ELECTRICAL MACHINES-II

Subject Code : EE403ES

Regulations : R16 - JNTUH
Class : II Year B.Tech EEE II Semester

Department of Electrical and Electronics and Engineering

BHARAT INSTITUTE OF ENGINEERING AND TECHNOLOGY
Ibrahimpatnam - 501 510, Hyderabad
 ELECTRICAL MACHINES-II (EE403ES)

B.TECH II Year II Sem

COURSE PLANNER

I. OBJECTIVE AND RELEVANCE:

The main objective of this subject is to understand and to know the following concepts:

To deal with the detailed analysis of poly phase induction motors & Synchronous
Generators and motors
To understand operation, construction and types of single phase motors and their applications in
house hold appliances and control systems.
To introduce the concept of parallel operation of synchronous generators.
To introduce the concept of regulation and its calculations.
II. PREREQUISITES:
The knowledge of following subjects is essential to understand this subject:

▪ Electrical Machines-I
▪ Basic concepts about electrical energy conversion principles.
▪ Knowledge in Mathematics.
III. COURSE OUTCOME:
Bloom’s Taxonomy
S.No Description
Level
Understand the construction and working of 3-φ Knowledge, Understand
CO1 Induction machines. (Level 1, Level 2)
Understand the characteristics and different speed Knowledge, Applying
CO2 control methods of 3-φ Induction motor. (Level1, Level 3)
Understand the construction and working of Alternator. Knowledge, Understand
CO3
(Level 1, Level 2)
Analyze different methods to find the regulation of
Analyzing, Evaluating
CO4 alternators. (Level 4, Level 5)
Understand the parallel operation of alternators and
Understand, Analyzing
CO5 operation of synchronous motor. (Level 2, Level 4)
Understand the operation of different 1-φ Induction Knowledge, Understand
CO6 motors. (Level 1, Level 2)
IV. HOW PROGRAM OUTCOMES ARE ASSESSED:
Proficiency
Program Outcomes (PO) Level
assessed by
Engineering Knowledge: Apply the knowledge of Lectures,
mathematics, science, engineering fundamentals, and Assignments
PO1 an engineering specialization to the solution of 3 university
complex engineering problems.
exams.

Problem Analysis:Identify, formulate, review Slip tests,

research literature, and analyze complex engineering Surprise tests
PO2 problems reaching substantiated conclusions using 2 and Mock
first principles of mathematics, natural sciences, and
tests
engineering sciences.
Design/Development Analysis:Design solutions for
complex engineering problems and design system Hands on
components or processes that meet the specified Practice
PO3 2
needs with appropriate consideration for the public sessions
health and safety, and the cultural, societal, and
environmental considerations.
Conduct Investigations of Complex Problems:Use Lab Sessions
research-based knowledge and research methods
and model
PO4 including design of experiments, analysis and 2
interpretation of data, and synthesis of the developments
information to provide valid conclusions.
Modern Toll Usage:Create, select, and apply Practices new
appropriate techniques, resources, and modern Soft
PO5 engineering and IT tools including prediction and 2 computing
modeling to complex engineering activities with an
techniques
understanding of the limitations.
The Engineer and Society: Apply reasoning
Seminars &
informed by the contextual knowledge to assess
PO6 societal, health, safety, legal and cultural issues and 2
Project work
the consequent responsibilities relevant to the
professional engineering practice.
Environment and Sustainability: Understand the
impact of the professional engineering solutions in
PO7 societal and environmental contexts, and - --
demonstrate the knowledge of, and need for
sustainable development.
Ethics: Apply ethical principles and commit to
PO8 professional ethics and responsibilities and norms of - --
the engineering practice.
Individual and Team Work: Function effectively as
PO9 an individual, and as a member or leader in diverse - --
teams, and in multidisciplinary settings.
Communication: Communicate effectively on
Seminars,
PO10 complex engineering activities with the engineering 2
community and with society at large, such as, being
 able to comprehend and write effective reports and Discussions
design documentation, make effective presentations,
and give and receive clear instructions.
Project Management and Finance: Demonstrate
knowledge and understanding of the engineering and Develop new
PO11 management principles and apply these to one’s own 2 projects
work, as a member and leader in a team, to manage
projects and in multidisciplinary environments.
Life-long Learning: Recognize the need for, and
have the preparation and ability to engage in
PO12 2 Research
independent and life-long learning in the broadest
context of technological change.
1: Slight (Low) 2: Moderate (Medium) 3: Substantial (High) -: None

V. HOW PROGRAM SPECIFIC OUTCOMES ARE ASSESSED:

Proficiency
Program Specific Outcomes (PSO) Level
assessed by
Talented to analyze, design, and implement electrical & Lectures,
electronics systems and deal with the rapid pace of industrial
PSO1 2
innovations and developments. Assignments.

Skillful to use application and control techniques for research Participate

and advanced studies in Electrical & Electronics Engineering events, seminars
PSO2 domain. 2
& symposiums

1: Slight (Low) 2: Moderate (Medium) 3: Substantial (High) -: None

VI. SYLLABUS:
JNTUH SYLLABUS

UNIT – I

Polyphase Induction Motors: Constructional details of cage and wound rotor machinesproduction of a
rotating magnetic field - principle of operation - rotor EMF and rotor frequency - rotor reactance, rotor
current and Power factor at standstill and during operation.

UNIT - II

Characteristics of Induction Motors: Rotor power input, rotor copper loss and mechanical power
developed and their inter relation-torque equation-deduction from torque equation - expressions for
maximum torque and starting torque - torque slip characteristic – equivalent circuit - phasor diagram -
crawling and cogging -.No-load Test and Blocked rotor test – Predetermination of performance Methods
of starting and starting current and Torque calculations.

Speed Control Methods: Change of voltage, change of frequency, voltage/frequency, injection of an

EMF into rotor circuit (qualitative treatment only)-induction generatorprinciple of operation.

UNIT – III
Construction, Principle of operation, Characteristics & Regulation of Synchronous

Generator: Constructional Features of round rotor and salient pole machines – Armature windings –
Integral slot and fractional slot windings; Distributed and concentrated windings – distribution, pitch and
winding factors – E.M.F Equation. Harmonics in generated e.m.f. – suppression of harmonics –armature
reaction – leakage reactance – synchronous reactance and impedance – experimental determination –
phasor diagram – load characteristics.

Regulation by synchronous impedance method, M.M.F. method, Z.P.F. method and A.S.A. methods –
salient pole alternators – two reaction analysis – experimental determination of Xd and Xq (Slip test)
Phasor diagrams – Regulation of salient pole alternators.

UNIT - IV

Parallel Operation of Synchronous Generator: Synchronizing alternators with infinite bus bars –
synchronizing power torque – parallel operation and load sharing - Effect of change of excitation and
mechanical power input. Analysis of short circuit current wave form – determination of sub-transient,
ransient and steady state reactances.

Synchronous Motors – Principle of Operation: Theory of operation – phasor diagram – Variation of

current and power factor with excitation – synchronous condenser – Mathematical analysis for power
developed .- hunting and its suppression – Methods of starting – synchronous induction motor.

UNIT - V

Single Phase Motors & Special Motors:: Single phase induction motor – Constructional features-Double
revolving field theory – split-phase motors – shaded pole motor..

GATE SYLLABUS:
Single phase transformer: equivalent circuit, phasor diagram, open circuit and short circuittests,
regulation and efficiency; three phase transformers: connections, parallel operation;
Auto‐transformer, Electromechanical energy conversion principles.

DC machines: separately excited, series and shunt, motoring and generating mode of operation and
their characteristics, starting and speed control of dc motors;

Three phase induction motors: principle of operation, types, performance, torque-speed

characteristics, no-load and blocked rotor tests, equivalent circuit, starting and speed control;
Operating principle of single phase induction motors;

Synchronous machines: cylindrical and salient pole machines, performance, regulation and parallel
operation of generators, starting of synchronous motor, characteristics; Types of losses and efficiency
calculations of electric machines.

ESE SYLLABUS:
 Single phase transformers, three phase transformers - connections, parallel operation, auto-
transformer, energy conversion principles, DC machines - types, windings, generator characteristics,
armature reaction and commutation, starting and speed control of motors, Induction motors -
principles, types, performance characteristics, starting and speed control, Synchronous machines -
performance, regulation, parallel operation of generators, motor starting, characteristics and
applications, servo and stepper motors.

SUGGESTED BOOKS:

TEXT BOOKS:

1. “I. J. Nagrath & D. P. Kothari”, “Electric Machines”, Tata Mc Graw Hill, 7th Edition, 2009
2. “PS Bhimbra”, “Electrical machines”, Khanna Publishers, 2014.
REFERENCE BOOKS:

1. “M. G. Say”, “Performance and Design of AC Machines”, CBS Publishers, 3rd Edition, 2002.
2. “A.E. Fitzgerald, C. Kingsley and S. Umans”, “Electric machinery”, Mc Graw Hill Companies, 7th
edition, 2013
3. “Langsdorf”, “Theory of Alternating Current Machinery”, Tata McGraw-Hill Companies,
2nd edition, 1984.
4. “M.V Deshpande”, “Electrical Machines”, Wheeler Publishing, 2011
5. “J.B.Gupta”, “Electrical Machines Vol. 2”, Sk Kataria & Sons, 2012.
VII. COURSE PLAN (WEEK-WISE):

Reference
Session

Course Learning
Week

Topic
Outcomes

UNIT – 1 Polyphase Induction Motors

1. Introduction to Syllabus Understand

2. Introduction to Induction machines Gain knowledge

3. Constructional details of cage rotor Explain

1
4. Constructional details of wound Know T1, T2
rotor machines & R2

5. Difference between cage and Distinguish

wound rotor machines
2
6. Production of a rotating magnetic Understand
field
7. Principle of operation Explain

8. Rotor EMF and rotor frequency Derive

9. Rotor reactance, rotor current and Derive

Power factor at standstill and
during operation

10. 3 Mock Test- I Apply

11. Tutorial/Bridge Class 1

UNIT-II Characteristics of Induction Motors

12. Rotor power input, rotor copper Discuss T1, T2

loss & R2

13. Build relations

Mechanical Power Developed and between power
4 their inter relation developed at
various stages

14. Torque equation Derive

15. Deductions from torque equation

16. Expressions for maximum torque & Formulate

starting torque

17. 5 Problems Solve

18. Torque slip characteristics Study

19. Equivalent circuit Develop T1, T2

20. Phasor diagrams, Crawling and Constrruct & R2
cogging

21.
6 No load test, Blocked rotor test Experiment

22. Predetermination of performance Evaluate

23. Methods of starting Classify

24. Methods of starting Understand T1, T2

7
25. Estimate & R2
Starting current and Torque
 calculations

26. Speed control methods Explain

27. Speed control methods Judge

28. Speed control methods Conclude

29. Induction Generator and Principle Demonstrate

of operation

30. 8 Problems Solve

UNIT- III Construction, Principle of operation,

Characteristics & Regulation of Synchronous

Generator

31. Constructional Features of round Discuss

rotor and salient pole machines

32. Armature windings, Integral slot Explain

and fractional slot windings
T1, T2
9
33. Tutorial/Bridge Class 2 & R2

34. Distributed and concentrated Distinguish

windings

Revison Class

35. (18/02/2019 to 20/02/2019) I Mid Examinations (Week 9)

36. Distribution, pitch and winding Define

factors – E.M.F Equation, Problems Derive emf euqtion

37. Harmonics in generated e.m.f. – Analyze T1, T2

10
suppression of harmonics & R2

38. Armature reaction Explain

39. Tutorial/Bridge Class 3

40. Leakage reactance – synchronous Understand T1, T2

11
reactance and impedance & R2
41. Experimental determination Experiment

42. Phasor diagram Develop

43. Load characteristics Categorize

44. Regulation by synchronous Examine

impedance method, M.M.F.
method

45. 12 Tutorial/Bridge Class 4

T1, T2
46. Z.P.F. method and A.S.A. methods Determine
& R2
47. Problems Solve

48. Salient pole alternators, Two Analyze

reaction analysis

49. Experimental determination of Xd Experiment T1, T2

13 and Xq (Slip test) Phasor diagrams & R2

50. Regulation of salient pole Evaluate

alternators

UNIT –IV Parallel Operation of Synchronous Generator

51. Synchronizing alternators with Explain

infinite bus bars

52. Synchronizing power torque Discuss

53. Parallel operation and load sharing, Eloborate T1, T2

14
Problems Solve & R2

54. Tutorial/Bridge Class 5

55. Effect of change of excitation and Examine

mechanical power input

56. Analysis of short circuit current Discover

wave form
T1, T2
57. 15 Determination of sub-transient, Determine & R2
transient and steady state
reactances
 58. Synchronous motor and principle Understand
of operation

59. Phasor diagram – Variation of Build

current and power factor with
excitation Examine

60. Synchronous condenser, Explain

Mathematical analysis for power
developed Analyze

61. Hunting and its suppression Explain

62. Methods of starting Discuss

T1, T2
63. Synchronous induction motor Explain
& R2
64. 16 Mock Test- II

UNIT- V Single Phase Motors & Special Motors

65. Single phase induction motor, Extend

Constructional features

66. Double revolving field theory Apply T1, T2

& R2
67. Split-phase motors, shaded pole Explain
17 motor

68. Problems Solve

69. Tutorial/Bridge Class 6

70. REVISION UNIT-I RECALL AND RECAP

MAPPING COURSE OUTCOMES LEADING TO THE ACHIEVEMENT

OFPROGRAM OUTCOMES AND PROGRAM SPECIFIC OUTCOMES:
 Program
Program Outcomes Specific
Outcomes
P P
PO PO PO PO PO PO PO PO1 PO PSO PSO
O O PO11
2 3 4 5 6 7 8 0 12 1 2
1 9
2 3 2 3 - 2 - - - 2 2 2 1 2
CO1
3 - - 2 2 - - - - - 1 3 3 2
CO2
2 1 2 - 2 1 - - - 2 2 2 3 1
CO3
3 2 2 1 2 2 - - - 2 1 2 2 2
CO4
- 2 - 2 2 1 - - - 1 2 1 1 2
CO5
2 - 2 - - 2 - - - 2 - 2 2 1
CO6
2.4 2 2 2 2 1.6 1.8 1.6 2 2 1.667
AVG

VIII. QUESTION BANK (JNTUH):

Long Answer Questions

Blooms Course
S.No Question Taxonomy Outco
Level me

Explain the principle and operation of three phase induction

1 Knowledge 1
motor?

A 4-pole induction motor, supplied by a slightly unbalanced

three-phase 50 Hz source, is rotating at 1440 rpm. The
2 Solving 3
electrical frequency in Hz of the induced negative sequence
current in the rotor is?

Explain about the various losses occurring in a three phase

3 Explain 2
induction motor?

A three-phase 440 V, 6 poles, 50 Hz, squirrel cage induction

motor is running at a slip of 5%. The speed of stator magnetic
4 Solving 2
field to rotor magnetic field and speed of rotor with respect of
stator magnetic field are?

5 Derive the torque equation of three phase induction motor? Derive 2

A three-phase squirrel cage induction motor has a starting

6 torque of 150% and a maximum torque of 300% with respect to Applying 3
rated torque at rated voltage and rated frequency. Neglect the
 stator resistance and rotational losses. The value of slip for
maximum torque is?

7 Draw the torque slip characteristics of three phase induction Explain 2

motor?
A three phase squirrel cage induction motor has a starting
current of seven times the full load current and full load slip of
8 Determine 3
5% if an auto transformer is used for reduced voltage starting to
provide 1.5 per unit starting torque, the auto transformer ratio
(%) should be?
9 Derive the condition for maximum torque in a three phase Find 1
induction motor?
A 3 phase, 50 Hz, six pole induction motor has a rotor resistance
of 0.1 Ω and reactance of 0.92 Ω. Neglect the voltage drop in
10 Analyzing 4
stator and assume that the rotor resistance is constant. Given that
the full load slip is 3%, the ratio of maximum torque to full load
torque is?
Short Answer Questions

Blooms
Course
S.No Question Taxonomy
Outcome
Level

What are the two types of 3-phase induction motors? Which

1 Knowledge 2
type is generally preferred?

2 Why induction motors are called “asynchronous”? Understand 2

Why the air-gap between stator core and rotor of an induction

3 Understand 1
motor is made very small?

Which type of induction motor develops higher starting

4 Knowledge 2
torque?

5 What is the condition for maximum torque? Knowledge 2

6 Define the slip? Understand 1

7 What is the slip of induction generator? Understand 1

8 When the slip is greater than one Knowledge 1

9 Why semi closed type slots are prepared in induction motor? Understand 2
 10 What is the rotor frequency? Understand 1

UNIT II

Long Answer Questions

Blooms
Course
S.No Question Taxonomy
Outcome
Level

Explain about the speed control of three phase induction

1 Explain 2
motor?

A 400 V, 50 Hz 30 hp, three-phase induction motor is drawing

50 A current at 0.8 power factor lagging. The stator and rotor
2 copper losses are 1.5 kW and 900 W respectively. The friction Evaluating 5
and wind age losses are 1050 W and the core losses are 1200
W. The air-gap power of the motor will be?

Explain about starting methods of a three phase induction

3 Understand 2
motor?

A balanced three-phase voltage is applied to a star-connected

induction motor, the phase to neutral voltage being V. The
stator resistance, rotor resistance referred to the stator, stator
4 leakage reactance, rotor leakage reactance referred to the Simplify 4
stator, and the magnetizing reactance are denoted by rs, rr, xs ,
xr and xm , respectively. The magnitude of the starting current
of the motor is given by

Explain about the construction of circle diagram and from that

5 explain how to find the performance of three phase induction Explain 2
motor?

A three-phase squirrel cage induction motor has a starting

torque of 150% and a maximum torque of 300% with respect
6 to rated torque at rated voltage and rated frequency. Neglect Determine 5
the stator resistance and rotational losses. The value of slip for
maximum torque is

7 Explain about the working principle of induction generator? Understand 2

 A three phase squirrel cage induction motor has a starting
current of seven times the full load current and full load slip
8 Apply 3
of 5% if an auto transformer is used for reduced voltage
starting to provide 1.5 per unit starting torque, the auto
transformer ratio (%) should be?
9 Define slip and slip speed of a three phase induction motor? Define 1

A three phase squirrel cage induction motor has a starting

10 current of seven times the full load current and full load slip of Simplify 4
5% If a star-delta starter is used to start this induction motor,
the per unit starting torque will be?
Short Answer Questions

Blooms
Course
S.No Question Taxonomy
Outcome
Level

1 1. Why an induction motor cannot run at synchronous Knowledge 1

speed?
2 2. What is slip of an induction motor? Knowledge 1

3. A 3-phase, 50 Hz squirrel cage induction motor runs

3 Understand 2
at 4% slip. What will be the frequency of rotor
currents?
4 4. What is the speed of rotor mmf of a 3-phase induction Understand 2
motor w.r.t. its stator mmf?
5 5. At what slip the torque developed in an induction Understand 2
motor will be maximum?
6 6. What is the relationship of developed torque of a 3- Understand 1
phase induction motor with the supply voltage?
7. Speed of a 3-phase induction motor is varied by
7 Understand 2
varying the supply frequency while v/f is kept
constant. How will the maximum torque vary?
8 8. How is the mechanical power output represented in Knowledge 1
the circuit model of an induction motor?
9 9. What measure can be taken for minimizing the effect Knowledge 1
of crawling?
10 10. Why the power factor of an induction motor is low at Understand 2
starting?
11 11. Why an induction motor cannot run at synchronous Knowledge 1
speed?
12 12. What is slip of an induction motor? Understand 2

13.
UNIT III

Long Answer Questions

Blooms Course
S.No Question Taxonom Outcom
y Level e

(a) Explain the operation of alternator on various loads for

various power factors loads. Understan
1 3
(b) A 3phase alternator has 2 slots/pole/phase and coil ding
span of 5 slot as full pitch

(a) Derive the expression for per phase EMF induced in a

3phase alternator? Explain the factors affecting the value
of EMF induced. Knowledg
2 3
(b) Give the winding details for a 3phase armature e
winding with following details: Pole = 4, Number of slots =
30, Double layer winding.

(a) What are harmonics? Explain how harmonics are

present in generated emf of alternator? What are the
effects of harmonics on generated emf?
Knowledg
3 (b) A star connected 3 phase alternator has an induced 3
e
emf of 400 V between the lines. Due to presence of third
harmonic component the phase voltage is 244 V. Find the
value of third harmonic voltage?

What are the effects of hunting on the performance of

4 synchronous motor and explain the method of Applying 3
suppressing the hunting

Draw the phasor diagram of a loaded alternator for the

5 following conditions:

(a) Lagging p.f (b) Leading p.f. (c) Unity p.f.

Explain the effect of armature reaction on the
Understan
6 performance of an alternator. How it depends on the load 2
d
pf.? Explain with suitable diagrams.

The stator of a 3-phase, 8-pole, and 750 r.p.m. alternator

7 has 72 slots, each of which contains 10 conductors. Analyze 4
Calculate the r.m.s. value of the e.m.f. per phase if the
 flux per pole is 0.1 Wb sinusoid ally distributed. Assume
full-pitch coils and a winding distribution factor of 0.96.

Find the regulation by the zero power factor method of 5

kVA, 6.6 kV, 3-phase, 50 Hz star-connected alternator at
full load, unity power factor having the following test
data:

Field current in 32 60 75 100 140

amperes
8 Apply 3
OC test terminal 3100 4900 6600 7500 8300
voltage in volts

Full load current 0 1850 4250 5800 7000

zero pf tests line
voltage in volts

Define voltage regulation of an alternator. Explain the

9 various factors which may affect the regulation of an Define 1
alternator.

Explain how open-circuit and short-circuit tests are

10 conducted on a synchronous machine. What is an air-gap Explain 2
line?

Explain the synchronous impedance method of

determining the voltage regulation of an alternator. Understan
11 2
Comment on the merits and limitations of this method. d
Why this method is considered as pessimistic method?

Explain the MMF method of determining the voltage Knowledg

12 1
regulation of alternator. e

Explain the Potier-triangle method of determining the Understan

13 2
voltage regulation of an alternator. d

An l1-kV, 100o-kV A, three-phase, star-connected

alternator has a resistance of 2  per phase. The open-
circuit curve and the characteristic with rated full-load
14 Apply 3
current at zero power factor are .given in the following
table. Find the voltage regulation of the alternator for full-
load current at power factor of 0.8 lagging.
 Field Current (A)----40 50 110 140 180

Lime Volts ---- 5800 7000 12500 3750

15000

Lime volts zero p.f.---- 0 1500 8500 10550

12500

Describe the slip test method-for the measurement of Xd

15 Describe 4
and Xq of synchronous machines.

Discuss Blondel's two-reaction theory of salient-pole

16 Discuss 6
synchronous machines.

Draw and explain the phasor diagram of a salient-pole

17 synchronous generator supplying a lagging power factor Elaborate 6
load.

Short Answer Questions

Blooms
Course
S.No Question Taxonomy
Outcome
Level

What type of rotor is adopted for high speed

Knowledge 1
1. alternators?

What will be the number of poles of a 50 Hz

Knowledge 1
2. alternator if it runs at its greatest speed?

What is the role of damper winding in synchronous

Understand 2
3. generator and motor?

What is the other name for distribution factor? Knowledge 1

4.
Calculate the pitch factor of the following winding:
Understand 2
5. 36 slots, 4 poles, coil span- 1to 8

Can DC generator be converted into an alternator? Knowledge 1

6.
What is meant by winding factor?
7.
Defined pitch factor and distributed factor? Define 1
8.
 Why alternator is rated in kVA rather than in kW? Remember
9.
What is synchronous reactance Xs Remember 1
10.
Why are distributed windings preferred over
Remember 1
11. concentrated windings?

At what voltage is the field of an alternator usually

Remember 1
12. excited?

What is meant by armature reaction of a

Remember 1
13. synchronous machine?

What is the effect of armature reaction for an

Remember 1
14. alternator for zero power factor lagging?

What is the effect of armature reaction for an

Remember 1
15. alternator for zero power factor leading?

What is the effect of armature reaction for an

Remember 1
16. alternator for unity power factor?

Name the different methods of voltage regulation of

Remember 1
17. alternator?

Why are the short circuit characteristics of an

Remember 1
18. alternator linear?

Which method of regulation is called pessimistic and

Remember 1
19. why?

What is the potier triangle? Remember 1

20.
What are the characteristics required for potier
Remember 1
21. method of computing voltage regulation?

Why an alternator with low value of SCR has lower

Remember 1
22. stability?

What are the losses take place in an alternator? Remember 1

23.
What is name of the test to determine the Xd and
Remember 1
24. Xq?

What is the order of Xd and Xq? Remember 1

25.

UNIT IV
Long Answer Questions

Blooms
Course
S.No Question Taxonomy
Outcome
Level

Derive an expression for power developed in a

1 Derive 2
non salient pole alternator.

State the conditions necessary for paralleling

2 Recall 1
alternators?

A 500 MVA, 3 phase, 6 pole, and 11 KV star

connected alternator is running in parallel with
other synchronous machine on 11000 V bus.
3 The synchronous reactance of the machine is 5 Solve 3
per phase. Calculate the synchronizing power
per mechanical degree at full load and 0.8 p.f.
lagging.

What do you mean by synchronizing

4 alternators? Describe any one method of Remember 1
synchronization

Explain the effects of varying excitation on

5 armature current and power factor in a Explain 2
synchronous motor. Draw V and Λ curves.

Explain the effect of change in excitation on the

6 Explain 2
parallel operation of two alternators.

Derive necessary equations for power

7 Show 2
developed in a synchronous motor.

Explain different torques of a synchronous

8 Understand 2
motor.

A synchronous generator operates on constant-

voltage constant frequency bus bars. Explain
the effect of variation of (a) excitation and (b)
9 steam supply on power output, power factor, Solve 3
armature current and load angle of the
machine. An 11 kV 3 phase star-connected
synchronous generator delivers 4000 k V A at
unit, power factor when running on constant
 voltage constant frequency bus bars. If the
excitation is raised by 20%, determine the kV A
and power factor at which the machine now
works. The steam supply is constant and the
synchronous reactance is 30 / phase. Neglect
power losses and assume the magnetic circuit
to be un-saturated.

With neat diagram explain the operation of

10 synchronous motor and justify statement Understand 2
`synchronous motor is not self-starting'.

Explain the V and inverted V curves of

11 Understand 2
synchronous motor

12 Write a short notes on synchronous condenser Illustrate 2

13 Draw the phasor diagram of synchronous motor Develop 3

Calculate the synchronizing power in kilowatts

per degree of mechanical displacement at full
load for a 1000 kV A, 6600 V, 0.8 power factor,
14 Solution 3
50 Hz, 8-pole, star-connected alternator having
a negligible resistance and a synchronous
reactance of 60%.

A 500 kV A, 3-Phase, 6-pole, 11 kV star-

connected alternator is running in parallel with
other synchronous machines9ri 11000 V bus.
15 The synchronous reactance of the machines is Solve 3
5 per phase. Calculate the synchronizing
power per mechanical degree at full load and
0.8 power factor lagging.

A 10 MV A, 3-phase alternator has an'

equivalent short-circuits reactance of 20%.
Calculate the synchronizing power of the
16 Determine 5
armature per mechanical degree phase
displacement when running in parallel with
10000 V, 50 Hz bus bars at 1500 r.p.m.

Short Answer Questions

 Blooms
Course
S.No Question Taxonomy
Outcome
Level

1 Why are alternators put in parallel? Understand 2

2 What is hunting? Understand 2

What are the conditions for parallel operation

3 Knowledge 1
of alternators?

What are the two methods by which two

4 Understand 2
alternators are put in parallel?

A machine with a large air-gap has a higher

5 Knowledge 1
synchronizing power. Why?

What is the effect of increasing the steam

6 admission to the prime mover connected to an Understand 2
alternator?

What is the effect of varying excitation of an

7 alternator running in parallel with another Knowledge 1
alternator?

8 What is meant by infinite bus-bars? Applying 3

A synchronous motor develops some

mechanical power, even if the field is
9 Understand 2
unexcited. Is it cylindrical or salient pole
machine?

Compare the salient pole rotor and cylindrical

10 rotor synchronous motor, which is more Knowledge 1
stable?

11 What is meant by synchronous condenser? Applying 3

12 What is the use of synchronous condenser? Understand 1

What is meant by hunting of synchronous

13 Remember 1
motor? How will you minimize it?

What are the advantages of synchronous

14 Remember 1
motors?
 What could be the reasons if a 3-phase
15 Remember 1
synchronous motor fails to start?

A synchronous motor develops some

mechanical power, even if the field is
16 Explain 2
unexcited. Is it cylindrical or salient pole
machine?

UNIT V

Long Answer Questions

Blooms
Course
S.No Question Taxonomy
Outcome
Level

Explain the operation of a single phase induction

1 Extend 2
motor using split phase technique

Show that the self-starting torque of a single phase

2 Show 2
induction motor is zero

Explain two field revolving theory for single phase

3 Explain 2
induction motor and give its Torque slip characteristic.

Using double field revolving field theory explain the

4 torque slip characteristic of a single phase induction Apply 3
motor and prove that it can’t produce starting torque.

The following test results were obtained in case of a

230 V single phase induction motor:

Free running test: 230V, 0.5 A, pf 0.18 lagging

Blocked rotor test: 58 V, 4.48 A, pf 0.58 lagging

Determine the approximate equivalent circuit of
5 Examine 4
motor.

Assume: (a) Stator & rotor copper losses at standstill

are equal

(b) Rotor leakage reactance referred to the stator &

stator leakage reactance are equal

6 What is split phase motor? Give the significance of Remember 1

 split phase?

Draw the circuit diagram of 1-phase capacitor start

and induction motor. Explain its working with all
7 Examine 4
constructional details. Sketch the performance
characteristics of the motor.

Explain shaded pole motor working priciple with neat

8 Explain 2
circuit diagram?

Short Answer Questions

Blooms Course
S.No Question
Taxonomy Level Outcome

Name the two theories regarding single phase

1 List 1
induction motor?

2 What is a split phase motor? Define 1

A single phase induction motor is provided

3 with a main winding and an auxiliary winding. Compare 2
Which of these having more resistive.

How is the direction of rotation of a single

4 Find 1
phase induction motor reversed?

Does the capacitor-start induction motor have

5 Tell 1
a high or low starting torque?

6 What is a shaded pole motor? Remember 1

7 What is a universal motor? Remember 1

Why compensating winding is provided in a

8 Remember 1
universal motor for ac operation?

Which single phase motor has the poorest

9 Remember 1
speed regulation?

10 Why the reluctance motor has low efficiency? Remember 1

OBJECTIVE QUESTIONS:

UNIT I&II
JNTUH:

1) Purpose of oil in a transformer is

a) Cooling b) insulation c) both a&b d) none
2) As load changes flux in a transformer is
a) Increases b)Decreases c)Constant d)None
GATE

3) The L.V winding of a 400/230 single phase transformer is to be connected to a 25 Hz, the supply
voltage should be?
a) 230 b)460 c) 115 d)65
4) A single phase transformer is to be switched to the supply to have minimum inrush current. The
switch should be closed at
a) Maximum supply voltage b) zero supply voltge
c) 1/√2 max supply voltage d) 1/2 max supply voltage
IES

5) In transformer which of the following statement is valid?

a) In O.C test Copper losses are obtained while in S.C test core losses are obtained.

b) In O.C test, current drawn is drawn at high power factor.

c) In S.C test, current is drawn at zpf

d) In an O.C test current is drawn at upf

6) A three phase transformer has rating of 20 MVA, 220/33 KV star delta with leakage reactance of
12%. The transformer reactance in ohms referred to each phase of L.V delta connected side is?
a) 23.5 b)19.6 c)18.5 d)8.7

JNTUH:

7) The desirable property of transformer core material is?

a) Low permeability and low hysteresis loss

b) High permeability and high hysteresis loss

c) High permeability and low hysteresis loss

d) Low permeability and high hysteresis loss

8) The efficiency of two identical transformers under load can be determined by

a) O.C Test b) S.C Test c)Back to Back test d)Any of the above

GATE

9) Which of the following will improve the mutual coupling between primary and secondary windings?
a)Transformer oil of high breakdown strength
 b) High reluctance magnetic core.

c)winding material of high resistivity

d)Low reluctance magnetic core

10) In a transformer if the iron loss and copper loss are 40.5Kw and 50 KW respectively, then at what
fraction of load will the maximum efficiency will occur?
a)0.8 b)0.57 c)0.7 d)0.9

IES

11) If the frequency of input voltage of a transformer is increased, keeping the magnitude of voltage
unchanged, then
a) Both eddy current and hysteresis loss will increase

b) Hysteresis loss will increase eddy current loss will decrease

c) Hysteresis loss will decrease, eddy current loss will increase

d) Hysteresis loss will decrease; eddy current loss will remain unchanged.

12) Two transformers when operating in parallel will share load depending upon?
a) Magnetizing current c) p.u impedance b) Leakage reactance d) efficiency

JNTUH:

13) A delta/delta transformer is connected to V/V transformer. The ratio of VA rating of V/V
connected transformer and delta/delta connected transformer is
a)57.77% b)100% c)86.66% d)73.2%

14) A 200/100 50 HZ transformer is to be excited at 40 Hz from 100 V side. For the same exciting current
the applied voltage should be?
a) 150 V b)80V c)100 V d)125V

GATE

15) When a transformer is first energized the transient current during first few cycles is
a) Less than full load current b) Equal to full load current

c) Equal to no load current d) much higher than full load current

16) A 25 KVA 2000/20, Two winding transformer is connected as auto transformer. The maximum
possible KVA rating of AT is
a) 125 b) 275 c) 375 d) 175

IES
17) A single phase transformer has p.u resistance 0.2 and p.u reactance 0.6. Its p.u voltage regulation at
0.8 pf lagging would be?
a) 0.52 b) 0.42 c) 0.62 d) 0.36

18) A 230/2300 v star/delta three phase transformer is rated at 230 KVA. Its rated secondary current per
phase is?
a) 33.33 A b)133.33 c) 66.66A d) 30.33

19) The following is the disadvantage of AT as compared to two winding transformer is?
a) Power rating is greater? b) Efficiency is low

c) Conductive isolation is not present. d) Voltage regulation is low.

20) A 10 kVA 400/200 single phase transformer with %R = 3% and %X= 6% is supplying a current of 50 A
to a R load. The value of Load voltage is?
a)194V b) 390V d)192V d)196V

GATE

21) An AT having K=0.8 supplied a load of 10Kw. The power transferred inductively from primary to
secondary is?
a)10KW b)8 KW c)2 Kw d)0

22) Which three phase connection can be used in a transformer to introduce a phase difference of 30
degrees between output and corresponding input line voltages.
a)star-star b)star-delta c)delta-delta d)delta-zigzag

IES

23) Purpose of laminations in a transformer is

a)to reduce hysteresis losses b)to reduce copper losses

c)to reduce eddy current losses d)none

24) As load changes power in a transformer is

a)Increases b)Decreases c)Constant d)None

JNTUH:

25) slip of an induction motor at starting condition is

a)1 b)0 c)-1 d)none

26) If the induction motor is running at synchronous speed then the slip value is
a)1 b)0 c)-1 d)none

GATE

27) slip of an induction generator is

a)1 b)0 c)-1 d)none

28) core of a transformer should be

a)Ferro b)paramagnetic c)diamagnetic d)none

IES

29) OC test is conducted on a transformer to find

a) Iron losses b) copper losses c) total losses d) none

30) SC test is conducted on a transformer to find

a) Iron losses b) copper losses c) total losses d) none

31) A single-phase transformer has no-load loss of 64 W, as obtained from an open-circuit test. When a
short-circuit test is performed on it with 90% of the rated currents flowing in its both LV and HV
windings, the measured loss is 81 W. The transformer has maximum efficiency when operated at
(GAT 2016)
a) 50.0% of the rated current. b) 64.0% of the rated current.
c) 80.0% of the rated current. d) 88.8% of the rated current.
32) Leakage flux in an induction motor is
(a) flux that leaks through the machine
(b) flux that links both stator and rotor windings
(c) flux that links none of the windings
(d) flux that links the stator winding or the rotor winding but not both
33) A 4-pole induction motor, supplied by a slightly unbalanced three-phase 50 Hz source, is rotating at
1440 rpm. The electrical frequency in Hz of the induced negative sequence current in the rotor is
(a) 100 (b) 98 (c) 52 (d) 48

34) If an ideal transformer has an inductive load element at port 2 as shown in the figure below, the
equivalent inductance at port 1 is

35) If the star side of the star-delta transformer shown in the figure is excited by a negative sequence
voltage, then
(a) VAB leads Vab by 600 (b) VAB lags Vab by 600

(c) VAB leads Vab by 300 (d) VAB lags Vab by 300
 36) A single-phase 400V, 50Hz transformer has an iron loss of 5000W at the condition. When operated
at 200V, 25Hz, the iron loss is 2000W. When operated at 416V, 52Hz, the value of the hysteresis loss
divided by the eddy current loss is (Answer 1.4423)
37) A DC shunt generator delivers 45 A at a terminal voltage of 220V. The armature and the shunt field
resistance are 0.01 ohms and 44 ohms respectively. The stray losses are 375W. The percentage
efficiency of the DC generator is _____ (Answer 86.84%)
38) A single-phase, 22kVA, 2200V/220, 50Hz, distribution transformer is to be connected as an auto-
transformer to get an output voltage of 2420 V. Its maximum kVA rating as an auto-transformer is
(A) 22 (B) 24.2 (C) 242 (D) 2420

UNIT III

1. Alternator operates on the principle of

a) electro-magnetic induction b) self-induction

c) Mutual induction d) b (or) c

Answer: A

2. In a synchronous machine, if the field flux axis is ahead of the armature field axis in the direction of
rotation, the machine operating is
a) Synchronous motor b) Synchronous generator

c) Asynchronous motor d) Asynchronous generator

Answer: B

3. In small a.c. generators

a) Armature is revolving member

b) The magnet field is produced by d.c.electro-magnets placed on the stationary member

c) The current induced in the rotating armature is collected by means of brushes and slip-rings
on the revolving member (rotor) d) All of the above.

Answer: A

4. In a.c. rotating machines, the generated e.m.f.,

 a) is in phase with working flux  b) leads  by 900

c) lags  by 900 d) lags  by 1800

Answer: C

5. The stator of an alternator gets overheated due to

a) Open phase b) unbalanced currents in the phases

c) Improper alignment of the rotor d) any one (or) more of the above

Answer: D

6. An exciter for an alternator is a small

a) d.c. series generator b) d.c. shunt generator

c) d.c. compound generator d) d.c. shunt (or) compound generator

Answer: B

7. In a large synchronous generator, dampers are provided in order to

a) Increase stability b) dominate harmonic effects

c) Reduce voltage fluctuations d) reduce frequency fluctuations

e) Both (a) and (b)

Answer: E

8. An alternator drive by a steam turbine is known as a

a) turbo-alternator b) hydro-generator

c) steam turbine d) none of the above

Answer: A

9. Turbo-alternators are generally employed to run at ________ r.p.m.

a) 500 b) 1000 c) 1500 d) 3000 e) 1500 (or) 3000

Answer: D

10. Hydro-generators are generally employed to run at _________ r.p.m.

a) 500 b) 1000 c) 1500 d) 3000

Answer: A

11. The high speed turbo-alternator has rotor of ____________ diameter and _______ axial length in
comparison to those of rotor for a low speed hydro-generator.
a) smaller, smaller b) larger, smaller
 c) smaller, larger d) larger, smaller

Answer: C

12. The rotor preferred for alternators applied to hydraulic turbines are _________ type. (Salient pole
type)
13. Winding used for a.c. machines are ____________
a) open winding b) closed winding

c) semi-open winding d) semi-closed winding

Answer: A

14. Closed windings may be

a) Single layer b) Double layer

c) Both single layer and double layer d) All of these

Answer: A

15. A 3-pase machine has 48 slots and 10 poles. This machine can have ________ winding.
a) Integral-Slot winding b) Fractional Slot winding c) None of the above

Answer: B

16. To eliminate the 5th harmonic from the e.m.f. generator in an alternator, the pitch factor will be
______________
a) 4/5 b) 5/4 c) 5/6 d) 6/5

Answer: A

17. In an alternator, the use of short pitch coils having pitch of 1600 will eliminate _____________
a) 3rd b) 5th c) 7th d) 9th

Answer: D

18. Harmonics in the e.m.f. generated in an alternator can be reduced by

a) Skewing the slots b) Chamfering the salient pole tips

c) Using distributed winding d) All of the above

Answer: D

19. Chording and distribution of armature windings for a.c. machines results in
a) reduction in air gap mmf harmonics
b) reduction in fundamental component of induced e.m.f.
c) increase in fundamental component of induced e.m.f.
d) reduction in noise and machine size
e) both a and b
Answer: E
20. In an alternator, the armature reaction is considered to be equivalent to a fictitious
a) Reactance b) resistance c) impedance d) admittance

Answer: A

21. Drop in terminal voltage of an alternator due to armature reaction is counted by

a) damper winding b) effect of saliency

c) increased prime-mover output d) automatic voltage regulator

Answer: A

22. Synchronous reactance of alternator represents

a) armature reactance and leakage reactance
b) a reactance operating at synchronous speed
c) field winding reactance
d) a reactance connected in series with a synchronous generator
Answer: A

23. As the leading power factor of the load of an alternator decreases, the magnitude of generated
voltage required to give rated terminal voltage
a) Increases b) decreases c) remains unchanged

Answer: B

24. In a synchronous generator delivering lagging power factor load

a) The excitation e.m.f. leads terminal voltage by the power angle
b) The excitation e.m.f. lags the terminal voltage by the power angle
c) Excitation e.m.f. leads the terminal voltage by the power factor angle
d) None of the above
Answer: A

25. The power factor on which alternator operates depends on

a) Speed of the prime-mover b) Nature of the load being connected
c) Armature losses d) Copper losses
Answer:B

26. Unbalanced 3-phase stator currents cause

a) vibrations heating of rotor
b) double frequency current in the rotor c) all of the above
Answer: C

27. In a three phase synchronous generator, working at UPF the main field axis 900 leading with
armature field axis
28. The KVA rating of an alternator delivering a load of 1000KW at 0.8 p.f lag is 1000/0.8
29. In modern alternators brushless excitation is preferred to avoid sparking
30. The synchronous reactance of an synchronous generator is sum of armature leakage and reaction
reactance
31. Skew of rotor bar eliminates hunting
32. In a synchronous generator delivering lagging power factor load
a. The excitation emf leads terminal voltage by the power angle.
b. The excitation emf lags the terminal voltage by the power angle.
c. Excitation emf leads the terminal voltage by the power factor angle.
d. None of the above.

33. When the alternator is operating on no-load the power supplied by the prime-mover is mainly
consumed in meeting
a) Copper loss b) core loss b) Bearing friction loss
c) windage loss d) all of the above losses
34. The power factor on which an alternator operates depends on the
a) speed of the prime-mover b) Nature of the load being supplied
c) armature losses d) copper losses
35. Unbalanced 3-phase stator currents cause
a) Vibrations b) Heating of rotor
c) Double frequency currents in the rotor d) All of the above

36. Overheating of windings of generator

a) reduces the generated voltage b) reduces the power factor
c) reduces the life of the machine d) does not have any significant effect
37. The regulation of an alternator is defined as the
a) Increase in terminal voltage when full load is thrown off, assuming field current and speed
remaining the same.
b) Fall in terminal voltage when full load is thrown off, assuming field current and speed
remaining unchanged.
c) The change in terminal voltage under the conditions of maximum and minimum excitations.
d) None of the above.
38. Regulation of an alternator supplying resistive or inductive load is
a) Always +ve b) always –ve
c) either of the above or zero d) none of the above
39. The regulation of an alternator is likely to be negative in case of _________ load.
a) Resistive b) inductive
c) Capacitive d) any type of
40. A leading pf load on an alternator implies that its voltage regulation shall be
a) Positive b) Negative
c) Zero d) any one of these
41. The synchronous impedance method of determination of regulation of an alternator is also said to be
the pessimistic method as it gives the value of synchronous impedance always
a) More than its actual value under normal condition
b) Less that its actual value under normal condition
c) Equal to synchronous reactance.
42. Synchronous impedance or emf method gives more regulation in comparison to mmf method
because in this method
a) armature reaction is considered negligible.
b) Saturation effect is ignored
c) Saturation effect is taken into account.
43. The short-circuit characteristic of an alternator is
a) always linear
b) always non-linear
c) either of a or b
d) none of these
 44. Under short-circuit conditions, the power factor of an alternator is
a) unity
b) almost zero lagging
c) almost zero leading
d) none of the above
45. Modern alternators are designed to have poor regulation as it
a) increases the value of short-circuit current.
b) Limits the value of short-circuit current
c) Increases the efficiency of operation
d) Both a and c
The phasor diagram by ASA method gives
e) Reliable results for both regulation and power angle of a salient pole synchronous
generator
f) Reliable result for power angle but erroneous result for regulation.
g) Reliable result for regulation but erroneous result for power angle.
h) Erroneous results for both regulation and power angle of a salient-pole synchronous generator.
46. The experimental data required for Potier method of determination of voltage regulation of an
alternator are
a) no-load curve and zero pf curve
b) no-load curve, short-circuit data
c) short-circuit data and zero pf curve
d) none of the above
47. Which of the following methods is best for determining the voltage regulation of alternators?
a) EMF method b) MMF method
c) Potier or Zero pf method d) none of the above
48. Armature reaction mmf and leakage reactance of a synchronous machine are determined by
a) open circuit and short-circuit tests
b) open circuit and zero pf tests
c) open circuit test only
d) zero pf test only
49. The four methods of calculation of voltage regulation of a 3-phase alternator are
a) EMF method
b) Saturated synchronous reactance method
c) New ASA method
d) MMF method
50. The correct sequence of the ascending order of the values of regulation obtained by these methods is
a) 3,4,2,1 b) 4,3,1,2 c) 3,4,1,2 d) 4,3,2,1
51. A round rotor synchronous generator has a leakage reactance of 10%, armature reaction reactance of
90% and negligible armature resistance. With the machine initially running at rated speed and
terminal voltage of 1.0 pu, a 3-phase short-circuit is applied. The sustained armature current will be
a) 1.25 pu. b) 1.11 pu. c) 1.0 pu. d) 0.9 pu.
GATE/IES PREVIOUS QUESTIONS

1. Distributed winding and short chording employed in AC machines will result in GATE-2008
(a) Increase in emf and reduction in harmonics (b) Reduction in emf increase in harmonics

(c) Increase in both emf and harmonics (d) Reduction in both emf and harmonics

Answer:D
2. A rotating electrical machine having its self-inductance of both the stator and the rotor windings,
independent of the rotor position will be defiantly not develop GATE-2004
(a) Starting torque (b) Synchronizing torque

(c) Hysteresis torque (d) Reluctance torque

Answer:C

3. Two magnetic poles revolve around a stationary armature carrying two coil (c1− c’1, c2 − c’2) as
shown in the figure. Consider the instant when the poles are in a position as shown. Identify the
correct statement regarding the polarity of the induced emf at this instant in coilsides c1 and c2.

(a) • in c1, no emf in c2 (b)  in c1, no emf in c2

•
(c) in c2, no emf in c1 (d)  in c2, no emf in c1

Answer:A

4. A 100 kVA, 415 (line), star-connected synchronous machine generates rated open circuit voltage of
415 V at a field current of 15 A. The short circuit armature current at a field current of 10A is equal
to the rated armature current. The per unit saturated synchronous reactance is GATE-2007
(a) 1.731 (b) 1.5 (c) 0.666 (d) 0.577

Answer:D

5. The synchronous speed for the seventh space harmonic mmf wave of a 3-phase, 8 pole, 50 Hz
induction machine is GATE-2004
(a) 107.14 rpm in forward direction

(b) 107.14 rpm in reverse direction

(c) 5250 rpm in forward direction

(d) 5250 rpm in reverse direction

 Answer:A

6. A 500 MW 3-phase Y-connected synchronous generator has a rated voltage of 21.5 kV at 0.85 pf.
The line current when operating at full load rated conditions will be GATE-2004
(a) 13.43 kA (b) 15.79 kA

(c) 23.25 kA (d) 27.36 Ka

7. A synchronous generator is feeding a zero power factor (lagging) load at rated current. The
armature reaction is GATE-2006
(a) Magnetizing (b) demagnetizing (c) cross-magnetizing (d) Non of the above

Answer:B

8. The two-bright and one dark lamp method is used for

a. determination of phase sequence
b. synchronizing of 3-phase alternators
c. synchronizing of single phase alternators
d. transfer of load
9. Desirable feature for successful parallel operation of two alternators is that both should have
a) Same resistance
b) Same reactance
c) High reactance in comparison to resistance
d) Low reactance in comparison to resistance
10. Synchronizing current means
a. The total current supplied to the load by the alternators operating in parallel
b. The current supplied by the synchronous generator
c. The current circulating in the local circuit of two alternators operating in parallel
which brings the alternators in synchronism once they are out of it.
d. None of the above.
11. When two alternators are operating in proper synchronism, the synchronizing power will be
a) Zero
b) Maximum
c) Minimum
d) Sum of the output of the two alternators

12. If the voltage of one of the two machines operating in parallel suddenly falls
a. both the machines will stop
b. the machine whose voltage has suddenly decreased, will stop
c. the synchronous torque will come into operation to restore synchronism
d. None of the above.
13. Synchronizing torque will come into operation whenever
a. There is a difference in the magnitude of voltages.
b. There is a phase difference in the voltages.
c. There is a frequency difference between the two voltages..
 d. Excitation of one of the alternators is changed.
e. In all of the above cases.
14. If the excitation of one of the alternators operating in parallel is increased while keeping input to its
prime-mover unchanged then the
a. Reactive components of the output will change.
b. active components of the output will change
c. Power factors of the alternators will not change.
d. kva supplied by the alternators will not change
15. Two alternators are operating in parallel. If the power input to the prime-movers of both the
alternators is increased, this will affect change in
a. generated emf
b. frequency
c. terminal voltage
d. all of these
16. If the power input to an alternator operating in parallel with another alternator is increased keeping
excitation constant, then
a. it will share more load and relieve the other alternator of its load
b. the alternators will be out of synchronism
c. it will share less load
d. the speed of the alternators will increase
17. Two alternators are operating in parallel and sharing a common load. For increasing the load shared
by one of them
a. power input is kept constant and excitation is increased
b. power input is kept constant and excitation is reduced
c. power input is increased keeping excitation constant
d. power input is reduced keeping excitation constant
18. When two alternators are operating in parallel, if the power input to one of the alternators is cut-off,
the alternator will
a. continue to run as a synchronous motor rotating in the same direction
b. continue to run as a synchronous motor rotating in the opposite direction
c. stop running
d. get damaged due to burning of stator and rotor windings
19. An infinite bus-bar has
a. constant voltage
b. constant frequency
c. infinite voltage
d. both a and b
e. both b and c
20. When two alternators are operating in parallel, if the power input to one of the alternators is cut-off,
the alternator will
a. Continue to run as a synchronous motor rotating in the same direction
b. Continue to run as a synchronous motor rotating in opposite direction
c. Stop running
d. Get damaged due to burning of stator and rotor windings
21. A stationary alternator should not be connected to the live bus-bar because
a. it is likely to operate as a synchronous motor
b. it will get short-circuited
c. it will reduce bus-bar voltage
d. all of the above
22. An alternator connected to an infinite bus for a given excitation voltage, will develop maximum
output power when the power angle  and internal angle  are related as
a)  = 1800 –  b)  = 900 –  c)  =  d)  = 1800 – 2

23. An alternator connected to an infinite bus, for a given excitation, will develop maximum electro-
magnetic power when the power angle  and internal angle  are related as
a)  = 1800 –  b)  =  c)  = 1800 – /2 d)  = 1800 – 2
24. If the prime-motor of an alternator supplying load to an infinite bus is suddenly shut down, then it
will
a. stop
b. continue to run as an alternator
c. continue to run as a synchronous motor in the reverse direction
d. continue to run as a synchronous motor in the same direction
25. A salient-pole synchronous generator connected to an infinite bus will deliver maximum power at a
power angle of
a)  = 0 b)  = 900 c)  = 450 d)  =75
26. A 3-phase synchronous generator is feeding rated power to an infinite bus. If its excitation fails, then
it acts as a
a) synchronous motor b) synchronous generator
c) Reluctance generator d) induction generator
27. A 3-phase alternator is supplying power to infinite bus at lagging pf. With constant steam input,
alternator excitation is increased with this
a. load angle  decreases and pf increases
b.  increases and pf decreases
c. both  and pf decreases
d. both  and pf increases
28. An alternator is synchronized with infinite bus. Now its field current is increased. With this,
alternator armature current
a. increases with zero pf lagging
b. increases with zero pf leading
c. decreases with zero pf lagging
d. decreases with zero pf leading
29. An alternator is synchronized with infinite bus. Now it its field current is decreased, then its armature
current
a. increases with zero pf lagging
b. decreases with zero pf leading
c. increases with zero pf leading
d. increases at any value of pf
30. The alternators are operated in parallel because it
 a) increases the reliability of supply
b) makes the repairing economical and convenient
c) is easy to install an additional unit as and when required
d) All of the above.
31. Which of the following methods used for synchronizing of 3-phase synchronous generators is
considered best one?
a. three dark lamp method
b. two-bright and one dark lamp method
c. Synchroscope
d. none of these
32. While synchronizing a 3-phase alternator to the bus-bar the paralleling switch should be closed
a. just before the pointer reaches the vertical position when moving in the fast direction
b. just after the pointer passes the vertical position when moving in the fast direction
c. when pointer indicates fast position
d. when pointer indicates slow position
33. The division of active power amongst alternators running in parallel depends upon
1. speed-load characteristics of prime-movers
2. volt-ampere characteristics of alternators
3. excitation voltages of alternators
From these, the correct answer is
a) a, b b) a, c
c) b, c d) all of these
34. Two alternators of ratings 200 KVA and 300 KVA, working in parallel, are driven by prime-movers
whose speed regulations are 3% and 5% respectively. The governor settings give the same no-load
speed for the two prime-movers. A load of 190 KW will be shared by them respectively, as
a) 76 KW and 114 KW b) 114 KW and 76 KW
c) 100 KW and 90 KW d) 90 KW and 100 KW
35. A 3-phase synchronous machine is synchronized with an infinite bus. Now steam input to
synchronous machine is increased. With this, synchronous machine starts working as
a. alternator at a leading pf
b. alternator at a lagging pf
c. synchronous motor at a leading pf
d. induction generator at a lagging pf

GATE/IES PREVIOUS QUESTIONS

A stand alone engine driven Synchronous generator is feeding a partly inductive load. A
capacitor is now connected across the load to completely nullity the inductive current. For this
operating condition. GATE-
2003
(a) The field current and fuel input have to be reduced.

(b) The field current & fuel input have to be increased.

(c) The field current has to be increased & fuel input left unaltered.
 (d) The field current has to be reduced & fuel input left unaltered.

1. Two 3-phase, Y-connected alternators are to be paralleled to a set of common bus bars. The
armature has a per phase synchronous reactance of 1.7  and negligible armature resistance. The
line voltage of the first machine is adjusted to 3300 V and that of the second machine is adjusted to
3200 V. The machine voltages are in phase at the instant they are paralleled. Under this condition,
the synchronizing current per phase will be GATE-2004
(a) 16.98 A (b) 29.41 A (c) 33.96 A (d) 58.82 A

UNIT IV &V

1. An electric motor in which both the rotor and stator fields rotate the same speed is called
Synchronous motor.
The armature mmf in a synchronous motor aids the rotor mmf when the p.f. is Lagging

2. The maximum power in cylindrical and salient pole machine in obtained respectively at load angle
of 900& less than 900
3. A salient pole synchronous motor is fed from infinite bus, and it is running at no load. If its field
current is reduced to zero, then motor would ________________
a) Stop b) run at a reduced speed

c) Run at synchronous speed d) run above synchronous speed.

4. The angle between the synchronously rotating stator flux and rotor poles of a synchronous motor
is called _____________ angle.
a) Synchronizing b) Torque

c) Power factor d) Slip

5. If load angle of a 4-pole synchronous motor is 80 (elect), its value in mechanical degrees is 40
mechanical
6. Synchronous motor draws minimum current when the Power factor of the load is UPF
7. If the field of a synchronous motor is under excited, the power factor will be Lagging pf
8. An over excited synchronous motors draws currents at
a) Lagging p.f b) Leading p.f

c) Unity p,f d) Depends on the nature of the load.

9. With the increase in the excitation current of synchronous motor the power factor of the motor
will be increase and then decrease
10. A synchronous motor on no-load can be used as synchronous condenser when the p.f. is Leading
11. A synchronous motor is running clockwise. If the direction of its field current is reversed, the
motor would _____________
a) Come to stop b) Run in the reversed
 c) Run in the same direction but at a slightly reduced speed.

d) Run in the same direction but at a slightly reduced speed.

12. How do you reverse the direction of rotator on Synchronous motor?

The armature current of the synchronous motor has large values for ___________

a) Low excitation only

b) High excitation only

c) Both high and low excitation

13. In a 3-phase synchronous motor, the magnitude of field flux ,

a) Varies with speed

b) Varies with load

c) Remains constant at all loads

d) Varies with power factor

14. The locus of the armature current of a synchronous motor when the power developed is constant
is Semicircle
15. A synchronous motor without D.C excitation is called Induction Motor.
16. For a salient pole type synchronous motor operating at lagging p.f, the excitation emf E is given by
___________________
a) V cos  – Id X d (b) V cos  – Ia ra –Id X d

c) V cos  – raIq – Id X q (d) V cos  – raId – Iq X d

17. Why synchronous motors are not self-starting? Due to Alternating torque
18. In synchronous motor hunting is prevented by using Damper winding
19. A synchronous induction motor in normally fed with
(a) A.C to stator and rotor (b) A. C stator and D.C. to rotor

(c) D.C to stator and a.c to rotor. (d) Superimposed a.c and d.c to the stator.

20. For a given excitation, when the Power Circle touches the excitation circle, the power developed
by a synchronous motor will be
(a) Maximum (b) Minimum (c) Zero (d) None of the above

21. The radius of Power circle of synchronous motor with armature resistance? Phase operating with
V volts across the lines and power developed in zero is
a) V/ Ra b) V/ 2Ra c) 0 d) V/ 4Ra
22. When a 3-phase synchronous motor is driving a constant load torque and taking power from the
infinite bus at leading p.f, if the excitation is increased then,
(a) Armature current increases (b) Armature current decreases

(c) Armature current increases but p.f decreases.

(d) Armature current decreases but p.f increases.

23. A synchronous -induction motor

a) Starts as a synchronous motor but runs as an induction motor.

b) Starts as an induction motor but runs as synchronous motor

c) Starts as an induction motor but runs at double the synchronous speed.

d) Has the combined characteristics of synchronous motor and induction motor.

24. The rotor of a synchronous induction motor is star connected. The rotor is supplied with d.c.
excitation (Id) between one sliprings and other two sliprings short circuited the equivalent D.C. in
terms of a.c. current Ia is
a) Id = 2 Ia b) Id = Ia /2

c) Ia =  (3/2) Ia d) Id = 6 Icc

25. A synchronous motor, fed from an infinite bus, is working at half-full load. If an increase in its field
current causes a reduction in the armature current, then the motor is,
(a) Delivering reactive power to the bus at leading p.f

(b) Delivering reactive power to the bus at lagging p.f

(c) Absorbing reactive power from the bus at leading p.f

(d) Absorbing reactive power from the bus at lagging p.f

26. A synchronous motor is working on constant load and variable excitation such that the terminal
voltage/phase is V and generated emf/phase is Eo. The power factor of the machine will be
lagging, when
(a) sin (s - ) > Eo/V (b) sin () > Eo/V

(c) sin (s - ) = Eo/V (d) sin (s - ) < Eo/V

27. If S is the torque angle and  is the synchronous impendence angle, then the input to the
synchronous motor is maximum?
(a)  = (b) S =  –  (c)  = 2 (d)   =
 28. When the speed becomes more than the synchronous speed during hunting, the damper bar
develops
(a) Synchronous motor torque (b) single phase induction motor torque

(c) Induction motor torque (d) Induction generator torque.

29. What is the role of damper windings in case of synchronous motor?

30. When 3-phase synchronous motor with constant excitation is dividing some load taking power
from infinite bus at lagging p.f and if the shaft load is reduced then,
(a) Power angle decreases and power factor increases

(b) Power angle decreases and power factor also decreases.

(c) Power angle increase and power factor also decrees.

(d) Power angle increase and power factor also increases.

31. An alternator and a synchronous motor are connected to an infinite bus. Both are working at unity
p.f and reactive power handed by them is ____________
(a) both deliver it to the bus.

(b) Both absorb it from the bus.

(c) Alternator is delivering it and motor is absorbing it.

(d) Neither of these machines is delivering nor absorbing it.

34. Alternating & Rotating are the nature of flux produced by single phase and three phase supply
35. Is single-phase induction motor self starting No
36. Why single-phase induction motors are not self-starting? Because of alternating torque
37. How the single-phase induction motors are made self-starting?By placing a auxiliary winding
38. What are the two windings present on the stator? Main & Auxiliary winding
39. Which type of rotor is employed in single phase induction motors
(a) Slip ring (b) squirrel cage (c) Salient pole (d) none of the above

40. The main winding and auxiliary windings are placed at an angle to each other in stator 900
41. What is meant by split-phase? Create a one more phase
42. Is the auxiliary winding connected or disconnected under normal running conditions
43. What are the different types of single phase induction motors
44. What are the advantages of capacitor start and run induction motor when compared to capacitor
start induction motor.
45. Whether a d.c. series motor runs if it is connected to single phase ac supply?
46. If so Q.No.13 what are the adverse conditions?
47. The direction of rotation of shaded pole motor is from Un shaded to Shaded Part.
48. Compared to split phase motor a capacitor start motor has _________.
 (a) low starting torque (b) low running torque

(c ) same starting torque (d) higher starting torque

49. Draw the speed-torque characteristics of single-phase induction motor?

50. What are the two theories for explaining the peculiar behavior of single-phase induction motor?
Double field revolving theory & Cross field revolving Theory
51. What is the idea that the double field revolving theory used to explain single-phase induction
motor?
52. According to double field revolving theory if forward slip is S then backward slip is given by 2-S
53. Draw the vector diagram of Split phase induction motor.
54. Draw the vector diagram of Capacitor start induction motor
55. The single-phase induction motor that gives the highest starting torque is
(a) Split phase motor (b) Shaded pole motor

(c) Capacitor motor (d) repulsion start induction motor

56. Single phase induction motor basically possesses

(a) Low starting torque (b) High starting torque

(c) No starting torque (d) None of the above

57. Write the main application of single-phase induction motor.

58. The motor used in a fan is
(a) Capacitor start induction motor

(b) Capacitor start and run induction motor

(c) Split-phase induction motor

(d) Repulsion type induction motor

59. What is the need of compensating winding in A.C. series motor

60. What the difference is in consecutively -compensated and inductively compensated AC series
motors?
61. The current in the compensating winding is proportional to _______________and ____________
out of phase with it.
62. What is the method used to improve commutation in addition to commutation poles in AC series
motor.
63. Can series motor be made to run under no load conditions?
64. If so why in the above? (Q.No.31)
65. A universal motor can be run
(a) On dc supply (b) At different frequency (c) All the above.

66. What is the use of centrifugal switch in some single-phase induction motors?
67. To reverse the direction of split phase induction motor
(a) Either auxiliary or main winding terminals are reversed

(b) Both windings are reversed (c) One winding is disconnected

(d) None of the above

68. How can a universal motor be reversed?

69. What could be the reason if a split-phase motor fails to start and hum loudly?
70. What could be the reason if a split-phase induction motor runs too slow?
71. After the starting winding of a single phase induction motor is disconnected from supply it continues
to run on winding
(a) Rotor (b) compensating (c) field (d) main winding

What are the constructional differences in single-phase induction motor compared to three phase
induction motor?

72. Advantages of permanent magnet is Electrical Power is not required

73. In permanent magnet machines________________
74. Permanent magnet machines are suited to low torque power applications
75. Cogging phenomena is present in P.M D.C machines because of_______-
GATE/IES PREVIOUS QUESTIONS

Statement for Linked Answer Questions i and ii.

1. A synchronous motor is connected to an infinite bus at 1.0 pu voltage and draws 0.6 pu current at
unity power factor. Its synchronous reactance is 1.0 pu and resistance is negligible. The excitation
voltage (E) and load angle () will respectively be GATE-2008
(a) 0.8 pu and 36.860 lag (b) 08 pu and 36.860 lead

(c) 1.17 pu and 30.960 load (d) 1.17 pu and 30.960 lag

2. Keeping the excitation voltage same, the load on the motor is increased such that the motor current
increases by 20%. The operating power factor will become GATE-2008

(a) 0.995 lagging (b) 0.995 leading (c) 0.791 lagging (d) 0.848 leading

3. 3. A 3 phase, 400 v, 5kW, star connected synchronous motor having an internal reactance of 10  is
operating at 50% load, unity pf. Now, the excitation is increased by 1%. What will be the new load in
percent, if the power factor is to kept same? Neglect all lossed and consider linear magnetic circuit.
GATE-2006
(a) 67.9% (b) 56.9%

(c) 51% (d) 50%

4. A three-phase synchronous motor connected to ac mains is running at full load unity power factor. If
its shaft load is reduced by half, with field current held. constant, its new power factor will be
GATE-2007

(a) unity (b) leading

(c) lagging (d) dependent on machine parameters

GATE/IES PREVIOUS QUESTIONS

1. A single phase induction motor with only main winding excited would exhibit the following response
at synchronous speed GATE-2003
(a) Rotor current is zero

(b) Rotor current is non-zero and is at slip frequency

(c) Forward and backward totaling fields are equal

(d) Forward rotating field is more than

2. The type of single-phase induction motor having the highest power factor at full load is
GATE-2004
(a) shaded pole type (b) split-phase type

(c) capacitor-start type (d) capacitor-run type

3. For a single phase capacitor start induction motor which of the following statements is valid?
GATE-2006
(a) The capacitor is used for power factor improvement

(b) The direction of rotation can be changed by reversing the main winding terminals.

(c) The direction of rotation cannot be changed

(d) The direction of rotation can be changed by interchanging the supply terminals.

4. A single-phase, 230 V, 50 Hz, 4 pole, capacitor-start induction motor has the following stand-still
impedances
Main winding Zm= 6.0 + j4.0 

Auxiliary winding Za = 8.0 + j6.0  The value of the starting capacitor required to produce 900
phase difference between the currents in the main and auxiliary windings will be GATE-2004

(a) 176.84 F (b) 187.24 F (c) 265.26 F (d) 280.86 F

5. In a single phase induction motor driving a fan load, the reason for having a high resistance rotor is
to achieve GATE-2005
(a) low starting torque (b) quick acceleration

(c) high efficiency (d) reduced size

6. 230 V, 50 Hz, 4 pole, single-phase induction motor is rotating in the clockwise (forward) direction at
a speed of 1425 rpm. If the rotor resistance at standstill is 7.8, then the effective rotor resistance
in the backward branch of the equivalent circuit will be GATE-2008
(a) 2 (b) 4 (c) 78 (d) 156

7. A 200 V, 50 Hz, single-phase induction motor has the following connection diagram and winding
orientations shown. MM’ is the axis of the main stator winding (M1M2) and AA’ is that of the
auxiliary winding (A1A2). Directions of the winding axis indicate direction of flux when currents in the
windings are in the directions shown. Parameters of each winding are indicated. When switch S is
closed, the motor GATE-2009
(a) Rotates clockwise

(b) Rotates anticlockwise

(c) Does not rotate

(d) Rotates momentarily and comes to a halt

8. The armature resistance of a permanent magnet dc motor is 0.8. At no load, the motor draws 1.5A
from a supply voltage of 25 V and runs at 1500 rpm. The efficiency of the motor while it is operating
on load at 1500 rpm drawing a current of 3.5 A from the same source will be GATE-
2004
(a) 48.0% (b) 57.1% (c) 59.2% (d) 88.8%

8. In a stepper motor, the detent torque means GATE-2008

(a) Minimum of the static torque with the phase winding excited.

(b) Maximum of the static torque with the phase winding excited.

(c) Minimum of the static torque with the phase winding unexcited.

(d) ) Maximum of the static torque with the phase winding unexcited.

9. For a 1.80, 2-phase bipolar stepper motor, the stepping rate is 100 steps/second. The rotational
speed of the motor in rpm is GATE-2004
(a) 15 (b) 30 (c) 60 (d) 90

10. In relation to the synchronous machines, which one of the following statements is false? GATE-
2005
 (a) In salient pole machines, the direct- axis synchronous reactance is greater than the quadrature-
axis synchronous reactance.

a. The damper bars help the synchronous motor self-start.

b. Short circuit ratio is the ratio of the field current required to produce the rated voltage on
open circuit to the rated armature current.
c. The V-curve of a synchronous motor represents the variation in
11. The armature current with field excitation, at a given output power 5.A 3, 3 stack, variable
reluctance step motor has 20 poles on each rotor and stator stack. The step angle of this step motor
is GATE-2007
(a) 30 (b) 60 (c) 90 (d) 180

IX. WEBSITES:
1. www.jntuworld.com
2. http://nptel.ac.in/downloads/108105053/
3. http://uav.ece.nus.edu.sg/~bmchen/courses/EG1108_Transformers.pdf
4. http://www.iitkgp.ernet.in/
5. http://www.iitk.ac.in/
6. http://www.iitb.ac.in/
7. http://www.iitd.ac.in/

X. JOURNALS:
1. www.ieee.org
2. www.worldscientific.com
3. www.springer.com
4. www.sciencedirect.com

XI. LIST OF TOPICS FOR STUDENT SEMINARS:

1. Study of Losses & charactristics
2. Testing of Induction motor
3. Speed control of induction machines
4. Circle diagram construction

XII. CASE STUDIES/SMALL PROJECTS

1. Testing of transformer oil
2. Protection of transformer through relays
3. Speed control of induction motor