Scribd Logo
Upload

Welcome to Scribd!

  • 160 views

    GRAUER &amp WEIL (INDIA) LTD PDF

    Uploaded by

    Choice Organo
    This document provides information on Aluminium Paint to IS 2339, which is a two-pack oleo resinous general-purpose aluminium paint with good light reflection and moderate heat resistance up to 250°C. It can be used as a finishing coating on interior and exterior steel and wood work in mildly to moderately corrosive environments. The paint has a volume solids of 40%, recommended DFT of 20 microns, and theoretical spreading rate of 20 m2/L. Proper surface preparation and health and safety precautions are outlined.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    GRAUER &amp WEIL (INDIA) LTD PDF

    Uploaded by

    Choice Organo
    160 views2 pages
    This document provides information on Aluminium Paint to IS 2339, which is a two-pack oleo resinous general-purpose aluminium paint with good light reflection and moderate heat resistance up to 250°C. It can be used as a finishing coating on interior and exterior steel and wood work in mildly to moderately corrosive environments. The paint has a volume solids of 40%, recommended DFT of 20 microns, and theoretical spreading rate of 20 m2/L. Proper surface preparation and health and safety precautions are outlined.

    Original Title

    GRAUER & WEIL (INDIA) LTD.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information on Aluminium Paint to IS 2339, which is a two-pack oleo resinous general-purpose aluminium paint with good light reflection and moderate heat resistance up to 250°C. It can be used as a finishing coating on interior and exterior steel and wood work in mildly to moderately corrosive environments. The paint has a volume solids of 40%, recommended DFT of 20 microns, and theoretical spreading rate of 20 m2/L. Proper surface preparation and health and safety precautions are outlined.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    160 views2 pages

    GRAUER &amp WEIL (INDIA) LTD PDF

    Uploaded by

    Choice Organo
    This document provides information on Aluminium Paint to IS 2339, which is a two-pack oleo resinous general-purpose aluminium paint with good light reflection and moderate heat resistance up to 250°C. It can be used as a finishing coating on interior and exterior steel and wood work in mildly to moderately corrosive environments. The paint has a volume solids of 40%, recommended DFT of 20 microns, and theoretical spreading rate of 20 m2/L. Proper surface preparation and health and safety precautions are outlined.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    GRAUER & WEIL (INDIA) LTD.

    (Paints Division)

    ALUMINIUM PAINT TO IS 2339


    DESCRIPTION ALUMINIUM PAINT TO IS 2339 is an oleo resinous
    general-purpose aluminium paint two pack with good
    light reflection and moderate heat resistance. It
    withstands up to 250 °C

    TYPICAL USE As a finishing coating on interior and exterior steel


    and wood work in mild to moderately corrosive
    environment where light reflection and heat resistance
    is required.

    PRODUCT DATA
    APPLICATION .. Brush., Spray.

    VOLUME SOLIDS .. 40 %

    RECOMMENDED DFT .. 20 microns

    CORRESPONDING WFT . 50 microns

    THEORETICAL SPREADING

    AT ABOVE DFT . 20 m 2/Ltr

    DRYING – SURFACE DRY .. 2-4 hrs at 30ºC

    COLOUR .. Aluminium

    FINISH . Glossy

    OVERCOATING INTERVAL .. Min. when dry,

    Max. None

    FLASH POINT .. Above 30ºC

    THINNER . Do not dilute

    SHELF LIFE . 12 months

    J-01. …2.
    ::2:: ALUMINIUM PAINT TO IS 2339

    SURFACE PREPARATION. Ample ventilation should be provided. In


    confined spaces, circulate adequate supply of
    fresh air continuously during application and
    drying to ensure removal of all solvent vapors.

    If applied by brush, this should not be more


    than 4” wide. The paint must not be “worked”
    too much or it will become streaky and greyish.
    After the paint has been lain on, it should be
    laid off with light strokes and in one direction
    only

    HEALTH AND SAFETY As a general rule, avoid inhalation of solvent


    vapours or paint mist and contact of liquid paint
    with skin and eyes. Provide forced ventilation
    when working with solvent borne coating in
    confined spaces or stagnant air. Also provide
    respiratory, skin and eye protection. Follow
    local and national safety regulations.

    ISSUE AUGUST 2006.

    This cancels all previous Literature of the Product.

    Information of the leaflet is given on goodwill without warranty.

    Corban … Let Them Give Life to your Industry.

    J –01.

    Trust the leader in surface finishing I www.bombaypaints.com

    You might also like