General

Fastener Standards ‐ BS Order

Note: The following table is provided for guidance only as there are often dimensional variations between
standards.

BRITISH STANDARD  DIN STANDARD ISO STANDARD TYPE OF FASTENER

BS EN ISO4026  DIN913  ISO4026 Hex Socket Setscrew Flat point 

BS EN ISO4027  DIN914  ISO4027 Hex Socket Setscrew Cone point 

BS EN ISO4028  DIN915  ISO4028 Hex Socket Setscrew Dog point 

BS EN ISO4029  DIN916  ISO4029 Hex Socket Setscrew Plain Cup point 

BS3692  DIN931  ISO4014 Hexagon head bolt ‐ part threaded 

BS3692  DIN933  ISO4017 Hexagon head setscrew – fully threaded

BS3692  DIN934  ISO4032 Hexagon Full Nut

BS3692  DIN439/936  ISO4035 Hexagon Lock Nut

BS4168  DIN912  ISO4762 Hex Socket Cap

BS4168  N/A  ISO7380 Hex Socket Button

BS4168  DIN7991  ISO10642 Hex Socket Countersunk 

BS4174 AB  DIN7981CZ  ISO7049CZ Self tapping pan recess pointed 

BS4174 AB  DIN7982CZ  ISO7050CZ Self tapping csk recess pointed 

BS4174 AB  DIN7983CZ  ISO7051CZ Self tapping raised csk recess pointed

BS4174 AB  N/A  N/A Self tapping Flange recess pointed 

BS4174 B  DIN7981FZ  ISO7049FZ Self tapping pan recess blunt 

BS4174 B  DIN7982FZ  ISO7050FZ Self tapping csk recess blunt 

BS4174 B  N/A  N/A Self tapping Flange recess blunt 

BS4174 B  DIN7971F  ISO1481F Self tapping pan slotted  blunt 

1 
 
 BS4174 B  DIN7972F  ISO1482F Self tapping csk slotted  blunt 

BS4174AB  DIN7971C  ISO1481C Self tapping pan slotted pointed 

BS4174AB  DIN7972C  ISO1482C Self tapping csk slotted pointed 

BS4174AB  DIN7983C  ISO1483C Self tapping raised csk slotted pointed

BS4183  DIN7985  ISO7045 Pan recess machine screw 

BS4183  DIN85  ISO1580 Pan slotted machine screw 

BS4183  DIN965  ISO7046 Countersunk recess machine screw 

BS4183  DIN963  ISO2009 Countersunk slotted machine screw 

BS4183  DIN84  ISO1207 Cheese Slotted machine screw 

BS4183  DIN966  ISO7047 Raised Csk Recess machine screw 

BS4183  DIN964  ISO2010 Raised Csk Slotted machine screw 

BS4464A  DIN7980  N/A Square sect. single coil spring washer

BS4464B  DIN127  N/A Rectangular sect. single coil spring washer

N/A  DIN7981CH  ISO7049CH Self tapping pan Phillips pointed 

N/A  DIN7982CH  ISO7050CH Self tapping csk Phillips pointed 

N/A  DIN7983CH  ISO7051CH Self tapping raised csk Phillips pointed

N/A  DIN7981FH  ISO7049FH Self tapping pan phillips blunt 

N/A  DIN6923  ISO4161 Hexagon Flange Nut

N/A  DIN928  N/A Square Weld Nut

N/A  DIN929  N/A Hexagon Weld Nut

N/A  DIN6797J  N/A Toothed lock washer – internal 

N/A  DIN6797A  N/A Toothed lock washer – external 

2 
 
Standards Cross Reference

Note: The following table is provided for guidance only as there are often dimensional variations between
standards.

TYPE OF FASTENER  BRITISH STANDARD DIN STANDARD  ISO STANDARD

Self tapping pan recess pointed  BS 4174 AB DIN7981CZ ISO7049CZ

Self tapping pan Phillips pointed  N/A DIN7981CH ISO7049CH

Self tapping csk recess pointed  BS 4174 AB DIN7982CZ ISO7050CZ

Self tapping csk Phillips pointed  N/A DIN7982CH ISO7050CH

Self tapping raised csk recess pointed BS4174 AB DIN7983CZ ISO7051CZ

Self tapping raised csk Phillips pointed N/A DIN7983CH ISO7051CH

Self tapping Flange recess pointed  BS4174 AB N/A N/A 

Self tapping pan slotted pointed  BS4174AB DIN7971C ISO1481C

Self tapping csk slotted pointed  BS4174AB DIN7972C ISO1482C

Self tapping raised csk slotted pointed BS4174AB DIN7983C ISO1483C

         

Self tapping pan recess blunt  BS4174 B DIN7981FZ ISO7049FZ

Self tapping pan phillips blunt  N/A DIN7981FH ISO7049FH

Self tapping csk recess blunt  BS4174 B DIN7982FZ ISO7050FZ

Self tapping Flange recess blunt  BS4174 B N/A N/A 

Self tapping pan slotted  blunt  BS4174 B DIN7971F ISO1481F 

Self tapping csk slotted  blunt  BS4174 B DIN7972F ISO1482F 

         

Hexagon head bolt ‐ part threaded BS3692 DIN931 ISO4014 

Hexagon head setscrew – fully threaded BS3692 DIN933 ISO4017 

3 
 
          

Hexagon Full Nut  BS3692 DIN934 ISO4032 

         

Hexagon Lock Nut  BS3692 DIN439/936  ISO4035 

         

Hexagon Flange Nut  N/A DIN6923 ISO4161 

         

Square Weld Nut  N/A DIN928 N/A 

         

Hexagon Weld Nut  N/A DIN929 N/A 

         

Hex Socket Cap  BS4168 DIN912 ISO4762 

Hex Socket Button  BS4168 N/A ISO7380 

Hex Socket Countersunk  BS4168 DIN7991 ISO10642

Hex Socket Setscrew Plain Cup point BS EN ISO4029 DIN916 ISO4029 

Hex Socket Setscrew Flat point  BS EN ISO4026 DIN913 ISO4026 

Hex Socket Setscrew Dog point  BS EN ISO4028 DIN915 ISO4028 

Hex Socket Setscrew Cone point  BS EN ISO4027 DIN914 ISO4027 

         

Pan recess machine screw  BS4183 DIN7985 ISO7045 

Pan slotted machine screw  BS4183 DIN85 ISO1580 

Countersunk recess machine screw BS4183 DIN965 ISO7046 

Countersunk slotted machine screw BS4183 DIN963 ISO2009 

4 
 
 Cheese Slotted machine screw  BS4183 DIN84 ISO1207 

Raised Csk Recess machine screw  BS4183 DIN966 ISO7047 

Raised Csk Slotted machine screw  BS4183 DIN964 ISO2010 

         

Toothed lock washer – internal  N/A DIN6797J N/A 

Toothed lock washer – external  N/A DIN6797A N/A 

         

Square sect. single coil spring washer BS4464A DIN7980 N/A 

Rectangular sect. single coil spring washer BS4464B DIN127 N/A 

Plating and Finishes

Anti-Corrosion
Finish Color Used With Characteristics And Uses
Properties

Good-Interior Most
Black Oxide Black Decorative finish. Used on interior applica
Only metals

Black Zinc Black Excellent All metals Rich and lustrous. With or without lacque

Non-porous metallic plating. Rich appearance, good ru

Bright Silver-gray Most
Cadmium Very Good cost, good electrical conductivity. Bright silver-gray d
Dull or burnished metals
electroplated finish.

Chromium Used wherever a beautiful finish is desired. Bright bl

Bright Blue-white Excellent All metals
(Chrome) appearance. Electroplated.

A yellow, brown, green or iridescent colored catalog

Dichromate Dip Rainbow Excellent All metals process gently increases rust resistance. Add to Zi
plating.

Excellent-168 Added protection containing corrosion inhibitors. Exc

E-Coat Black All metals
Hour Salt Spray applications.

5 
 
 Green, Blue, Olive
A coloring dip which also adds rust resistance. Usuall
Iridite Drab, Red, Bronze, Excellent All metals
or Cadmium.
Black

Excellent-500 Outstanding corrosion resistant finish that provides eco

JS-500 Chrome-like luster All metals
Hour Salt Spray protection without adversely affecting dime

A hard stable, dull white or bright burnished finish. Us

Nickel Silver Very good All metals
and hardware.

Ferrous Added protection when oiled with a non-drying petrole

Parkerized Black Excellent
metals corrosion inhibitors. Good lubricity.

Dull, gray, black, or Ferrous

Phosphating Excellent A chemical process of rust-proofing ste
blue metals

Stainless For stainless steels. A nitric acid dip to remove fore

Passivating - Excellent
steels brighten finish.

Zinc A commonly used finish with good rust resistance, ap

Gray Very good All metals
Electrogalvanized cost.

DIN / ISO / EN Crossover Chart

DIN Comparable Title of
Title DIN DIN DIN Date of current
DIN EN ISO replacement Comment
Standard EN ISO standard/modified
ISO Standard standard

Prevailing
torque type
All-metal (all-metal Height of nut changed;
prevailing hexagon width across flat
980 7042 27042 7042 1998-02
torque type nuts), style 2 according to ISO 272
hexagon nuts - Property included
classes 5, 8,
10 and 12

Prevailing
All-metal torque type Height of nut changed;
prevailing all-metal width across flat
980 10513 30513 10513 1998-02
torque type hexagon nuts, according to ISO 272
hexagon nuts style 2, with included
metric fine
pitch thread -

6 
 
 DIN Comparable Title of
Title DIN DIN DIN Date of current
DIN EN ISO replacement Comment
Standard EN ISO standard/modified
ISO Standard standard

Property
classes 8, 10
and 12

Only one head

Clevis pins Clevis pins
1434 22341 2341 1992-10 dimension. Some other
with head with head
nominal lengths defined

Only one head

Clevis pins Clevis pins
1435 22341 2341 1992-10 dimension. Some other
with head with head
nominal lengths defined

Only one head

Clevis pins Clevis pins
1436 22341 2341 1992-10 dimension. Some other
with head with head
nominal lengths defined

Clevis pins Clevis pins Some other nominal

1444 22341 2341 1992-10
with head with head lengths defined

Clevis pins Clevis pins Some other nominal

1433 22340 2340 1992-10
without head without head lengths defined

Clevis pins Clevis pins

1443 22340 2340 1992-10
without head without head

Cross
recessed
Countersunk
countersunk
(flat) head Head dimensions and
(flat) head
tapping 7982 7050 7050 1990-08 countersunk angles
tapping
screws with changed
screws
cross recess
(common
head style)

Countersunk
Cross
flat head
recessed Nominal size changed;
screws
countersunk head dimension
(common
(flat) head changed; thread length
7046- head style)
screws 965 7046 7046-1 1994-10 changed; strength 8.8
1 with type H or
(Countersunk included (see Part 2);
type Z cross
heads penetration depth of
recess -
according to cross slots changed
Property class
ISO)
4.8

Cross Countersunk Nominal size changed;

966 7047 7047 7047 1994-10
recessed raised head head dimension
countersunk screws changed; thread length

7 
 
 DIN Comparable Title of
Title DIN DIN DIN Date of current
DIN EN ISO replacement Comment
Standard EN ISO standard/modified
ISO Standard standard

(oval) head (common changed; strength 8.8

screws head style) omitted; penetration
(Countersunk with type H or depth of cross slots
heads type Z cross changed
according to recess -
ISO) Product grade
A

Standard divided into

Cross Cross
five single standards
recessed recessed
(EN ISO 10666, 15480,
countersunk countersunk
15481, 15482, 15483);
head drilling 7504 15482 15482 2000-02 head drilling
thread ST 3.9 omitted;
screws with screws with
hexagon head with
tapping screw tapping screw
collar and slot (Form L)
thread thread
omitted

Standard divided into

Cross Cross five single standards
recessed pan recessed pan (EN ISO 10666, 15480,
head drilling head drilling 15481, 15482, 15483);
7504 15481 15481 2000-02
screws with screws with thread ST 3.9 omitted;
tapping screw tapping screw hexagon head with
thread thread collar and slot (Form L)
omitted

Cross Cross Marginal change of head

recessed pan recessed pan dimensions. Caution
7981 7049 7049 1990-08
head tapping head tapping with automatic feed and
screws screws connection systems

Cross Cross Standard divided into

recessed recessed five single standards
raised raised (EN ISO 10666, 15480,
countersunk countersunk 15481, 15482, 15483);
7504 15483 15483 2000-02
head drilling head drilling thread ST 3.9 omitted;
screws with screws with hexagon head with
tapping screw tapping screw collar and slot (Form L)
thread thread omitted

Standard divided into

Drilling
Drilling screws five single standards
screws with
with tapping (EN ISO 10666, 15480,
tapping screw
screw thread - 15481, 15482, 15483);
thread - 7504 10666 10666 2000-02
Mechanical thread ST 3.9 omitted;
Mechanical
and functional hexagon head with
and functional
properties collar and slot (Form L)
properties
omitted

8 
 
 DIN Comparable Title of
Title DIN DIN DIN Date of current
DIN EN ISO replacement Comment
Standard EN ISO standard/modified
ISO Standard standard

Grooved pins Grooved pins -

- Full-length Full-length Nominal lengths
parallel 1473 8740 28740 8740 1998-03 parallel redefined. Shear rate
grooved, with grooved, with increased.
chamfer chamfer

Grooved pins Grooved pins -

- Fulllength Full-length Nominal lengths
parallel 1470 8739 28739 8739 1998-03 parallel redefined. Shear rate
grooved, with grooved, with increased.
pilot pilot

Grooved pins Grooved pins - Nominal lengths

- Fulllength 1471 8744 28744 8744 1998-03 Full-length redefined. Shear rate
taper grooved taper grooved increased.

Grooved pins Grooved pins -

Nominal lengths
- Half-length Half-length
1474 8741 28741 8741 1998-03 redefined. Shear rate
reverse-taper reverse-taper
increased.
grooved grooved

Grooved pins Grooved pins - Nominal lengths

- Half-length 1472 8745 28745 8745 1998-03 Half-length redefined. Shear rate
taper grooved taper grooved increased.

Grooved pins Grooved pins -

Nominal lengths
- One-third- One-third-
1475 8742 28742 8742 1998-03 redefined. Shear rate
length centre length centre
increased.
grooved grooved

Grooved pins Grooved pins

with with
1477 8747 28747 8747 1998-03 Chamfer redefined
countersunk countersunk
head head

Grooved pins Grooved pins

with round 1476 8746 28746 8746 1998-03 with round Chamfer redefined
head head

Hexagon Bolts
without Nominal size extended;
Hexagon head
Hexagon Nut width across flats
601 4016 24016 4016 4016 2001-03 bolts - Product
- with according to DIN ISO
grade C
Hexagon Nut, 272 included
Type g

Hexagon 960 8765 28765 8765 8765 2001-03 Hexagon thin Nominal size extended;
bolts, Metric nuts width across flats

9 
 
 DIN Comparable Title of
Title DIN DIN DIN Date of current
DIN EN ISO replacement Comment
Standard EN ISO standard/modified
ISO Standard standard

fine thread, (chamfered) according to DIN ISO

Types m and with metric 272 included
mg fine pitch
thread -
Product
grades A and
B

Dimensions partially
Hexagon bolts changed; width across
Hexagon
6921 1665 8102 1998-11 with flange, flats according to ISO
flange bolts
heavy series 272; strength 12.9
omitted

Hexagon head
bolts with
shank; M 1,6 Hexagon head Nominal size extended;
to M 39 screw bolts - Product width across flats
931-1 4014 24014 4014 4014 2001-03
threads, grades A and according to DIN ISO
Product B 272 included
grades A and
B

Hexagon head Hexagon head

Nominal size extended;
screws - screws -
width across flats
Product 933 4017 24017 4017 4017 2001-03 Product
according to DIN ISO
grades A and grades A and
272 included
B B

Fine thread omitted to

be included in a
Hexagon nuts Hexagon nuts
6923 1661 4161 1998-02 separate standard
with flange with flange
later); width across flat
M10 changed

Hexagon Width across flats

Hexagon nuts
nuts; Metric according to DIN ISO
555 4034 24034 4034 4034 2001-03 - Product
Thread, Type 272 included; nominal
grade C
g diameter reduced

Nominal diameter
Hexagon
changed, height of the
nuts; Metric Hexagon nuts,
nut changed partially;
screw style 1 -
nuts with fine thread
threads; 934 4032 24032 4032 4032 2001-03 Product
specified in DIN EN ISO
Product grades A and
8673; width across flats
grades A and B
according to DIN ISO
B
272 included

10 
 
 DIN Comparable Title of
Title DIN DIN DIN Date of current
DIN EN ISO replacement Comment
Standard EN ISO standard/modified
ISO Standard standard

Nominal diameter
Hexagon Hexagon nuts, changed, height of the
nuts; Metric style 1, with nut changed partially;
screw metric fine nuts with regular type
threads; 934 8673 28673 8673 2001-03 pitch thread - screw thread specified
Product Product in DIN EN ISO 4032;
grades A and grades A and width across flats
B B according to DIN ISO
272 included

Hexagon
screws,
Thread Hexagon head Nominal size extended;
Approximately screws - width across flats
558 4018 24018 4018 4018 2001-03
to Head, Product grade according to DIN ISO
Metric C 272 included
Thread, Type
g

Hexagon Hexagon
socket socket
7991 10642 10462 2004-06
countersunk countersunk
head screws head screws

Hexagon Hexagon Nominal size range

socket head 912 4762 4762 2004-06 socket head changed; fine thread
cap screws cap screws deleted (ISO 21269)

Hexagon Hexagon
Nominal sizes M1.4,
socket set socket set
914 4027 4027 2004-05 M1.8, M14, M18 and
screws with screws with
M22 omitted
cone point cone point

Hexagon Hexagon
socket set socket set
916 4029 4029 2004-05
screws with screws with
cup point cup point

Hexagon Hexagon
Nominal sizes M1.4,
socket set socket set
915 4028 4028 2004-05 M1.8, M14, M18 and
screws with screws with
M22 omitted
dog point dog point

Hexagon Hexagon
Nominal sizes M1.4,
socket set socket set
913 4026 4026 2004-05 M1.8, M14, M18 and
screws with screws with
M22 omitted
flat point flat point

11 
 
 DIN Comparable Title of
Title DIN DIN DIN Date of current
DIN EN ISO replacement Comment
Standard EN ISO standard/modified
ISO Standard standard

Hexagon thin Correlation of

Hexagon thin
nuts dimensions with DIN
nuts with M
439-1 4036 24036 4036 4036 2001-02 (unchamfered) 439-1, except for the
1,6 to M 10
- Product width across flat of the
threads
grade B nut M10

Hexagon thin Hexagon thin

In tables 1 and 2
nuts with M nuts
abbreviations changed
1,6 to M 52 (unchamfered)
439-2 4035 24035 4035 2001-03 and some specifications
and M 8x1 to - Product
(thread dimensions)
M 52x3 grades A and
changed
threads B

Standard divided by
Hexagon thin Hexagon thin regular type screw
nuts with M nuts threads and fine
1,6 to M 52 (unchamfered) threads; width across
439-2 4035 24035 4035 4035 2001-03
and M 8x1 to - Product flats according to ISO
M 52x3 grades A and 272 changed; nominal
threads B size range changed; fine
thread see ISO 8675

Hexagon thin Standard divided by

nuts regular type screw
Hexagon thin
(unchamfered) threads and fine
nuts with M
with metric threads; width across
1,6 to M 52
439-2 8675 28675 8675 2001-03 fine pitch flats according to ISO
and M 8x1 to
thread - 272 changed; nominal
M 52x3
Product size range changed;
threads
grades A and regular type screw
B thread see ISO 4035

Standard divided into

five single standards
Hexagon Hexagon
(EN ISO 10666, 15480,
washers head washers head
15481, 15482, 15483);
drilling screws 7504 15480 15480 2000-02 drilling screws
thread ST 3,9 omitted;
with tapping with tapping
hexagon head with
screw thread screw thread
collar and slot (Form L)
omitted

High-strength High-strength
hexagon head structural
bolts with bolting
14399-
large widths 6914 7412 2006-06 assemblies for
4
across flats preloading -
for structural Part 4:
steel bolting System HV -
Hexagon bolt

12 
 
 DIN Comparable Title of
Title DIN DIN DIN Date of current
DIN EN ISO replacement Comment
Standard EN ISO standard/modified
ISO Standard standard

and nut
assemblies

High-strength
structural
High-strength
bolting
hexagon nuts
assemblies for
with large
14399- preloading -
widths across 6915 2006-06
4 Part 4:
flats for
System HV -
structural
Hexagon bolt
steel bolting
and nut
assemblies

Hexagon head
M 8x1 to M screws with
Nominal size extended;
100x4 metric fine
width across flats
hexagon head 961 8676 28676 8676 8676 2001-03 pitch thread -
according to DIN ISO
bolts with fine Product
272 included
pitch thread grades A and
B

Mushroom
head square 603 8677 1981-10
neck bolts

Parallel pins
Parallel pins of
of
unhardened Nominal length
unhardened
7 2338 22338 2338 1998-02 steel and redefined (with round
steel and
austenitic end) form A+C deleted
austenitic
stainless steel
stainless steel

Parallel pins
with internal
Parallel pins
thread, of Dimensions partially
with internal 7979 8735 28735 8735 1998-03
hardened and changed
thread
martensitic
stainless steel

Parallel pins Parallel pins

with internal with internal
thread, of thread, of Dimensions partially
7979 8733 28733 8733 1998-03
unhardened unhardened changed
and austenitic and austenitic
stainless steel stainless steel

6325 8734 28734 8734 1998-03

Parallel pins, Parallel pins of Some other nominal

13 
 
 DIN Comparable Title of
Title DIN DIN DIN Date of current
DIN EN ISO replacement Comment
Standard EN ISO standard/modified
ISO Standard standard

Hardened; hardened and lengths defined

Tolerance martensitic
Zone m6 stainless steel
(Dowel pins)

Nominal sizes changed,

Plain washers nominal size 24 size "a"
Plain washers
- Extra large redefined to the
- Extra large
series, 440 7094 7094 2000-12 maximum, square-end
series, product
product grade hole Form R omitted;
grade C
C (standard DIN 440 still
valid)

Plain washers Plain washers

for clevis for clevis pins;
1440 28738 8738 1992-10 Nominal sizes changed
pins; product product grade
grade A A

Prevailing Prevailing
torque type - torque type -
Width across flat M10
All-metal 6927 1664 7044 1998-02 All-metal
changed
hexagon nuts hexagon nuts
with flange with flange

Prevailing
torque type
Prevailing (all-metal Height of nut changed;
torque type hexagon width across flat
6925 7042 27042 7042 1998-02
all-metal nuts), style 2 according to ISO 272
hexagon nuts - Property included
classes 5, 8,
10 and 12

Prevailing
torque type
all-metal
Prevailing hexagon nuts, Height of nut changed;
torque type style 2, with width across flat
6925 10513 30513 10513 1998-02
all-metal metric fine according to ISO 272
hexagon nuts pitch thread - included
Property
classes 8, 10
and 12

Prevailing Prevailing
torque type torque type Width across flat M10
6926 1666 12125 1998-02
hexagon nuts hexagon nuts changed
with flange with flange
(with non- (with non-

14 
 
 DIN Comparable Title of
Title DIN DIN DIN Date of current
DIN EN ISO replacement Comment
Standard EN ISO standard/modified
ISO Standard standard

metallic metallic
insert), with insert), with
metric fine metric fine
pitch thread pitch thread

Prevailing
torque type
Prevailing hexagon nuts
Height of nut changed;
torque type (with non-
width across flat
hexagon nuts 982 7040 27040 7040 1998-02 metallic
according to ISO 272
with non- insert), style 1
included
metallic insert - Property
classes 5, 8
and 10

Prevailing
torque type
hexagon nuts
(with non-
Prevailing
metallic Height of nut changed;
torque type
insert), style width across flat
hexagon nuts 982 10512 30512 10512 1998-02
1, with metric according to ISO 272
with non-
fine pitch included
metallic insert
thread -
Property
classes 6, 8
and 10

Prevailing
torque type
Prevailing hexagon nuts
Height of nut changed;
torque type (with non-
width across flat
hexagon nuts 6924 7040 27040 7040 1998-02 metallic
according to ISO 272
with non- insert), style 1
included
metallic insert - Property
classes 5, 8
and 10

Prevailing
torque type
hexagon nuts
Prevailing
(with non- Height of nut changed;
torque type
metallic width across flat
hexagon nuts 6924 10512 30512 10512 1998-02
insert), style according to ISO 272
with non-
1, with metric included
metallic insert
fine pitch
thread -
Property
classes 6, 8

15 
 
 DIN Comparable Title of
Title DIN DIN DIN Date of current
DIN EN ISO replacement Comment
Standard EN ISO standard/modified
ISO Standard standard

and 10

Prevailing Prevailing
torque type torque type Height of nut changed;
hexagon thin hexagon, thin width across flat
985 10511 10511 1998-02
nuts with nuts (with according to ISO 272
non-metallic non-metallic included
insert insert)

Product grade
A washers
with a
Plain washers
hardness
- Normal Without chamfer, up to
from 300 HV, 125-2 7089 7089 2000-11
series, Product nominal diameter 64
designed for
grade A
use with
hexagon head
bolts and nuts

Product grade
A washers
with a Plain washers,
hardness chamfered -
Without chamfer, up to
from 300 HV, 125-2 7090 7090 1990-03 Normal series,
nominal diameter 64
designed for Product grade
use with A
hexagon head
bolts and nuts

Product grade
A washers
with a
Plain washers Pyramid diamond
hardness up
- Small series, hardness 140 HV
to 250 HV, 433-1 7092 7092 2000-11
Product grade cancelled; rating
designed for
A changed
use with
cheese head
screws

Product grade
A washers
with a
Plain washers
hardness up
- Normal Without chamfer, up to
to 250 HV, 125-1 7089 7089 2000-11
series, Product nominal diameter 64
designed for
grade A
use with
hexagon head
bolts and nuts

16 
 
 DIN Comparable Title of
Title DIN DIN DIN Date of current
DIN EN ISO replacement Comment
Standard EN ISO standard/modified
ISO Standard standard

Product grade
A washers
with a Plain washers,
hardness up chamfered -
Without chamfer, up to
to 250 HV, 125-1 7090 7090 1990-03 Normal series,
nominal diameter 64
designed for Product grade
use with A
hexagon head
bolts and nuts

Product grade
A washers
with a
Plain washers
hardness up
- Small series,
to 300 HV, 433-2 7092 7092 2000-11 Nominal sizes changed
Product grade
designed for
A
use with
cheese head
screws

Product grade
C washers, Plain washers
designed for - Normal
126 7091 7091 2000-11 Nominal sizes changed
use with series, Product
hexagon head grade C
bolts and nuts

Cross
Raised
recessed
countersunk
raised Head dimensions and
(oval) head;
7983 7051 7051 1990-08 countersunk countersunk angles
tapping
(oval) head changed
screws with
tapping
cross recess
screws

Pan head Nominal size changed;

Recessed screws with head dimension
raised cheese type H or type changed; thread length
7985 7045 7045 1994-10
(fillister) head Z cross recess changed; penetration
screws - product depth of cross slots
grade A changed

Modifications of
Slotted
Slotted cheese dimensions < 2,5;
cheese head
head screws - dimension of slots
screws - 84 1207 1207 1994-10
Product grade changed; partly nominal
Product grade
A lengths deleted;
A
strength 8.8 deleted

17 
 
 DIN Comparable Title of
Title DIN DIN DIN Date of current
DIN EN ISO replacement Comment
Standard EN ISO standard/modified
ISO Standard standard

Slotted Slotted
countersunk countersunk
Nominal size changed;
(flat) head flat head
head dimension
screws screws
963 2009 2009 2009 1994-10 changed; thread length
(Countersunk (common
changed; strength 8.8
heads head style) -
cancelled
according to Product grade
ISO) A

Slotted Slotted
headless headless
427 2342 2342 2004-05
screws with screws with
shank shank

Slotted pan Slotted pan Thread included;

head screws - head screws - dimensions of head and
85 1580 1580 1994-10
Product grade Product grade slot changed; strength
A A 8.8 deleted

Slotted raised
Slotted raised
countersunk
countersunk Nominal size changed;
(oval) head
head screws head dimension
screws
964 2010 2010 2010 1994-10 (common changed; thread length
(Countersunk
head style) - changed; strength 8.8
heads
Product grade cancelled
according to
A
ISO)

Slotted set Slotted set

No modifications of
screws with 553 27434 7434 1992-10 screws with
dimensions
cone point cone point

Slotted set Hexagon head

No modifications of
screws with 7976 1479 1479 1990-08 tapping
dimensions
cup point screws

Slotted set Slotted set

No modifications of
screws with 551 24766 4766 1992-10 screws with
dimensions
flat point flat point

Slotted set
No modifications of
screws with 94 1234 1234 1998-02 Split pins
dimensions
long dog point

Slotted set Slotted set

No modifications of
screws with 417 27435 7435 1992-10 screws with
dimensions
long dog point long dog point

18 
 
 DIN Comparable Title of
Title DIN DIN DIN Date of current
DIN EN ISO replacement Comment
Standard EN ISO standard/modified
ISO Standard standard

Spring-type Spring-type Range of nominal

straight pins - straight pins - diameters and lengths
7344 8748 28748 8748 8748 2007-06
Coiled, heavy Coiled, heavy extended. Shear range
duty duty changed.

Spring-type Spring-type Range of nominal

straight pins - straight pins - diameters and lengths
7343 8750 28750 8750 8750 2007-06
Coiled, Coiled, extended. Shear range
standard duty standard duty changed.

Specification "non-
Spring-type Spring-type
jamming" included;
straight pins - straight pins -
1481 8752 28752 8752 1998-03 chamfer redefined;
Slotted, Slotted, heavy
partial change of
heavy duty duty
dimensions

Specification "non-
Spring-type Spring-type
jamming" included;
straight pins, straight pins -
7346 13337 3337 2009-10 chamfer redefined;
slotted, light Slotted, light
partial change of
duty duty
dimensions

Thread rolling
screws for
ISO metric
Normative revision,
thread - Part Thread rolling
values for case-
1: Technical 7500- screws for
7085 2009-06 hardening depth and
specifications 1 ISO-metric
hole size revised, torque
for case thread
values reduced
hardened and
tempered
screws

Nominal length
Unhardened Unhardened
1 22339 2339 1992-10 redefined (with round
taper pins taper pins
end)

Unhardened Unhardened
Technical delivery
taper pins taper pins
7977 28737 8737 1992-10 conditions partially
with external with external
changed
thread thread

Unhardened Unhardened
taper pins taper pins Dimensions partially
7978 28736 8736 1992-10
with internal with internal changed
thread thread

19 
 
 DIN Comparable Title of
Title DIN DIN DIN Date of current
DIN EN ISO replacement Comment
Standard EN ISO standard/modified
ISO Standard standard

High-strength
structural
Washers for
bolting
high tensile
14399- assemblies for
bolting in 6916 7416 2006-06
6 preloading -
steel
Part 6: Plain
structures
chamfered
washers

Washers; Plain washers

outside - Large series
7093- Dimensions partially
diameter ˜ 3 9021 7093-1 2000-11 - Part 1:
1 changed
x bolt Product grade
diameter A

Washers; Plain washers

outside - Large series
7093- Dimensions partially
diameter 9021 7093-2 2000-11 - Part 2:
2 changed
approx. 3 x Product grade
bolt diameter C

HARDNESS CONVERSION TABLE

Approximate Equivalents of Rockwell B Hardness Numbers
for Soft Metals
VICKERS  BRINELL 
ROCKWELL 
DPH  BHN 

HV/10  B  E  F  G H K 15‐T 30‐T 45‐T 500kg  3000kg

254  100        83     93 82 72 201  240

248  99        81     93 82 71 195  234

243  98        79     93 81 70 189  228

238  97        78     92 81 69 184  222

20 
 
 234  97        77     92 80 69 181  218

230  96        76     92 80 68 179  214

226  96        75     92 80 68 177  210

222  95        74     92 79 67 175  208

217  95        73     92 79 67 171  205

213  94        73     91 79 66 169  203

208  93        71     91 78 66 167  200

204  92        70   100 91 78 65 163  195

200  92        69   100 91 77 64 162  193

196  91        68   100 90 77 64 160  190

192  90        66   99 90 76 63 157  185

188  89        64   98 90 76 62 154  180

184  88        63   97 90 75 61 151  176

180  87        61   97 89 75 60 148  172

176  86        59   96 89 74 59 145  169

172  85        58   95 89 74 58 142  165

168  84        56   94 88 73 57 140  162

164  83        54   93 88 72 56 137  159

160  82        53   92 88 72 55 135  156

156  81        51   91 87 71 54 133  153

152  80        49   91 87 70 53 130  150

148  79        48   90 87 70 52 128  147

144  78        46   89 86 69 51 126  144

141  77        44   88 86 68 50 124  141

21 
 
 139  76        43   87 86 68 49 122  139

137  75     100  41   86 85 67 49 120  137

135  74     99  39   85 85 66 48 118  135

132  73     99  38   85 85 66 47 116  132

130  72     98  36   84 84 65 46 114  130

127  71  100  98  35   83 84 64 45 112  127

125  70  100  97  33   82 84 64 44 110  125

123  69  99  96  31   81 83 63 43 109  123

120  68  98  96  30   80 83 62 42 107  121

118  67  98  95  28   79 83 62 41 106  119

116  66  97  95  27   78 82 61 40 104  117

115  65  96  94  25   78 82 60 39 102  116

114  64  96  94  24   77 82 60 38 101  114

113  63  95  93  22   76 81 59 37 99  112

112  62  95  92  21   75 81 58 36 98  110

111  61  94  92  19   74 81 57 35 96  108

110  60  93  91  18   73 81 57 34 95  107

108  59  93  91  16   72 80 56 32 94  106

107  58  92  90  15   71 80 55 31 92  104

106  57  91  90  13   71 80 55 30 91  102

105  56  91  89  12   70 79 54 29 90  101

104  55  90  88  10   69 79 53 28 89  99

103  54  90  88  9   68 79 53 27 87   

102  53  89  87  7   67 78 52 26 86   

22 
 
 101  52  88  87  6   66 78 51 25 85   

100  51  88  86  4   65 78 51 24 84   

100  50  87  86  3   65 77 50 23 83   

99  49  87  85      64 77 49 22 82   

98  48  86  85      63 77 49 21 81   

97  47  85  84      62 76 48 20 80   

96  46  85  83      61 76 47 19 79   

95  45  84  83      60 76 46 18 79   

95  44  84  82      59 75 46 17 78   

94  43  83  82      58 75 45 16 77   

93  42  82  81      58 75 44 15 76   

92  41  82  81      57 74 44 14 75   

91  40  81  80      56 74 43 13 74   

90  39  80  79      55 74 42 11 74   

90  38  80  79      54 73 42 10 73   

89  37  79  78      53 73 41 9 72   

88  36  79  78    100 52 73 40 8 71   

88  35  78  77    100 52 72 40 7 71   

87  34  77  77    99 51 72 39 6 70   

87  33  77  76    99 50 72 38 5 69   

86  32  76  75    99 49 71 38 4 68   

86  31  76  75    98 48 71 37 3 68   

85  30  75  74    98 47 71 36 2 67   

85  29  74  74    98 46 70 36 1 66   

23 
 
 84  28  74  73    97 45 70 35   66   

84  27  73  73    97 45 70 34   65   

83  26  73  72    97 44 69 33   65   

83  25  72  71    96 42 69 33   64   

82  24  71  71    96 42 69 32   64   

82  23  71  70    96 41 68 31   63   

81  22  70  70    95 40 68 31   63   

81  21  70  69    95 39 68 30   62   

80  20  69  69    95 38 68 29   62   

80  19  68  68    94 38 67 29   61   

79  18  68  67    94 37 67 28   61   

79  17  67  67    93 36 67 27   60   

78  16  67  66    93 35 66 26   60   

78  15  66  66    93 34 66 26   59   

77  14  65  65    92 33 66 25   59   

77  13  65  65    92 32 65 24   58   

76  12  64  64    92 32 65 24   58   

76  11  64  64    91 31 65 23   57   

75  10  63  63    91 30 64 22   57   

75  9  62  62    91 29 64 22   56   

74  8  62  62    90 28 64 21   56   

74  7  61  61    90 27 63 20   56   

73  6  61  61    90 26 63 20   55   

24 
 
 73  5  60  60    89 26 63 19   55   

72  4  59  60    89 25 62 18   55   

72  3  59  59    88 24 62 17   54   

71  2  58  58    88 23 62 17   54   

71  1  58  58    88 22 61 16   53   

70  0  57  57    87 21 61 15   53   

HV/10  B  E  F  G H  K  15‐T 30‐T 45‐  500kg  3000kg 

VICKERS  BRINELL 
ROCKWELL 
DPH  BHN 

Chemical Resistance Table For Screws in A2

and A4
Classification of corrosion resistance:

 0 = resistant (but see L)

 1 = slight attack, usable in certain areas
 2 = hardly any resistance at all, practically unusable
 3 = no resistance
 L = danger of pitting even in resistant class

Material
Corrosive Agent Concentration Temp °C
A2 A4

25 
 
 Effluent water (with traces of sulphuric acid) - up to 40° 0 0

Acetone
all concentrations 20° 0 0
CH3COCH3

Acetyl chloride
- boiling 1 0
Ch3CoCl

Aluminium
molten 750° 3 3
Al

Aluminium Chloride L
5% 50° 2 1
Al Cl3,6H2O

10% 20° 0 0
Formic Acid
15% 20° 0 0
H•COOH
100% 20° 0 0

Ammonia
- - 0 0
NH3

10% boiling 0 0
25% boiling 1 1
Ammonium chloride (sal ammoniac) L
50% boiling 2 1
NH4OH
cold and hot 20° 0 0
saturated boiling 2 1

Ammonium hydroxide 20°

all 0 0
NH4OH boiling

Ammonium perchlorate L 20° 0 0

10%
NH4CIO4 boiling 0 0

Aniline
20° 0 0
C6H7NH2

Malic acid
up to 50% 20° 0 0
(COOH)2CH2CH OH

Cider - 20° 0 0

Ethyl alcohol (ethanol)

all concentrations 20° 0 0
C2H5OH

Ethyl ether
- boiling 0 0
(C2H5)2•O

Atmosphere - - 0 0

Petrol all concentrations 20° 0 0

26 
 
 Benzoic acid
all concentrations 20° 0 0
C6H5CO O OH

Beer - 20° 0 0

Blood - - 0 0

Spirits - 20° 0 0

20° 3 3
Bromine Br L -
boiling 3 3

Buttermilk - 20° 0 0

Butyric acid
100% 20° 0 0
C3H7COOh

Chlorine Cl
20° 0 0
Gas
in dry state -
20° 3 3
Gas
in moist state L -
100° 3 3

Chloride of lime L dry 20° 0 0

Ca (IO)2, CaO, 2 H2O moist 20° 1 1
Bleaching solution 2.5g Cl/l 20° 1 0

Chloroform
water free 20° 0 0
CH CL3

Chlorine water L
- 20° 1 1
=cold water saturated with water

- 20° 1 1
Hydrogen chloride gas L - 50° 1 1
HCI - 100° 2 1
- 400° 3 3

Chromic oxide 10% pure 20° 0 0

CrO3 50% pure 20° 1 1

Ferrogallic ink L - 20° 0 0

Iron phosphate solution, bonder process - 98° 0 0

Mineral oil - 20° 0 0

Vinegar = spirit vinegar - 20° 0 0

Acetic acid 10% 20° 0 0

27 
 
 CH3COOH 50% 20° 0 0

20° 0 0
Glacial acetic acide boiling 100%
boiling 1 1

20° 0 0
Acetic acid + hydrogen peroxide
10 u. 50% 50° 0 0
CH3COOH + H2O2
90° 0 0

20° 0
- 0
Dyer's bath alkaline or neutral organically acid slightly sulphuric acid or boiling 0
0
organically acid + sulphuric acid boiling 0
- 0
(H2SO4 below 1%)
20° 0
- 0
boiling 1
Oleic acid
30 bar technical 150° 0 0
C17H33COOH

Oleic acid + traces

- hot 2 1
H2SO4

Meat - - 0 0

Hydrofluoric acid = hydrogen fluoride

40% 20° 3 3
H2 F2

Fruit juices and fruit acids - 20° 0 0

Vegetables - boiling 0 0

Tannic acid = tannin 5% 20° 0 0

Glycerin 20° 0 0
conc.
C3 H5 (OH)3 boiling 0 0

Pit water acid 20° 0 0

Urine L - 20° 0 0

dry 20° 0 0
Iodine I L
moist 20° 1 0

20° 0 0
Coffee -
boiling 0 0

Potassium aluminium sulphate = alum

10% 20° 0 0
KAL(SO4)2, 12H2O)

Potassium chloride L hot 20° 0 0

K Cl saturated boiling 0 0

28 
 
 Potassium ferricyanide = red prussiate of potash
- 0 0 0
K3(Fe[CN]6)

Potassium ferrocyanide = yellow prussiate or potash 20° 0 0

-
K4[Fe(CN)6], 3 H2O) boiling 0 0

Potassium hydroxide = caustic potash solution 20% 20° 0 0

Caustic potash
50% 20° 0 0
KOH

Potassium permanganate 20° 0 0

all concentrations
K Mn O4 boiling 0 0

Calcium chloride L
cold saturated 20° 0 0
CaCL2, 6H2O

Calcium hydroxide
- 20° 0 0
Ca(OH)2 = milk of lime

Cheese - 20% 0 0

dry hot 0 0
Carbon dioxide = carbonic acid CO2
moist hot 0 0

Carbon tetrachloride C CL4 water free 20° 0 0

Aqua regia L
- 20° 3 3
H CL + HNO3

Cupric sulphate 20° 0 0

CuSO4, 5H20 boiling 0 0
all concs.
= copper vitriol 20° 0 0
+3% H2SO4 boiling 0 0

Glue (including acid) - boiling 0 0

Linseed oil 20° 0 0

-
+3% H2SO4 200° 0 0

Magnesium sulphate
MgSO4, 7H2O concentrated 20° 0 0
= Epsom salts

Methyl alcohol
all concentrations 20° 0 0
CH3OH

fresh up to 70° c 0 0
Milk
sour up to 70° C 0 0

Lactic acid 1.5% 20° 0 0

29 
 
 CH3 CHOH COOH 80% 20° 0 0

50% H2SO4 +50%

HNO3
50 ° 0 0
75% H2SO4
+25% HNO3
50 ° 1 0
Mixed acids
(nitrating acids) 20% H2SO4
50 ° 0 0
+15% HNO3

50° 0 0
70% H2SO4 + 10%
HNO3
50 ° 0 0
30% H2SO4
+5% HNO3
Monochloracetic acid L
50% 20° 1 1
CH2 Cl COO H

cold 20° 0 0
Sodium
saturated
chloride L
hot 100° 1 0
NaCl = cooking salt
saturated 100° 1 1

Sodium chloride L
Na Cl O2 5% 20° 2 2
Sodium hydroxide boiling 3 2
=caustic soda solution 25% 20° 0 0
=caustic soda
NaOH 50% boiling 2 2

Sodium hypochlorite L
20° 1 1
NaClO 5%
=bleaching solution
boiling 1 1

Sodium carbonate 10%

boiling 0 0
Na2 CO3, 10 H2O cold saturated

Sodium sulphate
cold saturated 20° 0 0
Na2 SO4, 10 H2O

Novacaine - 20° 0 0

Fruit pulp containing SO2 - - 0 0

Oil (lubricating oil) - 20° 0 0

Oil (vegetable) - 20° 0 0

P3 washing agent - 95° 0 0

30 
 
 20° and
Persil - 0 0
boiling

Petroleum - 20° 0 0

1% 20 ° 0 0
Phosphoric acid
10% 20 ° 0 0
H3PO4
45% 20 ° 0 0
chemically pure
60% 20 ° 0 0

Photographic developer (Agfa-glyzin developer) - 20 ° 0 0

Photographic fixing bath L - 20 ° 0 0

Pickling brine L - 20 ° 0 0

7% 20 ° 0 0
10% 20 ° 0 0
Nitric acid
25% 20 ° 0 0
HNO3
37% 20 ° 0 0
50% 20 ° 0 0

Hydrochloric acid L 20 ° 1 1
0.5%
HCl boiling 3 3

Sauerkraut brine L - - 2 1

Lard - 20 ° 0 0

Soft Soap - 20 ° 0 0

Sulphur, dry fused 130° 0 0

Carbon disulphide
- 20° 0 0
C S2

Sulphuric acid 1% 20° 1 0

H2SO4 boiling 1 1
2.5% 20° 1 0
boiling 2 2
5% 20° 1 0
boiling 3 2
7.5% 20 ° 1 0
boiling 2 2
10% 20 ° 2 1
20% 20 ° 1 1
80% 20 ° 1 1
70° 3 2
98% 20° 0 0
fuming =concentrated 70° 2 2
(11% free SO3) -
fuming 20° 0 0

31 
 
 (60% free SO3) - 100° 1 0
20° 0 0
80° 0 0

Hydrogen sulphide dry

<4 20° 0 0
H2S

saturated 20° 0 0
Sulphurous acid 4 bar 135° 1 0
H2 S O2 5-8 bar 160° 2 1
10-20 bar 180-200° 2 1

Schweinfurt green
3 Cu (As O2)3, - 20° 0 0
Cu (CH3 COO)2

Sea Water L - 20° 0 0

Soap - 20° 0 0

Mustard L - 20° 0 0

up to 10%
Spinning bath 70° 2 1
H2SO4

Tar (pure) - 20° and hot 0 0

Turpentine - 20° and hot 0 0

Vaseline - 20° and hot 0 0

Water
Tap water 20° 0 0
-
Pit water 20° 0 0
= acidic water

- 400° 0 0
Water vapour
Water vapour with SO2 - - 1 0
Water vapour with CO2
- - 0 0

Wine 0 0
- 20° and hot
(white and red) 0 0

Tartaric acid 10% 20° 0 0

COOH (CHOH)2 COOH 50% 20° 0 0

- 20° 0 0
Lemon juice
1% 20° 0 0
Citric acid
10% 20° 0 0
HO C(CH2 COOH)2,
25% 20° 0 0

32 
 
 COOH, H2) 50% 20° 0 0

20° 0 0
Sugar solution -
boiling 0 0

33