Zaclient65 User Manual

User Guide for Zone Labs security software
version 6.5
Smarter Security TM
© 2006 Zone Labs, LLC. All rights reserved.
© 2006 Check Point Software Technologies Ltd. All rights reserved.
Check Point, Application Intelligence, Check Point Express, the Check Point logo, AlertAdvisor,
ClusterXL, Cooperative Enforcement, ConnectControl, Connectra, CoSa, Cooperative Security
Alliance, FireWall-1, FireWall-1 GX, FireWall-1 SecureServer, FloodGate-1, Hacker ID, IMsecure,
INSPECT, INSPECT XL, Integrity, InterSpect, IQ Engine, Open Security Extension, OPSEC, Policy
Lifecycle Management, Provider-1, Safe@Home, Safe@Office, SecureClient, SecureKnowledge,
SecurePlatform, SecurRemote, SecurServer, SecureUpdate, SecureXL, SiteManager-1,
SmartCenter, SmartCenter Pro, Smarter Security, SmartDashboard, SmartDefense, SmartLSM,
SmartMap, SmartUpdate, SmartView, SmartView Monitor, SmartView Reporter, SmartView Status,
SmartViewTracker, SofaWare, SSL Network Extender, TrueVector, UAM, User-to-Address Mapping,
UserAuthority, VPN-1, VPN-1 Accelerator Card, VPN-1 Edge, VPN-1 Pro, VPN-1 SecureClient,
VPN-1 SecuRemote, VPN-1 SecureServer, VPN-1 VSX, Web Intelligence, ZoneAlarm, Zone Alarm
Pro, Zone Labs, and the Zone Labs logo, are trademarks or registered trademarks of Check Point
Software Technologies Ltd. or its affiliates. All other product names mentioned herein are
trademarks or registered trademarks of their respective owners. The products described in this
document are protected by U.S. Patent No. 5,606,668, 5,835,726 and 6,496,935 and may be
protected by other U.S. Patents, foreign patents, or pending applications.
Zone Labs, LLC.

A Checkpoint Company
475 Brannan, Suite 300
San Francisco, CA 94107
ZLD -0422-0650-2006-0601
Contents
Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
Figures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi
Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii
About Zone Labs security software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiv

About this guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv
Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv
Zone Labs User Forum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv
Chapter 1 Installation and setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
System requirements and supported software . . . . . . . . . . . . . . . . . . . . . . . 2

Hardware requirements and supported operating systems . . . . . . . . . . . . . . . . . . . . 2
Supported protocols for e-mail protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Supported browser software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Supported IM clients . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Installing Zone Labs security software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Installing ZoneAlarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Installing Zone Labs security software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Upgrading from a previous version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Upgrading and the Windows XP SP2 Windows Firewall . . . . . . . . . . . . . . . . . . . . . 6
Upgrading and IMsecure myVault settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Upgrading and MailFrontier settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Configuring basic options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Configuring program access permissions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Joining the DefenseNet community . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Uninstalling Zone Labs security software . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Chapter 2 Zone Labs security software basics . . . . . . . . . . . . . . . . . . . . . . . . . 11
Tour of the Zone Labs security software Control Center . . . . . . . . . . . . . . . 12

Getting around the Control Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Using the dashboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
System Tray icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Shortcut menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Using the Status tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Understanding Zones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Zones manage firewall security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Zones provide program control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Responding to alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
User Guide for Zone Labs security software i

Contents
New Program alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

New Network and VPN alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Setting product preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Setting update options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Setting your password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Backing up and restoring security settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Setting general product preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Setting contact preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Setting product display and proxy server options . . . . . . . . . . . . . . . . . . . . . . . . . 25
Creating an online fraud protection profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Licensing, registration, and support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Updating your product license . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Registering Zone Labs security software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Accessing technical support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Chapter 3 Networking with Zone Labs security software. . . . . . . . . . . . . . . . 29
Configuring a new network connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Using the Network Configuration Wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Disabling the Network Configuration Wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Using the Wireless Network Configuration Wizard . . . . . . . . . . . . . . . . . . . . . . . . 31
Disabling the Wireless Network Configuration Wizard . . . . . . . . . . . . . . . . . . . . . . 31
Integrating with network services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Enabling file and printer sharing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Connecting to network mail servers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Enabling Internet Connection Sharing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Configuring your VPN connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Supported VPN protocols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Configuring your VPN connection automatically . . . . . . . . . . . . . . . . . . . . . . . . . 35
Configuring your VPN connection manually . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Adding a VPN gateway and other resources to the Trusted Zone . . . . . . . . . . . . . . . 37
Removing a VPN gateway from a blocked range or subnet. . . . . . . . . . . . . . . . . . . 37
Allowing VPN protocols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Granting access permission to VPN software . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Chapter 4 Firewall protection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Understanding Firewall protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Choosing security levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Setting the security level for a Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Setting advanced security options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Setting gateway security options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Setting ICS (Internet Connection Sharing) options . . . . . . . . . . . . . . . . . . . . . . . 42
Setting general security options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Setting network security options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Setting wireless network security options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Managing traffic sources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Viewing the traffic source list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Modifying traffic sources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Adding to the Trusted Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Adding to the Blocked Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
User Guide for Zone Labs security software ii

Contents
Viewing logged Firewall events. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Blocking and unblocking ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Default port permission settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Adding custom ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Understanding expert firewall rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

How expert firewall rules are enforced . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Expert firewall rule enforcement rank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Creating expert firewall rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Creating groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Creating a location group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Creating a protocol group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Creating a day/time group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Managing Expert Firewall Rules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Viewing the Expert Rules list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Editing and re-ranking rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Chapter 5 Program control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Understanding Program Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Setting program permissions automatically . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Setting program permissions manually . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Setting general program control options . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Setting the program control level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Configuring OSFirewall protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Enabling Component Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Setting the SmartDefense Advisor level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Enabling the automatic lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Viewing logged program events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Viewing logged OSFirewall events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Configuring advanced program settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Setting global program properties. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Setting access permissions for new programs . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Setting permissions for specific programs . . . . . . . . . . . . . . . . . . . . . . . . . 76

Using the programs list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Adding a program to the programs list. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Granting a program permission to access the Internet . . . . . . . . . . . . . . . . . . . . . 80
Granting a program permission to act as a server . . . . . . . . . . . . . . . . . . . . . . . . 81
Granting send mail permission to a program . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Setting program options for a specific program . . . . . . . . . . . . . . . . . . . . . 82

Setting Advanced Program Control options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Disabling Outbound Mail protection for a program. . . . . . . . . . . . . . . . . . . . . . . . 82
Setting Filter options for a program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Setting authentication options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Setting passlock permission for a program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Managing program components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Creating expert rules for programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Creating an expert rule for a Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Sharing expert rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
User Guide for Zone Labs security software iii

Contents
Chapter 6 Spyware and Virus protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Spyware and Virus Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

Turning on virus and spyware protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Scheduling a scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Updating virus and spyware definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Customizing virus protection options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

Specifying scan targets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
On-Access scanning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
E-mail Scanning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Enabling automatic virus treatment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Specifying virus detection methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Customizing spyware protection options . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Enabling automatic spyware treatment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Specifying spyware detection methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Excluding spyware from scans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Spy Site Blocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Preventing spyware attacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Performing a virus scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

Understanding virus scan results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Treating virus filesmanually . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Repairing files in an archive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Submitting viruses and spyware to Zone Labs for review . . . . . . . . . . . . . . . . . . . 102
Viewing logged virus events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Performing a spyware scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104

Understanding spyware scan results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Errors in spyware scan results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Viewing items in quarantine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Viewing logged spyware events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Viewing virus and spyware protection status . . . . . . . . . . . . . . . . . . . . . . . 109

Monitoring virus protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Monitoring Coverage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Monitoring in ZoneAlarm, ZoneAlarm Pro, and ZoneAlarm Anti-Spyware . . . . . . . . 110
Monitoring in ZoneAlarm Anti-virus and ZoneAlarm Security Suite . . . . . . . . . . . . 111
Enabling and disabling Anti-virus Monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Viewing Status Messages in the Anti-virus Monitoring panel . . . . . . . . . . . . . . . . 112
Viewing Anti-virus Monitoring alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Chapter 7 E-mail protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Understanding e-mail protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116

Inbound MailSafe protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Outbound MailSafe protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Enabling Inbound MailSafe protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Enabling Outbound MailSafe protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Customizing Inbound MailSafe protection . . . . . . . . . . . . . . . . . . . . . . . . 118

Viewing the Attachments list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Changing the quarantine setting for an attachment type . . . . . . . . . . . . . . . . . . . 118
Adding and removing attachment types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
Opening a quarantined attachment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Customizing Outbound MailSafe protection . . . . . . . . . . . . . . . . . . . . . . . 121

Enabling Outbound MailSafe protection by program . . . . . . . . . . . . . . . . . . . . . 121
User Guide for Zone Labs security software iv

Contents
Setting Outbound MailSafe protection options . . . . . . . . . . . . . . . . . . . . . . . . . 121
Filtering junk e-mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123

Allowing or blocking e-mail from specific senders . . . . . . . . . . . . . . . . . . . . . . . 123
Allowing or blocking e-mail from specific companies . . . . . . . . . . . . . . . . . . . . . 124
Adding contacts to the Allowed List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Scanning your Inbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Allowing e-mail from distribution lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Reporting junk e-mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Reporting fraudulent e-mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Specifying junk e-mail message options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
Challenging e-mail from unknown senders . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Specifying your outbound e-mail server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Customizing junk e-mail filter settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Restoring e-mail incorrectly identified as junk . . . . . . . . . . . . . . . . . . . . . . . . . 131
Viewing junk e-mail filter reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
Anti-virus protection for e-mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133

Enabling E-mail scanning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
How e-mail infections are handled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
Chapter 8 Privacy protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
Understanding privacy protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136

Setting general privacy options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Setting privacy protection levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Applying privacy protection to programs other than browsers . . . . . . . . . . . . . . . . 137
Using Privacy Advisor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139

Setting privacy options for specific Web sites . . . . . . . . . . . . . . . . . . . . . 140
Viewing the privacy site list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
Adding sites to the privacy site list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
Editing sites on the site list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
Customizing cookie control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142

Blocking session cookies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
Blocking persistent cookies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
Blocking third-party cookies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
Setting an expiration date for cookies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
Customizing ad blocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144

Specifying which ads to block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
Setting ad void control options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
Customizing mobile code control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146

Specifying which types of mobile code to block . . . . . . . . . . . . . . . . . . . . . . . . 146
Understanding Cache cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147

Using Cache Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
Customizing hard drive cleaning options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Customizing browser cleaning options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Chapter 9 Alerts and Logs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
Understanding alerts and logs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152

About Zone Labs security software alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
About event logging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
User Guide for Zone Labs security software v

Contents
Setting basic alert and log options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160

Setting the alert event level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
Setting event and program logging options . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
Controlling the number of alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161

Showing or hiding firewall alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
Enabling system tray alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
Game Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162

Setting event and program log options . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
Formatting log appearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
Customizing event logging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
Customizing program logging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
Viewing log entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
Viewing the text log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
Archiving log entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
Using SmartDefense Advisor and Hacker ID . . . . . . . . . . . . . . . . . . . . . . . 170
Chapter 10 Identity protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
Understanding the ID Lock feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172

How your personal information is protected . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
Setting the ID Lock protection level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
About myVAULT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175

Adding data to myVAULT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175
Editing and removing myVAULT contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
Using the Trusted Sites list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178

Viewing the Trusted Sites list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178
Adding to the Trusted Sites list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
Editing and removing trusted sites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
Identity Protection Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
Chapter 11 Parental Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
Understanding Parental Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182

Enabling parental control and smart filtering . . . . . . . . . . . . . . . . . . . . . . 183
Enabling or disabling parental control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
Enabling or disabling Smart Filtering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
Setting timeout options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
Choosing which content categories to block . . . . . . . . . . . . . . . . . . . . . . . 185
Chapter 12 Instant Messaging Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191
IM Security Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192

Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
Blocking spam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
Feature Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194
Inbound protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194
Encrypting instant messaging traffic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
Setting IM Security options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199

Setting the protection level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199
User Guide for Zone Labs security software vi

Contents
Viewing IM Security protection status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199

Customizing protection settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200
Setting advanced IM Security options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200
Viewing logged IM Security events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201
Appendix A Alert reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203
Informational alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204

Firewall alerts/Protected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204
MailSafe alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205
Blocked Program alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
Internet Lock alert. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
Remote alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208
Program alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209

New Program alert. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210
Repeat Program alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
Changed Program alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
Program Component alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212
Server Program alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213
Advanced Program alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215
Automatic VPN Configuration alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215
Manual Action Required alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216
OSFirewall alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218

Medium-rated Suspicious Behavior alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218
High-rated Suspicious Behavior alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218
Malicious behavior alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219
ID Lock alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220

New Network alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221
Instant Messaging alerts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223
Appendix B Keyboard shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225
Navigation shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226

Global function shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227
Dialog box commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229
Button shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230
Appendix C Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233
VPN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234
Configuring Zone Labs security software for VPN traffic . . . . . . . . . . . . . . . . . . . 234
VPN auto-configuration and expert rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234
Automatic VPN detection delay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234
Networking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 236
Making your computer visible on your local network . . . . . . . . . . . . . . . . . . . . . 236
Sharing files and printers across a local network . . . . . . . . . . . . . . . . . . . . . . . . 236
Resolving a slow start up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237
Internet Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 238

Connecting to the Internet fails after installation . . . . . . . . . . . . . . . . . . . . . . . 238
User Guide for Zone Labs security software vii

Contents
Allowing ISP Heartbeat messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239

Connecting through an ICS client . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239
Connecting through a proxy server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240
Unable to connect to program advice server . . . . . . . . . . . . . . . . . . . . . . . . . . . 240
IM Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 241
IM programs not appearing in status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 241
Anti-virus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242
Anti-virus feature installation problem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242
Anti-virus Monitoring alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242
Resolving conflicts with anti-virus products . . . . . . . . . . . . . . . . . . . . . . . . . . . 242
E-mail scanning or IM Security is unavailable . . . . . . . . . . . . . . . . . . . . . . . . . 243
Third-party software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244

Anti-virus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244
Browsers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244
Chat and instant messaging programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245
E-mail programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246
Internet answering machine programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246
File sharing programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246
FTP programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246
Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 247
Remote control programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 248
VNC programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 248
Streaming media programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 249
Voice over IP programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 249
Web conferencing programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 249
Appendix D Program behavior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 251
Medium-rated suspicious behavior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252

High-rated suspicious behavior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 253
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 257
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269
User Guide for Zone Labs security software viii

Tables
Table 2-3: System Tray icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Table 2-4: Update messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Table 3-1: Supported VPN protocols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Table 3-2: Required VPN-related network resources . . . . . . . . . . . . . . . . . . . . 37
Table 4-1: Traffic source list fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Table 4-2: Firewall event log fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Table 4-3: Default access permissions for incoming and outgoing traffic types 50
Table 5-1: Program event log fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Table 5-2: OSFirewall event log fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Table 5-3: Program List symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Table 6-2: Icons indicating scan targets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Table 6-3: Virus event log fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Table 6-4: Spyware event log fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Table 9-6: Log viewer fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
Table 11-1: Parental Control categories . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
Table 12-6: Log Viewer field explanations . . . . . . . . . . . . . . . . . . . . . . . . . . . 202
Table A-1: IM alert messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223
Table B-1: Navigation shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226
Table B-2: Global shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227
Table B-3: Dialog box shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229
Table B-4: Keystrokes for activating buttons . . . . . . . . . . . . . . . . . . . . . . . . . 230
Table C-1: Troubleshooting VPN problems . . . . . . . . . . . . . . . . . . . . . . . . . . 234
Table C-2: Troubleshooting network problems . . . . . . . . . . . . . . . . . . . . . . . . 236
Table C-3: Troubleshooting Internet connection problems . . . . . . . . . . . . . . . 238
Table C-4: Troubleshooting IM Security problems . . . . . . . . . . . . . . . . . . . . . 241
Table C-5: Troubleshooting Zone Labs Anti-virus problems . . . . . . . . . . . . . . 242
User Guide for Zone Labs security software ix

Table D-1: Medium-rated suspicious behavior guide . . . . . . . . . . . . . . . . . . . 252
Table D-2: High-rated suspicious behavior guide . . . . . . . . . . . . . . . . . . . . . . 253
User Guide for Zone Labs security software x

Figures
Figure 2-1: Zone Labs security software Control Center . . . . . . . . . . . . . . . . . 12
Figure 2-2: Zone Labs security software dashboard . . . . . . . . . . . . . . . . . . . . 13
Figure 4-4: Expert firewall rule rank order. . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Figure 4-5: Expert Rules list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Figure 5-3: Programs list. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Figure 5-4: Components List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Figure 6-1: Anti-virus and Anti-spyware status . . . . . . . . . . . . . . . . . . . . . . . 92
Figure 6-2: Scan targets dialog box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Figure 6-3: Virus scan results dialog. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Figure 6-4: Spyware scan results dialog . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Figure 6-5: Anti-virus Monitoring Status area in ZoneAlarm . . . . . . . . . . . . . 112
Figure 7-1: Attachments list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Figure 7-2: The junk e-mail filter toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Figure 7-3: Challenge options tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Figure 7-4: Example of an infection report . . . . . . . . . . . . . . . . . . . . . . . . . 133
Figure 8-1: Privacy Advisor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
Figure 8-2: Privacy site list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
Figure 9-1: Firewall alert. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
Figure 9-2: New Program alert. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
Figure 9-3: New Network alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
Figure 9-4: ID Lock alert. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
Figure 9-5: Medium-rated Suspicious Behavior alert . . . . . . . . . . . . . . . . . . 157
Figure 9-6: High-rated Suspicious Behavior alert . . . . . . . . . . . . . . . . . . . . . 158
Figure 10-1: Transmission of myVAULT contents . . . . . . . . . . . . . . . . . . . . 173
Figure 10-2: Receipt of myVAULT contents . . . . . . . . . . . . . . . . . . . . . . . . 173
Figure 10-3: Trusted Sites list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178
User Guide for Zone Labs security software xi

Figure 12-1: Sending a voice transmission that is blocked . . . . . . . . . . . . . . 194
Figure 12-2: Blocking an incoming voice transmission . . . . . . . . . . . . . . . . . 194
Figure 12-3: Sending an executable URL to a contact . . . . . . . . . . . . . . . . . 195
Figure 12-4: Potentially harmful link removed. . . . . . . . . . . . . . . . . . . . . . . 195
Figure 12-5: Example of an encrypted conversation. . . . . . . . . . . . . . . . . . . 197
Figure 12-6: Example of an unencrypted conversation . . . . . . . . . . . . . . . . . 197
User Guide for Zone Labs security software xii

Preface
! “About Zone Labs security software,” on page xiv
! “About this guide,” on page xv
User Guide for Zone Labs security software xiii

Preface About Zone Labs security software
About Zone Labs security software

Zone Labs security software is a family of security products that offers a wide range of
features and benefits. This release supports the following versions of Zone Labs security
software:
! ZoneAlarm
Offers firewall protection, limited MailSafe protection and Program Control, and Anti-
virus Monitoring.
! ZoneAlarm Anti-virus
Includes the same features available in free ZoneAlarm, plus Anti-virus protection,
Inbound and Outbound MailSafe protection, Program Control with SmartDefense
Advisor, and OSFirewall protection.
! ZoneAlarm Anti-Spyware
Includes the same features available in free ZoneAlarm, plus Anti-spyware protection,
Inbound and Outbound MailSafe Protection, Program Control with SmartDefense
Advisor, and OSFirewall protection.
! ZoneAlarm Pro
Includes expert firewall protection, Inbound and Outbound MailSafe protection,
Program Control with SmartDefense Advisor, Privacy control, Identity Protection, Anti-
spyware protection, and OSFirewall protection.
! ZoneAlarm Security Suite
Includes the features available in ZoneAlarm Pro, plus IM Security, Parental Control,
Identity Protection, Anti-virus protection, Junk E-mail Filtering, and offers protection
for mobile laptop users and wireless home networks.
User Guide for Zone Labs security software xiv

Preface About this guide
About this guide

This guide is intended for users of ZoneAlarm, ZoneAlarm Anti-virus, ZoneAlarm Pro,
ZoneAlarm Anti-Spyware, and ZoneAlarm Security Suite. Throughout this guide, these
products are collectively referred to as Zone Labs security software. In cases where a
reference to a specific product is required, the product name is used.
Conventions
This guide uses the following formatting and graphics conventions.
Convention Description
Bold Used for user interface elements such as panels, tabs, fields, but-
tons, and menu options.
Italic Used for file names and paths.
| Used to separate panel and tab selections in procedures.

Example: Select Overview|Status, then click Add.
Tip icon. Suggests alternative methods for accomplishing tasks or
procedures.
Note icon. Emphasizes related, reinforcing, or important informa-

tion.
Caution icon. Indicates actions or processes that can potentially

damage data or programs.
Zone Labs User Forum

Connect with other users of Zone Labs security software. Ask questions, get answers,
and see how fellow users get the most out of their Zone Labs security software. Visit:
http://www.zonelabs.com/store/content/support/userForum/
userForum_agreement.jsp
User Guide for Zone Labs security software xv

Preface Zone Labs User Forum
User Guide for Zone Labs security software xvi

Chapter
Installation and setup
1
This chapter provides system requirements and instruc-
tions for installing, upgrading, configuring, and uninstall-
ing Zone Labs security software.
Topics:
! “System requirements and supported software” on page 2

! “Installing Zone Labs security software” on page 4
! “Upgrading from a previous version” on page 6
! “Configuring basic options” on page 7
! “Uninstalling Zone Labs security software” on page 9
1
Chapter 1: Installation and setup System requirements and supported software
System requirements and supported

software
This section lists hardware and software needed to run Zone Labs security software.
Hardware requirements and supported operating systems

The computer on which you install Zone Labs security software must have:
! One of the following operating systems and minimum RAM required:
# Microsoft® Windows® XP, Home or Professional Edition, 128MB of RAM

# Microsoft Windows 2000 Professional, 64MB of RAM
! 50MB of available hard-disk space
! Pentium® III 800Mhz or higher
The ideal resolution for Zone Labs security software is 1024 x 768 or higher.
Some software screens might not display properly at resolutions of 800 x 600 or
lower.
Supported protocols for e-mail protection

! HTTP (Junk e-mail filtering in conjunction with Outlook or Outlook Express)
! IMAP4 (Incoming only) - IMAP4 is not supported for virus scanning of e-mail.
! POP3 (Incoming only)
! SMTP (Outgoing only)
Supported browser software

! Internet Explorer 5.5, 6.0 SP1, 6.0 SP2
! Netscape Navigator 7.2, 8.1
! FireFox 1.00, 1.5
! Mozilla 1.4 and up
! MSN Explorer 6.0, 7.02
! AOL 9.0
User Guide for Zone Labs security software 2

Chapter 1: Installation and setup Supported IM clients
Supported IM clients
! MSN 7.5.0299, 7.5.0324
! Windows Messenger 4.7.3001, 5.0.468, 5.1.0701
! Yahoo! IM 5.6.0.1351, 6.0.0.1643 - 6.0.0.1922, 7.0.0.xxx
! Yahoo! Japan IM 6.0.0.1703
Japan Yahoo IM does not support non-Japanese Yahoo's ID. Also, Japan IM uses
a different process: YPagerJ.exe
! AOL Instant Messenger 5.9.x

! AOL9
! Triton (AIM) 1.0.4.1
! ICQ Pro 2003b (build 3916)
! ICQ Lite 5.04 build 2321, 5.1 build 3916
! Trillian Free (MSN/YIM/AIM/ICQ) 0.74i, 2.0.12 - 3.1
! Trillian Pro (MSN/YIM/AIM/ICQ) 2.0.12 - 3.1
! GAIM (MSN/YIM/AIM/ICQ) 1.0.0 - 1.5.0, 2.0.0 beta 3
! Miranda (MSN/YIM/ICQ) v.0.4rc1, 0.4.0.3

Chapter 1: Installation and setup Installing Zone Labs security software
Installing Zone Labs security software

The installation and setup process for Zone Labs security software involves installing
the software files, running the configuration wizard to set basic protection options, and
viewing the Tutorial.
If you have a previous version of Zone Labs security software installed, you may
receive a security warning during installation. Click OK to dismiss these warnings
before proceeding with installation.
Installing ZoneAlarm
Before you can begin the installation process, you must download ZoneAlarm from the
Zone Labs Web site, then browse to the location on your computer where you saved the
installation file.
1. Double-click the installation file you downloaded.
The installation program begins.
2. Either specify a location for the installation files, or click Next to continue.
The default location is C:Program FilesZone LabsZoneAlarm.
3. Type your name, company (optional), and e-mail address, then click Next.
4. Read and accept the license agreement, then click Install.
The installation program runs.
5. Click Finish to close the installation program.

6. Click Yes to start ZoneAlarm.
The License Wizard appears.
7. Select either the ZoneAlarm Pro trial or free ZoneAlarm, then click Next
When installing ZoneAlarm, you have the option to install a trial version of ZoneAlarm
Pro, free for 15 days. During the trial period you will experience the advanced security
protection available in ZoneAlarm Pro. At the end of the trial period, you can continue
to use these advanced features by purchasing ZoneAlarm Pro, or you can revert to
ZoneAlarm. When reverting to ZoneAlarm after the ZoneAlarm Pro trial, any custom
settings you have created in ZoneAlarm Pro will be discarded.
Installing Zone Labs security software

Before you can begin the installation process, you will need to insert the Zone Labs
security software CD into your CD-ROM drive, or if you downloaded the software from

Chapter 1: Installation and setup Installing Zone Labs security software
the Zone Labs Web site, browse to the location on your computer where you saved the
installation file.
To install Zone Labs security software:

1. Double-click the installation file.
2. Either specify a location for the installation files, or click Next to continue.
The default location is C:Program FilesZone LabsZoneAlarm.
3. Type your name, company (optional), and e-mail address, then click Next.
4. Read and accept the license agreement, then click Install.
5. Click Finish to close the installation program.
If you are upgrading from a previous version, you may be prompted to restart your
computer to complete the installation process.
6. Click OK to restart your computer, or click Cancel.
If you click Cancel, remember to restart your computer later to complete the
installation process.

Chapter 1: Installation and setup Upgrading from a previous version
Upgrading from a previous version

Zone Labs security software is designed for easy upgrade from version to version. In
most cases, you do not need to uninstall your existing version before upgrading to
version 6.5. However, if you are using any version of Integrity Client (for enterprise use
only), you should first uninstall that product before upgrading.
Upgrading and the Windows XP SP2 Windows Firewall

If you are running Windows XP SP2 and upgrading to version 6.5, after upgrading you
may need to manually turn the Windows XP SP2 Windows Firewall back on. In the
Windows XP Help system, search for firewall to learn how to turn on the
Windows XP Windows Firewall.
Upgrading and IMsecure myVault settings

If you are running the standalone version of IMsecure or IMsecure Pro and upgrading
to ZoneAlarm Security Suite, the upgrade program has been designed for security
reasons to not transfer Social Security, credit card, and Access PIN numbers.
Upgrading and MailFrontier settings

If you are running the standalone version of MailFrontier and upgrading to ZoneAlarm
Security Suite, the upgrade process transfers your Address Book but other MailFrontier
settings may be lost.
To upgrade from a previous version:

1. Double-click the installation file.
2. Select an upgrade option, then click Next to continue.
Upgrade This option preserves your existing security settings and applies them
to the new version. New features that are added during upgrade
receive default settings.
Clean Install This option discards your existing security settings and restores default
settings.

Installation and setup Configuring basic options
Configuring basic options

After completing installation, you will see the Configuration Wizard. The Configuration
Wizard appears only after installation and assists you in setting the basic Zone Labs
security software options. You can use the Configuration Wizard to enable privacy
protection, set new network detection behavior, specify alert settings, enable Anti-virus
protection, and configure program permissions.
Configuring program access permissions

Zone Labs security software can configure many of the most popular programs in the
following software categories:
! Instant Messaging programs
! Web browsers
! Microsoft Office
! E-mail
! Anti-virus
! Microsoft Windows processes
! Document utilities
! Zone Labs software applications
For more information about assigning permission to programs, see “Setting
permissions for specific programs” on page 76.
Joining the DefenseNet community

Zone Labs security software users can help shape the future of Zone Labs security
products by joining the DefenseNet community protection network and periodically
sending anonymous configuration data to Zone Labs for analysis. By joining
DefenseNet, you can help us focus our attention on the features and services that you
use most often and to introduce new functionality that will provide even smarter
security.
Configuration data is not collected from ZoneAlarm or ZoneAlarm Anti-virus users.
Even with the “Alert me before I make contact” preference selected in the
Overview|Preferences tab, you will not be alerted before sending configuration
data to Zone Labs.
The data collected is completely anonymous and is for Zone Labs internal use only and
will not be shared with others. Of the millions of Zone Labs security software users,
only a small percentage of users will have their information collected. The frequency of

Installation and setup Joining the DefenseNet community
data transmission depends upon the configuration of your computer. For most users,
data will be sent once per day.
To send configuration data to Zone Labs, select Yes, automatically and anonymously
share my settings in the Configuration Wizard.
If you later decide that you do not want to send anonymous data, select
Overview|Preferences, in the Contact with Zone Labs area, then clear the Share
my settings anonymously... check box.

Installation and setup Uninstalling Zone Labs security software
Uninstalling Zone Labs security

software
If you need to uninstall Zone Labs security software, run the uninstall program included
with your installation rather than using the Windows Add/Remove Programs utility.
This ensures that all traces of Zone Labs security software are removed from your
computer
You must be logged in as a user with administrator privileges in order to uninstall Zone
Labs security software.
If you are upgrading, there is no need to uninstall your existing version. For more
information, see “Installing Zone Labs security software” on page 4.
To uninstall Zone Labs security software:

1. Select Start|Programs.
2. Select Zone Labs|Uninstall.
The Uninstallation program begins.

Installation and setup Uninstalling Zone Labs security software

Chapter
Zone Labs security software basics
2
This chapter provides an introduction to the main tools and
concepts of Zone Labs security software.
Topics:
! “Tour of the Zone Labs security software Control Center,” on page 12

! “Understanding Zones,” on page 18
! “Responding to alerts,” on page 20
! “Setting product preferences,” on page 22
! “Licensing, registration, and support,” on page 27
11
Chapter 2: Zone Labs security software basics Tour of the Zone Labs security software Control Center
Tour of the Zone Labs security software

Control Center
The Zone Labs security software Control Center provides one-stop access to the
security features that keep your computer safe. Zone Labs security software’s major
features are presented in a menu on the left side of the Control Center.
Getting around the Control Center

To move from feature to feature, first select the feature you want from the menu, then
select the tab you want to view.
Menu bar Dashboard

Tab selectors
Help
Click to show or hide help text Click to resize
Figure 2-1: Zone Labs security software Control Center
Menu bar
The menu bar provides access to the available panels. The tools in each panel are
arranged in two or more tabs.

Chapter 2: Zone Labs security software basics Using the dashboard
Tab selectors
Click a tab selector to bring the tab you want to see to the top.
With the exception of the Overview panel, each panel in the Control Center has a Main
tab and one or two other tabs. The Main tab contains the global controls for that panel.
Show /Hide Text
Click this link to show or hide instructional text for the selected tab. The text gives a
brief explanation of the tab and its controls.
Help button
To get help with the controls on any panel, click the Help link in the upper-right corner.
Zone Labs security software’s online help system goes immediately to the help topic for
the selected tab.
Using the dashboard

The dashboard provides constant access to basic security indicators and functions. The
dashboard appears at the top of every panel.
Stop button Internet Lock
Inbound/Outbound Networks indicator

traffic indicator System area
Figure 2-2: Zone Labs security software dashboard
Inbound/Outbound traffic indicator

The traffic indicator shows you when traffic leaves (red) or enters (green) your
computer. This does not imply that the traffic is illegal or that any security problem has
occurred.
Some applications access network resources in the background, so you may see
network traffic occurring even when you aren’t actively accessing the Internet.
Stop button
Click the Stop button to immediately block all network activity including Internet
access. Clicking the Stop button on the dashboard instantly closes your computer to
incoming and outgoing Internet traffic. Therefore, you should click the Stop button
only if you believe your computer is under attack, otherwise, Zone Labs security
software may block legitimate programs that require access, as well as DHCP (Dynamic
Host Configuration Protocol) messages or ISP heartbeat messages used to maintain your
Internet connection. To re-open access, click the Stop button again.

Chapter 2: Zone Labs security software basics Using the dashboard
Internet Lock
The Internet Lock stops all traffic except traffic initiated by programs to which you have
given pass-lock permission. Clicking the Internet Lock instantly blocks DHCP messages
or ISP heartbeats used to maintain your Internet connection. As a result, you may lose
your Internet connection. To reopen access, click the Lock button again.
You also can activate the Stop button and Internet Lock by right-clicking on the
system tray icon and choosing either Stop all Internet activity or Engage Internet
Lock from the shortcut menu.
Networks indicator
The networks indicator shows you when you have wired or wireless networks in either
the Trusted Zone or Internet Zone.
Click the network symbol to go immediately to the Zones tab, where the settings for the
network are stored.
Active Programs area
The active programs area displays the icons of programs that are currently open and
that have accessed the Internet in your current session. To see information about a
program displayed here, hover your mouse pointer over the icon.
The icon blinks when the program is sending or receiving data.
A hand symbol under the icon indicates that the program is active as server and is
listening for connection requests.
System area
This area can display two messages.
! All Systems Active
Indicates that Zone Labs security software is functioning normally.
! Error Please Reboot
Indicates that you are not protected by Zone Labs security software because the
underlying security process is not running. Restart your computer to allow Zone Labs
security software to reset.

Chapter 2: Zone Labs security software basics System Tray icons
System Tray icons

The icons displayed in the system tray let you monitor your security status and Internet
activity as frequently as you wish, and access your security settings in just a few clicks.
Icon Description
Zone Labs security software is installed and running.
Your computer is sending (red band) or receiving (green band) network

traffic. This does not imply that you have a security problem, or that the
network traffic is dangerous.
Zone Labs security software is running a spyware and/or virus scan. For
details about scans, see “Performing a spyware scan,” on page 104, or
“Performing a virus scan,” on page 99.
Game Mode is activated, causing Zone Labs security software to suppress
updates, scans, and most alerts. For details about this feature, see “Game
Mode,” on page 162.
Zone Labs security software is receiving an update, such as an update of
new spyware definitions or virus definitions.
Zone Labs security software has blocked a communication, but your set-
tings prevent a full-sized alert from being shown.
(Yellow lock) The Internet Lock is engaged.
(Red lock) The Stop button is engaged. You may also begin to see a lot of
alerts.
Table 2-3: System Tray icons
Shortcut menu
Right-click any of the system tray icons to access a shortcut menu.
Engage Internet Lock
This menu option engages the Internet Lock and displays the yellow lock icon in the
system tray. All Internet traffic initiated by programs without pass-lock permission is
blocked. Provides the same function as clicking on the Internet Lock in the dashboard.
Stop All Internet Traffic
This menu option engages the Stop button and displays the red lock icon in the system
tray. All Internet traffic is blocked. Provides the same function as clicking on the Stop
button in the dashboard.
Game Mode / Stop Game Mode
The Game Mode option brings up the dialog that controls Game Mode. When
activated, Game Mode causes Zone Labs security software to suppress updates, scans,
and most alerts. Depending on your settings, Zone Labs security software will either
deny or allow most program and network permission requests while Game Mode is
active. You can use the Stop Game Mode option, which appears only while Game Mode

Chapter 2: Zone Labs security software basics Using the Status tab
is active, to turn Game Mode off. For details about this feature, see “Game Mode,” on
page 162.
Help
Displays help files.
View Scan
Displays the Scanning Status dialog box, which tracks the progress of spyware and virus
scans. This menu option is available only during such scans.
About
Displays version information for the Zone Labs security software you have installed,
including driver and engine information. If you are experiencing problems with your
software you can copy this information to the clipboard and paste it into an e-mail to
support.
Restore ...Control Center
Restores the Zone Labs security software Control Center to its full size. The label for
this menu option reflects the version of Zone Labs security software you have installed
(for example Zone Labs Anti-virus or ZoneAlarm Security Suite).
Shutdown...
Closes the Zone Labs security software application. The label for this menu option
reflects the version of the Zone Labs security software you have installed (for example,
Zone Labs Anti-virus or ZoneAlarm Security Suite).
Using the Status tab

The protection area of the Status tab tells you whether your security settings are enabled
and provides a summary of security activity. From the Status tab you can:
! See at a glance if your computer is secure
! See a summary of Zone Labs security software’s activity
! See if your version of Zone Labs security software is up to date
! Access the product tutorial
To reset the alert counts in this area, click Reset to Default at the bottom of the panel.
Blocked intrusions
Shows you how many times the Zone Labs security software firewall and MailSafe have
acted to protect you, and how many were high-rated alerts.
Inbound Protection
Indicates whether your firewall is on and displays the number of Firewall alerts, MailSafe
alerts, and Internet Lock alerts that have occurred since the last reset. If a warning is
displayed, click the underlined warning text to go immediately to the panel where you
can adjust your settings.

Chapter 2: Zone Labs security software basics Using the Status tab
Outbound Protection
Indicates whether program control is configured safely and displays the number of
program alerts that have occurred since the last reset. Zone Labs security software will
warn you if program control is disabled.
Anti-virus Protection
Indicates whether your computer is protected against viruses and displays the number
of viruses that have been treated to date. The Anti-virus Protection status only appears
in ZoneAlarm Anti-virus and ZoneAlarm Security Suite. If you are using ZoneAlarm or
ZoneAlarm Pro, you will see Anti-virus Monitoring status instead.
E-mail Protection area
Indicates whether MailSafe is enabled and displays the number of attachments that have
been quarantined since the last reset. If a warning is displayed, click the underlined
warning text to go immediately to the panel where you can adjust your settings.
Anti-virus / Anti-spyware
Indicates whether virus and spyware protection is enabled and displays the number of
viruses and spies that have been treated.
IM Security Protection
Indicates whether Instant Messaging protection is enabled and displays the number of
messages that have been scanned.
Update and tutorial information
When you purchase Zone Labs security software, you receive an automatic update
subscription valid for one year.
The update box helps you make sure you’re running the latest version of Zone Labs
security software, and gives you quick access to product updates when they arrive.
Message Meaning
“Check for update.” Click the link to see if there are any impor-
tant updates to Zone Labs security software
available for download.
“An update is available.” Your automatic update subscription indi-
cates that an update to Zone Labs security
software is available. Click the link to go to
the Zone Labs Web site to download the
update.
“Firewall is up to date” You have the most up-to-date version of
Zone Labs security software.
“Update subscription expired. Click to Your automatic update subscription has
Renew.” expired. Click the link to go to the Zone Labs
Web site to renew your subscription.
Table 2-4: Update messages
Click Tutorial to learn the basics of how Zone Labs security software works.

Chapter 2: Zone Labs security software basics Understanding Zones
Understanding Zones
Zone Labs security software keeps track of the good, the bad, and the unknown out on
the Internet by using virtual containers, called Zones, to classify the computers and
networks that connect to your computer.
The Internet Zone is the “unknown.” All the computers and networks in the world
belong to this Zone—until you move them to one of the other Zones.
The Trusted Zone is the “good.” It contains all the computers and networks you trust and
want to share resources with—for example, the other machines on your local or home
network.
The Blocked Zone is the “bad.” It contains computers and networks you distrust.
When another computer wants to communicate with your computer, Zone Labs
security software looks at the Zone it is in to help decide what to do.
To learn how to put a computer, network, or program in the Trusted Zone, see
“Managing traffic sources,” on page 46.
Zones manage firewall security

Zone Labs security software uses security levels to determine whether to allow or block
inbound traffic from each Zone. Use the Firewall panel, Main tab to view and adjust
security levels.
High security setting
High security places your computer in stealth mode, making it invisible to hackers. High
security is the default configuration Internet Zone.
In High security, file and printer sharing is disabled; but outgoing DNS, outgoing
DHCP, and broadcast/multicast are allowed, so that you are able to browse the Internet.
All other ports on your computer are closed except when used by a program that has
access permission and/or server permission.
Medium security setting
Medium security places your computer in component learning mode, where Zone Labs
security software quickly learn the MD5 signatures of many frequently used program
components without interrupting your work with multiple alerts. Medium security is the
default setting for the Trusted Zone.
In Medium security, file and printer sharing is enabled, and all ports and protocols are
allowed. (If Medium security is applied to the Internet Zone, however, incoming
NetBIOS traffic is blocked. This protects your computer from possible attacks aimed at
your Windows networking services.) At Medium security, you are no longer in stealth
mode.
We recommend that you use the Medium security setting for the first few days of
normal Internet use after installing Zone Labs security software. After a few days of
normal use, Zone Labs security software will have learned the signatures of the majority

Chapter 2: Zone Labs security software basics Zones provide program control
of the components needed by your Internet-accessing programs, and will remind you to
raise the Program Authentication level to High.
No security level is necessary for the Blocked Zone, because no traffic to or from that
Zone is allowed.
Advanced users can customize high and medium security for each Zone by
blocking or opening specific ports. For more information, see “Blocking and
unblocking ports,” on page 50.
Zones provide program control

Whenever a program requests access permission or server permission, it is trying to
communicate with a computer or network in a specific Zone. For each program you can
grant or deny the following permissions:
! Access permission for the Trusted Zone.
! Access permission for the Internet Zone.
! Server permission for the Trusted Zone.
! Server permission for the Internet Zone.
By granting access or server permission for the Trusted Zone, you enable a program to
communicate only with the computers and networks you have put in that Zone. This is
a highly secure strategy. Even if a program is tampered with, or given permission
accidentally, it can only communicate with a limited number of networks or computers.
By granting access or server permission for the Internet Zone, however, you enable a
program to communicate with any computer or network, anywhere.
Advanced users can specify the ports and protocols a particular program can
use, the hosts it can access, and other details. For more information, see
“Creating an expert rule for a Program,” on page 87.

Chapter 2: Zone Labs security software basics Responding to alerts
Responding to alerts
When you first start using Zone Labs security software, it is not unusual to see a number
of alerts. Don’t worry! This doesn’t mean you’re under attack. It just means that Zone
Labs security software is learning your program and network configurations, and giving
you the opportunity to set up your security the way you want it.
How you respond to an alert depends upon the type of alert displayed. For information
on responding to a particular type of alert, see Appendix A,“Alert reference,” starting on
page 203.
New Program alerts

The majority of the initial alerts you see will be New Program alerts. These alerts occur
when a program on your computer requests access or server permission to the Internet
or your local network. Use the New Program alert to give access permission to
programs that need it—like your browser and e-mail program.
Use the check box labeled Remember this answer to give permanent permission
to programs you trust.
Few programs or processes actually require server permission in order to function

properly. Some processes, however, are used by Microsoft Windows to carry out
legitimate functions. Some of the more common ones you may see in alerts are:
! lsass.exe
! spoolsv.exe
! svchost.exe
! services.exe
! winlogon.exe
If you do not recognize the program or process that is asking for server permission,
search the Microsoft Support Web site (http://support.microsoft.com/) for
information on the process to determine what it is and what it’s used for. Be aware that
many legitimate Windows processes, including those listed above, have the potential to
be used by hackers to disguise worms and viruses, or to provide backdoor access to your
system for Trojan horses. If you were not performing a function (such as browsing files,
logging onto a network, or downloading files) when the alert appeared, then the safest
approach is to deny server permission. At any time, you can assign permissions to
specific programs and services from the Programs List, accessed by selecting Program
Control|Programs tab.
To learn more about New Program alerts and how to respond to them, see “New
Program alert,” on page 210.

Chapter 2: Zone Labs security software basics New Network and VPN alerts
New Network and VPN alerts

The other initial alerts you may see are the New Network alert and VPN Configuration
alerts. These occur when Zone Labs security software detects a network connection or
VPN connection. They help you configure your Trusted Zone, port/protocol
permission, and program permissions correctly so that you can work securely over your
network. For details about these alerts and how to respond to them, see Appendix
A,“Alert reference,” starting on page 203.

Chapter 2: Zone Labs security software basics Setting product preferences
Setting product preferences

Use the Preferences tab to set or change your Zone Labs security software password,
log in or log out, manage updates, set general options for the display of the Zone Labs
security software Control Center, and configure privacy settings for communications
with Zone Labs.
Setting update options

When you purchase Zone Labs security software you receive a year of free updates. You
can check for updates manually, or set Zone Labs security software to check
automatically.
To set check for update settings:

1. Select Overview|Preferences.
2. In the Check for Updates area, choose an update option.
Automatically Zone Labs security software automatically notifies you when an update
is available.
Manually You monitor the Status tab for updates. To invoke an update check
immediately, click Check for Update.
Setting your password

By setting a password, you prevent anyone but you from shutting down or uninstalling
Zone Labs security software, or changing your security settings. Setting a password will
not prevent other people from accessing the Internet from your computer.
The ability to create a password is not available in ZoneAlarm.
If your version of Zone Labs security software was installed by an administrator with an
installation password, that administrator can access all functions.
When you set a password for the first time, be sure to log out before leaving your
computer. Otherwise, others can still change your settings.
To set or change a Zone Labs security software password:

2. Click Set Password.
3. Type your password and password verification in the fields provided.
4. Select Allow others to use programs without a password (unless the program
permission is set to “Block”) to allow others to use programs you haven’t
explicitly blocked, even if they don’t have a password.

Chapter 2: Zone Labs security software basics Backing up and restoring security settings
5. Click OK.
Valid passwords are between 6 and 31 characters long. Valid characters include
A-Z, a-z, 0-9, and characters !,@,#,$,%,^,&,*.
Once you have set a password, you must log in before you can change settings, shut
down the TrueVector security engine, or uninstall Zone Labs security software.
Backing up and restoring security settings

You can back up your existing security settings to an XML file so that you can restore
them later, should you need to.
The backup and restore feature should not be used to share settings among
different computers or to distribute security policies. To do so could cause an
extremely high number of alerts to appear due to differences among computers,
applications, and Windows processes.
The ability to back up and restore settings is only available in ZoneAlarm Pro and
ZoneAlarm Security Suite.
To back up security settings

2. In the Backup and Restore Security Settings area, click Backup.
3. Type a file name or select an existing file to overwrite.
4. Click Save.
To back up or restore security settings

2. In the Backup and Restore Security Settings area, click Restore.
3. Select the XML file which contains the settings you want to use.
4. Click Open.
Setting general product preferences

By default, Zone Labs security software starts automatically when you turn on your
computer. Use the settings in the General area to change this and other options.

Chapter 2: Zone Labs security software basics Setting contact preferences
To set general display preferences:

2. In the General area, specify your preferences.
Load Zone Labs security software Zone Labs security software starts automatically
at startup when you turn on your computer.
Protect the Zone Labs security Prevents Trojan horses from sending Keyboard and
software client Mouse requests to Zone Labs security software.
Note: To ensure maximum security, only disable this
feature if you are having problems with your key-
board or mouse while using remote access programs.
3. In the General area, click Options.

The Options dialog box appears.
4. In the Display settings area, choose your display preferences.
Remember the last tab visited Opens Zone Labs security software to the tab that you
had open the last time you closed the Control Center.
Color-scheme Allows you to change the default color scheme of the
Control Center. Additional color choices are not avail-
able in ZoneAlarm.
5. In the Proxy Configuration area, enter the IP address of your proxy server
information only if you are certain that it is necessary to do so.
Zone Labs security software automatically detects most proxy configurations,

such as those configured through Internet Explorer. making it unnecessary to
enter that information here. You should enter proxy information only if you have
an uncommon proxy configuration, such as a scripted proxy, and if some product
features such as anti-virus updates or instant messaging aren't working.
Setting contact preferences

Setting contact preferences ensures that your privacy is protected when Zone Labs
security software communicates with Zone Labs (for example, to check automatically
for updates).
To set contact preferences:


Chapter 2: Zone Labs security software basics Setting product display and proxy server options
2. In the Contact with Zone Labs area, specify your preferences.

Alert me with a pop-up Displays a warning before contacting Zone Labs to deliver
before I make contact registration information, get product updates, research an
alert, or access DNS to look up IP addresses.
Note: There are certain situations in which you will not be
notified before contact is made. Those include sending
DefeneseNet data to Zone Labs, contacting Zone Labs for
program advice, when an anti-virus update is performed, or
when monitoring your anti-virus status. The “Share setting
anonymously...” setting below, turns off the DefenseNet
transfer. All other settings can be disabled from the main tab
of their respective panels.
Hide my IP address when Prevents your computer from being identified when you con-
applicable tact Zone Labs, LLC.
Hide the last octet of my Omits the last section of your IP address (for example,
IP address when applica- 123.456.789.XXX) when you contact Zone Labs, LLC.
ble
Share my security set- Periodically sends anonymous configuration data to Zone
tings anonymously with Labs. For more information, see “Joining the DefenseNet
Zone Labs community,” on page 7.
Note: Configuration data is not collected from ZoneAlarm or
ZoneAlarm Anti-virus users.
Setting product display and proxy server options

You can use the Options dialog box to specify display setting options and proxy server
information.
To set product display and proxy options:

2. In the General area, click Options.
The Options dialog box appears.
3. In the Display settings area, specify your preferences.
Remember the last tabs Opens Zone Labs security software to the most
visited in the panels recently viewed panel and tab the next time you open
the Control Center.
Color-scheme Allows you to change the default color scheme of the
Control Center. Additional color choices are not avail-
able in ZoneAlarm.
4. Enter proxy server information, where necessary.

Zone Labs Security Software automatically detects most proxy configurations, such as
those configured through Internet Explorer, making it unnecessary to enter that
information here. You only need to enter your proxy information if you have an

Chapter 2: Zone Labs security software basics Creating an online fraud protection profile
uncommon proxy configuration, such as a scripted proxy, and if you find that some
product features such as anti-virus updates aren't working.
Creating an online fraud protection profile

If you are an eBay user, you can protect yourself against online fraud by storing your
online credentials in Zone Labs security software. Zone Labs security software protects
your profile by making sure it is only sent to authorized eBay destinations.
To create your online protection profile in ZoneAlarm and ZoneAlarm Anti-virus:

2. In the eBay Protection Profile area, click Password.
The Alliance Partner Password dialog displays.
3. Select eBay from the Alliance Partner drop-down list.
4. Type your eBay password into the password and confirm fields, then click OK.
To enter your eBay password in ZoneAlarm Pro or ZoneAlarm Security Suite:

1. Select ID Lock|myVAULT, then click Add.
The Add information to myVAULT dialog appears.
2. Type a description of the item, then select eBay password from the category drop-
down list.
3. Type your eBay password into the password and confirm fields, then click OK.
Asterisks will appear in place of the data you entered and an encrypted form of your
eBay password will be stored in myVAULT. The original information is not stored on
your computer.
4. Specify whether you want the information to be protected when using Web and E-
mail.
5. Click OK to save your changes.
For more information about how Zone Labs security software keeps passwords and
other personal data safe, see Chapter 10,“Identity protection,” starting on page 171.

Chapter 2: Zone Labs security software basics Licensing, registration, and support
Licensing, registration, and support

In order to receive support and updates for Zone Labs security software, you must have
a valid license.
Updating your product license

If you have been using a trial or beta license key and have purchased a full license, or if
your trial or beta is about to expire, you can purchase a full license from Zone Labs.
To purchase a license:
1. Select Overview|Product Info.
2. In the Licensing Information area, click Buy Now!
You will be directed to the Zone Labs Web site, where you can complete your
product purchase.
To change your license key:

2. In the Licensing Information area, click Change Lic.
The License Information dialog appears.
3. In the space provided, either type or paste your license key.
4. Click Apply, then click OK.
Registering Zone Labs security software

Register Zone Labs security software to receive security news from Zone Labs.
To register Zone Labs security software:

2. In the Registration area, click Change Reg.
The Registration Information dialog appears.
3. Type your name, organization, and e-mail address in the fields provided.
The e-mail address you enter here is used to configure your Outbound MailSafe
protection. Be sure to enter your e-mail address correctly. For more information,
see “Setting Outbound MailSafe protection options,” on page 121.
4. To be notified of product news and updates, select the check box labeled Inform me
of important updates and news.
5. Click OK.

Chapter 2: Zone Labs security software basics Accessing technical support
To change your registration information:

Select Overview|Prod Info, then click Change Reg.
Accessing technical support

If you are eligible to receive technical support, you can access support resources, such as
FAQs and known issues, directly from Zone Labs security software.
To access support resources:

1. Select Overview|Prod Info.
2. In the Support and Update Information area, click the click here link.
The Zone Labs Support Center Web site appears.
3. Click the Support & Services link, then select the product for which you need
support.

Chapter
Networking with Zone Labs security
software
3
If you’re on a home network, business Local Area Network
(LAN), or Virtual Private Network (VPN), or a wireless net-
work, you want to ensure smooth communication with the
network while still maintaining high security. The Network
Configuration Wizard, automatic VPN configuration, and
other features of Zone Labs security software help you to
quickly set up your network environment.
Topics:
! “Configuring a new network connection,” on page 30

! “Integrating with network services,” on page 33
! “Configuring your VPN connection,” on page 35
29
Chapter 3: Networking with Zone Labs security software Configuring a new network connection
Configuring a new network connection

If your computer connects to a network, you have to decide whether to place that
network in the Trusted Zone or in the Internet Zone.
Placing a network in the Trusted Zone enables you to share files, printers, and other
resources with other computers on that network. Networks you know and trust, such as
your home or business LAN and known protected wireless networks, should go in the
Trusted Zone.
Placing a network in the Internet Zone prevents you from sharing resources with other
computers on that network and protects you from the security risks associated with
resource sharing. Unknown networks and most wireless networks, even secured wireless
networks, should go in the Internet Zone.
The Network Configuration Wizard helps you make this decision by determining
whether the detected LAN network is public or private. The Wireless Network
Configuration Wizard helps you make this decision by determining whether the
detected wireless network is secured or unsecured.
$ Disabling the Wireless Network Configuration Wizard
Using the Network Configuration Wizard

When your computer connects to a new network, Zone Labs security software opens
the Network Configuration Wizard, displaying the IP address of the detected network.
The IP address of the network is used to determine whether it is a private network or a
public network.
A private network is usually a home or business Local Area Network (LAN). Private
networks are placed in the Trusted Zone by default.
A public network is usually a much larger network, such as that associated with an ISP.
Public networks are placed in the Internet Zone by default.
To configure your network connection using the Network Configuration Wizard:

1. Choose the Zone you want this network in, then click Next.
2. Name the network. The name you enter here will be displayed in the Zones tab of
the Firewall panel.
If you prefer not to use the Network Configuration Wizard, click Cancel in the
Wizard screen. A New Network alert will appear. The detected network will be
placed in the Internet Zone, even if it is a private network. For information on
using the New Network alert, see “New Network alert,” on page 221.

Chapter 3: Networking with Zone Labs security software Disabling the Network Configuration Wizard
Disabling the Network Configuration Wizard

The Network Configuration Wizard is enabled by default. If you prefer to use the New
Network Alert to configure new networks, you can disable the Network Configuration
Wizard.
To disable the Network Configuration Wizard:

In screen four of the Wizard, select the check box labeled Do not show
this Wizard the next time a new network is detected, then click Finish.
Using the Wireless Network Configuration Wizard

When your computer connects to a new wireless network, Zone Labs security software
opens the Wireless Network Configuration Wizard, then displays the IP address of the
detected network.
The WEP (Wireless Encryption Protocol) setting on the wireless access point is used to
determine whether it is a secured wireless network or an unsecured wireless network.
A secured wireless network is WEP enabled. WEP provides an initial barrier that can be
easily penetrated by hackers. In order to truly secure the network, the wireless access
point must have other features implemented, such as a limited access list or SSID
(Service Set Identifier) broadcast disabled. Only place wireless networks that you know
have a higher level of security and where you need to share resources or print in the
Trusted Zone.
An unsecured wireless network may be completely unprotected and accessible by
anyone. Unsecured networks are placed in the Internet Zone by default.
To configure a wireless connection:

1. Choose the Zone you want this network in, then click Next.
2. Name the network.
The name you enter in the Configuration Wizard displays in the Zones tab of the
Firewall panel.
If you prefer not to use the Network Configuration Wizard, click Cancel in any
Wizard screen. A New Network alert will appear. The detected network will be
placed in the Internet Zone, even if it is a secured wireless network. For
information on using the New Network alert, see “New Network alert,” on
page 221.
Disabling the Wireless Network Configuration Wizard

The Network Configuration Wizard is enabled by default. If you prefer to use the New
Network Alert to configure new networks, you can disable the Network Configuration
Wizard.

Chapter 3: Networking with Zone Labs security software Disabling the Wireless Network Configuration Wiz-
To disable the Wireless Network Configuration Wizard:

In screen four of the Wizard, select the check box labeled Do not show
this Wizard the next time a new network is detected, then click Finish.

Chapter 3: Networking with Zone Labs security software Integrating with network services
Integrating with network services

If you’re working on a home or business network, you may want to share files, network
printers, or other resources with other people on the network, or send and receive e-
mail through your network’s mail servers. Use the instructions in this section to enable
safe resource sharing.
Enabling file and printer sharing

To share printers and files with other computers on your network, you will need to
configure Zone Labs security software to allow access to the computers with which you
plan to share resources.
To configure Zone Labs security software for file and printer sharing:
1. Add the network subnet (or, in a small network, the IP address of each computer
you’re sharing with) to your Trusted Zone.
See “Adding to the Trusted Zone,” on page 47.
2. Set the Trusted Zone security level to Medium. This allows trusted computers to
access your shared files.
See “Setting the security level for a Zone,” on page 41.
3. Set Internet Zone security to High. This makes your computer invisible to non-
trusted machines.
See “Setting the security level for a Zone,” on page 41.
Connecting to network mail servers

Zone Labs security software is configured to automatically work with Internet-based
mail servers using POP3 and IMAP4 protocols, when you give your e-mail client
permission to access the Internet.
Some mail servers, like Microsoft Exchange, include collaboration and synchronization
features that might require you to trust the server in order for those services to work.
To configure Zone Labs security software for mail servers with collaboration and
synchronization features:
1. Add the network subnet or IP address of the mail server to your Trusted Zone.
2. Set the Trusted Zone security level to Medium. This allows server collaboration
features to work.
3. Set Internet Zone security level to High. This makes your computer invisible to non-
trusted machines.

Chapter 3: Networking with Zone Labs security software Enabling Internet Connection Sharing
Enabling Internet Connection Sharing

If you are using Windows’ Internet Connection Sharing (ICS) option, or a third-party
connection sharing program, you can protect all of the computers that share the
connection from inbound threats by installing Zone Labs security software on the
gateway machine only. However, to receive outbound protection, or to see alerts on the
client machines, you must have Zone Labs security software installed on the client
machines as well.
Before you configure Zone Labs security software, use your ICS software to set
up the gateway and client relationships. If you use hardware such as a router to
share your Internet connection rather than Microsoft’s Internet Connection
Sharing (ICS), ensure that the local subnet is in the Trusted Zone.

Chapter 3: Networking with Zone Labs security software Configuring your VPN connection
Configuring your VPN connection

Zone Labs security software is compatible with many types of VPN client software and
can automatically configure the connection for certain VPN clients.
Supported VPN protocols

Zone Labs security software monitors the VPN protocols listed in the table below.
Networking Protocol Explanation and Comments
AH Authentication Header Protocol

ESP Encapsulating Security Payload protocol
GRE Generic Routing Encapsulation protocol
IKE Internet Key Exchange protocol
IPSec IP Security protocol.
L2TP Layer 2 Tunneling protocol. L2TP is a more secure varia-
tion of PPTP.
LDAP Lightweight Directory Access protocol
PPTP Point-to-Point Tunneling protocol
SKIP Simple Key Management for Internet Protocol
Table 3-1: Supported VPN protocols
Configuring your VPN connection automatically

When VPN traffic is detected, an Automatic VPN Configuration alert is displayed.
Depending upon the type of VPN activity detected, and whether Zone Labs security
software was able to configure your VPN connection automatically, you may see one of
three Automatic VPN Configuration alerts.
For detailed information about the types of Automatic VPN Configuration alerts you
may see and how to respond to them, see “Automatic VPN Configuration alert,” on
page 215.
For instance, manual action may be required if the loopback adaptor or the IP address
of the VPN gateway falls within a range or subnet that you have blocked. For more
information, see “Configuring your VPN connection manually,” on page 36.
If you have created an expert firewall rule that blocks VPN traffic, you will need
to modify the expert rule to allow VPN traffic. See “Creating expert firewall
rules,” on page 55.

Chapter 3: Networking with Zone Labs security software Configuring your VPN connection manually
Configuring your VPN connection manually

If your VPN connection cannot be configured automatically, Zone Labs security
software displays a Manual Action Required alert informing you of the manual changes
you need to make to configure your connection.
Refer to the following sections for manual configuration instructions:
! Adding a VPN gateway and other resources to the Trusted Zone
! Removing a VPN gateway from a blocked range or subnet
! Allowing VPN protocols
! Granting access permission to VPN software
If you have created an expert firewall rule that has blocked PPTP traffic and your
VPN software uses PPTP, you will need to modify the expert rule. See “Creating
expert firewall rules,” on page 55.

Chapter 3: Networking with Zone Labs security software Adding a VPN gateway and other resources to the
Adding a VPN gateway and other resources to the Trusted

Zone
In addition to the VPN gateway, There may be other VPN-related resources that need
to be in the Trusted Zone for your VPN to function properly.
Required Resources Other Resources
The resources below are required by all VPN The resources below may or may not be
client computers and must be added to the required, depending on your specific VPN
Trusted Zone. implementation.
VPN Concentrator DNS servers
Remote host computers connected to the Local host computer’s NIC loopback address
VPN client (if not included in the subnet def- (depending on Windows version). If you
initions for the corporate network) specify a local host loopback address of
127.0.0.1, do not run proxy software on the
local host.
Corporate Wide Area Network (WAN) subnets Internet Gateway
that will be accessed by the VPN client com-
puter
Corporate LANs that will be accessed by the Local subnets
VPN computer
Security servers (for example, RADIUS,ACE,

or TACACS servers)
Table 3-2: Required VPN-related network resources
See “Adding to the Trusted Zone,” on page 47, to learn how to add resources to your
computer’s Trusted Zone.
Removing a VPN gateway from a blocked range or subnet

If the VPN gateway falls within a range or subnet that you have blocked, you must
manually unblock the range.
To unblock an IP range or subnet:

1. Select Firewall|Zones.
2. In the Zone column, select the blocked IP range or subnet.
3. Select Trusted from the shortcut menu, then click Apply.
Allowing VPN protocols

To ensure proper configuration of your VPN software with Zone Labs security
software, you will need to modify your general security settings to allow VPN protocols.
To allow VPN protocols:

1. Select Firewall|Main, then click Advanced.

Networking with Zone Labs security software Granting access permission to VPN software
2. In the General settings area, select the check box labeled Allow VPN protocols.
3. Click OK.
If your VPN program uses protocols other than GRE, ESP, and AH, also select the
check box labeled Allow uncommon protocols at high security.
Granting access permission to VPN software

Grant access permission to the VPN client and any other VPN-related programs.
To grant permission to your VPN program:

1. Select Program Control|Programs.
2. In the Programs column, select your VPN program.
3. In the Access column, click below Trusted, then select Allow from the shortcut menu.
If your VPN program is not listed, click Add to add it to the list.
To grant access to VPN-related components:

1. Select Program Control|Components.
2. In the Components column, select the VPN component for which you want to grant
access.
3. In the Access column, select Allow from the shortcut menu.
If you are experiencing problems with your VPN connection, refer to the VPN
troubleshooting tips in Appendix C,“Troubleshooting,” starting on page 233.

Chapter
Firewall protection
4
Firewall protection is your front line of defense against In-
ternet threats. Zone Labs security software’s default Zones
and security levels give you immediate protection against
the vast majority of threats. If you’re an advanced user,
custom port permissions and expert rules give you detailed
control of traffic based on source, destination, port, proto-
col, and other factors.
Topics:
! “Understanding Firewall protection,” on page 40

! “Choosing security levels,” on page 41
! “Setting advanced security options,” on page 42
! “Managing traffic sources,” on page 46
! “Blocking and unblocking ports,” on page 50
! “Understanding expert firewall rules,” on page 53
! “Creating expert firewall rules,” on page 55
! “Creating groups,” on page 57
! “Managing Expert Firewall Rules,” on page 61
39
Chapter 4: Firewall protection Understanding Firewall protection
Understanding Firewall protection

In buildings, a firewall is a barrier that prevents a fire from spreading. In computers, the
concept is similar. There are a variety of “fires” out there on the Internet—hacker
activity, viruses, worms, and so forth. A firewall is a system that stops these attempts to
damage your computer.
The Zone Labs security software firewall guards the “doors” to your computer—that is,
the ports through which Internet traffic comes in and goes out. Zone Labs security
software examines all the network traffic arriving at your computer, and asks these
questions:
! What Zone did the traffic come from and what port is it addressed to?
! Do the rules for that Zone allow traffic through that port?
! Does the traffic violate any global rules?
! Is the traffic authorized by a program on your computer (Program Control settings)?
The answers to these questions determine whether the traffic is allowed or blocked.

Chapter 4: Firewall protection Choosing security levels
Choosing security levels

The default firewall security levels (High for the Internet Zone, Med. for the Trusted
Zone) protect you from hacker activity (such as a port scan), while enabling you to share
printers, files, and other resources with trusted computers on your local network. In
most cases, you don’t have to make any adjustment to these defaults. You’re protected as
soon as Zone Labs security software is installed!
Setting the security level for a Zone

Security levels make it easy to configure your firewall settings. You can apply a
preconfigured security level (High, Medium, or Off) to each Zone, or you can specify
the port and protocol restrictions for each level. See “Blocking and unblocking ports,”
on page 50.
To set the security level for a Zone:

1. Select Firewall|Main.
2. In the Internet Zone Security area, click the slider and drag it to the desired setting.
High Your computer is in stealth mode, making it invisible to other computers.
Access to Windows NetBIOS (Network Basic Input/Output System) ser-
vices, file and printer shares is blocked.
Ports are blocked unless you have provided permission for a program to use
them.
Med Your computer is visible to other computers.
Access to Windows services, file and printer shares is allowed.
Program permissions are still enforced.
Off Your computer is visible to other computers.
3. In the Trusted Zone Security area, click the slider and drag it to the desired area.
High Your computer is in stealth mode, making it invisible to other computers.
Access to Windows (NetBIOS) services, file and printer shares is blocked.
Ports are blocked unless you have provided permission for a program to use
them.
Med Your computer is visible to other computers.
Off Your computer is visible to other computers.

Chapter 4: Firewall protection Setting advanced security options
Setting advanced security options

Advanced security options enable you to configure the firewall for a variety of special
situations, such as gateway enforcement and Internet Connection Sharing (ICS).
Setting gateway security options

Some companies require their employees to use Zone Labs security software when
connecting to the Internet through their corporate game mode. When the
Automatically check the gateway... control is selected, Zone Labs security software
checks for any compatible gateways and confirms that it is installed so that gateways
requiring Zone Labs security software will grant access.
You can leave this option selected even if you are not connecting through a gateway.
Your Internet functions will not be affected.
Setting ICS (Internet Connection Sharing) options

If you are using ICS (Internet Connection Sharing), use these controls to configure Zone
Labs security software to recognize the ICS gateway and clients.
To set Internet Connection Sharing preferences:

2. Click Advanced.
3. In the Internet Connection Sharing area, choose your security settings.
This computer is not on an ICS/NAT Internet Connection sharing is disabled.
network
This is a client of an ICS/NAT gateway Zone Labs security software automatically
running Zone Labs security software detects the IP address of the ICS gateway and
displays it in the Gateway Address field. You
also can type the IP address into the Gateway
address field.
Selecting Forward alerts from gateway to this
computer will log and display alerts on the cli-
ent computer that occur on the gateway.
This computer is an ICS/NAT gateway Zone Labs security software automatically
detects the IP address of the ICS gateway and
displays it in the Local Address field. You also
can type the IP address into the Gateway
address field.
Selecting Suppress alerts locally if forwarded
to clients, will suppress alerts forwarded from
the gateway to clients to also be displayed on
the gateway.
4. Click OK.

Chapter 4: Firewall protection Setting general security options
Setting general security options

These controls apply global rules regarding certain protocols, packet types and other
forms of traffic (such as server traffic) to both the Trusted Zone and the Internet Zone.
To modify general security settings:

2. Click Advanced.
3. In the General area, choose your security settings.
Block all fragments Blocks all incomplete (fragmented) IP data packets. Hack-
ers sometimes create fragmented packets to bypass or dis-
rupt network devices that read packet headers.
Caution: If you select this option, Zone Labs security soft-
ware will silently block all fragmented packets without
alerting you or creating a log entry. Do not select this
option unless you are aware of how your online connection
handles fragmented packets.
Block trusted servers Prevents all programs on your computer from acting as
servers to the Trusted Zone. Note that this setting over-
rides permissions granted in the Programs panel.
Block Internet servers Prevents all programs on your computer from acting as
servers to the Internet Zone. Note that this setting over-
rides permissions granted in the Programs panel.
Enable ARP protection Blocks all incoming ARP (Address Resolution Protocol)
requests except broadcast requests for the address of the
target computer. Also blocks all incoming ARP replies
except those in response to outgoing ARP requests.
Allow VPN Protocols Allows the use of VPN protocols (ESP, AH, GRE, SKIP)
even when High security is applied. With this option dis-
abled, these protocols are allowed only at Medium secu-
rity.
Allow uncommon protocols Allows the use of protocols other than ESP, AH, GRE, and
at high security SKIP, at High security.
Lock hosts file Prevents your computer’s hosts file from being modified by
hackers through sprayer or Trojan horses. Because some
legitimate programs need to modify your hosts file in order
to function, this option is turned off by default.
Disable Windows Firewall Detects and disables Windows Firewall. This option will
only appear if you are using Windows XP with Service Pack
2.
Filter IP over 1394 traffic Filters FireWire traffic.
4. Click OK.

Chapter 4: Firewall protection Setting network security options
Setting network security options

Automatic network detection helps you configure your Trusted Zone easily so that
traditional local network activities such as file and printer sharing aren’t interrupted.
Zone Labs security software detects only networks that you are physically connected to.
Routed or virtual network connections are not detected.
You can have Zone Labs security software silently include every detected network in the
Trusted Zone; or ask you in each case whether to add a newly detected network.
To specify Network settings:

2. Click Advanced.
3. In the Network settings area, choose your security settings.
Include networks in the Trusted Automatically moves new networks into the
Zone upon detection Trusted Zone. This setting provides the least secu-
rity.
Exclude networks from the Trusted Automatically blocks new networks from being
Zone upon detection added to the Trusted Zone and places them in the
Internet Zone. This setting provides the most
security.
Ask which Zone to place new net- Zone Labs security software displays a New Net-
works in upon detection work alert or the Network Configuration Wizard,
which give you the opportunity to specify the
Zone.
Automatically put new unprotected Puts unsecured wireless networks into the Inter-
wireless networks (WEP or WPA} in net Zone automatically, which prevents unautho-
the Internet Zone rized access to your data from others accessing
the network.
4. Click OK.
For more information about networking, see Chapter 3,“Networking with Zone Labs
security software,” starting on page 29.
Setting wireless network security options

Automatic wireless network detection helps you configure your Internet Zone to ensure
that you computer remains secure without being interrupted each time a new wireless
network is detected. Zone Labs security software detects only wireless networks that
your computer is connected to. (Networks that you are not actually connected to may
appear as available networks in your network neighborhood but the New Wireless
Network Configuration Wizard only appears when you connect establish a connection
to that network.)
You can have Zone Labs security software silently include every detected wireless
network in the Internet Zone.

Chapter 4: Firewall protection Setting wireless network security options
To specify Network settings:

2. Click Advanced.
3. In the Wireless Network settings area, choose your security settings.
Automatically put new unprotected Zone Labs security software places new wireless
wireless networks (WEP or WPA) in networks in the Internet Zone when they are
the Internet Zone detected.
4. Click OK.
For more information about networking, see Chapter 3,“Networking with Zone Labs
security software,” starting on page 29.

Chapter 4: Firewall protection Managing traffic sources
Managing traffic sources

The Zones tab contains the traffic sources (computers, networks, or sites) you have
added to the Trusted Zone or Blocked Zone. It also contains any networks that Zone
Labs security software has detected. If you are using a single, non-networked PC, the
traffic source list displays only your ISP’s (Internet Service Provider’s) network, which
should be in the Internet Zone.
Viewing the traffic source list

The traffic source list displays the traffic sources and the Zones they belong to. You can
sort the list by any field by clicking the column header. The arrow ( ^ ) next to the
header name indicates the sort order. Click the same header again to reverse the sort
order.
Field Description
Name The name you assigned to this computer,

site, or network
IP Address/Site The IP address or host name of the traffic
source
Entry Type The type of traffic source: Network, Host, IP,
Site, or Subnet
Zone The Zone the traffic source is assigned to:
Internet, Trusted, or Blocked
Table 4-1: Traffic source list fields
Modifying traffic sources

From the traffic source list, you can move the traffic source from one Zone to another,
add, edit, or remove a traffic source.
To change the Zone of a traffic source:

2. Locate the traffic source, then click in the Zone column.
3. Select a Zone from the shortcut menu, then click Apply.
To add, remove, or edit a traffic source:

2. In the Name column, click the traffic source, then click Add, Edit, or Remove.
3. Click Apply.

Chapter 4: Firewall protection Adding to the Trusted Zone
Adding to the Trusted Zone

The Trusted Zone contains computers you trust want to share resources with. For
example, if you have three home PCs that are linked together in an Ethernet network,
you can put each individual computer or the entire network adapter subnet in the
Trusted Zone. The Trusted Zone’s default medium security settings enable you to safely
share files, printers, and other resources over the home network. Hackers are confined
to the Internet Zone, where high security settings keep you safe.
To add a single IP address:

2. Click Add, then select IP address from the shortcut menu.
The Add IP Address dialog appears.
3. Select Trusted from the Zone drop-down list.
4. Type the IP address and a description in the boxes provided, then click OK.
To add an IP range:
2. Click Add, then select IP address from the shortcut menu.
The Add IP Range dialog appears.
4. Type the beginning IP address in the first field, and the ending IP address in the
second field.
5. Type a description in the field provided, then click OK.
To add a subnet:
2. Click Add, then select Subnet from the shortcut menu.
The Add Subnet dialog appears.
4. Type the IP address in the first field, and the Subnet mask in the second field.
5. Type a description in the field provided, then click OK.
To add to a Host or Site to the trusted Zone:

2. Click Add, then select Host/Site.
The Add Host/Site dialog appears.

Chapter 4: Firewall protection Adding to the Blocked Zone
3. Select Trusted from the Zones drop-down list.

4. Type the fully qualified host name in the Host name field.
5. Type a description of the host/site, then click OK.
To add a network to the Trusted Zone:

2. In the Zone column, click the row containing the network, then select Trusted from
the shortcut menu.
3. Click Apply.
Zone Labs security software automatically detects new network connections and
helps you add them to the right Zone. For more information, see Chapter
3,“Networking with Zone Labs security software,” starting on page 29.
Adding to the Blocked Zone

To add to the Blocked Zone, follow the instructions for adding to the Trusted Zone, but
select Blocked from the drop-down list in step 2.
Viewing logged Firewall events

By default, all Firewall events are recorded in the Log Viewer.
To view logged firewall events:

1. Select Alerts & Logs|Log Viewer.
2. Select Firewall, from the Alert Type drop-down list.
Table 5-2 provides an explanation the log viewer fields available for Firewall events.
Field Information
Rating Each alert is high-rated or medium-rated.

High-rated alerts are those likely to have
been caused by hacker activity. Medium-
rated alerts are likely to have been caused by
unwanted but harmless network traffic.
Date/Time The date and time the alert occurred.
Type The type of alert: Firewall, Program, ID Lock,
or Lock Enabled.
Protocol The communications protocol used by the
traffic that caused the alert.
Table 4-2: Firewall event log fields

Chapter 4: Firewall protection Viewing logged Firewall events
Field Information
Program The name of the program attempting to send

or receive data. (Applies only to Program and
ID Lock alerts).
Source IP The IP address of the computer that sent the
traffic that Zone Labs security software
blocked.
Destination IP The address of the computer the blocked
traffic was sent to.
Direction The direction of the blocked traffic. “Incom-
ing” means the traffic was sent to your com-
puter. “Outgoing” means the traffic was sent
from your computer.
Action Taken How the traffic was handled by Zone Labs
security software.
Count The number of times an alert of the same
type, with the same source, destination, and
protocol, occurred during a single session.
Source DNS The domain name of the sender of the traffic
that caused the alert.
Destination DNS The domain name of the intended addressee
of the traffic that caused the alert.
Table 4-2: Firewall event log fields

Chapter 4: Firewall protection Blocking and unblocking ports
Blocking and unblocking ports

Zone Labs security software’s default security levels determine which ports and
protocols are allowed and which are blocked. If you are an advanced user, you can
change the definition of the security levels by changing port permissions and adding
custom ports.
Default port permission settings

The default configuration for High security blocks all inbound and outbound traffic
through ports not being used by programs you have given access or server permission
except:
! DHCP broadcast/multicast
! Outgoing DHCP (port 67) - on Windows 9x systems
! Outgoing DNS (port 53) - If the computer is configured as an ICS gateway
Security levels
Traffic Type
HIGH MED OFF
DNS outgoing block n/a allow

DHCP outgoing block n/a allow
broadcast/multicast allow allow allow
ICMP
incoming (ping echo) block allow allow

incoming (other) block allow allow
outgoing (ping echo) block allow allow
outgoing (other) block allow allow
IGMP
incoming block allow allow
outgoing block allow allow
NetBIOS
incoming n/a block allow
outgoing n/a allow allow
UDP (ports not in use by a permitted program)
TCP (ports not in use by a permitted program)
Table 4-3: Default access permissions for incoming and outgoing traffic types

Chapter 4: Firewall protection Adding custom ports
Security levels
Traffic Type
HIGH MED OFF

Table 4-3: Default access permissions for incoming and outgoing traffic types
To change a port’s access permission:

2. In either the Internet Zone Security or the Trusted Zone Security area, click
Custom.
The Custom Firewall Settings dialog appears.
3. Scroll to locate High and Medium security settings.
4. To block or to allow a specific port or protocol, click the check box beside it.
Be aware that when you select a traffic type in the High security settings list, you
are choosing to ALLOW that traffic type to enter your computer under High
security, thus decreasing the protection of the High security level. Conversely,
when you select a traffic type in the Medium security settings list, you are
choosing to BLOCK that traffic type under Medium security, thus increasing the
protection of the Med security level.
Adding custom ports

You can allow communication through additional ports at High security, or block
additional ports at Medium security by specifying individual port numbers or port
ranges.
To specify additional ports:


Chapter 4: Firewall protection Adding custom ports
2. In either the Trusted Zone or Internet Zone area, click Custom.

The Custom Firewall settings dialog appears.
Select one of these

options, then spec-
ify the port number
in the field that
appears.
3. Scroll to the security level (High or Medium) to which you want to add ports.
4. Select the desired port type: incoming UDP, outgoing UDP, incoming TCP, or
outgoing TCP.
5. Type the port or port ranges you want to allow or block in the Ports field, separated
by commas. For example, 139, 200-300

Chapter 4: Firewall protection Understanding expert firewall rules
Understanding expert firewall rules

Expert firewall rules are intended for users experienced with firewall security and
networking protocols.
Expert rules do not take the place of other rules. They are an integral part of the
multiple layer security approach and work in addition to other firewall rules.
Expert rules use four attributes to filter packets:
! Source and/or destination IP address
! Source and/or destination port number
! Network protocol/message type
! Day and Time
Source and destination addresses can be specified in a number of formats, including a
single IP network address, a range of IP addresses, a subnet description, a gateway
address, or a domain name.
Source and destination ports are used only for network protocols that use ports, such as
UDP and TCP/IP. ICMP and IGMP messages, for example, do not use the port
information.
Network protocols can be selected from a list of common IP or VPN protocols, or
specified as an IP protocol number. For ICMP, the message type can also be specified.
Day and Time ranges can be applied to a rule to restrict access based on the day of the
week and the time of day.
How expert firewall rules are enforced

It is important to understand how expert rules are enforced in combination with Zone
rules, program permissions, and other expert rules.
Expert rules and Zone rules
Expert firewall rules are enforced before Zone firewall rules. That is, if a packet matches
an expert rule, that rule is enforced, and Zone Labs security software skips evaluation of
Zone rules.
Example: Imagine you have your Trusted Zone security level set to Medium. This allows
outgoing NetBIOS traffic. However, you have also created an expert rule that blocks all
NetBIOS traffic between the hours of 5PM and 7AM. Any outbound NetBIOS traffic
during those hours will be blocked, in spite of the Trusted Zone setting.
Expert firewall rules and program permissions
Expert rules and Zone rules together are enforced in tandem with Program
permissions. That is, if either your program permissions or Zone rules/expert firewall

Chapter 4: Firewall protection Expert firewall rule enforcement rank
rules determine that traffic should be blocked, it is blocked. Note that this means that
you can use firewall rules to override or redefine program permissions.
Note that packets coming from the Blocked Zone will not be blocked if they are
allowed by an Expert Firewall Rule.
Expert firewall rule enforcement rank

Within the realm of firewall rules, rule evaluation order becomes a factor. Zone Labs
security software first checks expert firewall rules. If a match is found and a rule is
enforced, the communication is marked as either blocked or allowed, and Zone Labs
security software skips evaluation of Zone rules. If no expert firewall rule is matched,
Zone Labs security software checks Zone rules to see if the communication should be
blocked.
The enforcement rank of expert firewall rules is also important. Each rule has a unique
rank number, and rules are evaluated in order of rank. Only the first rule that matches is
executed. Consider these two rules:
Figure 4-4: Expert firewall rule rank order
Rule 1 allows FTP clients in the Trusted Zone to connect to an FTP server on port 21.
Rule 2 blocks all FTP clients from connecting on port 21, regardless of Zone. These two
rules together allow clients in the Trusted Zone to use an FTP server on the client
computer, but block all other FTP access.
If the order of the rules were reversed, Rule 2 would match first, and all FTP access
would be blocked. Rule 1 would never have a chance to execute, so the FTP clients in
the Trusted Zone would still be blocked.

Chapter 4: Firewall protection Creating expert firewall rules
Creating expert firewall rules

Creating expert firewall rules involves specifying the source or destination of the
network traffic to which the rule applies, setting tracking options, and specifying the
action of the rule: whether to block or to allow traffic that meets the specifications of
the rule. You can create new rules from scratch, or you can copy an existing rule and
modify its properties.
To create a new expert firewall rule:

1. Select Firewall|Expert, then click Add.
The Add rule dialog appears.
2. In the General area, specify the rule settings.
Rank The order in which rules will be enforced. A rule with a rank of 1 is
enforced first.
Name Provide a descriptive name for the rule.
State Specify whether the rule is enabled or disabled.
Action Indicates whether to block or allow traffic that matches this rule.
Track Indicates whether to log, alert and log, or do nothing when the expert
rule is enforced.
Comments Optional field for entering notes about the expert rule.
3. In the Source area, select a location from the list, or click Modify, then select Add
location from the shortcut menu. You can add any number of sources to a rule.
My Computer Applies the expert rule to traffic originating on your computer.
Trusted Zone Applies the expert rule to network traffic from sources in your
Trusted Zone.
Internet Zone Applies the expert rule to network traffic from sources in your
Internet Zone.
All Applies the expert rule to network traffic coming from any source.
Host/Site Applies the expert rule to network traffic coming from specified
domain name.
IP Address Applies the expert rule to network traffic coming from specified IP
address.
IP Range Applies the expert rule to network traffic coming from a computer
within the specified IP range.
Subnet Applies the expert rule to network traffic coming from a computer
within the specified subnet.
Gateway Applies the expert rule to network traffic coming from a computer
on the specified gateway.
New Group Choose this option, then click Add to create a new location group
to apply to the expert rule.

Chapter 4: Firewall protection Creating expert firewall rules
Existing Group Choose this option to select one or more location groups to apply
to the expert rule, then click OK.
4. In the Destination area, select a location from the list, or click Modify, then select
Add location from the shortcut menu.
Available location types are the same for Source and Destination locations.
5. In the Protocol area, select a protocol from the list, or click Modify, then select Add
Protocol.
Add Protocol Choose this option to add a protocol to the rule. Specify: TCP, UDP,
TCP + UDP, ICMP, IGMP, or Custom.
New Group Choose this option, then click Add to create a new protocol group to
apply to the expert rule.
Existing Group Choose this option to select one or more protocol groups to apply to
the expert rule, then click OK.
6. In the Time area, select a time from the list, or click Modify, then select Add Time.
Day/Time Choose this option to add a day/time range to the rule. Specify a
Range description, time range and one or more days. Time range is specified
using a 24 hour clock.
New Group Choose this option, then click Add to create a new day/time group to
apply to the expert rule.
Existing Group Choose this option to select one or more day/time groups to apply to
the expert rule, then click OK.
7. Click OK.
To create a new rule from an existing rule:

1. Select Firewall|Expert.
2. Select the expert firewall rule you want to duplicate, then either press Ctrl+C or
right-click the rule and choose Copy.
3. Paste the copied rule either by pressing Ctrl+V, or by right-clicking and choosing
Paste.
If a rule is currently selected in the list, the pasted rule will be inserted above the
selected rule. If no rule is selected, the pasted rule will be inserted at the top of
the rules list.
A “1” is appended to the name of the copied rule. If you paste a rule a second
time, the number 2 is appended to the second rule copied.
4. Click Apply to save your changes.

5. Right-click the new rule and choose Edit to modify the rule properties as necessary.

Chapter 4: Firewall protection Creating groups
Creating groups
Use groups to simplify the management of locations, protocols, and days/times that you
use in your expert firewall rules.
Creating a location group

Use location groups to combine non-contiguous IP addresses and ranges, or different
types of locations (for example, subnets and hosts), into an easily manageable set. You
can then easily add that set of locations to any expert firewall rule.
To create a location group:

1. Select Firewall|Expert, then click Groups.
The Group Manager dialog appears.
2. Select the Locations tab, then click Add.
The Add Location Group dialog appears.
3. Specify the name and description of the location group, then click Add and select a
Location type from the menu.
Host/Site A description and host name of the Host/Site location, then click OK.
Do not include http:// in the host name. Click Lookup to preview the
site’s IP address.
IP Address A description and IP address of the IP Address location, then click
OK.
IP Range A description and beginning IP address and ending IP address of the
IP Range location, then click OK.
Subnet Specify a description, IP address, and Subnet Mask of the Subnet
location, then click OK.
Gateway Specify an IP address, MAC Address, and description of the Gateway
location, then click OK.
4. Click OK to close the Group Manager dialog box.
Once created, the names of groups cannot be changed. For example, if you
create a Location Group named “Home” and subsequently decide to call the
group “Work”, you would need to remove the group called “Home” and create a
new group with the name “Work.”
Creating a protocol group

Create a protocol group to combine well-known TCP/UDP ports, protocols, and
protocol-specific message types (for example, ICMP message types), into sets that you

Chapter 4: Firewall protection Creating a protocol group
can easily add to expert rules. For example, you might create a group including POP3
and IMAP4 protocols in order to simplify the administration of your rules regarding e-
mail traffic.
To create a Protocol group:

2. Select the Protocols tab, then click Add.
The Add Protocol Group dialog appears.
3. Specify the name and description of the Protocols group, then click Add.
The Add Protocol dialog appears.
4. Select a protocol type from the Protocol drop-down list.
# TCP
# UDP
# TCP + UDP
# ICMP
# IGMP
# Custom
5. If you chose TCP, UDP, or TCP/UDP, in step 4, specify a destination, source and
port number.
Name Port number
FTP 21
Telnet 23
POP3 110
NNTP 119
NetBIOS Name 137
NetBIOS Datagram 138
NetBIOS Session 139
IMAP4 143
HTTPS 443
RTSP 554
Windows Media 1755
AOL 5190
Real Networks 7070

Chapter 4: Firewall protection Creating a protocol group
Other Specify port

number
FTP Data 20
TFTP 69
HTTP 80
DHCP 67
DHCP Client 68
SMTP 25
DNS 53
6. If you chose ICMP in step 4, specify a description, message name, and type number.
Message name Type number
Source Quench 4
Redirect 5
Alt 6
Echo Request 8
Router Advertisement 9
Router Solicitation 10
Time Exceeded 11
Parameter Problem 12
Timestamp 13
Timestamp reply 14
Information request 15
Information reply 16
Address Mask Request 17
Address Mask Reply 18
Traceroute 30
Other Specify type
number
7. If you chose IGMP in step 4, specify a description, message name, and type number.
Membership Query 17
Membership Report (ver 1) 18
Cisco Trace 21
Leave Group (ver 2) 23
Multicast Traceroute Response 30

Chapter 4: Firewall protection Creating a day/time group
Multicast Traceroute 31
Other Specify type
number.
8. If you chose Custom in step 4, specify a description, protocol type, and protocol
number.
RDP 27
GRE 47
ESP 50
AH 51
SKIP 57
Other Specify protocol number.
9. Click OK, to close the Add Protocol dialog.
Creating a day/time group

To allow or block network traffic to or from your computer during specified periods of
time, you can create a day/time group and then add it to an expert rule. For example, to
block traffic coming from pop-up ad servers during business hours, you could create a
group that blocks HTTP traffic coming from a specified domain during the hours of 9
AM and 5 PM, Monday through Friday.
To create a Day/Time group:

2. Select the Times tab, then click Add.
The Add Time Group dialog appears.
3. Specify the name and description of the Time group, then click Add.
The Add Time dialog appears.
4. Specify a description of the time, then select a time and day range.
5. Click OK, then click OK to close the Group Manager.

Chapter 4: Firewall protection Managing Expert Firewall Rules
Managing Expert Firewall Rules

From the Expert tab of the Firewall panel, you can view the status of existing expert
rules, enable or disable rules, edit or remove rules, add new rules, change the order of
rules, and create groups.
Viewing the Expert Rules list

The Expert Rules tab presents a list of all expert firewall rules. Rules are listed in order
of enforcement priority (rank). The arrow buttons on the right-hand side more selected
rules up and down the list, changing the enforcement order of the selected rules.
You also can change rank order of rules by dragging and dropping rules from one
position to another.
For example, dragging and dropping rule 2 to the top of the list changes the rank of that
rule to 1.
Use controls to
Rank Tracking
change rule rank
Click to add location, protocol, or
Figure 4-5: Expert Rules list
Rank
The enforcement priority of the rule. Rules are evaluated in order of rank, starting with
number 1, and the first rule that matches will be enforced. Disabled rules will display
“Off ” instead of a rank number, but will retain their rank ordering in the list.
Action
A red means the rule will block network traffic; a green check mark means the
rule will allow network traffic.

Chapter 4: Firewall protection Editing and re-ranking rules
Track
None means no notification when the rule is applied. Log ( ) means a log entry will be
created when the rule is applied. Alert and Log ( ) means that an alert will be
displayed and a log entry will be created when an expert rule is applied.
Name
A descriptive name for the rule.
Source
The source addresses and ports for the rule.
Destination
The destination addresses and ports for the rule.
Protocol
The network protocol to which the rule applies.
Time
The time period during which the rule is active.
Editing and re-ranking rules

You can edit or reorder existing expert rule from the Expert Rules list by selecting rules
and dragging them into the desired rank. Note that if you have copied an expert rule
into the rules for a Program, changing the expert rule does not automatically change the
Program rule. For more information, see “Creating expert rules for programs,” on
page 87.
To edit a rule:
2. Select the rule you want to edit, then click Edit.
The Edit Rule dialog appears.
3. Modify rule attributes as necessary, then click OK.
To change the rank of a rule:

2. Right-click the rule you want to move, then select Move Rule.
Move to Top Moves the selected rule to the top of the Rules list.
Move to Bottom Moves the selected rule to the bottom of the Rules list.
Move Up Moves the selected rule one row up in the Rules list.
Move Down Moves the selected rule one row down in the Rules list.

Chapter
Program control
5
Program Control protects you by making sure that only pro-
grams you trust can access the Internet or perform certain
actions on your computer. You can assign program permis-
sions manually or let Zone Labs security software assign
permissions when program advice is available. Advanced
users can control the ports that each program is permitted
to use.
ZoneAlarm Security Suite includes the added protection of

the Triple Defense Firewall, which prevents even trusted
programs from carrying out potentially malicious behavior.
Topics:
! “Understanding Program Control,” on page 64

! “Setting general program control options,” on page 67
! “Configuring advanced program settings,” on page 74
! “Setting permissions for specific programs,” on page 76
! “Managing program components,” on page 85
! “Creating expert rules for programs,” on page 87
63
Chapter 5: Program control Understanding Program Control
Understanding Program Control

Everything you do on the Internet—from browsing Web pages to downloading MP3
files—is managed by specific programs on your computer.
Hackers exploit this fact by planting “malware”—literally, malicious software—on your
computer. Malware can masquerade as harmless e-mail attachments or as updates to
legitimate programs. Once on your computer, however, the malware can hijack trusted
programs and carry out malicious activities under the guise of legitimacy.
Zone Labs security software protects your computer from hackers and malicious attacks
by assigning policies to programs that indicate their level of trustworthiness, and specify
the actions they are allowed to perform.
ZoneAlarm Security Suite provides the added feature of OSFirewall protection, which
detects when programs try to use your operating system to perform suspicious actions
on your computer.
Setting program permissions automatically

The SmartDefense Advisor and Program Control settings work together to ensure that
good programs are given access and that bad programs are denied access. By default,
Program Control is set to Medium and SmartDefense Advisor is set to Auto. With these
defaults, Zone Labs security software assigns permission to programs automatically. For
information about customizing Program Control and SmartDefense Advisor, see
“Setting general program control options,” on page 67.
If SmartDefense Advisor and Program Control are set to their defaults, one of three
things may occur when a program requests access for the first time:
! Access is granted - Access is granted if the program is known to be safe and requires
the permissions it is asking for in order to function properly.
! Access is denied - Access is denied if the program is a known bad program or if the
program does not require the permissions it is asking for.
! A New Program alert appears - Program alerts appear when you need to decide
whether to allow or deny access to a program. The alert may contain a
recommendation about whether to allow or deny access, and, if neccessary, you can
click More info to get details about the program to help you respond.
As long as SmartDefense Advisor is set to Auto, Zone Labs security software issues
Program alerts only if no automatic setting is available. If you choose Remember
this setting in a Program alert when allowing or denying program access, Zone Labs
security software keeps your setting unless SmartDefense Advisor comes out with a
different setting, or until you change the setting manually in the Programs tab. If you
do not choose Remember this setting, Zone Labs security software will issue
another Program alert the next time the program attempts the same action. For more
information about Program alerts, see “Program alerts,” on page 209

Chapter 5: Program control Setting program permissions manually
Safe programs
Zone Labs security software validates your programs against a database of known safe
programs and automatically assigns the permissions required for the programs to
function properly. If you accepted the default program settings in the Configuration
Wizard, Zone Labs security software is set up to automatically configure the most
popular programs in the following general categories:
! Browsers (e.g., Internet Explorer, Netscape)
! E-mail applications (e.g., Microsoft Outlook, Eudora)
! Instant Messengers (e.g., AOL, Yahoo!)
! Anti-virus (e.g., Symantec, Zone Labs)
! Document utilities (e.g., WinZip® and Adobe® Acrobat®)
! Zone Labs software applications
Even programs that are considered safe can be used by hackers to perform actions that
are not. OSFirewall protection, available in ZoneAlarm Security Suite, displays alerts
when it detects suspicious program behavior. For more information about these alerts,
see “Program alerts,” on page 209.
Setting program permissions manually

If you want to assign permissions to programs on your own, or if Zone Labs security
software was unable to assign permissions automatically, you can set permissions
manually by using Program alerts, or by setting permissions for specific programs on
the Programs tab of the Program panel.
Program alerts
When a program requests access for the first time, a New Program alert asks you if you
want to grant the program access permission. When a program is detected to be
listening to the ports on your computer, a Server Program alert is displayed.
Suspicious behavior alerts inform you that a trusted or unknown program on your
computer is trying to perform an action that could be considered suspicious. For a list
of actions that are considered suspicious, see “Program behavior,” on page 251.
To avoid seeing numerous alerts for the same program, select Remember this setting
before clicking Allow or Deny. Zone Labs security software will continue to apply your
Allow or Deny setting (without issuing alerts) unless you set SmartDefense Advisor to
Auto and it has a setting different from yours.
Because Trojan horses and other types of malware often need server rights in order to
do mischief, you should be particularly careful to give server permission only to
programs that you know and trust, and that need server permission to operate properly.
Several common types of applications, such as chat programs, e-mail clients, and
Internet Call Waiting programs, may need server permission to operate properly. Grant

Chapter 5: Program control Setting program permissions manually
server permission only to programs you're sure you trust, and that require it in order to
work.
If possible, avoid granting a program server permission for the Internet Zone. If you
need to accept incoming connections from only a small number of machines, add those
machines to the Trusted Zone, and then allow the program server permission for the
Trusted Zone only.
For more information about program alerts, see “Program alerts,” on page 209.
You also can allow Zone Labs security software to automatically allow or deny all
new programs without displaying an alert. For example, if you are sure you have
given access permission to all the programs you want, you might automatically
deny access to any other program that asks for permission. For more information,
see “Setting access permissions for new programs,” on page 74.
Programs list
The Programs list allows you to set or customize permissions for specific programs
based on your individual needs. For more information about using the Programs list and
customizing permissions, see “Using the programs list,” on page 76.

Chapter 5: Program control Setting general program control options
Setting general program control

options
When you’re using Zone Labs security software, no program on your computer can
access the Internet or your local network, or act as a server, unless it has permission to
do so.
Setting the program control level

Zone Labs security software offers several methods of program control. Basic program
control lets you determine access and server rights for individual programs. Advanced
Program Control prevents malware from misusing trusted programs. Application
Interaction Control alerts you if a process tries to use another process or a program tries
to start another program. OSFirewall protection detects when programs try to use your
operating system to perform suspicious actions on your computer. (This section
explains how to set a general program control level, and how to customize settings for
Advanced Application Control and Application Interaction Control. For details on
OSFirewall, see “Configuring OSFirewall protection,” on page 68.)
To limit the number of alerts you see and to benefit from Zone Labs’ recommended
program settings, use SmartDefense Advisor in conjunction with program control. For
details on SmartDefense Advisor, see “Setting the SmartDefense Advisor level,” on
page 69.
To set the program control level:

1. Select Program Control|Main.
2. In the Program Control area, click the slider and drag it to the desired setting.
High With this setting, you may see a large number of alerts.
% Programs must ask for Internet access and server rights.
% OSFirewall will monitor for suspicious behaviors.
% Advanced Program control and Application Interaction Control

are enabled.
% By default, component control is disabled.*
Medium This is the default setting.
% Programs must ask for Internet access and server rights.
% OSFirewall will monitor for suspicious behaviors.

Low % Program control is in learning mode (no alerts are displayed).
% OSFirewall is disabled.

Chapter 5: Program control Configuring OSFirewall protection
Off Program control is disabled.

% No programs or components are authenticated or learned.
% No program permissions are enforced.
% All programs are allowed access/server rights.
% All programs are allowed to perform suspicious behavior.
% No program alerts are displayed.

* Component control is disabled by default. If you have turned component control on, it will
remain enabled as long as program control is set to High, Medium, or Low. For informa-
tion about component control, including directions for turning it on, see “Enabling Com-
ponent Control,” on page 69.
To set custom program control options:

2. In the Program Control area, click Custom.
The Custom Program Control Settings dialog appears.
3. On the Program Control tab, specify the settings to apply.
Enable Advanced Program Control Prevents trusted programs from being used by
untrusted programs to circumvent outbound
protection.
Enable Application Interaction Control Alerts you when a process attempts to use
another process or any time a program
launches another program.
4. Click OK.
Configuring OSFirewall protection

OSFirewall protection, which is enabled by default, detects when programs try to use
your operating system to perform suspicious actions on your computer. You can also
configure various OSFirewall Special System Protections, which determine whether
programs on your computer can perform specific actions such as modifying your
Internet Explorer home page or installing ActiveX controls.
To configure OSFirewall settings:

3. In the Custom Program Control Settings dialog box that appears, select the
OSFirewall tab.
4. Select or deselect Enable OSFirewall, as desired. (Note that, to configure any
OSFirewall Special System Protections in the next step, you must first enable
OSFirewall.)

Chapter 5: Program control Enabling Component Control
5. Optionally, configure any OSFirewall Special System Protections. For any action in
the list, click the State field and select Allow, Deny, Ask, or Use Program Setting.
If you choose Use Program Setting, Zone Labs security software defers to
SmartDefense Advisor settings or to your manual settings.
6. Click Apply to save the setting and leave the dialog open, or OK to save the setting
and close the dialog.
Enabling Component Control

In addition to controlling permissions for all programs on a computer, advanced users may
also want to monitor and, if desired, restrict individual components that these programs
load (such as DLL files or ActiveX controls). Zone Labs security software keeps a list of
components (used by allowed programs) that have tried to access the Internet or the
local network. Depending on your program control and component control settings,
Zone Labs security software can simply monitor components or it can alert you each time
a new component attempts access. This section explains how to enable component
control. For details about viewing the Components List and modifying component
permissions manually, see “Managing program components,” on page 85.
By default, component control is turned off, though Zone Labs security software does add
components to the Components List. If you enable component control and set program
control to Medium, component control tracks components but does not restrict their
activity. If you then reset program control to High, component control grants access to all
previously known components but prompts you to allow or deny any components
discovered subsequently. For advanced users concerned about component activity, the
best practice is to install Zone Labs security software on a freshly set up computer, enable
component control and set the program control level to Medium, and, after Zone Labs
security software has had a chance to detect all normal components that require access,
reset program control to High. (For information about the program control setting, see
“Setting the program control level,” on page 67.)
To enable component control:

The Custom Program Control Settings dialog appears.
3. On the Program Control tab, select Enable component control.
4. Click OK.
Setting the SmartDefense Advisor level

Whenever you use a program that requests access, SmartDefense Advisor queries the
Zone Labs server to determine the policy for that program. You can choose to have
SmartDefense Advisor set the permissions for the program automatically, or you can

Chapter 5: Program control Enabling the automatic lock
configure program access manually. The SmartDefense Advisor level is set to Auto by
default.
If you set SmartDefense Advisor to Auto and there is no advice available for a program,
Zone Labs security software displays a Program alert prompting you to allow or deny
access to the program. If you select Remember this setting when responding to such a
Program alert, Zone Labs security software keeps your setting unless SmartDefense
Advisor comes out with a different setting, or until you change the setting manually in
the Programs tab.
For information about setting program permissions manually, see “Setting permissions
for specific programs,” on page 76. You can set SmartDefense Advisor to Manual or
Off and set all program permissions manually. Or, you can set SmartDefense Advisor to
Auto and set manual program permissions only when SmartDefense Advisor does not
recommend a policy.
To set the SmartDefense Advisor level

2. In the SmartDefense Advisor area, choose your setting.
Auto In Auto mode, SmartDefense Advisor automatically implements the
recommendation returned from the server. Program Control must be
set to Medium or High to set SmartDefense Advisor to Auto.
Manual In Manual mode, you will receive Program alerts when programs
request access and can set the permission on your own.
Off SmartDefense Advisor will not contact the server for program advice.
Enabling the automatic lock

The automatic Internet lock protects your computer if you leave it connected to the
Internet for long periods even when you’re not actively using network or Internet
resources.
When the lock engages, only traffic initiated by programs to which you have given pass-
lock permission is allowed. All traffic to and from your computer is stopped, including
DHCP messages, or ISP heartbeats, used to maintain your Internet connection. As a
result, you may lose your Internet connection.
You can set the Internet lock to engage:
! When your screen saver engages, or
! After a specified number of minutes of network inactivity.
To enable or disable the automatic lock:

1. Select Program Control | Main.
2. In the Automatic Lock area, select On or Off.

Chapter 5: Program control Viewing logged program events
To set automatic lock options:

1. Select Program Control | Main.
2. In the Automatic Lock area, click Custom.
The Custom Lock Settings dialog appears.
3. Specify the lock mode to use.
Lock after n minutes of inactivity Engages automatic lock after the specified
number of minutes has passed. Specify a
value between 1 and 99.
Lock when screensaver activates Engages automatic lock whenever your
screensaver is activated.
4. If desired, specify Internet access permissions for periods when the lock is engaged.
Allow pass-lock programs to access the Allows programs with pass-lock permission to
Internet access the Internet. Programs without
pass-lock permission have no access. This is
the default behavior when the lock is
engaged.
Block all Internet access Prevents all programs, regardless of pass-lock
status, from accessing the Internet when the
lock is engaged.
5. Click OK.
Viewing logged program events

By default, all Program events are recorded in the Log Viewer.
To view logged program events:

2. Select Program, from the Alert Type drop-down list.
Table 5-1 provides an explanation of the log viewer fields available for Program events.
Field Explanation
Rating Event rating based on the Protection Level of the security

option.
Date/Time Date and time the event occurred.
Table 5-1: Program event log fields

Chapter 5: Program control Viewing logged program events
Field Explanation
Type Type of program alert that occurred. Possible values for this
column include:
• Program Access
• Repeat Program
• New Program
Program The program (displayed as the application file) that requested
access. If a program name is unavailable, refer to the Descrip-
tion field of the Entry Details window.
Source IP The IP address of the computer sending the request. If the
source IP cannot be determined, this field may be left blank.
Destination IP The IP address of the computer receiving the request. If the
destination IP cannot be determined, this field may be left
blank.
Direction Specifies whether the request that caused the event was
incoming, outgoing, or occurred as a result of internal traffic
on your computer (data).
Action Taken Specifies whether the request was Allowed or Blocked. Action
is followed by /
Count The number of times this action was taken.
Source DNS The domain name server of the computer that is sending the
request.
Destination DNS The domain name server of the computer that is receiving the
request.
Table 5-1: (Continued)Program event log fields

Chapter 5: Program control Viewing logged OSFirewall events
Viewing logged OSFirewall events

By default, all OSFirewall events are recorded in the Log Viewer.
To view logged OSFirewall events:

2. Select OSFirewall, from the Alert Type drop-down list.
Table 5-2 provides an explanation of the log viewer fields available for OSFirewall
events.
Field Explanation
Rating Event rating based on the Protection Level of the security option.
Date/Time Date and time the event occurred.
Type Type of OSFirewall alert that occurred. Possible values for this
column include:
• Process
• Message
• Module
• Registry
• File
• Execution
• Driver
• Physical memory
Subtype The specific event that initiated the Type of access requested
(for example, OpenThread would be a subtype of Process).
Data The path to the file that was attempting to be modified.
Program Displays the path to the program that performed the behavior.
Action Taken Specifies whether the request was Allowed or Blocked. Action is
followed by /manual or /auto to indicate whether the action was
performed by you or by SmartDefense Advisor.
Count The number of times this action was taken.
Table 5-2: OSFirewall event log fields

Chapter 5: Program control Configuring advanced program settings
Configuring advanced program settings

By default, Zone Labs security software always asks you whether to block or to allow
connection attempts and server access attempts for the Internet and Trusted Zones. In
addition, if the TrueVector service is running, but Zone Labs security software is not,
program access is denied by default.
Setting global program properties

You can customize program control by specifying whether access is always allowed,
always denied, or if you want to be asked, each time a program in either the Internet or
Trusted Zone requests access.
To set global program properties:

2. Click Advanced, then select the Alerts & Functionality tab.
3. Specify global program options.
Show alert when Internet access is Displays a Blocked Program alert when Zone Labs
denied security software denies access to a program. To
have access denied silently, clear this option.
Deny access if permission is set to In rare cases, an independent process such as a
“ask” and the TrueVector service is Trojan horse could shut down the Zone Labs secu-
running but Zone Labs security rity software user interface, but leave the TrueVec-
software is not tor service running.
This setting prevents the application from hang-
ing if this occurs.
Require password to allow a pro- Prompts you to enter a password to grant access
gram temporary Internet access permission. Requires that you be logged in to
respond Yes to a Program alert.
To allow access without a password, clear this
option.
4. Click OK.
Setting access permissions for new programs

Zone Labs security software displays a New Program alert when a program on your
computer tries to access the Internet or local network resources for the first time. It
displays a Server Program alert when a program tries to act as a server for the first time.
However, you can configure Zone Labs security software to automatically allow or
block new programs without displaying an alert. For example, if you are sure you have
given access permission to all the programs you want, you might automatically deny
access to any program that asks for permission.
To set connection attempt permissions for new programs:


Chapter 5: Program control Setting access permissions for new programs
2. Click Advanced.
3. In the Connection Attempts area, specify your preferences for each Zone.
Always allow access Allows all new programs access to the specified Zone.
Always deny access Denies programs access to the specified Zone.
Always ask for permission Displays an alert asking for permission for the program to
access the specified Zone.
Settings for individual programs can be established in the Programs tab.

Settings in this panel apply ONLY to programs not yet listed in the Programs tab.
To set server attempt permissions for new programs:

2. Click Advanced.
In the Server Attempts area, specify your preferences for each Zone.
Always accept the connection Allows all programs attempting to act as a server.
Always deny the connection Denies all programs attempting to act as a server.
Always ask before connecting Displays an alert asking for permission for the pro-
gram to act as a server.

Chapter 5: Program control Setting permissions for specific programs
Setting permissions for specific

programs
In some cases, you may want to specify different settings for an individual program than
the global program control level will allow. For example, if you wanted to allow access to
a particular program, but keep security High for all other programs, you could set the
permission for that program to Allow.
After you manually set permissions for a program, the permissions for that
program will not change even if you later set the SmartDefense Advisor level to
Auto. To benefit from automatic program advice, remove the program from the
Programs List, then set the SmartDefense Advisor level to Auto.
Using the programs list

The programs list provides an overview of the programs on your computer that have
tried to access the Internet or the local network. For each program, the program list
provides detailed information about its current state, trustworthiness, and the functions
it is allowed to perform. The programs list is organized in alphabetical order. You can
sort the programs in the list by any column by clicking on column header. As you use
your computer, Zone Labs security software detects every program that requests
network access and adds it to the programs list. To access the Programs List, select
Program Control|Programs.
Selecting a program name in the list displays program information in the yellow Entry
Detail area below the list. This area provides details about the program, including its full
name, the program’s OSFirewall policy, and the date of the last policy update.
The SmartDefense Advisor and Trust Level columns indicate OSFirewall Protection for
your computer and specify whether a program is allowed to perform operating system-

Chapter 5: Program control Using the programs list
level actions like changing TCP/IP parameters, loading or installing drivers, or changing
your browser’s default settings.
status indicator
Figure 5-3: Programs list
Active
Indicates the current status of a program. A green circle indicates that the program is
currently running.
Programs
The name of the program.
SmartDefense Advisor
The SmartDefense Advisor column indicates where the program policy comes from.
The column may contain any of the following designations:
! Auto—SmartDefense Advisor determines the program policy, unless a
recommendation is not available. (Note that, if SmartDefense Advisor is turned on,
and you select Remember this setting when responding to a Program alert, the
SmartDefense Advisor column will still say Auto, since the permissions will still
change to conform to any SmartDefense Advisor recommendations that come out
later.)
! Custom—You determined the program policy manually. If you change a program’s
permissions (by changing a value in any of the columns in the program’s row, for
example), the SmartDefense Advisor column displays “Custom” for that program.

Chapter 5: Program control Using the programs list
! System—SmartDefense Advisor determines the program policy, and the program is

used by your operating system.
Manually changing the policy for “System” programs could interfere with the
normal functions of your computer.
Trust Level
The Trust Level determines the actions that a program is allowed to perform. The Trust
Levels are Super, Trusted, Restricted, Ask, Kill, and No Enforcement.
A program’s Trust Level setting is determined by its policy. Zone Labs security software
assigns policies to known programs automatically. The SmartDefense Advisor security
team constantly monitors programs for changes in behavior and trustworthiness and
updates the programs permissions accordingly. A program with a Trust Level setting of
Super today, might have a Trust Level of Restricted tomorrow, if security experts
determine that the program could pose a risk to your computer. Once a program’s
policy setting has been changed from Auto to Custom, however, it will no longer be
monitored for changes in Trust Level. For this reason, it is recommended that you keep
the default settings for your programs. Refer to the table below for a description the
symbols used in this list.
Access
The Access column refers to a program’s right to retrieve information from the Internet
or networks in the Trusted Zone.
Server
Allows a program to passively listen for contact from the Internet or network. Few
programs require server rights.

Chapter 5: Program control Adding a program to the programs list
Send Mail
Allows a program to send and receive e-mail.
Refer to the table below for a description of the symbols used in this list..
Symbol Meaning
The program is currently active.
The program is allowed access/server rights.
When this symbol appears in the Access or Server

columns, it means that Zone Labs security software
will display a Program alert when the program asks
for access, server rights.
When this symbol appears in the Trust Level col-
umn, it means that Zone Labs security software will
display a Suspicious Behavior alert when a program
performs actions considered suspicious.
The program is denied access/server rights.
Super access. Program can perform suspicious

actions without seeking permission. No alerts will
be displayed.
Trusted access. Trusted Programs can perform sus-
picious actions without seeking permission, but
unknown programs must ask for permission.
Restricted access. Program can perform trusted-
level actions but cannot perform suspicious
actions.
No access. Programs marked with the No access
(Kill) symbol cannot run.
No enforcement. Program is not monitored at all
and can perform any action whatsoever. This set-
ting can pose a security risk.
Table 5-3: Program List symbols
For more information about what program actions are considered suspicious, see
Appendix D,“Program behavior,” starting on page 251.
Adding a program to the programs list

If you want to specify access or server permission for a program that does not appear
on the programs list, you can add the program to the list and then grant the appropriate
permissions.

Chapter 5: Program control Granting a program permission to access the Internet
To add a program to the programs list:

1. Select Program Control|Programs, then click Add.
The Add Program dialog appears.
2. Locate the program you want to add, then click Open.
Be sure to select the program’s executable file (for example, program.exe).
To edit a program on the programs list:

2. Right-click a program in the Programs column and choose one of the available
options.
Changes Fre- If this option is selected, Zone Labs security software will use only file
quently path information to authenticate the program. The MD5 signature will
not be checked.
Caution: This is a Low security setting.
Options Opens the Program Options dialog box, in which you can customize
security options and create expert rules for programs.
Properties Opens your operating system’s properties dialog box for the program.
Remove Deletes the program from the list.
Granting a program permission to access the Internet

Many of your most commonly used programs can be automatically configured for safe
Internet access. To determine whether a program was configured manually or
automatically, select the program in the Programs List and refer to the Policy field in the
Entry Details area.
To grant a program permission to access the Internet:

2. In the Programs column, click the program for which you want to grant access, then
select Allow from the shortcut menu.
For information about granting programs permission by responding to an alert, see
“New Program alert,” on page 210.
Built-in rules ensure a consistent security policy for each program. Programs
with access to the Internet Zone also have access to the Trusted Zone, and
programs with server permission in a Zone also have access permission for that
Zone. This is why (for example) selecting Allow under Trusted Zone/Server
automatically sets all of the program’s other permissions to Allow.

Chapter 5: Program control Granting a program permission to act as a server
Granting a program permission to act as a server

Exercise caution when granting permission for programs to act as a server, as Trojan
horses and other types of malware often need server rights in order to do mischief.
Permission to act as a server should be reserved for programs you know and trust, and
that need server permission to operate properly.
To grant a program permission to act as a server:

2. In the Programs column, click the program for which you want to grant server
access, then select Allow from the shortcut menu.
Granting send mail permission to a program

To enable your e-mail program to send e-mail messages and to enable protection against
e-mail threats, grant send mail permission to your e-mail program. For more
information about protecting your e-mail, see Chapter 7, “E-mail protection,” starting
on page 115.
To grant send mail permission to a program:

2. Select a program from the list, then click in the Send Mail column.
3. Select Allow from the shortcut menu.
You also can access the Program Options dialog by right-clicking a program
name and selecting Options.

Chapter 5: Program control Setting program options for a specific program
Setting program options for a specific

program
How a program is authenticated, whether it uses Outbound MailSafe protection, or is
held to privacy standards, is determined globally by setting the Program Control level.
You can modify these and other settings on a per-program basis from the Programs
List.
Setting Advanced Program Control options

Advanced Program Control tightens your security by preventing unknown programs
from using trusted programs to access the Internet, or preventing hackers from using
the Windows CreateProcess and OpenProcess functions to manipulate your computer.
To enable Advanced Program Control for a program:

2. In the Programs column, select a program, then click Options.
The Program Options dialog appears.
3. Select the Security tab, then choose your Advanced Program Control options.
This program may use other pro- Allows the selected program to use other pro-
grams to access the Internet grams to access the Internet.
Allow Application Interaction Allows the selected program to use OpenProc-
ess and CreateProcess functions on your com-
puter.
4. Click OK.
Disabling Outbound Mail protection for a program

By default, Outbound Mail protection is enabled for all programs. Because the ability to
send e-mail is not a characteristic of all programs, you may choose to disable Outbound
Mail protection for any program that does not require it.
To disable Outbound Mail protection for a program:

2. Select a program from the list, then click Options.
3. Select the Security tab.

Chapter 5: Program control Setting Filter options for a program
4. Clear the check box labeled Enable Outbound MailSafe Protection for this
program.
This check box will not appear unless the SendMail permission for this program
is set to Allow.
5. Click Apply to save your changes, then click OK.

For more information about Outbound MailSafe Protection, see “Outbound MailSafe
protection,” on page 117.
Setting Filter options for a program

When Parental Control and Privacy features are enabled globally, individual programs
like Word Processing programs can still access restricted content unless filter options
have also been enabled for that program. For example, although Parental Control blocks
access to the site “http://www.playboy.com” from your browser, the site could still be
accessed by clicking a URL within a Microsoft Word document unless Parental Control
was also enabled for that program.
To enable filter options for a program:

4. Under Filter Options, select the check box beside the protection you want, then click
OK.
For more information about Privacy protection, see Chapter 8, “Privacy
protection,” starting on page 135. For more information about Parental Control, see
Chapter 11, “Parental Control,” starting on page 181.
Setting authentication options

You can specify whether a program is authenticated by using its full pathname or by its
components. By default, all programs are authenticated by their components.
To specify an authentication method:


Chapter 5: Program control Setting passlock permission for a program
4. Under Authentication, select the check box beside the option you want, then click
OK.
Setting passlock permission for a program

When the Internet Lock is engaged, programs given passlock permission can continue
to access the Internet. If you grant passlock permission to a program, and that program
uses other applications to perform its functions (for example, services.exe), be sure to
give those other programs passlock permission as well.
To grant or revoke passlock permission:

3. Select the Enable Pass Lock check box.

Chapter 5: Program control Managing program components
Managing program components

In addition to controlling permissions for all programs on a computer, advanced users may
also want to monitor and, if desired, restrict individual components that these programs
load (such as DLL files or ActiveX controls). Zone Labs security software keeps a list of
components (used by allowed programs) that have tried to access the Internet or the
local network. Depending on your program control and component control settings,
Zone Labs security software can simply monitor components or it can alert you each time
a new component attempts access. This section explains how to access the Components
List and how to change component permissions. For details about enabling component
control, see “Enabling Component Control,” on page 69.
The Components List contains a list of program components for allowed programs that
have tried to access the Internet or the local network. The Access column indicates
whether the component is always allowed access, or whether Zone Labs security
software should alert you when that component requests access. By default, the
Components List is organized in alphabetical order, but you can sort the components in
the list by any column by clicking on the Component column header.
To access the Components List:

Select Program Control | Components.
Figure 5-4: Components List
To grant access permission to a program component:

1. Select Program Control|Components.

Chapter 5: Program control Managing program components
2. Select a component from the list, then click in the Access column.
3. Select Allow from the shortcut menu.

Chapter 5: Program control Creating expert rules for programs
Creating expert rules for programs

By default, programs given access permission or server permission can use any port or
protocol, and contact any IP address or host at any time. Conversely, programs that you
block have no access rights at all. By creating expert rules for particular programs, you
can heighten protection against hijacked programs by specifying ports and protocols,
source and destination addresses, and time and day ranges during which activity is either
allowed or denied. You can also apply tracking options to specific types of traffic in
order to see alerts or generate log entries when allowed program traffic occurs, enable or
disable rules at will, and apply multiple, ranked rules to a program.
If you created port rules for Programs in a version of Zone Labs security software,
prior to 4.0, those port rules will be automatically converted to expert rules and
visible in the Expert tab of the Program Options dialog. To access the Expert tab,
select Program Control|Programs, then click Options.
Creating an expert rule for a Program

Expert rules for programs are enforced in the order they are ranked. Therefore, when
you create expert rules for a program, make sure that the last rule you create for that
program is a “Block All” rule.
For tips on setting up expert rules for your programs, visit the Zone Labs User
Forum (http://www.zonelabs.com/forum) and search for “program rules”.
To create an expert rule for a program:

1. Select Program Control|Programs, then click Options.
2. Select Expert Rules, then click Add.
The Add rule dialog appears.
3. Create Expert Program rule.
The Add rule dialog contains the same fields and options that are available when
you create Expert Firewall rules. Note, however, that IGMP and Custom protocols
cannot be applied to expert rules for Programs. See “Creating expert firewall
4. Click OK.

Chapter 5: Program control Sharing expert rules
Sharing expert rules

Expert firewall rules (created in the Expert tab in the Firewall panel) cannot be directly
applied to a single program. If the rule is enabled, it is applied globally. Similarly, an
expert rule you created for one program cannot be directly applied to another program.
However, you can create a copy of the existing expert rule and apply it to any program.
Note that none of the changes you make to the copy will be reflected in the original.
To apply an existing expert firewall rule to a program:

2. Select the rule you want to apply, then press CTRL+C.
4. In the Programs column, select the program to which you want to apply the expert
rule, then click Options.
5. Select Expert Rules, then press CTRL+V.
The Expert rule is applied to the program.
To disable an Expert rule:

2. Select the program for which you want to disable an Expert Program rule, then
right-click and select Disable from the shortcut menu.
The rule will be grayed-out.

Chapter
Spyware and Virus protection
6
The integrated Anti-virus and Anti-spyware feature protects
your computer against viruses and spyware in a single pow-
erful operation. Multiple scanning options automatically
detect viruses and spyware and render them harmless be-
fore they can damage your computer.
Spyware Community Watch updates your signature data-

base with information on the latest spyware outbreaks
gathered from more than 30 million Zone Labs users.
The Anti-virus feature is only available in ZoneAlarm Anti-

virus and ZoneAlarm Security Suite.
The Anti-spyware feature is only available in ZoneAlarm

Anti-Spyware, ZoneAlarm Pro, and ZoneAlarm Security
Suite.
Topics:
! “Spyware and Virus Protection,” on page 90

! “Customizing virus protection options,” on page 93
! “Customizing spyware protection options,” on page 97
! “Performing a virus scan,” on page 99
! “Performing a spyware scan,” on page 104
! “Viewing virus and spyware protection status,” on page 109
! “Monitoring virus protection,” on page 110
89
Chapter 6: Spyware and Virus protection Spyware and Virus Protection
Spyware and Virus Protection

The Anti-spyware feature detects spyware components on your computer and either
removes them automatically, or places them in quarantine so that you can remove them
manually after assessing their risk.
The Anti-virus feature keeps known and unknown viruses from affecting your
computer by scanning files and comparing them to a database of known viruses and
against a set of characteristics that tend to reflect virus behavior. Files can be scanned as
they are opened, closed, executed, or as part of a full computer-wide scan. If a virus is
detected, Zone Labs security software renders it harmless, either by repairing or denying
access to the infected file.
Turning on virus and spyware protection

If you are using ZoneAlarm Security Suite and you chose not to turn on the anti-virus
protection feature in the Configuration Wizard following installation, you can turn it on
manually.
The Zone Labs Anti-virus protection feature is incompatible with other virus
protection software. Before you turn on the Anti-virus protection feature, you
must uninstall any other anti-virus software from your computer, including suite
products that include virus protection among their features. Zone Labs security
software can automatically uninstall some anti-virus applications for you. If you
are using a program that cannot be uninstalled automatically, you can uninstall
it using Add/Remove Programs, accessible from the Windows Control Panel.
To enable virus and spyware protection:

1. Select Anti-virus / Anti-spyware|Main.
2. In the Anti-virus area, select On.
3. In the Anti-spyware area, select On.
Scheduling a scan
Scanning your computer for viruses and spyware is one of the most important things
you can do to protect the integrity of your data and computing environment. Since
scanning is most effective when performed at regular intervals, it often makes sense to
schedule it as a task to run automatically. If your computer is not on when the scheduled
scan is set to occur, the scan will occur fifteen minutes after your computer is restarted.
To schedule a scan:
1. Select Anti-virus/Anti-spyware|Main.
2. In the Anti-virus area, click Advanced Options.
The Advanced Options dialog appears.

Chapter 6: Spyware and Virus protection Updating virus and spyware definitions
3. Under Advanced Settings, select Scan Schedule.

4. Select the Scan for viruses check box, then specify a day and time for the scan.
5. Specify the scan frequency.
By default, a virus scan is performed once per week.
6. Select the Scan for spyware check box, then specify a day and time for the scan.
7. Specify the scan frequency.
By default, a spyware scan is performed once per week.
8. Click OK.
Updating virus and spyware definitions

Every virus or spyware application contains unique identification information, known
as its definition file. These definition files are the maps used to locate viruses and
spyware on your computer. As new viruses or spyware applications are discovered,
Zone Labs security software updates its databases with the definitions files it needs to
detect these new threats. Therefore, your computer is vulnerable to viruses and spyware
whenever its database of virus definitions files becomes outdated. The Details area

Chapter 6: Spyware and Virus protection Updating virus and spyware definitions
located on the Main tab of the Anti-virus / Anti-spyware panel displays the status of
your definition files.
Indicates that definition files Click here to update

are out of date definition files.
Figure 6-1: Anti-virus and Anti-spyware status
By enabling the automatic update feature, you will always receive the latest definition
files when they are available.
To enable automatic updates:

2. In the Anti-virus area, click Advanced Options.
3. Select Updates, then select the enable automatic anti-virus updates check box.
4. Select the enable automatic anti-spyware updates check box.
5. Click OK.

Chapter 6: Spyware and Virus protection Customizing virus protection options
Customizing virus protection options

In addition to choosing the type of scan you want to perform, you also can specify the
method used to detect viruses, and set treatment methods.
Zone Labs security software provides several types of virus scans to keep your
computer and data safe: system scans, on-access scans, and e-mail scans.
Specifying scan targets

You can specify which drives, folders, and files are scanned when a system scan occurs.
Exclude or include an item in the scan by selecting the check box beside it. By default,
Zone Labs security software only scans local hard drives.
Figure 6-2: Scan targets dialog box
Table 6-2 below provides an explanation of the icons shown in the Scan Targets dialog
box.
Icon Explanation
The selected disk and all sub-folders and files will be

included in the scan.
The selected disk and all sub-folders and files will be
excluded from the scan.
Table 6-2: Icons indicating scan targets

Chapter 6: Spyware and Virus protection On-Access scanning
Icon Explanation
The selected disk will be included in the scan, but one or

more sub-folders or files will be excluded from the scan.
The selected folder will be excluded from the scan, but one or
more sub-folders or files will be included in the scan.
The selected folder will be included in the scan. A gray check
mark indicates that scanning of the folder or file is enabled
because scanning has been enabled for a higher level disk or
folder.
The selected folder will be excluded from the scan. A gray “x”
mark indicates that scanning of the folder or file is disabled
because scanning has been disabled for a higher level disk or
folder.
Table 6-2: Icons indicating scan targets
To specify scan targets:

2. Click Advanced Options.
3. Under Virus Management, select Scan Targets.
4. Select the drives, folders, and files to be scanned.
5. Select or clear the scan boot sectors for all local drives check box, then click OK.
On-Access scanning
On-Access scanning protects your computer from viruses by detecting and treating
viruses that may be dormant on your computer. On-Access scanning is enabled by
default. On-Access scanning supplies the most active form of virus protection. Files are
scanned for viruses as they are moved, opened, executed, or closed, thereby allowing
immediate detection and treatment of viruses. (Note that archive files, such as .zip files,
are scanned only when you open them.)
To enable on-access scanning:

2. In the Protection area, click Advanced Options.
The Advanced Anti-virus Settings dialog appears.
3. Under Advanced Settings, select On-Access Scanning.
4. Select the Enable On-Access Scanning check box, then click OK.

Chapter 6: Spyware and Virus protection E-mail Scanning
E-mail Scanning
E-mail scanning builds on the protection offered by MailSafe, by scanning for viruses in
the body and attachments of e-mail messages and removing them before they can do
damage. Where MailSafe scans for potentially harmful attachments based on file
extension, the E-mail scanning feature scans for harmful files by comparing the
attachments to the signature files of known viruses. If an infected attachment is
detected, the attachment is removed from the e-mail message and replaced with a text
file log that provides details about the removed file. For details about performing an e-
mail scan, see “Anti-virus protection for e-mail,” on page 133. E-mail scanning is on by
default.
To enable or disable E-mail scanning:

1. Select Anti-virus / Anti-spyware|Main, then click Advanced Options.
2. Under Virus Management, select E-mail Scanning.
3. Select or clear the Enable E-mail Scanning check box, then click OK.
Enabling automatic virus treatment

When a virus infection is detected, the Scan Results dialog offers the available treatment
options, such as Quarantine, Repair, or Delete. By default, Zone Labs security software
automatically attempts to treat files that contain viruses. If a file cannot be repaired, the
Scan Results dialog will inform you so that you can take the appropriate action.
To enable automatic virus treatment:

2. Under Virus Management, select Auto Treatment.
3. Select the auto treatment option you want:
# Alert me - do not treat automatically
# Try to repair, and alert me if repair fails
# Try to repair, quarantine if repair fails (recommended)
4. Click OK.
Specifying virus detection methods

There are two primary methods used to scan files for viruses: Heuristic Analysis and
Byte-level scanning. Heuristic Analysis scans files and identifies infections based on a
virus’ characteristic behavior. Heuristic Analysis is enabled by default. Byte-level filter
scans each byte of the file to identify a virus. Byte-level scanning can take considerable

Chapter 6: Spyware and Virus protection Specifying virus detection methods
time to perform. As a consequence, it is only recommended after a major virus attack to

ensure that there are no infections left behind.
Enabling or disabling Heuristic Analysis has no affect on the scanning of e-mail

attachments. Attachments are still scanned using this method. Byte-level
scanning does not support On-Access or E-mail scanning.
To specify a detection method:

2. Under Virus Management, select Detection.
3. Select your preferred detection method(s), then click OK.

Chapter 6: Spyware and Virus protection Customizing spyware protection options
Customizing spyware protection

options
In addition to choosing the type of scan you want to perform, you can specify the
method used to detect spyware, set treatment methods, and view suspected spy sites
that Zone Labs security software has blocked.
Enabling automatic spyware treatment

When spyware is detected, the Scan Results dialog offers the available treatment options,
such as Quarantine, or Delete. The Scan Results dialog will display the suggested
treatment of spyware so that you can take the appropriate action.
To enable automatic virus treatment:

1. Select Anti-virus / Anti-spyware | Main, then click Advanced Options.
2. Under Spyware Management, select Auto Treatment.
3. Select the Enable automatic spyware treatment check box, then click OK.
Specifying spyware detection methods

In addition to default detection that searches your computer’s registry for active
spyware, there are methods to detect latent spyware and hard-to-find spyware.
To specify spyware detection methods:

2. Under Spyware Management, select Detection.
3. Select the Scan for tracking cookies check box.
4. Under Maximum strength detection, select the desired option:
Intelligent quick scan This option is selected by default.
Full system scan Scans the local file system. This option can
slow down scan performance. Select this
option only if you suspect undetected spyware
is present on your computer.
Deep-inspection scan. Scans every byte of data on your computer.
This option can slow down scan performance.
Select this option only if you suspect undetec-
ted spyware is present on your computer.
5. Click OK.
Excluding spyware from scans

Although some spyware programs have the potential to harm your computer or to make
your data vulnerable to hackers, there are many benign applications that still will be

Chapter 6: Spyware and Virus protection Spy Site Blocking
detected as spyware during a scan. If you are using one of these applications, for
example, voice recognition software, you can exclude it from spyware scans by adding it
to the exceptions list. You can add spyware to the exceptions list by right-clicking the
item in the Scan Results list and choosing Ignore Always from the menu.
Once spyware is on the exceptions list, it no longer will be detected during spyware
scans. If spyware was added to the exceptions list accidentally, you can remove it
manually.
To remove spyware from the exceptions list:

2. Under Spyware Management, select Exceptions.
3. In the Spyware Treatment Exceptions area, select the spyware application you want
to remove, then click Remove from List.
4. Click OK.
Spy Site Blocking

Spy Site Blocking prevents you from accessing Web sites suspected of transmitting
spyware. Activated by default, Spy Site Blocking builds up a list of blocked sites, adding
suspected spyware sites as you try to access them. If you attempt to access a suspected
spyware site, Zone Labs security software blocks the site, displays a warning pop-up, and
adds the site to the Blocked Sites list. The warning pop-up includes a link that leads to
the Spy Site Blocking tab, where you can turn the feature on or off, review the Blocked
Sites list, and change permissions for sites in the list. The Blocked Sites list contains only
those sites you have tried to access since last starting Zone Labs security software plus
any sites for which you have set access permission to Allow.
To configure Spy Site Blocking:

1. Select Anti-virus / Anti-spyware | Spy Site Blocking.
2. In the Spy Site Blocking area, select On or Off as desired.
3. If you wish to change access permissions for any sites in the Blocked Sites list, click
on the Access field for the relevant site and choose Allow or Block as appropriate.
Preventing spyware attacks

Spy Site Blocking and the Operating System Firewall (OSFirewall) help to prevent
spyware from installing itself on your computer.
Spy Site Blocking prevents you from accessing Web sites suspected of transmitting
spyware. To see controls for this feature, go to the Spy Site Blocking tab; to read about
the feature, see “Spy Site Blocking,” on page 98.
The Operating System Firewall (OSFirewall) prevents spyware from installing itself on
your computer. For details about OSFirewall, see “Configuring OSFirewall protection,”
on page 68.

Chapter 6: Spyware and Virus protection Performing a virus scan
Performing a virus scan

There are several ways you can initiate a virus scan on your computer.
! You can click Scan for Viruses in the Anti-virus area on the Main tab of the Anti-
virus / Anti-spyware panel.
! You can right-click a file on your computer, then choose Scan with Zone Labs
Anti-virus.
! You can schedule a system scan to run once or at regular intervals.
! You can open a file (if on-access scanning is enabled).
You may run up to five scans simultaneously. Scans are performed in the order in which
they are initiated. System scans provide another level of protection by allowing you to
scan the entire contents of your computer at one time. System scans detect viruses that
may be dormant on your computer’s hard drive, and if run frequently, can ensure that
your anti-virus signature files are up to date.
Because of the thorough nature of full-system scans, they can take a while to perform.
As a result, your system’s performance may be slowed down while a full-system scan is
in progress. To avoid any impact on your workflow, you can schedule system scans to
run at a time when you are least likely to be using your computer.
During scans, Zone Labs security software displays a special system tray icon ( ) and
provides a system tray menu option for viewing scan status. Right-click the system tray
icon and choose View Scan to check on scan status.
Clicking Pause in the Scan dialog while a scan is being performed will stop the
current scan only. On-access scanning will not be disabled. Click Pause again to
resume the current scan.

Chapter 6: Spyware and Virus protection Understanding virus scan results
Understanding virus scan results

Regardless of the method used to initiate the scan, the results of the scan are displayed
in the Scan Results dialog box as shown in the figure below.
Click here to send virus to SmartDefense

Advisor for more information
Figure 6-3: Virus scan results dialog
The Active Items area of the Scan details dialog lists infections found during the scan
that could not be treated automatically. To accept the suggested treatments in the
Treatment column, click Apply. The items listed under Auto Treatment have already
been treated, you do not need to take further action.
Name
The name of the virus that caused the infection.
Treatment
Specifies the treatment applied to the infection. Possible values are Quarantined or
Deleted.
Security Risk
Indicates the risk level of the infection. All viruses are considered High risk.
Path
The location of the virus that caused the infection.

Chapter 6: Spyware and Virus protection Treating virus filesmanually
Type
Specifies whether the infection was caused by a virus, worm, or trojan.
Status
Tells you whether the file has been repaired, deleted, or remains infected. If Zone Labs
security software was unable to treat the item, a What to do next link may appear here.
This link will direct you to further information and instructions.
Information
Provides more detail about the infection. To get more information about a virus or
spyware, click the Learn more link.
Detail
This field remains empty for virus scans. For information about its use in spyware scans,
see “Understanding spyware scan results,” on page 105.
Treating virus filesmanually

If you do not have automatic treatment enabled, or if a file could not be repaired
automatically, you can attempt to treat it manually from the Scan Results dialog.
To treat a file manually:

1. In the Scan Results dialog, select the item you want to treat.
2. In the Treatment column, choose the treatment option you want:
Repair Tries to repair the selected
file.
Delete Deletes the selected file.
Quarantine Appends the extension .zl6 to
the infected file to render it
harmless. The file is placed in
Quarantine.
3. When you have finished treating files, click Close.
If the results of a virus scan contain Error, No treatment available, or Treatment

failed, it means that there is not yet a way to automatically remove the virus
without risking the integrity of your computer or other files. In some cases, there
may be manual treatments available to you. To find out, enter the name of the
virus along with the word “removal” into a search engine, such as Google or
Yahoo, to locate removal instructions. Otherwise, know that we’re constantly
researching viruses and developing safe ways to remove them.
Repairing files in an archive

If the infected file is located in an archive file (such as a .zip file), Zone Labs security
software will not be able to treat it (either by repairing, deleting, or placing it in
Quarantine) while the file is still included in the archive.

Chapter 6: Spyware and Virus protection Submitting viruses and spyware to Zone Labs for re-
To repair a file in an archive:

2. Select On-Access Scanning, then select the Enable On-Access Scanning check
box.
4. Open the file that was specified in the Scan Results dialog from within an archival
utility, such as WinZip.
On-access scanning will scan the file for infections. The Scan Results dialog will
appear with the results of the scan. If the file still cannot be repaired, see “Treating
virus filesmanually,” on page 101.
Submitting viruses and spyware to Zone Labs for review

Reporting and submitting suspected malware to Zone Labs, LLC helps to improve the
security and protection of all Internet users. The Zone Labs Security Team monitors all
incoming submissions for new files. The Zone Labs Security Team will act on your
submission as appropriate and may contact you for more information or to provide
details about the files you submit.
Due to the volume of malware released each day, our researchers cannot respond to
each file you submit. However, we appreciate the assistance of our users and thank you
for taking the time to help secure the Internet. Please address any questions or concerns
to: [email protected]
To submit malware to Zone Labs for review:

1. Place the malware file in a password-protected .zip archive with the password set to
infected.
For help with creating a password protected archive, refer to the Help for WinZip.
2. Send the .zip file to [email protected]
Use this e-mail address only for sending malware to the Zone Labs Security Team.
Please do not send malware files if you feel you cannot do so safely or if it would
increase the risk of infection or damage to your system. Do not e-mail suspected
malware files to others as they could be malicious.
Viewing logged virus events

By default, all Virus events are recorded in the Log Viewer.
To view logged Virus events:


Chapter 6: Spyware and Virus protection Viewing logged virus events
2. Select Virus, from the Alert Type drop-down list.

Table 6-3 provides an explanation of the log viewer fields available for Virus events.
Field Information
Date The date of the infection.
Type The type of event that occurred. Possible

values for this field include:
• Update
• Scan
• Treatment
• E-mail
Virus name The common name of the virus. For example,
iloveyou.exe.
Filename The name of the infected file, the name of
files being scanned, or the name and version
number of update and/or engine.
security software. Possible values include:
• Updated, Update cancelled, Update Failed
• Scanned, Scan cancelled, Scan Failed
• File Repaired, File Repair Failed
• Quarantined, Quarantine Failed
• Deleted, Delete Failed
• Restored, Restore Failed
• Renamed, Rename Failed
Actor Whether the action was manual or auto.
E-mail If the virus was detected in e-mail, the e-
mail address of sender of the infected mes-
sage.
Table 6-3: Virus event log fields

Chapter 6: Spyware and Virus protection Performing a spyware scan
Performing a spyware scan

There are a couple of ways to initiate a spyware scan on your computer.
! You can click Scan for Spyware in the Anti-spyware area on the Main tab of the
Anti-virus / Anti-spyware panel.
! You can schedule a system scan to run once or at regular intervals.
You may run up to five scans simultaneously. Scans are performed in the order in which
they are initiated. System scans provide another level of protection by allowing you to
scan the entire contents of your computer at one time. System scans detect spyware that
may be dormant on your computer’s hard drive, and if run frequently, can ensure that
your anti-spyware signature files are up to date.
Because of the thorough nature of full-system scans, they can take some time to
perform. As a result, your system’s performance may be slowed down while a full-
system scan is in progress. To avoid any impact on your workflow, you can schedule
system scans to run at a time when you are least likely to be using your computer.
During scans, Zone Labs security software displays a special system tray icon ( ) and
provides a system tray menu option for viewing scan status. Right-click the system tray
icon and choose View Scan to check on scan status.
Clicking Pause in the Scan dialog while a scan is being performed will stop the
current scan. Click Pause again to resume the current scan.

Chapter 6: Spyware and Virus protection Understanding spyware scan results
Understanding spyware scan results

The results of a spyware scan are displayed in the Scan Results dialog box as shown in
the figure below.
Choose treatment from drop-down list,

then click Apply.
Figure 6-4: Spyware scan results dialog
The Active Items area of the Scan Results dialog lists infections found during the scan
that could not be treated automatically. To accept the suggested treatments in the
Treatment column, click Apply. The items listed under Auto Treatment have already
been treated, you do not need to take further action.
Name
The spyware name.
Treatment
Specifies the treatment applied to the infection. Possible values are Quarantined or
Deleted.
Security Risk
Indicates the risk level of the infection. Possible values for this column include:
! Low - Adware or other annoying but benign software.

Chapter 6: Spyware and Virus protection Errors in spyware scan results
! Med -Potential privacy breach.

! High - Poses a security threat.
Path
The location of the virus or spyware that caused the infection. You can expand the field
and scroll right to see the complete path.
Type
The category of spyware detected. Possible values for this field include keylogging
software and tracking cookie.
Status
Tells you whether the file has been repaired, deleted, or remains infected. If Zone Labs
security software was unable to treat the item, a What to do next link may appear here.
This link will direct you to further information and instructions.
Information
Provides more detail about the infection. To get more information about a virus or
spyware, click the Learn more link.
Detail
Lists the full paths of all spyware traces (such as registry keys, cookies, and so on).
Advanced users may find this information useful for tracking down spyware programs
that cannot be treated automatically.
Errors in spyware scan results

If the results of a spyware scan contain Error, No treatment available, or Treatment
failed, it means that there is not yet a way to automatically remove the spyware without
risking the integrity of your computer or other files. This is not uncommon, as spyware
writers often employ heavy-handed tactics to keep their spyware on your computer with
no regard to the damage they could cause.
In most cases, there are manual treatments available to you. To find out, enter the name
of the spyware along with the word “removal” into a search engine, such as Google or
Yahoo, and see if you can find removal instructions. Otherwise, know that we’re
constantly researching spyware such as this and developing safe ways to remove it.
Chances are we’ll have a treatment available soon.
Viewing items in quarantine

In some cases, items detected during a virus or spyware scan cannot be treated or
removed automatically. These items are usually placed into quarantine so that they are
rendered harmless but preserved so that they may be treated in the future after an
update to your virus and spyware signature files.
To view viruses in quarantine:

1. Select Anti-virus / Anti-spyware.

Chapter 6: Spyware and Virus protection Viewing logged spyware events
2. Select the Quarantine tab.

3. Choose Viruses from the Quarantined View drop-down list.
4. Optionally, select a virus entry in the list and click Delete (to delete it from your
computer), Restore (to restore it to your computer), or More Info (to consult
SmartDefense Advisor for more information about it).
The virus view in quarantine contains the following columns of information:
Infection
Days in Quarantine
The number of days the virus has been in quarantine.
Path
The location of the virus on your computer.
To view spyware in quarantine:

1. Select Anti-virus / Anti-spyware.
2. Select the Quarantine tab.
3. Choose Spyware from the Quarantined View drop-down list.
4. Optionally, select a spyware entry in the list and click Delete (to delete it from your
computer), Restore (to restore it to your computer), or More Info (to consult
SmartDefense Advisor for more information about it).
The spyware view in quarantine contains the following columns of information:
Type
Name
The name of the spyware that was detected.
Risk
The risk level of the infection. Indicates whether the spyware is benign like adware, or a
serious threat like keylogging software.
Days in Quarantine
The number of days the spyware has been in quarantine.
Viewing logged spyware events

By default, all Spyware events are recorded in the Log Viewer.
To view logged spyware events:


Chapter 6: Spyware and Virus protection Viewing logged spyware events
2. Select Spyware, from the Alert Type drop-down list.

Table 6-3 provides an explanation the log viewer fields available for spyware events.
Field Information
Date The date of the infection.
Type The type of spyware detected. Possible val-

ues for this field include:
• Adware
• Browser Helper Object
• Dialer
• Keylogger
• Screenlogger
• Trojan
• Worm
• Spy Cookie
Spyware name The common name of the spyware. For
example, NavExcel.
Filename The name of the spyware file, for example
gmt.exe.
Action How the spyware was handled by Zone Labs
security software.
Actor Whether the action was performed by you
(manual) or by Zone Labs security software
(auto)
Table 6-4: Spyware event log fields

Chapter 6: Spyware and Virus protection Viewing virus and spyware protection status
Viewing virus and spyware protection

status
There are two places you can view the status of your virus and spyware protection. One
is on the Overview|Status page, and the other is on the Anti-virus / Anti-
spyware|Main tab.
The Main tab of the Anti-virus / Anti-spyware panel displays the status of your virus
and spyware protection. From this area you can:
! Verify that virus and spyware protection is turned on.
! The dates and times of your last scan(s).
! Update definition files.
! Invoke a scan.
! View results of latest scan.
! Access advanced settings.
For information on the status information found on the Overview panel, Chapter
2,“Using the Status tab,” starting on page 16. The section that follows describes the
status information located on the Main tab of the Anti-virus / Anti-spyware panel.

Chapter 6: Spyware and Virus protection Monitoring virus protection
Monitoring virus protection

One of the most important things you can do to protect your computer against viruses
is to install an anti-virus software product. Once installed, however, the anti-virus
software must be kept up to date to ensure protection against new viruses as they are
created.
No matter which anti-virus software product you use, if you find yourself in either of
the following situations, you are putting your computer at risk for virus attack:
! Your trial or subscription period has expired.
! Your virus signature files are out of date.
Anti-virus Monitoring is available in ZoneAlarm, ZoneAlarm Anti-virus, ZoneAlarm
Anti-Spyware, ZoneAlarm Pro, and ZoneAlarm Security Suite.
Anti-virus Monitoring is a secondary defense system that tracks anti-virus software you
have installed on your computer and lets you know when that anti-virus software is out-
of-date or turned off. This secondary alerting system works as a back-up to your anti-
virus software’s built-in warning and update system. Most anti-virus products include
automatic updating, and alert you when your virus definition files become outdated.
Note that not all anti-virus products are supported by this feature.
Monitoring Coverage
Anti-virus Monitoring currently detects anti-virus software from these popular
manufacturers:
! Symantec
! McAfee
! Computer Associates
! Trend Micro
If you use a different anti-virus product, Anti-virus Monitoring will not recognize it at
this time. This does not mean that your ZoneAlarm product is malfunctioning; your
security remains as strong as ever. Zone Labs security software will be adding the ability
to recognize more products over time. If your anti-virus product is not currently
supported, you may simply turn off the Anti-virus Monitoring feature. Do not worry--
Anti-virus Monitoring is monitoring only and has no affect on the firewall and no direct
affect on security.
Monitoring in ZoneAlarm, ZoneAlarm Pro, and ZoneAlarm

Anti-Spyware
In these products, you will see an Anti-virus Monitoring panel. From this panel you can
view the status of your anti-virus product. You can also turn monitoring on or off, or
you can turn on or off just the monitoring alerts.

Chapter 6: Spyware and Virus protection Monitoring in ZoneAlarm Anti-virus and ZoneAlarm
To turn off Monitoring and Monitoring alerts:

1. Select Anti-virus Monitoring|Main.
2. In the Monitoring area, select Off.
3. Clear the check box Notify me of anti-virus security lapses.
Monitoring in ZoneAlarm Anti-virus and ZoneAlarm

Security Suite
In these products, there is no Anti-virus Monitoring panel because the products are
equipped with Zone Labs Anti-virus. Instead, there are monitoring alerts. When Zone
Labs Anti-virus is turned off, the Anti-virus Monitoring feature is activated. Monitoring
can be turned off from any monitoring alert, or from the Advanced Options dialog.
To turn off Monitoring

1. Select Alerts & Logs, then click Advanced.
2. Select the Alerts Events tab.
3. Clear the following check boxes:
# Anti-virus protection not found
# Anti-virus Monitoring events
4. Click OK.
Enabling and disabling Anti-virus Monitoring

If you do not have Zone Labs Anti-virus installed and are using another anti-virus
software product, Anti-virus Monitoring will be enabled by default. In addition, you can
choose to enable Monitoring alerts, which will appear whenever a lapse in protection is
detected.
To enable or disable Anti-virus Monitoring:

1. Select Anti-virus Monitoring|Main.
2. In the Anti-virus Monitoring area, select On.

Chapter 6: Spyware and Virus protection Viewing Status Messages in the Anti-virus Monitoring
Viewing Status Messages in the Anti-virus Monitoring

panel
The Status area of the Anti-virus Monitoring panel displays the current state of your
installed Anti-virus products, as well as the state of Anti-virus Monitoring.
Figure 6-5: Anti-virus Monitoring Status area in ZoneAlarm
Monitoring Anti-virus Product

Zone Labs security software is able to detected most major anti-virus software products.
This area includes a drop-down list that displays the anti-virus software products that
were detected.
Protection
Displays whether your anti-virus products are active and protecting you.
Anti-virus Update
Displays whether your anti-virus products are up to date, or whether your subscription
is current.
Viewing Anti-virus Monitoring alerts

If your anti-virus vendor hasn’t sent you the latest virus definitions, if your anti-virus
product’s notification feature has been disabled, or if you’re running an anti-virus
product that we have not detected (see “Monitoring Coverage,” on page 110) then Anti-
virus Monitoring provides you with a warning as a second line of defense.
When a lapse in protection occurs, you will see a Monitoring alert. This alert appears on
a slight delay to allow your Anti-virus product to alert you first. When the alert does

Chapter 6: Spyware and Virus protection Viewing Anti-virus Monitoring alerts
appear, it will provide information and instructions for making your Anti-virus product
secure.
When running Windows 98, the Anti-virus E-mail scanning feature renames MailSafe to
isafe.exe rather than the name of the computer’s e-mail program.

Spyware and Virus protection Viewing Anti-virus Monitoring alerts

Chapter
E-mail protection
7
Worms, viruses, and other threats often use e-mail to
spread from computer to computer. MailSafe guards your
own computer against e-mail-borne threats, while also pro-
tecting your friends, co-workers, and others in your e-mail
address book.
Topics:
! “Understanding e-mail protection,” on page 116

! “Enabling Inbound MailSafe protection,” on page 117
! “Enabling Outbound MailSafe protection,” on page 117
! “Customizing Inbound MailSafe protection,” on page 118
! “Customizing Outbound MailSafe protection,” on page 121
! “Filtering junk e-mail,” on page 123
! “Anti-virus protection for e-mail,” on page 133
115
Chapter 7: E-mail protection Understanding e-mail protection
Understanding e-mail protection

Attaching files to e-mail messages is a convenient way of exchanging information.
However, it also provides hackers with an easy way of spreading viruses, worms, Trojan
horse programs, and other malware.
The inbound and outbound MailSafe features keep suspect attachments quarantined so
that they can’t infect your computer, and stops worms from mass-mailing themselves to
everyone you know.
Inbound MailSafe protection

Potentially dangerous attachments can be identified by their file name extensions—the
characters that appear after the “dot” in a file name. They identify the file type so that
the appropriate program or system component can open it.
For example:
! .exe (an executable file)
! .js (a JavaScript file)
! .bat (a batch process file)
When an e-mail message with an attachment arrives in your Inbox, MailSafe examines
the attachment’s file name extension and compares it to the extensions on the
attachments list. If the attachment type appears on the list and if attachments of that
type are set to quarantine, Zone Labs security software changes the file name extension
to “.zl*” (where * is a number or letter).
Changing the filename extension quarantines the attachment by keeping it from running
automatically. When you open the e-mail containing the attachment, Zone Labs security
software displays a MailSafe alert to let you know that it has quarantined the attachment.
If you try to open the attachment, an alert warns you of the potential risk involved.
However, you are still able to open the attachment if you are sure that it is safe.
In addition to verifying messages by their file extension, Zone Labs security software
scans incoming attachments for potential viruses. If a virus is found, it is removed from
the message before it can do damage. For more information about Anti-virus protection
and e-mail messages, see “E-mail Scanning,” on page 95.
Inbound MailSafe protection works with any e-mail application that uses POP3 or
IMAP protocols.
Inbound MailSafe protection is designed for local access only. If you have
configured your POP3 client for remote access, inbound MailSafe protection
may not be available.

Chapter 7: E-mail protection Outbound MailSafe protection
Outbound MailSafe protection

Outbound MailSafe protection alerts you if your e-mail program tries to send an
unusually large number of messages, or tries to send a message to an unusually large
number of recipients. This prevents your computer from being used without your
knowledge to send infected attachments to other people. In addition, Outbound
MailSafe protection verifies that the program attempting to send the e-mail has
permission to send e-mail messages.
Outbound MailSafe protection works with any e-mail application that uses SMTP.
The Outbound MailSafe protection feature is only available in ZoneAlarm Anti-virus,
ZoneAlarm Anti-Spyware, ZoneAlarm Pro, and ZoneAlarm Security Suite.
Enabling Inbound MailSafe protection

Inbound MailSafe protection is enabled by default. When enabled, Inbound MailSafe
quarantines attachment types listed on the Attachments tab.
To enable or disable Inbound MailSafe:

1. Select E-mail Protection|Main.
2. Select On or Off.
On MailSafe quarantines attachment types specified in the
attachments tab.
Off MailSafe allows all attachment types.
Enabling Outbound MailSafe protection

For your security, Outbound MailSafe Protection is enabled by default. When
Outbound protection is enabled, Outbound MailSafe settings apply to all programs with
send mail privileges.
To enable or disable Outbound MailSafe Protection

1. Select E-mail Protection|Main.
2. In the Outbound MailSafe Protection area, select On or Off.

Chapter 7: E-mail protection Customizing Inbound MailSafe protection
Customizing Inbound MailSafe

protection
All of the attachment types supported by Inbound MailSafe protection are set to
quarantine by default. You can customize Inbound MailSafe protection by changing
setting of attachment types to Allow, or by adding new attachment types.
The ability to customize Inbound MailSafe protection settings is not available in
ZoneAlarm.
Viewing the Attachments list

Attachment types are listed in alphabetical order. You can sort the list by clicking the
column header. The arrow (^) next to the header name indicates the sort order. Click the
same header again to reverse the sort order.
To access the attachments list:

Select E-mail Protection, then select Attachments.
Figure 7-1: Attachments list
Changing the quarantine setting for an attachment type

Zone Labs security software comes configured with more than 45 attachment types that
are capable of carrying worms or other harmful code. By default, Zone Labs security
software quarantines all of these attachment types. These attachment types are displayed
in the attachments list.

Chapter 7: E-mail protection Adding and removing attachment types
To change the quarantine setting for a specific attachment type:

1. Select E-mail Protection|Attachments.
2. In the Quarantine column, click an extension type.
3. Select Quarantine or Allow, then click Apply.
Adding and removing attachment types

If you want to quarantine attachments of a type that does not appear on the attachments
list, you can add to the list as many unique attachment types as you like.
For your protection, Zone Labs security software prevents you from removing the
default attachment types. However, you can remove any attachment types you may have
added.
To add an attachment type to the list:

2. Click Add.
3. Type a description and filename extension (with or without the “.” character), then
click OK.
To remove an attachment type from the list:

2. In the Extensions column, right-click an attachment type.
3. Select Remove.

Chapter 7: E-mail protection Opening a quarantined attachment
Opening a quarantined attachment

To view the code of the attachment itself, you can open the attachment in Notepad.
For best security, you should never open an e-mail attachment that Zone Labs
security software has quarantined unless the sender is someone you know and
trust, and you have confirmed the sender sent the message intentionally and the
sender is sure that the attachment is harmless.
To open a quarantined attachment:

1. In Windows Explorer, browse to the file you want to open.
2. Double-click the attachment to open it.
3. When you attempt to open an attachment that has been quarantined, Zone Labs
security software warns you of the potential risk in opening the attachment.
.
4. Click Inspect with Notepad.

Chapter 7: E-mail protection Customizing Outbound MailSafe protection
Customizing Outbound MailSafe

protection
By default, an Outbound MailSafe protection alert is displayed when your e-mail
application attempts to send more than five e-mail messages within two seconds, or if an
e-mail message has more than fifty recipients. You can customize these settings to
extend the time interval, increase the number of messages and recipients allowed, or
specify the e-mail addresses that are allowed to send e-mail from your computer.
Enabling Outbound MailSafe protection by program

When Outbound MailSafe protection is set to On, protection is enabled for all
programs that have been granted permission to send e-mail.
You can customize Outbound MailSafe protection by enabling or disabling it for
particular programs.
For information on setting permissions for a program, see “Setting permissions for
specific programs,” on page 76.
To enable or disable Outbound MailSafe protection for a program:

2. In the Programs column, right-click a program name, then select Options.
4. In the Outbound MailSafe Protection area, select the check box labeled Enable
Outbound MailSafe Protection for this program.
To disable Outbound MailSafe protection, clear this check box.
5. Click OK.
Setting Outbound MailSafe protection options

By default, Outbound MailSafe Protection is activated when your computer attempts to
send more than five e-mail messages within two seconds, or an e-mail message with
more than 50 recipients.
Because even legitimate e-mail messages may have one or both of these characteristics,
you may want to customize Outbound MailSafe protection settings to better meet your
individual needs.
To customize Outbound MailSafe protection settings:

1. Select E-mail Protection|Main, then click Advanced.
The Advanced E-mail Protection dialog appears.

Chapter 7: E-mail protection Setting Outbound MailSafe protection options
2. In the Display Outbound MailSafe Protection Alerts When area, choose your
settings.
Too many e- An Outbound MailSafe protection alert appears when your computer
mails are sent attempts to send more than the specified number of e-mails within the
at once specified time interval.
A message has An Outbound MailSafe protection alert appears when your computer
too many attempts to send an e-mail message with more than the specified num-
recipients ber of recipients.
If the sender’s An Outbound MailSafe protection alert appears when your computer
address is not attempts to send an e-mail whose originating address (i.e., the address
in this list in the From: field) does not appear on the list. To prevent Zone Labs
security software from blocking all outgoing e-mail, make sure that your
valid e-mail address appears on this list.
3. Click OK.

Chapter 7: E-mail protection Filtering junk e-mail
Filtering junk e-mail

The Junk E-mail Filter is available in ZoneAlarm Security Suite.
Use the junk e-mail filter to prevent unsolicited junk e-mail (commonly referred to as
spam) from cluttering your Inbox. The Junk E-mail filter supports Microsoft Outlook
and Outlook Express (both referred to in this document simply as “Outlook”).
During installation, Zone Labs security software adds the junk e-mail filter toolbar to
your Outlook e-mail program’s toolbar.
Figure 7-2: The junk e-mail filter toolbar
If you have installed Zone Labs security software but the junk e-mail filter
toolbar does not appear in your Outlook toolbar, right-click in your Outlook
toolbar and choose ZoneAlarmOutlookAddin.
The junk e-mail filter also adds three special folders to your Outlook folder list:
ZoneAlarm Challenged Mail, ZoneAlarm Junk Mail, and ZoneAlarm Fraudulent Mail.
When Zone Labs security software identifies an e-mail message as junk, fraudulent, or
challenged, it puts the message in one of these folders. If you are using Outlook to
access Hotmail, you must use the junk e-mail filter’s spam blocking features and special
folders instead of Hotmail’s.
Allowing or blocking e-mail from specific senders

Each time you send an e-mail to a new person, the junk e-mail filter automatically adds
to the Allowed list, the address in the To field. Messages sent to you from those
addresses will be put in your Inbox.
When you receive an e-mail from a sender on the Blocked list, the junk e-mail filter
automatically moves the message to the Outlook folder named ZoneAlarm Junk Mail.
If an unwanted e-mail arrives in your Outlook Inbox, you can easily add the sender of
that message to your Blocked People list.
To add e-mail addresses to your Allowed or Blocked list:

1. In your Outlook or Outlook Express e-mail program, select an e-mail.
2. In the junk e-mail filter toolbar, click ZoneAlarm Options, then choose Allow
Sender or Block Sender.

Chapter 7: E-mail protection Allowing or blocking e-mail from specific companies
Allowing or blocking e-mail from specific companies

The junk e-mail filter allows you to add all e-mail addresses originating from a particular
company or network domain to your Companies Allowed or Blocked lists.
To add companies to your Allowed or Blocked list:

2. In the junk e-mail filter toolbar, click ZoneAlarm Options, then choose Allow
Sender’s Company or Block Sender’s Company.
The junk e-mail filter adds the domain portion of the sender's address (for example,
example.com) to the list of allowed or blocked addresses.
Adding contacts to the Allowed List

You can scan the default contacts folder in your e-mail program to add contacts to the
list of senders from whom you wish to receive e-mail.
To add contacts to the Allowed List:

1. Open your Outlook or Outlook Express e-mail program.
2. In the junk e-mail filter toolbar, click ZoneAlarm Options, then choose Populate
Allowed List.
Scanning your Inbox

You can scan the contents of your Inbox for fraudulent e-mail and spam. You can use
the Scan Inbox option to scan IMAP, POP3, and Hotmail accounts created in Outlook
Express, and IMAP, POP3 and Exchange server accounts in Outlook.
To scan your Inbox:

1. Open your Outlook or Outlook Express e-mail program.
2. Select the Inbox you want to scan.
3. In the junk e-mail filter toolbar, click ZoneAlarm Options, then choose Scan
selected Inbox.
Allowing e-mail from distribution lists

If you receive or send e-mail to multiple addressees contained in a distribution list, the
junk e-mail filter may block that list name unless it has been added to the Lists tab.
To allow e-mail from mailing lists:

1. Start your Outlook or Outlook Express e-mail program.
2. In the junk e-mail filter toolbar, click ZoneAlarm Options | Configure
Preferences | Lists.
3. Click Add.

Chapter 7: E-mail protection Reporting junk e-mail
4. Type the e-mail address of the distribution list into the text entry area, then click OK.
The junk e-mail filter adds the distribution list’s e-mail address to the list of allowed
addresses.
5. Click Close to save your changes and close the Lists tab.
Reporting junk e-mail

The junk e-mail filter allows you to contribute instances of junk e-mail to the Zone Labs
Collaborative Filter database.
The junk e-mail filter never sends e-mail of any type from your computer without your
permission. When you contribute junk e-mail to the Collaborative Filter database, you
can choose to send either the actual e-mail or a digitally processed (sometimes referred
to as “hashed”) summary of the e-mail that removes all content, headers, and personally
identifiable information from the message. Sending the entire message enables complete
analysis of the contents; sending a digitally processed summary of the message ensures
complete privacy.
MailFrontier, a trusted Zone Labs partner, manages the Collaborative Filter

database for Zone Labs. You can view the full text of MailFrontier’s privacy policy
at: http://www.mailfrontier.com/privacy.html
To report junk e-mail:

2. In the junk e-mail filter toolbar:
# To send the junk e-mail itself, click ZoneAlarm Options, then choose Report
Junk E-mail.
# To send a digitally processed summary of the junk e-mail, click Junk.
3. In the Contribute E-mail dialog box, click OK.
The junk e-mail filter reports the junk e-mail to the Collaborative Filter database and
moves the message to the special Outlook folder ZoneAlarm Junk Mail.
To restore e-mail that was incorrectly identified as junk, select the e-mail in the
ZoneAlarm Junk Mail folder, and click Unjunk. The e-mail will be restored to
your Outlook Inbox.
Reporting fraudulent e-mail

The junk e-mail filter allows you to report instances of fraudulent e-mail (sometimes
referred to as phishing) to Zone Labs. When fraudulent mail is detected for the first
time, a popup appears, asking if you would like to send the fraudulent mail to Zone Labs

Chapter 7: E-mail protection Specifying junk e-mail message options
for analysis. If you choose Yes, all future fraudulent messages will be sent without
prompting you for confirmation. If you choose No, your choice will be reflected in the
Configure Preferences dialog box.
The junk e-mail filter never sends e-mail of any type from your computer without your
permission. When you report fraudulent e-mail, the junk e-mail filter forwards the
complete and original message to Zone Labs.
Zone Labs never divulges your e-mail address, name or other personal information
contained in a fraudulent e-mail except as required to investigate and prosecute the
originator of the fraudulent message.
Zone Labs forwards selected portions of the reported message to government and law
enforcement agencies with jurisdiction over e-mail fraud. These agencies are required by
law to protect the confidentiality of the information contained in the message. Zone
Labs separately informs individuals or institutions threatened by forwarding to them
only the information required to alert them.
To report fraudulent e-mail:

2. In the junk e-mail filter toolbar, click ZoneAlarm Options, then choose Report
Fraudulent E-mail.
3. In the Contribute E-mail dialog box, click OK.
The junk e-mail filter reports the fraudulent e-mail to Zone Labs and moves the
message to the special Outlook folder ZoneAlarm Fraudulent Mail. If you are
using Outlook to access Hotmail, you must use the junk e-mail filter’s spam blocking
features and special folders instead of Hotmail’s.
MailFrontier, a trusted Zone Labs partner, manages the processing of fraudulent

e-mail for Zone Labs. You can view the full text of MailFrontier’s privacy policy
at: http://www.mailfrontier.com/privacy.html
Specifying junk e-mail message options

The junk e-mail filter uses three message filtering techniques: collaborative filter, message
filters, and foreign language filters. Filter settings determine how messages are treated
when received from unknown senders.
Collaborative Filter
Collaborative filtering uses information extracted from junk e-mail reported by you and
other Zone Labs security software users to determine whether new messages received
from unknown users is spam.
Message Filters
Message filters use heuristic rules to analyze e-mail for characteristics common to
various types of junk e-mail.

Chapter 7: E-mail protection Challenging e-mail from unknown senders
Foreign language filters

Foreign language filters block e-mail containing non-european languages. (The junk
e-mail filter automatically manages e-mail in common european languages such as
French, German, or Spanish.)
To customize message filtering options:

2. In the junk e-mail filter toolbar, click ZoneAlarm Options|Configure Preferences
|Messages.
Collaborative Filter In the area, move the slider to adjust the responsiveness to the
characteristics of junk e-mail reported by other Zone Labs security
software users.
Message Filters Move the slider to adjust the responsiveness to common junk e-
mail. You can also adjust the responsiveness to specific categories
of junk e-mail.
Language Filters In the area, click Configure then choose which languages to block.
3. Click Close.
Challenging e-mail from unknown senders

You can choose to have the junk e-mail filter reply to an e-mail from an unknown
sender with a challenge e-mail. Because junk e-mail seldom contains a valid return
address, an unanswered challenge confirms that the e-mail is probably junk.
The challenge e-mail instructs the recipient to click a button in the message to validate
that he or she was the author of the message. Clicking the button directs the junk e-mail

Chapter 7: E-mail protection Challenging e-mail from unknown senders
filter to move the e-mail from the special Outlook folder ZoneAlarm Challenged
Mail folder to your Outlook Inbox.
Figure 7-3: Challenge options tab
For messages from an unknown sender, you can choose whether to always send a
challenge e-mail, to send a challenge only when the incoming message appears to be
junk e-mail, or to never send a challenge. In addition you can customize the challenge
e-mail that is sent to users.
To enable challenge e-mails:


Chapter 7: E-mail protection Specifying your outbound e-mail server

Preferences | Challenges.
3. In the Challenges area, use the slider to choose when to send a challenge e-mail.
High Zone Labs security software will challenge all e-mails that you receive
unless they are known as good to either you (on your allowed lists) or to
MailFrontier (known good senders).
Any e-mail message that is received and can be classified immediately
as junk gets sent directly to the ZoneAlarm Mail folder for later dele-
tion and does NOT get a challenge issued.
Low Zone Labs security software will challenge uncertain e-mail.
Zone Labs security software will only challenge e-mails that it cannot
determine with certainty are spam or are good. This is typically a small
percentage of the e-mail you receive.
Off Challenge e-mails will not be sent.
Zone Labs security software will not send challenge e-mails. Move the
slider up to turn on e-mail challenges to eliminate junk e-mail sent by
spammer computers.
4. To add a personal message to the standard challenge e-mail, click Personalize, type
your name and your personal message, then click OK.
5. Click Close.
The junk e-mail filter moves the message to the ZoneAlarm Challenged Mail.
folder
While waiting for the response to a challenge message, the junk e-mail filter
stores your e-mail address. As soon as the challenge has been completely
processed, the junk e-mail filter discards the address. If you experience
problems sending challenge e-mails, see “Specifying your outbound e-mail
server,” on page 129.
Specifying your outbound e-mail server

To send challenge e-mails, the junk e-mail filter requires the ability to send e-mail. In
most cases the junk e-mail filter uses Outlook’s default outbound mail server. If you
experience problems sending challenge e-mails, you may need to specify the name of
your outbound e-mail server.
To specify the name of an outbound e-mail server:

|Challenges.
3. In the Challenge Content area, click E-mail Server.

Chapter 7: E-mail protection Customizing junk e-mail filter settings
4. Type the name of your outbound e-mail server, then click OK.
5. Click Close.
Customizing junk e-mail filter settings

By default, the junk e-mail filter retains fraudulent e-mail messages in the ZoneAlarm
Fraudulent Mail folder until you manually delete them. You can specify how long e-
mail messages are stored in the ZoneAlarm Junk Mail and ZoneAlarm Challenged
Mail folders, as well as automate fraud e-mail reporting, and configure wireless device
forwarding. In addition, if you could like to scan more than one Outlook Inbox, you can
specify those settings here.
To specify storage duration for junk e-mail:

|Settings.
3. In the Junk Folder Settings area, click Configure.
4. Type the number of days to retain suspected junk e-mail in the ZoneAlarm Junk
Mail and Zone Alarm Challenged Mail folders.
The junk e-mail filter moves e-mail that has been in the folder for the specified
number of days without being validated into Outlook’s Deleted Items folder.
5. Click Close.
To configure a wireless device:

1. Start your Outlook or Outlook Express e-mail program
Preferences | Settings.
3. In the Wireless Device Support area, click Configure.
4. In the Zone Alarm Wireless Support dialog box, type the e-mail address of your
wireless device.
You can also choose to forward only e-mail headers, and to specify the number of
validate messages forwarded to your wireless device in a 24-hour period.
5. If you need to specify a non-default e-mail server, click E-mail Server, type the
name of your outbound e-mail server, then click OK.
Click Close to save your changes and close the Settings tab.
To enable automatic reporting of fraudulent e-mail:


Chapter 7: E-mail protection Restoring e-mail incorrectly identified as junk

3. In the Auto Report Fraud E-mail area, select the Enable auto reporting... check
box.
4. Click Close.
To customize confirmation messages:

3. In the Show Confirmations area, specify the settings you want.
Contribute Junk Email Displays an alert prior to sending junk
e-mail to Zone Labs.
Contribute Fraudulent Email Displays an alert prior to sending
fraudulent e-mail to Zone Labs.
4. Click Close.
To configure multiple Outlook inboxes:

3. In the Outlook Multiple Inbox Support area, select the check box Support
scanning of multiple Inbox in Microsoft Outlook.
This feature is supported for Outlook 2000, 2002 (XP), and 2003 only and is
enabled by default.
Restoring e-mail incorrectly identified as junk

The junk e-mail filter adds three special folders to your Outlook folder list: ZoneAlarm
Challenged Mail, Zone Alarm Junk Mail, and Zone Alarm Fraudulent Mail. When
Zone Alarm security software identifies an e-mail message as junk, fraudulent, or
challenged, it puts the message in one of these special folders.
If you are using Outlook to access Hotmail, you must use the junk e-mail filter’s spam
blocking features and special folders instead of Hotmail’s.
You can restore mail that the junk e-mail filter incorrectly placed in a special folder to
your Outlook Inbox.

E-mail protection Viewing junk e-mail filter reports
To restore e-mail incorrectly identified as junk:

1. In your Outlook or Outlook Express e-mail program, in the ZoneAlarm Challenged
Mail, Zone Alarm Junk Mail, or Zone Alarm Fraudulent Mail folder, choose an
e-mail.
2. In the junk e-mail filter toolbar, click Unjunk.
The junk e-mail filter restores the selected message to your Outlook Inbox.
Viewing junk e-mail filter reports

Use the junk e-mail filter’s Reports tab to view a summary of mail processing activity.
To view junk e-mail filter reports

1. Start your Outlook or Outlook Express e-mail program
2. In the junk e-mail filter toolbar, click ZoneAlarm Options | Configure Preferences |
Reports.
3. Choose one of the four report types:
Junk by Day The total number of legitimate and junk e-mails received by day.
Reasons The reasons the junk e-mail filter blocked incoming e-mails by day
Total History Junk The total number of legitimate and junk e-mails received since
by Day Zone Labs security software was installed.
Total Reasons The total number of reasons the junk e-mail filter blocked incom-
ing e-mails since Zone Labs security software was installed.
4. Click Close to close the Reports tab.

E-mail protection Anti-virus protection for e-mail
Anti-virus protection for e-mail

In addition to the protection offered by MailSafe for incoming e-mail, ZoneAlarm Anti-
virus and ZoneAlarm - Suite offer the additional protection of scanning incoming e-mail
messages for viruses. Unlike MailSafe, E-mail scanning can detect viruses in the body of an
e-mail message, as well as in attachments.
$ Enabling E-mail scanning
$ How e-mail infections are handled
Enabling E-mail scanning

ZoneAlarm Anti-virus and ZoneAlarm Security Suite users have Anti-virus protection for
e-mail enabled by default.
To enable or disable E-mail scanning:

2. In the Protection area, click Advanced Options.
3. Under Virus Management, select E-mail Scanning.
4. Select or clear the Enable E-mail Scanning check box, then click OK.
How e-mail infections are handled

When Zone Labs security software detects an infection in an e-mail attachment, it removes
the infected file and attaches an Infection Report to the e-mail. The Infection report is a text
file that contains information about the attachment that was removed from the e-mail,
including the filename of the infection.
Figure 7-4: Example of an infection report
Infected attachments are renamed with a .zl6 file extension so that they can no longer be
opened.
If you are a Eudora user and you have multiple Infection reports in your inbox,
the name of the infection report may contain a numeral before the .txt extension.

E-mail protection How e-mail infections are handled
When running Windows 98, the E-mail scanning feature renames MailSafe to isafe.exe
rather than the name of the computer’s e-mail program.
For more information about protecting your computer from viruses, see Chapter
6,“Spyware and Virus protection,” starting on page 89.

Chapter
Privacy protection
8
Long ago, the World Wide Web contained nothing but
harmless text-based pages. Today, Web pages frequently
contain elements that can give away private information
about you, interrupt your work with annoying pop-ups, or
even damage your computer. In addition, the files that get
left behind on your computer as you use the Web can slow
down your computer’s performance. Use privacy protection
to guard yourself against the misuse of cookies,
advertisements, and dynamic Web content, and to
periodically rid your computer of unneeded Internet files.
The Privacy feature is available in ZoneAlarm Pro and

ZoneAlarm Pro Security Suite.
Topics:
! “Understanding privacy protection,” on page 136

! “Setting general privacy options,” on page 137
! “Using Privacy Advisor,” on page 139
! “Setting privacy options for specific Web sites,” on page 140
! “Customizing cookie control,” on page 142
! “Customizing ad blocking,” on page 144
! “Customizing mobile code control,” on page 146
! “Understanding Cache cleaner,” on page 147
135
Chapter 8: Privacy protection Understanding privacy protection
Understanding privacy protection

Privacy protection helps you manage Web site elements that are commonly used either
to display advertising content, or to collect data about you and your Web browsing
habits. In addition, privacy settings protect you from the misuse of certain types of
dynamic Web content, or mobile code.
Cookie Control keeps advertisers from spying on your Internet habits, and prevents
sensitive information (passwords, for example) from being stored in cookies where they
can be stolen if a hacker breaks into your computer.
Ad Blocking keeps unwanted advertisements from disrupting your Internet work. With
Zone Labs security software you can block all types of ads (banner ad, animated ad, and so
forth) or only specific types.
Mobile Code Control keeps hackers from using active Web page content such as Java
applets, ActiveX controls controls and plug-ins to compromise your security or damage
your computer. Be aware that many legitimate Web sites use mobile code, and that
enabling mobile code control may affect the functionality of these Web sites.
Cache Cleaner keeps your computer clutter-free by deleting excess files you collect while
you surf the Web and use your computer. It also maintains your privacy by deleting your
URL history and browser cache and other files you specify.
The Privacy feature is available in Zone Alarm Pro and ZoneAlarm Security Suite.

Chapter 8: Privacy protection Setting general privacy options
Setting general privacy options

Privacy protection is enabled for your browser only if you selected it during setup. If you
did not enable privacy during setup, you can enable it manually.
The Privacy group of features that includes the general privacy options is available in
Zone Alarm Pro and ZoneAlarm Security Suite.
Setting privacy protection levels

By setting the privacy protection level, you determine whether to allow or block cookies,
ads, and mobile code.
To set privacy levels:

1. Select Privacy|Main.
2. In the Cookie control area, click the slider and drag it to the desired setting.
High Blocks all cookies except session cookies. This setting may prevent
some Web sites from loading.
Med Blocks persistent cookies and third party cookies from tracking Web
sites. Allows cookies for personalized services.
Off Allows all cookies.
3. In the Ad Blocking area, click the slider and drag it to the desired setting.
High Blocks all ads. Blocks all pop-up/pop-under and animated ads.
Med Blocks all pop-up/pop-under and animated ads. Allows banner ads.
Off Allows all ads.
4. In the Mobile Code Control area, select On or Off.

5. Click OK.
Applying privacy protection to programs other than

browsers
By default, privacy protection is applied only to standard browser programs such as
Internet Explorer. You can also enable privacy protection for any other program on
your computer.
To apply privacy protection control to a program other than a browser:

2. In the Programs column, click a program name, then click Options.

Chapter 8: Privacy protection Applying privacy protection to programs other than
4. In the Filter Options area, select the check box labeled Enable Privacy for this
program.

Chapter 8: Privacy protection Using Privacy Advisor
Using Privacy Advisor

Privacy Advisor is an alert that appears when Zone Labs security software blocks
cookies or mobile code, and enables you to allow those elements for a particular page.
Figure 8-1: Privacy Advisor
The Privacy group of features that includes Privacy Advisor is available in Zone Alarm
Pro and ZoneAlarm Security Suite.To prevent Privacy Advisor from appearing each
time Web page elements are blocked, select the check box labeled Turn Off Privacy
Advisor.
Although the Site Verification is displayed in the same alert window as the
Privacy Advisor, the two are enabled and disabled independently. If you disable
Privacy Advisor, the Site Verification alert will appear on its own and vice versa.
For more information about Site Verification, see “Licensing, registration, and
support,” on page 27.
To enable or disable Privacy Advisor:

2. In the Cookies area, click Custom.
The Custom Privacy Settings dialog box appears.
3. In the Privacy Advisor area, clear the Show Privacy Advisor check box.
4. Click Ok.
To see details or to change privacy settings immediately, click the link labeled
Click here for details. Zone Labs security software opens to the Privacy panel.

Chapter 8: Privacy protection Setting privacy options for specific Web sites
Setting privacy options for specific

Web sites
When you browse the Internet, the sites you visit are added to the privacy site list, where
you can specify custom privacy options for that site. You also can add a site to the list to
customize privacy settings. The Privacy group of features is available in Zone Alarm Pro
and ZoneAlarm Security Suite.
Viewing the privacy site list

The list displays sites you have visited in your current Zone Labs security software
session, and sites for which you have previously customized settings. If you do not
customize settings for a site you’ve visited, it is dropped from the list when you shut
down your computer or shut down Zone Labs security software.
Privacy protection is applied at the domain level, even if a sub-domain appears

in the Site List. For example, if you manually add the sub-domain
news.google.com to the list, privacy protection will be applied to the entire
domain of google.com.
To access the Privacy site list:

Select Privacy|Site List.
Figure 8-2: Privacy site list
A pencil icon in the Edited column indicates that you have customized privacy settings
for that site, and that the site will remain in your list.
Using third-party ad blocking software at the same time as Zone Labs security
software may prevent the privacy site list from being populated properly.

Chapter 8: Privacy protection Adding sites to the privacy site list
Adding sites to the privacy site list

To customize privacy settings for a site that does not appear on the site list, you can add
the site manually, then edit the privacy options for that site.
To add a site to the privacy site list:

1. Select Privacy|Site List.
2. Click Add.
The Add Site dialog appears.
3. In the URL field, enter the URL of the site you want to add, then click OK.
The URL must be a fully qualified host name, for example, www.yahoo.com.
If you are using AOL with ZoneAlarm Pro and have enabled Privacy protection,
the site ie3.proxy.aol.com is added to the Privacy Site List when you visit any
site during an AOL session. For example, if during your AOL session you visit the
site www.cnn.com, only the AOL proxy site, ie3.proxy.aol.com is added to the
Privacy Site List. The privacy settings for the ie3.proxy.aol.com site affect all
sites visited within AOL. If you manually add a site to the site list, the privacy
settings for that site will be ignored, and only the security settings for the AOL
proxy site, ie3.proxy.aol.com, are in effect.
Editing sites on the site list

You can customize the behavior of Cookie Control, Ad Blocking, and Mobile Code
Control by editing the privacy options for sites on the Site List.
1. Select Privacy|Site List.
2. In the Site column, select the site you want to edit, then click Options.
The Site Options dialog appears.
3. Select either the Cookies, Ad Blocking, or Mobile Code tab.
For help with selecting custom options, see “Customizing cookie control,” on
page 142, “Customizing ad blocking,” on page 144, and “Customizing mobile code
control,” on page 146.
4. Specify your options, then click OK.

Chapter 8: Privacy protection Customizing cookie control
Customizing cookie control

Internet cookies make it possible for e-commerce sites (like Amazon, for example) to
recognize you as soon as you arrive and customize the pages you visit. However, cookies
can also be used to record information about your Web browsing habits and give that
information to marketers and advertisers.
By default, Cookie control is disabled and all types of cookies are allowed. You can you
instantly block all cookies by choosing the High cookie-control setting, which gives you
full protection against all types of cookie abuse--but at the expense of the convenience
that cookies make possible.
If you wish, you can instantly block all cookies by choosing the high cookie-control
setting, giving you full protection against all types of cookie abuse—-but at the expense
of the convenience that cookies make possible.
You can customize cookie control by specifying which types of cookies are blocked and
if cookies are allowed, when those cookies should expire.
The Privacy group of features that includes cookie control is available in Zone Alarm
Pro and ZoneAlarm Security Suite.
Blocking session cookies

Session cookies are stored in your browser's memory cache while you browsing a Web
Site and disappear when you close your browser window. Session cookies are the safest
type of cookie because of their short life span.
To block session cookies:

3. In the Session cookies area, select the Block session cookies check box.
4. Click OK.
Blocking persistent cookies

Persistent cookies are placed on your hard disk by Web sites you visit so that they can be
retrieved by the Web site the next time you visit. While useful, they create a vulnerability
by storing information about you, your computer, or your Internet use in a text file.
To block persistent cookies:

3. In the Persistent cookies area, select the Block persistent cookies check box.
4. Click OK.

Chapter 8: Privacy protection Blocking third-party cookies
Blocking third-party cookies

A third-party cookie is a type of persistent cookie that is placed on your computer, not
by the Web site you are visiting, but by an advertiser or other third party. These cookies
are commonly used to deliver information about your Internet activity to that third
party.
To block third-party cookies:

3. In the 3rd Party Cookies area, specify the cookie type(s) you want to block.
Block 3rd party cookies Blocks cookies from third-party Web sites.
Disable web bugs Prevents advertisers from finding out which advertisements
and Web pages you have viewed. Blocked web bugs appear
as blank boxes.
Remove private header Prevents your IP address, your workstation name, login
information name, or other personal information from being transferred
to third-party sources.
Setting an expiration date for cookies

The sites that use persistent cookies may set those cookies to remain active for a few
days, several months, or indefinitely. While a cookie is active, the site (or third party) that
created it can use the cookie to retrieve information. After the cookie expires, it can no
longer be accessed.
If you choose to allow persistent cookies, you can override their expiration dates and
specify how long they will remain active before expiring.
To set an expiration date for cookies:

3. In the Cookie Expiration area, select the Expire cookies check box.
4. Specify when cookies expire.
Immediately after receipt Allows persistent cookies to operate only during
the session in which they were received.
After n days Allows persistent cookies to remain active for the
number of days you specify. You can choose any
number from 1 to 999. The default setting is 1.

Chapter 8: Privacy protection Customizing ad blocking
Customizing ad blocking
Ad blocking is disabled by default. You can customize ad blocking to block all ads or
block only specific types of ads. In addition, you can specify what Zone Labs security
software displays in place of blocked ads.
The Privacy group of features that includes ad blocking is available in Zone Alarm Pro
Specifying which ads to block

Privacy protection allows you to specify which types of ads to block or to allow.
To specify which ads to block:

2. In the Ad Blocking area, click Custom.
The Custom Privacy settings dialog appears.
3. In the Ads to Block area, select the type of ad you want to block.
Banner/sky- Blocks ads that appear in either a horizontal or vertical banner.
scraper ads
Pop-up/pop- Blocks ads that appear in a new browser window in front of or behind
under the window you are viewing.
Animated ads Blocks ads that incorporate moving images.
4. Click OK.
Setting ad void control options

When Zone Labs security software blocks banner, skyscraper, or animated ads, it leaves
a “void” or blank on your screen where the ad was to be displayed. Ad void control lets
you specify what will be displayed in that space.
To specify what appears in place of blocked ads:

2. In the Ad Blocking area, click Custom.
3. In the Ad Void Control area, specify the method for controlling blocked ads.
Nothing Blocks ads without any indication that the ads were to
appear.
A box with the word “[AD]” Displays a window containing the word AD. This is the
default setting.

Chapter 8: Privacy protection Setting ad void control options
A box I can mouse over to get Displays a window containing the ad that appears only
the ad to appear when you activate the window using your mouse.
4. Click OK.

Chapter 8: Privacy protection Customizing mobile code control
Customizing mobile code control

Mobile code is content on a Web page that is active or executable in nature. Examples of
active content include, a Java applet, ActiveX controls, and JavaScript, all of which can be
used to make Web pages more interactive and dynamic.
Malicious mobile code, however, can copy files, clear your a hard disk, steal passwords,
or command servers. Mobile code control keeps hackers from using active content to
compromise your security or damage your computer.
The default setting for mobile code control is Off. When turned to On, all mobile code
except JavaScript is blocked. You can customize your mobile code control settings by
specifying what types of mobile code are blocked when mobile code control is set to
On.
The Privacy group of features that includes mobile code control is available in Zone
Alarm Pro and ZoneAlarm Security Suite.
Specifying which types of mobile code to block

You can customize mobile code control by which types of active content to block and
which to allow.
To customize mobile code control

2. In the Mobile Code Control area, click Custom.
3. In the Mobile Code Control area, specify the types of mobile code to block.
Block JavaScript Blocks JavaScript content, including that required for
common uses such as Back and History links, rollover
images, and opening and closing browser windows.
Block scripts (vbscript, etc.) Blocks scripts that execute automatically, including
those required for displaying banners, pop-up ads, and
dynamic menus.
Block embedded objects (java, Blocks objects embedded in Web pages, including
ActiveX) sound and image files.
Block mime-type integrated Block mime-type integrated objects Blocks objects
objects whose MIME-type indicates that they are applications.
Note: This option also blocks legitimate executable
files sent through the browser, including downloads
that you may want to allow. When this occurs, you'll
see the error “This object has been blocked” in the
browser. For downloads initiated by you, it is safe to
disable the Block mime-type integrated objects fea-
ture.

Chapter 8: Privacy protection Understanding Cache cleaner
Understanding Cache cleaner

Whenever you open a file, view a Web page, or fill out an online form, copies of the
Web pages you view are stored in your browser’s cache, enabling pages to load more
quickly. If you’re working on a shared computer, these files also are available for viewing
by anyone who uses that computer.
Similarly, when you open a file, delete a file, or search for files on your computer, these
actions leave behind an electronic trail designed to help you retrace your steps, should
you need to in the future. Although useful, over time this excess clutter can affect your
computer’s performance and processing efficiency. And, again, if you are using a shared
computer, anyone who uses that computer can find out what Web sites you have
viewed.
Use Zone Labs security software’s Cache Cleaner to periodically rid your computer of
these excess files, free up disk space, and ensure your privacy.
The Privacy group of features that includes cache cleaner is available in Zone Alarm Pro
Using Cache Cleaner

You can run Cache Cleaner manually anytime you want to. If you prefer to schedule
cache cleanings, you can configure Cache Cleaner to run automatically at regular
intervals: as often as every day, to as infrequently as every 99 days. The default value for
automatic cleaning is every 14 days.
To run Cache Cleaner manually:

1. Select Privacy|Cache Cleaner.
2. Click Clean Now.
A verification message appears.
3. Click OK.
You will see a progress meter while Cache Cleaner runs.
To schedule Cache Cleaner to run automatically:

1. Select Privacy|Cache Cleaner.
2. Select the Clean cache automatically every check box.
3. In the Clean Cache Automatically area, specify a cleaning interval between 1 and 99.
The dates of the last cleaning and the next scheduled cleaning is displayed below the
check box.

Chapter 8: Privacy protection Customizing hard drive cleaning options
Customizing hard drive cleaning options

By default, Cache Cleaner cleans the following files from your hard drive:
! Contents of the Recycle Bin
! Contents of the Temp files directory
! Windows Scandisk fragments
You can customize these settings by specifying additional areas to be cleaned, including
your Document history, Search history, or Windows Media Player history.
To customize cleaning options for your hard drive:

1. Select Privacy|Cache Cleaner, then click Custom.
2. Select Hard Drive, then specify cleaning options.
Clean Document history Cleans the list of files that appears at Start|Docu-
ments. This setting only applies to the document
history for the currently logged-in user.
Clean Recycle Bin Cleans the contents of the Windows Recycle Bin.
Selected by default.
Clean temp files directory Cleans the Windows temp directories. Selected by
default.
Clean Windows Find/Search his- Cleans the items in the Windows Find/Search list.
tory
Clean Windows Scandisk frag- Cleans chunks of lost or damaged data recovered by
ments Windows’ ScanDisk program. Selected by default.
Clean Windows Media Player his- Cleans the list of recently played media clips in
tory Windows Media Player.
Run history Cleans the list that appears in the Open drop-down
list at Start|Run.
Customizing browser cleaning options

If you use either Internet Explorer or Netscape, you can configure Cache Cleaner to
remove cookie files that are stored on your computer while you browse the Web. Cache
Cleaner identifies cookies to remove by the cookie source, rather than by the individual
cookie file. When you specify a cookie source to remove, Cache Cleaner removes all
cookies from that source. If there are cookies on your computer that you do not want to
remove, you can configure Cache Cleaner to retain those cookies.
To customize cleaning options for IE/MSN:

2. Select the IE/MSN tab.

Chapter 8: Privacy protection Customizing browser cleaning options
3. In the Internet Explorer/MSN cleaning options area, specify the areas to be cleaned.
Clean cache Cleans the Internet Explorer browser cache.
Selected by default.
Clean URL history Cleans the URLs list in the Address field.
Clean AutoComplete forms Cleans the previous entries you've made for Web
forms, including passwords.
Note: If you do not want your passwords to be
cleaned, clear the “Clean AutoComplete forms”
check box.
Clean AutoComplete passwords Cleans passwords for which you selected “Remem-
ber password.”
Clean locked Index.dat files Cleans index.dat files that are currently in use by
your computer. Selected by default.
Clean typed URL history Cleans the URLs you have typed into the Address
field.
4. To remove cookies, select the Clean IE/MSN cookies check box, then click
Select.
The Select IE/MSN cookies to keep dialog appears. The list on the left shows the
sites for which the browser currently has cookies. The list on the right shows the
sites whose cookies you do not want to clean.
5. To retain a cookie source, select the cookie source, then click Keep.
6. To remove remaining cookies, click Remove, then click OK.
To customize cleaning options for Netscape:

2. Select the Netscape tab.
3. In the Netscape cleaning options area, specify the areas to be cleaned.
Clean cache Cleans the Netscape browser cache. Selected by
default.
Clean URL history Cleans the URLs list in the Location field.
Clean mail trash Cleans the Netscape Mail Trash folder.
Clean forms data Cleans the previous entries you've made for Web
forms.
4. To remove cookies, select the Clean Netscape cookies check box and then click
Select.
The Select Netscape cookies to keep dialog appears. The list on the left shows the
sites for which the browser currently has cookies. The list on the right shows the
sites whose cookies you do not want to clean.

Chapter 8: Privacy protection Customizing browser cleaning options
5. To retain a cookie source, select the cookie source, then click Keep.
6. To remove remaining cookies, click Remove, then click OK.

Chapter
Alerts and Logs
9
Whether you’re the type of person who wants to know ev-
erything that happens on your computer—or you only want
to know that your computer is secure, Zone Labs security
software accommodates you. You can be notified by an
alert each time Zone Labs security software acts to protect
you; or only when an alert is likely to have resulted from
hacker activity. You can also choose to log all alerts, only
high-rated alerts, or alerts caused by specific traffic types.
Topics:
! “Understanding alerts and logs,” on page 152

! “Setting basic alert and log options,” on page 160
! “Controlling the number of alerts,” on page 161
! “Game Mode,” on page 162
! “Setting event and program log options,” on page 164
! “Using SmartDefense Advisor and Hacker ID,” on page 170
151
Chapter 9: Alerts and Logs Understanding alerts and logs
Understanding alerts and logs

Zone Labs security software alert and logging features keep you aware of what’s
happening on your computer without being overly intrusive, and enable you to go back
at any time to investigate past alerts. Expert rule options let you track not only blocked
traffic, but allowed traffic as well, giving advanced users maximum information options
when customizing security rules for their environment.
About Zone Labs security software alerts

Zone Labs security software alerts fall into three basic categories: informational,
program, and network. Additional alerts that may appear based on the version of Zone
Labs security software you are using include ID Lock alerts and OSFirewall alerts.
To learn about the types of alerts that appear and how to respond to them, see
Appendix A,“Alert reference,” starting on page 203.

Chapter 9: Alerts and Logs About Zone Labs security software alerts
Informational alerts
Informational alerts tell you that Zone Labs security software has blocked a
communication that did not fit your security settings. The most common type of
informational alert is the Firewall alert.
The IP address of the computer

that sent the blocked packet, the
protocol that was used, and/or the
port to which the packet was
addressed.
The date and time the alert
occurred.
28th of 74 alerts The number of alerts that

have occurred since the
alert box opened. Use the
arrow controls to view the
alerts.
Click More Info to submit

alert data to SmartDefense.
For quieter security, select this

check box before clicking OK.
Figure 9-1: Firewall alert
Informational alerts don’t require a decision from you. You can close the alert by
clicking OK at the bottom of the alert. By doing this you are not allowing any traffic to
access your computer.
Program alerts
Program alerts ask you if you want to allow a program to access the Internet or local
network, or to act as a server. Program alerts require an Allow or Deny response. The

most common types of Program alerts are the New Program alert and Repeat Program
alert.
The name of the program that

is requesting permission.
The filename of the program

that requested permission, and
the IP address and port num-
ber of the computer that the
program is trying to contact.
When available, this area

displays program advice. If
no advice is available, click
More Info to submit alert
data to SmartDefense Advi-
sor.
Select this check box before clicking

Allow or Deny to avoid seeing an alert for
this program again.
Figure 9-2: New Program alert
By clicking Allow, you grant permission to the program. By clicking Deny, you deny
permission to the program. If SmartDefense Advisor is set to “Auto,” Zone Labs
security software issues Program alerts only if no automatic setting is available. If you
choose Remember this setting in a Program alert when allowing or denying program
access, Zone Labs security software keeps your setting unless SmartDefense Advisor
comes out with a different setting, or until you change the setting manually in the
Programs tab. If you do not choose Remember this setting, Zone Labs security
software will issue another Program alert the next time the program attempts the same
action.

New Network alerts

New Network alerts occur when you connect to any network—be it a wireless home
network, a business LAN, or your ISP’s network.
The type of network (wireless or

other), IP address, and subnet mask
of the detected network.
Type a name of the network here. This

name appears in the Zones tab so that
you can recognize the network later.
Select the Zone in which to place

the new network. Put the network
in the Trusted Zone only if you
know that it is your home or busi-
ness LAN and not your ISP.
Click OK to place the For more help configuring your net-

network in the selected Zone and work, access the Network Configu-
close the alert box. ration Wizard.
Figure 9-3: New Network alert

ID Lock alerts
If they have enabled the ID Lock feature, users of ZoneAlarm Pro and ZoneAlarm
Security Suite may see ID Lock alerts if the personal information stored in myVAULT is
sent to a destination that is not listed on their Trusted Sites list.
The description of the

information being sent.
This area displays the

application trying to send
the information and the IP
address of the computer it’s
being sent to.

alert data to SmartDefense
Select this check box to

add this destination to your
Trusted Sites list.
Figure 9-4: ID Lock alert
By clicking the Yes button, you grant permission to send the information to the
requesting IP address. If you do not want to be alerted the next time myVAULT data is
sent to this destination, select the “Do you want to remember...” check box to add the
destination to your Trusted Sites list.
OSFirewall alerts
There are three types of OSFirewall alerts that you may see: High-rated Suspicious alert,
Medium-rated Suspicious alert, and Malicious alert. These alerts inform you that

ZoneAlarm Security Suite has detected a program on your computer performing an

action that could be harmful to your data or computer.
A description of the
detected behavior.
The filename of the appli-
cation attempting the
behavior.

Advisor.
Select this check box to allow or deny this

action in the future without alerting you.
Figure 9-5: Medium-rated Suspicious Behavior alert
Medium-rated Suspicious Behavior alerts inform you that a trusted program is trying to
perform an action that may change the default behavior of a program. For example, if a
program were to modify your browser’s home page, you would see a Medium-rated
Suspicious Behavior alert. High-rated Suspicious Behavior alerts, in contrast, inform
you that an unknown program is attempting behavior that may cause programs or your
operating system to stop functioning normally, or which could be spyware trying to
monitor your activity. Because even legitimate programs may sometimes need to
perform High-rated Suspicious behavior, you will need to base your decision to allow or
deny the action on your knowledge of the program. If the program is one you use
frequently, and the action seems reasonable given the functionality of the program, it

may be safe to allow it. If you are unsure, click More Info, to submit the program
information to SmartDefense Advisor.
A description of the
detected behavior.
The filename of the appli-

cation attempting the
behavior.
Advisor.
Select this check box to allow or deny this

action in the future without alerting you.
Figure 9-6: High-rated Suspicious Behavior alert
For more information about OSFirewall alerts and the types of behavior detected, see
Appendix D,“Program behavior,” starting on page 251.

Chapter 9: Alerts and Logs About event logging
About event logging

By default, Zone Labs security software creates a log entry every time traffic is blocked,
whether an alert is displayed or not. Log entries record the traffic source and
destination, ports, protocols, and other details. The information is recorded to a text file
named ZALOG.txt, stored in the Internet Logs folder. Every 60 days, the log file is
archived to a dated file so that it doesn’t become too large.
You can choose to prevent specific categories of events from being logged—for
example, you may want to create log entries only for firewall alerts, or suppress entries
for a particular type of Program alert. You can also have Zone Labs security software
log specific types of traffic you have decided to allow, by creating expert rules with
tracking features enabled.

Chapter 9: Alerts and Logs Setting basic alert and log options
Setting basic alert and log options

Basic alert and log options let you specify the type of event for which Zone Labs
security software displays an alert and for which events it creates a log entry.
Setting the alert event level

The Alert Events Shown control, in the Main tab of Alerts & Logs, lets you control the
display of alerts by rating. Program and ID Lock alerts are always displayed, because
they ask you to decide whether to grant permission.
To set the alert event level:

1. Select Alerts & Logs|Main.
2. In the Alert Events Shown area, select the desired setting.
High Displays an alert for every security event that occurs, both high-rated
and medium-rated.
Med Displays only high-rated alerts, which are most likely a result of hacker
activity.
Off Displays Program and ID Lock alerts only. Informational alerts are not
displayed.
Setting event and program logging options

Use the Event Logging and Program Logging areas to choose what types of
informational alerts and program alerts will be logged.
To enable or disable event logging and program logging:

2. In the Event Logging area, select the desired setting.
On Creates a log entry for all events.
Off No events are logged.
3. In the Program Logging area, specify the log level.

High Creates a log entry for all program alerts.
Med. Creates a log entry for high-rated program alerts only.
Off No program events are logged.

Chapter 9: Alerts and Logs Controlling the number of alerts
Controlling the number of alerts

You can specify whether you want to be alerted to all security and program events, or if
you only want to be notified of events that are likely a result of hacker activity.
If you want to suppress most alerts while playing a computer game, see “Game Mode,”
on page 162.
Showing or hiding firewall alerts

The Alert Events tab gives you more detailed control of alert display by allowing you to
specify the types of blocked traffic for which Firewall and Program alerts are displayed.
To show or hide firewall or program alerts:

1. Select Alerts & Logs|Main, then click Advanced.
The Alert & Log Settings dialog appears.
2. Select the Alert Events tab.
3. In the Alert column, select the type of blocked traffic for which Zone Labs security
software should display an alert.
Enabling system tray alerts

When you choose to hide some or all informational alerts, Zone Labs security software
can still keep you aware of those alerts by showing a small alert icon in the system
tray.
To enable system tray alerts:

2. Click Advanced, then click the System Tray Alert tab.
3. Select the Enable system tray alert icon check box.

Chapter 9: Alerts and Logs Game Mode
Game Mode
Game Mode temporarily suppresses most Zone Labs security software scans, product
updates, and alerts, so that you can play games on your computer with fewer
interruptions. Game Mode lets you temporarily allow or deny all program permission
requests, so that Zone Labs security software can answer such requests automatically
without displaying alerts. Automatic scans and product updates are postponed until you
deactivate Game Mode. Game Mode remains active until you turn it off, or until you
turn off Zone Labs security software or your computer.
Game Mode suppresses all Informational alerts and all alerts in which you are prompted
to make a decision. This includes alerts caused by Ask settings in the Programs List,
such as permission alerts triggered by programs trying to send mail or act as servers. It
also includes OSFirewall alerts, which prompt you to allow or deny behavior considered
unusual or suspicious. ID Lock alerts and Outbound Mailsafe alerts are also suppressed.
Game Mode settings do not override Block or Allow settings in your Programs List. If
you have configured Zone Labs security software to always block a specific program, it
continues to block that program even if you activate Game Mode with a setting of
Allow.
The use of Game Mode may reduce the security of your system. If you choose to allow
all permission requests, you may increase the chances of a malicious program harming
your computer or gaining access to your data. If, on the other hand, you choose to deny
all requests, you may interrupt the functions of a legitimate program. You should
therefore activate Game Mode only for the duration of your game.
To turn Game Mode on:

1. Right-click on the system tray icon, and choose Game Mode...
2. In the Activate Game Mode dialog that appears, click one of the following:
Answer all alerts with “allow”—Permission requests will be granted.
Answer all alerts with “deny”—Permission requests will be denied.
3. Leave the Activate Game Mode dialog open or minimize it, but do not close it.
If you close the Activate Game Mode dialog, you turn Game Mode off.
While Game Mode is on, Zone Labs security software displays a special icon in the
system tray ( ).

Chapter 9: Alerts and Logs Game Mode
To turn Game Mode off:

Do one of the following:
• Close the Activate Game Mode dialog by clicking either Cancel or the
Close icon (x) at upper right.
• Click Stop Game Mode in the Activate Game Mode dialog.
• Right-click the system tray icon and choose Stop Game Mode.
Note that Game Mode is automatically deactivated if you turn off your computer or if
you turn off Zone Labs security software.

Chapter 9: Alerts and Logs Setting event and program log options
Setting event and program log options

You can specify whether Zone Labs security software keeps record of security and
program events by enabling or disabling logging for each type of alert.
Formatting log appearance

Use these controls to determine the field separator for your text log files.
To format log entries:

1. Select Alerts & Logs, then click Advanced.
The Advanced Alerts and Log Settings dialog appears.
2. Select the Log Control tab.
3. In the Log Archive Appearance area, select the format to be used for logs.
Tab Select Tab to separate fields with a tab character.
Comma Select Comma to separate fields with a comma.
Semicolon Select Semicolon to separate log fields with a semicolon.
Customizing event logging

By default, Zone Labs security software creates a log entry when a high-rated firewall
event occurs. You can customize Firewall alert logging by suppressing or allowing log
entries for specific security events, such as MailSafe quarantined attachments, Blocked
non-IP packets, or Lock violations.
To create or suppress log entries based on event type:

2. Click Advanced.
The Advanced Alerts and Logs dialog box appears.
3. Select Alert Events.
4. In the Log column, select the type of event for which Zone Labs security software
should create a log entry.
6. Click OK to close the Alert & Log Settings dialog.
Customizing program logging

By default, Zone Labs security software creates a log entry when any type of Program
alert occurs. You can customize Program alert logging by suppressing log entries for
specific Program alert types, such as New Program alerts, Repeat Program alerts, or
Server Program alerts.

Chapter 9: Alerts and Logs Viewing log entries
To create or suppress log entries based on event type:

2. In the Program Logging area, click Custom.
3. In the Program Logs column, select the type of event for which Zone Labs security
software should create a log entry.
5. Click OK to close the Alert & Log Settings dialog.
Viewing log entries

You can view log entries two ways: in a text file using a text editor, or in the Log Viewer.
Although the format of each type of log differs slightly, the general information
contained in the log is the same.
To view the current log in the Log Viewer:

2. Select the number of alerts to display (from 1 to 999) in the alerts list.
You can sort the list by any field by clicking the column header. The arrow (^) next to
the header name indicates the sort order. Click the same header again to reverse the
sort order.
3. Select the type of alert you want to view:
Anti-spyware Displays the Date, Type, Spyware name, Filename, Action, and Actor
columns.
Anti-virus Displays the Date/Time, Type, Virus Name, File Name, Action Taken,
Mode, and E-mail Info columns.
Firewall Displays the Rating, Date/Time, Type, Protocol, Program, Source IP,
Destination IP, Direction, Action Taken, Count, Source DNS, and Des-
tination DNS columns.
IM Security Displays the Date/Time, Type, Source, Program, Local User, Remote
User, and Action columns.
OSFirewall Displays the Rating, Date/Time, Type, Subtype, Data, Program, Direc-
tion, Action Taken, and Count columns.
Program Displays the Rating, Date/Time, Type, Program, Source IP, Destination
IP, Direction, Action Taken, Count, Source DNS, and Destination DNS
columns.
Spy Site Displays the Date/Time and the site that was blocked.
Blocking

Chapter 9: Alerts and Logs Viewing log entries
The Log Viewer shows security events that have been recorded in the Zone Labs
security software log. To view details of Log Viewer fields for each alert type,
refer to the Firewall, Program Control, Anti-virus, and IM Security chapters.
Field Information
Description A description of the event.
Direction The direction of the blocked traffic. “Incom-

ing” means the traffic was sent to your com-
puter. “Outgoing” means the traffic was sent
from your computer.
Type The type of alert: Firewall, Program, ID Lock,
or Lock Enabled.
Source DNS The domain name of the computer that sent
the traffic that caused the alert.
Source IP The IP address of the computer that sent the
traffic that Zone Labs security software
blocked.
Rating Each alert is high-rated or medium-rated.
High-rated alerts are those likely to have
been caused by hacker activity. Medium-
rated alerts are likely to have been caused by
unwanted but harmless network traffic.
Protocol The communications protocol used by the
traffic that caused the alert.
security software.
Destination DNS The domain name of the intended addressee
of the traffic that caused the alert.
Destination IP The address of the computer the blocked
traffic was sent to.
Count The number of times an alert of the same
type, with the same source, destination, and
protocol, occurred during a single session.
Date/Time The date and time the alert occurred.
Program The name of the program attempting to send
or receive data. (Applies only to Program and
ID Lock alerts).
Table 9-6: Log viewer fields

Alerts and Logs Viewing the text log
Viewing the text log

By default, alerts generated by Zone Labs security software are logged in the file,
ZAlog.txt. If you are using Windows95, Windows98 or Windows Me, the file is located in
the following folder: (x):\Windows\Internet Logs. If you are using WindowsNT or
Windows2000, the file is located in the following folder: (x):\Winnt\Internet Logs.
To view the current log as a text file:

2. Click Advanced.
The Advanced Alerts & Log Settings dialog box opens.
In the Log Archive Location area, click View Log.

Alerts and Logs Viewing the text log
Text log fields

Log entries contain some combination of the fields described in the table below.
Field Description Example
Type The type of event recorded. FWIN

Date The date of the alert, in format yyyy/mm/dd 2001/12/31(December
31, 2001)
Time The local time of the alert. This field also dis- 17:48:00 -8:00GMT (5:48
plays the hours difference between local and PM, eight hours earlier
Greenwich Mean Time (GMT). than Greenwich Mean
Time. GMT would be
01:48.)
Virus Name The name of the virus that caused the event. iloveyou
This field only appears for anti-virus events.
File name The name of the file that caused the event. iloveyou.exe
This field only appears for Anti-virus events.
Action How the event was handled. The value for Anti-virus: Renamed
this field will depend on the type of event IM Security: Encrypted
that occurred.
MailSafe: Quarantined
ID Lock: Blocked
Category The ID Lock category of information that was Access PIN

detected in the event. This field only appears
for ID Lock events.
Program The program sending or receiving the e-mail Outlook.exe

that contains the ID Lock information. This
field only appears for ID Lock events.
Source The IP address of the computer that sent the 192.168.1.1:7138

blocked packet, and the port used; OR the Outlook.exe
program on your computer that requested
access permission.
Destination The IP address and port of the computer the 192.168.1.101:0

blocked packet was addressed to.

Alerts and Logs Archiving log entries
Field Description Example
Transport The protocol (packet type) involved. UDP
Archiving log entries

At regular intervals, the contents of ZAlog.txt are archived to a date-stamped file, for
example, ZALog2004.06.04.txt (for June 4, 2004). This prevents ZAlog.txt from
becoming too large.
To view archived log files, use Windows Explorer to browse to the directory where your
logs are stored.
To set archive frequency:

1. Select Alerts & Logs|Main, then click Advanced.
3. Select the Log Archive Frequency check box.
If the Log Archive Frequency check box is not selected, Zone Labs security
software continues to log events for display in the Log Viewer tab, but does not
archive them to the ZAlog.txt file.
4. In the Log Frequency area, specify the log frequency (between 1 and 60 days), then
click Apply.
Specifying the archive location
The ZAlog.txt file and all archived log files are stored in the same directory.
To change the log and archive location:

2. Click Advanced.
The Advanced Alerts & Log Settings dialog box opens.
4. In the Log Archive Location area, click Browse.
Select a location for the log and archive files.

Alerts and Logs Using SmartDefense Advisor and Hacker ID
Using SmartDefense Advisor and

Hacker ID
Zone Labs SmartDefense Advisor is a service that enables you to instantly analyze the
possible causes of an alert, and helps you decide how to respond. When available,
SmartDefense Advisor provides advice as to how to respond to Program alerts. If no
advice is available, click More Info in the alert to receive more information about the
alert. SmartDefense Advisor returns an article that explains the alert and gives you
advice on what, if anything, you need to do to ensure your security.
To determine the physical location and other information about the source IP address
or destination IP address in an alert, click the Hacker ID tab. This tab displays available
information about the IP address that was submitted.
If you are a frequent visitor to eBay, and you have received an ID Lock alert
blocking your eBay password, you can use SmartDefense Advisor to submit a
fraud report to eBay. To learn more about how Zone Labs security software
protects your eBay identity, see “Creating an online fraud protection profile,” on
page 26.
To submit an alert to SmartDefense Advisor:

2. Right-click anywhere in the alert record you want to submit.
3. Select More Info from the shortcut menu.
One or two years of access to updates, support, and services is included with the
purchase of ZoneAlarm Anti-virus, ZoneAlarm Pro, or ZoneAlarm Security Suite;
annual maintenance contract required for subsequent access. Zone Labs
reserves the right to remove the features and services available through
ZoneAlarm at any time.

Chapter
Identity protection
10
With the rise of e-commerce, electronic record keeping,
and mass financial mailings, the incidence of identity theft
has increased in recent years. Hackers can use malware to
intercept your personal information online, while thieves
can steal CDs and laptops containing customer informa-
tion, or they can intercept sensitive mail items (such as
pre-approved credit card offers) that include personal data.
Zone Labs security software helps protect your personal

data online and out in the everyday world. ID Lock keeps
your personal information safe from hackers and identity
thieves. The Zone Labs Identity Protection Center offers re-
sources that help you prevent, detect, and, if necessary, re-
cover from identity theft.
Identity Protection features are only available in

ZoneAlarm Pro and ZoneAlarm Security Suite.
Topics:
! “Understanding the ID Lock feature,” on page 172

! “About myVAULT,” on page 175
! “Using the Trusted Sites list,” on page 178
! “Identity Protection Center,” on page 180
171
Chapter 10: Identity protection Understanding the ID Lock feature
Understanding the ID Lock feature

Every time you or someone else using your computer enters personal information into
an e-mail message or Web form—such as your credit card number, address, or social
security number— it is possible that the information could be stolen. To help prevent
that from happening, the ID Lock ensures that your personal information is only sent to
sites you trust.
The ID Lock feature provides a secure area called myVAULT, where you can store
personal information that you want to protect. The contents of myVAULT are blocked
from being transmitted to unauthorized destinations, whether by you, someone else
using your computer, or by a Trojan horse attempting to transmit your personal
information.
The ID Lock feature is available in ZoneAlarm Pro and ZoneAlarm Security Suite.
How your personal information is protected

Zone Labs security software prevents your personal information from being transmitted
without your authorization, whether in e-mail or on the Web.
E-mail transmission
When you or someone using your computer attempts to send myVAULT data in an e-
mail message, Zone Labs security software displays an alert asking you whether to allow
the information to be sent. If you want to always allow or always block the information
from being sent to this destination, before clicking Yes or No select the check box
labeled “Do you want to remember this answer...” to add the destination to your
Trusted Sites list with the corresponding permission set automatically. For example, if
you were to select the “Do you want to remember this answer...” check box and then
click Yes, the destination would be added to the Trusted Sites list with the permission
set to Allow. Conversely, if you were to click No, the permission would be set to Block.
When responding to an ID Lock alert that is the result of an e-mail transmission,

clicking the “Do you want to remember this answer...” check box adds the
domain of the intended recipient’s e-mail server—not the e-mail recipient—to
the Trusted Sites list. For example, if you were to allow myVAULT data to be
transmitted to your contact [email protected], and you chose to remember that
answer, the next time myVAULT data is sent to ANY contact on example.com’s e-
mail server, the transmission would be allowed and you would not see an alert.
Web transmission
When transmitting myVAULT data on the Web, Zone Labs security software allows or
blocks the transmission according to the permission for the domain in the Trusted Sites
list. As with e-mail transmission of myVAULT contents, if you choose to remember

Chapter 10: Identity protection Setting the ID Lock protection level
your response to an ID Lock alert for a particular Web site, that Web site will be added
to the Trusted Sites list automatically with the permission set accordingly.
IM transmission
When transmitting myVAULT data in an Instant Messaging conversation, Zone Labs
security software prevents the information from being received.
Figure 10-1 shows an instant messaging conversation in which information that is
stored in myVAULT is transmitted. The description of the item stored in myVAULT (in
this example, My Visa Card) appears in brackets.
Figure 10-1: Transmission of myVAULT contents
Figure 10-2 shows how the transmitted information is displayed to the recipient. The
protected information is replaced with asterisks so that it is unreadable.
Figure 10-2: Receipt of myVAULT contents
Setting the ID Lock protection level

The ID Lock is disabled by default. By enabling the ID Lock, you ensure that the data
entered in myVAULT will be protected.
Zone Labs security software keeps track of the number of items stored in myVAULT
and displays the number of times your information was protected.

Chapter 10: Identity protection Setting the ID Lock protection level
To set the ID Lock protection level:

1. Select Identity Protection|Main.
2. In the Identity Lock area, specify the desired protection level.
High Prevents the contents of myVAULT from being sent to unauthorized
destinations. Zone Labs security software will block transmission of
your data silently. If you are using a shared computer, this setting is
recommended for maximum security.
Medium Alerts you when your identity information is about to be sent to desti-
nations not listed on the Trusted Sites list. This is the default setting.
Off Identity protection is disabled. The contents of myVAULT can be sent
to any destination, whether or not it appears on the Trusted Sites list.

Chapter 10: Identity protection About myVAULT
About myVAULT
The myVAULT feature provides a secure area for entering your critical personal data—
data that you want to protect from hackers and identity thieves. When it detects an
attempt to send data stored in myVAULT to a destination, Zone Labs security software
determines whether the information should be blocked or allowed. By default, Zone
Labs security software encrypts myVAULT data as it is entered, storing only the hash
value of the data rather than the data itself. Encrypting the data keeps your information
secure, as data cannot be retrieved using the hash value.
Adding data to myVAULT

While you can store any type of information in myVAULT, it is a good idea only to store
information that you wish to keep secure, such as credit card numbers and identification
information. If you were to store information such as your country of residence (for
example, Canada) in myVAULT separately from the rest of your address, any time you
typed “Canada” into an online Web form, Zone Labs security software would block
transmission of the data.
If you’re unsure of the type of information that should be entered into myVAULT,
refer to the pre-defined categories for guidance. To access the list of categories,
select Identity Protection | myVAULT, then click Add.
To add information to myVAULT:

1. Select Identity Protection|myVAULT.
2. Click Add.
The Add information to myVAULT dialog box will appear.
For maximum protection, Zone Labs security software encrypts myVAULT data by
default. If you do not want to encrypt the data as you enter it, clear the Use one-way
encryption... check box.
3. Type a description of the item you are adding.
Zone Labs security software displays the item description in ID Lock alerts. Be
sure that the description you enter is different from the value of the item to be
protected. If the information to be protected and the description contain some or
all of the data, you may receive multiple ID Lock alerts.
4. Select a category from the drop-down list.

Access PIN Personal access code or other ID number. Maximum of 6
characters. For added security, Access PINs are always
encrypted.
Address Maximum 30 characters.

Chapter 10: Identity protection Adding data to myVAULT
American Express card For added security, Zone Labs security software does not
record the last 5 digits of your American Express card
number.
Bank account Maximum 14 characters.
Credit card For added security, Zone Labs security software does not
record the last 4 digits of your credit card number.
Driver’s license Maximum 15 characters.
eBay password The password you use to access the eBay Web site. Your
eBay password can only be sent to eBay. Maximum 20
characters.
E-mail Address Maximum 60 characters.
International tax ID Maximum 15 characters.
Mother’s maiden name Maximum 30 characters.
Name Maximum 30 characters.
Passport number US passport number or other International ID number.
Maximum 30 characters.
Password Enter the password to be protected. Maximum 20 charac-
ters.
Phone Separators such as parentheses and dashes are not
allowed. Maximum 13 characters.
US Social Security number Requires 9 digits.
Other Use this field to enter items that either do not correspond
to any of the pre-configured categories, or which exceed
the character limit for the corresponding category. Maxi-
mum 30 characters.
5. Type the data to be protected.
Data encryption is enabled by default. If you do not want to encrypt your data,
clear the Use one-way encryption... check box. Because of the sensitive nature of
the data, PIN numbers, passwords, the last four digits of your social security
number, and the last four digits of your credit card numbers will always be
displayed as asterisks, whether or not you choose to encrypt them.
To disable the encryption confirmation that appears by default, select Identity
Protection | myVAULT, then click Options. Clear the Show encryption confirmation
check box.
Asterisks will appear in place of the data you entered and an encrypted form of your
data will be stored in myVAULT. Zone Labs security software will compare the
encrypted data with your outgoing messages.
6. Specify whether you want the information to be protected when using Web, E-mail,
and Instant Messengers (ZoneAlarm Security Suite only).

Chapter 10: Identity protection Editing and removing myVAULT contents
Editing and removing myVAULT contents

In the myVAULT tab you can modify the encryption setting, remove myVAULT
contents, and edit unencrypted data. Because encrypted data is displayed in asterisks, it
is unreadable and therefore cannot be edited.
To edit myVAULT contents:

1. Select Identity Protection|myVAULT.
2. Select the item you want to edit, then click Edit.
The Edit information from myVAULT dialog appears.
3. Modify data as necessary, then click OK to save your changes.
To remove myVAULT contents:

Select the item you want to remove, then click Remove.
If you remove the last item in myVAULT, the ID Lock protection level will be set
to Off. If you later add items to myVAULT, the protection level will be reset to the
default Medium setting.

Chapter 10: Identity protection Using the Trusted Sites list
Using the Trusted Sites list

The myVAULT feature provides a secure area for entering your critical personal data—
data that could be used by hackers and identity thieves. When it detects an attempt to
send data stored in myVAULT to a destination, Zone Labs security software determines
whether the information should be blocked or allowed, by making sure the destination
is one you trust.
There are two kinds of sites that can appear on the Trusted Sites list: Security Alliance
and Custom. Security Alliance sites are sites that Zone Labs, Inc. has authenticated to
ensure they are not fraudulent. Custom sites are sites you add to the list.
Viewing the Trusted Sites list

In addition to listing sites you trust with your personal information, you can add sites to
the list that you explicitly do not want to trust, such as known spam or chat sites, and
prevent information from being sent to them.
The Trusted Sites list also lets you specify which sites are allowed to send your password
as clear text. Because clear-text passwords are unencrypted, they can easily be viewed by
others if intercepted during transmission.
Clear text password

Access Permission Site Type permission
Figure 10-3: Trusted Sites list
Access permission
Specifies whether Zone Labs security software will allow, block, or alert you before
sending myVAULT contents to the listed destinations. To modify the permission for a
site, click beside the site in the Access column and choose Allow, Block, or Ask.
Site
Displays the domain of the site.
Type
Specifies whether the site is a Security Alliance partner or a Custom site.
Clear Text password
Specifies whether Zone Labs security software will allow, block, or alert you before
sending your password as clear text to the listed destinations. To modify the permission

Chapter 10: Identity protection Adding to the Trusted Sites list
for a site, click beside the site in the Clear Text password column and choose Allow,
Block, or Ask.
Site Entry Details
In addition to the site name and type, the Entry Details box displays the site IP Address
and the date and time you last accessed the site.
Adding to the Trusted Sites list

There are two types of sites that appear on the Trusted Sites list: Custom and Security
Alliance. Custom sites are sites that you add to the list. Security Alliance partner sites are
sites that Zone Labs has verified are legitimate and has added automatically.
Custom sites are trusted at the domain level, therefore each sub-domain you want to
trust must be added separately. For example, www.msn.com and shopping.msn.com
would need to be added separately. Security Alliance sites explicitly trust all sub-
domains, so you do not need to create an entry for each sub-domain you want to trust.
To add a site to the Trusted Sites list:

1. Select Identity Protection|Trusted Sites, then click Add.
The Add Trusted Site dialog appears.
2. Type the URL of the site (omit http://www), then click OK.
After you click OK, Zone Labs security software verifies the site address and records
the IP address. This process can take several seconds.
3. Modify the site permissions as desired.
By default, access and clear text password permissions for Custom sites are set to
Ask.
Editing and removing trusted sites

In the Trusted Sites tab, you can modify the access permission for a site, and edit or
remove Custom sites. Although you can modify the permissions for Security Alliance
partner sites, you cannot edit or remove the site entry.
To edit a Custom site:

1. Double-click the site you want to edit.
The Edit trusted site dialog appears.
2. Edit the site as necessary, then click OK to save your changes.
To remove a custom site:

Right-click the site you want to remove, then click Remove.

Chapter 10: Identity protection Identity Protection Center
Identity Protection Center

The ZoneAlarm Identity Protection Center is a Web site that helps you prevent, detect,
and, if necessary, recover from identity theft. (Identity theft is a crime in which someone
exploits your personal information for their own gain.) The Identity Protection Center
includes identity protection tips as well as resources for monitoring the use of your
personal information and for recovering from identity theft.
Access to the Identity Protection Center is available in ZoneAlarm Pro and ZoneAlarm
Security Suite.
To visit the Identity Protection Center:

1. Go to Identity Protection | Main.
2. In the Identity Protection Center area, click Go to ZoneAlarm Identity Protection
Center.

Chapter
Parental Control
11
Parental Control protects your family from Web sites con-
taining violence, pornography, or other undesirable con-
tent. You can choose which categories of Web sites to
block, and use Smart Filtering to instantly categorize and
filter previously un-rated sites.
The Parental Control feature is only available in ZoneAlarm

Security Suite.
Topics:
! “Understanding Parental Control,” on page 182

! “Enabling parental control and smart filtering,” on page 183
! “Choosing which content categories to block,” on page 185
181
Chapter 11: Parental Control Understanding Parental Control
Understanding Parental Control

When your browser is pointed to a Web site or other Web-based content, ZoneAlarm
Security Suite contacts Blue Coat™ Parental Control servers to see how that site or
content has been categorized. If the site your browser is trying to reach has been placed
by Blue Coat ™ in a category you have decided to block, access to the site is denied.
This process normally takes less than a second. A Parental Control Violation page is
displayed, explaining why the site was blocked. If you disagree with a site categorization,
you can request a reevaluation of the site by clicking a link in the Filtering Violation page
that appears when the site is blocked.
The Parental Control feature is only available in ZoneAlarm Security Suite.

Chapter 11: Parental Control Enabling parental control and smart filtering
Enabling parental control and smart filtering

When you enable parental control (Parental Control), you immediately block Web sites
that Blue Coat has determined contain nudity, pornography, information on illegal
drugs, racist text or images, and other content you might not want your children
exposed to. If you enable Smart Filtering, new and nonrated sites will instantly be
categorized and filtered, enhancing your protection.
To prevent your children from changing your Parental Control settings, set a Zone
Labs security software password. See “Setting your password,” on page 22.
Enabling or disabling parental control

Parental Control lets you block sites that are set to Block in the Categories List. If
Parental Control is disabled, Category and Smart Filtering settings are ignored.
To enable or disable parental control:

1. Select Parental Control|Main.
2. In the Parental Control area, select On or Off.
Enabling or disabling Smart Filtering

Smart Filtering (Dynamic Real-Time Rating) lets you block undesirable sites even if they
are brand-new and have not yet been categorized. When this feature is enabled, and
your computer points to uncategorized content, Blue Coat™ instantly analyzes the
content of the Web site and places it in a category. The site is then blocked or allowed
based on your Parental Control settings. This process normally takes two to four
seconds.
To enable or disable Smart Filtering:

1. Select Parental Control|Main.
2. In the Smart Filtering area, select On or Off.
To access this option, Parental Control must be enabled.
Setting timeout options

Timeout options determine how long Zone Labs security software will try to obtain a
rating for a Web site, and what it do if it is unable to obtain one.
To set timeout options:

1. Select Parental Control|Main, then click Advanced.
The Parental Control Options dialog appears.

Chapter 11: Parental Control Setting timeout options
2. Specify your timeout preferences.

Parental Con- The interval, in seconds, for which Zone Labs security software will try
trol timeout to obtain a rating when Smart Filtering is disabled.
(sec)
Timeout when The interval, in seconds, for which Zone Labs security software will try
DRTR enabled to obtain a rating when Smart Filtering is enabled.
(sec)
When rating Specifies whether Zone Labs security software should allow or block
unavailable sites for which a rating is unavailable.
3. Click OK.
If When rating unavailable is set to allow the site, setting the timeout options to
very low numbers might cause undesirable sites to be allowed. We recommend
keeping the default timeout options.

Chapter 11: Parental Control Choosing which content categories to block
Choosing which content categories to

block
Parental Control provides numerous categories for filtering Web content. Table 11-1
below provides a description of each category, along with its default setting.
To change the setting for a category:

1. Select Parental Control|Categories.
2. In the Site Categories to block column, select or clear the check box beside the
category.
A red check mark indicates that content belonging to that category will be blocked.
An empty check box indicates that content belonging to that category will be
allowed.
To block all site categories, click Check All. To allow all site categories, click
Clear All. To revert to default settings, click the Reset to Defaults link.
Default
Category Definition
Setting
Abortion Site which provide information or arguments in Allowed

favor of or against abortion; describes abortion pro-
cedures; offers help in obtaining or avoiding abor-
tion; provides information on the physical, social,
mental, moral, or emotional effects, or the lack
thereof, of abortion.
Adult: Intimate Sites offering pictures of models in lingerie, swim Allowed
Apparel/Swimsuit wear or other types of suggestive clothing. This
does not include sites selling undergarments as a
sub-section of the other products offered.
Adult: Nudity Sites containing nude or semi nude depictions or Blocked
pictures of the human body. These depictions are
not necessarily sexual in intent or effect but may
include sites containing nude paintings or photo
galleries of artistic nature. It also includes nudist
or naturist sites that contain pictures of nude indi-
viduals.
Adult: Pornogra- Sites containing sexually explicit material for the Blocked
phy purpose of arousing a sexual or prurient interest.
Table 11-1: Parental Control categories

Default
Category Definition
Setting
Adult: Sex Edu- Sites that provide information on reproduction, sex- Allowed
cation ual development, sexually transmitted disease,
contraception, safe sex practices, sexuality and
sexual orientation. This does not include sites
offering suggestions or tips on how to have better
sex.
Alcohol/Tobacco Sites that promote or offer for sale alcohol/tobacco Blocked
products or provide the means to create them. Also
may include sites that glorify, tout or otherwise
encourage the consumption of alcohol/tobacco.
Chat Room / Sites that provide chat and Instant Messaging Allowed
Instant Messen- capability.
ger
Criminal Skills / Sites that advocate or give advice on performing Blocked
Illegal Skills / illegal acts such as service theft, evading law
Cheating enforcement, fraud, burglary techniques and pla-
giarism. Sites that provide instructions about or
promote crime, unethical/dishonest behavior or
evasion of prosecution thereof.
Cult / Occult Prominent organized modern religious groups that Allowed
are identified as "cults" by three or more authorita-
tive sources. Sites that promote or offer methods,
means of instruction, or other resources to affect or
influence real events through the use of spells,
curses, magic powers or supernatural beings.
Dating and Per- Sites that promote interpersonal relationships. Allowed
sonals Does not include those pertaining to gay or lesbian
appeal.
Drugs: Illegal Sites that promote, offer, sell, supply, encourage or Blocked
Drugs otherwise advocate the illegal use, cultivation,
manufacture, or distribution of drugs, pharmaceu-
ticals, intoxicating plants or chemicals and their
related paraphernalia.
E-mail Sites offering Web-based E-mail services. Allowed
Freeware / Soft- Sites that promote or offer free software or prod- Allowed
ware Downloads ucts for general download or trial purposes.
Gambling Sites where a user can place a bet or participate in Blocked
a betting pool (including lotteries) online; obtain
information, assistance or recommendations for
placing a bet; receive instructions, assistance or
training on participating in games of chance. Does
not include sites that sell gambling related prod-
ucts or machines.

Default
Category Definition
Setting
Gay and Lesbian Sites that provide information on or cater to gay Allowed
and lesbian lifestyles. Does not include sites that
are sexually oriented.
Glamour / Life- Sites that emphasize or provide information or Allowed
style news on how the user can achieve physical attrac-
tiveness, allure, charm, beauty, or style with
respect to personal appearance.
Government: Mil- Sites that promote or provide information on mili- Allowed
itary tary branches or armed services.
Hacking / Proxy Sites providing information on illegal or question- Blocked
Avoidance Sys- able access to or the use of communications equip-
tems ment/software, or provide information on how to
bypass proxy server features or gain access to URLs
in any way that bypasses the proxy server.
Humor / Jokes Sites that primarily focus on comedy, jokes, fun, Allowed
etc. Does not include sites containing jokes of
adult or mature nature.
Internet Auctions Sites that support the offering and purchasing of Allowed
goods between individuals.
MP3 / Streaming Sites that support and or allow users to download Allowed
music and media files such as MP3, MPG, MOV,
etc. Also includes sites that provide streaming
media (radio, movie, TV).
News Groups Sites that offer access to Usenet New Groups or Allowed
other like sites.
News and Media Sites that primarily report, information, or com- Allowed
ments, on current events or contemporary issues of
the day. Items like weather, editorials, and human
interest are considered target within the context of
major news sites.
Online Games Sites that provide information and support game Allowed
playing or downloading, video games, computer
games, electronic games, tips and advice on games
or how to obtain cheat codes, journals and maga-
zines dedicated to game playing, online games, as
well as sites that support or host online games
including sweepstakes and giveaways.
Pay to Surf Sites Sites that pay users money for clicking on specific Blocked
links or locations.

Default
Category Definition
Setting
Political /Activist Sites that are sponsored by and contain informa- Allowed
/ Advocacy tion about specific political parties or groups. Sites
that are sponsored by or devoted to organizations
that promote change or reform in public policy,
public opinion, social practice, economic activities
and relationships. Excludes commercially spon-
sored sites dedicated to electoral politics or legisla-
tion.
Religion Sites that promote and provide information on Allowed
Buddhism, Baha'I, Christianity, Christian Science,
Hinduism, Islam, Judaism, Mormonism, Shinto,
Sikhism, Atheism, other conventional or unconven-
tional religious or quasi-religious subjects, as well
as churches, synagogues, other houses of worship,
any faith or religious beliefs including “alternative”
religions such as Wicca and witchcraft.
Search Engines / Sites that support searching the Web, indices and Allowed
Portals directories.
Shopping Sites that provide the means to obtain products Allowed
and services that satisfy human wants and or
needs. This does not include products or services
that are principally marketed to satisfy industrial or
commercial needs.
Sports / Recre- Sites that promote or provide information about Allowed
ation / Hobbies spectator sports.
Violence / Hate / Sites which advocate or provide instructions for Blocked
Racism causing physical harm to people or property
through use of weapons, explosives, pranks, or
other types of violence. Sites that advocate hostility
or aggression toward an individual or group on the
basis of race, religion, gender, nationality, ethnic
origin, or other involuntary characteristics; a site
which denigrates others on the basis of those char-
acteristics or justifies inequality on the basis of
those characteristics; a site which purports to use
scientific or other commonly accredited methods to
justify said aggression, hostility or denigration.
Weapons Sites that sell, review, or describe weapons such as Blocked
guns, knives, or martial arts devices, or provide
information on their use, accessories, or other
modifications.
Web Communica- Sites that allow or offer Web based communication Allowed
tion / Message using any of the following mediums: E-mail (Web
Boards based), Chat, Instant Messaging, Message Boards,
etc.

Default
Category Definition
Setting
Web Hosting / Sites of organizations that provide top-level domain Allowed

Personal Web pages of Web communities or hosting services.
Pages Sites that host Web Chat services, on-IRC chat
rooms, Chat sites via HTTP, home pages devoted to
IRC, as well as sites that offer forums or discussion
groups. Sites that promote or provide the means to
practice illegal or unauthorized acts using com-
puter-programming skills (hacking).
Also sites containing ALL types of content such as
GEO Cities.
If you are using ZoneAlarm Security Suite and you choose to block new
categories, you may want to clean your browser cache to remove pages from
newly blocked sites that may be stored there. Otherwise, anyone using your
computer will have access to blocked content that has been stored in your
browser’s cache.

Parental Control Choosing which content categories to block

Chapter
Instant Messaging Security
12
Zone Labs IM Security is your front line of defense against
instant messaging threats. IM Security’s default security
levels give you immediate protection against hackers,
spam, and provides controls that prevent inappropriate
Web content from being sent to your instant messaging cli-
ent.
The IM Security feature is only available in ZoneAlarm Se-

curity Suite.
Topics:
! “IM Security Overview,” on page 192

! “Setting IM Security options,” on page 199
191
Chapter 12: Instant Messaging Security IM Security Overview
IM Security Overview
Zone Labs security software provides comprehensive instant messaging (IM) security
for the most popular instant messaging services, including MSN Messenger, Yahoo!
Messenger, AOL Instant Messenger, and ICQ. IM Security also supports third-party
programs that run on these services, such as Trillian. IM Security keeps instant
messaging conversations private and protects computers from IM spammers, identity
thieves, hackers and predators who exploit vulnerable IM connections.
IM Security includes the following features:
! Access Control - Controls which IM services can be accessed using your computer.
! Spam Blocker- Blocks messages sent by people not on your contact lists.
! Feature Control - Determines which IM features are allowed on your computer.
! Inbound threat protection - Guards your computer against attacks by filtering
invalid messages, dangerous scripts, and executable URLs.
! Message Encryption - Protects your IM traffic from being intercepted and read by
others.
The protection features described above apply only to one-on-one conversations.

Zone Labs security software does not protect conversations with more than one
participant (for example, chat room conversations).
Access
Access control lets you allow or block traffic for a particular instant messaging service.
To block or allow IM traffic for a particular service:

1. Select Security|Settings.
2. In the Access column, click beside the instant messaging for which you want to
block or allow traffic.
3. Select Allow or Block.
Blocking spam
Spam Blocker filters out unsolicited communications from senders who are not on your
contact list. By default, Spam Blocker is enabled only when the IM Security level is set to

Chapter 12: Instant Messaging Security Blocking spam
High. However, you can customize your settings to enable Spam Blocker for a particular
service regardless of the protection level.
You will not see visual confirmation that Zone Labs security software blocked an
incoming message, however, you can refer to the log to determine the sender’s
identity. If you want to receive future messages from the sender, be sure to add
the sender’s ID to the contact list for each of your instant messaging programs.
Blocked messages appear in the Log Viewer with “A message from someone not
on your contact list was blocked” in the Type column.
To enable or disable Spam Blocker for a particular service:

2. Locate the instant messaging service you want to customize, then click in the Spam
Blocker column.
3. Choose On or Off.

Chapter 12: Instant Messaging Security Feature Control
Feature Control
Feature Control settings allow you to restrict the types of media that you can receive
during an instant messaging session. Because inappropriate content can be sent in many
forms, Zone Labs security software allows parents to protect their children by blocking
specific types of media from instant messaging sessions, including audio, video, and
voice transmissions.
When a message is blocked, the sender is notified, as shown in Figure 12-1.
Figure 12-1: Sending a voice transmission that is blocked
The recipient is also notified as shown in Figure 12-2.
Figure 12-2: Blocking an incoming voice transmission
To customize Feature Control settings:

2. Locate the instant messaging service you want to customize, then click in the
Feature Controls column.
3. Click in the Audio, Video, or Files, then choose Allow or Block.
Inbound protection
Inbound protection settings let you specify which instant messaging services are allowed
to transmit active links and formatting tags, such as JavaScript, in incoming messages.

Chapter 12: Instant Messaging Security Inbound protection
Active links and formatting tags can contain viruses that can attack your computer when
you click on a link in a message.
The Inbound “Tags” setting removes extra formatting that could contain scripts and
other potentially harmful code. The Tags setting also removes innocuous formatting,
such as bold, underline, italic, etc.
The “Active” setting blocks links that, if clicked, could execute code or download
dangerous files onto your computer.
When you send an active link to a contact, it appears as shown in Figure 12-3.
Figure 12-3: Sending an executable URL to a contact
When an active link is filtered from a message, the receiver is notified as shown in
Figure 12-4 shows.
Figure 12-4: Potentially harmful link removed

Chapter 12: Instant Messaging Security Encrypting instant messaging traffic
To customize inbound protection settings:

2. Locate the instant messaging service you want to customize, then click in the
Inbound column.
3. Click below Tags or Active, then choose Allow or Block.
Encrypting instant messaging traffic

Encryption keeps others from intercepting and reading your instant message
conversations. To encrypt instant messaging conversations, both parties must have
ZoneAlarm Security Suite installed, have an account on the same IM service.
Conversations will not be encrypted if the parties are not on each other’s contact list,
even if each has ZoneAlarm Security Suite installed.
When you initiate a conversation with another ZoneAlarm Security Suite user, and you
both have encryption enabled for the IM service you’re connected to, the word
encryption appears in brackets after your contact’s instant messaging ID. If you initiate
a conversation with a contact who is not using ZoneAlarm Security Suite, or who does

not have encryption enabled, you will see the word unencrypted after the contact’s
instant messaging ID.
Figure 12-5 shows an encrypted conversation.
Figure 12-5: Example of an encrypted conversation.
Here is the same conversation as shown in Figure 12-5, but in unencrypted mode.
Figure 12-6: Example of an unencrypted conversation
To enable or disable encryption for a particular IM service:

2. In the Encrypt column, click beside the service whose traffic you want to encrypt.
3. Select Allow or Block.
How instant messages are encrypted
ZoneAlarm Security Suite relies on the OpenSSL library for cryptographic services. The
text of each message in a secure session is encrypted with a 168-bit key cipher.

ZoneAlarm Security Suite automatically and transparently creates a self-signed certificate

for each of the user’s IM accounts upon the first login. At the beginning of the first IM
conversation between two ZoneAlarm Security Suite users after installing ZoneAlarm
Security Suite, the certificates are transparently exchanged between the users and stored
on their computers. The public key from one of the certificates is used to encrypt the
session key to be used for the duration of the session.

Chapter 12: Instant Messaging Security Setting IM Security options
Setting IM Security options

Zone Labs security software protects you by applying restrictions to instant messaging
software, filtering spam, and encrypting Instant Message traffic. In combination with
the ID Lock feature, Zone Labs security software prevents your personal data from
being transmitted during an instant messaging session without your authorization. You
can specify your desired level of protection by using pre-defined options, or by manually
customizing individual security settings.
$ Setting the protection level
$ Viewing IM Security protection status
$ Customizing protection settings
$ Setting advanced IM Security options
$ Viewing logged IM Security events
Setting the protection level

The default Medium protection level balances security with convenience by allowing
instant messaging functions, while ensuring that your instant messaging
communications are secure.
To set the global protection level:

1. Select IM Security|Main.
2. In the Protection Level area, click the slider and drag it to the desired setting.
High Prevents your instant messaging programs from sending media files of
all types, filters spam messages, executable URLs, and encrypts
instant messaging traffic.
Medium This is the default setting. Encrypts instant messaging traffic and fil-
ters executable URLs.
Off Instant messaging protection disabled.
Viewing IM Security protection status

You can view the status of IM Security protection from the Main tab. The Protection
status area provides statistics for the number of messages that were blocked that
violated the security settings for Inbound, Spam Blocker, and Feature Control options.
The Program History log lists all active IM programs and displays the last date and time
the programs were used.
If you start an IM program before starting Zone Labs security software, the IM
program will not appear in the History log. To accurately reflect all IM program
activity, start IM programs after starting Zone Labs security software.

Chapter 12: Instant Messaging Security Customizing protection settings
Customizing protection settings

By setting the protection level to High, Med, or Off, you specify globally whether
instant messaging programs can send files, JavaScript, and links to your instant
messaging client. In some cases, you may want to specify settings for an individual
service that are different than these global settings allow.
To customize protection settings:

1. Select IM Security|Settings.
2. Locate the service you want to modify, then right-click in the column for the content
you want to customize.
Access If set to Block, instant messaging traffic from any program that uses
the selected service, is stopped.
Spam Blocker If set to On, blocks messages from messages sent from people who
are not in your contact list.
Feature Control If set to Block, transmission of Audio, Video, or Files is allowed
blocked.
Inbound Specifies whether formatting tags, such as JavaScript or executable
links, can be contained in inbound messages.
Encrypt Specifies whether instant messaging traffic is encrypted.
To return to the default Medium protection level, select IM Security|Main, then

click Reset to Defaults.
Setting advanced IM Security options

By default, Zone Labs security software alerts you when harmful content is filtered
from an IM conversation, and tells you whether or not your sessions are encrypted.
Using the Advanced dialog, you can modify these and other settings.
To set advanced IM Security options:

1. Select IM Security|Settings, then click Advanced.
2. Specify your settings.
Notify my contacts that I am protected by
When you initiate a conversation with a
Zone Labs IM Security
contact after installing Zone Labs secu-
rity software, your contact will receive
notification that you are protected.
Note: This notification occurs only during
the first session after installation. Your
contacts will not be notified during sub-
sequent sessions.

Chapter 12: Instant Messaging Security Viewing logged IM Security events
Notify me about encryption status of each IM Zone Labs security software marks the
session beginning of each IM session with the
default “encrypted” or “unencrypted”
label.
Label encrypted messages with Attaches the specified label to encrypted
incoming messages. The default label is
“encrypted.”
Label unencrypted messages with Attaches the specified label to unen-
crypted incoming messages. The default
label is “unencrypted.”
Notify me when harmful content is filtered Zone Labs security software will display a
message in your IM window when poten-
tially harmful content is filtered from an
IM conversation.
Block IRC In the event your computer becomes
compromised, this feature blocks
attempts to establish a connection with
IRC channels. This prevents infected
computers from establishing malicious
connections.
If you are an IRC user and require use of
IRC applications, clear this option.
Block all links Filters all URLs, which can be used to
spread worms.
Viewing logged IM Security events

By default, all IM Security events are recorded in the Log Viewer. Although you will not
receive notification when Zone Labs security software blocks Spam, you will be able to
view the details of any blocked message in the Log viewer.
To view logged IM Security events:


Instant Messaging Security Viewing logged IM Security events
2. Select IM Security, from the Alert Type drop-down list.

Table 12-6 provides an explanation the log viewer fields available for IM Security.
Field Explanation
Rating Event rating based on the Protection Level of

the security option.
Date/Time Date and time the event occurred
Type Brief description of the event. Depending
upon the security settings that were violated
(for example, Spam Blocker, ID Lock, etc.),
this field may contain any of the following
descriptions:
• Connection blocked
• A message from someone not on your
contact list was blocked
• Media transmissions
• Potentially harmful content removed
• A link to active content removed
• Encrypted session established
• Session not encrypted
• Sensitive data removed
Service The service on which the event occurred.
Program The instant messaging program (displayed as
the application file) that was connected
when the event occurred.
Local user The user ID of the instant messaging contact
who received the message.
Remote user The user ID of the instant messaging contact
who triggered the event.
Action Describes the action taken. Common values
for this column are encrypted, encryption
deactivated, blocked audio/video/file,
blocked script.
Table 12-6: Log Viewer field explanations

Appendix
Alert reference
A
This chapter provides detailed information about the vari-
ous types of alerts you may see while using Zone Labs se-
curity software. Use this chapter to find out why alerts
happen, what they mean, and what to do about them.
Throughout this chapter, there are tips for reducing the

number of alerts Zone Labs security software displays. For
information about suppressing most alerts while playing
games on your computer, see “Game Mode,” on page 162.
Topics:
! “Informational alerts,” on page 204

! “Program alerts,” on page 209
! “OSFirewall alerts,” on page 218
! “ID Lock alert,” on page 220
! “New Network alert,” on page 221
! “Instant Messaging alerts,” on page 223
203
Appendix A: Alert reference Informational alerts
Informational alerts
Informational alerts tell you that Zone Labs security software has blocked a
communication that did not fit your security settings. They do not require a decision
from you.
Firewall alerts/Protected
Firewall alerts are the most common type of informational alert. Firewall alerts inform
you that the Zone Labs security software firewall has blocked traffic based on port and
protocol restrictions or other firewall rules.
Why these alerts occur
Firewall alerts with a red band at the top indicate high-rated alerts. High-rated alerts
often occur as a result of hacker activity.
Firewall alerts with an orange band at the top indicate medium-rated alerts. Medium-
rated alerts are likely the result of harmless network traffic, for example, if your ISP is
using ping to verify that you’re still connected. However, they also can be caused by a
hacker trying to find unprotected ports on your computer.
What you should do
If you’re on a home or business network, and your Trusted Zone security is set to High,
normal LAN traffic such as NetBIOS broadcasts may generate firewall alerts. Try
lowering Trusted Zone security to Med.
By default, Zone Labs security software only displays high-rated firewall alerts. If your
defaults have been changed, you may see a lot of medium-rated alerts. Try setting your
alert display settings to medium.
If you are receiving a large number of firewall alerts, and you are working on a home
network or business LAN, it is possible that normal network communications are being
blocked. If this is happening, you can eliminate the alerts by placing your network in the
Trusted Zone.
How to see fewer of these alerts
Repeated alerts may indicate that a resource you want to trust is trying repeatedly to
contact you. If you are receiving a lot of firewall alerts, but you don’t suspect you’re
under attack, try the following troubleshooting steps:
! Determine if the source of the alerts should be trusted.
# Submit repeated alerts to SmartDefense Advisor to determine the source IP
address that caused the alerts.
# If the alerts were caused by a source you want to trust, add it to the Trusted Zone.
! Determine if your Internet Service Provider is sending you “heartbeat” messages.
# Try the procedures suggested for managing ISP heartbeat. See “Allowing ISP
Heartbeat messages,” on page 239.

Appendix A: Alert reference MailSafe alert
MailSafe alert
MailSafe alerts let you know that Zone Labs security software has quarantined a
potentially dangerous attachment to an incoming e-mail message. By clicking OK,
you’re not letting anything into your computer.
MailSafe alerts can occur due to violations of Inbound or Outbound MailSafe
protection settings. For example, an Inbound violation occurs when you open an e-mail
that has an attachment whose filename extension is on the list of extensions to be
quarantined in the Attachments tab of the E-mail Protection panel. In such a case, the
alert informs you that Zone Labs security software has changed the extension to
prevent the attachment from being opened without warning. A violation of Outbound
MailSafe protection settings, such as an e-mail that has too many recipients, or too many
e-mails within a short time, can cause a MailSafe alert to occur.
What you should do
How you respond to MailSafe alerts depends upon whether the alert was caused by a
violation of Inbound or Outbound MailSafe protection settings.
If the alert was caused by an Inbound MailSafe violation, do the following:
! Examine the e-mail message carefully. Are you sure it’s from someone you know and
trust? Remember, hackers can fake e-mail messages so that they look like they are
from a friend. Also, if a friend has accidentally opened a file containing an e-mail
worm, that worm may have sent itself to you, using your friend’s e-mail program.
! Contact the sender by telephone or e-mail before opening the attachment to make
sure the message is genuine.
! Open the attachment only if you are certain the attachment is harmless. You can
open the attachment by clicking the quarantine icon (which replaces the normal file
icon).
When you try to open a quarantined attachment, Zone Labs security software will
display a warning dialog box to remind you that the attachment is potentially
dangerous.

Appendix A: Alert reference Blocked Program alert
If the alert was caused by an Outbound MailSafe violation, do the following:

! Examine the alert carefully. Does the activity noted describe actions you were
recently performing? If so, you may want to modify your Outbound MailSafe settings
to better accommodate your needs. See “Outbound MailSafe protection,” on
page 117. If not, the alert may be the result of a virus on your computer. In this case
deny the outbound e-mails, then scan your computer with an anti-virus program.
! Verify that your e-mail address is listed on the approved sender’s list. If you selected
the if the sender’s e-mail is not in this list option, and if your e-mail either is not
on that list or is misspelled, add your valid e-mail address to the list.
Outbound MailSafe Protection is an important part of your Internet security system,
and we recommend leaving it on. However, if you are getting a lot of these messages in
error, you may want to adjust the sensitivity of the feature or turn it off. See “Outbound
MailSafe protection,” on page 117.
Blocked Program alert

Blocked Program alerts tell you that Zone Labs security software has prevented an
application on your computer from accessing the Internet or Trusted Zone resources.
By clicking OK, you’re not allowing the program access, just acknowledging that you
saw the alert.
Blocked Program alerts occur when a program tries to access the Internet or the
Trusted Zone, even though you have explicitly denied it permission to do so.
What you should do
If the program that was blocked is one that you want to have access to the Internet
Zone or Trusted Zone, use the Programs tab to give the program access permission.

Appendix A: Alert reference Internet Lock alert

To turn off Blocked Program alerts, do either of the following:
! When you see a Blocked Program alert, select Do not show this dialog again
before clicking OK. From then on, all Blocked Program alerts will be hidden. Note
that this will not affect New Program, Repeat Program, or Server Program alerts.
! In the Program Control panel, click Advanced to access the Alerts & Functionality
tab, then clear the check box labeled Show alert when Internet access is denied.
Turning off Blocked Program alerts does not affect your level of security.
Internet Lock alert

Internet Lock alerts let you know that Zone Labs security software has blocked
incoming or outgoing traffic because the Internet Lock (or the Stop button) is engaged.
By clicking OK, you’re not opening the lock; you’re just acknowledging that you’ve seen
the alert.
If the Internet Lock has been engaged automatically (or accidentally), open it to prevent
further alerts. See “Understanding Zones,” on page 18.
These alerts occur only when the Internet Lock is engaged.
What you should do
Click OK to close the alert pop-up.
If the Internet Lock has been engaged automatically (or accidentally), open it to prevent
further alerts. See “Understanding Zones,” on page 18.
You may want to give certain programs (for example, your browser) permission to
bypass the Internet Lock, so that you can continue to perform some basic functions
under the lock's higher security. See “Setting passlock permission for a program,” on
page 84.
If you are receiving a lot of Internet Lock alerts, it is possible that your Automatic
Internet Lock settings are engaging the Internet Lock after every brief period of
inactivity.
To reduce the number of alerts, you can do either of the following:
! Turn off the Automatic Internet Lock.
! Increase the interval of inactivity required to engage the Automatic Internet Lock to
engage. For more information, see “Enabling the automatic lock,” on page 70.

Appendix A: Alert reference Remote alert
Remote alert
Remote alerts are displayed on an ICS client machine when Zone Labs security software
blocked traffic at the ICS gateway. If you are not on a machine that is a client in an ICS
network, you will never see this alert.
Remote alerts occur when:
! Zone Labs security software starts up on the ICS gateway. The alert displays the
message “The remote firewall has started.”
! Zone Labs security software shuts down on the ICS gateway. The alert displays the
message “The remote firewall has stopped.”
! The Internet Lock has engaged on the ICS gateway. This may prevent the client
machine from performing some tasks. The alert displays the message “The remote
firewall has engaged the Internet Lock.”
! The Internet Lock is opened on the ICS gateway. The alert displays the message “The
remote firewall has disengaged the Internet Lock.”
What you should do
Click OK to close the alert box. You do not have to do anything else to ensure your
security.
If you do not want to see Remote alerts on the ICS client machine:
1. Select Firewall|Main, then click Advanced.
2. In the Internet Connection Sharing area, clear the check box labeled Forward alerts
from gateway to this computer.

Appendix A: Alert reference Program alerts
Program alerts
Most of the time, you’re likely to see program alerts when you’re actually using a
program. For example, if you’ve just installed Zone Labs security software, and you
immediately open Microsoft Outlook and try to send an e-mail message, you’ll get a
program alert asking if you want Outlook to have Internet access. However, program
alerts can also occur if a Trojan horse or worm on your computer is trying to spread, or
if a program on your computer is trying to modify your operating system.

Appendix A: Alert reference New Program alert
New Program alert

New Program alerts enable you to set access permission for program that has not asked
for Internet Zone or Trusted Zone access before. If you click Allow, the program is
allowed access. If you click Deny, the program is denied access.
New Program alerts occur when a program on your computer tries to initiate a
connection with a computer in the Internet Zone or Trusted Zone, and that program
has not already received access permission from you or, if you have enabled it, from
SmartDefense Advisor.
As you begin to work with Zone Labs security software, you will probably see one or
more New Program Alerts.
What you should do
Click Allow or Deny in the alert pop-up after answering these questions:
! Did you just launch a program or process that would reasonably require permission?
If so, it’s probably safe to click Allow. If not, continue.
! Do you recognize the name of the program in the Alert pop-up? If so, does it make
sense for the program to need permission? If so, it’s probably safe to click Allow. If
not, or if you’re not sure, continue.
! Click the More Info button in the alert box. This submits your alert information (for
example, the name of the program and the address it was trying to reach) to
SmartDefense Advisor, which then displays a Web page with information about the
alert and the program. Use the SmartDefense Advisor information to help you
decide if it’s safe to answer Allow.
If your browser does not have permission to access the Internet, you will be re-
routed to this help file. To access SmartDefense Advisor, give your browser
permission to access the Internet.
! If you’re really not sure what to do, it’s best to click Deny. You can always grant
permission later by going to the Programs tab. “Setting access permissions for new
programs,” on page 74.
It's normal to see several New Program alerts soon after installing Zone Labs security
software. As you assign permissions to each new program, the number of alerts you see
will decrease. To keep from seeing Repeat Program alerts, select Remember this
setting before clicking Allow or Deny.
If SmartDefense Advisor is set to “Auto,” Zone Labs security software issues Program
alerts only if no automatic setting is available. If you choose Remember this setting in
a Program alert when allowing or denying program access, Zone Labs security software

Appendix A: Alert reference Repeat Program alert
keeps your setting unless SmartDefense Advisor comes out with a different setting, or
until you change the setting manually in the Programs tab.
Repeat Program alert

Repeat Program alerts occur when a program on your computer tries to initiate a
connection with a computer in the Internet Zone or Trusted Zone, and that program
has asked for permission before.
If you respond Allow or Deny to a New Program alert without checking Remember
this answer, you’ll see a Repeat Program alert the next time the program asks for access
permission.
What you should do
You should respond to Repeat Program alerts in the same way you would to New
Program alerts. See “New Program alert,” on page 210.
To keep from seeing Repeat Program alerts, select Remember this setting before
clicking Allow or Deny in any New Program or Repeat Program alert. This sets the
permission for the program to Allow or Block in the Programs tab.
If SmartDefense Advisor is set to “Auto,” Zone Labs security software issues Program
alerts only if no automatic setting is available. If you choose Remember this setting in
a Program alert when allowing or denying program access, Zone Labs security software
keeps your setting unless SmartDefense Advisor comes out with a different setting, or
until you change the setting manually in the Programs tab.
Changed Program alert

Changed Program alerts warn you that a program that has asked for access permission
or server permission before has changed somehow. If you click Allow, the changed
program is allowed access. If you click Deny, the program is denied access.
Changed Program alerts can occur if you have updated a program since the last time it
accessed the Internet. However, they can also occur if a hacker has somehow managed
to tamper with the program.
Remember, some programs are configured to access the Internet regularly to look for
available updates. Consult the documentation for your programs, or refer to the support
Web sites of their vendors, to find out if they have automatic update functionality.
What you should do
To determine how to respond to a Changed Program alert, consider these questions:
! Did you (or, if you’re in a business environment, your systems administrator) recently
upgrade the program that is asking for permission?

Appendix A: Alert reference Program Component alert
! Does it make sense for the program to need permission?

If you can answer “yes” to both questions, it’s probably safe to click Allow.
If you're not sure, it's safest to click Deny. You can always grant permission later
by going to the Programs tab. See “Setting permissions for specific programs,”
on page 76.

Changed Program alerts are always displayed because they require a Allow or Deny
response from you. If you are using a program whose checksum changes frequently, you
can avoid seeing numerous alerts by having Zone Labs security software check the
program’s file name only. “Adding a program to the programs list,” on page 79.
Program Component alert

Use the Program Component alert to allow or deny Internet access to a program that is
using one or more components that haven't yet been secured by Zone Labs security
software. This helps protect you from hackers who try to use altered or faked
components to get around your program control restrictions.
By clicking Allow, you allow the program to access the Internet while using the new or
changed components. By clicking Deny, you prevent the program from accessing the
Internet while using those components.
Program Component alerts occur when a program accessing the Internet or local
network is using one or more components that Zone Labs security software has not yet
secured, or that has changed since it was secured.
Zone Labs security software automatically secures the components that a program is
using at the time you grant it access permission. This prevents you from seeing a
Component alert for every component loaded by your browser. To learn how Zone
Labs security software secures program components, see “Managing program
components,” on page 85.
What you should do
The proper response to a Program Component alert depends on your situation.
Consider the following questions:
! Are any of the following true?
# You just installed or reinstalled Zone Labs security software.
# You recently updated the application that is loading the component (For the
application name, look under Technical Information in the alert pop-up.)
# The application that is loading the component has an automatic update function.

Appendix A: Alert reference Server Program alert
# Someone else (for example, a systems administrator at your workplace) may have
updated a program on your computer without your knowledge.
! Are you actively using the application that loaded the component?
If you can answer “yes” to both questions, it is likely that Zone Labs security software
has detected legitimate components that your browser or other programs need to use. It
is probably safe to answer Allow to the Program Component alert.
By clicking Allow, you allow the program to access the Internet while using the new or
changed components. If you cannot answer yes both questions, or if you feel unsure
about the component for any reason, it is safest to click Deny.
By clicking Deny, you prevent the program from accessing the Internet while using
those components.
If you're not sure what to do, or if you decide to click Deny, investigate the
component to determine if it is safe.

You may receive a large number of component alerts if you raised the Program
Authentication level to high soon after installing Zone Labs security software. With
authentication set to High, Zone Labs security software cannot automatically secure the
large number of DLLs and other components commonly used by browsers and other
programs.
To reduce the number of alerts, lower the authentication level to medium for the first
few days after installing Zone Labs security software.
If you have been using Zone Labs security software for more than a few days, it is very
rare to see large numbers of program alerts.
Server Program alert

Server Program alerts enable you to set server permission for a program on your
computer.
Server Program alerts occur when a program on your computer wants server
permission for either the Internet Zone or Trusted Zone, and that program has not
already received server permission from you.
Relatively few programs on your computer will require server permission. Some
common types of programs that do are:
! Chat
! Internet Call Waiting

Appendix A: Alert reference Server Program alert
! Music file sharing (such as Napster)

! Streaming Media (such as RealPlayer)
! Voice-over-Internet
! Web meeting
If you are using the types of programs described above that require server permission to
operate properly, grant permission before you start using the program. See “Granting a
program permission to act as a server,” on page 81.
If your browser does not have permission to access the Internet, you will be re-
routed to the online help. To access SmartDefense Advisor, give your browser
permission to access the Internet. See “Granting a program permission to access
the Internet,” on page 80.
What you should do

Before responding to the Server Program alert, consider the following:
! Did you just launch a program or process that would reasonably require permission?
If so, it’s probably safe to click Allow. If not, continue.
! Do you recognize the name of the program in the alert pop-up, and if so, does it
make sense for the program to need permission? If so, it’s probably safe to click
Allow.
! Click the More Info button in the alert box. This submits your alert information (for
example, the name of the program and the address it was trying to reach) to
alert and the program. Use the SmartDefense Advisor information to help you
decide if it’s safe to answer Allow. For more information, see “Using SmartDefense
Advisor and Hacker ID,” on page 170.
! If you are still not certain that the program is legitimate and needs server permission,
it is safest to click Deny. If it becomes necessary, you can give the program server
permission later by using the Programs tab. See “Granting a program permission to
act as a server,” on page 81.
If you are using the types of programs described above that require server permission to
operate properly, use the Programs tab in Zone Labs security software to grant
permission before you start using the program. If you’re seeing many server program
alerts, you may want to download and run an anti-virus or anti-spyware tool as an added
precaution.

Appendix A: Alert reference Advanced Program alert
Advanced Program alert

Advanced Program alerts are similar to other Program alerts (New Program, Repeat
Program, and Changed Program)—they inform you that a program is attempting to
access the network.
However, they differ from other Program alerts in that the program is attempting to use
another program to connect to the Internet, or is attempting to manipulate another
program’s functionality.
Advanced Program alerts occur in two situations: when a program on your computer
tries to initiate a connection with a computer in the Internet Zone or Trusted Zone by
instructing another program to connect; or when a program attempts to hijack the
processes of another program by calling the OpenProcess function.
There are some legitimate programs associated with your operating system that may
require access to another program. For example, if you were using Windows Task
Manager to shutdown Internet Explorer, Windows Task Manager would need to call the
OpenProcess function on the Internet Explorer program in order to shut it down.
What you should do
How you should respond to an Advanced Program alert depends upon the cause of the
alert. If the Advanced Program alert was caused by the OpenProcess function being
called, you should determine whether the function was called by a legitimate program or
by a malicious one. Verify that the program cited in the alert is one you trust to carry out
this function. For example, if you were attempting to shut down a program using
Windows Task Manager when you received the Advanced Program alert, it is probably
safe to answer Allow. Similarly, if the alert was caused by a program using another
program to access the Internet and that program routinely requests such permission, is
probably safe to answer Allow. If you are unsure as to the cause of the alert or the
expected behavior of the program initiating the request, it is safest to click Deny. After
denying advanced permission to the program, perform an Internet search on the
program’s file name. If the program is malicious, it is likely that information about it is
available, including how to remove it from your computer.
It is unusual to see a large number of Advanced Program alerts. If you receive repeated
alerts, research the program name or names and consider either removing the program
from your computer or providing the program with the necessary access rights.
Automatic VPN Configuration alert

Automatic VPN Configuration alerts occur when Zone Labs security software detects
VPN activity. Depending upon the type of VPN activity detected, and whether Zone
Labs security software was able to configure your VPN connection automatically, you
may see one of three Automatic VPN Configuration alerts.

Appendix A: Alert reference Manual Action Required alert

Automatic VPN Configuration alerts occur when Zone Labs security software detects
VPN activity that it is not configured to allow.
What you should do
How you should respond to an Automatic VPN Configuration alert depends upon
which Automatic VPN Configuration alert you encounter, whether you are running
VPN software or not, and whether you want to configure Zone Labs security software
to allow your VPN connection.
If you have created an expert firewall rule that blocks VPN traffic, you will need
to modify the expert rule to allow VPN traffic. See “Creating expert firewall
! If you are running VPN software on your computer and you want to configure the
connection, select either:
Configure Zone Labs security software to support this VPN connection, or
I am running VPN software and would like to configure Zone Labs security
software to support it
! If are running VPN software but do not want Zone Labs security software to
configure your connection, select Do not configure Zone Labs security software
to support this VPN connection.
! If you are not running VPN software, select I am not running VPN software.
If you are running VPN software, the only way to see fewer of these alerts is to properly
configure your Zone Labs security software to allow your VPN software and its
required resources. See “Configuring your VPN connection manually,” on page 36.
Manual Action Required alert

A Manual Action Required alert informs you that further steps must be taken before
Zone Labs security software is properly configured to support your VPN connection.
A Manual Action Required alert occurs when Zone Labs security software is unable to
configure your VPN connection automatically, or if further manual changes are required
before automatic configuration can be completed.
What you should do
Manual Action Required alerts do not require a response from you. To configure VPN
connection manually, see “Configuring your VPN connection manually,” on page 36
and follow the instructions for manual configuration.

Appendix A: Alert reference Manual Action Required alert

It is unusual for you to see many Manual Action Required alerts. If you do see multiple
alerts, either perform the required steps to properly configure your Zone Labs security
software to support your VPN connection, or remove the VPN software from your
computer.

Appendix A: Alert reference OSFirewall alerts
OSFirewall alerts
OSFirewall alerts are alerts that appear when programs or processes on your computer
are attempting to modify your computer’s settings or programs.
There are three types of OSFirewall alerts, two of which require a response from you:
Medium-rated Suspicious and High-rated Suspicious. Malicious alerts do not require a
response from you.
OSFirewall protection is not available in ZoneAlarm.
Medium-rated Suspicious Behavior alert

A Medium-rated Suspicious Behavior alert informs you that a program on your
computer is attempting activity that is uncommon or unexpected. If you click Allow, the
program is allowed to perform the activity. If you click Deny, the program is prevented
from performing the activity and is given Restricted access, which means that all future
suspicious behavior will be denied.
Hackers often use trusted programs to modify other programs, such as your browser
settings or to compromise your computer’s operating system.
What you should do
Click Allow or Deny to respond. If you are not sure whether to allow or deny the
action, click the More Info button in the alert box. This submits your alert information
(for example, the name of the program and the activity it was trying to perform) to
alert and the behavior. Use the SmartDefense Advisor information to help you decide
whether to allow or deny the action. For more information on the causes of suspicious
behavior alerts, see “Medium-rated suspicious behavior,” on page 252.
Selecting Remember this setting before clicking Allow or Deny causes Zone Labs
security software to remember your setting and apply it automatically when the
program attempts another similar action. If SmartDefense Advisor is set to Auto,
and you select Remember this setting in an OSFirewall alert, your setting will
remain effective unless SmartDefense Advisor comes out with a different setting,
or until you change the setting manually in the Programs tab.
High-rated Suspicious Behavior alert

A High-rated Suspicious Behavior alert informs you that a program on your computer is
attempting activity that could be dangerous. If you click Allow, the program is allowed
to perform the activity. If you click Deny, the program is prevented from performing
the activity and is given Restricted, access which means that all future suspicious
behavior will be denied.

Appendix A: Alert reference Malicious behavior alert

These alerts occur when a program or component on your computer was detected
trying to hijack a process or program on your computer, or to alter default settings on
your computer or one of its programs.
What you should do
Because of the nature of the actions that cause a High-rated Suspicious Behavior alert to
appear, it’s safest to click Deny in the alert pop-up. If you’re not sure, click the More
Info button in the alert box. This submits your alert information (for example, the name
of the program and the activity it was trying to perform) to SmartDefense Advisor,
which then displays a Web page with information about the alert and the behavior. Use
the SmartDefense Advisor information to help you decide whether to allow or deny the
action. Be aware, however, that some legitimate programs perform behavior of this kind
as part of normal program functioning. If you trust the program requesting permission,
then it may be safe to allow this behavior. In such cases, denying the behavior may result
in interrupted program activity. For more information on the causes of suspicous
behavior alerts, see “Program behavior,” on page 251.
Selecting Remember this setting before clicking Allow or Deny causes Zone Labs
security software to remember your setting and apply it automatically when the
program attempts another similar action. If SmartDefense Advisor is set to Auto,
and you select Remember this setting in an OSFirewall alert, your setting will
remain effective unless SmartDefense Advisor comes out with a different setting,
or until you change the setting manually in the Programs tab.
Malicious behavior alert

A Malicious Behavior alert informs you that a malicious program is attempting to run
on your computer. Programs that are designated by Zone Labs security experts tend to
be known worms, viruses, trojans, or other such malware.
These alerts inform you that a program on your computer will be killed (shut down).
What you should do
Malicious alerts do not require a response from you. They merely inform you of an
action that is taking place. If a trustworthy program is mistakenly killed, you can enable
the program from the Programs List.

Appendix A: Alert reference ID Lock alert
ID Lock alert
An ID Lock alert informs you that information stored in myVAULT is about to be sent
to a destination that is not on the Trusted Sites list.
An ID lock alert occurs when information stored in myVAULT is either entered into a
Web page or e-mail message, or when your password is being sent to a destination in
clear text (unencrypted) form without your authorization.
What you should do
You should determine whether the site requesting the information is one that you trust.
Whether you should allow or block the information depends upon the sensitivity of the
information, the legitimacy of the request, and the authenticity of the site. If you are in
the process of making an online purchase with a trustworthy vendor when you see the
alert, it’s probably safe to let the information go through. If you see an alert requesting
your information when you are not performing such a transaction, it’s safest to block
the transmission.
Additionally, a few sites transmit passwords in clear text format. If you were to block
clear text passwords for a site, then visit that site and enter your password, you would
see an ID Lock alert.
You may see frequent ID lock alerts if you frequently submit myVAULT contents to
sites that you have not entered on the Trusted Sites list, or if you have blocked clear text
passwords for a site that uses clear text passwords. You can minimize the number of ID
Lock alerts by adding sites to the Trusted Sites list with which you frequently share your
personal information, and by allowing clear text passwords for those sites that use them.

Appendix A: Alert reference New Network alert
New Network alert

A New Network alert appears when Zone Labs security software detects that you’re
connected to a network you haven’t seen before—be it a wireless home network, a
business LAN, or your ISP’s network. You can use the alert pop-up to enable file and
printer sharing with that network.
The first time you use Zone Labs security software, you will almost certainly see a New
Network alert. Don’t worry! This alert is a convenience tool designed to help you
configure Zone Labs security software.
New Network alerts occur when you connect to any network—be it a wireless home
network, a business LAN, or your ISP’s network.
What you should do
How you respond to a New Network alert depends on your particular network
situation.
If you are connected to a home or business local network and you want to share
resources with the other computers on the network, put the network in the Trusted
Zone.
To add the new network to the Trusted Zone:

1. In the New Network alert pop-up, type a name for the network (for example “Home
NW”) in the Name box.
2. Select Trusted Zone from the Zone drop-down list.
3. Click OK.
If you are not certain what network Zone Labs security software has detected,
write down the IP address displayed in the alert box. Then consult your home
network documentation, systems administrator, or ISP to determine what
network it is.
Use caution if Zone Labs security software detects a wireless network. It is
possible for your wireless network adapter to pick up a network other than your
own. Be sure that the IP address displayed in the New Network alert is your
network’s IP address before you add it to the Trusted Zone.

Appendix A: Alert reference New Network alert
If you are connected to the Internet through a standard modem and dial-up connection,
a Digital Subscriber Line (DSL), or a cable modem, click OK in the New Network alert
pop-up.
If you click Cancel, Zone Labs security software will block your Internet
connection. Do not add your ISP network to the Trusted Zone.

It is unusual to receive a lot of New Network alerts.

Appendix A: Alert reference Instant Messaging alerts
Instant Messaging alerts

This section provides an explanation of the types of alert messages that may appear
during an instant messaging session that is protected by Zone Labs security software.
The table below lists the alert messages that can appear when using Zone Labs security
software. Consult the table for an explanation of why these alerts appear and to
determine whether any action is required on your part. All alert messages appear in
brackets [ ] in your instant messaging window.
Alert text Explanation
Session not encrypted because [contact's IM This alert appears when you have encryption
ID] disabled encryption enabled, but your contact has disabled
encryption.
Session not encrypted because [contact's IM This alert appears in your instant messaging
ID] is not protected by ZoneAlarm Security window when you are having a conversation
Suite with a contact who is not using ZoneAlarm
Security Suite
Information about [description] was removed This alert appears when you attempt to
from your previous message in compliance transmit information that is stored in
with your ID Lock settings myVAULT. The description of the item as it
appears in myVAULT is displayed between
brackets.
Link removed This alert appears in the message recipi-
ents’s window in place of a removed link.
Session encrypted This alert appears at the beginning of an
encrypted instant messaging conversation.
Potentially harmful content was removed This alert is appended to the filtered mes-
from this message sage.
Your message was blocked because you are This alert appears when you attempt to send
not on [contact's IM ID]'s contact list a message to someone who has Spam
Blocker enabled, but who does not have you
on his or her contact list.
A file transfer on [contact's IM ID]'s PC was This alert appears when you attempt to send
blocked a file to a contact, but the contact has
blocked file transfers in ZoneAlarm Security
Suite.
Video transmission on [contact's IM ID]'s PC This alert appears when a you attempt to
was blocked transmit video to a contact, but the contact
has blocked video transmission.
Table A-1: IM alert messages

Appendix A: Alert reference Instant Messaging alerts
Alert text Explanation
Potentially harmful formatting or scripting This alert appears when your contact set the
was removed from your last message Inbound protection option for Tags to Block,
and you attempt to send a message to a con-
tact that includes formatting or scripting.
A potentially harmful link was removed from This alert appears when your contact set the
your last message Inbound protection option for Active to
Block, and you attempt to send a message to
a contact that includes an executable link.
Table A-1: IM alert messages

Appendix
Keyboard shortcuts
B
Many features of Zone Labs security software are accessi-
ble using keyboard shortcuts.
! “Navigation shortcuts,” on page 226

! “Global function shortcuts,” on page 227
! “Dialog box commands,” on page 229
! “Button shortcuts,” on page 230
225
Appendix B: Keyboard shortcuts Navigation shortcuts
Navigation shortcuts
Use these keystrokes to navigate through Zone Labs security software's panels, Tabs,
and dialog boxes. Use F6 to reach the navigation element you want. Then use UP,
DOWN, LEFT, and RIGHT arrows to reach the selection you want within that group.
For example:
To reach the Zones tab of the Firewall panel:

1. Press F6 until the left menu bar is selected.
2. Press the DOWN arrow until the Firewall panel is selected
3. Press F6 until the tabs are selected.
4. Press UP, DOWN, LEFT, or RIGHT until the Zones tab is selected.
Keystroke Function
F1 Opens online help for the

current panel.
F6 Navigates through interface
areas in the following order:
panel selection, TAB selec-
tion, panel area, Stop/Lock
controls.
TAB Navigates through the inter-
face areas in the same order
as F6. However, pressing
Tab when the panel area is
active also navigates
through the groups of con-
trols within the panel.
UP and DOWN arrows Navigates through individ-
ual controls within a group
of controls.
LEFT and RIGHT arrows Also navigate through indi-
vidual controls within a
group of controls. In list
views, controls horizontal
scrolling.
ALT+SPACEBAR Opens the Windows control
menu (maximize, mini-
mize, close).
Table B-1: Navigation shortcuts

Appendix B: Keyboard shortcuts Global function shortcuts
Global function shortcuts

Use the following keystrokes to activate functions from multiple locations in the
interface. Note that some keystrokes may have other functions in specific panels. Those
cases are listed under Button Shortcuts, below.
Keystroke Function
CTRL+S Engages and disengages the

Stop button (Emergency
Lock).
CTRL+L Engages and disengages the
Internet Lock.
ALT+T Hides and displays explana-
tory text.
ALT+D Restores defaults settings.
ALT+C Opens a Custom dialog box,
where one is available.
ALT+U Opens a second Custom
dialog box, where two Cus-
tom buttons are available
(for example, in the Main
tab of the Program Control
panel).
ALT+A Opens an advanced dialog
box, where one is available.
ALT+DOWN ARROW Opens the active drop-down
list box. In list views, opens
the left-click shortcut menu
if one is available.
SHIFT+F10 In list views, opens the
right-click shortcut menu if
one is available.
ESC Equivalent to clicking a
Cancel button.
ENTER Equivalent to clicking the
active button.
ALT+P Equivalent to clicking an
Apply button.
Delete Removes a selected item
from a list view.
ALT+F4 Shuts down Zone Labs
security software.
Table B-2: Global shortcuts

Appendix B: Keyboard shortcuts Global function shortcuts
Keystroke Function
ALT+K Hides everything except the

Dashboard.
ALT+A Equivalent to clicking an
Add button, where one is
available.
ALT+R Equivalent to clicking a
Remove button
ALT+E Equivalent to clicking an
Edit button.
ALT+M Equivalent to clicking a
More Info button, where one
is available.
Table B-2: Global shortcuts

Appendix B: Keyboard shortcuts Dialog box commands
Dialog box commands

Use the keystrokes below when a dialog box is open.
Keystroke Function
Tab Activates the next control in the dialog box.

SHIFT+TAB Activates the previous control in the dialog
box.
CTRL+TAB Opens the next TAB in a multiple-TAB dialog
box.
CTRL+SHIFT+TAB Opens the previous TAB in a multiple-TAB
dialog box.
ALT+DOWN ARROW Opens the active drop-down list box.
SPACEBAR Clicks an active button. Selects/clears an
active check box.
ENTER Same as clicking the active button
ESC Same as clicking the Cancel button.
Table B-3: Dialog box shortcuts

Appendix B: Keyboard shortcuts Button shortcuts
Button shortcuts
Use the keystrokes below to click available buttons in an active window.
Panel Tab Keystroke Equivalent to clicking
Overview Status Tab Alt + R Tutorial

Overview Status Tab Alt + M What’s New at Zone Labs?
Overview Product Info Alt + I Change License
Overview Product Info Alt + B Buy Now
Overview Product Info Alt + N Renew
Overview Product Info Alt + R Change Reg.
Overview Preferences Alt + P Set Password
Overview Preferences Alt + B Backup
Overview Preferences Alt + R Restore
Overview Preferences Alt + O Log In/Log Out
Overview Preferences Alt + U Check for Update
Firewall Main Alt + C Internet Zone Custom
Firewall Main Alt + U Trusted Zone Custom
Firewall Main Alt + A Advanced
Firewall Zones Alt +A Add
Firewall Zones Alt + R Remove
Firewall Zones Alt + E Edit
Firewall Zones Alt + P Apply
Firewall Expert Alt + A Add
Firewall Expert Alt + R Remove
Firewall Expert Alt + E Edit
Firewall Expert Alt + P Apply
Firewall Expert Alt + G Groups
Program Control Main Alt + C Program Control Custom
Program Control Main Alt + U Automatic Lock Custom
Program Control Main Alt + A Advanced
Program Control Programs Alt + A Add
Program Control Programs Alt + O Options
Program Control Components Alt + M More info
Table B-4: Keystrokes for activating buttons

Appendix B: Keyboard shortcuts Button shortcuts
Anti-virus / Anti-spyware Main ALT + S Scan for Viruses/Spyware

Anti-virus / Anti-spyware Main ALT + U Update Now
Anti-virus / Anti-spyware Main ALT + A Advanced Options
Anti-virus / Anti-spyware Main ALT + V Scan for Viruses
Anti-virus / Anti-spyware Main ALT + W Scan for Spyware
Anti-virus / Anti-spyware Quarantine ALT + D Delete
Anti-virus / Anti-spyware Quarantine ALT + E Restore
Anti-virus / Anti-spyware Quarantine ALT + M More Info
E-mail Protection Main ALT + A Advanced
E-mail Protection Attachments ALT + C Check All
E-mail Protection Attachments ALT + R Clear All
E-mail Protection Attachments ALT + A Add
E-mail Protection Attachments ALT + P Apply
Privacy Main Alt + C Cookie Control Custom
Privacy Main Alt + U Ad Blocking Custom
Privacy Main Alt + S Mobile Code Control Custom
Privacy Site List Alt + A Add
Privacy Site List Alt + O Options
Privacy Cache Cleaner Alt + N Clean Now
Privacy Cache Cleaner Alt + U Custom
Privacy Hard Drive Alt + D Reset to Default
IE/MSN
Netscape
Privacy Hard Drive Alt + P Apply
IE/MSN
Netscape
Privacy IE/MSN Alt + S Select
Netscape
ID Lock myVAULT Alt + A Add
ID Lock myVAULT Alt + O Options
ID Lock myVAULT Alt + N Encrypt
ID Lock myVAULT Alt + E Edit
ID Lock myVAULT Alt + R Remove
ID Lock Trusted Sites Alt + A Add

Keyboard shortcuts Button shortcuts
ID Lock Trusted Sites Alt + R Remove

Parental Control Main Alt + A Advanced
Parental Control Categories Alt + C Check All
Parental Control Categories Alt + R Clear All
Alerts & Logs Main Alt + D Reset to Default
Alerts & Logs Main Alt + C Custom
Alerts & Logs Main Alt + A Advanced
Alerts & Logs Log Viewer Alt + M More Info
Alerts & Logs Log Viewer Alt + D Clear List
Alerts & Logs Log Viewer Alt + A Add to Zone
Alerts & Logs Log Control Alt + B Browse
Alerts & Logs Log Control Alt + E Delete Log

Appendix
Troubleshooting
C
This chapter provides guidance for troubleshooting issues
you may encounter while using Zone Labs security soft-
ware.
Topics:
! “VPN,” on page 234

! “Networking,” on page 236
! “Internet Connection,” on page 238
! “IM Security,” on page 241
! “Anti-virus,” on page 242
! “Third-party software,” on page 244
233
Appendix C: Troubleshooting VPN
VPN
If you are having difficulty using VPN software with Zone Labs security software, refer
to the table for troubleshooting tips provided in this section.
If... See...
You can't connect to your Virtual Private Net- “Configuring Zone Labs security software for
work (VPN) VPN traffic,” on page 234
You have created expert firewall rules “VPN auto-configuration and expert rules,”
on page 234
You are using a supported VPN client and “Automatic VPN detection delay,” on
Zone Labs security software does not detect page 234
it automatically the first time you connect
Table C-1: Troubleshooting VPN problems
Configuring Zone Labs security software for VPN traffic

If you cannot connect to your VPN, you may need to configure Zone Labs security
software to accept traffic coming from your VPN.
To configure Zone Labs security software to allow VPN traffic:

1. Add VPN-related network resources to the Trusted Zone.
2. Grant access permission to the VPN client and any other VPN-related programs on
your computer.
See “Setting permissions for specific programs,” on page 76.
3. Allow VPN protocols.
See “Adding a VPN gateway and other resources to the Trusted Zone,” on page 37.
VPN auto-configuration and expert rules

If you have created expert firewall rules that block VPN protocols, Zone Labs security
software will not be able to automatically detect your VPN when you initiate a
connection. To configure your VPN connection, you will need to make sure that your
VPN client and VPN-related components are in the Trusted Zone, and that they have
permission to access the Internet. See “Configuring your VPN connection,” on page 35.
Automatic VPN detection delay

Zone Labs security software periodically polls your computer to determine if supported
VPN protocols are engaged. Upon detection, Zone Labs security software prompts you
to configure your connection automatically. If you have recently install a VPN client and
have tried to connect, Zone Labs security software may not have detected your VPN
configuration. If you prefer Zone Labs security software to configure your connection

Appendix C: Troubleshooting Automatic VPN detection delay
automatically, you can wait ten minutes then, try connecting again. If you prefer to
connect right away, you can configure your connection manually. See “Configuring your
VPN connection,” on page 35.

Appendix C: Troubleshooting Networking
Networking
If you are having difficulty connecting to your network or using networking services,
refer to the table for troubleshooting tips provided in this section.
If ... See...
You can’t see the other computers in your “Making your computer visible on your local
Network Neighborhood, or if they can’t see network,” on page 236
you
You can’t share files or printers over your “Sharing files and printers across a local net-
home or local network work,” on page 236
Your computer is on a Local Area Network “Resolving a slow start up,” on page 237
(LAN) and takes a long time to start up when
Zone Labs security software is installed
Table C-2: Troubleshooting network problems
Making your computer visible on your local network

If you can’t see the other computers on your local network, or if they can’t see your
computer, it is possible that Zone Labs security software is blocking the NetBIOS
traffic necessary for Windows network visibility.
To make your computer visible on the local network:

you’re sharing with) to your Trusted Zone. See “Adding to the Trusted Zone,” on
page 47.
2. Set the Trusted Zone security level to Medium, and the Internet Zone security level
to High. This allows trusted computers to access your shared files, but blocks all
other machines from accessing them. See “Setting advanced security options,” on
page 42.
Zone Labs security software will detect your network automatically and display
the New Network alert. You can use the alert to add your network subnet to the
Trusted Zone. For more information, see “New Network alert,” on page 221.
Sharing files and printers across a local network

Zone Labs security software enables you to quickly and easily share your computer so
that the trusted computers you’re networked with can access your shared resources, but
Internet intruders can’t use your shares to compromise your system.

Appendix C: Troubleshooting Resolving a slow start up
To configure Zone Labs security software for secure sharing:

you’re sharing with) to your Trusted Zone. See “Adding to the Trusted Zone,” on
page 47.
2. Set the Trusted Zone security level to Medium. This allows trusted computers to
access your shared files. See “Choosing security levels,” on page 41.
3. Set the Internet Zone security level to High. This makes your computer invisible to
non-trusted computers. See “Setting the security level for a Zone,” on page 41.
Resolving a slow start up

If Zone Labs security software is configured to load at startup, some users connected to
the LAN may find that it takes several minutes for the startup process to finish.
In most cases, this is because your computer needs access to your network’s Domain
Controller to complete its startup and login process, and Zone Labs security software is
blocking access because the Controller has not been added to the Trusted Zone.
To solve this problem, add the host name or IP address of your network’s Domain
Controller to the Trusted Zone.

Appendix C: Troubleshooting Internet Connection
Internet Connection
If you are having difficulty connecting to the Internet, refer to the table for
troubleshooting tips provided in this section.
If... See...
You cannot connect to the Internet “Connecting to the Internet fails after instal-
lation,” on page 238
You can connect to the Internet but are dis- “Allowing ISP Heartbeat messages,” on
connected after a short time page 239
Your computer is an Internet Connection “Connecting through an ICS client,” on
Sharing (ICS) client and you can’t connect to page 239
the Internet
Your computer uses a proxy server to connect “Connecting through a proxy server,” on
to the Internet and you can’t connect to the page 240
Internet
You see the message “Could not contact “Unable to connect to program advice
automatic program server” in a program server,” on page 240
alert.
Table C-3: Troubleshooting Internet connection problems
Connecting to the Internet fails after installation

If you are unable to connect to the Internet after installing Zone Labs security software,
the first troubleshooting step is to determine whether Zone Labs security software is
the cause. If you are unable to follow the steps below, for example, if you can't clear the
Load Zone Labs security software at startup check box, contact Zone Labs technical
support.
To determine if Zone Labs security software is the cause of connection problems:

2. In the General area, clear the check box Load Zone Labs security software at
startup.
A warning dialog labeled Zone Labs TrueVector Service opens.
3. Click Allow.
4. Restart your computer, then try to connect to the Internet.
If you can connect Your Zone Labs security software settings may be the
cause of your connection problems. Make sure that
your browser has access permission.
If you cannot connect Your Zone Labs security software settings are not the
cause of your connection problems.

Appendix C: Troubleshooting Allowing ISP Heartbeat messages
Allowing ISP Heartbeat messages

Internet Service Providers (ISPs) periodically send heartbeat messages to their
connected dial-up customers to make sure they are still there. If the ISP cannot
determine that the customer is there, it might disconnect the customer so that the user’s
IP address can be given to someone else.
By default, Zone Labs security software blocks the protocols most commonly used for
these heartbeat messages, which may cause you to be disconnected from the Internet.
To prevent this from happening, you can identify the server sending the messages and
add it to your Trusted Zone or you can configure the Internet Zone to allow ping
messages.
Identifying the source of the heartbeat messages
This is the preferred solution because it will work whether your ISP uses NetBIOS or
ICMP (Internet Control Message Protocol) to check your connection, and it allows you to
maintain high security for the Internet Zone.
To identify the server your ISP uses to check your connection:

1. When your ISP disconnects you, click Alerts & Logs|Log Viewer.
2. In the alerts list, find the alert that occurred at the time you were disconnected.
3. In the Entry Detail area, note the Source DNS detected.
If you’re not able to identify the server this way, contact your ISP to determine which
servers need access permission.
4. After you have identified the server, add it to the Trusted Zone.
Configuring Zone Labs security software to allow ping messages
If your ISP uses ICMP echo (or ping) messages for connectivity checks, configure Zone
Labs security software to allow ping messages from the Internet Zone.
To configure Zone Labs security software to allow ping messages:

2. In the Internet Zone area, click Custom.
3. Select check box labeled Allow incoming ping (ICMP echo).
4. Click OK.
5. Set the security level for the Internet Zone to Medium.
See “Choosing security levels,” on page 41.
Connecting through an ICS client

If you are using Windows’ Internet Connection Sharing (ICS) option, or a third-party
connection sharing program, and you are unable to connect to the Internet, make sure

Appendix C: Troubleshooting Connecting through a proxy server
that Zone Labs security software is properly configured for the client and gateway
machines. See “Enabling Internet Connection Sharing,” on page 34.
Do not configure Zone Labs security software for Internet Connection Sharing if you
use hardware such as a server or router, rather than a host PC.
Connecting through a proxy server

If you connect to the Internet through a proxy server and you are unable to connect to
the Internet, make sure that the IP address of your proxy server is in your Trusted Zone.
Unable to connect to program advice server

If you receive a Program alert with the message “Could not contact automatic program
server,” in the SmartDefense Advisor area, make sure that your Internet Connection is
working properly.
! Verify that your computer is connected to the network or modem properly.
! If you are connected to the Internet via cable modem or DSL, you may have
encountered a temporary service interruption.
! Many times it is just a matter of trying again later if the user has a working
configuration.
! Launch your browser. If you are unable to connect to any site on the Internet, you
may have Zone Labs security software configured to block Internet access. Providing
the correct permission to your browser may resolve the problem.
If none of these scenarios apply, it’s possible that the server is temporarily unavailable.

Appendix C: Troubleshooting IM Security
IM Security
If you are having difficulty with the IM Security feature, refer to the table for
If... See...
An active IM program does not appear in the “IM programs not appearing in status,” on
Protection Status table page 241
Table C-4: Troubleshooting IM Security problems
IM programs not appearing in status

If you currently have an instant messaging program running but it does not appear in
the Protection Status table on the IM Security panel, exit the instant messaging program
and restart it.
This can occur if your instant messaging programs and Zone Labs security software are
set to launch on startup. To prevent this from recurring, modify the settings for your
instant messaging programs to allow a manual launch.

Appendix C: Troubleshooting Anti-virus
Anti-virus
If you are having difficulty connecting using anti-virus software refer to the table for
If... See...
Anti-virus feature is unavailable “Anti-virus feature installation problem,” on

page 242
Anti-virus Monitoring feature is unavailable “Anti-virus Monitoring alert,” on page 242
You receive an alert about conflicting prod- “Resolving conflicts with anti-virus prod-
ucts ucts,” on page 242
You are unable to turn on the Anti-virus or IM “E-mail scanning or IM Security is unavail-
security features able,” on page 243
Table C-5: Troubleshooting Zone Labs Anti-virus problems
Anti-virus feature installation problem

In some cases, the Anti-virus feature will be unavailable after installation if there were
problems with the installation. This can occur if the av.dll file is not registered properly
during installation, or if an error occurs during an AV Update operation. In such cases,
you will see “Action Required: Re-install ZoneAlarm Security Suite (or ZoneAlarm Anti-
virus)”.
To resolve this issue, exit Zone Labs security software and run the installation program
again. When prompted during installation, choose Upgrade rather than Clean Install.
If after reinstalling the product the Anti-virus panel still does not function properly, you
may try uninstalling the product and performing a clean install. If you cannot resolve
this problem using these measures, please contact Zone Labs customer support.
Anti-virus Monitoring alert

The Anti-virus Monitoring alert lets you know when the anti-virus protection on your
computer is not fully protecting you from viruses. You may receive this alert when your
anti-virus is turned off, when your anti-virus signatures are not up-to-date, or when you
are not running any anti-virus software at all.
Note that not all anti-virus products are monitored, so the absence of an alert does not
necessarily mean you are protected. To ensure your protection, open your anti-virus
software (if it is installed) and perform an update or renew your subscription, if it has
expired.
Resolving conflicts with anti-virus products

If you are using ZoneAlarm Security Suite and you also have another anti-virus product
installed, you may receive a conflict alert that states you must uninstall that product
before using Zone Labs anti-virus. The alert will list the anti-virus software products
that were detected and specify whether ZoneAlarm Security Suite is able to uninstall

Appendix C: Troubleshooting E-mail scanning or IM Security is unavailable
them automatically, or if they must be uninstalled manually. If the products listed cannot
be uninstalled automatically, refer to the individual vendor’s documentation for
instructions for uninstalling the products.
E-mail scanning or IM Security is unavailable

If you are attempting to enable the e-mail scanning option of Zone Labs anti-virus
software or the IM Security feature and are unable to do so, you may have a product
installed that uses Layered Service Provider (LSP) technology that is incompatible with
ZoneAlarm Security Suite. To remedy this situation, you will need to uninstall the
conflicting product(s).
When a conflict occurs, a file called lspconflict.txt is created and placed in the C:/
Windows/Internet Logs directory. This file contains the name of the product(s) that
caused the conflict. You can remove the product(s) manually or send e-mail to
[email protected] and attach the file. Refer to the individual vendors’
documentation for instructions for uninstalling the product(s).

Appendix C: Troubleshooting Third-party software
Third-party software
Many of your most commonly used programs can be configured automatically for
Internet access. Although, in some cases, Internet access can be configured
automatically, many programs also require server access rights.
If you are using programs that Zone Labs security software is unable to recognize and
configure automatically, you may need to configure permissions manually. Refer to the
sections that follow to learn how to configure your programs for use with Zone Labs
security software.
Anti-virus
In order for your anti-virus software to receive updates it must have access permission
for the Trusted Zone.
Automatic updates
In order to receive automatic updates from your anti-virus software vendor, add the
domain that contains the updates (e.g., update.avsupdate.com) to your Trusted Zone.
E-mail protection
In some cases, Zone Labs security software’s MailSafe feature may conflict with the e-
mail protection features of anti-virus software. If this occurs, you can adjust Zone Labs
security software and anti-virus settings so that you benefit from both anti-virus and
Zone Labs security software protection.
To configure your anti-virus software:

1. Set your anti-virus program to scan all files on access, and disable the e-mail scanning
option.
2. In Zone Labs security software, enable Inbound MailSafe protection.
See “Enabling Inbound MailSafe protection,” on page 117.
3. Disable alert display for quarantined MailSafe attachments.
See “Controlling the number of alerts,” on page 161.
With this configuration, MailSafe will still quarantine suspect e-mail

attachments and warn you when you try to open them. If you elect to open an
attachment anyway, your anti-virus software will still scan it.
Browsers
In order for your browser to work properly, it must have access permission for the
Internet Zone and Trusted Zone. Before granting permission, make sure that you

Appendix C: Troubleshooting Chat and instant messaging programs
understand how to configure your browser’s security for optimal protection and have
the latest service packs installed for the browser you are using.
To grant your browser access permission, do any of the following:
! Grant access to the program directly. See “Granting a program permission to access
the Internet,” on page 80.
! Select Allow when a Program alert for the browser appears.
Internet Explorer
If you are using Windows 2000, you may need to allow Internet access rights to the
Services and Controller App (the file name is typically services.exe).
To grant Internet access permission to the Services and Controller App:

2. In the Programs column, locate Services and Controller App.
3. In the Access column, select Allow from the shortcut menu.
Netscape
Netscape Navigator versions above 4.73 will typically experience no problems running
concurrently with Zone Labs security software. If you are using Navigator version 4.73
or higher and are still experiencing difficulty accessing the Web with Zone Labs security
software active, check the browser preferences to make sure you are not configured for
proxy access.
Chat and instant messaging programs

Chat and instant messaging programs (for example, AOL Instant Messenger) may
require server permission in order to operate properly.
To grant server permission to your chat program:
! Answer Allow to the Server Program alert caused by the program.
! Grant server permission to the program.
See “Granting a program permission to act as a server,” on page 81.
We strongly recommend that you set your chat software to refuse file transfers
without prompting first. File transfer within chat programs is a means to
distribute malware such as worms, viruses, and Trojan horses. Refer to your chat
software vendor's help files to learn how to configure your program for maximum
security. If you are using ZoneAlarm Security Suite, set the IM Security level to
High to block file transfers.

Appendix C: Troubleshooting E-mail programs
E-mail programs
In order for your e-mail program (for example, Microsoft Outlook) to send and receive
mail, it must have access permission for the Zone the mail server is in. In addition, some
e-mail client software may have more than one component requiring server permission.
For example, Microsoft Outlook requires that both the base application
(OUTLOOK.EXE) and the Messaging Subsystem Spooler (MAPISP32.exe) to have
server permission.
While you can give your e-mail program access to the Internet Zone, and leave the mail
server there, it’s safer to place the mail server in the Trusted Zone, and limit the
program's access to that Zone only. Once your e-mail client has access to the Trusted
Zone, add the remote mail server (host) to the Trusted Zone.
To learn how to give a program permission to access or act as a server to the Trusted
Zone, see “Setting program permissions manually,” on page 65.
To learn how to add a host to the Trusted Zone, see “Managing traffic sources,” on
page 46.
Internet answering machine programs

To use Internet answering machine programs (such as CallWave) with Zone Labs
security software, do the following:
! Give the program server permission and access permission for the Internet Zone.
! Add the IP address of the vendor's servers to the Trusted Zone.
To find the server IP address, contact the vendor's technical support.
! Set the security level for the Internet Zone to Med.
File sharing programs

File sharing programs, such as Napster, Limewire, AudioGalaxy, or any Gnutella client
software, must have server permission for the Internet Zone in order to work with
Zone Labs security software.
FTP programs
To use FTP (File Transfer Protocol) programs, you may need to make the following
settings adjustments in your FTP client program and in Zone Labs security software:
! Enable passive or PASV mode in your FTP client
This tells the client to use the same port for communication in both directions. If
PASV is not enabled, Zone Labs security software may block the FTP server's
attempt to contact a new port for data transfer.

Appendix C: Troubleshooting Games
! Add the FTP sites you use to the Trusted Zone

! Give Trusted Zone access permission to your FTP client program.
To learn how to add to the Trusted Zone and give access permission to a program, see
“Setting advanced security options,” on page 42.
Games
In order to play games over the Internet while using Zone Labs security software, you
may have to adjust the settings listed below.
Note that you can configure Zone Labs security software to suppress most alerts
while you are playing a game. For details, see “Game Mode,” on page 162.
Program permission
In order to function, many Internet games require access permission and/or server
permission for the Internet Zone.
The easiest way to grant access is to answer “Allow” to the program alert caused by the
game program. However, many games run in “exclusive” full screen mode, which will
prevent you from seeing the alert. Use any of the methods below to solve this problem.
! Set the game to run in a window
This will allow you to see the alert, if the game is running at a resolution lower than
that of your desktop. If the alert appears but you cannot respond to it because your
mouse is locked to the game, press the Windows logo key on your keyboard.
After granting the game program Internet access, reset the game to run full-screen.
! Use software rendering mode
By changing your rendering mode to “Software Rendering,” you can allow Windows
to display the alert on top of your game screen. After allowing the game Internet
access, you can change back to your preferred rendering device.
! Use Alt+Tab
Press Alt+Tab to toggle back into Windows. This leaves the game running, but
allows you to respond to the alert. Once you have allowed Internet access, press
Alt+Tab again to restore your game.
The last method may cause some applications to crash, especially if you are
using Glide or OpenGL; however, the problem should be corrected the next time
you run the game. Sometimes you can use Alt-Enter in the place of Alt-Tab.

Appendix C: Troubleshooting Remote control programs
Security level/Zone
Some Internet games, particularly those that use Java, applets, or other Web-based
portal functionality, may not work properly when your Internet Zone security level is set
to High. High security will also prevent remote game servers from “seeing” your
computer. To solve these problems, you can:
! Change your Internet Zone security level to Medium, or
! Add the IP address of the game server you’re connecting to the Trusted Zone. The
game manufacturer’s documentation should indicate the IP address or host name of
the server.
To learn how to add a host or IP address to the Trusted Zone, see “Adding to the
Trusted Zone,” on page 47.
Trusting game servers means trusting the other players in the game. Zone Labs
security software does not protect you from attacks instigated by fellow gamers
in a trusted environment. Make sure that you understand how to configure your
browser's security for optimal protection and have the latest service packs
installed for the browser you are using.
Remote control programs

If your computer is either the host or the client of a remote access system such as
PCAnywhere or Timbuktu:
! Add the IP address(es) of the hosts or clients to which you connect to your Trusted
Zone. See “Adding to the Trusted Zone,” on page 47.
! Add the subnet of the network you are accessing remotely to your Trusted Zone. See
“Adding to the Trusted Zone,” on page 47.
! If a dynamic IP address is assigned to the remote machine, add the DHCP server
address or range of addresses to the Trusted Zone.
If your remote control client or host is on a network not under your control (for
example on a business or university LAN), perimeter firewalls or other features of
the network may prevent you from connecting. If you still have problems
connecting after following the instructions above, contact your network
administrator for assistance.
VNC programs
In order for VNC and Zone Labs security software to work together, follow the steps
below.

Appendix C: Troubleshooting Streaming media programs
1. On both the server and viewer (client) machine, do one of the following:
# If you know the IP address or subnet of the viewer (client) you will be using for
remote access, and it will always be the same, add that IP or subnet to the Trusted
Zone. See “Adding to the Trusted Zone,” on page 47.
If you do not know the IP address of the viewer, or if it will change, then give the
program access permission and server permission for the Trusted and Internet
Zones. See “Setting access permissions for new programs,” on page 74.
When prompted by VNC Viewer on the viewer machine, enter the name or IP
address of the server machine, followed by the password when prompted. You
should be able to connect.
If you enable VNC access by giving it server permission and access permission,
be sure to set and use your VNC password in order to maintain security. We
recommend adding the server and viewer IP addresses to the Trusted Zone,
rather than giving the application Internet Zone permission, if possible.
2. On the viewer (client) machine, run VNC Viewer to connect to the server machine.
Do not run in “listen mode.”
Telnet
To access a remote server via Telnet, add the IP address of that server to your Trusted Zone.
Streaming media programs

Applications that stream audio and video, such as RealPlayer, Windows Media Player,
QuickTime, etc., must have server permission for the Internet Zone in order to work
with Zone Labs security software.
To learn how to give server permission to a program, see “Granting a program
permission to act as a server,” on page 81.
Voice over IP programs

To use Voice over IP (VoIP) programs with Zone Labs security software, you must do
one or both of the following, depending on the program:
1. Give the VoIP application server permission and access permission.
2. Add the VoIP provider’s servers to the Trusted Zone. To learn the IP addresses of
these servers, contact your VoIP provider's customer support.
Web conferencing programs

If you experience problems using a Web conferencing program such as Microsoft
NetMeeting, try the following:
1. Add the domain or IP address that you connect to in order to hold the conference to
the Trusted Zone. See “Adding to the Trusted Zone,” on page 47.

Appendix C: Troubleshooting Web conferencing programs
2. Disable the conferencing program’s “Remote Desktop Sharing” option.

Appendix
Program behavior
D
This appendix provides guidance for determining whether
to allow or deny programs to perform suspicious behavior.
! “Medium-rated suspicious behavior,” on page 252

! “High-rated suspicious behavior,” on page 253
251
Appendix D: Program behavior Medium-rated suspicious behavior
Medium-rated suspicious behavior

The table below provides some information you can use to determine how to respond
to Medium-rated Suspicious Behavior alerts when they appear. The information listed
here is for your reference only. Bear in mind that some legitimate programs need to
perform the actions listed below. Whether to allow or deny suspicious program behavior
should be determined by your individual situation. (Note that you can configure Zone
Labs security software to prevent several of these behaviors automatically. For details,
see “Configuring OSFirewall protection,” on page 68.)
Detected Behavior What this means What to do
Modifications of the startup A program is setting itself to Unless you are installing a
directory run each time your computer program, you should deny
is started. this action, as it could be
spyware.
Modification of browser Your default browser search is Unless you are currently
search defaults being modified. modifying your browser’s
search function, you should
deny this action.
Modification of browser page Your default browser home Unless you are changing
defaults page is being modified. your home page, you should
deny this action.
Unloading of driver A program is trying to trying There are no legitimate rea-
to unload another program’s sons for this behavior. You
driver. should deny this action.
Table D-1: Medium-rated suspicious behavior guide

Appendix D: Program behavior High-rated suspicious behavior
High-rated suspicious behavior

The table below provides some information you can use to determine how to respond
to High-rated Suspicious Behavior alerts when they appear. The information listed here
is for your reference only. Bear in mind that few legitimate programs need to perform
the actions listed below.
Transmission of DDE Program is trying to send This behavior is often used

(Dynamic Data Exchange) DDE input to another pro- to open URLs in Internet
input gram, which could allow the Explorer. If the application
program to gain Internet performing the behavior is
access or to leak information. known and trusted, it is
probably safe to allow the
behavior. Otherwise, click
Deny.
Sending Windows messages A program is trying to send a A program could be trying
message to another program. to force the another pro-
gram to perform certain
functions. Unless you are
installing software that
needs to communicate with
another program, you
should deny this action.
A program is trying to kill A program is trying to termi- A program could be trying
another program. nate another program to kill a trusted program.
Unless you have just used
Task Manager to end a pro-
gram or process, or have
just installed software that
requires a reboot of your
computer, you should deny
this action.
Invoking open process/thread A program is trying to control Unless the program per-
another program. It is legiti- forming the behavior is
mate for system applications trusted, you should deny
to do this. this action.
Monitoring keyboard and A program is attempting to Unless you are running a
mouse input monitor your keyboard strokes specialized program that
and mouse input. needs to monitor this activ-
ity in order to function,
such as narration software,
you should deny this action.
Table D-2: High-rated suspicious behavior guide

Remote control of keyboard A program is attempting to Unless you are running

and mouse input remotely control your key- remote-access software,
board and mouse. such as PC Anywhere or
VNC, you should deny this
action.
Installation of driver A program is attempting to Unless you are installing
load a driver. Loading a driver anti-virus, anti-spyware,
allows a program to do any- firewall, VPN, or other sys-
thing it wants on your com- tem tools, you should deny
puter. this action.
Modification of physical A program may be attempting Unless you are running
memory to modify or read information gaming, video, or system
owned by another program. utility software, you should
deny this action.
Injection of code into a pro- A program is attempting to Unless you are running
gram or system service inject code into another pro- highly specialized software
gram, which can be used to to change the appearance
disable the program or ser- or behavior of a program,
vice. you should deny this action.
Modifying network parame- A program is attempting to Unless you are running
ters change your network settings, TCP/IP tuning software, you
possibly to re-route you to should deny this action.
dangerous Web sites and
monitor your Web traffic.
Launching an unknown or A program is attempting to Unless a program you are
bad program from a good one modify another program. using has a reason to open
another program (such as a
Word document with a link
to a browser, or an IM pro-
gram with links to other
programs) you should deny
this action.
Accessing system registry The process is trying to mod- This behavior is usually
ify registry settings. blocked automatically. If
you have program control
set to Manual mode, deny
this action.
Deletion of a run key A program was trying to If the program was set to
delete a run key entry. launch on start-up but was
cancelled, it will delete the
run key. In other cases, you
should deny this action.

Modification of ZoneAlarm A program is trying to modify Unless you are upgrading

program the ZoneAlarm program, pos- the ZoneAlarm client, deny
sibly to prevent it from run- this action.
ning, or performing product
updates.

Program behavior High-rated suspicious behavior

Glossary
1394
A very fast external bus standard that supports data transfer rates of up to
400Mbps (in 1394a) and 800Mbps (in 1394b). Products supporting the 1394
standard go under different names, depending on the company. Apple, which
originally developed the technology, uses the trademarked name FireWire.
3DES
Short for Triple Data Encryption Standard, a standards-based symmetric-key
encryption method using a 168-bit key. 3DES is a more robust variation of the
older 56-bit DES encryption standard.
ACCESS PERMISSION
Access permission allows a program on your computer to initiate
communications with another computer. This is distinct from server
permission, which allows a program to “listen” for connection requests from
other computers. You can give a program access permission for the Trusted
Zone, the Internet Zone, or both.
ACT AS A SERVER
A program acts as a server when it “listens” for connection requests from other
computers. Several common types of applications, such as chat programs, e-
mail clients, and Internet Call Waiting programs, may need to act as servers to
operate properly. However, some hacker programs act as servers to listen for
instructions from their creators. Zone Labs security software prevents
programs on your computer from acting as servers unless you grant server
permission.
ACTIVEX CONTROLS
A set of technologies developed by Microsoft that can be automatically
downloaded and executed by a Web browser. Because ActiveX controls have
full access to the Windows operating system, they have the potential to damage
software or data on a user’s machine.
AD BLOCKING
A Zone Labs security software feature that enables you to block banner, pop-
up and other types of advertisements.
ADVANCED PROGRAM CONTROL

Advanced Program Control is an advanced security feature that tightens your
security by preventing unknown programs from using trusted programs to

Glossary
access the Internet.
ANIMATED AD
An advertisement that incorporates moving images.
BANNER AD
An ad that appears in a horizontal banner across a Web page.
BLOCKED ZONE
The Blocked Zone contains computers you want no contact with. Zone Labs
security software prevents any communication between your computer and the
machines in this Zone.
BLUE COAT
Blue Coat is a software development and application services company that
filters, monitors and reports on Internet use and activity. ZoneAlarm Pro’s
Parental Control feature uses Blue Coat content categories to determine
whether access to Web sites you visit will be allowed or blocked.
BOOT SECTOR VIRUS

Type of computer virus that infects the first or first few sectors of a computer
hard drive or diskette drive allowing the virus to activate as the drive or diskette
boots.
CACHE CLEANER
Privacy feature that enables you to remove unwanted files and cookies from
your computer on demand, or on a scheduled basis.
CLEAR TEXT
Clear text, also referred to as “plain text,” is data that is being transmitted in
textual form and is not encrypted. Because the data is not encrypted, it could
be intercepted and read by others during transmission.
COLLABORATIVE FILTER
A feature of Zone Labs security software’s junk e-mail filter. Collaborative
filtering uses information extracted from junk e-mail reported by you and other
Zone Labs security software users to determine the probability that new
messages from unknown senders are spam.
COMPONENT
A small program or set of functions that larger programs call on to perform
specific tasks. Some components may be used by several different programs
simultaneously. Windows operating systems provide many component DLLs
(Dynamic Link Libraries) for use by a variety of Windows applications.
COMPONENT LEARNING MODE

The period after installation when program control is set to Medium. When in
component learning mode, Zone Labs security software can quickly learn the
MD5 signatures of many frequently used components without interrupting

Glossary
your work with multiple alerts.
COOKIE
A small data file used by a Web site to customize content, remember you from
one visit to the next, and/or track your Internet activity. While there are many
benign uses of cookies, some cookies can be used to divulge information about
you without your consent.
COOKIE CONTROL
Privacy feature that allows you to prevent cookies from being stored on your
computer.
DES
Short for Data Encryption Standard, a popular symmetric-key encryption
method using a 56-bit key. DES has been supplanted by 3DES, a more robust
variation of DES.
DESTRUCTIVENESS
Refers to the extent of the damage caused by a virus. The Destructiveness
rating refers to the degree to which the damage can be reversed. A low
Destructiveness rating would indicate that the scale of the interruption was
small, and that any damage done could be reversed. A Medium or High
Destructiveness rating would indicate that the damage caused may be
irreversible, or that it caused a widespread interruption.
DHCP (DYNAMIC HOST CONFIGURATION PROTOCOL)

A protocol used to support dynamic IP addressing. Rather than giving you a
static IP address, your ISP may assign a different IP address to you each time
you log on. This allows the provider to serve a large number of customers with
a relatively small number of IP addresses.
DHCP (DYNAMIC HOST CONFIGURATION PROTOCOL) BROADCAST/MULTICAST

A type of message used by a client computer on a network that uses dynamic
IP addressing. When the computer comes online, if it needs an IP address, it
issues a broadcast message to any DHCP servers which are on the network.
When a DHCP server receives the broadcast, it assigns an IP address to the
computer.
DIAL-UP CONNECTION
Connection to the Internet using a modem and an analog telephone line. The
modem connects to the Internet by dialing a telephone number at the Internet
Service Provider’s site. This is in distinction to other connection methods, such
as Digital Subscriber Lines, that do not use analog modems and do not dial
telephone numbers.
DLL (DYNAMIC LINK LIBRARY)

A library of functions that can be accessed dynamically (that is, as needed) by

Glossary
a Windows application.
DNS (DOMAIN NAME SERVER)

A data query service generally used on the Internet for translating host names
or domain names (like www.yoursite.com) into Internet addresses (like
123.456.789.0).
DRIVER
A program that controls a device. In Windows environments, drivers often
have a.DRV extension. A driver acts like a translator between the device and
programs that use the device. Each device has its own set of specialized
commands that only its driver knows. In contrast, most programs access
devices by using generic commands. The driver accepts generic commands
from a program and then translates them into specialized commands for the
device.
EMBEDDED OBJECT
An object such as a sound file or an image file that is embedded in a Web page.
ENCRYPTION
The process of transmitting scrambled data so that only authorized recipients
can unscramble it. For instance, encryption is used to scramble credit card
information when purchases are made over the Internet.
FOREIGN LANGUAGE FILTERS

A feature of Zone Labs security software’s junk e-mail filter. Foreign language
filters block e-mail containing non-European languages.
GAME MODE
Game Mode temporarily suppresses most Zone Labs security software scans,
product updates, and alerts, so that you can play games on your computer with
fewer interruptions. Game Mode lets you temporarily allow or deny all
program permission requests, so that Zone Labs security software can answer
such requests automatically without displaying alerts.
GATEWAY
In networking, a combination of hardware and software that links two
different types of networks. For example, if you are on a home or business
Local Area Network (LAN), a gateway enables the computers on your network
to communicate with the Internet.
HASH
A hash is a number generated by a formula from a string of text in such a way
that it is unlikely that some other text would produce the same value. Hashes
are used to ensure that transmitted messages have not been tampered with.
HEARTBEAT MESSAGES
Messages sent by an Internet Service Provider (ISP) to make sure that a dial-up
connection is still in use. If it appears a customer is not there, the ISP might

Glossary
disconnect her so that her IP address can be given to someone else.
HIGH-RATED ALERTS
An alert that is likely to have been caused by hacker activity. High-rated
Firewall alerts display a red band at the top of the alert pop-up. In the Log
Viewer, you can see if an alert was high-rated by looking in the Rating column.
HTTP REFERRER HEADER FIELD

An optional field in the message that opens a Web page, containing
information about the “referring document.” Properly used, this field helps
Web masters administer their sites. Improperly used, it can divulge your IP
address, your workstation name, login name, or even (in a poorly-implemented
e-commerce site) your credit card number. By selecting Remove Private
Header information in the Cookies tab, you prevent this header field from
transferring any information about you.
ICMP (INTERNET CONTROL MESSAGE PROTOCOL)

An extension of the Internet Protocol that supports error control and
informational messages. The “ping” message is a common ICMP message used
to test an Internet connection.
ICS (INTERNET CONNECTION SHARING)

ICS is a service provided by the Windows operating system that enables
networked computers to share a single connection to the Internet.
INDEX.DAT
Index.dat files keep copies of everything that was in your Temporary Internet,
Cookies, and History folders even AFTER these files have been deleted.
INFORMATIONAL ALERTS
The type of alerts that appear when Zone Labs security software blocks a
communication that did not match your security settings. Informational alerts
do not require a response from you.
INTERNET ZONE
The Internet Zone contains all the computers in the world—except those you
have added to the Trusted Zone or Blocked Zone.
Zone Labs security software applies the strictest security to the Internet Zone,
keeping you safe from hackers. Meanwhile, the medium security settings of the
Trusted Zone enable you to communicate easily with the computers or
networks you know and trust—for example, your home network PCs, or your
business network.
IP ADDRESS
The number that identifies your computer on the Internet, as a telephone
number identifies your phone on a telephone network. It is a numeric address,
usually displayed as four numbers between 0 and 255, separated by periods.

Glossary
For example, 172.16.100.100 could be an IP address.
Your IP address may always be the same. However, your Internet Service
Provider (ISPs) may use Dynamic Host Configuration Protocol (DHCP) to
assign your computer a different IP address each time you connect to the
Internet.
ISP (INTERNET SERVICE PROVIDER)

A company that provides access to the Internet. ISPs provide many kinds of
Internet connections to consumers and business, including dial-up (connection
over a regular telephone line with a modem), high-speed Digital Subscriber
Lines (DSL), and cable modem.
JAVA APPLET
A small Internet-based program written in Java that is usually embedded in an
HTML page on a Web site and can be executed from within a browser.
JAVASCRIPT
A popular scripting language that enables some of the most common
interactive content on Web sites. Some of the most frequently used JavaScript
functions include Back and History links, changing images on mouse-over, and
opening and closing browser windows. Zone Labs security software default
settings allow JavaScript because it is so common and because most of its uses
are harmless.
KEYLOGGER
A form of spyware that records keystrokes on your computer, often sending
the data to a remote server. Any text input using the keyboard, including credit
card numbers or other sensitive personal information could be gathered by a
keylogging program and used to commit identity theft.
MAIL SERVER
The remote computer from which the e-mail program on your computer
retrieves e-mail messages sent to you.
MD5 SIGNATURE
A digital “fingerprint” used to verify the integrity of a file. If a file has been
changed in any way (for example, if a program has been compromised by a
hacker), its MD5 signature will change as well.
MEDIUM-RATED ALERT
An alert that was probably caused by harmless network activity, rather than by
a hacker attack.
MESSAGE FILTERS
A feature of Zone Labs security software’s junk e-mail filter. Message Filters
use heuristic rules to analyze e-mail for characteristics common to various

Glossary
types of junk e-mail.
MIME-TYPE INTEGRATED OBJECT

An object such as an image, sound file, or video file that is integrated into an
e-mail message. MIME stands for Multipurpose Internet Mail Extensions.
MOBILE CODE
Executable content that can be embedded in Web pages or HTML e-mail.
Mobile code helps make Web sites interactive, but malicious mobile code can
be used to modify or steal data, and for other malevolent purposes.
MOBILE CODE CONTROL

A Zone Labs security software feature that enables you to block active controls
and scripts on the Web sites you visit. While mobile code is common on the
Internet and has many benign uses, hackers can sometimes use it for
malevolent purposes.
NETBIOS (NETWORK BASIC INPUT/OUTPUT SYSTEM)

A program that allows applications on different computers to communicate
within a local network. By default, Zone Labs security software allows
NetBIOS traffic in the Trusted Zone, but blocks it in the Internet Zone. This
enables file sharing on local networks, while protecting you from NetBIOS
vulnerabilities on the Internet.
OPENSSL
OpenSSL is an open source security protocol based on the SSL library
developed by Eric A. Young and Tim J. Hudson.
PACKET
A single unit of network traffic. On “packet-switched” networks like the
Internet, outgoing messages are divided into small units, sent and routed to
their destinations, then reassembled on the other end. Each packet includes the
IP address of the sender, and the destination IP address and port number.
PASS-LOCK
When the Internet Lock is engaged, programs given pass-lock permission can
continue accessing the Internet. Access permission and server permission for
all other programs is revoked until the lock is opened.
PERSISTENT COOKIE
A cookie put on your hard drive by a Web site you visit. These cookies can be
retrieved by the Web site the next time you visit. While useful, they create a
vulnerability by storing information about you, your computer, or your
Internet use in a text file.
PERVASIVENESS
Pervasiveness refers to a virus’ potential to spread. A boot sector virus that
spreads through the manual sharing of floppy disks is given a low
Pervasiveness rating, while a worm that has the ability to send itself out to a

Glossary
large number of victims is given a high pervasiveness rating.
PHISHING
The act of sending a deceptive e-mail that falsely claims to be from a legitimate
business or agency. A phishing e-mail attempts to deceive recipients into
providing personal information that can then be used for fraudulent purposes.
PHYSICAL MEMORY
The memory hardware (normally RAM) installed in a computer.
PING
A type of ICMP message (formally “ICMP echo”) used to determine whether
a specific computer is connected to the Internet. A small utility program sends
a simple “echo request” message to the destination IP address, and then waits
for a response. If a computer at that address receives the message, it sends an
“echo” back. Some Internet providers regularly “ping” their customers to see
if they are still connected.
POP-UNDER AD
An ad that appears in a new browser window that opens under the window
you're looking at, so you don't see the ad until you close the original browser
window.
POP-UP AD
An ad that appears in a new browser window that 'pops up' in front of the
window you're looking at.
PORT
A channel associated with the use of TCP or UDP. Some ports are associated
with standard network protocols; for example, HTTP (Hypertext Transfer
Protocol) is traditionally addressed to port 80. Port numbers range from 0 to
65535.
PORT SCAN
A technique hackers use to find unprotected computers on the Internet. Using
automated tools, the hacker systematically scans the ports on all the computers
in a range of IP addresses, looking for unprotected or “open” ports. Once an
open port is located, the hacker can use it as an access point to break in to the
unprotected computer.
PRIVACY ADVISOR
A small display that shows you when Zone Labs security software blocks
cookies or mobile code, and enables you to un-block those elements for a
particular page.
PRIVATE NETWORK
A home or business Local Area Network (LAN). Private networks are placed

Glossary
in the Trusted Zone by default.
PRODUCT UPDATE SERVICE

Zone Labs subscription service that provides free updates to Zone Labs
security software. When you purchase Zone Labs security software, you
automatically receive a year's subscription to product update service.
PROGRAMS LIST
The list of programs to which you can assign Internet access and server
permissions. The list is shown in the Programs tab of the Program Control
panel. You can add programs to the list, or remove programs from it.
PROTOCOL
A standardized format for sending and receiving data. Different protocols
serve different purposes; for example SMTP (Simple Mail Transfer Protocol)
is used for sending e-mail messages; while FTP (File Transfer Protocol) is used
to send large files of different types. Each protocol is associated with a specific
port, for example, FTP messages are addressed to port 21.
PUBLIC NETWORK
A large network, such as that associated with an ISP. Public networks are
placed in the Internet Zone by default.
QUARANTINE
A method used to render harmless suspicious attachments, viruses, or spyware.
SCRIPT
A series of commands that execute automatically, without the user intervening.
These usually take the form of banners, menus that change when you move
your mouse over them, and pop-up ads.
SECURITY LEVELS
The High, Med., and Off settings that dictate the type of traffic allowed into or
out of your computer.
SELF-SIGNED CERTIFICATE
A public-key certificate for which the public key bound by the certificate and
the private key used to sign the certificate are components of the same key pair,
which belongs to the signer.
SERVER PERMISSION
Server permission allows a program on your computer to “listen” for
connection requests from other computers, in effect giving those computers
the power to initiate communications with yours. This is distinct from access
permission, which allows a program to initiate a communications session with
another computer.
SESSION COOKIE
A cookie stored in your browser’s memory cache that disappears as soon as
you close your browser window. These are the safest cookies because of their

Glossary
short life-span.
SHA1
An algorithm used for creating a hash of data.
SKYSCRAPER AD
An ad that appears in a vertical column along the side of a Web page.
SMARTDEFENSE ADVISOR
Zone Labs SmartDefense Advisor is an online utility that enables you to
instantly analyze the possible causes of an alert, and helps you decide whether
to respond Allow or Deny to a Program alert. To use SmartDefense Advisor,
click the More Info button in an alert pop-up. Zone Labs security software
sends information about your alert to SmartDefense Advisor. SmartDefense
Advisor returns an article that explains the alert and gives you advice on what,
if anything, you need to do to ensure your security.
SPAM
An inappropriate attempt to use a mailing list or USENET or other networked
communications facility as if it were are broadcast medium by sending
unsolicited messages to a large number of people.
STEALTH MODE
When Zone Labs security software puts your computer in stealth mode, any
uninvited traffic receives no response--not even an acknowledgement that your
computer exists. This renders your computer invisible to other computers on
the Internet, until permitted program on your computer initiates contact.
TCP (TRANSMISSION CONTROL PROTOCOL)

One of the main protocols in TCP/IP networks, which guarantees delivery of
data, and that packets are delivered in the same order in which they were sent.
THIRD PARTY COOKIE

A persistent cookie that is placed on your computer, not by the Web site you
are visiting, but by an advertiser or other “third party.” These cookies are
commonly used to deliver information about your Internet activity to that third
party. Also known as tracking cookies.
TROJAN HORSE
A malicious program that masquerades as something useful or harmless, such
as a screen saver. Some Trojan horses operate by setting themselves up as
servers on your computer, listening for connections from the outside. If a
hacker succeeds in contacting the program, he can effectively take control of
your computer. This is why it's important to only give server permission to
programs you know and trust. Other Trojan horses attempt to contact a
remote address automatically.
TRUEVECTOR SECURITY ENGINE

The primary component of Zone Labs security software security. It is the

Glossary
TrueVector engine that examines Internet traffic and enforces security rules.
TRUSTED ZONE
The Trusted Zone contains computers you trust and want to share resources
with.
For example, if you have three home PCs that are linked together in an
Ethernet network, you can put each individual computer or the entire network
adapter subnet in the Zone Labs security software Trusted Zone. The Trusted
Zone's default medium security settings enable you to safely share files,
printers, and other resources over the home network. Hackers are confined to
the Internet Zone, where high security settings keep you safe.
UDP (USER DATAGRAM PROTOCOL)

A connection-less protocol that runs on top of IP networks and is used
primarily for broadcasting messages over a network.
WEB BUG
An image file, often 1x1 pixel, designed to monitor visits to the page (or HTML
e-mail) containing it. Web bugs are used to find out what advertisements and
Web pages you have viewed. If you have blocked web bugs using Privacy
control, blank boxes will appear in place of the web bugs.
WILD
Refers to a virus that is spreading as a result of normal day-to-day operations
on and between the computers of unsuspecting users. The Wild rating refers
to the number of customer reports about this virus. A low Wild rating will
reflect a low number of customer reports, whereas a Medium or High Wild
rating will reflect a more substantial number of customer reports.

Index
SYMBOLS alerts
high-rated 204
.zl6 file extension 133
ID Lock 220
Informational 204
A Internet Lock 207
logging of 159
Access control medium-rated 204
about 192 New Network 221
setting options for 200 OSFirewall 218
access permission preferences for 75
and anti-virus software 244 Program
browser software and 244 Advanced Program alert 215
configuring for programs 7 Automatic VPN Configuration alert 35, 215
e-mail programs and 246 Blocked Program 206
for Trusted Zone 19 Changed Program alert 211
FTP programs and 247 MailSafe 116
games and 247 Manual Action Required alert 216
granting to programs 38, 65 New Program 210, 218, 219
password and 74 Repeat Program alert 164
setting for ports 51 Server Program alert 65, 164, 207, 245
act as server 19 reference 203–222
defined 257 responding to 20, 35
Action stopping them while gaming 162–163
in expert rule 55, 61 Alt 59
in Log Viewer 49, 166 Amazon protection profile, creating 26
Active Programs area 14 animated ads
activist sites, blocking 188 blocking 137
ad blocking filling void left by 144
about 136 answering machine programs 246
adding antivirus protection
custom ports 51 status, viewing 109
expert rules to programs 87 antivirus protection feature 89–113
networks to the Trusted Zone 44 anti-virus software
programs to the programs list 79 e-mail protection and 244
to the Blocked Zone 48 antivirus software
to the Trusted Zone 47 e-mail protection and 244
wireless networks to the Internet Zone 45 AOL
Address 59 in expert rules 58
Address Mask Reply and Request 59 Instant Messager, using 245
Address Resolution Protocol, enabling 43 Privacy Site List and 141
adult content, blocking 185 AOL Instant Messenger 192
Advanced Program alert 215 Application Interaction 82
adware 108 Application Interaction Control 68
archive files
viruses and 101
asterisks, use of 176
Attachments List
accessing 118
editing 118

Index
audio transmission, blocking 200 clear text password 220

Authenticating Header (AH) Protocol 35 closing the Zone Labs security software application 15
AutoComplete forms, clearing data see Cache Cleaner code injection see suspicious behavior
automatic lock types of 254
enabling 70 collaborative filter 126
setting options for 71 color-scheme, changing 24, 25
Automatic VPN Configuration alert 215 components
managing 85
VPN-related 35
B Components List 85
backing up and restoring security settings 23 contributing fraudulent e-mail 126
banner ads contributing junk e-mail 125
blocking 137 Control Center 12
filling void left by 144 Control Center,overview 12–14
Blocked Intrusions area 16 cookie control
Blocked Program alert 206 about 136
Blocked Zone cookies 108
about 18 blocking 136, 142–143
adding to 48 keeping and removing 148
blocking setting an expiration date for 143
ads 144–145 CreateProcess 82
cookies 142–143 custom ports, adding 51
e-mail attachments 116
embedded objects 146
executable URLs 223 D
file transfers 223 dashboard
inappropriate Web content 185–189 keyboard shortcut for 228
packet fragments 43 using 13
ports 50–52 Date/Time
programs 43 in Log Viewer 166
scripts 146 Day/Time
video transmission 223 adding to expert rule 56
Web content by category 183–189 ranges, creating group of 60
Blue Coat 182, 183 deep-inspection scan 97
Blue Coat, mentioned 183 default security settings 199, 200
browser cache, cleaning 149, 189 DefenseNet 7
browser defaults, modifying 252 destination
browser help object 108 in expert rules 53, 55, 56
browser software, using 244 dialer 108
dial-up connection
configuring 222
C disabling
Cache Cleaner 147–150 Windows Firewall 43
about 136, 147 display preferences, setting 24
browser cleaning options, setting 148–150 Domain Name Server (DNS)
hard drive cleaning options, setting 148 defined 260
running manually 147 in expert rules 59
categories incoming messages
allowing and blocking 183, 185–189 determining source of 166
Cerberian, mentioned 182 outgoing messages
Challenged Mail 129 default port permissions for 50
Changed Program alert 211 determining destination of 49, 166
Changes Frequently 80 required VPN resources 37
chat conversations, protection of 192 troubleshooting Internet connection 239
chat programs Driver event 73
Server Program alert and 245 drivers, loading 254
using 245
check for update settings 22

Index
Dynamic Host Configuration Protocol (DHCP) messages file and printer sharing
default port permissions for 50 enabling 33, 221
in Day/Time group 59 network security and 44
remote control programs and 248 server access and 214
Dynamic Real-time rating (DRTR) 184 troubleshooting 246
File event 73
file fragments, removing see Cache Cleaner 148
E file transfer, blocking 223
eBay protection profile, creating 26 filter options, setting 83
EBay, blocking 187 filtering Web content 185
echo request Firewall alert 153
in expert rules 59 determining source of 204
e-mail logging of 164
fraudulent, reporting 126 responding to 204
junk, reporting 125 firewall protection 39–62
E-mail Filter toolbar 123 about 40
e-mail protection 115–122 advanced security options 42–48
about 116 blocking and unblocking ports 50
Attachments List 118 expert rules and 53–54
inbound 116, 117 keeping current 17
outbound 117 setting security level for 41
status of 244 FireWire 43
embedded objects, blocking 146 foreign language filters 126
Encapsulating Security Payload (ESP) protocol formatting log file 164
VPN protocols and 35, 43 forms data, removing from cache see Cache Cleaner
Encryption 192 fragments, blocking 43
about 196 fraudulent e-mail, see junk e-mail filter
enabling and disabling 197 Fraudulent Mail folder 126
examples 196–197 FTP
setting options for 200 programs, using 246
Eudora, infected e-mail and 133 protocols, adding to expert rules 58
event logging full system scan 97
about 159
customizing 164
turning on and off 160 G
Execution event 73 Game Mode 162–163
expert firewall rules games
about 53 online, blocking access to 186
creating 55–56 stopping alerts while playing 162–163
editing 62 using with Zone Labs security software 247–248
enforcement of 53–54 gaming software
for programs 87 suspicious behavior and 254
managing 61–62 gateway
ranking 61 adding to the Trusted Zone 47
tracking options for 62 as Location type 57
expiration date forwarding or suppressing alerts 42
setting for cookies 143 Internet Connection Sharing (ICS) and 34
subscription services and 17 default port permissions 50
security enforcement of 42
Generic Routing Encapsulation (GRE) protocol
F mentioned 43
Feature Control VPN protocols and 35, 38
about 194 glamour and lifestyle sites, blocking 187
mentioned 192 government sites, blocking 187
setting options for 200 groups
adding to expert rules 57–60

Index
H Inbound Protection
about 194–196
Hacker ID
mentioned 192
about 170
setting options for 200
hard drive, cleaning 148
Inbound/Outbound traffic indicator 13
harmful links, removing 223
index.dat files, removing see Cache Cleaner
heartbeat messages
infected files
allowing 239
risk assessment of 100, 105
defined 260
Information reply 59
dial-up connection, troubleshooting 239
Information request 59
High security setting
Informational alerts 153, 204
about 18
installing
ad blocking and 137
ZoneAlarm 4
alert events shown in 160
installing Zone Labs security software 1–5
allowing uncommon protocols 38
Instant Messaging services
cookie control 137
blocking access to 192
default port permissions in 50–51
encrypting traffic 196
file and printer sharing 33
Intelligent quick scan 97
firewall protection and 41
Internet auction sites, blocking 187
for ID Lock 174
Internet Connection Sharing (ICS)
for Internet Zone 41
alert options for 208
for Trusted Zone 41
enabling 34
logging options and 160
setting security options for 42
privacy protection and 137
Internet Control Messaging Protocol (ICMP)
program control and 67
default port permissions for 50
high-rated alerts 204
in expert firewall rules 53
High-rated Suspicious Behavior alert 218
message types 59
home network
troubleshooting Internet connection 239
Firewall alerts and 204
Internet Explorer
host file, locking 43
cache, cleaning 149
host name
granting access permission to 245
adding to Trusted Zone 237
privacy protection and 137
in list of traffic sources 46
setting cleaning options for 148
in Privacy Site list 141
Internet Key Exchange (IKE) protocol
Hotmail, special folders 123, 131
VPN protocols and 35
humor sites, blocking 187
Internet Lock 14, 15
Hypertext Transfer Protocol (HTTP)
icon 15
Internet Lock alerts 207
Internet Relay Chat, blocking 201
I Internet Service Provider (ISP)
heartbeat messages from 13, 239
ID Lock 171–179 in alert details 155
overview 172 in list of traffic sources 46
see also myVAULT Internet Zone 14
ID Lock alert 220 adding networks to automatically 44, 45
Identity Protection Center 171, 180 networks, adding to automatically 30
identity theft permissions and 19
protection from 171, 180 IP address
ie3.proxy.aol.com 141 adding to the Trusted Zone 33, 47
IGMP determining network type from 30, 31
default port permissions for 50 hiding in submissions to Zone Labs 25
in expert rules 53, 87 in expert rules 53
IM Security in list of traffic sources 46
overview 192–198 IP Security (IPSec) protocol
IMAP4 VPN protocols and 35
in expert rules 58 isafe.exe 134

Index
J log entries
about 159
Java applets, blocking 146
archiving 169
JavaScript
expert rules and 87
e-mail protection and 116
fields in 168
junk e-mail filter
for Program alerts 164
and privacy 129
for programs 164
automatic reporting option 130
formatting 164
blocking company names 124
options for 164
blocking mailing lists 124
viewing 165, 167
blocking senders 123
Log Viewer
Challenged Mail folder 129
accessing 165
collaborative filter 126
using 201–202
contributing junk e-mail 125
Lookup button 57
foreign language filters 126
loopback adaptor
Fraudulent Mail folder 126
adding to the Trusted Zone 35
Hotmail, and 123, 131
Low security setting
Junk Mail folder 125
Changes Frequently option 80
message filtering options 126
default port permissions for 50–51
message filters 126
file and printer sharing and 41
protecting privacy 125, 126
program control and 67
reporting fraudulent e-mail 125, 126, 130
Zones and 41
reporting junk e-mail 125
lsass.exe 20
reports 132
special Outlook folders 123–132
toolbar 123 M
wireless device support 130
mail servers, connecting to 33
Junk E-mail Filter, see junk e-mail filter 123
mail trash, cleaning see Cache Cleaner
Junk Mail folder 125
MailFrontier 125
MailSafe
K outbound protection
sender’s address, verifying 27
keeping cookies 149
MailSafe alert 116, 205
keyboard and mouse
MD5 Signature 80
monitoring 253
defined 262
keyboard shortcuts 225–232
Medium security setting
keylogger 108
about 18
killing a program 79
ad blocking and 137
alert events 160
L alerts and 204, 213
customizing 19
Layer 2 Tunneling protocol (L2TP) default port permissions for 50–51
VPN protocols and 35 file and printer sharing and 33
license key ID Lock and 174
updating 27 Internet Zone and 41, 239, 246
Lightweight Directory Access protocol (LDAP) logging options and 160
VPN protocols and 35 networking and 33
local servers, blocking 43 port access and 51
Location 57 privacy protection and 137
locations program control and 67, 246
adding to expert firewall rules 56 resource sharing and 237
creating groups of 57 Trusted Zone and 41, 47, 236
lock icon uncommon protocols and 43
in System Tray 15 Medium security setting, defined 199
lock mode, specifying 71 medium-rated alerts 204
message encryption 192
Message event 73
message filters 126
military sites, blocking 187

Index
mime-type integrated objects Outlook, and junk e-mail filter 123

blocking 146
defined 263
mobile code control P
about 136 packet
customizing 141, 146 defined 263
Module event 73 expert firewall rules 53
More Info button 153, 154, 156, 157, 158, 214 in alerts 153
keyboard shortcut for 228, 232 source of
MP3 sites, blocking 187 determining 168
MSN Messenger 192 types, blocking 43
My Computer 55 parameter problem
myVAULT 175–177 in expert rules 59
adding data to 175 Parental Control 181–189
editing and removing data 177 about 182
allowing and blocking categories 185–189
enabling 183
N setting preferences for 184
NetBIOS setting timeout options for 183
default port permissions for 50 Smart Filtering and 183
defined 263 pass-lock permission
firewall alerts and 204 granting to a program 84
heartbeat messages and 239 passwords
High security setting and 41 clearing from cache 149
in expert firewall rules 58 creating 22
network visibility and 236 Program Control and 74
Netscape VNCviewer and 249
cache, cleaning 149 pay-to-surf sites, blocking 187
removing cookies 149 PC Anywhere
setting cleaning options for 148 suspicious behavior and 254
version 4.73 245 PCAnywhere see remote control programs, using
Network Configuration Wizard pencil icon 140
about 30 permission
disabling 31 pass-lock 14, 70
Network News Transfer Protocol (NNTP) 58 passwords and 22
network resources, sharing 30 server 19
network security options, setting 44 persistent cookies 137
network settings setting an expiration date for 143
setting 44 phishing 125
Networks indicator 13, 14 Physical Memory event 73
New Network alert 221 physical memory, changes to see suspicious
New Program alert 210, 218, 219 types of 254
news and media sites, blocking 187 ping messages
allowing in Internet Zone 239
and alerts 204
O default port permissions for 50
OpenGL Point-to-Point Tunneling Protocol (PPTP)
and system crash 247 VPN protocols and 35
OpenProcess 82 policy 69
OSFirewall POP3
configuration 68–69 in expert firewall rules 58
OSFirewall events ports
types of 73 1394 43
Outbound MailSafe protection adding 51
customizing 121–122 blocking and unblocking 50–51
enabling 117 default permissions for 50
sender’s address, verifying 27 firewall protection and 40
Outbound Protection area 17 High security setting and 41

Index
preferences protocols
for firewall protection 42 creating group of 57
for Parental Control 184 default permissions for 50
for Program Control 75 firewall protection and 43
keyboard shortcut 230 in expert firewall rules 53
load at startup 238 in expert rules 43
preferences, setting 24 mail 33
printers see network resources, sharing VPN 35, 38
Privacy Advisor proxy server
using 139 avoidance systems, blocking access to 187
Privacy Protection troubleshooting Internet Connection 238
ad blocking public network
customizing 144–145 defined 265
setting level for 137 Network Configuration Wizard and 30
Cache Cleaner 147–150
running manually 147
cookie control 142–143 Q
customizing 142–143 quarantine
setting level for 137 icon 205
enabling per program 137 Inbound MailSafe protection and 116
mobile code control opening attachments 120, 244
customizing 146 setting for attachment types, changing 118
enabling and disabling 137
setting levels for 137
Privacy Site List R
accessing 140 range of IP addresses
ad blocking software and 140 adding to the Trusted Zone 47
adding Web sites to 141 in expert firewall rules 55
AOL and 141 ranking expert firewall rules 54, 61
Privacy Site list 140 Real Networks
private network in expert firewall rules 58
defined 264 redirect 59
Network Configuration Wizard and 30 Registry event 73
virtual see Virtual Private Network (VPN) remote access programs
Process event 73 troubleshooting 24
Program alerts 209–215 remote control programs, using 248
responding to 69 remote host computers
Program Component alert 212 VPN configuration and 37
program components Repeat Program alert 211
managing 85–86 logging options and 164
Program Control 63–248 reporting
about 64 fraudulent e-mail 126
Internet Lock and 70 junk e-mail 125
setting level for 67 responding to alerts 20, 35, 152
Zones and 19 restoring default settings 200
program permissions 78 restoring security settings 23
programs restricting program access 79
adding to the programs List 79 risk assessment of infections 100, 105
creating expert rules for 87 router advertisement 59
stopping 79 router solicitation 59
trust level of 79 RTSP 58
programs list
accessing 76
adding and removing programs 79 S
protection level scanning for viruses 99–102
customizing 200 schedule scans 90
setting 199 screenlogger 108
scripts, blocking 146

Index
Secure Hypertext Transfer Protocol (HTTPS) 58 spy cookie 108

secured wireless network Spy Site Blocking 98
Wireless Network Configuration Wizard and 31 spyware
security components blocking spyware sites 98
customizing 200 preventing 76
managing 199 scanning for 97
security events, logging 201–202 types of 108
security settings Status tab 16
backing up and restoring 23 stealth mode
sharing with Zone Labs see DefenseNet defined 266
self-signed certificate 198 High security setting and 41
send mail permission 81 Stop button 15
Outbound MailSafe protection and 117 about 13
server permission keyboard shortcut for 227
alerts and 213 system tray icon 15
chat programs and 245 when to click 13
column in programs list 79 subnet
default for traffic types 50 adding to the Trusted Zone 47
e-mail programs and 246 entry type 46
expert rules and 87 VPN configuration and 37
file sharing programs and 246 Super access 79
games and 247 Suspicious Behavior alert 218
granting to programs 80 suspicious program behavior
streaming media programs and 249 types of 252
Voice Over Internet programs and 249 suspicous behavior
Zones and 19 types of 253
Server Program alert 65, 74, 207, 245 svchost.exe 20
logging options and 164 System area 14
services.exe 20
session cookies
blocking 142 T
High security setting and 137 Telnet 58, 249
shortcut menu 15 TFTP 59
SKIP 35 third-party cookies, blocking 143
skyscraper ads Timbuktu see remote control programs, using
filling void left by 144 time exceeded 59
Smart Filtering Timestamp, Timestamp reply 59
about 182 toolbar, E-mail Filter 123
enabling 183 traceroute 59
setting timeout options for 183 tracking options
SmartDefense 78 for expert firewall rules 55, 62
SmartDefense Advisor 204 traffic sources
about 170 default port permissions for 50
browser permission and 214 list of 46
defined 266 managing 46
setting level for 69 Transmission Control Protocol (TCP)
submitting alerts to 154, 156 default port permission for 50
SMTP in expert firewall rules 53
in expert firewall rules 59 treating viruses 95
software rendering mode 247 Trojan 65
source Trojan horse 65, 108
in expert firewall rules 53 e-mail protection and 116
keeping cookies from a 148 Program Control and 81
of traffic, determining 46, 159 protecting Zone Labs security software from 74
Spam Blocker Troubleshooting 233–240
about 192–193 TrueVector security engine 74, 238
mentioned 192 Trust Levels 78, 79
setting options for 200 Trusted access 79
spoolsv.exe 20 Trusted Sites list 178–179

Index
Trusted Zone wireless network settings

adding networks to automatically 44 setting 45
adding to 47 worm 108
Internet Connection Sharing (ICS) and 34
Networks indicator 14
networks, adding to automatically 30 Y
permissions and 19 Yahoo! Messenger 192
VPN resources, adding to 35
Z
U Zone Alarm Fraudulent Mail, see junk e-mail filter
UDP Zone Alarm Junk Mail, see junk e-mail filter, special
default port permissions for 50 Outlook folders
in expert firewall rules 53 Zone Labs security software 4
unsecured wireless network about 15
Wireless Network Configuration Wizard and 31 closing the application 15
updating software 22 file sharing programs and 246
URL history, cleaning see Cache Cleaner FTP programs and 246
URLs, blocking 201 installing 1–5
loading at startup 24
updating 17, 22
V ZoneAlarm Challenged Mail, see junk e-mail filter
video software ZoneAlarm, installing 4
suspicious behavior and 254 Zones
video transmission, blocking 200, 223 about 18
violent content, blocking 188 adding to 47–48
Virtual Private Network (VPN) firewall protection and 46
alerts 35, 215 keyboard shortcuts 226
Automatic Configuration alert 215
configuring connection 35–38, 234
Manual Action Required alert 216
troubleshooting connection 234
viruses
and archive files 101
scanning for 99–102
treating 95, 101
updating signature files 91
VNC
suspicious behavior and 254
VNC programs, using 248
voice transmission
blocking 194
example 194
VoIP programs, using 249
W
Web conferencing programs, using 249
web content, filtering 83
Who Is tab see Hacker ID
Windows 98 134
Windows Firewall, disabling 43
Windows Media
clearing history 148
in expert rules 58
winlogon.exe 20
wireless network security options, setting 45

Index

Zaclient65 User Manual

Uploaded by

Copyright:

Available Formats

Zaclient65 User Manual

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Zaclient65 User Manual

Uploaded by

Copyright:

Available Formats

User Guide for Zone Labs security software

Zone Labs, LLC.

About Zone Labs security software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiv

Chapter 1 Installation and setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

System requirements and supported software . . . . . . . . . . . . . . . . . . . . . . . 2

Installing Zone Labs security software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Upgrading from a previous version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Configuring basic options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Uninstalling Zone Labs security software . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Chapter 2 Zone Labs security software basics . . . . . . . . . . . . . . . . . . . . . . . . . 11

Tour of the Zone Labs security software Control Center . . . . . . . . . . . . . . . 12

User Guide for Zone Labs security software i

New Program alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Setting product preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Licensing, registration, and support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Chapter 3 Networking with Zone Labs security software. . . . . . . . . . . . . . . . 29

Configuring a new network connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Integrating with network services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Configuring your VPN connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Chapter 4 Firewall protection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Understanding Firewall protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Setting advanced security options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Managing traffic sources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

User Guide for Zone Labs security software ii

Viewing logged Firewall events. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Blocking and unblocking ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Understanding expert firewall rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Creating expert firewall rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Managing Expert Firewall Rules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Chapter 5 Program control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Understanding Program Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Setting general program control options . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Configuring advanced program settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Setting permissions for specific programs . . . . . . . . . . . . . . . . . . . . . . . . . 76

Setting program options for a specific program . . . . . . . . . . . . . . . . . . . . . 82

Managing program components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

User Guide for Zone Labs security software iii

Chapter 6 Spyware and Virus protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

Spyware and Virus Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

Customizing virus protection options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

Customizing spyware protection options . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Performing a virus scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

Performing a spyware scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104

Viewing virus and spyware protection status . . . . . . . . . . . . . . . . . . . . . . . 109

Chapter 7 E-mail protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115

Understanding e-mail protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116

Customizing Inbound MailSafe protection . . . . . . . . . . . . . . . . . . . . . . . . 118

Customizing Outbound MailSafe protection . . . . . . . . . . . . . . . . . . . . . . . 121

User Guide for Zone Labs security software iv

Setting Outbound MailSafe protection options . . . . . . . . . . . . . . . . . . . . . . . . . 121

Filtering junk e-mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123

Anti-virus protection for e-mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133

Chapter 8 Privacy protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135

Understanding privacy protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136

Using Privacy Advisor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139

Customizing cookie control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142

Customizing ad blocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144

Customizing mobile code control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146

Understanding Cache cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147