Solidworks1 171128203129 PDF

Submitted to: Submitted by:
Head of Department of Mechanical Engg Pankaj Kumar (75144042)

Maharishi Markandeshwar University B. Tech. (Mech.) 7th Sem
Sadopur, Ambala
 About Dassault Systèmes  About Autodesk
 About SolidWorks  About AutoCAD
 SolidWorks Screen  AutoCAD Screen
 SloidWorks Model
 Co-ordinate System
 Status of a Sketch
 Draw Toolbar
 Sketch Command
 Modify Toolbar
 Toolbar
 View Orientation  Dimension Toolbar
 Standard View  Hatching
 Display Modes  Layers
 Examples of Shape Features  Block
 Assembly Design
 Isometric Drawing
 My Projects
 Benefits of Solidworks
 Dassault Systèmes, "The 3DEXPERIENCE Company", is a French
multinational software company that develops 3D design, 3D digital
mock-up, and product lifecycle management (PLM) software.
 A subsidiary of the Dassault Group created in 1981 by Avions

Marcel Dassault.
 Headquarter - Vélizy-Villacoublay, France
 CEO - Bernard Charlès
 No. of employees - 13,974

 SolidWorks is a solid modeling computer-aided design (CAD)
and computer-aided engineering(CAE) computer program that runs
on Microsoft Windows.
 SolidWorks is published by Dassault Systèmes.
 Over two million engineers and designers at more than 165,000
companies were using SolidWorks as of 2013
 Founded in December 1993 by Massachusetts Institute of
Technology graduate Jon Hirschtick
 Its first product SolidWorks 95, in November 1995.
 Latest released SolidWorks 2017 in September 19, 2016

 The SolidWorks model is made up of:
› Parts - 2D design (Sketch) , 3D design
(Features) , Part design consider in the
part design section
› Assemblies - Assembling of two or more
than two parts consider in
this section
› Drawings - Designing with standards is
consider in the drawing
section
 Under defined
› Additional dimensions or relations
are required.
› Under defined sketch entities are
blue (by default).
 Fully defined
› No additional dimensions or
relationships
are required.
› Fully defined sketch entities are
black (by default).
 Over defined
› Contains conflicting dimensions or
relations, or both.
› Over defined sketch entities are
red (by default).
 Line
 Circle
 Arc
 Ellipse
 Rectangle
 Spline
 Fillet
 Slot
 Extrude  Revolve Cut
 Swept  Pattern
a. Linear Pattern
 Revolve
b. Circular Pattern
 Loft  Shell
 Extruded Cut  Rib
 Lofted Cut  Draft
 Changes the view display to correspond to one of the
standard view orientations.
Front Top
Right Left
Bottom Back
Isometric Normal To
(selected plane
or planar face)
Isometric
View
Top View
Back View Left View Front View Right View
Bottom View
Illustrate the part in various display modes.
Wireframe Hidden lines Hidden Lines Shaded Shaded With

Visible Removed Edges
 Base Feature
 Boss feature
 Cut feature
 Hole feature
 Fillet feature Base Feature
 Chamfer feature
 Revolved Base Feature
 Shell feature
 Sweep Features
 Loft feature Boss feature
Cut feature Hole feature
Fillet Feature
Revolve
Sweep
Loft
Linear Pattern Circular Pattern
Shell Feature
 An assembly design consists of two or more
components assembled together at their
respective work positions using parametric
relations.
 All components are created as separate part
documents, and then they are placed and
referenced in the assembly as external
components.
Drawing Drawing
 Maximize the productivity of your design and engineering
resources to create products better
 Faster and more cost-effectively
 Built-in intelligence takes the guess work out of 3D design
 Easily manage product data, share designs, automate
workflows, and securely share design data across your
organization, with clients, and with external partners
 Autodesk, Inc. is an American multinational software
corporation that makes software for the architecture,
engineering, construction, manufacturing, media,
and entertainment industries.
 Headquartered in San Rafael, California
 Founded in 1982 by John Walker
 CEO - Andrew Anagnost
 9,000+ Employees
 AutoCAD is a commercial computer-aided design
(CAD) and drafting software application.
 AutoCAD Version 1.0 was first released in December 1982.
 Released in India in 1988.
 AutoCAD is used across a wide range of industries, by
architects, project managers, engineers, graphic designers,
and many other professionals.
 Latest release is AutoCAD 2018 in March 21, 2017.
 AutoCAD used in various discipline:
 AutoCAD Architecture
 AutoCAD Civil
 AutoCAD Electrical
 AutoCAD ecscad
 AutoCAD Map 3D
 AutoCAD Mechanical
 AutoCAD MEP
 AutoCAD Structural Detailing
 AutoCAD Utility Design
 AutoCAD P&ID
 AutoCAD Plant 3D
 Absolute co-ordinates - Using
this method, you enter the points
as they relate to the origin of the
WCS.
 Relative coordinate - A relative
coordinate is a point specified
with reference to the last point
specified.
 Polar coordinate - Polar
coordinates use a distance and
an angle to locate a point.
1. Line
2. Polyline
3. Rectangles
4. Polygon
5. Circle
6. Arc
7. Spline
8. Ellipse
9. Hatch
1. Offset
2. Copy
3. Mirror
4. Array
i. Rectangular array
ii. Path array
iii. Polar array
5. Move
6. Rotate
7. Trim Rectangular
8. Scale
9. Extend
Path Polar
10. Fillet
11. Join Array
12. Explode
1.Chamfer 2. Fillet
3.Copy 4. Mirror
5. Scale 6. Array
7.Extend 8.Join
1. Linear Dimension
2. Aligned Dimension
3. Angular Dimension
4. Radial Dimension
5. Arc Dimension
6. Diameter Dimension
7. Jogged Dimension
8. Ordinate Dimension
9. Continue Dimension
10. Baseline Dimension
11. Annotation with Leaders
Hatching is used to
add shaded patterns
to objects and
shapes.
You can pick:

 Pattern
 Scale
 Angle
 points
 Layers are the primary method for
organizing the objects in a drawing by
function or purpose.
 Layers can reduce the visual
complexity of a drawing and improve
display performance by hiding
information that you don’t need to see
at the moment.
 With layers, you can
› Associate objects by their function
or location
› Display or hide all related objects in
a single operation
› Enforce linetype, color, and other
property standards for each layer
 A block is a collection of objects that are
combined into a single named object.
 Block is an individual drawing file.
 You can create several drawing files, which
are sometimes called block library drawings
 Isometric drawings are not actual 3D drawings,
they are made with 2D geometries but they
appear like 3D.
 Isometric drawing can be made by tilting viewing
angle to 30 degrees for all of its sides in the 2D
plane.
 F5 key is pressed to select isometric plane.
 The three Isoplanes available for selection are
Isoplane top, right and left.

Solidworks1 171128203129 PDF

Uploaded by

Copyright:

Available Formats

Solidworks1 171128203129 PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Solidworks1 171128203129 PDF

Uploaded by

Copyright:

Available Formats

Submitted to: Submitted by:

Head of Department of Mechanical Engg Pankaj Kumar (75144042)

 A subsidiary of the Dassault Group created in 1981 by Avions

 Headquarter - Vélizy-Villacoublay, France

 CEO - Bernard Charlès

 No. of employees - 13,974

and computer-aided engineering(CAE) computer program that runs

 SolidWorks is published by Dassault Systèmes.

 Over two million engineers and designers at more than 165,000

companies were using SolidWorks as of 2013

 Founded in December 1993 by Massachusetts Institute of

Technology graduate Jon Hirschtick

 Its first product SolidWorks 95, in November 1995.

 Latest released SolidWorks 2017 in September 19, 2016

Back View Left View Front View Right View

Wireframe Hidden lines Hidden Lines Shaded Shaded With

You can pick:

You might also like