SIGMA

MRL E1000

www.sigmaelevator.com
Lifting up Trust

Our dedication and passion to reach customer satisfaction always have been
a driving force of our creative and innovative ideas.

As your elevator partner, upgrading our ideas in providing comfortable

elevators to our customers, at the same time, devoting ourselves in
protecting environment are our ultimate goal.

SIGMA MRL E1000 focuses on customers’ comfort through improving its

environmental performances.
High Performance
Highly efficient external gearless traction machine with
permanent magnet synchronous motor

Precise Control
modular structure with real-time control, accurate provision
and fast information transfer

Stabilized Door System

Combination of VVVF door control and PM door leading to
higher accuracy with minimal noise

Reliable Riding Protection

94 beams of net-crossing light with densely weaved
protection plane

Duty Load (kg) 250, 320, 450 550, 630, 800, 1000
Rated Speed (m/s) 0.63/1.0 1.0/1.5/1.75
Max. Rise (m) 30 90
Max. Group Control 4
Machine Type PM Gearless
Drive VVVF

SIGMA MRL E1000

In our modern world, people look for compact, practical but
stylish objects. It is no exception for elevators too. In modern
contemporary building, machine rooms for each elevator are
becoming increasingly cumbersome.
Construction requirements change and progress and we,
SIGMA, keep our steps together with these changes by
continuously improving our technologies and expose
ourselves to new innovative challenges. SIGMA MRL E1000
is designed to supply compact and efficient system by
employing machine that can be mounted within the hoistway,
eliminating the need for a bulky machine room on the roof.
 SIGMA MRL E1000 is designed to
support overall operation efficiently,
taking full account of the different
needs of the production, installation
and maintenance which lead to
handsome cost saving

SIGMA MRL E1000 is designed

to optimize the layout of hoistway
to maximize space utilization of
SIGMA MRL E1000 is equipped the hoistway thus providing more
with highly efficient PMSM Cost space for rental
gearless machine. Compared Saving
with traditional driving system,
it can save up to 40% of
energy consumption

Energy SIGMA Space

Saving MRL E1000 Saving

Time
Saving

With sophisticated pre-engineered

products accompanied by standard
processing, SIGMA MRL E1000 can
save construction time which will
bring a huge benefit to our customers

SIGMA MRL E1000 focuses on

customers’ comfort through
improving its envronmental
performance.
Aesthetics

■ Ceiling ■ COP ■ Indicator

C-ES1

VIL-EM1C

C-EL1

CBM-EM1C
C-EL2

■ Hairline ■ Handrail

HR-04

HR-02

■ Color

P-001 P-002 P-003 P-004 P-005 P-006 P-007 P-010

Pearl Shallow red light grey emerald light green grey light blue blue
 Layout
0WFSIFBE
,

0WFSIFBE
,

$)
$)

■ OH & Pit Dimension

Capacity Speed Entrance Height Overhead Pit
Type of Buffer
(kg) (m/s) (mm) (mm) (mm)

250~450 0.63~1.0 3800 1250 Poly-Urethane Buffer

1.0 3800 1350 Poly-Urethane Buffer
2100
550~1000 1.5 3950 1500 Oil Buffer
1.75 4000 1500 Oil Buffer
3JTF
3

3JTF
3

■ Car and Hoistway Dimension

Speed Load Opening OP Car size (mm) Hoistway Size (mm)
Persons
(m/s) (kg) Type (mm) CW CD HW HD
6 450 700 1000 1100 1650 1400
7 550 1100 1300 1900 1700
8 630 CO 800 1100 1400 1900* 1800
10 800 1400 1350 2150 1750
0.63
13 1000 900 1600 1400 2350 1800
1.0 3 250 700 800 900 1450 1300

1.5 4 320 700 900 1000 1550 1350

1JU
4

6 450 1000 1100 1650 1450

1JU
4

1.75 800
7 550 2S 1100 1300 1850 1750
8 630 1100 1400 1850 1850
10 800 900 1200 1500 1950 1950
13 1000 1100 2100 1850 2550

* In case HW is 1800mm, please contact SIGMA

Technical Features
●standard ○option

Features Function Introduction

Full Collective All registered car & hall calls will be answered in the sequence by which the elevator cars approach landings. The travel
●
Operation direction of car will be determined by the first registered car or hall call.

Inspection operation switches, inspection buttons & emergency stop device are provided at car top. When inspection mode
Top of Car Inspection ●
starts, only inspection operation is allowed.
Emergency Car Light When the normal lighting power fails, the emergency lighting operates. ●
Separate Car and Hall
The time of door retaining open for answering hall call and car call can be adjusted separately. ●
Call Door Times

When a car is loaded to a preset percentage of its rated load, it is considered as “full”, the car will bypass further hall calls.
Load Non Stop ●
The hall calls will be registered and will be answered on next trip (single) or by another car (group).

When elevator stays at independent service, which has been designed to meet special needs of customers, it will no longer
Independent Service ●
answer calls from out of hoistway but only operate, close & open door under manual control.
When the car is overloaded, the alarm light and buzzer operate. When overloading is indicated, car door will not close and
Overload Warning ●
elevator will not operate.
Trip Counter A counter is arranged in elevator control cabinet to count times of elevator operation for the convenience of maintenance. ●
Alarm Bell For passengers to press alarming button in emergency cases to inform outside in time. ●
Light Curtain Light curtain is provided as door closing safety device. ●

Intercom Intercom between surveillance room and machine room and car (including car top/pit) is offered, effective at power failure. ●

Emergency Firemen When fireman switch is on, the system will cancel all calls, drive elevators to fire-fighting floor directly, opens door to release
●
Operation passengers and stop operation.

Emergency Rescue in
When elevator encounters problem, the emergency rescue in controller is operated to rescue the passengers. ●
Controller

Each elevator will have a key switch 'PKS' at a designated landing (e.g., at the lobby). With this feature, a particular car may
Parking Operation ○
be commanded by its key switch to the designated landing.

Attendant Service The Attendant Operation feature allows semi-automatic operation with manual control. ○

Stopping errors shall be corrected by relevelling. The size of a possible stopping error depends on the type of drive and the
Relevelling Operation ○
accuracy of the position sensors.

Fan Automatic and A manual switch for light power is provided on car operation panel. The fan is controlled by software according to running
○
Light Manual Switch status of the elevator.

A chime installed on car top will ring when the car approaches landing to remind passengers that they have arrived at the
Chime in Car ○
destination floor.

CCTV Cable CCTV cable from car to machine room is offered. ○

When the car arrives at floor or ready to move, the system will announce about the floor number and running direction by
Voice Synthesizer ○
artificial voice.

If there is only one passenger in the car and an excessive number of car calls is registered, such nuisance is detected and all
Anti-Nuisance ○
car calls will be canceled, requiring registration of a proper number of calls.
Fire Alarm Home
When fire alarm system in a building is activated, the car will return to appointed floor immediately and send such signal to passengers. ○
Landing
Card Reader Passengers with IC card will be permitted to reach appointed floor. ○

By using a contact the elevator signal such as floor, up-down, fault, over-load, fire alarm etc. will be sent to costumed
BA Interface ○
Building Automation room.

Elevator Supervisory Monitor panel will be provided, and the elevator operation situation (running, overload, door opening, fire alarm, fault) will be
○
Panel monitored.
Elevator Monitor
To monitor the elevator operation, including floor, running direction, door opening. overload, fire alarm, fault by PC system. ○
System With PC
Automatic Emergency When the power fails suddenly, if the elevator has not arrived at the appointed floor, the ARED device will activate the car to
○
Rescue Device reach nearest floor and open the door; if the car has already arrived at the floor, the door will open by ARED.
 Please visit our website www.sigmaelevator.com

SIGMA constantly endeavors to improve the products therefore the information provided in
this catalog is subject to change without prior notice
2012.04 Printed in Korea / Revision No.0