COSWP-RA Guidance

Code of Safe Working Practices for Merchant Seamen (COSWP) -2015
Section 1.2.5 – Risk Awareness and Risk Assessments
Risk awareness
If seafarers are fully informed and aware of the risks to their health, safety and welfare, they
are much more likely to ensure they avoid the risks and remain safe.
This knowledge is attained through risk assessment and in other ways throughout our lives including
training in theory and practical application, information, observation, instructions, supervision and
personal experience.
We can improve the quality and usefulness of the information available by effective knowledge
management, which is covered in section 1.2.8.
Key terms
A hazard is a source of potential injury, harm or damage. It may come from many sources,
e.g. situations, the environment or a human element.
Risk has two elements:

1 The likelihood that harm or damage may occur.
1 The potential severity of the harm or damage.
A key tool in ensuring that all involved in the work have a clear understanding and awareness
of any hazards and their associated risks is the carrying out of a toolbox talk before the work
commences.
Application of the knowledge in the workplace is influenced by our values, beliefs, attitudes
and behaviours and by the views of others. This is facilitated by ensuring a safe working
culture (see section 1.2.7).
Risk assessment
The risk assessment process identifies hazards present in a work undertaking, analyses the
level of risk, considers those in danger and evaluates whether hazards are adequately
controlled, taking into account any measures already in place.
Effective risk assessments:

1 correctly and accurately identify all hazards;
1 identify who may be harmed and how;
1 determine the likelihood of harm arising;
1 quantify the severity of the harm;
1 identify and disregard inconsequential risks;
1 record the significant findings;
1 provide the basis for implementing or improving control measures; and
1 provide a basis for regular review and updating.
Potential language difficulties should be taken into account. Temporary staff or those new to
the ship or the Company who are not fully familiar with the safety management system or
other operational details should be considered where relevant.
Other seafarers who should be given special consideration include young persons and pregnant
seafarers.
Any risk assessment must address risks to the occupational health and safety of seafarers.
Advice on assessment in relation to using personal protective equipment, manual-handling
operations and using work equipment is given in Chapters 8, 10 and 18. In addition, specific
areas of work involving significant risk, and recommended measures to address that risk, are
covered in more detail in later chapters of the Code.
The assessment of risks must be ‘suitable and sufficient’ but the process need not be
overcomplicated. This means that the amount of effort that is put into an assessment should
depend on the level of risks identified and whether those risks are already controlled by
satisfactory precautions or procedures to ensure that they are as low as reasonably practicable.
The assessment is not expected to cover risks that are not reasonably foreseeable.
There are no fixed rules about how risk assessment should be undertaken. The assessment
will depend on the type of ship, the nature of the operation, and the type and extent of the
hazards and risks. The intention is that the process should be simple, but meaningful. The
relevant legislation regarding risk assessments should be referred to when deciding on what
methodology will be employed. There is a requirement that seafarers must be informed of any
significant findings of the assessment and measures for their protection, and of any
subsequent revisions made. It is therefore advisable that copies are carried on board each
vessel and that there is a process for regular revisions to be carried out. In particular, the risk
assessment must be reviewed and updated as necessary, to ensure that it reflects any
significant changes of equipment or procedure or the particular circumstances at the time, e.g.
the weather or level of expertise of those carrying out the task.
Risk assessment should be seen as a continuous process. In practice, the risks in the
workplace should be assessed before work begins on any task for which no valid risk
assessment exists.
A very effective approach that is employed by some companies is to use a four-level process,
as outlined below.
Risk assessment level 1

The ISM Code requires that the safety management objectives of the Company should,
amongst other things, assess the risks associated with all identified hazards in respect of its
ships, personnel and the environment, and establish appropriate safeguards.
These risk assessments, sometimes known as generic risk assessments, should therefore be
carried out at a high level in the Company with appropriately knowledgeable and experienced
personnel, and the results used to ensure that appropriate safeguards and control measures are
contained within the Company’s safety management system in the form of policies,
procedures and work instructions.
Risk assessment level 2: task based

In addition to the general requirements under the ISM Code, the Merchant Shipping and
Fishing Vessels (Health and Safety at Work) Regulations 1997 require that a suitable and
sufficient assessment shall be made of the risks to the occupational health and safety of
seafarers arising in the normal course of their activities or duties.
There are vessel- and task-specific risk assessments that must be carried out on board each
vessel. Whilst it is clear that the Company can assess the generic risk of, for example,
working at height, working with electricity, movement about ship, etc., it is not possible for
them to conduct a risk assessment for changing a navigation light bulb up the main mast on a
given vessel on a given day because they would not be able to take into account all the factors
that were applicable at that time on that vessel. For this reason, it is essential that any generic
risk assessments are used in context, and not seen as being suitable for specific tasks. For this,
task-based risk assessments (TBRAs) should be carried out on board each vessel by those
involved in the work.
Two distinct types of TBRA may be used. First, a range of vessel-specific generic TBRAs
that can be used for all routine and low-risk tasks can be developed. These should be
periodically reviewed, but frequency would very much depend on the particular
circumstances on the vessel and the level of risk.
The second type of TBRA would be used for specific high-risk jobs that are not routine, such
as working aloft or enclosed space entry. These should relate to the specific persons who will
be involved in the work and valid only for the duration of that job.
In both cases, the assessments should be carried out by a competent person or persons who
understand the work being assessed. It is also preferable that seafarers who will be involved
in the work should also be involved in the assessment process.
Risk assessment level 3: toolbox talk

A toolbox talk is another form of risk assessment carried out in support of a TBRA. Its prime
purpose is to talk through the procedures of the job in hand and the findings of the TBRA
with the seafarers involved.
When carrying out a toolbox talk, it is important to actively involve those carrying out the
work and others who may be at risk, i.e. seafarers, sub-contractors and others on board ship
who may be affected by the work. Full and active participation should be encouraged and any
questions or concerns discussed and taken into consideration. Once finished, confirm that all
fully understand their role in the task and the precautions in place (‘closed-loop
communication’). This should then be recorded along with details of any relevant risk
assessment referred to.
A toolbox talk should be conducted prior to any work being carried out that involves more
than one person and where there is significant risk to persons or assets.
Risk assessment stage 4: personal assessment of risk

This is an informal assessment of day-to-day risks carried out as you are going about your
work and life in general. It is a technique used to ensure that we perform even the most
mundane of tasks without getting hurt. It is used to maintain awareness of our environment at
all times and aid in the identification and control of immediate hazards as we go about our
work. Use of personal assessment of risk should be developed and encouraged.
This is about taking a few minutes to step back, look at the job to be done, consider what
could go wrong and how it may occur, and what steps you can personally take to avoid any
incident occurring. As the work is proceeding, you should also monitor the worksite for any
change in conditions that might alter the hazards and controls in place. If there is any concern,
stop the work, re-assess the controls and, if necessary, re-plan and re-assess the task.
This approach may also be called a ‘dynamic risk assessment’. If the person does not believe
that the dynamic risk assessment is sufficient move back to stage 2.
Every task carried out on board the vessel should be subject to risk assessment. This does not
mean that a risk assessment needs to be written every time a simple task is carried out, but the
existing risk assessment must be referred to as part of a toolbox talk (stage 3) before the task
can commence to ensure that the hazards and controls are fully understood, still relevant and
appropriate.
Once the task commences, it is important to monitor the work site for any changes in
conditions that might alter the hazards and controls in place. If there is any concern, stop
work authority should be used.
In all cases, on completion of the task, it is important to record or feedback any lessons
learned and make improvements for next time including, where appropriate, reviewing and
updating existing risk assessments. Everyone should be encouraged to contribute.
It is recommended that a proactive hazard-reporting system with empowerment and
expectation for immediate corrective action is also in place and that information on hazards
and risks is shared as widely as possible.

COSWP-RA Guidance

Uploaded by

Copyright:

Available Formats

COSWP-RA Guidance

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

COSWP-RA Guidance

Uploaded by

Copyright:

Available Formats

Code of Safe Working Practices for Merchant Seamen (COSWP) -2015

Section 1.2.5 – Risk Awareness and Risk Assessments

Risk has two elements:

Effective risk assessments:

Risk assessment level 1

Risk assessment level 2: task based

Risk assessment level 3: toolbox talk

Risk assessment stage 4: personal assessment of risk

You might also like