Scribd Logo
Upload

Welcome to Scribd!

  • 669 views

    Epilux 610 HBLD Primer Coating: Resistance Guide Product Data

    Uploaded by

    Bijaya Raula
    This document provides information on the Epilux 610 HBLD PRIMER COATING product. It is a two-pack, epoxy high build primer meant for structural steel, pipelines, equipment and tanks in industrial environments. It offers excellent anti-corrosive properties and water impermeability. The primer requires abrasive blast cleaning of steel surfaces to Sa 2.5 and can be overcoated with epoxy or polyurethane topcoats. It has good resistance to acids, alkalis, solvents, salt and water once fully cured.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Epilux 610 HBLD Primer Coating: Resistance Guide Product Data

    Uploaded by

    Bijaya Raula
    669 views2 pages
    This document provides information on the Epilux 610 HBLD PRIMER COATING product. It is a two-pack, epoxy high build primer meant for structural steel, pipelines, equipment and tanks in industrial environments. It offers excellent anti-corrosive properties and water impermeability. The primer requires abrasive blast cleaning of steel surfaces to Sa 2.5 and can be overcoated with epoxy or polyurethane topcoats. It has good resistance to acids, alkalis, solvents, salt and water once fully cured.

    Original Title

    Epilux_610_HBLD_Primer_Coating

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information on the Epilux 610 HBLD PRIMER COATING product. It is a two-pack, epoxy high build primer meant for structural steel, pipelines, equipment and tanks in industrial environments. It offers excellent anti-corrosive properties and water impermeability. The primer requires abrasive blast cleaning of steel surfaces to Sa 2.5 and can be overcoated with epoxy or polyurethane topcoats. It has good resistance to acids, alkalis, solvents, salt and water once fully cured.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    669 views2 pages

    Epilux 610 HBLD Primer Coating: Resistance Guide Product Data

    Uploaded by

    Bijaya Raula
    This document provides information on the Epilux 610 HBLD PRIMER COATING product. It is a two-pack, epoxy high build primer meant for structural steel, pipelines, equipment and tanks in industrial environments. It offers excellent anti-corrosive properties and water impermeability. The primer requires abrasive blast cleaning of steel surfaces to Sa 2.5 and can be overcoated with epoxy or polyurethane topcoats. It has good resistance to acids, alkalis, solvents, salt and water once fully cured.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    EPILUX 610 HBLD PRIMER COATING

    USES
    An epoxy high build primer meant for application in both projects and maintenance requirements on structural steel, pipeleines,
    equipments, tanks in diverse industrial, chemical and marine environments. It is suitable for use as a primer in Fertilizer plants,
    Refineries, Petrochemicals, Pharmaceuticals and other industries.

    SCOPE
    A specially designed high build anticorrosive primer which cures to a hard and tough film offering excellent anticorrosive property.
    The product possesses high corrosion resistance as well as excellent water impermeability. It can be overcoated with epoxy or
    polyurethane top coats.

    PRODUCT DATA RESISTANCE GUIDE


    Type : Two Pack, cured with Polyamide Chemical Resistance :

    Composition : Catalysed epoxy resin with redoxide and Splash and Mild Fumes/outdoor
    EXPOSURES
    zinc phosphate anticorrosive pigments spillage resistance

    Mixing Ratio : Base : Catalyst - 10.1 by volume Acids Good Good


    Application : Brush or Airless spray Alkalis Good Good
    0
    Pot Life : 4 to 6 hours @ 27 ± 3 C Solvents Very Good Very Good
    Recommended DFT : 80 - 100 microns per coat Salt Very good Very good
    Corresponding WFT : 133 - 167 microns per coat Water Very Good Very Good
    Theoretical Spreading Rate : 6.0 – 7.5 sqmt/ltr/coat

    Drying Time : Temperature Resistance :


    0
    TOUCH : 2 Hours Continuous: 93 C
    HANDLE : 8 Hours Intermittent: 1200C
    HARD : Overnight
    Curing Time : 7 days Weatherability: Very Good with suitable top coat
    Overcoating Interval : Flexibility : Good
    MIN : Overnight Abrasion Resistance : Good
    MAX : seven days
    0
    Flash Point : Above 25 C
    Colour : redoxide
    Finish : Matt DATA SHEET # 198
    Packing : 11 Ltrs Issue Date: April 2009
    Thinner/Cleaner : Thinner 844

    Storage Life : Upto nine months as long as the sealed


    containers are kept under cover in a dry place under
    normal temperature conditions.
    Epilux 610 HBLD Primer Coating

    SURFACE PREPARATION

    Steel : Remove grease, oil and other contaminants preferably by using a degreasing solvent. Abrasive blast clean to a
    minimum Sa 2.5 Swedish Standards SIS 05 5900. For severe corrosive conditions, abrasive blast to Sa3 with a surface profile
    not exceeding 55 microns. The surface should be clean and dry before application of Epilux 610 HBLD Primer Coating.

    APPLICATION
    Stir the base thoroughly and then mix ten parts of base and one part of catalyst by volume to uniform consistency. Allow the
    mixture to mature for 30 minutes and stir again before use and during application. Brush - Apply without thinning.
    Spray : With Conventional spray, maximum of 15% thinner may be added and maintain atomizing pressure of 3.5 to 4.9
    2
    Kg/cm . Incase of Airless Spray, apply preferably without thinning; however, upto 5% Thinner 844 may be added if
    absolutely essential depending on conditions. Use any standard equipment having pump ratio 40:1. Tip Size 0.38 - 0.48 mm.
    2
    Tip Pressure 140 - 165 Kg/cm .
    TYPICAL PAINTING SPECIFICATIONS

    Surface 1st Coat 2nd Coat 3rd Coat 4th coat

    Epilux 4 CR Enamel / Epilux 4 CR Enamel or


    Epilux 610 HBLD Primer Epilux HB MIO
    Steel Epilux 155 HB / Epilux 155 HB or
    Coating Coatings
    Bergerthane Finish Bergerthane Finish
    Epilux 950 Super HB/ Epilux 950 Super HB/
    Epilux 610 HBLD Primer
    Steel Epilux Durebild FRE Epilux Durebild FRE
    Coating
    Coating Coating

    Epilux 5 CTE / Epilux Epilux 5 CTE / Epilux 555


    -do- -do- Epilux HB MIO Coating
    555 CTE CTE

    1. Use off the mixed paint within the stipulated pot life period.
    2. Do not apply when temperature falls below 10 0C or rises above 50 0C and when relative humidity rises above 90% or
    during rain, fog or mist.
    3. Brushes and spray equipment should be cleaned withThinner 844 otherwise equipment is likely to be damaged.

    Health & Safety : Please refer to the separate safety data sheet available with detailed information.

    DISCLAIMER
    The information contained within this Data Sheet is based on information believed to be reliable at the
    time of its preparation. The Company will not be liable for loss or damage howsoever caused including
    liability for negligence, which may be suffered by the user of the data contained herein. It is the users' Data Sheet # 198
    responsibility to conduct all necessary tests to confirm the suitability of any product or system for their Issue Date: Apr 2009
    intended use. No guarantee of results is implied since conditions of use are beyond our control.

    BERGER PAINTS INDIA LIMITED Berger House,129 Park Street, Kolkata 700017
    Phone : (033) 2229 9724 (5 lines) / 2249 9754 (4 lines) Fax : 91-33-2249 9729 / 2249 9009
    Email : NORTH : [email protected] SOUTH : [email protected]
    EAST : [email protected] WEST : [email protected]

    You might also like