TDA7292

40 W + 40 W stereo amplifier with mute and standby

Features
„ Wide supply voltage range (up to ± 33 V)
„ Split supply
„ High output power
„ 40 W + 40 W into 8 Ω
with VS = ±26 V and THD = 10%
„ No “pop” at turn on/off Multiwatt11
„ Mute (“pop”-free)
„ Standby feature (low Iq) Description
„ Short-circuit protection The TDA7292 is class-AB dual audio power
„ Thermal overload protection amplifier assembled in a Multiwatt package.
It is specially designed for high-quality sound
applications such as hi-fi music centers and
stereo TV sets.

Table 1. Device summary

Order code Operating Temp. range Package Packaging

TDA7292 0° to 70° C Multiwatt11 Tube

Figure 1. Applications circuit

+VS

1000µF
15K 1µF
MUTE/
ST-BY 3
5
IN (L) 7
+ 4 OUT (L)
1µF -
18K 4.7Ω
RL (L)
8 IN- (L)
100nF
15K 47K
18K
GND 9 560Ω
+5V µP
10 IN- (R) 560Ω

18K
1µF - 2 OUT (R)
IN (R) 11
+
4.7Ω
1 6 RL (R)
-VS 100nF

1000µF
D94AU085

May 2009 Doc ID 15775 Rev 4 1/22

www.st.com 22
Contents TDA7292

Contents

1 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

2 Electrical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.1 Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.2 Thermal data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.3 Electrical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

3 Characterization curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

4 Mute and standby modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

5 Applications information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
5.1 Applications with dual supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
5.2 Applications with single supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

6 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

7 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

2/22 Doc ID 15775 Rev 4

TDA7292 List of tables

List of tables

Table 1. Device summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Table 2. Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Table 3. Thermal data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Table 4. Electrical specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Table 5. Mute and standby thresholds on pin 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Table 6. Recommended values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Table 7. Document revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Doc ID 15775 Rev 4 3/22

List of figures TDA7292

List of figures

Figure 1. Applications circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Figure 2. Pin connection (top view) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Figure 3. Quiescent current vs Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Figure 4. Frequency response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Figure 5. Output power vs supply voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Figure 6. Output power vs supply voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Figure 7. Output power vs supply voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Figure 8. THD vs output power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Figure 9. THD vs output power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Figure 10. THD vs output power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Figure 11. Quiescent current vs voltage on pin 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Figure 12. Attenuation vs voltage on pin 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Figure 13. Crosstalk vs frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Figure 14. Power dissipation vs output power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Figure 15. Power dissipation vs output power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Figure 16. Power dissipation vs output power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Figure 17. Mute and standby thresholds on pin 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Figure 18. Test and applications circuit (dual supply) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Figure 19. PCB layout, solder side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Figure 20. PCB layout, component side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Figure 21. PCB component placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Figure 22. Typical applications circuit (single supply) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Figure 23. PCB layout, solder side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Figure 24. PCB layout, component side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Figure 25. PCB component placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Figure 26. Multiwatt11 outline drawing and dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

4/22 Doc ID 15775 Rev 4

TDA7292 Pin description

1 Pin description

Figure 2. Pin connection (top view)

11 IN+(1)
10 IN-(1)
9 GND
8 IN-(2)
7 IN+(2)
6 -VS
5 MUTE/St-By
4 OUTPUT(2)
3 +VS
2 OUTPUT(1)
1 -VS

TAB CONNECTED TO PIN 6 D95AU316

Doc ID 15775 Rev 4 5/22

Electrical specifications TDA7292

2 Electrical specifications

2.1 Absolute maximum ratings

Table 2. Absolute maximum ratings
Symbol Parameter Value Unit

VS DC supply voltage ±35 V

IO Output Peak Current (internally limited) 5 A
Ptot power Dissipation Tcase = 70°C 40 W
Top Operating temperature -20 to 85 °C
Tj Junction temperature -40 to 150 °C
Tstg Storage temperature -40 to 150 °C

2.2 Thermal data

Table 3. Thermal data
Symbol Parameter Min Typ Max Unit

Rth j-case Thermal resistance, junction to case - 1.5 - °C/W

2.3 Electrical specifications

Unless otherwise stated, the results in Table 4 below are given for the conditions:
VS = ±26 V, RL (load) = 8 Ω, RS (source) = 50 Ω, f = 1 kHz, GV = 30 dB, and Tamb = 25° C.
See also the test circuit in Figure 18 on page 14.

Table 4. Electrical specifications

Symbol Parameter Condition Min Typ Max Unit

VS Supply voltage range - ±8 - ±33 V

Iq Total quiescent current - - 50 130 mA
VOS Output offset voltage - -20 - 20 mV
Ib Non-inverting input bias current - - 500 - nA
THD = 10%:
RL = 8 Ω, VS = ±26 V - 40 -
RL = 4 Ω, VS = ±18 V 31
Po Output power W
THD = 1%:
RL = 8 Ω, VS = ±26 V - 30 -
RL = 4 Ω, VS = ±18 V 24
IPeak Peak output current Internally limited - 5 - A
THD Total harmonic distortion Po = 1 W - 0.02 - %

6/22 Doc ID 15775 Rev 4

TDA7292 Electrical specifications

Table 4. Electrical specifications (continued)

Symbol Parameter Condition Min Typ Max Unit

CT Crosstalk f = 1 kHz - 70 - dB
SR Slew rate - - 11 - V/ms
GOL Open-loop gain - - 80 - dB
eN Total input noise f = 20 Hz to 22 kHz - 4 - µV
Ri Input resistance - - 20 - kΩ
SVRR Supply voltage rejection ratio - - 75 - dB
Junction temperature at thermal
Tj - - 145 - °C
shut-down
Mute mode (see also Table 5 on page 13)
VTMUTE Mute/play threshold - -7 -6 -5 V
AMUTE Mute attenuation - - 75 - dB
Standby mode (see also Table 5 on page 13)
VTSTBY Standby/mute threshold - -3.5 -2.5 -1.5 V
ASTBY Standby attenuation - - 110 - dB
Iq_STBY Quiescent current in standby - - 8 - mA

Doc ID 15775 Rev 4 7/22

Characterization curves TDA7292

3 Characterization curves

Figure 3. Quiescent current vs Supply Voltage

Iq (mA)
55

50

Iq+

45

40
Iq-

35

30

8 10 12 14 16 18 20 22 24 26 28 30 32 34

Vs (+/-V)

Figure 4. Frequency response

Ampl (dB)
+5

+4
Vs=+/-20V
+3 Rl = 8 Ohm

+2 0dB = 1W

+1

+0

-1

-2

-3

-4

-5
10 20 50 100 200 500 1k 2k 5k 10k 20k 50k 200k

Freq(Hz)

8/22 Doc ID 15775 Rev 4

TDA7292 Characterization curves

Figure 5. Output power vs supply voltage

Pout (W)
32

28 Rl = 4 ohm
f = 1Kz
24 THD=10%

20

16

12
THD=1%
8

0
8 10 12 14 16 18 20
Vs (+/-V)

Figure 6. Output power vs supply voltage

Pout (W)
44
40
36 Rl = 6 Ohm
32 f = 1Kz
28
24
THD=10%
20
16
12
THD=1%
8
4
0
10 12 14 16 18 20 22 24
Vs (+/-V)

Figure 7. Output power vs supply voltage

Pout (W)

50

45
Rl = 8 Ohm
40 f = 1Kz
35

30 THD=10%

25

20

15
THD=1%
10

5
0
10 12 14 26 28 20 22 24 26 28 30
Vs (+/-V)

Doc ID 15775 Rev 4 9/22

Characterization curves TDA7292

Figure 8. THD vs output power

THD(%)
10

5
Vs=+/18V
2 Rl = 4 Ohm

0.5
f = 15KHz
0.2

0.1

0.05

0.02 f = 1KHz

0.01

0.005

0.002
200m 500m 1 2 5 10 20 50
Pout (W)

Figure 9. THD vs output power

THD(%)

10
5
Vs= +/-22V
2
Rl = 6 Ohm
1

0.5

0.2 f = 15KHz

0.1

0.05

0.02

0.01 f = 1KHz

0.005

0.002
200m 500m 1 2 5 10 20 50
Pout (W)

Figure 10. THD vs output power

THD(%)
10

5
Vs = +/-26V
2 Rl = 8 Ohm
1

0.5

0.2 f = 15KHz
0.1

0.05

0.02
f = 1KHz
0.01

0.005

0.002
200m 500m 1 2 5 10 20 50

Pout (W)

10/22 Doc ID 15775 Rev 4

TDA7292 Characterization curves

Figure 11. Quiescent current vs voltage on pin 5

Iq (mA)
100
90

80
70
Vs=+/-20V
60
Rl=8Ohm
50 0V = +Vs
40 Vi = 0

30
20

10
0
-10 -9 -8 -7 -6 -5 -4 -3 -2 -1 0
Vpin # 5 (V)

Figure 12. Attenuation vs voltage on pin 5

Attenuation (dB)
+10

+0

-10

-20 Vs= +/-20V

-30 Rl= 8 Ohm
-40 f =1KHz
-50 OdB = 1V
-60 0V = +Vs
-70

-80

-90

-100
-10 -9 -8 -7 -6 -5 -4 -3 -2 -1 -0
Vpin #5 (V)

Figure 13. Crosstalk vs frequency

Crosstalk (dB)
-30

-35

Vs=+/- 26V
-40
Rl = 8 Ohm
-45 Rs= 50 Ohm

-50

-55
Right to
-60 Left

-65

-70

Left to Right
-75

-80
20 50 100 200 500 1k 2k 5k 10k 20k

Frequency (Hz)

Doc ID 15775 Rev 4 11/22

Characterization curves TDA7292

Figure 14. Power dissipation vs output power

Pdiss(W)

40

35 Rl =4 Ohm
f = 1KHz
A
30 Vs= +/- 18V B
(A)

25 Vs= +/- 16V

(B)
Vs= +/- 14V
20 (C)
C
15

10

0
0.1 1 2xPout (W)
10 100

Figure 15. Power dissipation vs output power

Pdiss(W)
50
45 Rl =6 Ohm
A
40 f = 1KHz

35 Vs= +/- 24V (A)

Vs= +/- 22V (B)
30 B
Vs= +/-20V (C)
25
20 C
15
10
5
0
0.1 1 10 100
2xPout(W)

Figure 16. Power dissipation vs output power

Pdiss (W)
40

35 Rl =8 Ohm
f = 1KHz A
30 Vs= +/- 26V (A)
Vs= +/- 24V (B) B
25 Vs= +/-20V (C)

20
C
15

10

0
0.1 1 10 100
2xPout (W)

12/22 Doc ID 15775 Rev 4

TDA7292 Mute and standby modes

4 Mute and standby modes

Pin 5 (MUTE/STANDBY) controls the amplifier status by two different thresholds referenced
to +VS as given in Table 5 below. See also Table 4: Electrical specifications on page 6.

Table 5. Mute and standby thresholds on pin 5

Nominal voltage on pin 5,
Mode Remarks
VPIN5

> +VS - 2.5 V Standby Output stages turned off

> +VS - 6.0 V, < +VS - 2.5 V Mute Output stages turned on, amplifiers muted
< +VS - 6.0 V Play Amplifiers active

Figure 17. Mute and standby thresholds on pin 5

+VS
(V)

26

-VS
-26

VIN
(mV)

Vpin5
(V)

VS
VS-2.5
VS-6
VS-10

Iq
(mA)

VOUT
(V)

OFF PLAY STDBY PLAY OFF

STDBY STDBY

MUTE D04AU1570 MUTE MUTE MUTE

Doc ID 15775 Rev 4 13/22

Applications information TDA7292

5 Applications information

Warning: SOA protection:

If the TDA7292 is operated without a load connected to the

output terminals, the SOA protection circuit could be
activated when a high amplitude and high frequency signal is
applied to the input.
The frequency and amplitude of the signal able to trigger the
protection is a function also of the supply voltage level used.
If the above mentioned condition is possible when the
speakers are not connected, it is recommended to connect
the input to ground or add a dummy resistive load. For
example, a 1-kΩ / 1-W resistor can be used at Vcc = ±26 V. If a
lower supply voltage is used, the resistor value must be
decreased accordingly.

5.1 Applications with dual supply

Figure 18. Test and applications circuit (dual supply)

+VS

C4 C5
R2 C3 +VS
MUTE/
ST-BY 3
5
A R1 Q1 IN (L) 7
+ 4 OUT (L)
B
SW1 C1 -
ST-BY DZ R5 R7
RL (L)
8 IN- (L)
C8
R4 R3
GND 9 R6

SW2 A B
10 IN- (R) R9
MUTE
R8
C2 - 2 OUT (R)
IN (R) 11
+
R10
1 6 RL (R)
SW1 position SW2 position Mode -VS C9
B A Standby
B B Standby
C7 C6
A A Mute D94AU087B
A B Play

14/22 Doc ID 15775 Rev 4

TDA7292 Applications information

Table 6. Recommended values

Larger than Smaller than
Recommended
Component Purpose recommended recommended
value
value value

Decrease in DZ
R1 10 kΩ Mute circuit -
biasing current
VPIN5 shifted VPIN5 shifted
R2 15 kΩ Mute circuit
downwards upwards
VPIN5 shifted VPIN5 shifted
R3 47 kΩ Mute circuit
upwards downwards
VPIN5 shifted VPIN5 shifted
R4 15 kΩ Mute circuit
upwards downwards
R5, R8 18 kΩ Closed-loop gain Increase in gain -
R6, R9 560 Ω setting (1) Decrease in gain -
R7, R10 4.7 Ω Frequency stability Danger of oscillation Danger of oscillation
Higher low-
C1, C2 1 µF Input AC coupling -
frequency cutoff
Standby/mute time
C3 1 µF Larger on/off time Smaller on/off time
constant
Supply voltage
C4, C6 1000 µF - Danger of oscillation
decoupling
Supply voltage
C5, C7 0.1 µF - Danger of oscillation
decoupling
C8, C9 0.1 µF Frequency stability - -
Dz 5.1 V Mute circuit - -
Q1 BC107 Mute circuit - -
1. Closed-loop gain must be >29 dB

Doc ID 15775 Rev 4 15/22

Applications information TDA7292

Figure 19. PCB layout, solder side

Figure 20. PCB layout, component side

16/22 Doc ID 15775 Rev 4

TDA7292 Applications information

Figure 21. PCB component placement

5.2 Applications with single supply

Figure 22. Typical applications circuit (single supply)

+VS
D1 5.1V

R1 C1 R3 C5 C6
10K 1µF 15K 1000µF 0.1µF
MUTE 3
5
PLAY
5V Q1 IN (L) 7 C9 470µF
BS107 + 4 OUT (L)
0 C3 1µF -
MUTE R2 R4 R8 OUT
15K 30K 4.7Ω (L)
8 IN- (L)
C7
9 0.1µF
C2 R5
100µF C4 1µF 1K
IN (R) 11 + C10 470µF
2 IN- (R)
-
R6 R9 OUT
30K 4.7Ω (R)
10 OUT (R)
C8
1 0.1µF
6 R7
1K
GND
D96AU444A

Doc ID 15775 Rev 4 17/22

Applications information TDA7292

Figure 23. PCB layout, solder side

Figure 24. PCB layout, component side

18/22 Doc ID 15775 Rev 4

TDA7292 Applications information

Figure 25. PCB component placement

Doc ID 15775 Rev 4 19/22

Package mechanical data TDA7292

6 Package mechanical data

The TDA7292 comes in an 11-pin Multiwatt package.

Figure 26. Multiwatt11 outline drawing and dimensions

mm inch
DIM.
MIN. TYP. MAX. MIN. TYP. MAX. OUTLINE AND
A 5 0.197 MECHANICAL DATA
B 2.65 0.104
C 1.6 0.063
D 1 0.039
E 0.49 0.55 0.019 0.022
F 0.88 0.95 0.035 0.037
G 1.45 1.7 1.95 0.057 0.067 0.077
G1 16.75 17 17.25 0.659 0.669 0.679
H1 19.6 0.772
H2 20.2 0.795
L 21.9 22.2 22.5 0.862 0.874 0.886
L1 21.7 22.1 22.5 0.854 0.87 0.886
L2 17.4 18.1 0.685 0.713
L3 17.25 17.5 17.75 0.679 0.689 0.699
L4 10.3 10.7 10.9 0.406 0.421 0.429
L7 2.65 2.9 0.104 0.114
M 4.25 4.55 4.85 0.167 0.179 0.191
M1 4.73 5.08 5.43 0.186 0.200 0.214
S 1.9 2.6 0.075 0.102
S1 1.9 2.6 0.075 0.102
Multiwatt11 (Vertical)
Dia1 3.65 3.85 0.144 0.152

0016035 H

In order to meet environmental requirements, ST offers these devices in different grades of

ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.

20/22 Doc ID 15775 Rev 4

TDA7292 Revision history

7 Revision history

Table 7. Document revision history

Date Revision Changes

Nov-2004 1 Initial release.

Oct-2005 2 Inserted PC board and graphics.
Mar-2006 3 Ouput peak current changed.
Updated resistor value setting mute voltage in Figure 1 on
29-May-2009 4
page 1 and Table 5 on page 13.

Doc ID 15775 Rev 4 21/22

 TDA7292

Please Read Carefully:

Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.

UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.

Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.

ST and the ST logo are trademarks or registered trademarks of ST in various countries.

Information in this document supersedes and replaces all information previously supplied.

The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.

© 2009 STMicroelectronics - All rights reserved

STMicroelectronics group of companies

Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com

22/22 Doc ID 15775 Rev 4