Post-Test For Course On Bwa & Lte'

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 2

Post-Test For Course on

‘ BWA & LTE’


_______________________________________________________________________

Name:………………………………………………. Max. Marks - 20


(20 x 1)
_________________________________________________________________________________________________________________

1. What is the minimum amount of RF spectrum needed for an FDD LTE radio channel?
a) 1.4 MHz b) 2.8 MHz c) 5 MHz d) 20 MHz
2. Which organization is responsible for developing LTE standards?
a) UMTS b) 3GPP c) 3GPP2 d) ISO
3. Which channel indicates the number of symbols used by the PDCCH?
a) PHICH b) PDCCH c) PBCH d) PCFICH
4. How often can resources be allocated to the UE?
a) Every symbol b) Every slot c) Every subframe d) Every frame
5. What is the largest channel bandwidth a UE is required to support in LTE?
a) 10 MHz b) 20 MHz c) 1.4 MHz d) 5 MHz
6. In LTE, what is the benefit of PAPR reduction in the uplink?
a) Improved uplink coverage
b) Lower UE power consumption
c) Reduced equalizer complexity
d) Improved uplink coverage, lower UE power consumption and reduced equalizer
7. With the normal cyclic prefix, how many symbols are contained in 1 frame?
a) 7 b) 140 c) 12 d) 40

8. OFDMA stands for ________


a) omnidirectional frequency division multiple access
b) orthogonal frequency duplex multiple access
c) orthogonal frequency divider multiple access
d) orthogonal frequency division multiple access
9. Why is a cyclic prefix required in an OFDMA?
a) To ensure symbol time is an integer number
b) To help overcome multipath and ISI
c) To maintain orthogonality
d) To make OFDMA scalable
10. MIMO stands for _______
a) Many input many output
b) Multiple input multiple output
c) Major input minor output
d) Minor input minor output
11. In MIMO, which factor has the greatest influence on data rates?
a) The size of antenna
b) The height of the antenna
c) The number of transmit antennas
d) The area of receive antennas
12. MIMO is a smart antenna technology.
a) True b) False
13. MIMO technology makes advantage of a natural radio wave phenomenon called _______
a) Reflection b) Multipath c) Refraction d) Diffraction
14. Which of the following technology does not use MIMO?
a) 4G b) Wifi c) WiMax d) AMPS
15. MIMO means both transmitter and receiver have multiple antennas.
a) True b) False

16.LTE was initially developed to meet which peak data rates in the downlink and uplink (respectively)?

a) 10Mbps, 5Mbps b) 100Mbps, 50Mbps c) 10MHz, 5MHz d) 14.2Mbps, 2Mbps


17. What downlink data rates will the ITU’s IMT-Advanced Standard require?

a) 10Mbps b) 100Mbps c) 1Gbps d) 50Mbps

18. Where will MIMO antennas be located?

a) Inside mobile terminals only


b) Inside mobile devices and on base stations
c) On base stations only
d) Inside USB modems only

19. WiMAX stands for


a) wireless maximum communication
b) worldwide interoperability for microwave access
c) worldwide international standard for microwave access
d) none of the mentioned

20. 2. WiMAX provides


a) simplex communication b) half duplex communication c) full duplex communication
d) none of the mentioned

You might also like