TSK II Series: In-Line Centrifugal Duct Fan

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

TSK II Series

IN-LINE CENTRIFUGAL DUCT FAN


In-Line Centrifugal Duct Fan – TSK II Series

• TSK II series are designed for direct in-line


connection with industrial circular ducting of Dimensions
standard diameter.
• Suitable for applications in residential,
commercial and industrial exhaust and
supply ventilation such as bathrooms,
kitchens, offices, factories, shops, bars,
gymnasiums, restaurants etc.
• Complete range of inlet and outlet diameters

ØD

ØC
Airflow
to allow installations in most standard sizes
of commercial ducts.
• The motor and impeller assembly are
suitable for operation at any angle and
deliver exceptional airflow performances B B
against the high static pressures typically
A
found in ducted ventilation systems.
• All TSK II series fan casing are
manufactured from corrosion resistant
pressed galvanised sheet steel.
• Non-stalling backward curved impeller Wt
Model A B ØC ØD
(kg)
which is factory matched to the
corresponding external rotor motor and TSK II 100L 194 23 243 98 3
dynamically balanced to ISO 1940 standards TSK II 125L 195 27 243 123 3
for vibration free operation. TSK II 160L 222 28 333 157 5
• All models are supplied as standard with a TSK II 200L 223 25 333 198 5
remotely mounted wiring junction box to
TSK II 250L 206 27 333 248 6
provide the installer with a completely
flexible choice for positioning and TSK II 315L 230 25 401 312 8
installation.
• Motors of this TSK II series are fully speed
controllable using electronic or auto-
transformer voltage control regulators.
• Enclosed, single phase, 230V, 50/60 Hz
Kruger Ventilation Industries Asia Co.,Ltd certies that
external rotor type, motors included sealed the TSK II series shown herein is licensed to bear the
for life ball bearing assemblies and Class B, AMCA Seal. The ratings shown are based on tests and
procedures performed in accordance with AMCA
IP44 protection with an internal automatic publication 211 and AMCA publication 311 and comply
reset safety thermal overload protection with the requirements of the AMCA Certied Ratings
Program.
device as standard.
• Operating temperature - 40° C to +40 ° C

Technical Data
Max Input
Max Q Motor N° Max Insulation dB (A)
Model Power Phase Hz RPM
m3/h Protection Pole Amp Class at 3m
W
TSK II 100L 265/267 73/91 IP44 1 2 50/60 0.33/0.35 B 52/53 2500/2650

TSK II 125L 395/400 75/95 IP44 1 2 50/60 0.35/0.38 B 51/51 2450/2550

TSK II 160L 726/780 121/178 IP44 1 2 50/60 0.55/0.60 B 59/60 2650/2750

TSK II 200L 950/1045 141/201 IP44 1 2 50/60 0.72/0.80 B 57/58 2500/2700

TSK II 250L 1020/1125 140/212 IP44 1 2 50/60 0.80/0.82 B 59/61 2600/2800

TSK II 315L 1609/1688 300/352 IP44 1 2 50/60 1.45/1.50 B 60/63 2600/2750

- Speed (RPM) shown is nominal. Performance is based on actual speed of test.


- Performance ratings do not include the effects of appurtenances (accessories).
- dB(A) at 3m with ducted inlet and outlet at free field conditions.
- dB(A) sound pressure levels are not licensed by AMCA International.
Performance Data - 50Hz

800

700
Lw(A) [dB(A)]

600
84

500
Ps (Pa)

80
400 79 81

79 78
300 76

80 80
200 75 75 77
76
51 80
100 73
73 72
73 80 78 80
72 83
0
0 200 400 600 800 1000 1200 1400 1600 1800
Q (m³/h)

Performance Data - 60Hz

1100

1000
Lw(A) [dB(A)]
900

800

700

600 80
Ps (Pa)

82
500
81

400
81 79 79
77
300
81 82
200 74 75 77 79

73 80
100
72
74 72 81 80 82 84
0
0 200 400 600 800 1000 1200 1400 1600 1800
Q (m ³/h)

- Speed (RPM) shown is nominal. Performance is based on actual speed of test.


- Performance ratings do not include the effects of appurtenances (accessories).
- The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values shown are for inlet LwiA sound power levels for
installation type D: ducted inlet, ducted outlet. Ratings include the effect of duct end correction.
Accessories

Ducting Fixing Clamps


- worm drive flexible duct connection clips of various
diameters.

Type Diameter (mm)


125 80 – 125
215 125 – 215
250 125 – 250
315 200 – 315

Reducers
- Plastic sections for the connection of two ducts of
different duct diameters.

Type Diameter 1 (mm) Diameter 2 (mm)


100/80 100 80
125/100 125 100
150/125 150 125

Duct Joining Pieces


- Steel sheet pieces allowing the connection of two ducts
of the same duct diameter.
Type Diameter (mm)
100 100
125 125
160 160
200 200
250 250
315 315

The company is always improving and developing its products, therefore the company reserves the right of making changes to the illustrated products.
Certified dimension can be provided upon request.

LEA026.E3 January 2018 KRUGER VENTILATION INDUSTRIES ASIA CO LTD A member of


Edition 2 - 30/159 Moo 1, Sinsakorn Industrial Estate, Chetsadawithi road,
Printed in January 2018 Khok Kham, Mueng, Samutsakorn 74000, Thailand
- Tel +662 1054298 - Fax+662 0248256-9
- www.krugerfan.com

You might also like