IET DR. R.M.L.

AVADH UNIVERSITY, AYODHYA

EVALUATION SCHEME & SYLLABUS

FOR

B. TECH. SECOND YEAR

CIVIL ENGINEERING

AS PER
AICTE MODEL CURRICULUM
[Effective from the Session: 2020-21]
 INSTITUTE OF ENGINEERING & TECHNOLOGY
Dr. Rammanohar Lohia Avadh University, Ayodhya
Credit Distribution and Evaluation Scheme
B.Tech. Civil Engineering
[Effective from the session 2020-2021]
YEAR 2nd, SEMESTER-III
Evaluation End
Subjects Periods Scheme Semester
Subjects Total Credit
S.No

Code L T P CT TA Total PS Mid End

Sem Sem
1 CEB 301 Engineering Mechanics 3 1 0 30 20 50 50 50 150 4
2 CEB 302 Technical Communication 3 0 0 30 20 50 50 50 150 3
3 CEC 301 Building Material & 3 0 0 30 20 50 50 50 150 3
Construction
4 CEC 302 Modern Surveying 3 1 0 30 20 50 50 50 150 4
5 CEC 303 Fluid Mechanics 3 1 0 30 20 50 50 50 150 4

6 CEC 3L1 Building Material Lab 0 0 2 25 25 50 1

7 CEC 3L2 Modern Survey Lab 0 0 2 25 25 50 1
Fluid Mechanics lab
8 CEC 3L3 0 0 2 25 25 50 1

Mini Project or Internship

9 0 0 2 50 50 1
Assessment*
MAB301 Environmental 0
10 /MAB 401 Science / Cyber Security 2 0 2 15 10 25 25 25

MOOCs /NPTEL (Essential

11
for Hons. Degree)
Total 950 22
*The Mini Project or Internship (3-4 weeks) conducted during summer break after II semester and will be assessed
during III semester.

CT: Class Test TA: Teacher Assessment L/T/P: Lecture/ Tutorial/ Practical
TH: Total Hour of Lecture for subject
First two letters department/third letter course category/fourth digit for semester/fifth and sixth course number
For Labs of B.Tech
First two letters department/third letter course category/fourth digit for semester/fifth is L for lab/and sixth Lab
number for Practical B.Tech: Example; CSB1L1,EEB1L1,CEC5L2……..
 INSTITUTE OF ENGINEERING & TECHNOLOGY
Dr. Rammanohar Lohia Avadh University, Ayodhya
Credit distribution and Evaluation Scheme B.Tech.
Civil Engineering
[Effective from the session 2020-2021]

YEAR 2nd, SEMESTER-IV

Subjects Evaluation End
Sl. Subjects Periods Semester Total Credit
Scheme
No.
Code L T P CT TA Total PS TE PE
1 APS401 Mathematics-IV, 3 1 0 30 20 50 50 50 150 4
2 APS402 Environment & Biology, 3 0 0 30 20 50 50 50 150 3
3 CEC401 Introduction to Solid Mechanics 3 1 0 30 20 50 50 50 150 4
4 CEC402 Hydraulic Engineering and Machines 3 1 0 30 20 50 50 50 150 4
5 CEC403 Concrete Technology 3 0 0 30 20 50 50 50 150 3
6 CEC4L4 Strength of Materials Lab 0 0 2 25 25 50 1
7 CEC4L5 Hydraulic Engineering and Machines Lab 0 0 2 25 25 50 1
8 CEC4L6 Concrete Technology LAB 0 0 2 25 25 50 1
9 MAB301 Environmental
/MAB 401 Science / Cyber Security 2 0 0 15 10 25 25 25

10 MOOCs /NPTEL (Essential for Hons.

Degree)
Total 900 21
 CEB 301: ENGINEERING MECHANICS (L-T-P 3-1-0) Credit – 4

Course Outcomes:
At the end of this course the student will be able to-
1. Use scalar and vector analytical techniques for analysing forces in statically determinate structures
2. Apply fundamental concepts of kinematics and kinetics of particles to the analysis of simple, practical problems.
3. Apply basic knowledge of mathematics and physics to solve real-world problems.
4. Understand basic dynamics concepts – force, momentum, work and energy;
5. Understand and be able to apply Newton’s laws of motion;

Module -I
Introduction to Engineering Mechanics: Force Systems, Basic concepts, Rigid Body equilibrium; System of Forces, Coplanar
Concurrent Forces, Components in Space – Resultant- Moment of Forces and its Applications; Couples and Resultant of Force
System, Equilibrium of System of Forces, Free body diagrams, Equations of Equilibrium of Coplanar Systems.;
[8 Hours]
Module-II
Centroid and Centre of Gravity, Centroid of simple figures from first principle, centroid of composite sections; Centre of
Gravity and its implications; Area moment of inertia- Definition, Moment of inertia of plane sections from first principles,
Theorems of moment of inertia, Moment of inertia of standard sections and composite sections; Mass moment inertia of
circular plate, Cylinder, Cone, Sphere, Hook. [8 Hours]
Module - III
Basic Structural Analysis, Equilibrium in three dimensions; Analysis of simple trusses by method of sections & method of
joints, Zero force members, Simple beams and support reactions. [8 Hours]
Module-IV

Review of particle dynamics- Rectilinear motion; Plane curvilinear motion (rectangular, path, and polar coordinates). Work-
kinetic energy, power, potential energy. Impulse-momentum (linear, angular); Impact (Direct and oblique).
[8 Hours]
Module - V
Introduction to Kinetics of Rigid Bodies, Basic terms, general principles in dynamics; Types of motion, Instantaneous centre
of rotation in plane motion and simple problems; D’Alembert’s principle and its applications in plane motion and connected
bodies; Work energy principle and its application in plane motion of connected bodies; Kinetics of rigid body rotation Virtual
Work and Energy Method- Virtual displacements, principle of virtual work for particle and ideal system of rigid bodies,
Applications of energy method for equilibrium, Stability of equilibrium. [8 Hours]
Books and References
1. Irving H. Shames (2006), Engineering Mechanics, 4th Edition, Prentice Hall
2. F. P. Beer and E. R. Johnston (2011), Vector Mechanics for Engineers, Vol I - Statics, Vol II, – Dynamics, 9th Ed, Tata
McGraw Hill
3. R. C. Hibbler (2006), Engineering Mechanics: Principles of Statics and Dynamics, Pearson Press.
4. Andy Ruina and Rudra Pratap (2011), Introduction to Statics and Dynamics, Oxford University Press

5. Shanes and Rao (2006), Engineering Mechanics, Pearson Education,

6. Hibler and Gupta (2010),Engineering Mechanics (Statics, Dynamics) by Pearson Education
7. Reddy Vijaykumar K. and K. Suresh Kumar(2010), Singer’s Engineering Mechanics
8. Bansal R.K.(2010), A Text Book of Engineering Mechanics, Laxmi Publications
9. Khurmi R.S. (2010), Engineering Mechanics, S. Chand & Co.
10. Tayal A.K. (2010), Engineering Mechanics, Umesh Publications

11. Strength of Materials by Timoshenko and Yσungs, East West Press.

12. Textbook of Applied Mechanics-Dynamics and Statics by Prasad I.B, Khanna Publications.
 Building Materials & Construction

L T P TH
4 0 0 42 Hr

Course Objectives:
• To understand the physical and mechanical properties of construction materials and their respective testing
procedure.
• To know the building materials available in market for construction purpose and Modern materials.
• To learn the principles and methods to be followed in construction of various civil engineering structures.
• To gain knowledge about doors, windows, plastering, painting, damp proofing, scaffolding, shoring,
underpinning and to take suitable engineering measures.

Module-I

Study of common building Materials: building materials and their performance, economics of the building
materials. Bricks: Manufacturing process of clay bricks, classification of clay bricks. Properties of clay bricks,
testing methods for clay bricks. Problems of efflorescence & lime bursting in bricks & tiles. Cement: Raw
materials used, Process of Manufacturing, Chemical composition, compounds formed and their effect on
strength, Types of cement, testing of cement properties, Uses of cement. Cement Concrete: Constituent
materials and their properties, Grades of concrete, Factors affecting strength, Properties of concrete at fresh
and hardened stage, Testing of concrete, Methods of Curing of concrete. Aggregate: minerology, properties
test and standard [10 Hours]

Module-II

Supplementary Cementing Materials: Pozzolona: Chemical composition and requirements for uses, Natural
and Artificial fly ash, Surkhi,Metakaolin, Rice husk and ash Pozzolona, properties and specifications for use
in construction.Lime: Manufacture of lime, classifications of limes, properties of lime. Gypsum: properties of
gypsum plaster, building products made of gypsum and their uses.Timber: Classification and identification of
timber, Fundamental Engineering Properties of timber, Defects in timber, Factor affecting strength of timber,
Methods of seasoning and preservation of timber. Wood based products. [08 Hours]

Module-III

Modern Materials: Glass, Ceramics, and Sealants for joints; Sheets for pitched roof coverings; Fiber glass
reinforced plastic; Clay products – Refractories; Composite materials –Types, application of laminar
composites; Fiber textiles- Mats and pads for earth reinforcement; Polymers and resins for building repair.
Glass: Ingredients, properties types and use in construction. Insulating Materials: Thermal and sound insulating
material, desirable properties and types. [08 Hours]

Module-IV
Buildings: Components of building, area considerations, Construction Principle and Methods for layout, damp
proofing, antitermite treatment in buildings, Vertical circulation means: stair cases and their types, design and
construction. Different types of floors, and flooring materials (Ground floor and upper floors). Bricks and stone
masonry construction.
Doors and Windows: Construction details, types of doors and windows and their relative advantages &
disadvantages. Types of roof and roof treatments, Lintel sand Chhajja, Principles of building Planning. [08
Hours]
Module-V
Natural Ventilation, Water Supply and Sanitary fittings (Plumbing), Electric Fittings. Heating Ventilation &
Air conditioning (HVAC), Mechanical Lifts and Escalators, Fire Fighting and Fire Protection of Buildings.
 Acoustics. Plastering and its types, pointing, Distempering, Color washing, Painting etc. Principles & Methods
of building maintenance.[08 Hours]

Text and References Books:

1. Building Materials and construction – Arora &Bindra, Dhanpat Roy Publications.

2. B. C. Punmia, Ashok Kumar Jain, Arun Kumar Jain (2005), Building Construction, Laxmi Publications (P)
ltd., New Delhi, India.
3. Building materials , construction and planning by S .MAHABOOB BASHA
4. Building materials by Duggal, New age Internations.
5. Building construction by PC verghese PHI.
6. Construction technology –vol -1 &2 by R. chuddy, Longman UK.
7. Basics of civil Engg by Subhash chander; Jain brothers.

NPTEL Lectures Links:

• https://nptel.ac.in/courses/105102088/
• http://www.nptelvideos.in/2012/11/building-materials-and-construction.html

Course outcome: After completion of this course, the student will be able to:

• Identify the relevant physical and mechanical properties of construction materials.

• Choose the modern construction material appropriate to the climate and functional aspects of  the
buildings.
• Select the construction technique to be followed in brick, stone, masonry, concreting, flooring, roofing,
plastering and painting etc.
 Modern Surveying

L T P T.H
3 1 0 42 hr

Course Objectives-
• To understand the basic principles of surveying and different methods of surveying  To learn about
Tacheometry, geodetic surveying and GPS surveying.
• To know the types of errors encountered in different types of surveying .
• Analyze the obtained spatial data to compute areas and volumes and draw contours to represent 3D data on
plane figures

Module- I
Introduction to Surveying: Definition, Classification, Principles, Survey stations and Survey lines;
Introduction to measurement of distance, Ranging and it’s methods, Compass survey: Basic definitions;
meridians, bearings, magnetic and True bearings. Prismatic and surveyor’s compasses, temporary
adjustments, declination. Quadrantal bearings, whole circle bearings, local attraction and related problems.
[10 Hours]

Module - II
Levelling;Methods of levelling and computation, Reciprocal leveling, distance of visible horizon, Profile
leveling and cross sectioning, Errors in levelling Contouring: Characteristics, methods, uses, computation of
areas and volumes. Curves: Elements of simple circular curves, Theory and methods of setting out simple
circular curves, Introduction to vertical curves Transition curves. [08 Hours]

Module-III
Photogrammetric Survey, basic principles, elevation of a point, determination of focal length of lens, aerial
camera, scale of a vertical photograph, relief displacement of a vertical photograph, height of object from
relief displacement, scale of a tilted photograph, tilt distortion, relief displacement of a tilted photograph,
combined effects of tilt and relief, flight planning for aerial photography, selection of altitude, interval
between exposures, crab and drift, stereoscope parallax, parallax in aerial stereoscopic views, parallax
equations. Photogrammetry – analog, analytical and digital photogrammetry. [08 Hours]

Module - IV
Modern Field Survey Systems: Principle and types of Electronic Distance Measurement systems and
instruments, Total Station- its advantages and applications; Global Positioning Systems- Segments, working
principle, errors and biases. Geographic Information System: Concepts and data types, data models, data
acquisition. GIS applications in civil engineering. Signals, Satellite station, Baseline and its importance,
corrections, Trigonometric levelling: Accessible and inaccessible objects [08 Hours]

Module- V
Global Positioning system Geographical Information System: Definition of GIS, Key Components of GIS,
Functions of GIS, Spatial data, spatial information system Geospatial analysis, Integration of
Remote sensing and GIS and Applications in Civil Engineering. [8 Hours]

Text and References Books:

1. B.C. Punamia, “Surveying Vol.1”, Laxmi Publications pvt. Ltd.,
2. SK Duggal: Surveying Vol. I, II. Tata McGraw Hill Publishing Co.Ltd. New Delhi.
3. Schofield, “Engineering Surveying” 6/e, CRC Press Taylor & Francis Group.
4. Kanetkar T P and S V Kulkarni, Surveying and Leveling Part I, Pune VidyarthiGrih
5. Prakashan. Bannister, “Surveying” 7/e, Pearson Education, Noida.
6. AM Chandra: Plane Surveying, Higher Surveying, Narosa Pub.
7. AK Dey Plain Survey, S Chand
8. R Subramanian : Surveying & Leveling , Oxford University Press
 9. C Venkatramaih : Text Book of Surveying , University Press 10.Charles D. Ghilani, Elementary Surveying
Pearson Education
10 R. Agor, “Surveying and Levelling” Khanna Publishers.

NPTEL Lecture Link:

• https://nptel.ac.in/courses/105107121/
• https://nptel.ac.in/courses/105107121/2
• https://nptel.ac.in/courses/105107157/

Course Outcome -After completion of this course, the student will be able to:
• Describe the function of surveying and work with survey instruments, take observations, and
• prepare plan, profile, and cross-section and perform calculations. Calculate, design and layout horizontal and
vertical curves.
• Operate a total station and GPS to measure distance, angles, and to calculate differences in elevation. Reduce
data for application in a geographic information system.
• Relate and apply principles of photogrammetry and GPS GIS for surveying
 FLUID MECHANICS (L-T-P 3-0-0) Credit – 3
Course Outcomes:
At the end of this course the student will be able to-

1. Understand the broad principles of fluid statics, kinematics and dynamics

2. Understand definitions of the basic terms used in fluid mechanics
3. Understand classifications of fluid flow
4. Apply the continuity, momentum and energy principles

5. Apply dimensional analysis

Module-I
Fluid and continuum, Physical properties of fluids, Rheology of fluids. Pressure-density height relationship, manometers,
pressure on plane and curved surfaces, centre of pressure, buoyancy, stability of immersed and floating bodies, fluid masses
subjected to linear acceleration and uniform rotation about an axis. [8 Hours]

Module-II

Types of fluid flows: Continuum & free molecular flows. Steady and unsteady, uniform and non-uniform, laminar and turbulent
flows, rotational and irrotational flows, compressible and incompressible flows, subsonic, sonic and supersonic flows, sub-
critical, critical and supercritical flows, one, two and three dimensional flows, streamlines, path lines, streak lines, stream tube,
continuity equation for 1-D, 2-D and 3-D flows, circulation, stream function and velocity potential function. [8 Hours]
Module-III
Potential Flow: source, sink, doublet and half-body. Equation of motion along a streamline and its integration, Bernoulli’s
equation and its applications- Pitot tube, orifice meter, venturimeter and bend meter, notches and weirs, momentum equation
and its application to pipe bends. resistance to flow, Minor losses in pipe in series and parallel, power transmission through a
pipe, siphon, water hammer, three reservoir problems and pipe networks. [8 Hours]
Module-IV

Equation of motion for laminar flow through pipes, Stokes’ law, mixing length concept and velocity distribution in turbulent
flow over smooth and rough surfaces, Boundary layer thickness, boundary layer over a flat plate, displacement, momentum and
energy thickness. Application of momentum equation. Laminar boundary layer, turbulent boundary layer, laminar sub-layer,
separation and its control. Vortex Flow: Free & Forced. [8 Hours]

Module-V
Drag and lift, drag on a sphere, aerofoil, Magnus effect, Similarity Laws; geometric, kinematics and dynamic similarity,
undistorted and distorted model studies, Dimensional analysis, Buckingham’s Pi theorem, important dimensionless numbers
and their significance. Introduction to Computational Fluid Dynamics (CFD). [8 Hours]

Books and References

1. Hibbler, “Fluid Mechanics in SI Units” 1/e Pearson Education, Noida.

2. Fox & Donald, “Introduction to Fluid Mechanics” John Wiley &Sons Pvt Ltd,
3. Cengel & Cimbala, ”Fluid Mechanics” TMH, New Delhi.
4. Katz, “Introductory Fluid Mechanics” Cambridge University Press
5. Pnueli & Gutfinger, “Fluid Mechanics” Cambridge University Press
6. Modi & Seth “Hydraulics & Fluid Mechanics” Standard Publications.

7. Gupta, “Fluid Mechanics & Hydraulic Machines” Pearson Education, Noida

8. Graebel, “Engineering Fluid Mechanics”, CRC Press Taylor & Francis Group.
9. Janna, “Introduction to Fluid Mechanics” 4/e, CRC Press Taylor & Francis Group
 ENVIRONMENTAL SCIENCE

Sub. Code: MAB 301 No. of Credits: No. of Lecture Hours / Week:
00=02:0:0 02
Exam Duration: 03 Hrs Total No. of Contact Hours: 28

Course Learning Objectives:

1. Create the awareness about environmental problems.
2. Develop an attitude of concern for the environment.
3. Impart basic knowledge about the environment and its allied problems.
4. Acquire skills to help the concerned individuals in identifying and solving environmental problems.
5. Motivate learner to participate in environment protection and environment improvement.
Unit Syllabus Contents No. of Blooms Relevant
No. Hours Taxonomy CO’s
Level
1. Multidisciplinary nature of Environmental Science: 5 L1,L2,L3 CO1
Definition, Scope, Importance and Need of Public
Awareness. Structure of Environment.
2. Ecosystem: Concept of ecosystem, structure and 6 L1,L2,L3 CO1, CO2
function of ecosystem, food chain food web and
ecological pyramid. Different types of ecosystems
(Forest, Grassland & Pond).
3. Natural Resource and associated problems: Use and 6 L1,L2,L3 CO1, CO3
over exploitation of forest resource, deforestation.
Mining and their effects. Use and Overutilization of
surface and ground water, Effect of modern agriculture.
4. Environmental pollution and their effects: Water 5 L1,L2,L3 CO1, CO4
pollution, Air Pollution, Noise pollution, Soil pollution,
Solid waste management.
5. Environmental Protection: Environmental Laws, 6 L1,L2,L3 CO4, CO5
Role of individual and NOG’s in environmental
protection, Sustainable development.

Course Outcome:
CO1: The students can able to make environmentally friendly decision in practical applications.
CO2: The knowledge gained will lead to pollution free environment.
CO3: The current environmental issues can be handled in better way.
CO4: The knowledge of natural resources will lead to have balanced ecosystems.
CO5: Environmental education at different levels will lead to control and protect the ecosystem.

References:
1. Bharucha Erach, The biodiversity of India, Mapin Publishing Pvt. Ltd. Ahmedabad.
2. Cunninghum, W. P., Cooper, T. H., Gorhani, E and Hepworth, M.T. 2001. Environmental encyclopedia,
Jaico Publ. House, Mumbai.
3. Miller, T. G. Jr Environmental Science system and solution, Web enhanced edition.
4. Sharma, B. K. 2009. Environmental Chemistry, Goel Publ. House.
5. Trivedi, R. K. and P. K. Goel. Introduction to air pollution, Techno-Science Publication
 Building Material and construction Lab [L-T-P 0-0-2]
1. Tension test on mild steel and HYSD bars
2. Compression test on mild steel, cast iron and wood.
3. Torsion test on mild steel circular sections.
4. Bending Test on Wood Under two point loading
5. Shear Test on Mild steel- single and double shear
6. Tests on Fine aggregates – Moisture content, Specific gravity, Bulk density, Sieve analysis and Bulking
7. Tests on Coarse aggregates – Absorption, Moisture content, specific gravity, Bulk density and Sieve analysis.
8. Hardness tests on ferrous and non-ferrous metals– Brinell’s, Rockwell and Vicker’s

Modern Surveying Lab [L-T-P 0-0-2]

1. To measure bearings of a closed traverse by prismatic compass and to adjust the traverse by graphical
method.
2. To find out reduced levels of given points using Auto/dumpy level.
3. To study parts of a Vernier and electronic theodolite and measurement of horizontal and vertical angle.
4. To measure horizontal angle between two objects by repetition/reiteration method.
5. To determine the height of a vertical structure (e.g. chimney/ water tank etc.) using trigonometrical leveling
by taking observations in single vertical plane.
6. To set out a simple circular curve by Rankine’s method.
7. Demonstration and working on Electronic Total Station. Measurement of distances, horizontal & vertical
angles, coordinates and area of a land parcel.
8. Demonstration and working with Mirror stereoscopes, Parallax bar and Aerial photographs.
9. Visual Interpretation of standard FCC (False colour composite).
10. Digitization of physical features on a map/image using GIS software.
11. Coordinates measurement using GPS.

FLUID MECHANICS LAB (L-T-P 0-0-2) Credit – 1

Note: Students will perform minimum 10 experiments from the following:

1. To verify the momentum equation using the experimental set-up on impact of jet.
2. To determine the coefficient of discharge of an orifice of a given shape. Also to determine the coefficient of
velocity and the coefficient of contraction of the orifice mouth piece.
3. To calibrate an orifice meter and study the variation of the co-efficient of discharge with the Reynolds number.
4. To calibrate a Venturimeter and study the variation of the co-efficient of discharge with the Reynolds number.
5. To calibrate a bend meter and study the variation of the co-efficient of discharge with the Reynolds number.
6. Verification of Bernoulli’s Theorem
7. To study the transition from laminar to turbulent flow and to determine the lower critical Reynolds number.
8. To study the velocity distribution in a pipe and also to compute the discharge by integrating the velocity profile.
9. To study the variation of friction factor, ‘f’ for turbulent flow in commercial pipes.
10. To study the boundary layer velocity profile over a flat plate and to determine the boundary layer thickness.
11. To determine Meta-centric height of a given ship model.
12. To determine the head loss for a sudden enlargement, sudden contraction and losses in bend.
13. Flow Visualization -Ideal Flow
14. To make studies in Wind Tunnel (Aerofoil and circular cylinder).
 Mathematics-IV
L T P T.H
3 1 0 40 Hr

Module I: Partial Differential Equations

Origin of Partial Differential Equations, Linear and Non Linear Partial Equations of first order, Lagrange’s
Equations, Charpit’s method, Cauchy’s method of Characteristics, Solution of Linear Partial Differential
Equation of Higher order with constant coefficients, Equations reducible to linear partial differential equations
with constant coefficients.

Module II: Applications of Partial Differential Equations:

Classification of linear partial differential equation of second order, Method of separation of variables, Solution
of wave and heat conduction equation up to two dimension, Laplace equation in two dimensions, Equations of
Transmission lines.

Module III: Statistical Techniques I:

Introduction: Measures of central tendency, Moments, Moment generating function (MGF) , Skewness,
Kurtosis, Curve Fitting , Method of least squares, Fitting of straight lines, Fitting of second degree parabola,
Exponential curves ,Correlation and Rank correlation, Regression Analysis: Regression lines of y on x and x
on y, regression coefficients, properties of regressions coefficients and non linear regression.

Module IV: Statistical Techniques II:

Durability of concrete: Permeability of concrete - Shrinkage-plastic shrinkage - drying shrinkage - Chemical

attack - Sulphate attack of concrete structures - chloride attack, Alkali aggregate reaction., carbonation, freezing
and thawing. Corrosion Curing and Methods of curing. Testing of hardened concrete, Creep–factors affecting
creep. [08Hours]

Module V: Statistical Techniques III:

Sampling, Testing of Hypothesis and Statistical Quality Control: Introduction , Sampling Theory (Small
and Large) , Hypothesis, Null hypothesis, Alternative hypothesis, Testing a Hypothesis, Level of
significance, Confidence limits, Test of significance of difference of means, T-test, F-test and Chi-square
test, One way Analysis of Variance (ANOVA).Statistical Quality Control (SQC) , Control Charts , Control
Charts for variables ( X and R Charts), Control Charts for Variables ( p, np and C charts).

Text Books
1. Erwin Kreyszig, Advanced Engineering Mathematics, 9thEdition, John Wiley &
Sons, 2006.
2. P. G. Hoel, S. C. Port and C. J. Stone, Introduction to Probability Theory, Universal
Book Stall, 2003(Reprint).
3. S. Ross: A First Course in Probability, 6th Ed., Pearson Education India, 2002.
4. W. Feller, An Introduction to Probability Theory and its Applications, Vol. 1, 3rd Ed.,
Wiley, 1968.
Reference Books
1. B.S. Grewal, Higher Engineering Mathematics, Khanna Publishers, 35th Edition, 2000.
2.T.Veerarajan : Engineering Mathematics (for semester III), Tata McGraw-Hill, New
Delhi.
3. R.K. Jain and S.R.K. Iyenger: Advance Engineering Mathematics; Narosa
Publishing House, New Delhi.
 4. J.N. Kapur: Mathematical Statistics; S. Chand & Sons Company Limited, New
Delhi. 5. D.N.Elhance,V. Elhance & B.M. Aggarwal: Fundamentals of Statistics; Kitab
Mahal Distributers, New Delhi.

ENVIRONMENT & BIOLOGY

Sub. Code: APS-402 No. of Credits: 03=03:0:0 No. of Lecture Hours / Week: 03
Exam Duration: 03 Hrs Total No. of Contact Hours: 30

Course Learning Objective:

1. To convey that all forms of life has the same building blocks and yet the manifestations are as diverse
as one can imagine.
2. To create consciousness among the students about impacts of development on natural resources and
human life, remedial measures for life and life support systems viz. land, water, air, etc.
3. To understand the importance of environmental protection of life.
4. It makes how to conserve natural resources for sustainable development
5. To convey that without catalysis life would not have existed on earth.

Unit Syllabus Contents No. of Blooms Relevant

No. Hours Taxonomy CO’s
Level
1. Ecology and Biology : Concept of Ecosystems, Energy 6 L1,L2,L3 CO1,CO2
flow in ecosystems, Biodiversity and its Conservation,
Classification and characteristics of living organisms.
2. Environmental Change and Disaster: Different 6 L1,L2,L3 CO1, CO3
Environmental Pollution and their management,
Current Environmental Issues: Global warming, Ozone
layer depletion, Acid rain, Rain Water Harvesting,
Waste land reclamation. Disaster and its management
(Earth quake, Flood, Landslides, Cyclone).
3. Energy Resources: Environmental impact of fossil fuel 6 L1,L2,L3 CO1,CO3
use. Solar energy, Geothermal Energy,
Hydroelectricity, wave and tidal generation, use of
biogas.
4. Environmental Protection through Assessment and 6 L1,L2,L3 CO3,CO4
Education: Sustainable Development and
Environmental Impact Assessment, Role of
Government in pollution control (Environmental
Protection Act, 1986; Wildlife Protection Act, 1972;
Water Act, 1974; Air Act, 1981).
5. Bioengineering of waste removal: Bioremediation and 6 L1,L2,L3 CO4,CO5
phytoremediation technology, Microbiology of waste
water treatment.
Course Outcome:
1. The students can able to make bio-friendly and environmental friendly decision in practical
application.
2. Students will be able to describe living systems, including their nature, organization and evolution.
3. Students will be able to explain why science is an integral activity for addressing social and
environmental problems.
4. Students will be able to describe how human activities affect the living world and the physical
environment.
5. Students will be able to apply methods of scientific inquiry in biology.
Text Books:
1. Ranjit Daniels, R. J. and Jagdish Krishnaswamy. “Environmental Studies”, Wiley India Private Ltd.,
New Delhi
2. Benny Joseph, “Environmental Studies”. Tata McGraw – Hill Publishing Company Limited.
3. Biology: A Global Approach (2015): Campbell, A., Reece, J. B., Urry Lisa; Cain, M. L., Wasserman,
S. A., Minorsky, P. V., Jackson, R. B. Pearson Education Ltd.
4. Molecular Genetics (second edition), Stent, G. S. and Calender, R. W. H. Freeman and company,
Distributed by Satish Kumar Jain for CBS Publisher.
References
1. Raman Sivakumar, (2015). “Principles of Environmental Science and Engineering”. Second Edition,
Thomson Learning, Singapore.
2. Meenakshi P. (2006). “Elements of Environmental Science and Engineering”. Prentice Hall of India
Private Limited. New Delhi.
3. Prakash S. M. (2007). “Environmental Studies”, Elite Publishers, Manglore.
4. Tyler Miller Jr. G. (2004). “Environmental Science – Working with the Earth”, Tenth Edition,
Thomson Brroks/Cole
5. Molecular Genetics (Second Edition), Stent, G. S. and Calender, R. W. H. Freeman and company,
Distributed by Satish Kumar Jain for CBS Publisher.
6. Biology: A Global Approach (2015): Campbell, A., Reece, J. B., Urry Lisa; Cain, M. L., Wasserman,
S. A., Minorsky, P. V., Jackson, R. B. Pearson Education Ltd.
HYDRAULIC ENGINEERING & MACHINES (L-T-P 3-1-0) Credit – 4
Course Outcomes:
At the end of this course the student will be able to-
1. Apply their knowledge of fluid mechanics in addressing problems in open channels.
2. Solve problems in uniform, gradually and rapidly varied flows in steady state conditions.
3. Have knowledge in hydraulic machineries like pumps and turbines.
Module-I
Introduction : Basic concepts of free surface flows, velocity and pressure distribution, Mass, energy
and momentum principle for prismatic and non-prismatic channels critical, subcritical and super-
critical type of flows. Critical depth, concepts of specific energy and specific force. Chezy’s and
Manning’s equations for uniform flow in open channel, Velocity distribution, most efficient channel
section, compound sections. [8 Hours]
Module-II
Energy-Depth relationship: Application of specific energy principle for interpretation of open channel
phenomena, flow through vertical and horizontal contractions. Equation of gradually varied flow and
its limitations, flow classification and surface profiles, integration of varied flow equation by analytical,
graphical and numerical methods. Measurments of discharge & velocity – Venturi flume, Standing
wave flume, Parshall flume, Broad crested weir, Current meter and Floats. [8 Hours]
Module-III
Rapidly varied flow: Hydraulic jump; Evaluation of the jump elements in rectangular channels on
horizontal and sloping beds, energy dissipater, open channel surge, celerity of the gravity wave, deep
and shallow water waves. [8 Hours]
Module-IV
Impulse momentum equation- Impact of Jets-plane and curved- stationary and moving plates. Pumps:
Positive displacement pumps - reciprocating pumps , centrifugal pumps, operation, velocity triangles,
performance curves, Cavitation, Multi staging, Selection of pumps. [8 Hours]
Module-V
Rotodynamic Machines, Pelton Turbine, equations for jet and rotor size, efficiency, spear valve,
reaction turbines, Francis and Kaplan type, Head on reaction turbine, unit quantities, similarity laws
and specific speed, cavitation, characteristic curves. [8 Hours]
Books and References
1. Chow,V.T. “Open Channel hydraulics” McGraw Hill Publication
2. Subramanya, K., Flow through Open Channels, TMH, New Delhi
3. Ranga Raju, K.G., Flow through open channels, T.M.H. New Delhi
4. Rajesh Srivastava, Flow through Open Channels , Oxford University Press
5. Streeter, V.L.& White E.B., ”Fluid Mechanics” McGraw Hill Publication
6. Modi & Seth “Hydraulics & Fluid Mechanics” Standard Publications.
7. RK Bansal “Fluid Mechanics and Hydraulic Machines” Laxmi Publication
8. AK Jain “Fluid Mechanics” Khanna Publication.
9. Houghtalen, “Fundamentals of Hydraulics Engineering Systems” 4/e Pearson Education, Noida
 Concrete Technology

L T P T.H
3 0 0 40 Hr
Course Objectives:
To get the knowledge on quality of concrete, Proportion ingredients of Concrete to arrive at most desirable
mechanical properties of Concrete durability aspects, causes of deterioration, and repairing of concrete
structures.

Module I
Cement: Manufacture, basic properties of cement compounds, types and cement chemistry ,Hydration of cement
Aggregates: mineralogy, properties, test and standards. Workability :Factors affecting workability and its
Measurement. [08 Hours]

Module II
Study of SCM’s : like fly ash, silica fume , ground granulated blast furnace slag, metakaoline and Pozzolana .
Admixtures - process of various stages of concrete, study of accelerators, retarders, water reducers, air
entrainers , water proofers, super plasticizers. Factors influencing strength, W/C ratio, gel/space ratio, Maturity
concept. [08 Hours]

Module III
Mix design: Principle of mix proportioning, properties related to mix design, Mix design method (IS method and
ACI method). Mix design of concrete: packing density, Rheology, mix design examples. [08 Hours]

Module IV
Durability of concrete: Permeability of concrete - Shrinkage-plastic shrinkage - drying shrinkage - Chemical
attack - Sulphate attack of concrete structures - chloride attack, Alkali aggregate reaction., carbonation, freezing
and thawing. Corrosion Curing and Methods of curing. Testing of hardened concrete, Creep–factors affecting
creep. [08Hours]

Module IV
Special concrete properties and their application : Study and uses of high strength concrete, High performance
concrete - high strength concrete, high density concrete - light weight concrete - Fibre reinforced concrete -
self-compacting concrete - Polymer concrete. [08Hours]

Text Books:

1. Neville A.M. “Properties of Concrete”-4th Ed., Long man.

2. M.S. Shetty, Concrete Technology - Theory and Practice Published by S. Chand and Company, New
Delhi.
3. Kumar Mehta. P and Paulo J.M. Monteiro “Concrete-Microstructure, Property and Materials”, 4th
Edition, McGraw Hill Education, 201 4
4. A.R. Santha Kumar, “Concrete Technology”, Oxford University Press, New Delhi (New Edition)

Reference Books:

1. M L Gambir, “Concrete Technology”, McGraw Hill Educ ation, 2014.

2. N. V. Nayak, A. K. Jain Handbook on Advanced Concrete Technology, 3. Job Thomas,
“Concrete Technology”, CENGAGE Learning ,2015
4. IS 4926 (2003): Code of Practice Ready-Mixed Concrete .
5. IS 10262 (2002) : code of Practice Concrete Mix Design.
6. Criteria for RMC Production Control, Basic Level Certification for Production Control of Ready Mixed
Concrete-BMTPC
7. Specification and Guidelines for Self-Compacting Concrete, EFNARC, Association House

NPTEL Lecture Links :

• https://nptel.ac.in/courses/105102012/
• https://nptel.ac.in/courses/105106176/

Course Outcome: After success full completion of course students will be able to: -

• Relate material characteristics and their influence on microstructure of concrete.

• Distinguish concrete behaviour based on its fresh and hardened properties.
• Illustrate proportioning of different types of concrete mixes for required fresh and hardened properties using
professional codes.
Strength of Materials Lab [L-T-P 0-0-2]

1. Direct Tension Test of Mild steel bar

2. Torsion and shear Modulus Test
3. Hardness Test- (A) Brinell’s Hardness Test (B) Rockwell Hardness Test
4. Impact Test on metal specimen
5. Deflection of beams (a) Cantilever (b) Simply Supported
6. Static Bending Test Of Steel And Timber Beam
7. Basics of Shear Force And Bending Moment
8. Test of Slender Column
9. Basics of Shear Centre
10. Punching shear Test on Metal
11. Test on spring

Hydraulics Engineering & MachinesLab (L-T-P 0-0-2) Credit – 1

Note: Students will perform minimum 10 experiments from the following:

1. To determine the Manning’s coefficient of roughness ‘n’ for the bed of a given flume. 2. To study the velocity distribution
in an open channel and to determine the energy and momentum correction factors. 3. To study the flow characteristics
over a hump placed in an open channel. 4. To study the flow through a horizontal contraction in a rectangular channel. 5. To
calibrate a broad-crested weir. 6. To study the characteristics of free hydraulic jump. 7. To study centrifugal pump and their
characteristics 8. To study characteristics of Pelton Turbine. 9. To study characteristics Francis Turbine. 10. To study
characteristics of Kaplan Turbine. 11. To study the free over-fall phenomenon in an open channel and to determine the end
depth 12. To determine coefficient of discharge for given rectangular notch.

Concrete Technology Lab [L-T-P 0-0-2]

1. Testing of cement: Consistency, fineness, setting time, Specific Gravity, Soundness and strength.
2. Testing of fine aggregate: Specific Gravity, sieve analysis and zoning, bulking of fine aggregate, bulk
density, silt content.
3. Testing of coarse aggregate: Specific Gravity, sieve analysis, bulk density, flakiness index, elongation
index, water absorption & moisture content, soundness of aggregate.
4. Concrete Mix design by ACI 211.1-91 method, IS code method as per 10262- 2007 & 456-2000, DOE
method
5. Tests on Concrete- Workability tests – Slump cone test, compaction factor test, Vee-bee consistometer
test, flow table test, strength tests- compressive strength, flexural strength, split tensile strength.
6. Effects of Admixture - Accelerator, Retarder, Super Plasticizer.
7. Nondestructive Testing - Rebound Hammer test, Ultrasonic Pulse Velocity test.
8.