glass unit right 9113 922 870
Cover left 9113 921 110
Cover right 9113 921 120

Accessories
Description Order number
Clamping piece, for vehicles up to 11/06 year of manufacture 9113 920 300
Screw, Diameter 6 mm 9110 603 004

Main mirror
suitable for TGA
Version heated, electric adjustment
Curve radius 1200 mm
Scope of supply
with cover

mirror complies with ordinance 2003/97/EU or 2007/38/EU


Installation side Dimensions mm Design Order number
left 399 x 207 x 137 a 9113 921 224
right 399 x 222 x 138 a 9113 922 224
left 399 x 207 x 137 b 9113 921 223
right 399 x 222 x 138 b 9113 922 223

Service parts
Description Installation side Order number
Glass unit left/right 9113 920 840
Cover left 9113 921 110
Cover right 9113 921 120
Accessories
Description Order number
Clamping piece, for vehicles up to 11/06 year of manufacture 9113 920 300
Clamping piece, for vehicles from 12/06 year of manufacture 9113 921 300
Screw, Diameter 6 mm 9110 603 004

www.europart.net 119
1
Driver's cab
TGX, TGS, TGA

Main mirror
suitable for TGA
Version heated, electric adjustment, Memory Function
Curve radius 1200 mm
Scope of supply
with cover

mirror complies with ordinance 2003/97/EU or 2007/38/EU


Installation side Dimensions mm Order number
right 399 x 222 x 138 9113 922 233

Service parts
Description Installation side Order number
Glass unit left/right 9113 920 840
Cover left 9113 921 110
Cover right 9113 921 120

Accessories
Description Order number
Clamping piece 9113 920 300
Screw, Diameter 6 mm 9110 603 004

Main mirror
suitable for TGA
Length 426 mm
Width 200 mm
Depth 135 mm
Curve radius 1200 mm

mirror complies with ordinance 2003/97/EU or 2007/38/EU


Installation side Version Order number
left/right heated, manual adjustment 9115 720 140
left heated, electric adjustment 9110 721 160
right heated, electric adjustment 9115 722 160

Service parts
Description Installation side Order number
Mirror glass left/right 9115 725 412

120
Driver's cab 1

TGX, TGS, TGA


Complete mirror system
Length 943 mm
Depth 153 mm

suitable for Version Installation side Width mm Order number


TGX II/IV electric adjustment left 382 9115 800 102
TGX II/IV electric adjustment right 382 9115 800 202
TGX II electric, IV manual adjustment left 382 9115 800 101
TGX II electric, IV manual adjustment right 382 9115 800 201
TGX II/IV electric adjustment right, with memory function 382 9115 800 203
TGS II/IV electric adjustment left 437 9115 800 122
TGS II/IV electric adjustment right 437 9115 800 222
TGS II electric, IV manual adjustment left 437 9115 800 121
TGS II electric, IV manual adjustment right 437 9115 800 221
II = main mirror, IV = wide-angle mirror

Service parts
Description Installation side Order number
Glass unit for main mirror left/right 9115 801 840
Glass unit suitable for wide angle mirror left 9115 811 871
Glass unit suitable for wide angle mirror right 9115 811 872
Mirror head left/right 9115 800 100
Mounting bracket, outside mirror left 9118 580 020
Mounting bracket, outside mirror right 9118 580 021

Accessories
Description Installation side Order number
Cover for complete mirror system left/right 9111 580 010
Cover for jack stand left, top 9115 800 410
Cover for jack stand right, top 9115 800 420
Cover for jack stand left, bottom 9115 800 610
Cover for jack stand right, bottom 9115 800 620
Cover for hinge left 9115 800 710
Cover for hinge right 9115 800 720
Cover for bolt left/right 5230 302 745

Front mirror
with mirror holder
suitable for TGX, TGS
Order number
3002 430 887

www.europart.net 121
1
Driver's cab
TGX, TGS, TGA

Front mirror
suitable for TGA
Version manual adjustment
Installation width right
Application Left-hand drive
Length 520 mm
Width 259 mm
Depth 92 mm
Curve radius 240 mm
Scope of supply
with rod
mirror complies with ordinance 2003/97/EU or 2007/38/EU
Order number
9113 894 241

Service parts
Description Installation side Order number
Front mirror, without rod left/right 9113 894 140

Wide angle mirror


suitable for TGA
Curve radius 300 mm
Scope of supply
with cover

mirror complies with ordinance 2003/97/EU or 2007/38/EU


Installation side Design Version Dimensions mm Order number
left a heated, manual adjustment 188 x 207 x 129 9111 037 033
right a heated, manual adjustment 188 x 220 x 130 9113 932 343
left b heated, electric adjustment 188 x 207 x 129 9113 931 323
right b heated, electric adjustment 188 x 220 x 130 9113 932 323

Service parts
Description Installation side Order number
Glass unit left/right 9113 932 870
Cover left 9113 931 110
Cover right 9113 931 120

Accessories
Description Order number
Clamping piece, for vehicles up to 11/06 year of manufacture 9113 920 300
Clamping piece, for vehicles from 12/06 year of manufacture 9113 921 300
Screw, Diameter 6 mm 9110 603 004

122
Driver's cab 1

TGX, TGS, TGA


Ramp mirror
suitable for TGA
Installation side left/right
Length 303 mm
Width 163 mm
Depth 88 mm
Curve radius 300 mm

Version Order number


unheated, manual adjustment 9110 221 752
heated, electric adjustment, 24 V 9110 221 753

Service parts
Description Order number
Glass unit, heated 9111 570 099
Glass unit, unheated 9115 791 470

Ramp mirror
suitable for TGX, TGS
Version heated, electric adjustment
Installation side left/right
Length 303 mm
Width 163 mm
Depth 85 mm
Curve radius 300 mm
Order number
9110 221 754

Service parts
Description Order number
Glass unit, heated 9111 570 099

Heat exchanger
for interior heating
suitable for TGX, TGS, TGA
Length 370 mm
Width 190 mm
Height 43 mm
Order number
9100 269 002

www.europart.net 123
1
Driver's cab
Air-conditioning compressor
TGX, TGS, TGA

suitable for TGA


Pulley diameter 132 mm
Number of ribs 8
Voltage 24 V
Order number
9100 850 670

Air-conditioning compressor
suitable for TGX, TGS, TGA
Pulley diameter 119 mm
Number of ribs 8
Voltage 24 V
Order number
9108 506 710

Condenser
for air-conditioning systems
suitable for TGX, TGS, TGA
Length 740 mm
Width 350 mm
Depth 16 mm
Order number
0351 300 121

Filter dryer
for air-conditioning systems
suitable for TGX, TGS, TGA
Length 405 mm
Diameter 45 mm
Order number
0351 197 481

Filter dryer
for air-conditioning systems
suitable for TGX, TGS, TGA
Version with holder and dual thermostatic switch
Diameter 50 mm
Length 290 mm
Order number
9100 802 520

124
Driver's cab 1

TGX, TGS, TGA


Evaporator
for air-conditioning system
Version with expansion valve
suitable for Length x Width x Depth mm Order number
TGA 385 x 203 x 67 9100 820 221
TGX, TGS, TGA 307 x 200 x 65 (on request) 0351 336 111

Expansion valve
for air-conditioning system
suitable for TGA
Order number
0351 239 381

Blower
with integrated controller
suitable for TGX, TGS, TGA
Power 300 W
Voltage 24 V
Order number
0009 158 151

Coolant control valve


suitable for TGA
Voltage 24 V
Order number
9100 903 100

www.europart.net 125
1
Driver's cab
TGX, TGS, TGA

Cabin filter
suitable for TGX, TGS, TGA

(Illustration similar)

Version Order number Comparative number


Activated charcoal filter 9020 479 500 MANN CUK 4795
Pollen filter 9020 047 950 MANN CU 4795

Roof-mounted air-conditioning system for truck


CoolAir RT 880, for stationary operation
extraordinary cooling performance and additional air dehumidification, pleasant climate, independently of the external climatic
conditions, working while the engine is switched off, simple installation
Refrigerant R134a
Cooling capacity 1000 W (compressor capacity), 850 W (based on ISO 5151)
Dimensions of roof unit (W x H x D) 830 x 160 x 635 mm
Version Base model, 0° compressor tilt
Input voltage 24 V DC
Current consumption 12-22 A
Colour white
Scope of supply
remote control, connection cable, operating instructions
Order number
1880 000 044

Accessories
Description Order number
Assembly set, TGX XXL, TGS 1880 000 031
Assembly set universal, for vehicles with roof hatch, with screw fastening 1880 000 038
Protective hood CoolAir 1880 000 040

126
Driver's cab 1

TGX, TGS, TGA


Truck split air conditioning
CoolAir SP-950, for roof and rear panel mounting
high-quality design, roof unit only 58 mm high, can be switched in during the journey to support the existing factory-fitted air
conditioning system, the casings can be painted later
Refrigerant R134a
Cooling capacity 1000 Watts (compressor capacity), 850 Watts (following ISO 5151)
dimensions of condenser unit: 346 x 485 x 156 mm, weight approx. 16 kg
dimensions of evaporator unit: 778 x 58 x 577 mm, weight approx. 12 kg
Input voltage 24 V DC
Current consumption 12-22 A
Colour white
Scope of supply
condenser unit, roof evaporator unit, remote control, connection cable, mounting materials, installation and operating instructions
Order number
1880 100 029

Accessories
Description Order number
Assembly set universal, for vehicles with roof hatch, with screw fastening 1880 000 038
Assembly set TGX XLX, XXL, TGS 1880 000 045
Attachment frame TGX XL, TGS LX, L 1880 000 049
Attachment frame TGX XLX, XXL, TGS 1880 300 050

Booster heating
Airtronic D2
Type 2200 W
Voltage 24 V
Order number
9192 116 050

www.europart.net 127
1
Driver's cab
TGX, TGS, TGA

Truck driver's seat


6860/875 NTS
automatic weight adjustment with connection to the vehicle pneumatic system, with
pressure permanently at least 7.5 bar, built-in 3-point safety belt system, adjustable
upper belt diverter, height adjustment with memory function, seat back adjustment,
shoulder adjustment, lean and horizontal settings, adjustable vertical movement
damper, on/off horizontal springing, adjustable seat cushion depth, integrated
pneumatic system (IPS) for adjustment of backrest to individual body contour (lumbar
support and adjustable side support), rapid lowering, grey/anthracite seat covering with
fine silver coloured stripes
suitable for TGX, TGS, TGA
Suspension pneumatic
It is not permitted to use this item in vehicles with air bag systems, seat belt
pretensioners and belt lock sensors!
Arm rests must be ordered separately.
Version Order number
Standard, can be operated on the left 9368 970 501
Comfort, can be operated from the left, with seat climate control 9368 971 501
(Illustration similar) Accessories
Description Order number
Arm rest, left, Standard 9369 296 511
Arm rest, right, Standard 9369 296 521
Arm rest, left, Luxury with textile cover 9360 707 413
Arm rest, right, Luxury with textile cover 9360 707 313

Truck driver's seat


Kingman High Performance Standard, without belt pretensioner
air sprung, with external supply, spring deflection 70 mm, height adjustment 100 mm,
built-in headrest, length adjustment, longitudinal horizontal suspension, pneumatic
lumbar support, backrest setting, built-in 3-point restraint system, quick lowering, side
contour adjustment, seat angle adjustment, adjustable shock absorber
suitable for TGX, TGS, TGA
Version Standard
Illustration shows special equipment!
Order number
9361 503 120

Accessories
Description Order number
Arm rest, left 9361 029 136
Arm rest, right 9361 029 137

128
Der Fahrer ist der Star.
Locker bleiben.

Sitzen — auf höchstem Niveau. www.isri.de


1
Driver's cab
TGX, TGS, TGA

Truck driver's seat


Kingman High Performance Comfort
spring deflection 70 mm, height adjustment 100 mm, integrated head rest, length
adjustment, longitudinal horizontal suspension, pneumatic lumbar support, neck pillow
with exchangeable cover, backrest setting, integrated 3-point restraint system with
adjustable belt tongue, tapered back contour, quick lowering, side contour adjustment,
2-level seat heating, seat cushion depth setting, seat angle setting, adjustable shock
absorbers
suitable for TGX, TGS, TGA
Suspension pneumatic
For vehicles without an airbag!
Order number
9361 503 130

Accessories
Description Order number
Arm rest, left 9361 029 136
Arm rest, right 9361 029 137

(Illustration similar)

Seat covering
suitable for TGA
Installation side left
Colour antracite
Material velour/lambskin
Version Backrest with integrated headrest, with belt slot and Velcro™
fastening
Order number
9192 220 333

Seat covering
suitable for TGX, TGS, TGA
Colour antracite
Material Velour
Version with extended back section, belt slot and Velcro™ fastening
Installation side Order number
left 9193 031 071
right 9193 031 072

Seat covering
suitable for TGX, TGS, TGA
Colour black
Material Velours
Version with extended back section, belt slot and Velcro fastening
Installation side Order number
left 9190 772 045
right 9190 772 046

130
Driver's cab 1
Seat covering

TGX, TGS, TGA


Star-X, for bucket seats
suitable for TGA
Colour Order number
grey 9190 004 001
blue 9190 004 002
black 9190 004 003

This figure corresponds to 9190 004 002

Floor mat set


Material rubber
Colour black

suitable for Driver cab Version Order number


TGA M/L/LX 2-part, front, left/right, with cut-out 9190 140 060
TGA XL/XXL 2-part, front, left/right 9190 140 070
TGX 2-part, front, left/right 9190 014 019

Pedal pad
for brake and clutch pedal
suitable for TGX, TGS, TGA
Material rubber
Order number
9080 001 113

Filing table
with anti-slip mat
suitable for TGX
Version without cut-out
Installation side centre
Material poplar laminated wood
Colour black
Order number
1002 010 615

www.europart.net 131
1
Driver's cab
Filing table
TGX, TGS, TGA

with anti-slip mat


suitable for TGX
Version with cut-out
Installation side centre
Material poplar laminated wood
Colour black
Order number
1002 010 617

Filing table
with anti-slip mat
suitable for TGX
Version large, with cut-out
Installation side centre
Material poplar laminated wood
Colour black
Order number
1002 010 623

Filing table
with anti-slip mat
suitable for TGX
Version large, without cut-out
Installation side centre
Material poplar laminated wood
Colour black
Order number
1002 010 621

Filing table
with anti-slip mat
suitable for TGS
Version with cut-out
Installation side centre
Material poplar laminated wood
Colour black
Order number
1002 010 627

Filing table
with anti-slip mat
suitable for TGS
Version without cut-out
Installation side centre
Material poplar laminated wood
Colour black
Order number
1002 010 625

132
Driver's cab 1
Filing table

TGX, TGS, TGA


with anti-slip mat
suitable for TGA
Driver cab M/L/LX
Installation side centre
Material poplar laminated wood
Colour black
Order number
9199 210 601

Filing table
with anti-slip mat
suitable for TGA
Driver cab XL/XXL
Installation side centre
Material poplar laminated wood
Colour black
Order number
9080 084 719

Filing table
with anti-slip mat
suitable for TGA
Driver cab M/L/LX
Version with on-board unit cut-out
Installation side centre
Material poplar laminated wood
Colour black
Order number
9199 210 613

Filing table
with anti-slip mat
suitable for TGA
Driver cab XL/XXL
Version with on-board unit cut-out
Installation side centre
Material poplar laminated wood
Colour black
Order number
1002 010 607

Filing table
with anti-slip mat
suitable for TGA
Driver cab XL/XXL, M/L/LX
Installation side right
Material poplar laminated wood
Colour black
Order number
9080 084 807

www.europart.net 133
1
Driver's cab
TGX, TGS, TGA

Shock absorber
suitable for TGX, TGS, TGA
Version gas pressure, twin-tube system
Fastening eye/eye
Installation location driver's cab
Order number Comparative number
2300 135 200 Sachs 313 184
5237 226 053 Sachs 313 077
5237 226 055 Sachs 313 078

Shock absorber
Version gas pressure, twin-tube system
Fastening eye/eye
Installation location driver's cab
suitable for Order number Comparative number
TGA 9200 001 256 MAN 81.41722-6052
TGX, TGS, TGA 5234 172 260 MAN 81.41722.6075

This figure corresponds to 9200 001 256

Shock absorber
CALM II
suitable for TGX, TGS, TGA
Version gas pressure, twin-tube system
Fastening eye/eye
Installation location driver's cab
Order number Comparative number
0620 060 010 WABCO 964 006 019 0
3800 060 220 WABCO 964 006 022 0
0620 060 030 WABCO 964 006 021 0

Shock absorber
suitable for TGS, TGA
Version Gas pressure, twin-tube
Fastening Eye/eye
Installation location driver's cab
Order number Comparative number
9270 290 977 Sachs 290 977
9270 290 978 Sachs 290 978

134
Driver's cab 1
Gas spring

TGX, TGS, TGA


for equipment compartment hatch
suitable for TGX, TGS, TGA
Spring force 50 N
Length 485 mm
Order number
9279 147 000

Gas spring
for front flap
suitable for TGA
Spring force N Length mm Order number
200 685 9279 088 000
160 585 5230 331 515

Gas spring
for side flap
suitable for TGA
Spring force 350 N
Length 424.5 mm
Order number
9271 000 098

(Illustration similar)

Driver cab tilting pump


suitable for TGX, TGS
Order number
5237 236 020

Driver cab tilt cylinder


Pressure 250 bar
Outer thread M12 x 1.5

suitable for Stroke mm Bore hole ∅ mm Order number


TGX 723 25/16 5230 281 218
TGS, TGA 656 25 5237 236 123

www.europart.net 135
1
Truck styling
Skirting protection bracket
TGX, TGS, TGA

with TÜV certificate


suitable for TGX
Version Standard
Diameter 76 mm
Material V2A stainless steel
Surface high-gloss polished
Order number
1002 021 400

Skirting protection bracket


with TÜV certificate
suitable for TGX
Version MEGA
Diameter 76 mm
Material V2A stainless steel
Surface high-gloss polished
Order number
1002 021 401

Skirting protection bracket


with TÜV certificate
suitable for TGS
Version Standard
Diameter 76 mm
Material V2A stainless steel
Surface high-gloss polished
Order number
1002 021 402

Skirting protection bracket


with TÜV certificate
suitable for TGA
Driver cab XL/XLX/XXL
Version Standard
Diameter 76 mm
Material V2A stainless steel
Surface high-gloss polished
Order number
1002 021 300

136
Truck styling 1
Skirting protection bracket

TGX, TGS, TGA


with TÜV certificate
suitable for TGA
Driver cab XL//XLX/XXL
Version MEGA
Diameter 76 mm
Material V2A stainless steel
Surface high-gloss polished
Order number
1002 021 302

Skirting protection bracket


with TÜV certificate
suitable for TGA
Driver cab L/LX
Version Standard
Diameter 76 mm
Material V2A stainless steel
Surface high-gloss polished
Order number
1002 021 303

Skirting protection mini-brush


with TÜV certificate
suitable for TGA
Diameter 76 mm
Material V2A stainless steel
Surface high-gloss polished
Scope of supply
without headlamp
Order number
1002 021 404

Skirting protection mini-brush


with TÜV certificate
suitable for TGX
Diameter 76 mm
Material V2A stainless steel
Surface high-gloss polished
Scope of supply
without headlamp
Order number
1002 021 405

www.europart.net 137
1
Truck styling
Headlight bracket
TGX, TGS, TGA

installation without removing ceiling panel, welded-on lugs


suitable for TGX, TGA
Driver cab XXL/XLX
Version for 4 headlamps
Installation location top
Diameter 60 mm
Material V2A stainless steel
Surface high-gloss polished
Scope of supply
without headlamp
Order number
9150 503 012

Headlight bracket
installation without removing ceiling panel
suitable for TGX, TGS, TGA
Driver cab XL/M/L
Version for 4 headlamps
Installation location top
Diameter 60 mm
Material V2A stainless steel
Surface high-gloss polished
Scope of supply
without headlamp
Order number
8520 165 031

Headlight bracket
secured by clamps at original points
suitable for TGS, TGA
Driver cab LX
Version for 4 headlamps
Installation location top
Diameter 60 mm
Material V2A stainless steel
Surface high-gloss polished
Scope of supply
without headlamp
Order number
9156 503 017

138
Truck styling 1
Headlight bracket

TGX, TGS, TGA


for installation at original points
suitable for TGX
Version for 4 headlamps
Installation location bottom
Diameter 60 mm
Material V2A stainless steel
Surface high-gloss polished
Scope of supply
without headlamp
Order number
8520 165 032

Headlight bracket
with TÜV certificate
suitable for TGS
Version for 4 headlamps
Installation location bottom
Diameter 60 mm
Material V2A stainless steel
Surface high-gloss polished
Scope of supply
without headlamp
Order number
1002 004 101

Headlight bracket
with TÜV certificate
suitable for TGA
Version for 4 headlamps
Installation location bottom
Diameter 60 mm
Material V2A stainless steel
Surface high-gloss polished
Scope of supply
without headlamp
Order number
9156 503 010

www.europart.net 139
1
Truck styling
Headlight bracket
TGX, TGS, TGA

for installation at original points, with TÜV certificate


suitable for TGA
Driver cab LX
Version for 4 headlamps
Installation location bottom
Diameter 60 mm
Material V2A stainless steel
Surface high-gloss polished
Scope of supply
without headlamp
Order number
8526 165 030

H1 spotlight
Rallye 3003
Version Halogen, with LED position light
Installation side left, right
Colour clear
Voltage 12/24 V
Scope of supply
with LEDs
Order number
0009 797 431

H1 spotlight
Luminator-Chromium CELIS®
Version Halogen, with CELIS® position light
Installation side left/right
Colour clear
Voltage 12/24 V
Order number
0007 560 211

Fastening clamp
for headlight
for mounting on the impact protection of light bar
Material Stainless steel
∅ mm Order number
60 9150 001 430
76 1002 001 431

140
MAN
2 TGM, TGL

142
2

Engine ......................................................................................................................144-153
Drive .........................................................................................................................154-159
Suspension .............................................................................................................160-163
Axle and steering...................................................................................................164-175
Braking system ......................................................................................................176-181
Pneumatic system .................................................................................................182-195
Lighting and electrics............................................................................................196-205
Bodywork ................................................................................................................206-213
Driver’s cab.............................................................................................................214-229
Truck styling............................................................................................................230-231

www.europart.net 143
Engine

Engine bearing
2 suitable for TGL
Motor type e.g. D 0834
Installation location front
TGM, TGL

Order number
9079 993 023

Cylinder head gasket set


suitable for TGM, TGL
Motor type e.g. D 0836 LF 40/41/44
Version 1 x per engine
Order number
(on request) 8002 047 198

Cylinder head gasket set


suitable for TGM, TGL
Motor type e.g. D 0834 LF 40-42/50-55
Version 1 x per engine
Order number
(on request) 8002 043 807

Cylinder head gasket set


suitable for TGM, TGL
Motor type e.g. D 0836 LFL 01-06/10
Version Valve cover gasket = metal gasket, 1 x per cylinder head,
3 x per engine
Order number
8002 066 002

Oil pan gasket


suitable for TGL
Motor type e.g. D 0834 LFL 01-04/20/40-42/50-55
Material rubber
Order number
8002 051 435

144
Engine

Oil pan gasket


suitable for TGM, TGL
2
Motor type e.g. D 0836 LFL 01-06/10/40-41/44/50-55
Material Rubber

TGM, TGL
Order number
8002 535 931

Valve cover gasket


suitable for TGL
Motor type e.g. D 0834 LF 40-42/50-55, LOH 50-51

Order number
8002 041 980

Valve cover gasket


suitable for TGM, TGL
Motor type e.g. D 0836 LF 40-41/44, LOH 40-41/51-52
Order number
8002 051 797

Cylinder head screw set


suitable for TGM, TGL
Version external TORX®
Thread M14
Length 152 mm
Motor type Contents Order number
e.g. D 0834 LF 40-42/50-54 16 pieces 8002 046 939
e.g. D 0836 LF 41/43-44/50-55 24 pieces 8002 046 938

Oil pressure sensor


Outer thread M18 x 1.5
Switching pressure 0,25+0,15 bar
Number of connections 3
Thread length 12 mm
Order number
5234 210 109

www.europart.net 145
Engine

2 Oil filter
suitable for TGM, TGL
External diameter 82.5 mm
TGM, TGL

Inner diameter 36 mm
Height 169 mm
Order number
9020 009 510

Hydraulic filter
suitable for TGM, TGL
External diameter 60 mm
Inner diameter 18/18 mm
Height 100.5 mm
Order number
9025 503 090

Fuel filter
suitable for TGM, TGL
External diameter 95 mm
Inner diameter 14/46 mm
Height 172.5 mm
Order number
9020 001 059

Fuel filter
suitable for TGM, TGL
Length 76 mm
Width 76 mm
Height 54 mm
Order number Comparative number
9750 053 002 Hengst E0530K02

146
Engine

Fuel filter 2
suitable for TGM, TGL
External diameter 50 mm

TGM, TGL
Height 41 mm
Order number Comparative number
9750 103 122 Hengst E11S03 D65

Air filter
suitable for TGM, TGL

Outer ∅ x Inner ∅ x Height mm Order number Comparative number


255 x 129.5 x 458 9750 000 811 Hengst E811L
227 x 130 x 305 9750 103 798 Hengst E661L
228 x 150 x 417 9750 103 835 Hengst E706L

Urea filter
suitable for TGM, TGL
External diameter 67/70 mm
Height 76 mm
Order number Comparative number
3565 430 767 Hengst E101U D178

Connecting rod bearing


for 6 cylinders
suitable for TGM
Motor type e.g. D 0836 LFL 01
Order number
1910 042 508

www.europart.net 147
Engine
Exhaust turbocharger
in exchange

2 suitable for
Motor type
TGL
e.g. D 0834 LFL 40
Order number
(on request) 1902 024 577
TGM, TGL

Accessories
Description Order number
Add-on set 1902 024 578

Exhaust turbocharger
as replacement
suitable for TGM, TGL
Motor type e.g. D 0836 LF 01-05/LFL 01-06
Order number
(on request) 1902 124 701

Accessories
Description Order number
Add-on set (on request) 1911 124 701

Exhaust turbocharger
in exchange
suitable for TGM, TGL
Motor type e.g. D 0836 LFL 40
Order number
(on request) 1902 028 083

Exhaust turbocharger
in exchange
suitable for TGM, TGL
Motor type e.g. D 0836 LFL 50/53
Order number
(on request) 1902 027 929

Charge air cooler


Width 535 mm
Vehicle type Height mm Depth mm Order number
TGL 512 50 0376 728 701
TGM, TGL 712 50 5230 231 849
TGM, TGL 712 64 0376 746 301

This figure corresponds to 0376 728 701

148
Engine
Charge air hose
suitable for TGM, TGL
Length 225 mm
Inner ∅ mm Thickness mm Order number
2
63.5 3.7 5233 010 886
78.5 4.2 1911 043 426

TGM, TGL
(Illustration similar)

Engine radiator
Width 608 mm
Depth 40 mm
suitable for Length mm Order number
TGL 590 0376 728 671
TGM, TGL 705 0376 730 621

Water pump
with seal
suitable for TGM, TGL
Number of blades 8
Length 224 mm
Width mm Thickness mm Order number
180 127 9072 201 106
185 126 9072 201 113

Thermostat
with seal
suitable for TGM, TGL
Diameter 67 mm
Opening temperature °C Order number
79 9100 210 579
83 9100 000 007

Service parts
Description Order number
Thermostat sealing ring 8022 502 128

Fan wheel
Number of blades 8
suitable for ∅ mm Order number
TGL 600 mm 3880 268 017
TGM, TGL 650 mm 3880 268 013

www.europart.net 149
Engine

2 Radiator fan coupling


without fan
suitable for TGL
TGM, TGL

Diameter 187 mm
Order number
0376 757 671

Radiator fan coupling


without fan
suitable for TGM, TGL
Diameter 186 mm
Order number
9100 268 280

Radiator fan coupling


without fan
suitable for TGL
Diameter 165 mm
Order number
5230 215 463

Central silencer
suitable for TGM, TGL
Standard Euro 3
Order number Comparative number
8703 049 396 (on request) Dinex 49396

Accessories
Description Order number
Front pipe, Length 538 mm 5247 047 261
Front pipe, Length 597 mm *5230 238 133
Flexible pipe, Length 300 mm 5247 047 259
Exhaust pipe, centre, Length 268 mm 8704 267 258
Exhaust tailpipe, Length 230 mm 5230 236 979
Exhaust pipe clamp, Diameter 85.5 mm 8730 106 200
Exhaust pipe clamp, Diameter 90.5 mm 8730 117 400
Exhaust pipe clamp, Diameter 100.5 mm 5247 099 700
* only TGL

150
Engine

Central silencer 2
suitable for TGM, TGL
Standard Euro 3

TGM, TGL
Order number Comparative number
5230 236 597 Dinex 49397

Accessories
Description Order number
Front pipe, Length 538 mm 5247 047 261
Front pipe, Length 597 mm *5230 238 133
Flexible pipe, Length 300 mm 5247 047 259
Exhaust pipe, centre, Length 268 mm 8704 267 258
Exhaust tailpipe, Length 1142 mm 8700 047 682
Exhaust pipe clamp, Diameter 85.5 mm 8730 106 200
Exhaust pipe clamp, Diameter 90.5 mm 8730 117 400
Exhaust pipe clamp, Diameter 100.5 mm 5247 099 700
* only TGL

Rear silencer
suitable for TGM, TGL
Standard Euro 4
Order number Comparative number
4260 047 311 Dinex 47311

(Illustration similar)

Accessories
Description Order number
Front pipe, Length 597 mm *5230 238 133
Flexible pipe, Length 300 mm 8700 472 590
Intermediate pipe *5230 237 605
Front pipe, Length 496 mm **4260 048 202
Exhaust tailpipe, Length 230 mm 5230 236 979
Exhaust pipe clamp, Diameter 85.5 mm 8730 106 200
Exhaust pipe clamp, Diameter 90.5 mm 8730 117 400
Exhaust pipe clamp, Diameter 100.5 mm 5247 099 700
* only TGL
** only TGM

www.europart.net 151
Engine

2 Rear silencer
suitable for TGM, TGL
Standard Euro 5
TGM, TGL

Order number Comparative number


4260 047 346 Dinex 47346

(Illustration similar)

Accessories
Description Order number
Flexible pipe, Length 300 mm 8700 472 590
Exhaust pipe, Length 268 mm * 8704 267 258
Exhaust tailpipe, Length 230 mm 5230 236 979
Exhaust pipe clamp, Diameter 85.5 mm 8730 106 200
Exhaust pipe clamp, Diameter 90.5 mm 8730 117 400
Exhaust pipe clamp, Diameter 100.5 mm 5247 099 700
* only TGL

Fuel tank
steel
suitable for TGM, TGL
Version 2 bayonet openings
Volume 200 l
Width 615 mm
Height 350 mm
Length 1050 mm
Order number
(Illustration similar)
8730 027 420

Accessories
Description Order number
1 x Fuel cap, lockable, with ventilation 1129 289 577
1 x Fuel cap, without lock, with vent 1129 200 042
1 x Add-on set (2 brackets, 2 tightening straps, 2 tightening strap rubbers for each) (on request) 8730 027 421
2 x Console rubber 9660 221 280
2 x Tightening strap 8730 027 404
2 x Tightening strap rubber 9660 000 707
1 x Tank sensor 5230 036 015
1 x Connection set 8730 102 488
1 x Blind cover 9660 001 906
1 x Fuel Anti-syphon 9668 010 090

152
Engine
Fuel tank
steel
suitable for
Version
TGM, TGL
2 bayonet openings
2

TGM, TGL
Volume l Dimensions mm Order number
220 615 x 515 x 800 9660 022 460
300 615 x 515 x 1050 9666 003 210

Accessories
Description Order number
1 x Fuel cap, lockable, with ventilation 1129 289 577
1 x Fuel cap, without lock, with vent 1129 200 042
2 x Console (on request) 9660 022 453
4 x Console rubber 9660 022 455
2 x Tightening strap (on request) 9660 022 454
2 x Tightening strap rubber 9660 000 703
1 x Tank sensor 9660 022 481
1 x Connection set 8730 102 488
1 x Blind cover 9660 001 906
1 x Fuel Anti-syphon 9668 010 090
APDesign.de

ER
PRE

M
TN

IU M
PA R

Wir lieben Qualität


Die hohen Standards der Erstausrüstung setzen wir auch bei Ersatzteil-Federn um:
optimale und zuverlässige Qualität.

www.europart.net
www.schomaecker.de
153
Drive

V-belt kit
2 suitable for
Type
TGM, TGL
AVX
Length 1275 mm
Width 13
TGM, TGL

Height 9 mm
Order number
1865 064 200

Ribbed V-belt
suitable for TGM, TGL
Number of ribs Length mm Order number
4 1390 3560 401 390
8 1275 1851 698 161

Ribbed V-belt
suitable for TGM, TGL
Number of ribs 4
Length mm Order number
1380 2540 101 209
1366 2540 101 210

Poly-V belt tensioner


suitable for TGM, TGL
Pulley diameter 74 mm
Height 34/90 mm
Order number
5238 007 437

154
www.contitech.de/luftfedern-ersatz

Zur Sicherheit:
Luftfedersysteme in Original-
Qualität von ContiTech

q OEM-Qualität kompromisslos – das richtige Produkt für jede Anwendung


q Exakt ausgelegte Federungseigenschaften – einfache und passgenaue Montage
q Maximale Lebensdauer bei höchsten Beanspruchungen
q Über 350 Partner weltweit – ContiTech Air Spring Systems verfügt über
Produktionsstandorte in Deutschland, Ungarn, China, Türkei, Mexiko und Korea
q Ein Zentrallager für den Ersatzmarkt gewährleistet eine optimale Lieferfähigkeit
über das gesamte Produktspektrum

ContiTech – World’s Market Leader in Air Spring

ContiTech Luftfedersysteme GmbH


30165 Hannover, Germany
E-Mail: [email protected]
Drive

2
TGM, TGL

1 2
Deflection pulley/guide pulley
suitable for TGM, TGL
Illustration Height mm Pulley ∅ mm Order number
1 33.9 74.15 3563 860 050
2 36 65 5930 550 030

Flywheel
suitable for TGL
Motor type e.g. D 0834
Version with external ring gear
Diameter 362 mm
Order number
(on request) 5230 210 422

Clutch kit
as replacement
suitable for TGL
Diameter 362 mm
Number of teeth 10
Scope of supply
disc, automatic unit, central release bearing
Order number Comparative number
9270 710 011 Sachs 3400 710 011

156
Drive

Clutch kit 2
In exchange
suitable for TGM, TGL

TGM, TGL
Diameter 395 mm
Number of teeth 10
Scope of supply
disc, automatic unit, central release bearing
Order number Comparative number
9270 121 701 Sachs 3400 121 701

Clutch kit
in exchange
suitable for TGM
Diameter 362 mm
Number of teeth 10
Scope of supply
disc, automatic unit, central release bearing
Order number Comparative number
9270 710 001 Sachs 3400 710 001

Clutch kit
in exchange
suitable for TGM, TGL
Diameter 395 mm
Number of teeth 10
suitable for release fork with rollers
Scope of supply
clutch disc, automatic unit, central release bearing
Order number Comparative number
9277 003 640 (on request) Sachs 3400 700 364

www.europart.net 157
Drive

2 Clutch kit
in exchange
suitable for TGL
TGM, TGL

Diameter 362 mm
Parameter MF362
Number of teeth 10
Scope of supply
disc, automatic unit, without release bearing
Order number Comparative number
9270 700 303 Sachs 3400 700 303

Release fork
for automatic gearbox
suitable for TGM, TGL
Order number
5231 266 918

Storage
for drive shaft
suitable for TGM, TGL
Inner ∅ mm Order number
65 9220 001 046
75 9220 001 088

158
Suspension
Parabolic spring
front axle

2 suitable for
Form
TGL
1K
Number of leaves 1
Thickness 29 mm
TGM, TGL

Width 90 mm
Length front/rear 850/875 mm
Bushing front/rear 18/56, 18/56 mm
Axle load 3,4 t
Order number
1073 080 000

1 2
Parabolic spring
front axle
suitable for TGM
Form 1J
Number of leaves 2
Width 90 mm
Illustration Thickness Length front/rear Bushing front/rear Axle load t Order number
mm mm mm
1 57 850/875 18/56/18/56 4,8 1073 036 000
2 66 925/925 20/60/20/60 7,5 1073 048 000

Spring hoop
suitable for TGM, TGL
Form 0
Interior width 91 mm

(Illustration similar)

Thread Length mm Order number


M16 140 1098 987 140
M18 x 2 205 1301 907 205

Accessories
Description Thread Height mm Order number
Flat collar nut M16 x 1.5 18 1303 161 580
Flat collar nut M18 x 2 24 5230 000 076

160
Suspension
Parabolic spring
rear axle
suitable for
Form
TGM, TGL
1K
2
Number of leaves 1
Thickness 38 mm

TGM, TGL
Width 80 mm
Length front/rear 845/845 mm
Axle load 5,2 t
Order number
1073 081 000

Parabolic spring
rear axle
suitable for TGM
Form 1BJ
Number of leaves 2/1
Thickness 110 mm
Width 80 mm
Length front/rear 910/890 mm
Axle load 11,5 t
Order number
1073 011 000

Parabolic spring
Rear axle
suitable for TGM
Form 8B
Number of leaves 2/1
Thickness 118 mm
Width 100 mm
Length front/rear 825/825 mm
Axle load 11 t
Order number
1072 919 000

www.europart.net 161
Suspension
Spring hoop
Form 0

2
TGM, TGL

(Illustration similar)

Vehicle type Thread Interior width mm Length mm Order number


TGM, TGL M16 x 1.5 81 335 (on request) 5230 110 335
TGM M27 x 2 101 340 1301 527 340

Accessories
Description Thread Height mm Order number
Hexagon nut M16 x 1.5 16 6624 016 150
Hexagon nut M27 x 2 40 1303 270 211

Spring leaf
rear axle
suitable for TGM
Length 263.9 mm
Width 147.2 mm
Thickness 124 mm
Installation side Order number
left 5232 100 555
right 5232 100 554

Air spring
suitable for TGL
External diameter 259 mm

This figure corresponds to 1780 486 201

Version Height mm Order number Comparative number


without piston 448 1780 486 201 Conti 4862 N1 P01
with piston 264 1780 486 202 Conti 4862 N1 P02

162
Suspension

Shock absorber 2
suitable for TGL
Version Oil pressure, twin-tube

TGM, TGL
Fastening Pin/eye
Installation location front axle
Order number Comparative number
9270 311 891 Sachs 311 891

Shock absorber
Version oil pressure, twin-tube system
Fastening eye/eye

suitable for Installation location Order number Comparative number


TGM front axle (on request) 9200 016 014 Sachs 313 745
TGM rear axle 9201 064 693 Sachs 106 469
TGM rear axle 9202 809 370 Sachs 280 937
TGM rear axle (on request) 9200 004 920 Sachs 314 920
TGM rear axle 9200 026 055 Sachs 314 645
TGL rear axle 9270 311 895 Sachs 311 895

Shock absorber
suitable for TGL
Version oil pressure, twin-tube system
Fastening eye/eye
Installation location rear axle
Order number Comparative number
9200 313 010 Sachs 313 010

www.europart.net 163
Axle and steering

2 Drag-link
suitable for TGL
Version torque strut, adjustable on one side
TGM, TGL

Length 840 mm
Cone diameter 22 mm
Pipe diameter 38 mm
Order number
9079 923 405

Drag-link
suitable for TGM, TGL
Version torque strut
Installation location drop arm to the 1st front axle
Length 860 mm
Cone diameter 26 mm
Pipe diameter 38 mm
Order number
9079 991 024

Drag-link
suitable for TGL
Version pendulum rod
Length 864 mm
Cone diameter 22 mm
Pipe diameter 38 mm
Order number
9070 031 313

Drag-link
suitable for TGL
Version adjustable on one side
Installation location drop arm to the 1st front axle
Length 820 mm
Cone diameter 22 mm
Pipe diameter 38 mm
Order number Comparative number
9050 189 501 Lemförder 31895 01

164
Sicherheit – Ohne Kompromisse
Nkw-Ersatzteile der Marke TRW Proequip stehen für kompromisslose
Erstausrüster-Qualität: stark, zuverlässig, langlebig – in allen Fahrsitua-
tionen und unter schwersten Bedingungen. Bremsenteile, Lenkungs-
und Aufhängungskomponenten sowie Stoßdämpfer bilden ein
vollständiges Ersatzteilangebot für Nkw-Werkstätten. Mit mehr als
100 Jahren Erfahrung als Erstausrüster fertigt TRW alle Produkte nach
strengen OE-Standards und testet unter härtesten Bedingungen.
Nkw-Profis vertrauen auf TRW Proequip.

www.trwaftermarket.com/trwproequip
NKW-TEILE VOM ERSTAUSRÜSTER
Axle and steering

Drag-link
2 suitable for TGM
Version adjustable on one side
Installation location drop arm to the 1st front axle
TGM, TGL

Length 882 mm
Cone diameter 30/26 mm
Pipe diameter 42 mm
Order number Comparative number
9053 459 101 Lemförder 34591 01

Steering Track Rod


suitable for TGM
Version guide rod, adjustable on one side
Installation location front axle
Length 1679 mm
Cone diameter 30 mm
Pipe diameter 50 mm
Order number
9079 925 212

Steering Track Rod


suitable for TGM
Version guide rod, adjustable on one side
Installation location front axle
Length 1588 mm
Cone diameter 30 mm
Pipe diameter 52 mm
Order number
9070 900 056

Steering Track Rod


suitable for TGM, TGL
Version guide rod, adjustable on both sides
Length 1632 mm
Cone diameter 22 mm
Pipe diameter 36 mm
Order number
5230 287 966

166
Axle and steering

Steering Track Rod


suitable for TGL 2
Version guide rod, adjustable on both sides
Length 1632 mm

TGM, TGL
Cone diameter 22 mm
Pipe diameter 42 mm
Order number Comparative number
9050 459 601 Lemförder 34596 01

Ball joint
for track rod/drag link

suitable for Threadtype Outer thread Length mm Cone-∅ mm Order number


TGL right-hand thread M24 x 1.5 95 20 9070 900 012
TGM right-hand thread M24 x 1.5/M30 x 1.5 120 30 9070 900 117
TGM left-hand thread M24 x 1.5/M30 x 1.5 120 30 9070 900 123
TGL right-hand thread M28 x 1.5 105 22 9070 900 002
TGL left-hand thread M28 x 1.5 105 22 9070 900 006
TGM, TGL right-hand thread M30 x 1.5 115 26 9070 900 003
TGM right-hand thread M30 x 1.5 119 30 9079 911 393
TGM, TGL right-hand thread M30 x 1.5 150 30 9070 900 099

Ball joint
suitable for TGM, TGL
Installation location gear shift linkage
Threadtype right-hand thread
Length 113 mm
Outer thread M14 x 1.5
Order number
9070 000 069

www.europart.net 167
Axle and steering
Ball joint
suitable for TGM, TGL
Length 55 mm
2 Outer thread M12 x 1
Material cast steel
TGM, TGL

(Illustration similar)

Installation location Threadtype Order number


down shift linkage right-hand thread 9073 304 100
upper shift linkage left-hand thread 9073 304 200

Transverse link
suitable for TGL
Version adjustable on one side
Length 840 mm
Cone diameter 20 mm
Pipe diameter 50 mm
Order number Comparative number
9079 991 238 Lemförder 23194 01

Repair kit
for transverse link
suitable for TGL
Model PROEQUIP
Order number
9079 016 990

Power-steering pump
in exchange
suitable for TGM, TGL
Version hydraulic
Connection right
Order number
9074 202 310

168
Axle and steering

TGM, TGL
1 2 3 4 5

Stabilizer mounting
Illustration suitable for Installation location Outer ∅ mm Inner ∅ mm Length mm Order number
- TGL front axle 42 26 46 1597 040 005
1 TGM, TGL front axle 47 16 47 1593 000 130
1 TGM, TGL front axle 50 16 47 5237 220 059
3 TGM front axle 76 46 50 6170 367 007
4 TGM, TGL front axle 85 50 72 9290 002 121
5 TGL Front axle/rear axle 42.5 14 35 5231 362 299
- TGL rear axle 53 32 46 5230 362 244
1 TGM rear axle 68 22 62 5230 000 222
2 TGM, TGL Rear axle, inner 83 55 70 5230 000 224
2 TGM rear axle 90 60 61 5823 327 083

Stabiliser bearing section


suitable for TGL
Installation location front axle
External diameter 75 mm
Inner diameter 50 mm
Length 50 mm
Material rubber/metal
Order number
1599 004 100

Double-joint drive shaft


in exchange
suitable for TGM, TGL
Installation location front axle
Scope of supply
without thrust washers

Version Installation side Length mm Order number


simple splines left 1252 5230 275 644
double splined right 1092 5230 275 643

Inner ring
for drive shaft
suitable for TGM, TGL
Dimensions 45 x 50 x 55 mm
Order number
9220 000 295

www.europart.net 169
Axle and steering
Repair kit
for drive shaft bearing
suitable for TGM, TGL
2 Scope of supply
2 needle roller bearings, 4 axial seals
Order number
TGM, TGL

9030 001 250

Repair kit
kingpin
suitable for TGL
Bolt diameter 38 mm
Bolt length 174 mm
Scope of supply
1 kingpin, 1 bush, 2 thrust washers, 2 grease nipples, 2 sealing washers, 2 retaining
rings, 1 axial seal, 2 socket screws, 1 needle roller bearing
Order number
5821 330 033

Repair kit
kingpin
suitable for TGM
Bolt diameter 50 mm
Bolt length 109 mm
Scope of supply
2 kingpins, 2 bushes, 2 needle roller bearings, 1 thrust washer, 3 sealing washers,
5 axial seals, 2 socket screws, 1 retaining ring, 1 snap ring
Order number
1583 000 560

Wheel bearing set


suitable for TGM
Installation location rear axle
External diameter 160 mm
Inner diameter 140 mm
Height 105 mm
Scope of supply
with O-ring
Order number
5234 200 342

170
Axle and steering
Wheel bearing set
suitable for TGL
External diameter 140 mm
Inner diameter 82 mm 2
Width 115 mm
Order number

TGM, TGL
6958 500 395

Wheel bearing set


suitable for TGM, TGL
External diameter 130 mm
Inner diameter 78 mm
Width 90.5 mm
Scope of supply
with hub and sensor ring
Order number
8000 054 150

Wheel hub
suitable for TGM
Installation location rear axle
Order number
1325 067 611

Compact bearing
suitable for TGM
Installation location front axle
Version with pulse wheel
Order number
8001 000 210

Compact bearing
suitable for TGM, TGL
External diameter 145 mm
Inner diameter 55 mm
Width 95 mm
Scope of supply
with hub and sensor ring
Order number
8000 054 110

www.europart.net 171
Axle and steering

2 Grooved ball bearing


suitable for TGM, TGL
Type 6005-2RS1
TGM, TGL

External diameter 47 mm
Inner diameter 25 mm
Height 12 mm
Order number
8001 600 522

Grooved ball bearing


suitable for TGM, TGL
Type 6005 2Z
External diameter 47 mm
Inner diameter 25 mm
Order number
2300 015 014

(Illustration similar)

Shaft sealing ring


for wheel hub
suitable for TGM
Installation location rear axle inner, with ABS pulse wheel
External diameter 172 mm
Inner diameter 132 mm
Height 12 mm
Order number
5235 030 333

Shaft sealing ring


for wheel hub
suitable for TGM
Installation location Rear axle, outer
External diameter 160 mm
Inner diameter 132 mm
Height 10 mm
Order number
8002 536 787

Repair kit
for pulse wheel
suitable for TGL
Number of holes 80
Scope of supply
with axial seal
Order number
5230 524 006

172
Axle and steering
Axle nut
Vehicle type Thread Order number
TGM M58 x 1.5 5236 200 086
TGL M75 x 1.5 5230 316 427 2
TGM M100 x 1.5 5236 200 092

TGM, TGL
'A' frame
suitable for TGM
Installation location Rear axle
Length 627 mm
Bore hole diameter 25 mm
Pipe diameter 48 mm
Distance between holes 125 mm
Order number
9070 001 019

'A' frame
suitable for TGM
Version with molecular bearing
Length 642/582 mm
Bore hole diameter 25 mm
Pipe diameter 46 mm
Distance between holes 152 mm
Order number
(on request) 9070 706 155

Trailing arm
suitable for TGM
Version with molecular bearing
Length 661 mm
Bore hole diameter 19 mm
Pipe diameter 40 mm
Distance between holes 130 mm
Order number
(on request) 9070 206 324

www.europart.net 173
Axle and steering

2 Trailing arm
suitable for TGM
Version with molecular bearing
TGM, TGL

Length 661 mm
Bore hole diameter 19 mm
Pipe diameter 40 mm
Distance between holes 130 mm
Order number
9070 000 157

Repair kit
for axle strut, trailing arm
suitable for TGM
Version with molecular bearing
Bore hole diameter 19 mm
Distance between holes 130 mm
Order number Comparative number
9070 038 201 (on request) Lemförder 19726 01

Wheel bolt

suitable for Installation location Outer thread Length mm Order number


TGM front axle M20 x 1.5 72 2213 002 753
TGM front axle M22 x 1.5 65 2213 002 751
TGM, TGL front axle M18 x 1.5 58 5235 010 152
TGL rear axle M18 x 1.5 81 5235 010 123
TGM rear axle M22 x 1.5 79 3167 010 174
TGM rear axle M22 x 1.5 110 2213 002 752

Wheel nut
Surface phosphated

suitable for Thread ∅ mm Height mm Order number


TGL M18 x 1.5 40 25 1303 181 551
TGM, TGL M20 x 1.5 45 26 1303 201 551
TGM M22 x 1.5 46 27 1303 221 551

174
Many years,
many kilometres...
We have the matching part for every age class!

www.europart.net
Braking system

2
TGM, TGL

1 2 3 4

Brake disc
Installation location Front axle
Version Internally ventilated
Illustration suitable Outer ∅ Height Thickness Hole circle ∅ Number of Order number
for mm mm mm mm holes
1 TGL 335 93 34 122 10 2072 335 001
2 TGM 377 110.5 45 144 12 2072 377 002
3 TGM 377 128 45 195 10 2072 377 001
4 TGM 432 130 45 168 12 2072 432 004

1 2 3

Brake disc
Installation location Rear axle
Version Internally ventilated
Illustration suitable Outer ∅ Height Thickness Hole circle ∅ Number of Order number
for mm mm mm mm holes
1 TGL 335 118 34 176 10 2036 063 950
1 TGL 335 118 34 176 10 2036 063 930
2 TGM 432 135 45 235 10 2072 432 005
3 TGM 377 110.5 45 144 12 2072 377 002

Suitable brake piston resetting tools available from EUROPART!

176
Braking system

Bolt 2
suitable for TGL
Thread M14 x 1.5

TGM, TGL
Length 50 mm
Property class 10.9
Order number
6621 014 050

TORX® bolt
suitable for TGM
Property class 10.9
Surface phosphated

Thread Length mm Tightening torque Nm Order number


M16 x 1.5 55.5 480 5239 022 812
M16 x 1.5 100 360 5230 251 896
M18 x 1.5 60 480 1593 101 524

Brake pad set


Front axle/rear axle
suitable for TGL
Brake system Knorr SB/SN 5
WVA no. 29183
Contents of set 4
Coating length 185 mm
Lining width 84 mm
Lining thickness 27.00 mm
Scope of supply
with accessories
Order number
2129 115 008

www.europart.net 177
Braking system

2 Brake pad set


suitable for TGM, TGL
Contents of set 4
TGM, TGL

Lining thickness 30.00 mm


Scope of supply
with accessories

Installation location Brake system WVA no. Coating length mm Lining width mm Order number
front axle Knorr SB 6000 29095 210,6 92,5 2129 095 006
Front axle/rear axle SB/SN 7 29061 247,5 109,5 2323 405 206

Brake pad set


suitable for TGM
Brake system SB/SN 7
WVA no. 29059
Contents of set 4
Coating length 247,5 mm
Lining width 109,5 mm
Lining thickness 30.00 mm
Application range
specifically for short-distance use
Scope of supply
with accessories
Order number
2323 405 207

Brake caliper
suitable for TGL
Installation location front axle
Version standardised

Type Installation side Order number Comparative number


SN5033RC left 3400 047 072 Knorr K005611
SN5023RC right 3400 047 071 Knorr K005610

Accessories
Description Order number
Guide sealing set 3400 047 188
Adjuster cap set 3411 000 290

178
Braking system

Brake caliper
suitable for TGM 2
Installation location front axle
Version standardised

TGM, TGL
Type Installation side Order number Comparative number
SN7219RC left 3450 414 779 Knorr K003816
SN7209RC right 3450 414 778 Knorr K003815

Accessories
Description Order number
Pressure pad set 3400 110 013
Guide sealing set 5034 343 812
Adjuster cap set 3411 000 290

Brake caliper
suitable for TGM
Installation location rear axle
Version standardised

Type Installation side Order number Comparative number


SN7197RC left 3450 414 774 Knorr K003811
SN7217RC right 3450 414 775 Knorr K003812

Accessories
Description Order number
Pressure pad set 3400 110 013
Guide sealing set 5034 343 812
Adjuster cap set 3411 000 290

Brake anchor plate


suitable for TGM

Brake system Installation location Order number Comparative number


Knorr SB/SN 6 Front axle/rear axle 3400 046 948 Knorr K002979
Knorr SB/SN 7 rear axle 3450 412 140 Knorr K001278

www.europart.net 179
Braking system

2
TGM, TGL

1 2

Brake lining set


Lining thickness 17.00 mm
Contents of set 8
Illustration suitable for WVA no. Dimensions mm Order number
1 TGM 19494 410 x 163 2119 486 008
2 TGM, TGL 19495 410 x 183 2119 487 008

Brake pad rivet


Standard DIN 7338
Diameter 8 mm
Form Material Length mm Order number
B Copper 15 2101 081 540
C Steel 18 2100 004 634

Brake drum
suitable for TGM
Number of holes 10
Inner diameter 410 mm
Diameter of hole circle 335 mm
Hub diameter 298 mm
Installation location Brake path mm Order number
front axle 172 2072 410 016
rear axle 192 2072 410 002

180
Braking system

TGM, TGL
1 2

Slack adjuster
suitable for TGM
Version automatic
Bore hole diameter 14 mm
Distance between holes 145 mm
Number of holes 1
Number of teeth 26
Illustration Form Order number Comparative number
1 left offset, -56 mm 3400 801 800 Haldex 80180C
2 right offset, +56 mm 3400 801 810 Haldex 80181C

EUROPART® – a powerful brand


Alongside well-known manufacturer's brands, EUROPART
also offers a strong assortment of its own-brand products
with more than 5000 items from the various EUROPART
ranges.
ta
Top quality a
fair price.
Your advantages:
Low-cost alternative for OE standard
Maximum availability at 200 locations in 28 countries
Increase your competitiveness
Consistent service package

www.europart.net 181
Pneumatic system

Air dryer
2 1-chamber system with integrated pressure regulator
suitable for TGM, TGL
Connection 1: M22 x 1,5
21: M22 x 1,5, VOSS 232
TGM, TGL

22: M16 x 1,5, VOSS 232


Operating pressure max. 13 bar
Cut-off pressure 12,5 ± 0,2 bar
Version Order number Comparative number
without heating 0174 107 200 WABCO 432 410 720 0
with heating 0174 107 350 WABCO 432 410 735 0

Air dryer
in exchange
1-chamber system with integrated pressure regulator
suitable for TGM, TGL
Connection 1: M22 x 1,5
21: M22 x 1,5, VOSS 230
22: M16 x 1,5, VOSS 230
Operating pressure max. 13 bar
Cut-off pressure 12,5 ± 0,2 bar
Version Order number Comparative number
without heating 0174 101 137 WABCO 432 410 113 7
with heating 0174 101 127 WABCO 432 410 112 7

Air dryer
as replacement
suitable for TGM, TGL
Operating pressure max. 13 bar
Thread M39 x 1.5
Replacement for 432 410 020 2
Order number Comparative number
3419 851 271 WABCO 432 410 222 7

182
Pneumatic system

Air dryer
ASP (Air System Protector) 2
suitable for TGM, TGL
Operating pressure max. 13 bar
Thread M39 x 1.5

TGM, TGL
Order number Comparative number
0179 012 232 WABCO 432 901 223 2

Four-circuit protection valve


suitable for TGM, TGL
Connection M22 x 1.5/M16 x 1.5
Operating pressure max. 13 bar
Opening pressure 21,22,24: 6,9-0,3 bar
23: 7,0-0,3 bar
Closing pressure 21-24: >= 5 bar
Order number Comparative number
3807 144 000 WABCO 934 714 400 0

Blowoff valve
in exchange
suitable for TGM, TGL
Operating pressure max. 20 bar
Outlet pressure 8,5 ± 0,3 bar
Setting range 5,8-10,8 bar
Nominal width 10 mm
Connection 1 VOSS plug-type connection 230
Connection M22 x 1,5 VOSS NG
Order number Comparative number
0390 103 007 WABCO 475 010 300 7

Blowoff valve
suitable for TGM, TGL
Operating pressure max. 20 bar
Outlet pressure 9,5 ±0,3 bar
Setting range 9,8-12,5 bar
Nominal width 10 mm
Connection M22 x 1.5
Order number Comparative number
0390 103 330 WABCO 475 010 333 0

www.europart.net 183
Pneumatic system

2 Compressed air tank


EN 286-2, steel
suitable for TGM, TGL
TGM, TGL

Version with bracket


Volume 5l
Diameter 154 mm
Length 341 mm
Connection 3 x M22 x 1.5
Operating pressure 10 bar
Order number
3620 001 545

Compressed air tank


EN 286-2, steel
suitable for TGM, TGL
Connection 4 x M22 x 1.5
Operating pressure max. 15.5 bar
Volume l ∅ mm Length mm Order number
10 206 368 3620 020 610
25 246 599 3620 024 625
30 246 709 3620 024 630

Compressed air tank


to EN 286-2, Aluminium
suitable for TGM, TGL
Connection 2 x M22 x 1.5
Operating pressure max. 12.5 bar

Volume l ∅ mm Length mm Order number


20 246 500 1740 200 024
30 246 720 1742 302 460
40 276 770 1742 402 760

184
Pneumatic system
Air reservoir tensioning strap
with bracket, 1-piece
suitable for TGM, TGL
2
∅ mm Order number
206 1740 012 060
246 1740 022 460

TGM, TGL
276 1740 032 760

Accessories
Description Length mm Material Order number
Tensioning strap base 1000 rubber 9085 413 340

Hand brake valve


suitable for TGM, TGL
Connection M16 x 1,5 VOSS NG8
Operating pressure max. 10 bar

Version Order number Comparative number


without control position and electric switch, 3400 007 092 Knorr DPM92BK
1 circuit operating indirectly
with control position, without electric switch, 3400 090 001 Knorr DPM90BK
2 circuits operating indirectly

EBS central brake unit


suitable for TGM, TGL
Connection thread M16 x 1.5, M22 x 1.5
Operating pressure max. 12.7 bar
Voltage 24 V
Current consumption 0,5-11 A
Order number Comparative number
0360 200 020 (on request) WABCO 480 020 023 0

www.europart.net 185
Pneumatic system

Trailer control valve


2 in exchange
suitable for TGM, TGL
Version lead at 0 bar, adjustable
TGM, TGL

Connection VOSS insert union


Operating pressure max. 8,5 bar
Order number Comparative number
0640 090 065 WABCO 973 009 006 7

EBS trailer control valve


suitable for TGM, TGL
Version connector, horizontal
Operating pressure max. 8.5 bar
Order number Comparative number
0064 060 070 WABCO 480 204 002 0

EBS axle modulator


suitable for TGL
Connection M22 x 1.5
Operating pressure bar Order number Comparative number
max. 12,8 0361 041 060 WABCO 480 104 106 0
max. 15 3800 104 101 WABCO 480 104 107 0

Solenoid valve
3/2 way
suitable for TGM, TGL
Version ventilated
Connection M12 x 1,5, bayonet (DIN)
Nominal width 2,2 mm
Voltage 24 V
Order number Comparative number
0370 726 280 WABCO 472 072 628 0

186
Pneumatic system

Relay valve
suitable for TGM, TGL 2
Thread VOSS 230
Connection electric, bayonet (DIN)
Connection 1-2 M22 x 1,5

TGM, TGL
Connection 3 with muffler
Connection 4 M16 x 1,5
Order number Comparative number
0640 060 037 WABCO 973 006 003 0

Solenoid control valve


for ABS
suitable for TGM, TGL
Voltage 24 V
Connection electric, bayonet (DIN)
Connection thread M22 x 1.5 JED-388
Operating pressure max. 11 bar
Electric current 1,65 A
Protection class IP67
Order number Comparative number
0371 950 087 WABCO 472 195 016 0

Overflow valve
suitable for TGM, TGL
Version with limited return flow
Operating pressure max. 10 bar
Setting range 5,3-7 bar
Connection thread M22 x 1,5
Nominal width 8
Oveflow pressure 6.4 bar
Order number Comparative number
0191 002 280 WABCO 434 100 228 0

ABS mini sensor


S plus Axial Mini
suitable for TGM
Installation location front axle/rear axle
Length 2065 mm
Installation side Order number Comparative number
left 0210 322 830 WABCO 441 032 296 0
right 0210 322 840 WABCO 441 032 297 0

www.europart.net 187
Pneumatic system

Membrane brake cylinder


2 Type 24
suitable for TGM
Version with fork head, with bellows
TGM, TGL

Installation location front axle


Operating pressure 10 bar
Stroke 57 mm
Connection M16 x 1.5
Length of piston rod 37 mm

Order number Comparative number


0131 061 150 WABCO 423 106 115 0

Membrane brake cylinder


Type 24
suitable for TGL
Installation location front axle
Connection M16 x 1,5
Stroke 57 mm
Length of piston rod 15 mm
Application range
vehicles with disc brakes

Installation side Type number Order number Comparative number


left BS3507 3405 350 700 Knorr K018266
right BS3511 3405 351 100 Knorr K018267

Membrane brake cylinder


Type 24
suitable for TGM
Installation location front axle
Connection M22 x 1,5
Stroke 64 mm
Length of piston rod 15 mm
Application range
vehicles with disc brakes

Installation side Type number Order number Comparative number


left BS2514 3450 409 685 Knorr K002843
right BS2515 3450 409 690 Knorr K002844

188
Pneumatic system

Combination brake cylinder


Type 16/16 2
suitable for TGL
Installation location rear axle

TGM, TGL
Connection M22 x 1.5
Stroke 57/57 mm
Length of piston rod 15 mm
Application range
vehicles with disc brake

Installation side Order number Comparative number


left 0554 248 000 WABCO 925 424 800 0
right 0554 248 010 WABCO 925 424 801 0

Combination brake cylinder


in exchange
Type 20/24
suitable for TGM
Installation location rear axle
Connection M22 x 1.5
Stroke 57/57 mm
Length of piston rod 75 mm
Application range
vehicles with S-cam brake

Order number Comparative number


0554 207 507 WABCO 925 420 750 7

Combination brake cylinder


Type 16/16
suitable for TGL
Installation location rear axle
Connection M22 x 1,5, VOSS NG 12
Stroke 57/57 mm
Length of piston rod 15 mm
Application range
vehicles with disc brakes

Installation side Type number Order number Comparative number


left BS9396 3450 408 040 Knorr K007647
right BS9395 3450 408 035 Knorr K007646

www.europart.net 189
Pneumatic system

Combination brake cylinder


2 Type 16/24HFL1
suitable for TGL
Installation location rear axle
TGM, TGL

Connection M22 x 1,5


Stroke 57/57 mm
Length of piston rod 15 mm
Application range
vehicles with disc brakes
Installation side Type number Order number Comparative number
left BS8328 3400 007 655 Knorr K007655
right BS8329 3400 007 656 Knorr K007656

Combination brake cylinder


Type 20/24HFL1
suitable for TGM
Installation location 1st rear axle
Connection M22 x 1,5, VOSS NG12
Stroke 64/64 mm
Length of piston rod 15 mm
Application range
vehicles with disc brakes

Installation side Type number Order number Comparative number


left BS8414 3450 409 700 Knorr K007669
right BS8413 3450 409 695 Knorr K007668

Clutch master cylinder


suitable for TGL
Order number Comparative number
0740 100 060 WABCO 974 010 008 0

Clutch actuator
suitable for TGM, TGL
Version electronic
Operating pressure max. 10 bar
Operating liquid mineral oil
Order number Comparative number
3400 158 740 Knorr K015874N50

190
Pneumatic system

Clutch servo
suitable for TGM, TGL 2
Operating pressure max. 10 bar
Stroke 85 mm
Operating liquid mineral oil

TGM, TGL
Order number Comparative number
0730 514 320 WABCO 970 051 432 0

Pressure switch
for brake hydraulics
suitable for TGM, TGL
Version pneumatic
Connection 3-pole, bayonet
Inner thread M12 x 1.5
Operating pressure max. 10 bar
Voltage 24 V
Order number
9500 495 273

Muffler
attachment with additional clamp
suitable for TGM, TGL
Operating pressure 18,5 bar
Diameter 87 mm
Height 62 mm
Connection Snap contour
Order number Comparative number
0174 070 120 WABCO 432 407 012 0

Working cylinder
for engine brake
suitable for TGM, TGL
Outer thread M8 x 1
External diameter 44 mm
Diameter of hole circle 8,3 mm
Order number
5237 016 124

www.europart.net 191
Pneumatic system
Coupling head
automatic

2 Version with valve


Application range
for tractor truck
TGM, TGL

Description Connection thread Colour Operating pressure bar Order number


brake line M16 x 1.5 yellow 10 3700 000 011
brake line M22 x 1.5 yellow 8 3700 000 013
supply line M16 x 1.5 red 10 3700 000 012
supply line M22 x 1.5 red 8 3700 000 014

Coupling head
automatic
Version supply line
Connection thread 2 x M16 x 1.5
Operating pressure max. 10 bar
Colour red
Order number
3700 000 008

ECAS path sensor


with lever
suitable for TGM, TGL
Connection Bayonet DIN 72585-A1-2.1-Sn/K2
Order number Comparative number
0210 501 230 WABCO 441 050 123 0

ECAS solenoid valve


suitable for TGM, TGL
Installation location rear axle, tag axle
Version with noise reducer, solenoid connection at top
Connection electric, 2 x bayonet (DIN)
Connection thread M22 x 1.5, VOSS 230
Voltage 24 V
Operating pressure max. 5-13 bar
Order number Comparative number
0379 051 110 WABCO 472 905 111 0

192
Pneumatic system

ECAS solenoid valve


suitable for TGM, TGL 2
Installation location rear axle
Version 3 magnets, with silencer
Connection electric, bayonet (DIN)

TGM, TGL
Connection thread M22 x 1.5, Voss 230
Voltage 24 V
Operating pressure max. 5-13 bar
Order number Comparative number
0379 000 530 WABCO 472 900 053 0

ECAS solenoid valve


suitable for TGL
Operating pressure max. 5-13 bar
Voltage 24 V
Order number Comparative number
6001 343 254 WABCO 472 880 001 0

ECAS operating unit


suitable for TGM, TGL
Version control unit for front axle/rear axle
Number of poles 4
Voltage 24 V
Order number Comparative number
0760 561 390 WABCO 446 056 139 0

Accessories
Description Order number
Fastening for ECAS 0760 560 104

www.europart.net 193
Pneumatic system
Assortment case
for VOSS connector system 230, complete

2 Version
42-piece
Order number
0307 001 415
TGM, TGL

Contents
Number Description Dimensions mm Order number
2 Straight connector NG 8, Pipe connector 6 x 1 0307 000 050
2 Straight connector NG 8, Pipe connector 9 x 1,5 0307 000 350
2 Straight connector NG 12, Pipe connector 9 x 1,5 0307 000 180
2 Straight connector NG 12, Pipe connector 12 x 1,5 0307 000 200
1 Straight connector NG 12, Pipe connector 16 x 2 0307 000 060
1 Tee plug connector NG 12, Pipe connector 12 x 1,5 0307 001 960
1 Angled plug NG 8, 90°, Pipe connector 6 x 1 0307 000 070
2 Angled plug NG 8, 90°, Pipe connector 8 x 1 0307 000 340
2 Angled plug NG 12, 90°, Pipe connector 8 x 1 0307 000 220
2 Angled plug NG 12, 90°, Pipe connector 12 x 1,5 0307 000 230
6 Gasket set, for connectors NG 8 9460 002 310
6 Gasket set, for connectors NG 12 9460 002 311
4 Union bolt NG 8, M16 x 1.5 0307 000 030
4 Union bolt NG 12, M22 x 1.5 0307 000 160
1 Threaded compression adapter NG 8, M16 x 1.5 3800 022 601
1 Straight screw-in coupling NG 12, M16 x 1.5 0307 000 300
1 Straight screw-in coupling NG 12, M22 x 1.5 0307 000 240
1 Sealing plug NG 8 0307 001 990
1 Sealing plug NG 12 0307 001 980

194
Pneumatic system
Assortment case
for VOSS connector system 232, complete
Version
381-piece
Order number
0307 000 145
2

TGM, TGL
Contents
Number Description Type Dimensions mm Order number
4 Straight coupling 232 NG 8, Pipe connector 8 x 1 0307 124 325
4 Straight coupling 232 NG 12, Pipe connector 12 x 1,5 0307 124 330
10 Adapter for units with step drilling 230 NG 6 0307 000 194
4 Straight screw-in coupling 232 NG 8, M16 x 1.5 0307 124 220
4 Straight screw-in coupling 232 NG 12, M16 x 1.5 0307 124 290
4 Straight screw-in coupling 232 NG 12, M22 x 1.5 0307 124 310
20 Union bolt 230 NG 6, M10 x 1 0307 003 300
6 Union bolt 230 NG 8, M16 x 1.5 0307 000 030
6 Union bolt 230 NG 12, M22 x 1.5 0307 000 160
12 Union bolt 232 NG 8, M16 x 1.5 0307 124 700
12 Union bolt 232 NG 12, M22 x 1.5 0307 124 695
10 Straight connector 230 NG 6, Pipe connector 6 x 1 0307 003 430
15 Straight connecting plug 232 NG 8, Pipe connector 8 x 1 0307 124 360
5 Straight connecting plug 232 NG 12, Pipe connector 8 x 1 0307 124 395
9 Straight connecting plug 232 NG 12, Pipe connector 12 x 1,5 0307 124 400
10 Sealing plug 232 NG 8 0307 124 755
3 Sealing plug 232 NG 12 0307 124 760
10 Straight quick-fit coupling 230 Pipe diameter 6 0307 003 060
4 Angled plug 230 NG 6, 90°, Pipe connector 6 x 1 0307 000 055
10 Angled plug 232 NG 8, 90°, Pipe connector 8 x 1 0307 124 945
6 Angled plug 232 NG 12, 90°, Pipe connector 8 x 1 0307 124 970
6 Angled plug 232 NG 12, 90°, Pipe connector 12 x 1,5 0307 124 975
2 Tee plug connector 232 NG 12, Pipe connector 12 x 1,5/8 x 1 0307 124 660
1 Tee plug connector 232 NG 12, Pipe connector 12 x 1,5/12 x 1,5 0307 124 680
30 O-ring, Mud ring 232 NG 8, 7.5 x 2 0307 239 961
30 O-ring, Mud ring 232 NG 12, 12 x 2 0307 449 961
30 O-ring, Sealing ring 232 NG 8, 7 x 1.5 5239 390 055
30 O-ring, Sealing ring 232 NG 12, 12 x 1.6 0307 089 971
30 O-ring, Mud ring 230 NG 6, 5.5 x 1.5 0307 159 972
30 O-ring, Sealing ring 230 NG 6, 3.5 x 1.5 0307 149 971
20 Spring element 230 NG 6, 6.5 0307 062 179
6 Spring element 230 NG 8, 9.7 0307 000 040
6 Spring element 230 NG 12, 15.2 0307 000 170
20 Clamp 230 NG 6, 7.4 0307 016 900
6 Clamp 230 NG 8, 11.6 0307 000 020
6 Clamp for 6 tube 230 NG 12, 17.6 0307 000 150

www.europart.net 195
Lighting and electrics
H7 main headlamp
suitable for TGM, TGL
Version with high beam and side light
2 Installation location front
Voltage 24 V
Scope of supply
TGM, TGL

with rubber gasket

Installation side Application Order number


left for vehicles without headlight levelling 5231 016 419
right for vehicles without headlight levelling 5231 016 348
left for vehicles with headlight levelling 9500 449 110
right for vehicles with headlight levelling 9500 449 111

Service parts
Description Order number
Side light/indicator lens, left 5230 331 023
Side light/indicator lens, right 5230 331 024
Seal, left (on request) 5231 110 050
Seal, right (on request) 5231 110 051
Seal, left/right 5232 511 105
H7 halogen headlamp bulb, PX 26 d, 70 W 8900 001 030
Glass-base bulb, 24 V, 5 W 8900 040 130

H7 main headlamp
suitable for TGM, TGL
Version with high beam and side light
Installation location front
Voltage 24 V
Scope of supply
without rubber seal
Installation side Application Order number
left for vehicles without headlight levelling 5230 240 118
right for vehicles without headlight levelling 5230 240 117
right for vehicles with headlight levelling 5231 016 466
left for vehicles with headlight levelling 5231 016 467

Service parts
Description Order number
Side light/indicator lens, left 5230 331 023
Side light/indicator lens, right 5230 331 024
Seal, left (on request) 5231 110 050
Seal, right (on request) 5231 110 051
H7 halogen headlamp bulb, PX 26 d, 70 W 8900 001 030
Glass-base bulb, 24 V, 5 W 8900 040 130

Headlamp adjustment equipment available from EUROPART!

196
Lighting and electrics
Additional headlamp
with indicator lights
suitable for
Version
TGM, TGL
with high beam and fog lamp
2
Installation location front
Width 395 mm

TGM, TGL
Height 95 mm
Depth 175 mm
Bulb type H4/P21W
Voltage 24 V
Type flush-mounting
Colour yellow
Installation side Order number
left 9190 222 791
right 9190 222 792

Service parts
Description Order number
H4 halogen headlamp bulb, P 43 t, 75/70 W 8900 006 000
H7 halogen headlamp bulb, PX 26 d, 70 W 8900 001 030
Bulb, Drop-shaped, 24 V, 21 W 8900 003 000
Bulb, 24 V, 21 W, yellow 9560 013 496

Additional headlamp
with indicator lights
suitable for TGM, TGL
Version with high beam and fog lamp
Installation location front
Width 395 mm
Height 95 mm
Depth 175 mm
Voltage 24 V
Type flush-mounting
Colour white
Application range
for truck with steel bumper
Installation side Order number
left 5233 206 113
right 5233 206 114

Service parts
Description Order number
H4 halogen headlamp bulb, P 43 t, 75/70 W 8900 006 000
H7 halogen headlamp bulb, PX 26 d, 70 W 8900 001 030
Bulb, Drop-shaped, 24 V, 21 W 8900 003 000
Bulb, 24 V, 21 W, yellow 9560 013 496

www.europart.net 197
Lighting and electrics
Indicator light
suitable for TGM, TGL
Version without high beam and fog light, with trim
2 Installation location front
Width 395 mm
Height 95 mm
TGM, TGL

Depth 175 mm
Bulb type P21W
Voltage 24 V
Type flush-mounting
Colour yellow
Installation side Order number
left 5233 206 089
right 5233 206 090

Service parts
Description Order number
H4 halogen headlamp bulb, P 43 t, 75/70 W 8900 006 000
H7 halogen headlamp bulb, PX 26 d, 70 W 8900 001 030
Bulb, Drop-shaped, 24 V, 21 W 8900 003 000
Bulb, 24 V, 21 W, yellow 9560 013 496

Indicator light
suitable for TGM, TGL
Installation location at the side
Installation side left/right
External diameter 75 mm
Depth 52,5 mm
Bulb type PY21W
Voltage 24 V
Colour yellow
Order number
1325 331 052

Service parts
Description Order number
Bulb, 24 V, 21 W 8900 003 000

Indicator light
suitable for TGM, TGL
Installation location front, bottom
Installation side left/right
External diameter 122.5 mm
Depth 52,5 mm
Voltage 24 V
Colour white
Order number
5233 206 106

Service parts
Description Order number
Bulb, 24 V, 21 W, yellow 9560 013 496

198
Lighting and electrics
Indicator light
suitable for TGM, TGL
Installation location front, bottom
Installation side left/right 2
Width 105 mm
Height 70 mm

TGM, TGL
Depth 65 mm
Voltage 24 V
Cable length 240 m
Colour yellow
Order number
4013 206 102

Service parts
Description Order number
Bulb, 24 V, 21 W 8900 003 000

LED side marker light


suitable for TGM, TGL
Version with reflector
Installation side left/right
Width 60 mm
Height 60 mm
Depth 25 mm
Voltage 24 V
Fastening 2-hole, 6 mm
Cable length 1250 mm
Scope of supply
with cable
approved for vehicles in accordance with GGVS/ADR
Order number
5233 311 120

Service parts
Description Order number
Spring nut 5238 200 340

www.europart.net 199
Lighting and electrics

2 Clearance light
suitable for TGL
Version lens black to the front, red to the rear
TGM, TGL

Installation location at the side


Installation side left/right
Width 42 mm
Height 92 mm
Depth 37 mm
Socket BA 9s/T4W
Voltage 12/24 V
Fastening 2 x M3,5
Type surface-mounting
Colour black/red
Scope of supply
with bulb holder
approved for vehicles in accordance with GGVS/ADR
Order number
0005 020 041

Service parts
Description Order number
Lens, left/right, black/red 0132 215 011

Clearance light
suitable for TGM, TGL
Version with side marker, clearance, end-outline marker lamps and
reflector
Installation side left/right
Width 125 mm
Voltage 12/24 V
Fastening Height mm Order number
2 x M5, spacing 30 mm 30 9199 820 425
with bracket 40 9500 992 966

Service parts
Description Order number
Bulb, 24 V, 5 W 8900 040 130

200
Lighting and electrics
Position light
suitable for TGM, TGL
Installation location front, top
Installation side left/right 2
Width 108 mm
Height 33 mm

TGM, TGL
Depth 25 mm
Voltage 24 V
Colour clear
Order number
1325 006 099

Service parts
Description Order number
Attachment frame for sheet metal roof (on request) 5230 450 147
Attachment frame for high roof (on request) 5232 450 148
Attachment frame with hole (on request) 5232 450 161
Glass-base bulb, 24 V, 5 W 8900 040 130

Rear light
with external side marker light
suitable for TGM, TGL
Version with indicator, stop, rear fog, reversing, side marker, tail and clearance
light, reflector on side
Width 340 mm
Height 130 mm
Depth 86 mm
Bulb type P21W, R5W, W5W/24W
Voltage 24 V
Fastening 2 x M8, bolt spacing 152 mm
with connection plug at bottom
approved for vehicles in accordance with GGVS/ADR
Installation side Version Order number
left with licence plate light 9194 651 209
right without licence plate light 9194 651 108

Service parts
Description Order number
Lens, left/right 8840 203 126
Clearance light, 12/24 V 9199 820 425
Bulb, Drop-shaped, 24 V, 21 W 8900 003 000
Bulb, spherical, 24 V, 5 W 8900 001 000
Glass-base bulb, 24 V, 5 W 8900 040 130
Repair kit for connector 8840 203 024

www.europart.net 201
Lighting and electrics

Rear light
2 suitable for TGM, TGL
Width 400 mm
Height 160 mm
TGM, TGL

Depth 88.5 mm
Bulb type P21W/PY21W/R5W
Voltage 24 V
Fastening 2 x M8, bolt spacing 152 mm
with side connection plug AMP 1.5
approved for vehicles in accordance with GGVS/ADR
Installation side Version Order number
left indicator, stop, clearance, licence plate, rear fog, tail, reversing and side marker 6211 562 000
light, with reflector
right with indicator, stop, clearance, rear fog, tail, reversing and side marker light, 6211 562 100
reflector
right with indicator, stop, rebound, rear fog, reversing, side marker and tail light, 6211 562 200
with reflector on side, with reversing alarm

Service parts
Installation side Order number
Lens, left 6210 565 000
Lens, right 6210 565 100
Repair kit for rear lights 8850 071 100
Bulb, Drop-shaped, 24 V, 21 W 8900 003 000
Bulb, spherical, 24 V, 5 W 8900 001 000
Bulb, 24 V, 21 W, yellow 9560 013 496

Numberplate lamp
suitable for TGL
Installation side left/right
Width 102 mm
Height 55 mm
Depth 57 mm
Bulb type P21W
Voltage 24 V
Housing colour black
Type Mounting/PG fitting
Scope of supply
with bulb holder
Order number
0003 389 081

Service parts
Description Order number
Housing, left/right 0121 587 031
Bulb, spherical, 24 V, 10 W, BA 15 s 8900 002 000

202
“V top drivers: Roll up!”
EUROPART is already there.

We are “all fired up” and support


this initiative:
1. We want to help to improve the social
standing of the driver.
2. We want to stimulate the knowledge and
sense of responsibility of the driver.
3. We want to optimise understanding of the
needs of the driver in all levels of society.
4. We want to join in helping to make road
traffic safer and more harmonious for all
those involved.

Reason – Understanding – Example:


The trademarks of the Vtop drivers.

An initiative of the long-distance truck driver magazine FERNFAHRER and the


lighting specialist Hella.

More information from:

www.europart.net www.v-top.de
Lighting and electrics

2 LED daytime running lamp


5 LEDs per light
Version With position light, daytime running light
TGM, TGL

Width 216 mm
Height 35.9 mm
Voltage 24 V
Test mark E1 2578
Type flush-mounting
Colour clear
Installation side Order number
left 0010 043 031
right 0010 043 041

LED daytime running lights set


Three high-power LEDs per light ensure the vehicle is seen easily during daylight
hours, too, and contribute towards significantly improving road safety, minimum power
consumption thanks to the latest LED technology, light is automatically activated when
the engine is started up, the electronics and relay switching are integrated in the
daytime running light
Installation side left/right
Voltage 9-33 V
Width 169.3 mm
Height 52.3 mm
Depth 63,8 mm
Test mark E1 2344
Colour clear
Scope of supply
2 LED daytime running lights, connection cable set and installation instructions
Order number
0009 496 801

Indicator switch
suitable for TGM, TGL
Version for wipers, washers, light, indicators and horn
Installation side left
Connection Harness
Cable length 260 mm
Voltage 24 V
Order number
9790 000 033

204
Lighting and electrics
Starter Motor
in exchange
suitable for
Number of teeth
TGM, TGL
10
2
Voltage 24 V
Power 4 kW

TGM, TGL
Order number
5240 860 814

Alternator
suitable for TGM, TGL
Voltage 28 V
Charging current 110 A
Version without belt pulley
Order number
7063 000 014

Compressor cooling unit


for retrofitting to the extendable storage box
fully hermetic Danfoss BD35F compressor with integrated control electronics,
undervoltage protection can be set for consumer or starter battery, electronic fuse,
automatic protection against polarity inversion, dynamically ventilated wire pipe
condenser, aluminium conveyer evaporator, infinitely variable thermostat
suitable for TGM, TGL
Power consumption 35 W
Voltage 12/24 Volt DC
Order number
9710 004 712

www.europart.net 205
Bodywork
Front flap
suitable for TGM, TGL
Driver cab C/L/LX/DK
2 Version narrow
Order number
(on request) 5230 293 673
TGM, TGL

Accessories
Description Order number
Front grille 5230 293 750

4 3

Bumper
suitable for TGM, TGL
Driver cab C
Material Plastic
Colour grey
Illustration Order number
1 9196 100 352

Accessories
Illustration Description Installation location Order number
2 Cover front, centre 5230 280 167
3 Cover trim left 9190 100 333
4 Cover trim right 9190 100 334
5 Step-up bottom 5230 279 969
- Cover left/right 9190 850 059
- Pressure ring 5230 280 796

206
Bodywork

TGM, TGL
2
5 3 4

Bumper
suitable for TGM, TGL
Driver cab L/LX/DK
Material Plastic
Colour grey
Illustration Order number
1 1325 380 171

Accessories
Illustration Description Installation location Order number
2 Cover trim left 9190 100 373
3 Cover trim right 9190 100 374
4 Bumper trim left *5230 280 220
5 Bumper trim right *5230 280 221
- Cover, left/right for headlight cleaning system 9190 850 059
- Cover front, centre 5230 280 167
6 Step-up bottom 5230 279 969
- Pressure ring 5230 280 796
*on request

Our network – 200 locations


in 28 countries
EUROPART – the international
partner for the workshop

www.europart.net

www.europart.net 207
Bodywork
Entry box
with wing

2 suitable for
Driver cab
TGM, TGL
C
Installation location front
Colour grey
TGM, TGL

Installation side Order number


left 5230 295 013
right 5230 295 012

Entry box
with wing
suitable for TGM, TGL
Driver cab L/LX/DK
Installation location front
Colour grey
Installation side Order number
left 5230 295 078
right 5230 295 077

Entry box
with wing
suitable for TGM, TGL
Driver cab L/LX/DK
Installation location front
Colour grey
Installation side Order number
left 5230 295 015
right 5230 295 014

Entry box
suitable for TGM, TGL
Driver cab C/L/LX
Installation location front, bottom
Colour grey
Installation side Order number
left (on request) 5230 295 081
right (on request) 5230 295 079

208
Bodywork
Step-up
for entry step
Installation side left/right
2
Illustration Installation location Driver cab Order number
1 1 centre C/L/LX/DK 5235 110 001
2 bottom C/L/LX 9190 105 187

TGM, TGL
2

Wing extension
suitable for TGM, TGL
Driver cab L/LX
Version long
Colour grey
Installation side Order number
left 5230 293 885
right 5230 293 884

Wing extension
suitable for TGM, TGL
Driver cab L/LX
Version long
Colour grey
Installation side Order number
left 5230 293 881
right 5230 293 880

Wing extension
suitable for TGM, TGL
Driver cab C
Version short
Colour grey
Installation side Order number
left 5230 293 938
right 5230 293 937

www.europart.net 209
Bodywork
Wing extension
suitable for TGM
Driver cab C/L/LX
2 Installation location front
Colour black
Installation side Order number
TGM, TGL

left (on request) 5230 293 973


right (on request) 5230 293 972

Wing extension
suitable for TGM
Driver cab C/L/LX
Installation location rear
Colour black
Installation side Order number
left (on request) 5230 293 969
right (on request) 5230 293 968

Wind deflector
suitable for TGM, TGL
Driver cab C/L/LX
Installation location outside
Colour white, primed
Installation side Order number
left 9190 100 089
right 9190 100 090

Wind deflector
suitable for TGM, TGL
Driver cab C/L/LX
Installation location outside
Colour white, primed
Installation side Order number
left 9199 700 049
right 9199 700 048

210
Bodywork
Air deflector
suitable for TGM, TGL
Driver cab C/L/LX
Installation location inside 2
Colour white, primed
Installation side Order number

TGM, TGL
left 5230 299 437
right 5230 299 436

Pan
for deflector
suitable for TGM, TGL
Driver cab C/L/LX
Installation side Order number
left 5234 400 049
right 5230 299 730

Door handle
with key
suitable for TGM, TGL
Driver cab L/LX
Installation side left
Order number
5230 300 336

Wing
suitable for TGL
Driver cab L/LX
Installation location front axle, rear
Installation side left/right
Colour grey
Order number
(on request) 5230 293 967

www.europart.net 211
Bodywork
Wing
suitable for TGL
Driver cab C
2 Installation location front axle, rear
Installation side Order number
right 5234 100 176
TGM, TGL

left 5234 100 177

Wing
suitable for TGM
Installation location rear axle
Installation side left/right
Order number
(on request) 5234 106 699

Wing
suitable for TGL
Installation location rear axle
Width 600 mm
Installation side Order number
right (on request) 5230 304 140
left (on request) 5234 100 467

Wing
suitable for TGL
Installation location rear axle
Installation side left/right
Width 569 mm
Order number
(on request) 5230 304 134

212
Bodywork

TGM, TGL
1 2

Wing
suitable for TGM
Installation location Rear axle
Installation side left, right
Width 690 mm
Illustration Version Order number
1 front part, partially also rear part, then with spray suppressor 9190 106 599
2 centre section, Length 920 mm, Height 185 mm, Clamping width 1000 mm 5234 106 606

Accessories
Description Order number
Tightening strap rubber, left/right 9090 700 002

Roof spoiler
for driver's cab
suitable for TGM, TGL
Driver cab LX
Version 550-800 mm height adjustable
Fastening original thread points in cab roof
Colour pure white
Scope of supply
Mounting material
Order number
9192 300 203

Roof spoiler
for driver's cab
suitable for TGM, TGL
Driver cab L
Version 550-800 mm height adjustable
Fastening original thread points in cab roof
Colour pure white
Scope of supply
Mounting material
Order number
9192 300 204

www.europart.net 213
Driver's cab
Sunshade
suitable for TGL
Driver cab LX
2 Version for high roof
Scope of supply
complete
TGM, TGL

Order number
9190 430 240

Sunshade
suitable for TGL
Driver cab C
Version for short cab
Scope of supply
complete
Order number
9190 430 230

Side window wind deflector


made of smoke-coloured plexiglass, no draught, less window soiling
suitable for TGL
Version screw attachment
Order number
9192 046 040

Wiper blade
suitable for TGM, TGL
Version with 4 adapters
Length 700 mm
Order number
7257 002 110

214
Driver's cab
Wiper blade
suitable for TGM, TGL
Version with nozzle
Length 700 mm 2
Order number
3600 004 080

TGM, TGL
Washer fluid pump
suitable for TGM, TGL
Version dual outlet pump, electric
Voltage 24 V
Order number
5234 856 032

Wiper motor
suitable for TGM, TGL
Version interference suppressed
Voltage 24 V
Order number
5234 016 140

(Illustration similar)

Wiper rods
suitable for TGL
Order number
5828 820 111

www.europart.net 215
Driver's cab

2 Main mirror
suitable for TGM, TGL
Curve radius 1800 mm
TGM, TGL

Scope of supply
with cover

Installation side Version Dimensions mm Order number


left heated, electric adjustment 399 x 207 x 137 9113 921 222
right heated, electric adjustment 399 x 222 x 138 9113 922 222
right heated, electric adjustment, Memory Function 399 x 222 x 138 9113 922 232

Service parts
Description Installation side Order number
Glass unit left 9113 921 870
Glass unit right 9113 922 870
Cover left 9113 921 110
Cover right 9113 921 120

Accessories
Description Order number
Clamping piece, for vehicles up to 11/06 year of manufacture 9113 920 300
Screw, Diameter 6 mm 9110 603 004

Main mirror
suitable for TGM, TGL
Version heated, electric adjustment
Curve radius 1200 mm
Scope of supply
with cover

mirror complies with ordinance 2003/97/EU or 2007/38/EU


Installation side Dimensions mm Design Order number
left 399 x 207 x 137 a 9113 921 224
right 399 x 222 x 138 a 9113 922 224
left 399 x 207 x 137 b 9113 921 223
right 399 x 222 x 138 b 9113 922 223

Service parts
Description Installation side Order number
Glass unit left/right 9113 920 840
Cover left 9113 921 110
Cover right 9113 921 120

Accessories
Description Order number
Clamping piece, for vehicles up to 11/06 year of manufacture 9113 920 300
Clamping piece, for vehicles from 12/06 year of manufacture 9113 921 300
Screw, Diameter 6 mm 9110 603 004

216
Driver's cab

Main mirror 2
suitable for TGM, TGL
Version heated, electric adjustment, Memory Function

TGM, TGL
Curve radius 1200 mm
Scope of supply
with cover

mirror complies with ordinance 2003/97/EU or 2007/38/EU


Installation side Dimensions mm Order number
right 399 x 222 x 138 9113 922 233

Service parts
Description Installation side Order number
Glass unit left/right 9113 920 840
Cover left 9113 921 110
Cover right 9113 921 120

Accessories
Description Order number
Clamping piece 9113 920 300
Screw, Diameter 6 mm 9110 603 004

Main mirror
suitable for TGM, TGL
Version unheated, manual adjustment
Installation side left/right
Length 426 mm
Width 200 mm
Depth 135 mm
Curve radius 1200 mm
for mirror mounting bracket diameter 22/28 mm
mirror complies with ordinance 2003/97/EU or 2007/38/EU
Order number
9111 036 848

Service parts
Description Installation side Order number
Mirror glass left/right 9115 725 212

www.europart.net 217
Driver's cab

2 Main mirror
suitable for TGM, TGL
Length 426 mm
TGM, TGL

Width 200 mm
Depth 135 mm
Curve radius 1200 mm

mirror complies with ordinance 2003/97/EU or 2007/38/EU


Installation side Version Order number
left/right heated, manual adjustment 9115 720 140
left heated, electric adjustment 9110 721 160
right heated, electric adjustment 9115 722 160

Service parts
Description Installation side Order number
Mirror glass left/right 9115 725 412

Front mirror
suitable for TGM, TGL
Version manual adjustment
Installation side right
Application Left-hand drive
Length 520 mm
Width 259 mm
Depth 92 mm
Curve radius 240 mm
Scope of supply
with rod
mirror complies with ordinance 2003/97/EU or 2007/38/EU
Order number
9113 894 241

Service parts
Description Installation side Order number
Front mirror, without rod left/right 9113 894 140

Front mirror
with mirror holder
suitable for TGM, TGL
Order number
3002 430 887

218
Driver's cab

Wide angle mirror 2


suitable for TGM, TGL
Installation side left/right

TGM, TGL
Length 202 mm
Width 198 mm
Depth 126 mm
Curve radius 300 mm
for mirror mounting bracket diameter 22/28 mm

mirror complies with ordinance 2003/97/EU or 2007/38/EU


Version Order number
unheated, manual adjustment 9115 730 120
heated, manual adjustment 9115 730 140

Service parts
Description Order number
Mirror glass, unheated 9115 735 203
Mirror glass, heated 9115 735 403

Wide angle mirror


suitable for TGM, TGL
Curve radius 300 mm
Scope of supply
with cover

mirror complies with ordinance 2003/97/EU or 2007/38/EU


Installation side Design Version Dimensions mm Order number
left a heated, manual adjustment 188 x 207 x 129 9111 037 033
right a heated, manual adjustment 188 x 220 x 130 9113 932 343
left b heated, electric adjustment 188 x 207 x 129 9113 931 323
right b heated, electric adjustment 188 x 220 x 130 9113 932 323

Service parts
Description Installation side Order number
Glass unit left/right 9113 932 870
Cover left 9113 931 110
Cover right 9113 931 120

Accessories
Description Order number
Clamping piece, for vehicles up to 11/06 year of manufacture 9113 920 300
Clamping piece, for vehicles from 12/06 year of manufacture 9113 921 300
Screw, Diameter 6 mm 9110 603 004

www.europart.net 219
Driver's cab

2 Ramp mirror
suitable for TGM, TGL
Installation side left/right
TGM, TGL

Length 303 mm
Width 163 mm
Depth 88 mm
Curve radius 300 mm

Version Order number


unheated, manual adjustment 9110 221 752
heated, electric adjustment, 24 V 9110 221 753

Service parts
Description Order number
Glass unit, heated 9111 570 099
Glass unit, unheated 9115 791 470

Heat exchanger
for interior heating
suitable for TGM, TGL
Length 370 mm
Width 190 mm
Height 43 mm
Order number
9100 269 002

Air-conditioning compressor
suitable for TGM, TGL
Pulley diameter 119 mm
Number of ribs 8
Voltage 24 V
Order number
0351 135 231

220
Driver's cab

Condenser 2
for air-conditioning systems
suitable for TGM, TGL

TGM, TGL
Version with dryer
Length 590 mm
Width 479 mm
Depth 16 mm
Order number
0351 029 371

Filter dryer
for air-conditioning systems
suitable for TGM, TGL
Length 405 mm
Diameter 45 mm
Order number
0351 197 481

Evaporator
for air-conditioning system
suitable for TGM, TGL
Version with expansion valve
Length x Width x Depth mm Order number
385 x 203 x 67 9100 820 221
307 x 200 x 65 (on request) 0351 336 111

Expansion valve
for air-conditioning system
suitable for TGM, TGL
Order number
0351 239 381

www.europart.net 221
Driver's cab

2 Blower
with integrated controller
suitable for TGM, TGL
TGM, TGL

Power 300 W
Voltage 24 V
Order number
0009 158 151

Coolant control valve


suitable for TGM, TGL
Voltage 24 V
Order number
9100 903 100

Resistor
for interior blower
suitable for TGM, TGL
Version 4-pin
Voltage 24 V
Order number
0351 029 061

Cabin filter
suitable for TGM, TGL
Version Order number Comparative number
(Illustration similar) Activated charcoal filter 9020 479 500 MANN CUK 4795
Pollen filter 9020 047 950 MANN CU 4795

222
Driver's cab

TGM, TGL
Roof-mounted air-conditioning system for truck
CoolAir RT 880, for stationary operation
extraordinary cooling performance and additional air dehumidification, pleasant climate, independently of the external climatic
conditions, working while the engine is switched off, simple installation
Refrigerant R134a
Cooling capacity 1000 W (compressor capacity), 850 W (based on ISO 5151)
Dimensions of roof unit (W x H x D) 830 x 160 x 635 mm
Version Base model, 0° compressor tilt
Input voltage 24 V DC
Current consumption 12-22 A
Colour white
Scope of supply
remote control, connection cable, operating instructions
Order number
1880 000 044

Accessories
Description Order number
Assembly set universal, for vehicles with roof hatch, with screw fastening 1880 000 038
Protective hood CoolAir 1880 000 040

Professional vehicle
diagnosis
Across-brand diagnostic tools for tractor
vehicles, trailers, semi-trailers, buses
and vans
www.europart.net

www.europart.net 223
Driver's cab

2
TGM, TGL

Truck split air conditioning


CoolAir SP-950, for roof and rear panel mounting
high-quality design, roof unit only 58 mm high, can be switched in during the journey to support the existing factory-fitted air
conditioning system, the casings can be painted later
Refrigerant R134a
Cooling capacity 1000 Watts (compressor capacity), 850 Watts (following ISO 5151)
dimensions of condenser unit: 346 x 485 x 156 mm, weight approx. 16 kg
dimensions of evaporator unit: 778 x 58 x 577 mm, weight approx. 12 kg
Input voltage 24 V DC
Current consumption 12-22 A
Colour white
Scope of supply
condenser unit, roof evaporator unit, remote control, connection cable, mounting materials, installation and operating instructions
Order number
1880 100 029

Accessories
Description Order number
Assembly set universal, for vehicles with roof hatch, with screw fastening 1880 000 038

Booster heating
Airtronic D2
Type 2200 W
Voltage 24 V
Order number
9192 116 050

224
Driver's cab

Truck driver's seat 2


6860/875 NTS
automatic weight adjustment with connection to the vehicle pneumatic system, with

TGM, TGL
pressure permanently at least 7.5 bar, built-in 3-point safety belt system, adjustable
upper belt diverter, height adjustment with memory function, seat back adjustment,
shoulder adjustment, lean and horizontal settings, adjustable vertical movement
damper, on/off horizontal springing, adjustable seat cushion depth, integrated
pneumatic system (IPS) for adjustment of backrest to individual body contour (lumbar
support and adjustable side support), rapid lowering, grey/anthracite seat covering with
fine silver coloured stripes
suitable for TGM, TGL
Suspension pneumatic
It is not permitted to use this item in vehicles with air bag systems, seat belt
pretensioners and belt lock sensors!
Arm rests must be ordered separately.
Version Order number
Standard, can be operated on the left 9368 970 501
Comfort, can be operated from the left, with seat climate control 9368 971 501
(Illustration similar)
Accessories
Description Order number
Arm rest, left, Standard 9369 296 511
Arm rest, right, Standard 9369 296 521
Arm rest, left, Luxury with textile cover 9360 707 413
Arm rest, right, Luxury with textile cover 9360 707 313

Truck driver's seat


Kingman High Performance Standard, without belt pretensioner
air sprung, with external supply, spring deflection 70 mm, height adjustment 100 mm,
built-in headrest, length adjustment, longitudinal horizontal suspension, pneumatic
lumbar support, backrest setting, built-in 3-point restraint system, quick lowering, side
contour adjustment, seat angle adjustment, adjustable shock absorber
suitable for TGM, TGL
Version Standard
Illustration shows special equipment!
Order number
9361 503 120

Accessories
Description Order number
Arm rest, left 9361 029 136
Arm rest, right 9361 029 137

www.europart.net 225
Driver's cab

2 Truck driver's seat


Kingman High Performance Comfort
spring deflection 70 mm, height adjustment 100 mm, integrated head rest, length
TGM, TGL

adjustment, longitudinal horizontal suspension, pneumatic lumbar support, neck pillow


with exchangeable cover, backrest setting, integrated 3-point restraint system with
adjustable belt tongue, tapered back contour, quick lowering, side contour adjustment,
2-level seat heating, seat cushion depth setting, seat angle setting, adjustable shock
absorbers
suitable for TGM, TGL
Suspension pneumatic
For vehicles without an airbag!
Order number
9361 503 130

Accessories
Description Order number
Arm rest, left 9361 029 136
Arm rest, right 9361 029 137

(Illustration similar)

Seat covering
suitable for TGM, TGL
Colour antracite
Material Velour
Version with extended back section, belt slot and Velcro™ fastening
Installation side Order number
left 9193 031 071
right 9193 031 072

Seat covering
suitable for TGM, TGL
Colour black
Material Velours
Version with extended back section, belt slot and Velcro fastening
Installation side Order number
left 9190 772 045
right 9190 772 046

226
Driver's cab
Floor mat set
suitable for TGL
Version 2-part, front, left/right, with cut-out
Material rubber 2
Colour black
Order number

TGM, TGL
9190 140 060

Pedal pad
for brake and clutch pedal
suitable for TGM, TGL
Material rubber
Order number
9080 001 113

Filing table
with anti-slip mat
suitable for TGL
Installation side centre
Material poplar laminated wood
Colour black
Order number
9199 210 601

Filing table
with anti-slip mat
suitable for TGL
Version with on-board unit cut-out
Installation side centre
Material poplar laminated wood
Colour black
Order number
9199 210 613

Filing table
with anti-slip mat
suitable for TGL
Installation side right
Material poplar laminated wood
Colour black
Order number
9080 084 807

www.europart.net 227
Driver's cab

2 Shock absorber
Version gas pressure, twin-tube system
Fastening eye/eye
TGM, TGL

Installation location driver's cab

suitable for Order number Comparative number


TGM 9200 226 028 Sachs 313 018
TGM, TGL 9200 313 017 (on request) Sachs 313 017
TGM, TGL 2300 135 200 Sachs 313 184

Shock absorber
CALM II
suitable for TGM, TGL
Version gas pressure, twin-tube system
Fastening eye/eye
Installation location driver's cab
Order number Comparative number
3800 060 220 WABCO 964 006 022 0

Gas spring
for equipment compartment hatch
suitable for TGM, TGL
Spring force 50 N
Length 485 mm
Order number
9279 147 000

Gas spring
for seat adjustment
suitable for TGM, TGL
Spring force 50 N
Order number
5230 366 042

(Illustration similar)

228
Driver's cab
Gas spring
for front flap
suitable for
Spring force
TGM, TGL
160 N
2
Length 585 mm
Spring force N Length mm Order number

TGM, TGL
160 585 5230 331 515
150 785 5230 284 500

Driver cab tilting pump


suitable for TGM
Order number
5237 236 020

Everything your engine


loves!
Spare parts documentation for more
than 550 engine variants from the
manufacturers:
 DAF
 MAN
 MERCEDES-BENZ
 SCANIA
 VOLVO
... and much more besides!

Request your free catalogue copy!

www.europart.net 229
Truck styling
Skirting protection bracket
with TÜV certificate
suitable for TGL
2 Driver cab C
Diameter 76 mm
Material V2A stainless steel
TGM, TGL

Surface high-gloss polished


Order number
1002 021 308

Skirting protection bracket


with TÜV certificate
suitable for TGL
Driver cab L/LX
Diameter 76 mm
Material V2A stainless steel
Surface high-gloss polished
Order number
1002 021 307

Headlight bracket
secured by clamps at original points
suitable for TGL
Driver cab LX
Version for 4 headlamps
Installation location top
Diameter 60 mm
Material V2A stainless steel
Surface high-gloss polished
Scope of supply
without headlamp
Order number
9156 503 017

Headlight bracket
with welded-on lugs for bolting on
suitable for TGL
Driver cab C
Version for 4 headlamps
Installation location top
Diameter 60 mm
Material V2A stainless steel
Surface high-gloss polished
Scope of supply
without headlamp
Application range
flat roof with glare shield
Order number
1002 003 049

230
Truck styling
Headlight bracket
installation without removing ceiling panel
suitable for TGL
Driver cab L 2
Version for 4 headlamps
Installation location top

TGM, TGL
Diameter 60 mm
Material V2A stainless steel
Surface high-gloss polished
Scope of supply
without headlamp
Order number
8520 165 031

H1 spotlight
Rallye 3003
Version Halogen, with LED position light
Installation side left, right
Colour clear
Voltage 12/24 V
Scope of supply
with LEDs
Order number
0009 797 431

H1 spotlight
Luminator-Chromium CELIS®
Version Halogen, with CELIS® position light
Installation side left/right
Colour clear
Voltage 12/24 V
Order number
0007 560 211

Fastening clamp
for headlight
for mounting on the impact protection of light bar
Material Stainless steel
∅ mm Order number
60 9150 001 430
76 1002 001 431

www.europart.net 231
Technical equipment
and accessories
3

232
Attachments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234-237 3
Universal truck styling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 238-244
On-board equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245-248
Starter batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 249, 250
Bulbs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252-254
Worklights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 255-259
Rotating beacons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260-262
Warning markers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263-266
Emergency equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 267-269
Special tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270-275
Diagnosis, maintenance and repair devices . . . . . . . . . . . . . . . . . . . . . . 276-289
Chemical products. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 290-299

www.europart.net 233
Attachments

Fifth wheel
with extended handle and rubber joint bearing
Fastener 2"
Vertical load on the fifth wheel 20 t
D-value 152 kN

3 Type Height mm Order number


JSK 37 C150 ZJ 150 3001 008 180
JSK 37 C185 ZJ 185 3001 008 186
Technical equipment and accessories

Service parts
Description Order number
Repair kit for lock 3050 322 151
Repair kit for mounting 3050 212 160

Fifth wheel
with sliding discs and LubeTronic
Fastener 2"
Vertical load on the fifth wheel 20 t
D-value 152 kN
Type Height mm Order number
JSK 37 C0 20 87 AA 150 3001 372 087
JSK 37 C0 38 87 AA 185 3001 373 887

Service parts
Description Order number
Repair kit for lock 3050 312 160
Repair kit for mounting 3050 212 160
Slide pad set 3053 106 003

Fifth wheel
with plain bearings
Fastener 2"
Vertical load on the fifth wheel 20 t
D-value 152 kN

Type Height mm Order number


JSK 42 K0 20 35 AA 150 3001 008 385
JSK 42 K0 38 35 AA 185 3001 008 387

Service parts
Description Order number
Repair kit for lock 3001 100 619
Repair kit for mounting 3001 370 220

234
Attachments

Fifth wheel
with sliding discs and LubeTronic
Fastener 2"
Vertical load on the fifth wheel 20 t
D-value 152 kN

3
Type Height mm Order number
JSK 42 K0 20 87 AA 150 3001 422 087
JSK 42 K0 38 87 AA 185 3001 008 409
Technical equipment and accessories

Service parts
Description Order number
Repair kit for lock 3001 100 619
Repair kit for mounting 3001 370 220
Slide pad set 3001 100 702

High performance grease


for the Jost LubeTronic 5Point central lubrication system for fifth wheel
couplings
Contents Container Order number
2 x 400 ml Cartridge *3001 670 000
25 kg Barrel 3001 090 000
*Grease supply sufficient for about 1 year

LubeTronic 5Point - installed as standard in MAN tractor vehicles since 2011

The use of any other kind of grease will cause invalidation of the warranty.

Trailer hitch
automatic
for heavy central axle trailers with trailer coupling rings 50, EEC type-approved
according to Class C 50-X, in line with guideline 94/20 EC
Type 5050 A
D-value 200 kN
DC value 135 kN
V-value 75/63 kN
Drawbar load 1000/2000 kg
Order number
3204 996 305

236
Attachments
Trailer hitch
automatic
for the connection of fifth-wheel and central axle trailers with trailer coupling ring 40
according to DIN 74054 or 40 mm according to ISO 8755 as well as identical Class S
trailer coupling rings according to guideline 94/20 EC or ECE 55-01
DC value 92 kN
Drawbar load 1000 kg

Technical equipment and accessories


Type D-value kN V-value kN Hole pattern mm Order number
4040/G145A 100 38 140 x 80 3204 991 104
4040/G150A 137 40 160 x 100 3204 996 314

Toolbox
suitable for every vehicle type
sturdy shape thanks to all-round steel profiles and PUR-coated base with ribbed
surface, waterproof thanks to rubber seals in the lid, three-point lock with stainless
steel pushing rods, actuated through handle with built-in lock, made of heat-resistant,
high-strength, scratch and tear-proof polyurethane
Temperature resistance -40 to +80 °C
Material polyurethane
Scope of supply
Toolbox incl. 2 keys, 4 mounting brackets for attachment under the vehicle floor and
fastening material
Type Version Width mm Height mm Depth mm Order number
101 hinge at the bottom 440 398 480 9081 200 011
102 hinge at the bottom 588 445 480 9080 240 911
103 hinge at the bottom 749 429 450 9081 200 030
104 hinge at the bottom 753 429 550 9081 200 040
105 hinge at the bottom 1040 486 480 9081 200 050
106 hinge at the bottom 755 290 450 9081 200 060
107 hinge at the side 676 664 525 9081 200 190

www.europart.net 237
Universal truck styling
Air horn kit
Super Fanfare
Type Beam
Material Stainless steel
Scope of supply
complete mounting set
Length cm Order number
3 65/70 1002 017 702
80/85 1002 017 701
Technical equipment and accessories

Air horn kit


Original HS
Material Stainless steel
Length 67/76 cm
Scope of supply
complete mounting set
Order number
1002 000 000

Air horn
pneumatic
Version with mini-compressor
Material Stainless steel
Length 55 cm
Order number
1002 017 704

Signal horn
Diameter 100 mm
Frequency 355 Hz
Power consumption 60 W
Voltage 12 V
Order number
9501 241 866

238
Universal truck styling
Wheel cover
Version with snap ring holder
Installation location front
Material Stainless steel
Size Order number
17.5" 8600 045 795
22.5" 8600 045 791
3

Technical equipment and accessories


Wheel cover
Grand Prix
Version with snap ring holder
Installation location front
Material Stainless steel
Size Order number
17.5" 1002 042 040
19.5" 1002 042 030

Wheel cover
Grand Prix
Size 22.5"
Version with snap ring holder
Installation location front
Material Stainless steel
Order number
8600 042 050

Wheel cover
screwed together with original bolts
Size 22.5"
Installation location front
Material Stainless steel
Order number
1002 042 010

www.europart.net 239
Universal truck styling
Wheel cover
Version with snap ring holder
Installation location rear
Material Stainless steel
Size Order number
17.5" 8600 045 796
19.5" 8600 045 794
3 22.5" 8600 032 055
Technical equipment and accessories

Wheel cover
Grand Prix
Version with snap ring holder
Installation location rear
Material Stainless steel
Size Order number
17.5" 1002 042 045
19.5" 1002 042 035

Wheel cover
Grand Prix
Size 22.5"
Version with snap ring holder
Installation location rear
Material Stainless steel
Order number
8600 045 792

Wheel cover
Exklusiv
Size 22.5"
Version with snap ring holder
Installation location rear
Material Stainless steel
Order number
1002 042 065

240
Universal truck styling
Wheel cover
Exklusiv
Size 22.5"
Version with wheel nut caps
Installation location rear
Material Stainless steel
Order number
1002 042 075 3

Technical equipment and accessories


Wheel cover
Brilliant
Size 22.5"
Version open, with snap ring holder
Installation location rear
Material Stainless steel
Order number
1002 042 080

Wheel cover
Classic
Front axle Supersingle, rear axle disc-braked
Size 22.5"
Version closed design
Installation location front/rear
Material Stainless steel
Order number
9199 847 077

Wheel cover
Classic
Front axle Supersingle, rear axle disc-braked
Size 22.5"
Version open
Installation location front/rear
Material Stainless steel
Order number
9199 847 076

www.europart.net 241
Universal truck styling
Wheel cover
Type 1, universal fit
for all rims with strongly swung rim flange
- Very fast fitting (approx. 2 minutes per cap)
- No loosening of wheel bolts or nuts necessary
- The wheel can be removed without the cap having to be removed
Size 22.5"
Material Stainless steel, polished
3 Central cap not included in the scope of supply - please order separately
Version Order number
front 8610 704 100
Technical equipment and accessories

rear 8610 704 200

Accessories
Description Order number
Central cap 8604 501 505

Rim ring
Exklusiv
Size 22.5"
Version with snap ring holder
Installation location rear
Material Stainless steel
Order number
1002 042 095

Rim ring
Standard
Size 22.5"
Version with snap ring holder
Installation location front
Material Stainless steel
Order number
1002 040 000

Rim lining
screwed together with original bolts
Size 22.5"
Installation location rear
Material Stainless steel
Rim width Order number
8,25" 1002 042 020
9" 1002 042 025

242
Universal truck styling
Wheel nut cap
Spanner size mm Order number
27 1002 001 090
30 1002 001 100
32 1002 001 210
33 1002 001 310

Technical equipment and accessories


Wheel stud cover ring
closed design
Material Stainless steel

Version Size Number of holes Order number


for aluminium and steel rims 17.5" 6 1002 001 802
for aluminium and steel rims 17.5/19.5" 8 1002 001 805
for steel wheels 22.5" 10 8600 001 800
for aluminium rims 22.5" 10 8600 007 801

Wheel stud cover ring


open
Material Stainless steel

Version Size Number of holes Order number


for aluminium and steel rims 17.5" 6 8526 501 806
for steel wheels 22.5" 10 1002 001 803

Wheel hub cover


flat
Material Stainless steel
Order number
1002 002 000

www.europart.net 243
Universal truck styling
Wheel hub cover
medium height, ventilated
Material Stainless steel
Height 170 mm
Version Order number
for steel wheels 1002 002 023
for aluminium rims 1002 002 022
3
Technical equipment and accessories

Wheel hub cover


high, vented
Material Stainless steel
Height 240 mm
Version Order number
for steel wheels 1002 002 016
for aluminium rims 1002 002 017

Specialists in application
Always the special tool to suit your trailer

When you use the right tool, you can carry


out any tricky repair or installation quickly
and accurately. EUROPART will help you
with the suitable special tool for a
professional installation!

More information from:


www.europart.net

244
On-board equipment

Reversing video system


PerfectView RVS 550
Voltage 12/24 V
with 5" LCD monitor and colour camera, monitor easily removed because of Easylink
support, optimum picture quality even at low temperatures, USB charger port, compact
colour camera with extra-low design, IR LEDs for better night vision 3
5" colour LCD monitor M 5L

automatic or manual switch-on, automatic day/night switching, normal or mirror image

Technical equipment and accessories


function, 2 separately controllable camera inputs, picture setting can be saved for each
camera, loudspeaker, USB connection for charging of e.g. MP3 players, LED
background lighting, 235000 pixels

CAM 50C colour camera


Normal or mirror image function, anodised and powder coated casing, adjustable sun
glare protection, microphone, temperature-controlled heating, LDR-controlled IR LEDs,
angle of field 120°
Scope of supply
Monitor (cable set), Easylink monitor bracket, camera, 20 m connection cable from
monitor to camera, mounting accessories for all components, dazzle and sun-glare
protection
E certified
Order number
1880 000 009

Reversing video system


PerfectView RVS 750X
with 7" LCD monitor and colour camera, high end system for ultimate comfort and
convenience – optimal day and night-time vision with the large colour monitor and
light-sensitive infra-red LED camera

7" colour LCD monitor M 7LX


for 12 V and 24 V operating voltage, automatic or manual switch-on, automatic
day/night switching, normal or mirror image function, adjustable distance marks,
3 separately controllable camera inputs, picture setting can be saved for each camera,
loudspeaker, USB connection for charging of e.g. MP3 players, LED background
lighting, 337000 pixels

CAM 50C colour camera


Normal or mirror image function, anodised and powder coated casing, adjustable sun
glare protection, microphone, temperature-controlled heating, LDR-controlled IR LEDs,
angle of field 120°
Scope of supply
Monitor (cable set), Easylink monitor bracket, colour camera, 20 m connection cable
from monitor to camera, mounting accessories for all components, visor/sun protection
Order number
(on request) 1881 900 010

www.europart.net 245
On-board equipment

Compressor cool box


CoolFreeze CDF-35
with integrated control electronics, undervoltage protection can be set for load- or
starter battery, electronic fuse, automatic protection against polarity inversion,
dynamically ventilated wire pipe capacitor, standing height for 1.5-litre reusable bottles
3 temperature range +10 to -15 °C, continuously variable with electronic thermostat,
average power consumption 45 W
Volume 31 l
Technical equipment and accessories

Voltage 12/24 V DC
Width x height x depth 560 x 380 x 340 mm
Weight 17 kg
Scope of supply
DC connection cable
TÜV/GS-tested
Order number
9710 200 301

Cool box
TROPICOOL Classic
7-stage temperature control in heating and cooling mode, LED temperature display, memory function stores the last setting,
membrane keyboard protects the electronics from dust and humidity, standing height for 1.5-litre reusable bottles
Cooling max. 30 °C below ambient temperature, heating +50 to +65 °C
average power drawn 55-80 W
Voltage = 12/24. ~ 230 V
TÜV/GS-tested
Type Volume l Dimensions mm Weight kg Order number
TC-21FL 21 450 x 420 x 303 6 9712 112 241
TC-35FL 35 550 x 460 x 376 10 9713 212 241

246
On-board equipment

Cool box
CoolFun CX-18, thermo-electric
standing height for 1.5 litre deposit bottles, can be switched between cold/warm,
cable compartment integrated in the lid
cooling max. approx. 20°C at ambient temperature, heating approx. +65 °C
average power consumption 42 W 3
Volume 18 l
Voltage 12/24 V DC

Technical equipment and accessories


Width x height x depth 390 x 380 x 290 mm
Weight 4.3 kg
Scope of supply
DC connection cable
TÜV/GS-tested
Order number
9711 812 240

Microwave
SAMSUNG Roadmate
Interior lighting, rotary table, 30-minute timer, automatic programming, door with safety
lock
recommended supply line thickness:
22 mm² for a cable length of 0 to max. 3 m
36 mm² for a cable length of 3 to max. 5 m
Capacity 17 l
Voltage 24 V
Current consumption 40 A
Power 500 W
Width x height x depth 460 x 247 x 312 mm
Colour black
Weight 8.1 kg
Scope of supply
mounting kit for wall or floor mounting
Order number
(on request) 9710 002 002

www.europart.net 247
On-board equipment

Kettle
MCK-750-24/N
rugged relay technology, automatically switches off when boiling point is reached,
protected against boiling dry, operating indicator
Capacity 0,75 l
3 Power 380 W
Voltage 24 V
Colour black/aluminium silver
Technical equipment and accessories

Application range
specially developed for mobile applications
Scope of supply
mounting kit for wall or floor mounting
Order number
9710 075 024

Percolator
high quality thermal jug in stainless steel with latch strap for secure hold, automatic
cut-off after brewing, removable filter with drip-stop valve, designed for use with
standard paper filters, removable water tank with water level indicator and safety
fixture, LED indicators
Capacity 750 ml
Version for 6 cups
Voltage 24 V
Power 380 W
Current consumption 25 A
Width x height x depth 270 x 232 x 170 mm
Application range
specially developed for use in trucks
Scope of supply
thermal jug, mounting bracket for wall or floor mounting
Order number
9710 188 624

Bottle cooler
wear-free thermo-electrics with external fan, suitable for all standards 1 to 1.5 liter
bottles, inner container of aluminium for fast cooling/heating, with simple screw
connection
cooling mode up to 22 °C below ambient temperature, heating mode up to +60 °C
beverage temperature
Colour silver grey
Voltage 12/24 V
Order number
1880 000 810

248
Starter batteries

Starter battery
12 V, filled and charged
Circuit 3
Cell type 1
3
The wide range of EUROPART starter batteries for trucks and cars stands out particularly not only thanks to its excellent

Technical equipment and accessories


price-performance ratio but also through good start-up power, low water consumption, universal application possibilities, load
capacity, long service life and reliability. It goes without saying that the quality requirements of EUROPART starter batteries comply
with general DIN/EN standards.
Type CCA A [EN] Capacity Ah Length x width x height mm Bottom rail Order number
620 045 068 680 120 513 x 189 x 223 B00 9560 620 343
635 052 100 1000 135 514 x 175 x 210 B03 9560 635 393
640 035 076 760 140 513 x 189 x 223 B00 9560 640 203
640 036 076 760 140 513 x 189 x 223 B03 9560 635 313
643 033 095 950 143 514 x 218 x 210 B03 9560 643 233
655 013 090 900 155 513 x 223 x 223 B00 9560 643 173
670 043 100 1000 170 513 x 223 x 223 B00 9560 670 183
680 032 100 1000 180 513 x 223 x 223 B00 9560 680 323
725 012 115 1150 225 518 x 276 x 242 B00 9560 710 143

Starter battery
EUROPART Plus, 12 V, filled and charged
Design Super Heavy Duty
Standard EN-4, V3
Circuit 3
Cell type 1
Bottom rail B00

In addition to the product advantages of the EUROPART standard starter batteries, the EUROPART Plus is completely
maintenance-free, has a central degassing vent, a safety cover providing flashback protection, Ca/Ca technology
(Calcium/Calcium technology)
Type CCA A [EN] Capacity Ah Length x width x height mm Order number
680 032 100 1000 180 513 x 223 x 223 9560 680 325
725 012 115 1150 225 518 x 276 x 242 9560 710 145

www.europart.net 249
Starter batteries

Starter battery
Promotive blue, 12 V, filled and charged
Standard EN-3, V2
Design heavy duty
Cell type 1
3 Circuit 3

absolutely maintenance-free, labyrinth safety cover with flashback protection, central degassing, can be stored for up to 15
months, optimised current flow with PowerFrame grid technology for particularly low resistance and maximum conductivity,
Technical equipment and accessories

extended OE technology
Application range
Commercial vehicles with normal energy requirement
Type CCA A [EN] Capacity Ah Length x width x height mm Bottom rail Order number
640 103 080 800 140 513 x 189 x 223 B00 9560 640 104
640 400 080 800 140 513 x 189 x 223 B03 9560 640 401
670 103 100 1000 170 513 x 223 x 223 B00 9560 670 102

Starter battery
Promotive silver, 12 V, filled and charged
Standard EN-4, V3
Design Super Heavy Duty
Circuit 3
Cell type 1
Bottom rail B00
absolutely maintenance-free, labyrinth safety cover with flashback protection, central degassing, can be stored for up to 18
months, optimised current flow with PowerFrame grid technology for particularly low resistance and maximum conductivity,
extended OE technology
Application range
Commercial vehicles with particularly high energy requirement
Type CCA A [EN] Capacity Ah Length x width x height mm Order number
645 400 080 800 145 513 x 189 x 223 9560 645 400
680 108 100 1000 180 513 x 223 x 223 9560 680 110
725 103 115 1150 225 518 x 276 x 242 9560 725 104

250
The technology that keeps your
fleet on the road. Who started it ?

VARTA® Promotive batteries are built to power fleets and reduce Total Cost of
Ownership. Advanced PowerFrame ® and Labyrinth lid technologies, plus durable
design, deliver reliability, zero maintenance, and longer life. Which means less
downtime.
To find out how VARTA can save you money, visit www.varta-automotive.com

It all starts with


Bulbs

H1 halogen headlamp bulb


Version Vision Plus: up to 50 % more light on the road,
10-20 m further visibility
Voltage 24 V
Power 70 W
3 Socket P 14,5 s
Application range
for high beam/low beam and fog light
Technical equipment and accessories

Order number
8900 040 100

H3 halogen headlamp bulb


Voltage 24 V
Power 70 W
Socket PK 22 s
Application range
for low beam/high beam/fog light and worklight
Order number
8900 009 000

H4 halogen headlamp bulb


Voltage 24 V
Power 75/70 W
Socket P 43 t
Application range
for low beam/high beam/fog light
Order number
8900 006 000

H4 halogen headlamp bulb


Version Heavy Duty, Vision Plus: up to 50 % more light on the road,
10-20 m further visibility
Voltage 24 V
Power 75/70 W
Socket P 43 t
Application range
for high beam/low beam and fog light
Order number
8900 008 000

252
Bulbs

H7 halogen headlamp bulb


Voltage 24 V
Power 70 W
Socket PX 26 d
Application range
for low beam/high beam/fog light and worklight
3
Order number
8900 001 030

Technical equipment and accessories


Bulb
Drop-shaped
Voltage 24 V
Power 21 W
Socket BA 15 s
Application range
for indicator, brake, rear fog, reversing lights
Version Order number
8900 003 000
Heavy Duty 8900 010 000

Bulb
Drop-shaped
Voltage 24 V
Power 21/5 W
Socket BAY15d
Application range
for brake/tail light
Order number
8900 013 000

Bulb
spherical
Voltage 24 V
Socket BA 15 s
Application range
for tail/licence plate/position and interior light
Power W Order number
5 8900 001 000
10 8900 002 000

www.europart.net 253
Bulbs

Bulb
Spherical
Version Heavy Duty
Voltage 24 V
Socket BA 15 s
3 Application range
for tail/licence plate/position and interior light
Power W Order number
Technical equipment and accessories

5 8900 011 000


10 8900 012 000

Bulb
festoon bulb
Voltage 24 V
Diameter 11 mm
Socket SV 8,5
Application range
for tail/licence plate/position and interior light
Power W Length mm Order number
5 35 8900 005 000
10 41 8900 040 060

EUROPART® – a powerful brand


Alongside well-known manufacturer's brands,
EUROPART also offers a strong assortment of its
own-brand products with more than 5000 items from
the various EUROPART ranges.
ta
Top quality a
fair price.
Your advantages:
Low-cost alternative for OE standard
Maximum availability at 200 locations in 28 countries
Increase your competitiveness
Consistent service package

254
Worklights

LED working floodlight


Power Beam 2000
16-way reflector made of plastic with plain glass for close-range illumination,
connection cable with polarity protection
Version with 16 LEDs (2000 lm)
Width 115 mm 3
Height 145 mm
Depth 110 mm

Technical equipment and accessories


Light aperture 83 x 83 mm
Voltage 9-33 V
Type Attachment, upright
Colour clear
Housing colour black/blue
Material Casing of aluminium
Scope of supply
with swivel base, cable and M10 mounting bolt
Order number
0996 189 001

LED working floodlight


Pro-Work
high light intensity through free-form mirror design, optics for large-area, intensive
near-field illumination, immune to strong vibrations
Version with 6 LEDs
Width 137 mm
Height 107 mm
Depth 80 mm
Voltage 12/24 V
Cable length 1750 mm
Protection class IP67
Scope of supply
with U fixing bracket and cable
approved for vehicles in accordance with GGVS/ADR
Order number
8840 460 003

www.europart.net 255
Worklights

H3 worklight
Ultra-Beam Heavy Duty
Optics for extremely extensive and uniform ground illumination
Version with protruding edge and non-patterned lens
Connection AMP
3 Width 112 mm
Height 152 mm
Depth 97 mm
Technical equipment and accessories

Light aperture 83 x 83 mm
Range 30 m
Angle of tilt 15-20°
Voltage 12/24 V
Type surface mounting
Colour clear
Housing colour black
Material plastic
Scope of supply
with mounting bracket and vibration damper for four-point mounting
GGVS/ADR suitable
Order number
0007 506 011

Accessories
Description Order number
Bracket for mounting on frame or bodywork 0990 298 001

H3 worklight
Ultra-Beam Standard
Optics for extremely extensive and uniform ground illumination
Version Halogen
Connection AMP
Width 112 mm
Height 102/126.5 mm
Depth 97 mm
Light aperture 83 x 83 mm
Angle of tilt 15-20°
Voltage 12/24 V
Type surface-mounting
Colour clear
Housing colour black
Material plastic casing
Order number
0007 506 081

256
Worklights

H3 worklight
Module 70 with FF® technology for near-field illumination
Version Halogen
Diameter 83 mm
Height 111 mm
Depth 75,3 mm 3
Light aperture 77 mm
Voltage 12/24 V

Technical equipment and accessories


Form round
Colour clear
Housing colour black
Material plastic casing
Scope of supply
with swivel base and M10 mounting bolt
Type Order number
Attachment, upright 0996 176 001
surface-mounting (on request) 0996 176 111

H3 worklight
Version with glass lens, safety guard and switch
Width 158 mm
Height 110 mm
Depth 73 mm
Range 25 m
Socket PK 22s
Voltage 12/24 V
Fastening M10
Type surface-mounting
Form rectangular
Housing colour black
Order number
8840 406 003

www.europart.net 257
Worklights

H3 worklight
Diameter 182 mm
Height 232 mm
Depth 105 mm
Voltage 12/24 V

3 Type
Form
surface-mounting
round
Colour clear
Housing colour black
Technical equipment and accessories

Material plastic

Version Order number


with glass lens for large-area, far-reaching illumination, casing with hand grip and switch, 8810 092 051
U bracket mounting
with glass lens for large-area, far-reaching illumination, casing with grille, hand grip and switch, 8840 202 728
U bracket mounting

H3 worklight
Double-Beam, with double reflector
optics for wide, intensive near-field illumination
Version FF®-technology, with projecting rim, hand grip, grommet and
250 mm long silicone connection cable
Width 158 mm
Height 210 mm
Depth 127 mm
Light aperture 136 x 88 mm
Voltage 12/24 V
Type surface-mounting, suspended/upright, bracket
Form rectangular
Colour clear
Housing colour black
Material plastic casing
Scope of supply
with mounting bracket for four-point mounting
approved for vehicles in accordance with GGVS
Range m Angle of tilt Order number
25 25-35° (on request) 0006 991 021
45 20-45° 0006 991 031

Accessories
Description Order number
Bracket for mounting on frame or bodywork 0990 298 001

258
Worklights
Hazard warning light
with work light
Housing and lens welded, with fold-down stand with non-slip rubber bases
Version Halogen
approved for vehicles in accordance with GGVS
5 mono cells, type LR20, essential !
Order number
9500 081 600 3

Technical equipment and accessories


Our network – 200 locations
in 28 countries
EUROPART – the international
partner for the workshop

www.europart.net

www.europart.net 259
Rotating beacons

3
Technical equipment and accessories

LED beacon
K-LED 2.0
with shell reflector and 20 high-power LEDs, programmable electronics for different flashing sequences or rotating function, light
intensity automatically matched to the ambient light using a sensor (day/night mode)
Operating temperature -40 to +60 °C
Power consumption max. 30 W
Voltage 12/24 V
Protection class IP67
Colour yellow
Fastening Order number
permanent surface mounting 0011 557 101
tube support mounting 0011 557 201
magnetic mounting 0011 557 301

LED beacon
K-LED FO F
Fastening Fixed mounting
Diameter 149.5 mm
Height 88 mm
Voltage 12/24 V
Colour yellow
Order number
0010 311 001

LED beacon
K-LED FO FL
Fastening Flexible tube bracket
Diameter 148 mm
Height 132 mm
Voltage 12/24 V
Colour yellow
Order number
0010 311 011

260
Rotating beacons

LED beacon
Fastening tube bracket
Diameter 135 mm
Height 183 mm
Voltage 12/24 V
Colour yellow 3
Order number
0010 979 011

Technical equipment and accessories


LED beacon
Fastening with magnet
Version with spiral cable
Diameter 135 mm
Height 126.1 mm
Voltage 12/24 V
Colour yellow
Order number
0010 979 021

H1 rotating beacon
Rotafix F
Fastening Fixed mounting
Diameter 130 mm
Height 174 mm
Voltage 24 V
Colour yellow
Scope of supply
with bulb
Order number
0007 337 011

Service parts
Description Order number
Lens 0859 020 001

www.europart.net 261
Rotating beacons

H1 rotating beacon
Rotafix M
Fastening Magnetic base
Version with spiral cable
Diameter 130 mm
3 Height 174 mm
Voltage 24 V
Plug type 2-pole
Technical equipment and accessories

Colour yellow
Scope of supply
with bulb
Order number
0007 337 031

Service parts
Description Order number
Lens 0859 020 001

H1 rotating beacon
Junior M
Fastening Magnetic base
Version with spiral cable
Diameter 136 mm
Height 172.5 mm
Voltage 24 V
Plug type 2-pole
Colour yellow
Scope of supply
with bulb
Order number
0007 552 011

Service parts
Description Order number
Lens 0859 020 001

262
Warning markers
Marking board
for trucks and tractors
retro-reflective type II, fluorescent
Version edged
Material aluminium
Standard ECE 70
Height 130 mm
Width 565 mm
3
Type Order number
left 9650 000 470
right 9650 000 480

Technical equipment and accessories


Marking board set
for trucks and tractor units
reflective type II, fluorescent
Version smooth
Material aluminium
Standard ECE 70
Height 130 mm
Width 565 mm
Order number
9651 000 495

Warning panel
retro-reflecting type 1
Version folding, with edge protection and fastening elements
Material Sheet steel
Width 400 mm
Height 300 mm
Colour orange
in accordance with GGVSEB/ADR
Order number
9650 006 001

Warning panel
Waste
retro-reflecting type 1
Version folding, with fastening elements and edge protection
Material Sheet steel
Width 400 mm
Height 300 mm
Colour white
Order number
9650 205 060

www.europart.net 263
Warning markers
Number panel
retro-reflecting type I
Material sheet steel
Width 400 mm
Height 300 mm
Colour orange/black
according to GGVSEB/ADR

3
Technical equipment and accessories

Version Order number


rigid, with edge protection, without spaces 9651 000 190
rigid, with edge protection, without spaces, with digit set 9650 205 400

Numeral set
25 digits and X
retro-reflecting type I
Version with edge protection
Material sheet steel
Width 70 mm
Height 117 mm
Colour orange/black
Scope of supply
with pouch
according to GGVSEB/ADR
Order number
9650 205 410

Parking warning sign


retro-reflective type II, fluorescent
Form A
Material sheet steel
Width 423 mm
Height 423 mm
Colour white/red
in accordance with § 17 StVO (Rules of the Road), § 22a StVZO and TA 18b,
in accordance with § 51c, § 72 StVZO (German Rules of the Road), DIN 11030

Version Type Order number


folding, with edge protection indicating left 9650 204 510
folding, with edge protection indicating right 9651 204 510
folding, without edge protection indicating left 9650 010 700
folding, without edge protection indicating right 9650 010 710

264
Warning markers
Parking warning sign
retro-reflective type II, fluorescent
Form A
Material sheet steel
Width 423 mm
Height 423 mm
Colour white/red
in accordance with § 17 StVO (Rules of the Road), § 22a StVZO and TA 18b,
in accordance with § 51c, § 72 StVZO (German Rules of the Road), DIN 11030 3
Version Order number
rigid, with edge protection 9650 204 500

Technical equipment and accessories


rigid, without edge protection 9650 010 690

Tarpauling repair set


Scope of supply
3 of 30 x 20 cm, 4 of 30 x 10 cm, 3 of 20 x 20 cm, 4 of 20 x 10 cm, 7 of 20 x 5 cm,
6 of 10 x 10 cm
Colour code Colour Order number
RAL 9005 black 9082 550 147
RAL 9006 silver 9082 550 148
RAL 7038 light grey 9082 550 149
RAL 5010 dark blue 9082 550 150
RAL 3002 red 9082 550 152
RAL 2011 orange 9082 550 154
RAL 6026 dark green 9082 550 155
RAL 1021 yellow 9082 550 157
RAL 9010 white 9082 550 176

www.europart.net 265
Warning markers

3
Reflective tape
Technical equipment and accessories

for marking contours


Special tape for the conspicuous marking of vehicle bodywork (flatbed), to increase the passive safety on parked vehicles,
type III retro-reflective
Standard ECE 104, ECE 48
Container Roll
Length 50 m
Width 51 mm
Application range
Flat bed trucks
For new flatbeds which are not older than 3 months
Colour Order number
white 9657 200 600
yellow 9657 200 610
red 9657 200 640

Reflective tape
for marking contours
Special tape for the conspicuous marking of vehicle bodywork (van body/fixed body), to increase the passive safety on parked
vehicles, type III retro-reflective.
Standard ECE 104, ECE 48
Container Roll
Width 55 mm
Application range
box trucks/fixed bodies
Length m Colour Order number
50 white 9657 200 620
50 yellow 9657 200 630
50 red 9657 200 650
12.5 white 9657 200 622
12.5 yellow 9657 200 632
12.5 red 9657 200 652

266
Emergency equipment

Warning flash lamp


With 16 ultra-bright LEDs, 10 light variations (also SOS morse code) can be switched,
visible at night up to 10 km, light duration up to 100 hours, with magnet: Easy to
mount, for instance on the vehicle roof, visibility range 360°, breakproof, not sensitive
to temperature, waterproof and floatable, changeable batteries (lithium CR 123
recommended)
Weight 200 g 3
Diameter 120 mm
Height 35 mm

Technical equipment and accessories


Application range
for protection against accidents, breakdowns and for personal safety
Colour Lens colour Order number
red red 9195 491 151
blue yellow 9195 491 152

Case for hazardous goods


approved according to hazardous goods transport regulations
Type 73 SN -VM
Dimensions 420 x 330 x 165 mm
Scope of supply
Panorama full mask, combination filter DIN 3183, A2 B2 E2 K2, eye rinsing bottle with
sterile contents, gloves PVC stockinette lined, light protective clothing, over-boots
made of rubber
Order number
9194 320 002
(Illustration similar)

Case for hazardous goods


approved according to hazardous goods transport regulations
Type 74 SN-VM
Dimensions 420 x 330 x 165 mm
Scope of supply
Panorama full mask, combination filter DIN 3183, A2 B2 E2 K2, eye rinsing bottle with
sterile filling, gloves PVC-jersey lined, protective suit with hood, over-boots made of
rubber, first-aid equipment in accordance with DIN 13 164, rescue blanket
Order number
(Illustration similar) 9194 320 003

www.europart.net 267
Emergency equipment

Rechargeable fire extinguisher


Fire class A, B, C, refillable
very service-friendly, CE compliant
Contents 6 kg
Standard DIN EN 3
3 Version semi-automatic, with pivoted extinguisher pistol and internal
cartridge
Type P6STAR
Technical equipment and accessories

Temperature range -30 to +60 °C


Application range
ideal for hazardous goods transport
GS tested
Order number
9195 491 025

Continuous pressure fire extinguisher


Fire class A, B, C, refillable
made of high quality sheet steel, CE compliant
Contents 6 kg
Standard DIN EN 3
Type PD 6 GA
Temperature range -30 to +60 °C
Application range
suitable for LPG and heating oil storage, garages and hobby rooms
Scope of supply
high-quality wall bracket
GS tested
Order number
9195 491 125

Powder fire extinguisher


for passenger car, fire class A, B and C, refillable
Contents 2 kg
Standard EN 3
Type F2G
Scope of supply
complete with testing valve, vibration-proof car bracket and tightening strap
Order number
9195 492 000

268
Emergency equipment
Fire extinguisher box
for 6 kg and 9 kg fire extinguishers
Type Rimbox 155
Material polypropylene copolymer, recyclable, impact-proof and UV-stable
Version with window
Height 674 mm
Width 313 mm
Depth
Weight
225 mm
3 kg
3
Order number
9080 240 912

Technical equipment and accessories


Vehicle bracket
for fire extinguisher 6 kg
Scope of supply
Bracket incl. 2 retaining straps
Order number
9195 491 200

Grille protective cover


for fire extinguisher up to 6 kg
Order number
9195 516 000

Portable fire extinguishers must be suitable for use on a vehicle and must meet the
relevant requirements of the EN 3 standard.

www.europart.net 269
Special tools
Basic set
Commercial vehicle silent bearing
for use of the corresponding half-shell sets when replacing the silent bearing at the leaf
spring, stabilizer, driver's cab mounting, shock absorber without removing the axle
Version hydraulic
Scope of supply
Clamping block for pretensioning of silent bearings up to 90 mm diameter, hydraulic
3 cylinder 17.5 t, hydraulic coupling for hydraulic cylinder, hydraulic foot pump max. 700
bar, complete with 10 mm (3/8") NPT connection and 2.50 m hose, M20 nut with collar
(2 pieces) and truck tension bolts 515 mm
Order number
Technical equipment and accessories

9140 500 006

Bit assortment
IMPACT
with 22 mm hexagonal drive
Application range
for assembly and disassembly on cylinder head screws, brake caliper screws, drop
arm (e.g. Actros), wheel flange screws, oil drain screws, shock absorber fixture
Scope of supply
1 TORX® each T60/T70/T80/T90/T100
1 hexagon socket each 17/19/22/24 mm
1 outer TORX® each E18/E20/E22/E24
2 bit bracket with 3/4" and 1" drive
1 L-key for holding the bits in the bracket
in plastic case
Version Order number
16-piece 9514 057 940

Double-ended ring spanner set


straight, extra long, ultra-strong
Length 290-440 mm
Material chrome vanadium
Surface high-gloss polished
Application range
e.g. for carrier joints, stub axle screw fittings, cardan shaft flange (also truck before
towing)
Scope of supply
10 x 11, 12 x 14, 13 x 15, 16 x 18, 17 x 19, 22 x 24 mm
in plastic case
Version Order number
6-piece 3566 180 619

270
Special tools
Pry bar set
Plastic handles with protective caps
Material hardened tooling steel
Surface bronzed
Scope of supply
1 each of pry bars with lengths 200/300/450/600 mm
Version Order number
4-piece 9534 759 010 3

Technical equipment and accessories


Filter wrench
for air dryer cartridge
for loosening granulate cartridges on commercial vehicles
Material Special steel
Drive 1/2"
Clamping range 95-165 mm
Order number
9856 745 130
(Illustration similar)

Impact socket
DIN 3129/ISO 2725-2
Form Hexagon
Version short
Drive 1"
Material chrome vanadium special steel
Surface bronzed/black
Application range
for hexagon head screws, for all electric or pneumatic socket wrenches (impact
wrenches)
Scope of supply
with connection pin and O-ring
Spanner size mm Order number
55 9534 091 515
60 9534 091 520

Socket wrench insert


for alternator
Form Hexagon
Drive 1/2"
Length 200 mm
Spanner size 19 mm
Application range
for ribbed V-belt tensioning on alternators, e.g. on Mercedes-Benz SK series and
MAN F90, F2000
Order number
9534 005 256

www.europart.net 271
Special tools
Socket set
Form Hexagon T-profile, without bore
Drive 1/2"
Length 80 mm
Application range
for trucks
Scope of supply

3 1 each x T60/T70/T80/T90/T100
Version Order number
5-piece 9500 140 518
Technical equipment and accessories

Socket wrench insert


without face spanner bore
Form Hexagon T-profile, without bore
Version long
Drive 1/2"
Size T70
Length 80 mm
Application range
e.g. Mercedes-Benz, MAN, DAF rear axle, oil drain screw
Order number
9534 005 349

Impact driver socket


IMPACT insert
Form Hexagon socket
Drive 3/4"
Length 138 mm
Spanner size 14 mm
Application range
zur mounting of hexagon socket brake caliper screws on the rear axle of
Mercedes-Benz Actros and Citaro for axle types HL7 + HL8 Hypoid,
Neoplan ZF and for MAN TGA wheel hubs
Order number
9534 001 441

Impact driver socket


IMPACT insert
Form twelve edges
Drive 3/4"
Length 110 mm
Application range
for truck cylinder head screws
Spanner size mm Order number
17 9514 050 072
19 9514 050 073

272
Special tools
Ball joint extraction tool
Clamping range 34 mm
Lever clamping range up to 70 mm
Application Order number
for medium-sized trucks, buses and construction vehicles 9500 001 293
for heavy-duty trucks, buses and construction vehicles 2300 043 040

Technical equipment and accessories


Radiator pressure test tool set
Pressure loss monitoring via pressure gauge, possibility of testing blanking plugs,
pressure testing of cooling system
Measuring range 0-2,5 bar
Scope of supply
1 pump
7 radiator adapters for current trucks by DAF, IVECO, Mercedes-Benz, MAN, Scania,
Renault and Volvo
in case
Version Order number
8-piece 9514 050 083

Pipe connection key set


Open
Application range
For injector pipework, air conditioning systems, brake pipes, compressed air and
hydraulic pipework, oil pressure switch, 1/2" drive
Scope of supply
1 each of ring spanners 20/21/22/23/24/25/26/27/28/30/32 mm
1 extension, 125 mm
1 jointed handle, 385 mm
Version Order number
13-piece 3566 180 774

Oil pressure tester


for diagnosis of leaks in the oil system, scale 0-10 bar
Scope of supply
Connection adapter:
R 1/8" DIN 2999
1/8" x 27 NPT
1/4" x 18 NPT-3/8" x 20 UNF-1/2" x 20 UNF
M10 x 1.0/M12 x 1.5/M14 x 1.5/M16 x 1.5/M18 x 1.5/90°
Order number
9514 050 086

www.europart.net 273
Special tools
Pin and groove nut set
for pressure screws on nozzle holder
Scope of supply
1 bit 1/2" drive, 4 teeth, 72 mm long (for Mercedes-Benz series OM 401/421, 403/423,
LA, A, 470)
1 bit with 32 mm outer hexagon drive, 4 teeth, with inner thread M14 x 1.5 mm, 70 mm
long (for Mercedes-Benz, Neoplan, Setra)
1 bit 1/2" drive, 3 teeth, 120 mm long (for Mercedes-Benz, MAN)
3 1 bit with 32 mm outer hexagon drive, 4 teeth, 120 mm long (for Mercedes-Benz,
MAN)
Version Order number
Technical equipment and accessories

4-piece 9514 050 082

Piston ring cable tie


with spanner wrench
with full fine adjustment
Material Special spring band steel
Length 80 mm
Clamping range 90-175 mm
Order number
9240 072 298

Piston ring pliers


blue handles
for secure attachment of piston rings
Material nickel-plated to a gloss
Length 240 mm
Clamping range 110-160 mm
Order number
9240 639 753

274
Special tools

Piston ring pliers


hardened with prism plates
for secure spreading of piston rings
Material chrome-plated, bronzed tips
Length 220 mm
Clamping range 60-160 mm
Order number 3
9240 072 304

Technical equipment and accessories


Brake spring pliers
for drum brakes
chrome-plated, with special binding and supporting crown, especially suitable for glued
brake pads, heavy-duty model with exchangeable spring hooks and hand pinch
protection
Material Chrome vanadium steel
Length 500 mm
Order number
9240 072 390

Motor turning gear


for Mercedes-Benz and MAN
with new, thin baseplate and 2 toothed wheels
suitable for Mercedes-Benz engines, series 400 and 500
MAN 6- and 12-cylinder engines
Drive 2"
Order number
9500 500 505

Motor turning gear


for Mercedes-Benz and MAN
with new, extra thick baseplate and 3 toothed wheels
suitable for Mercedes-Benz engines, series 900
MAN 5-, 6- and 8-cylinder engines
Drive 1/2"
Order number
9500 500 506

www.europart.net 275
Diagnosis, maintenance and repair devices

Battery charger
MXT 14
CTEK charger, electronic, SUPPLY – special mode in which the device can be used
as a power supply unit if the battery is removed (radio code), Regeneration mode –
special mode in which exhaustively discharged batteries can be regenerated and

3 returned to full capacity, with 8-stage, fully-automatic IIUoUp charging characteristics


without voltage peaks,
MAN approval issued
Technical data
Technical equipment and accessories

Battery capacity: 28-300 Ah (charge), 28-500 Ah (maintain)


Battery types: open, maintenance-free AGM, gel and lead-calcium
Reverse current: < 2.3 mA
Charging time for a 60 Ah battery: 4 hrs at 14 A
Protection class IP44
Weight 1.4 kg
Cable length 1.85 m
Voltage 170-260 V AC
Charge voltage 27.2 V, 28.8 V, 31.6 V, nominal 24 V
Charge current, max. 14 A
Width x Height x Length 128 x 64 x 233 mm
GS-tested, 2 year manufacturer's warranty
Order number
9539 640 145

Battery charger
XT 14000 EXTENDED
High-frequency charger with fully automatic charging characteristic IIUoIUp without
voltage peaks, the solution for permanent installation in vehicles with 24V on-board
voltage, for open, maintenance-free, AGM, GEL and lead-calcium batteries
Technical data
Battery capacity: 28-300 Ah (charging), 28-500 Ah (maintenance)
Back current drain: < 2 Ah/month
Protection class IP44
Connection 24 V
Weight 2.4 kg
Version 7-stage charging characteristic
Voltage 220-240 V AC
Charge voltage 28.8 V, nominal 24 V
Charge current, max. 14 A
Width x Height x Length 128 x 64 x 233 mm
Application range
suitable for vehicles in which electrical consumers are regularly operated with the
vehicle at a standstill or for seasonal operation
Scope of supply
6 m cable with M8 ring terminals for battery connection
Order number
9539 640 101

276
Diagnosis, maintenance and repair devices

Start booster
AS 12-24/1600
maximum starting power through extremely deep-cycle resistant AGM battery
(replaceable), lifetime for max. 50% start discharge: 1,000 cycles, correct use protects
the electronic equipment of the vehicle, built-in voltmeter which indicates the state of
charge of the batteries and the correct operation of the charging equipment as well as
the generator, built-in socket, high-quality internally bridged crocodile clips with a very 3
wide opening angle, impact-resistant polyethylene casing, charging via electronic
battery charger with pulse charge retention or with cable (not included in the delivery)
via the generator through the vehicle's cigarette lighter socket

Technical equipment and accessories


Technical data
Starting current: at 12 Volt 1600 A, at 24 Volt 800 A
Peak current: at 12 Volts 4740 A, at 24 Volts 2370 A
Version portable
Weight 22 kg
Cable length 1.35 m
Cable cross-section 35 mm²
Dimensions 485 x 520 x 160 mm
suitable for Vehicles up to 250 horsepower at 24 V
Order number
9539 640 164

Start booster
ASF 12-24/3200
professional external starter unit, maximum cold-start power thanks to an extremely
cycle-resistant AGM battery, start-up without voltage peaks, manual voltage selection,
correct use protects vehicles' electronic components, integrated voltmeter which
displays the charging status of the batteries and the correct functioning of the charging
equipment and alternator, built-in socket, high-quality, internally bridged crocodile clips
with a very wide opening angle, impact-resistant one-piece housing with lifetime
guarantee, charging through electronic battery charger with pulse charging
preservation or using the cable provided through the alternator at the vehicle's
cigarette lighter.
Technical data
Service life 1000 cycles with max. 50 % start discharge
Starting current 3200 A at 12 V, 1600 A at 24 V
Peak current 7750 A at 12 V, 3875 A at 24 V
Weight 38 kg
Cable length 1.75 m
Cable cross-section 70 mm²
Voltage 12/24 V
Scope of supply
IUU charger
The IUU charger provided allows permanent connection to the mains. This
means full power is always available immediately. Incl. short-circuit and inverse
polarity protection.
Order number
9539 640 168

www.europart.net 277
Diagnosis, maintenance and repair devices
Test case
LE-UN AB03
With the collaboration of various commercial vehicle manufacturers, a testing system
for SCR equipment was developed, which is already successfully being used at the
manufacturers' training centres and is recommended by them. The AdBlue® testing
case offers the facility to perform the necessary mechanical tests on AdBlue® exhaust
gas aftertreatment systems.
All the testing components in the case are manufactured from selected high-quality
3 materials to ensure a long service life involving frequent contact with the corrosive
AdBlue®. The case is equipped for the Denoxtronic systems I and II.
Mechanical measurements to be performed:
Denoxtronic I
Technical equipment and accessories

- Quantity measurement at the supply module and at the dosage module


Denoxtronic II
- Quantity measurement at the dosage module
- Visual check of the spray pattern
- Flow rate check of the heating line
- Optional: pressure measurement
Application range
for Denoxtronic I and II AdBlue® systems
Scope of supply
Measuring containers with caps (250 ml and 1 litre), oil testing paper, hook and
magnet for mounting, rinsing hose
for Denoxtronic I
- Pressure/metering unit
- Adapter hoses
- Threaded adapter
- 180 Ohm resistance
- Chain for measuring containers
for Denoxtronic II
- Scales for exact measurement of the AdBlue® quantity, calibrating weight
- Adapter hoses and cables
- Bypass line
- Rubber leash and blanking plugs
Order number
9682 202 411

AdBlue® must not contain any mineral oils or greases, nor any silicone oils or greases!
Lubricate components: for instance O-rings in the pipe system, threaded fittings at the
filter etc. with liquid soap or Vaseline®.
Once having come into contact with AdBlue®, receptacles such as measuring containers,
funnels or adapter hoses must then only be used for diagnosis and work on AdBlue®
systems.

Test strips
for detecting diesel and oils in AdBlue®
for detecting incorrect tank filling and testing in warranties
Contents 100 strips
Dimensions 20 x 70 mm
Oil and diesel damage the AdBlue® system
Order number
9682 202 412

278
Diagnosis, maintenance and repair devices
Test device
equipped with automatic temperature compensation (ATC), easy to read, adjustable
eyepiece
Application range
for measuring AdBlue®, anti-freeze coolant G11/G12/G13, anti-freeze screen wash
systems, battery acid density
Scope of supply
Metal measuring device, pipette, screwdriver for calibration, device box
Order number
3
9500 100 529

Technical equipment and accessories


Axle leg bolt press
FP 50 s
hydraulic pressing jig for pressing kingpins in and out with the axle built in and
removed
Pressure 40 t
Stroke 115 mm
Weight 45 kg
Scope of supply
Press body with hand pump included, bridge and piston locking piece,
2 stay bolts with nuts, bridge reducer (55/65 mm diameter)
Order number
9534 004 012

Stud accessories set


Kingpin press FP 40 i/FP 50 i
Scope of supply
comprising one pressure bolt each in the sizes:
- Diameter 21.5 x Length 150 mm
- Diameter 24.5 x Length 150 mm
- Diameter 30.0 x Length 120 mm
- Diameter 30.0 x Length 220 mm
- Diameter 34.0 x Length 120 mm
- Diameter 34.0 x Length 220 mm
Version Order number
6-piece 9534 004 020

www.europart.net 279
Diagnosis, maintenance and repair devices
Axle leg bolt press set
FP 65 s
For pressing bolts in and out without removing the front axle, saves a great deal of
time, easy to handle, works in any position, high pressing force, can also be used
as a stationary and mobile workshop press
Version for MAN special application as well as all other trucks
Pressure 73 t
Stroke 115 mm
3 Clearance 250 mm
Scope of supply
1 press body, 2 stay bolts, 1 transverse bridge complete, 1 reducer for bridge bore
Technical equipment and accessories

diameter 70/55 mm, 1 separate hand pump with 1.8 m hydraulic hose, 1 pressure bolt
set (6-piece) diameter 21.5 - 39 mm, 1 bridge and piston locking piece, 1 lifting and
transport cart, pivotable
Order number
9534 004 055

Short-circuit and interruption detector


Fast locating of short-circuits, broken cables and creepage currents without having to
pierce wires, no time-consuming dismantling of plastic trims, entry ladders, carpets
etc.; wire identification, wire testing, standard tests and special tests, this precision unit
comprises a transmitter, locator, current tester and safety contact adapter in three
sizes, the locator part has a choice of three sensitivity levels
Application range
It can be used for all types of circuits with voltages between 6 and 42 V DC, e.g.
passenger cars, trucks, trailers, boats, etc.
Order number
9682 220 510

Leak detector
ULTRASONIC Easy Flex
small, handy and compact, easily locates faults e.g. on pneumatic, steam, gas or vacuum systems, receives airborne ultrasonic
signals (38-42 kHz) which form around a leak spot and transforms these into acoustic signals, the nearer and larger the leak spot,
the faster the acoustic signal
Scope of supply
with headphones, 9 V block battery, in case
Order number
9526 611 021

280
Diagnosis, maintenance and repair devices

Repair kit
7NKSR40, Truck
for the repairs of all commercial vehicle radiator hoses, independent of the vehicle or
engine make, all radii can be made up, the connection fittings have a bead on both
sides to ensure safe and permanently sealed connections, any unexpected hose
defects are repaired immediately and at low cost.
Application range
3
for 38, 50, 55 and 60 mm radiator hoses
Scope of supply

Technical equipment and accessories


1 each of hose piece, length 450 mm: 38 x 4 mm/50 x 4.5 mm/55 x 4.5 mm/60 x 5 mm
1 each of hose bend 90°: 38 x 5 mm/50 x 6 mm/55 x 6 mm/60 x 6 mm
4 each of pipe pieces with bead, length 60 mm: 38 x 1.5 mm/50 x 1.5 mm/55 x 1.5 mm/
60 x 1.5 mm
Worm drive clamps W2: 4 x Torro 35-50/12 mm, 8 x Torro 50-70/12 mm, 4 x Torro
60-80/12 mm
Version Order number
40-piece 9539 641 070

Repair kit
Compressed air
Scope of supply
2 x straight pipe coupling 4 mm
2 x straight pipe coupling 6 mm
2 x straight pipe coupling 8 mm
2 x straight pipe coupling 10 mm
2 x straight pipe coupling 12 mm
2 x straight pipe coupling 14 mm
2 x straight pipe coupling 16 mm
1 x PA pipe 4 x 1, 230 mm long
1 x PA pipe 6 x 1, 230 mm long
1 x PA pipe 8 x 1, 230 mm long
1 x PA pipe 10 x 1, 230 mm long
1 x PA pipe 12 x 1.5, 230 mm long
1 x PA pipe 14 x 1.5, 230 mm long
1 x PA pipe 16 x 2, 230 mm long
1 x PA pipe cutter
Application range
suitable for the quick repair of PA pipes with dimensions 4, 6, 8, 10, 12, 14 and 16 mm
Please follow the relevant repair instructions.
Order number
9539 641 206

www.europart.net 281
Diagnosis, maintenance and repair devices

Fuel pipe repair kit


you can use this selection to make a repair very easily, quickly and economically, by
installing a new connector on the existing line
Scope of supply
2 x pipe connector, straight 8 mm
3 2 x pipe connector, straight 10 mm
1 x pipe connector, angled ∅ 8 mm
1 x pipe connector, angled ∅ 10 mm
1 x pipe connector, tee 8 mm
Technical equipment and accessories

1 x pipe connector, tee 10 mm


1 x SAE connector, straight 7.89 - 8.1 mm
1 x SAE connector, straight 9.89 - 10.1 mm
1 x SAE connector, 90° 7.89 - 8 mm
1 x SAE connector, 90° 9.89 - 10 mm
1 x Normaquick double fitting 8 mm, S 5/16-6
1 x Normaquick double fitting 10 mm, S 3/8-5/16
5 x plastic pipe section, 8 mm, length 50 mm
5 x plastic pipe section, 10 mm, length 50 mm
5 x connecting sleeve 6 x 0.4 x 22
5 x connecting sleeve 8 x 0.4 x 22
2 x reducing union, straight, 10-8 mm
4 x Oetiker stepless 1-lug clamp 015.3-706 R
4 x Oetiker stepless 1-lug clamp 016.6-706 R
Version Order number
44-piece 9539 641 162

Filling and bleeding device


for diesel filters
filling and bleeding of diesel filters while still installed, connected to compressed air,
the integrated venturi system creates a powerful vacuum and extracts the fuel
Application range
for use when changing a filter, vehicle refuelled with wrong fuel or driven until the tank
is empty
Scope of supply
matching hoses (4, 6, 8 mm) with plug-in nipple) for all diesel direct injection systems,
e.g. HDI, CDI etc., "Chamäleon" based vacuum pump with filling and bleeding kit
Order number
9682 220 511

282
Diagnosis, maintenance and repair devices

Disconnecting pliers
universal, Type 7DSK01
allows single-handed opening of SAE quick-release couplings, safe handling, gripper
opening with release spring (self-opening)
Application range
SAE quick-release couplings on fuel lines 3
Order number
9539 641 182

Technical equipment and accessories


Disconnecting pliers
universal, Type 7DSKG01
needed when changing fuel filters which are equipped with quick-release couplings,
prevents damage to the SAE quick-release couplings
Application range
SAE quick-release couplings on fuel filters
Order number
9539 641 183

www.europart.net 283
Diagnosis, maintenance and repair devices

Promotion package
Navigator TXTs with IDC4 Truck
the action pack offers a complete solution for diagnosis around the truck and
comprehensive work areas of buses, trailers, semi-trailers, light commercial vehicles,
truck-mounted cranes, container trucks and industrial engines; the diagnostic software
3 can be installed on all standard Windows PCs and has intuitive menu navigation

functions in overview:
- wide-ranging diagnosis and vehicle coverage
Technical equipment and accessories

- simplified truck identification by VIN or engine code


- automatic fault memory enquiry into all familiar systems (Vehicle Check-Up)
- reading and deletion of stored fault codes as well as display of fault code descriptions
- queries for technical information and data
- electrical wiring diagrams with component layout
- potential access into the TEXA "resolved errors" database via Google® search
function
- queries for status messages and parameters
- making settings and coding
- control of actuators
- parameterisation and commissioning of ABS and EBS systems
- wireless Bluetooth® communication with the diagnostic interface
- enhancement using measurement module (oscilloscope and signal generator)
- software integration for CAR, BIKE and AGRI available
- automatic update function
- PASS-THRU capable according to SAE J2534
Scope of supply
- NAVIGATOR TXTs diagnostic interface
- IDC4 TRUCK PLUS diagnostic software
- USB hardware key
- TEXPACK TRUCK, update contract for 12 months
- TEXINFO Call Center, diagnostic help via telephone for 12 months
- TEXINFO technical notices, access for 12 months
- TEXINFO Google search function, access for 12 months
- USB connection cable
- EOBD cable
- holding strap for Navigator
- storage case
- operating instructions
Order number
9539 003 635

284
Diagnosis, maintenance and repair devices

Accessories set
for Navigator TXTs, this set is essential if further diagnostic cables are used
Version Order number
3-piece 9539 003 382

Technical equipment and accessories


Interface cable
for connecting the vehicle to the diagnosis unit
Version Order number
37-pole 9539 003 263
4 + 8-pole 9539 003 264

Diagnosis interface unit


Uniprobe Truck
Module for measuring electrical values with USB connection or Bluetooth, the
measurements available are multimeter, 4-channel oscilloscope, battery efficiency test
and starter/alternator switching circuit (2nd generation), physical/electrical monitoring
of CAN networks (2nd generation), high voltage test, integrated ignition coils, misfires
and traditional pressure tests
Scope of supply
Strap, manual and software
Amp clamp BICOR3
- 10 mV/A from 0 to 200 A
- 1 mV/A from 0 to 1,200 A
absolutely necessary for testing starter and charging systems for vans and light
commercial vehicles
Amp clamp BICOR4
- 1 V/A from 0 to 3 A
- 0.1 V/A from 0 to 30 A
absolutely necessary for all lost current tests
Order number
9539 003 363

www.europart.net 285
Diagnosis, maintenance and repair devices

3
Technical equipment and accessories

Diagnosis unit
Axone TRUCK Service
Convenient service unit, specially for the truck or bus company with their own small workshop who would like to perform standard
maintenance themselves
- global scanning of all the control units installed in the vehicle with read-out and deletion of the fault codes stored there
- service reset for oil, brake linings and air filter
- clutch initialisation
- coding of injectors
- initialisation of terminal W (generator)
- air suspension level adjustment
- truck OBD scanning tool
- new generation Axone Direct (with new HD electronics) via cable
- SD memory card with special software
- advanced electronics with powerful processor for use on 24 V systems
Scope of supply
SD card with ATS software, OBD cable, kit for external update via PC
Order number
9539 003 550

Accessories
Description Order number
Adapter cable for voltage supply, with battery clamps 9539 003 422
Docking station 9539 003 423
Equipment case 2127 010 663
Service contract for software updating for 1 year 9539 009 715
Mains cable 9539 003 551

Now for vans as well

We would be pleased to advise you on site as well. Contact us!

286
Diagnosis, maintenance and repair devices

Technical equipment and accessories


Assembly jig
cDISK, Pressure plates
Pressure plate fitting tool for the removal and installation of truck clutches, the pressure plates of which are very difficult to install
and remove on account of their high net weight of up to 80 kg, the cDISK makes this task much easier. In combination with existing
garage equipment (garage crane, crane, pit or floor lifting trolley), the pressure plate and/or the flywheel can be fitted easily by a
single person. The adjustable angle of tilt and ROLLFIT system guarantee optimum working ergonomics.
Scope of supply
Basic tool, fitting arm, transport hoop, exchangeable pins 35, 45 and 55 mm
Order number
9534 004 200

Flywheel adaptation
for pit lifts or floor lifts
positive-locking hold ensured by hexagonal screws
Surface yellow chromated
Diameter of hole circle 450 mm
Load capacity 80 kg
Weight 1.5 kg
Application range
can only be used in conjunction with cDisk base plate fitting tool
Order number
9534 004 205

Flywheel adaptation
for clutch OM 470-473
used for fast removal and installation of clutches on commercial vehicles, trucks and
buses
Version Locking and unlocking via push-button
Surface electrogalvanized blue
Diameter of hole circle 480 mm
Weight 6 kg
Application range
can only be used in connection with cDisk base plate mounting device
Order number
9534 004 206

www.europart.net 287
Diagnosis, maintenance and repair devices

Unlocking tool set


for air-conditioning systems
for unlocking various quick-release couplings on air-conditioning systems, air, oil and
fuel lines
Scope of supply
3 Plastic carrying case
Version Order number
22-piece 9539 641 050
Technical equipment and accessories

Brake maintenance unit


mineral oil version
one-man operation, brake system leak test in the low-pressure range, suitable for all
ABS systems and hydraulic clutches, working pressure adjustable, brake fluid supply,
simple operation, unit switches off automatically at a residual quantity of approx. 0.8
litres (optical/acoustic warning signal)
Pressure range 0-3 bar
Contents 10 l
Scope of supply
incl. accessories set MAN TGA no. 98
Order number
9539 500 040

Brake maintenance unit


Vario 5-20 MO
one-main operation, intelligent technology with automatic control mechanisms, suitable
for hydraulic clutches and gearshift control, stepless adjustment of pressure control
range, with electronic deactivation
Pressure range 0-3,5 bar
Temperature range 0 to 45 °C
Length of filling hose 3.5 m
Length of mains cable 3.5 m
Power supply 230-60 V
Order number
9539 500 045

288
Diagnosis, maintenance and repair devices
Accessories set
Type no. 98 MO MAN TGA, for brake maintenance unit
suitable for VARIO 5 MO
Scope of supply
adapter, 3 hoses, bleeder bottle
Version Order number
5-piece 9539 500 047
3

Technical equipment and accessories


Accessories set
Type no. 102 MO, for brake maintenance unit
for filling and bleeding the clutch and gearshift control
Scope of supply
2 adapters, 3 hoses, canister
Version Order number
6-piece 9539 500 048

Oil filter cap set


Commercial vehicles
different cartridges and casings are used in oil and fuel tank filters for commercial
vehicles; with this set, almost all oil and fuel filters found in commercial vehicles can be
removed and installed.

Contents 9-piece
Colour black
Material thickness 2.5 mm
suitable for Size 36 mm, hexagon - Mercedes-Benz (e.g. Axor engine series 400, Atego engine series 900, Actros
engine series 500, buses), Scania (PDE V8-engine, HP1-engine fuel filter), different oil and fuel filter casing
covers
Size 74 mm, 14-edges - MAN (series TGM and TGL), Mercedes-Benz (e.g. Sprinter engine series 600)
Size 106 mm, 15-edges - MAN (8-10 tonnes series L 2000), Scania (PDE-engine, Fiat (Ducato 2,5 D/TD),
Iveco
Size 107 mm, 15-edges - Volvo, Iveco, Renault, Scania oil filters and fuel filters
Size 108 mm, 15-edges - Volvo, Iveco, Renault, Scania oil filters and fuel filters
Size 108 mm, 18 grooves - Renault transporters (Master, Traffic 2.4, 2.5, 2.8 D/TD), Opel (Movano)
Size 135 mm, 18-edges - MAN 18-48 tonnes series F 2000, TGA, oil filter casing cover
Order number
9539 641 026

www.europart.net 289
Chemical products

Motor oil
5W30
all-year motor oil, excellent cold start properties, keeps the charge air cooler extremely
clean, has very long oil changing intervals up to 120,000 km, excellent smooth running
properties, significantly reduced fuel consumption
3 Version synthetic
Specification API CI-4, ACEA E6-10/E7-10, MB 228.51, MAN M 3477, Volvo VDS
III, Volvo CNG, MAN 3271-1, Renault RGD/RLD-RLD-2, MTU Type
3.1, Deutz DQC IV-05 / IV-10 LA, Mack EO-M Plus, Caterpillar ECF-2,
Technical equipment and accessories

DAF
Application range
specially developed for reduced-emission LOW SAPS EURO 4, EURO 5 and EURO 6
engines
Contents Container Order number
20 l Canister 9773 000 007
55 l Barrel 9773 000 008
200 l Barrel 9773 000 009

Motor oil
10W40
universal smooth running oil for maximum oil change intervals, very good cold start
properties, smooth engine running, very good shearing and ageing properties, modern
additive technology and selected basic oils ensure optimum engine cleanness,
excellent light running and wear protection features
Version synthetic
Specification API CI-4, ACEA E6-10/E7-10, MAN 3277, MB 228.5, Volvo VDS III,
Renault Truck RLD-2, MTU Typ 3, Deutz DQC III-05/IV-05, Scania
LDF-2/LDF-3, Caterpillar ECF-1A/ECF 2
Application range
for heavy-load, exhaust-optimised diesel engines for commercial vehicles, can also be
used in conventional naturally aspirated diesel and turbo diesel engines
Contents Container Order number
20 l Canister 9773 000 031
55 l Barrel 9773 000 032
200 l Barrel 9773 000 033

290
Chemical products

Motor oil
15W40
for long oil-change intervals, KAT-tested, maximum wear protection, excellent ageing
and viscosity stability, all-year motor oil, high-quality basic oils and a modern additive
technology guarantee high power reserves and optimum wear protection characteristics
for long oil change intervals, excellently suitable for vehicles with and without exhaust 3
gas turbocharger
Version mineral
Specification API CI-4/SL, ACEA A3-07/B3-04/E3-96/E5-02/E7-08, Jaso DH-1,

Technical equipment and accessories


MAN M 3275-1, MB 228.3, MB 229.1, Renault RLD-2, MTU Type 2,
MACK EO-M+, Volvo VDSIII, John Deere JDQ 78 a, Caterpillar
ECF-1A/ECF-2, Cummins CES 20076, 20077, 20078, Valtra CR,
Komatsu
Application range
for universal use with a focus on modern diesel engines, but also suitable for a mixed
vehicle fleet
Contents Container Order number
5l Canister 9773 000 002
20 l Canister 9773 000 035
55 l Barrel 9773 000 036
200 l Barrel 9773 000 037

Radiator protection
EP 12
Additive for the radiator, contains no nitrites, amines or phosphates and is silicate-free,
protects the radiator from frost and corrosion, raises the boiling point of water. Can only
be mixed with other G11 and G12 radiator antifreeze agents of the same quality! Can
be used in MB325.3, MAN 324 SNF, VW TL 774 F (Audi, Seat, Skoda, VW), MTU MTL
5048, Porsche Carrera, Boxter, Cayenne. Suitable for aluminium engines. Based on
1,2-ethanediol (monoethylene glycol).
Contents Container Version Order number
1.5 l Bottle - 9198 544 166
5l Canister - 9198 544 168
20 l Canister - 9230 003 102
60 l Barrel incl. drain tap 9230 001 101
200 l Barrel 2" barrel pump connection 9230 002 102

www.europart.net 291
Chemical products

Antifreeze for pneumatic brakes


Wabcothyl
To prevent functional problems in all pneumatic brake systems, protects against
damage caused by ice formation and does not corrode rubber nor metal parts.
Contents Container Order number
1l Bottle 0697 020 874
3 10 l Plastic canister 0697 020 884
30 l Plastic canister 0697 020 894
Technical equipment and accessories

Screen wash
Guaranteed freezing protection up to -60 °C
DEKRA tested, suitable for fan nozzles, suitable for polycarbonate, biodegradable,
methanol-free, not subject to VBF,
Mixing ratio (parts frost protection: water):
2:1 to -30 °C, 1:1 to -20 °C, 1:2 to -10 °C, 1:3 to - 5 °C, undiluted to -60 °C
Hand pump for chemicals and adapter for plastic barrels can be delivered on
request.
Contents Container Order number
1l Bottle 9230 000 100
5l Canister 9230 000 200
20 l Canister 9230 000 403
60 l Barrel 9230 000 500
200 l Barrel 9230 000 603

Accessories
Description Order number
Drain tap for 20 and 60 liter containers 9198 544 160
Drain tap for 200 litre container 9198 544 162

Low-viscosity grease
GLP 00/000
shear-stable lithium-saponified semi-fluid grease, water resistant, oxidation and
corrosion resistant, free of lead, barium and chlorine, offers very good protection
against wear
Temperature resistance -40 to +120 °C
Version wiht lithium soap
Colour light green
Application range
can be used in central lubricating systems as well as for lubrication of gear mechanisms
designation according to DIN 51 826: GP 00 K-40
designation according to ISO/DIS 6743-9: ISO-L-XDCHB 00
Contents Container Order number
15 kg Hobbock 9909 857 703
25 kg Bucket 9909 857 704
50 kg Hobbock 9909 857 705

292
Chemical products

Technical equipment and accessories


Piston pump
Version progressively operated
Operating pressure 300 bar
Voltage 24 V
flow rate per revolution
Order number 9820 015 924 9820 019 240
Type KFG1-5 KFAS1
Container contents kg 2 1
Rate of delivery mm³ 180 200
Scope of supply with container, without control system, pump with container, without control system, pump
element, connection cable, mains adapter and element and connection cable
fill level switch
Accessories
Description Order number
Low-viscosity grease Divinol L 283, 5 kg Cartridge 9909 021 121
Low-viscosity grease Divinol L 283, 15 kg Can 9909 021 120

High-pressure grease
with graphite, NLGI-Class 2
for the lubrication of roller and plain bearings, provides corrosion protection, high
pressure-absorbing properties, seawater-proof
Temperature resistance -30 to +130 °C
Application range
for agricultural machinery, construction machinery, diggers, trucks, tractors, stone-
breakers, articulated trucks, lifts, loading equipment, conveyer belts and water pumps
designation according to DIN 51 825: KPF 2 K-30
designation according to ISO/DIS 6743-9: ISO-L-XCCHB 2
Contents Container Order number
400 g Cartridge 9794 000 015
5 kg Bucket 9794 000 016
25 kg Bucket 9794 000 018

www.europart.net 293
Chemical products

High-pressure grease
with MoS₂
for use as plain and roller bearing grease for high-strain lubricant spots, ensures
improved corrosion protection behaviour

3 Temperature resistance
Colour
-30 to +120 °C, briefly +130 °C
black
Application range
for motor vehicles, devices, machines, conveyer systems, construction machinery etc.
Technical equipment and accessories

designation according to DIN 51 825: KPF 2 K-30


designation according to ISO/DIS 6743-9: ISO-L-XCCHB 2
Contents Container Order number
400 g Cartridge 9230 000 380
5 kg Bucket 9794 000 027
25 kg Bucket 9794 000 029

Permanent grease
suitable for permanent lubrication, excellent corrosion protection, water-resistant, good
adhesive properties, can withstand pressure
Temperature resistance -30 to +120 °C, briefly up to +140 °C
Version wiht lithium soap
Colour blue
Application range
Motor vehicles, industrial machines and equipment
possible description according to DIN 51502: KP2K-30
Contents Container Order number
500 g Screw-type cartridge 9794 000 009

Single-handed grease guns set


for 400 g cartridges and loose grease
Pressure, max. 300 bar
Order number
9534 794 002

294
Chemical products

Permanent grease
universal
shear-stable lithium-complex based grease, water resistant, corrosion and oxidation
resistant, offers very good protection against wear, with high pressure-absorption
capacity
Temperature resistance -30 to +150 °C 3
Colour blue
Application range

Technical equipment and accessories


for the lubrication of rolling contact bearings and plain bearings, on generators, electric
motors, fans etc., also used in wheel hubs and clutch release bearings
designation according to DIN 51 825: KP 2 N-30
designation according to ISO/DIS 6743-9: ISO-L-XCDHB 2
Contents Container Order number
400 g Cartridge 9909 217 112
5 kg Bucket 9909 217 113
15 kg Hobbock 9909 217 114
25 kg Bucket 9909 217 115
50 kg Hobbock 9909 217 116
180 kg Barrel 9909 217 117

Multi-purpose grease
KL 2 K
lithium soap lubricating grease, with a smooth free texture, squeeze-stable, resistant to
oxidation, for use as a grease for plain and rolling contact bearings, ensures improved
corrosion protection behaviour
Temperature resistance -30 to +120 °C, for short periods up to +130 °C
Standard NLGI-Class 2
Version wiht lithium soap
Colour natural
Application range
for motor vehicles, devices, machines, conveyer systems, construction machinery etc.
designation according to DIN 51 825: K 2 K-30
designation according to ISO/DIS 6743-9: ISO-L-XCHHA 2
Contents Container Order number
400 g Cartridge 9794 000 021
5 kg Bucket 9794 000 022
15 kg Bucket 9794 000 023
25 kg Hobbock 9794 000 024
50 kg Hobbock 9794 000 025
180 kg Barrel 9794 000 026

www.europart.net 295
Chemical products

Gear oil
Hypoid SAE 85W-90
maximum pressure absorbing properties, reduces wear and running noise, compatible
with all sealing materials, high-performance high-pressure gear oil, made of carefully
selected basic oils and multi-functional extreme-pressure additives
3 Version mineral
Specification API GL-5, MIL-L-2105 D, Renault GL-5 Axle, Volvo 97310+97316,
DAF, ZF TE-ML 05A/07A/16B/16C/16D/17B/19B/21A,
Voith 3.325-339, MAN 342 M1, MB 235.0
Technical equipment and accessories

Application range
for maximum-load vehicle gears, particularly axle gears with hypoid
Contents Container Order number
1l Bottle 9773 000 000
5l Canister 9773 000 001
20 l Canister 9773 000 015
55 l Barrel 9773 000 016
200 l Barrel 9773 000 017

Gear oil
ATF Dexron IID/IIIG
liquid gear oil, excellent corrosion protection with very high ageing stability, guarantees
perfect functioning of liquid gears even under the most difficult of operating conditions
and large temperature fluctuations
Specification GM Dexron III G, GM Dexron II D, GM Dexron TASA, Ford Mercon
2004, Voith H55.6335.3x, Allison C-4, Caterpillar TO-2, MAN 339
V1/Z1, MB 236.6, Renk, Sperry Vickers, Sundstrand, Volvo 97340,
Volvo 97341*, ZF TE-ML 02F, 03D, 04D, 05L, 09, 11B, 14A
Application range
for use in mechanical manual gearboxes, automatic gears, in torque converters as well
as in power steering where a lubricant of this specification is prescribed
Contents Container Order number
1l Bottle 9773 000 018
20 l Canister 9773 000 019
55 l Barrel 9773 000 020
200 l Barrel 9773 000 021

296
Chemical products

Hydraulic oil
HLP 46
with anti-wear and anti-corrosion additives, based on high-quality mineral oils, meets
the requirements for hydraulic oils according to DIN 51 524 part 2, HLP
Application range
for all hydraulic systems where HLP oils are recommended, for hydraulic controllers 3
and torque converters, for precision hydraulics and lifting equipment, for hydraulic
systems where high thermal loads can occur

Technical equipment and accessories


Contents Container Order number
1l Bottle 9773 000 022
5l Canister 9773 000 023
55 l Barrel 9773 000 024
200 l Barrel 9773 000 025

Brake fluid
DOT 4
high-grade synthetic brake fluid which has been especially developed for use in brake
systems with drum and/or disc brakes, suitable for all hydraulic car brake and coupling
systems, except for systems using mineral oil, can be mixed with all brake fluids that
meet the same requirements
Specification complies with: FMVSS 116 DOT 4 (Federal Motor Vehicle Safety
Standard), SAE J 1703, ISO 4925
Wet boiling point 170 °C
Dry boiling point 260 °C
Also suitable for vehicles with ABS.
Contents Container Order number
1l Bottle 9785 000 015
5l Canister 9785 000 016
20 l Canister 9785 000 017
60 l Barrel 9785 000 018

www.europart.net 297
Chemical products
Battery acid
To "activate" (prime) dry pre-charged batteries!
specific weight of 1.28 kg/l
Contents Container Order number
35 kg Canister 9560 000 150
75 kg Canister 9560 000 140

3
Technical equipment and accessories

Urea solution
AdBlue®, for reduction of the NOx emission
Contents Container Order number
10 l Canister 9066 170 007
210 l Barrel 9066 170 200

Urea solution
AdBlue®, for reduction of the NOx emission
To keep new emission regulations defined by the EU, diesel vehicles are equipped
with SCR technology (selective catalytic reduction). In the SCR process, the high NOx
emissions that are produced during optimised combustion in the engine are
post-treated in a catalytic converter. The reducing agent AdBlue® is necessary for this
process, it is a non-toxic and odourless urea solution, in an exactly defined
concentration. AdBlue® is sprayed in an exactly defined dosage through nozzles into
the exhaust flow, where it hydrolises and then causes conversion of the nitrogen
oxides (NOx) into nitrogen (N) and water (H2O).
Scope of supply
without the pump unit shown
The 1000 l container can be collected free of charge
Contents Container Order number
1,000 l Container 9066 170 008

Accessories
Description Order number
Tank pump with automatic petrol pump nozzle 9066 170 010

298
Chemical products
Tank pump
Basic pump without meter
suitable for 1000 l container
Rate of delivery 40 l/min
Version with manual petrol pump nozzle
Order number
9066 170 014
3

Technical equipment and accessories


Pump nozzle
for AdBlue® urea solution
suitable for Basic pump
Version manual
Order number
9066 170 030

Tank pump
for AdBlue® urea solution
Low risk of contamination with AdBlue®, suitable for IBC and barrels
Version With adjustable speed
Length of tube 1150 mm
Voltage 220-240 V
Order number
9539 488 600

Accessories
Description Order number
Flow counter 9539 488 601
Pump nozzle, Type 0204-450 9539 488 602
Adapter, Type BCS 56 x 4 9539 488 610
Adapter, Type G 2" 9539 488 611
Adapter, Type BCS 70-6 9539 488 612
Test strips for detecting diesel and oils in AdBlue® 9682 202 412

www.europart.net 299
Reference list
A
ABS mini sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70, 71
ABS mini sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187
Accessories set for Navigator TXTs . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 285
Accessories set for brake maintenance unit . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 289
Additional headlamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84, 85
Additional headlamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
Add-on set for exhaust turbocharger . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Aero package for driver's cab . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112, 113
Air deflector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Air deflector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
Air dryer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60, 61
Air dryer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182, 183
Air filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Air filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
Air horn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 238
Air horn kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 238
Air reservoir tensioning strap . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Air reservoir tensioning strap . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
Air spring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 35
Air spring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
Air spring bellows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Air-conditioning compressor . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Air-conditioning compressor . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220
Alternator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Alternator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205
Antifreeze for pneumatic brakes . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 292
Assembly jig . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 287
Assortment case for VOSS connector system 230 . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Assortment case for VOSS connector system 232 . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Assortment case for VOSS connector system 230 . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194
Assortment case for VOSS connector system 232 . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195
Axle leg bolt press . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 279
Axle leg bolt press set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 280
Axle nut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Axle nut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
B
Ball joint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39, 40
Ball joint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167, 168
Ball joint extraction tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 273
Basic set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 270
Battery acid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 298
Battery charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 276
Bit assortment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 270
Blower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Blower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222
Blowoff valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62, 64
Blowoff valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
Bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
Booster heating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Reference list
Booster heating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224
Bottle cooler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 248
Brake anchor plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Brake anchor plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
Brake caliper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52-55
Brake caliper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178, 179
Brake camshaft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Brake disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Brake disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
Brake drum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Brake drum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
Brake fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 297
Brake lining set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Brake lining set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
Brake maintenance unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 288
Brake pad rivet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Brake pad rivet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
Brake pad sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Brake pad set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51, 52
Brake pad set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177, 178
Brake shoe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Brake spring pliers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 275
Bulb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . 253, 254
Bumper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97-100
Bumper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206, 207
C
Cabin filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
Cabin filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222
Case for hazardous goods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 267
Central silencer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-20
Central silencer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150, 151
Charge air cooler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Charge air cooler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Charge air hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Charge air hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Clearance light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Clearance light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200
Clutch actuator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Clutch actuator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190
Clutch kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27-29
Clutch kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156-158
Clutch master cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Clutch master cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190
Clutch servo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Clutch servo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191
Combination brake cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 73
Combination brake cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189, 190
Compact bearing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Compact bearing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
Complete mirror system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Compressed air tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64, 65

www.europart.net
Reference list
Compressed air tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184
Compressor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Compressor cool box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 246
Compressor cooling unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Compressor cooling unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205
Condenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Condenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221
Connecting rod bearing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Connecting rod bearing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
Continuous pressure fire extinguisher . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 268
Cool box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . 246, 247
Coolant control valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Coolant control valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222
Coupling head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Coupling head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
Crankcase seal set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Cylinder head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Cylinder head gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Cylinder head gasket set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 6
Cylinder head gasket set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
Cylinder head screw set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Cylinder head screw set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
Cylinder liner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
D
Deflection pulley/guide pulley . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Deflection pulley/guide pulley . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
Diagnosis interface unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 285
Diagnosis unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 286
Disconnecting pliers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 283
Door extension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105, 106
Door handle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Door handle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
Double shut-off valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Double-ended ring spanner set . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 270
Double-joint drive shaft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Double-joint drive shaft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
Drag-link . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Drag-link . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164, 166
Driver cab tilt cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
Driver cab tilting pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
Driver cab tilting pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229
E
EBS axle modulator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186
EBS central brake unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
EBS foot brake module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
EBS single channel module . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
EBS trailer control valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186
EBS trailer modulator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
EBS two channel module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
ECAS operating unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
ECAS operating unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193
Reference list
ECAS path sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
ECAS path sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
ECAS solenoid valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77, 78
ECAS solenoid valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192, 193
Electric motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Engine bearing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Engine bearing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
Engine gasket set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 5
Engine piston . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Engine radiator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Engine radiator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Entry box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101-103
Entry box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208
Evaporator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Evaporator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221
Exhaust turbocharger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-14
Exhaust turbocharger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Exhaust-manifold gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Expansion valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Expansion valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221
F
Fan wheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Fan wheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Fast-action coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Fastening clamp for headlight . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
Fastening clamp for headlight . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231
Fifth wheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . 234, 236
Filing table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131-133
Filing table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227
Filling and bleeding device . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 282
Filter dryer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Filter dryer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221
Filter wrench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 271
Fire extinguisher box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 269
Floor mat set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
Floor mat set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227
Flywheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25-27
Flywheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
Flywheel adaptation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 287
Four-circuit protection valve . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Four-circuit protection valve . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
Four-point link . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Front flap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Front flap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
Front mirror . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121, 122
Front mirror . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218
Front trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Fuel filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Fuel filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146, 147
Fuel pipe repair kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 282
Fuel tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22, 23

www.europart.net
Reference list
Fuel tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152, 153
G
Gas spring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
Gas spring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228, 229
Gear oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 296
Generator regulator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Grille protective cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 269
Grooved ball bearing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Grooved ball bearing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
H
H1 halogen headlamp bulb . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 252
H1 rotating beacon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . 261, 262
H1 spotlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
H1 spotlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231
H3 halogen headlamp bulb . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 252
H3 worklight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories . . . . . . . . . . . . . 256-258
H4 halogen headlamp bulb . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 252
H7 halogen headlamp bulb . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 253
H7 main headlamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82, 83
H7 main headlamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
Hand brake valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Hand brake valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
Hand feed pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Hazard warning light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 259
Headlight bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138-140
Headlight bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230, 231
Heat exchanger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Heat exchanger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220
High performance grease . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 236
High-pressure grease . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . 293, 294
High-pressure pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Hydraulic filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Hydraulic filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
Hydraulic oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 297
I
Impact driver socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 272
Impact socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 271
Indicator light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85, 86
Indicator light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198, 199
Indicator switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92, 93
Indicator switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204
Inner ring for drive shaft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Inner ring for drive shaft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
Intake-manifold gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Interface cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 285
K
Kettle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 248
L
Leak detector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 280
LED beacon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . 260, 261
LED daytime running lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Reference list
LED daytime running lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204
LED daytime running lights set . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
LED daytime running lights set . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204
LED position light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
LED side marker light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87, 88
LED side marker light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199
LED working floodlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 255
Low-viscosity grease . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 292
M
Main mirror . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119, 120
Main mirror . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216-218
Maintenance flap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Marking board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 263
Marking board set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 263
Membrane brake cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Membrane brake cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188
Microwave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 247
Motor oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . 290, 291
Motor turning gear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 275
Muffler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Muffler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191
Multi-purpose grease . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 295
N
Non-return valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Number panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 264
Numberplate lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Numberplate lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202
Numeral set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 264
O
Oil cooler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Oil filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Oil filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
Oil filter cap set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 289
Oil pan gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 8
Oil pan gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144, 145
Oil pressure sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Oil pressure sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
Oil pressure tester . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 273
Overflow valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Overflow valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187
P
Pan for deflector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Pan for deflector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
Parabolic spring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32, 33
Parabolic spring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160, 161
Parking warning sign . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . 264, 265
Pedal pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
Pedal pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227
Percolator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 248
Permanent grease . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . 294, 295
Pin and groove nut set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 274

www.europart.net
Reference list
Pipe connection key set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 273
Piston pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 293
Piston ring cable tie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 274
Piston ring pliers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . 274, 275
Poly-V belt tensioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Poly-V belt tensioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
Position light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Position light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201
Powder fire extinguisher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 268
Power-steering pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Power-steering pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
Pressure switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Pressure switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191
Promotion package Navigator TXTs with IDC4 Truck . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 284
Pry bar set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 271
Pump nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 299
R
Radiator fan coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Radiator fan coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
Radiator pressure test tool set . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 273
Radiator protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 291
Ramp mirror . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Ramp mirror . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220
Rapid bleeder valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Rear light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90, 91
Rear light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201, 202
Rear silencer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-21
Rear silencer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151, 152
Rechargeable fire extinguisher . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 268
Reflective tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 266
Relay valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Relay valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187
Release fork . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Release fork . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
Repair kit Compressed air . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 281
Repair kit for "A" frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Repair kit for axle strut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Repair kit for axle strut, trailing arm . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
Repair kit for brake callipers . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Repair kit for brake shaft bearing . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Repair kit for central joint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Repair kit for drive shaft bearing . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Repair kit for drive shaft bearing . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
Repair kit for pulse wheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
Repair kit for stabiliser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Repair kit for trailing arm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Repair kit for transverse link . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
Repair kit for wheel hub . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Repair kit kingpin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42, 43
Repair kit kingpin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
Repair kit Truck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 281
Reference list
Resistor for interior blower . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222
Reversing video system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 245
Ribbed V-belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Ribbed V-belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
Ribbed V-belt set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Rim lining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 242
Rim ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 242
Roof spoiler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113, 114
Roof spoiler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213
Roof-mounted air-conditioning system for truck . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
Roof-mounted air-conditioning system for truck . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223
S
Screen wash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 292
Sealing ring set for cylinder liner . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Seat covering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130, 131
Seat covering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226
Secondary air filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Shaft sealing ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Shaft sealing ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
Shock absorber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36, 37, 134
Shock absorber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163, 228
Short-circuit and interruption detector . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 280
Side marker light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Side window wind deflector . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Side window wind deflector . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214
Signal horn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 238
Single-handed grease guns set . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 294
Skirting protection bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136, 137
Skirting protection bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230
Skirting protection mini-brush . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Slack adjuster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57, 58
Slack adjuster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
Socket set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 272
Socket wrench insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . 271, 272
Solenoid control valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Solenoid control valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187
Solenoid valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Solenoid valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186
Spotlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Spring hoop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33, 34
Spring hoop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160, 162
Spring leaf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Spring leaf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
Stabiliser bearing section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Stabiliser bearing section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
Stabilizer mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40, 41
Stabilizer mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
Start booster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 277
Starter battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . 249, 250
Starter Motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Starter Motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205

www.europart.net
Reference list
Steering Track Rod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38, 39
Steering Track Rod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166, 167
Step-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Step-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
Storage for drive shaft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Storage for drive shaft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
Stud accessories set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 279
Sunshade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Sunshade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214
Switching device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
T
Tank pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 299
Tapered roller bearing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Tarpauling repair set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 265
Test case for Denoxtronic I and II AdBlue® systems . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 278
Test device for measuring AdBlue® . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 279
Test strips for detecting diesel and oils in AdBlue® . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 278
Thermostat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Thermostat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Toolbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 237
TORX® bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
TORX® bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
Trailer control valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Trailer control valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186
Trailer hitch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . 236, 237
Trailing arm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Trailing arm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173, 174
Transverse link . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
Truck driver's seat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128, 130
Truck driver's seat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225, 226
Truck split air conditioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Truck split air conditioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224
U
Unlocking tool set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 288
Urea filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Urea filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
Urea solution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 298
V
Valve cover gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 9
Valve cover gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
V-belt kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
Vehicle bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 269
W
Warning flash lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 267
Warning panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 263
Washer fluid pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Washer fluid pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215
Water pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15, 16
Water pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Wheel bearing set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Wheel bearing set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170, 171
Reference list
Wheel bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Wheel bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
Wheel cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories . . . . . . . . . . . . . 239-242
Wheel hub . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Wheel hub . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
Wheel hub cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . 243, 244
Wheel nut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Wheel nut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
Wheel nut cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 243
Wheel stud cover ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Technical equipment and accessories. . . . . . . . . . . . . . . . . . 243
Wide angle mirror . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Wide angle mirror . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219
Wind deflector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Wind deflector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210
Windscreen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Wing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109-111
Wing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211-213
Wing cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Wing extension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104-107
Wing extension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209, 210
Wiper blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Wiper blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214, 215
Wiper motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Wiper motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215
Wiper rods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Wiper rods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215
Working cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGX, TGS, TGA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Working cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TGM, TGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191

www.europart.net
Find your nearest EUROPART sales
outlet on the Internet at:
www.europart.net

● Jekaterinenburg
● Irkutsk
● Krasnojarsk
● Novosibirsk
● Tjumen
EUROPART ranges for vehicle workshops:

Truck spare parts Trailer spare parts Light commercial Bus spare parts
spare parts

Vehicle parts
Passenger car
parts

Fastening systems Workshop utilities Operational safety and Chemical-technical


environmental protection products

Workshop
requirements Tools

EUROPART Trading GmbH


www.europart.net

You might also like