RHEEM DOMESTIC

HOT WATER

Australia’s favourite name

in hot water
JANUARY 2019

COMES ON STEADY, HOT AND STRONG INSTALL A

 CONTENTS

Rheem Electric Storage Hot Water .........................4

Rheem Gas Storage Hot Water ..............................6
Rheem Continuous Flow Gas Hot Water ................8
Rheem Solar Hot Water .......................................10
Rheem Heat Pump Hot Water .............................12
Product Data.......................................................14

Rheem Australia Pty Ltd

Head Office National Sales Phone: 132 552
1 Alan Street National Service Phone: 131 031
Rydalmere NSW 2116
Australia
www.rheem.com.au

Postal ® Registered Trademark of Rheem Australia Pty Ltd

PO Box 7508 TM Trademark of Rheem Australia Pty Ltd
Silverwater NSW 2128
Australia ABN 21 098 823 511

2 COMES ON STEADY, HOT AND STRONG

RHEEM IS AUSTRALIA’S FAVOURITE NAME IN
HOT WATER AND THE NAME AUSTRALIANS HAVE
TRUSTED FOR GENERATIONS

YOU’LL BE RIGHT WITH RHEEM

No.1 with Australian families. Rheem is Australia’s favourite
hot water system… and it’s been that way since 1939, when
Rheem started making water heaters in Australia. Generations
of Australian families have relied on Rheem for water that
comes on steady, hot and strong!

RHEEM IS EVERYWHERE
There is an unequalled network of experienced Rheem service
agents across the country. No matter where you are in Australia
there is expert advice available to ensure that you get the
Rheem solution that is right for you. CHOOSING THE RIGHT CAPACITY RHEEM
FOR YOUR HOME
Many households change over time, so it’s important to choose
WE HAVE THE RIGHT RHEEM FOR YOU the right capacity to meet your needs both now and as your
Rheem has the most extensive range of hot water systems family grows.
available in Australia. Solar, gas or electric storage. Continuous
flow or heat pump. Energy efficient and stainless steel options. Factors to consider in determining your hot water needs:
Rheem has a range of capacities to suit your requirements and • Number of bathrooms or people using hot water
your budget. at the same time.

• Adults and children in the home (teenagers will use more hot
water than young children).

Solar, gas or electric. • Dishwashers or washing machines connected to hot water

outlets, that may use hot water at the same time.
Continuous flow, heat pump
• Will a large bathtub or spa-bath be used regularly?
or storage. Rheem has a range
• Space available to install a water heater
of hot water solutions for
• Available energy supplies - gas or electricity
every situation. Your hot water system needs will be influenced by the water
conditions, climate and water pressure in your region, as well
as the available energy supply (gas or electricity) and space
available at your home.

INSTALL A 3
 RHEEM ELECTRIC STORAGE
HOT WATER

MAINS PRESSURE HOT WATER

Rheem electric storage water heaters store hot water in the tank OFF-PEAK OR CONTINUOUS ELECTRICITY?
ready for immediate use. These products rely on an electric
element(s), which is controlled by a thermostat, to heat water. OFF-PEAK tariffs offer lower cost electricity that is only available
during specific times, typically during the night or outside peak
Larger model Rheem electric water heaters are ideal for use usage periods. These tariffs are normally reserved for larger
with low cost off-peak electricity, and are available in a range of water heater models that provide enough stored hot water for
capacities to suit most needs. daily use. Generally, two types of off peak tariffs are available.
– 8 Hour night rate – 250L - 400L (lowest rate available) and
The mains pressure advantage ensures full pressure to
multiple outlets all at the same time. – 16 hour ‘extended’ rate – 160L - 400L

‘TIME OF USE’ (TOU) tariffs provide power to the water heater

24 hours per day, but different rates apply at different times of
Electric storage systems are day i.e. rates are higher for using electricity during peak hours,
and less for electricity used during the ‘Shoulder period’ and
a relatively inexpensive overnight. Water heaters connected to TOU tariff should use a
timer ensuring operation during the lowest cost heating periods.
and reliable solution to
CONTINUOUS tariff electricity makes power available to heat the
your hot water needs. water 24 hours per day. A smaller tank can often be used on this
tariff but the running costs will be higher. The price is typically a
flat rate.

Compare various water heater running costs online at

WHY RHEEM ELECTRIC STORAGE? www.rheem.com.au/RunningCostCalculator or speak to your
energy retailer for tariff details.
Designed for Australia’s tough conditions using over 80 years of
experience manufacturing in Australia.

Includes models suitable for connection to economical ‘off Model (Litres) PPH* - Continuous/
peak’, ‘time or use’ or continuous electricity tariffs. PPH* - Off peak tariff
Single Element Time of use tariff ***
25 - -
Sizes to suit every family and hot water requirement from 25L
50 - 1
to 400L.
80 - 1-2
Mains Pressure water delivery for steady, hot and strong hot 125 - 2-3
water. 160 - 2-4
250 1-3 3-5
Indoor or outdoor use (excludes plug-in models).
315 2-4 4-6

Full technical support and spare parts available through 400 4-6 5-9

Rheem’s National Service Network. Model (Litres) PPH* - Continuous/

PPH* - Off peak tariff
Twin Element Time of use tariff ***
7 or 12 year cylinder warranty models available.1,2,3 160 1-3 2-4
250 2-3 3-5
All Rheem electric water heaters are made in a wholly owned 315 3-4 4-6
and operated Rheem facility.
400 4-7 5-9
* People per household
*** PPH supplied under ‘Time of use’ tariff conditions is equivalent to continuous
tariff, provided the power supply is unrestricted.

4 COMES ON STEADY, HOT AND STRONG

 7 or 12
ELECTRIC
1-9
PEOPLE
18L-
400L
DELIVERY
YEAR
CYLINDER
WARRANTY1,2,3

RHEEM STELLAR® ELECTRIC STAINLESS NEW RHEEM 491/492 SERIES

• Available in 50L - 315L models • Available in 80L - 400L models
4
• Up to 24% better than MEPS reducing • Easy retrofit - identical footprint & plumbing
energy use, saving you money connections to previous series models
• Stainless steel cylinder & fittings • Dual handed fittings
5
• Up to 42% lighter for easier handling • Suit lower cost tariffs
and installation
• Exclusive Rheem Ultranamel®, more durable
• No anode - saves on maintenance costs than the domestic grade Class X enamels.
• Mains pressure • Thicker anode (27mm)
Model Number:
4A1 Series • Manufactured in Australia • Twin element models available
Model Number:
491 Series
3
• 12 year cylinder warranty • Manufactured in Australia
• 12 year cylinder warranty2

RHEEM 191/192 SERIES† RHEEMPLUS® ELECTRIC

• Available in 25L & 50L • 50ºC pre-tempered model
• Dual handed fittings • Adjustable valve to deliver 50ºC at the tap.
• Front oriented fittings for easier access • Available in 125L, 160L, 250L & 315L
• 25L & 50L models ideal for small spaces. capacities

• 7 year cylinder warranty1 • Complies with the tempering requirement of

Model Number: AS/NZS 3500.4
191 Series
• Left hand connection
• Manufactured in Australia
Model Number: • 12 year cylinder warranty2
421 Series

RHEEM COMPACT 25L & 47L

• Most compact available in the 25L and
over-40L capacity ranges
• Just 390mm high (25L) & 670mm high (47L)
• Smallest diameter on the market
– 385mm (25L) & 400mm (47L)
Model Numbers:
• 47L hot water delivery** (191045 model)
111025/191045
• Dual handed (47L only) – easier to install
• Recessed plug fittings
• 7 year cylinder warranty1

** Rated hot water delivery 40L in accordance with

AS/NZS 4692.1. Actual delivery 47L when
tested to AS/NZS 4692.1.

INSTALL A 5
 RHEEM GAS STORAGE
HOT WATER

MAINS PRESSURE HOT WATER

WHEN YOU NEED IT
Mains pressure gas storage water heaters deliver hot water FACTORS TO CONSIDER
instantly, as they keep a generous quantity stored hot and
ready for your use. As they are at mains pressure, you can Purchase, Installation and Running costs:
be sure of a strong flow of hot water, and the ability to service • Gas Storage systems are a relatively inexpensive solution to
multiple showers or hot water needs at once. A choice of 4 your hot water needs. There is a Rheem model to suit just
and 5 Star models, in a range of capacities means there is a about every budget. If replacing an existing gas unit, there
model for every budget and family. And should you ever run is probably a Rheem model which can simply be installed in
short, Rheem’s high recovery models will have you back in the same space.
hot water fast.
• Higher efficiency Gas Storage water heaters cost less to run.
As a guide, every extra energy-rating star represents approx
7% less gas usage, which means savings in energy bills.

WHY RHEEM GAS STORAGE? Capacity

5 star energy rating models save you money. • Gas Storage water heaters are rated by their storage capacity
and also their “recovery rate”. This is the quantity that can
Designed for Australia’s tough conditions, using over 80 years
be fully reheated in one hour; the higher this rate the faster
of experience in Australia.
you can be back in hot water.
10 year cylinder warranty on all models.8, 9

Capacities to suit most family sizes and hot water

requirement, starting from 90 Litres.
RHEEM STELLAR® 850330 850360
Fast hot water recovery of up to 200 Litres per hour available.6
Number of People
High recovery Rheem Stellar models for high-demand
Moderate Climate 2-5 3-6
installations.
Cool Climate 2-4 3-5
Mains pressure water delivery for steady, hot and strong
RHEEM 5 STAR 850265 & 854265 850295 & 854295
hot water.
Number of People
Indoor models also available.
Moderate Climate 2-4 3-5
The ability to service multiple uses at once without losing Cool Climate 2-3 3-4
hot water pressure.
RHEEM 4 STAR 347090 347135 347170
Full technical support through Rheem’s National Service Number of People
Network.
Moderate Climate 1-3 2-4 3-5
Some models available in natural gas or propane. Cool Climate 1-2 2-3 3-4

RHEEM INDOOR 800135 800170

Number of People
Moderate Climate 2-4 3-5
Cool Climate 2-3 3-4

6 COMES ON STEADY, HOT AND STRONG

 190-360L 10 YEAR
GAS
2-6
PEOPLE
FIRST
HOUR
CAPACITY
CYLINDER
WARRANTY8,9

RHEEM STELLAR® RHEEM 5 STAR

• 5 Star energy efficiency • 5 Star energy efficiency
6
• High recovery 200L/hour of hot water • Mains pressure to multiple taps
• Mains pressure to many taps at once • Strong recovery
6
• 330L or 360L first hour capacity of hot water • 275L or 305L first hour capacity of hot water6
• Modern design to complement any home • Manufactured in Australia
• Manufactured in Australia • 10 year cylinder warranty8
9
• 10 year cylinder warranty
RHEEMPLUS®
• 50ºC temperature limited models
• No tempering valve required10
• Adjustable to deliver 50°C at the first outlet
Model Number: Model Number: (complying with AS 3498)
850 Series 850/854 Series

RHEEM 4 STAR RHEEM INDOOR

• 90L, 135L and 170L capacities • 135L and 170L capacities
• 4 Star energy efficiency • Mains pressure
• Mains pressure • Manufactured in Australia
• Hi-temp thermostat, so you need less • 10 year cylinder warranty8
hot water††
• Manufactured in Australia
• 10 year cylinder warranty8

††
Based on the most common temperature 43°C shower
through a 9 litre/minute showerhead mixing with cold water
at 10°C Rheem 4 star 347 Series with thermostat set at
73°C delivers 15-20% more continual shower time than the
Rheem 3 Star 311 Series with thermostat set at 65°C. Model Number:
Model Number: 800 Series
347 Series

INSTALL A 7
 RHEEM CONTINUOUS FLOW GAS
HOT WATER

CONTINUOUS HOT WATER

WHEN YOU NEED IT
Continuous Flow gas water heaters deliver hot water that will CHOOSING THE RIGHT CAPACITY
never run out because they heat water when you need it, for RHEEM FOR YOUR HOME
as long as you need it. Continuous Flow water heaters work
Your Rheem will be serving you for many years so it's important
differently from storage water heaters, only heating on demand
to choose the right capacity to meet your needs both now and
rather than heating and storing water until needed. Mounted to
as your family grows.
the wall and taking up less space, they are ideal for a compact
home site or apartment.
Factors to consider in determining your hot water needs:
• Number of bathrooms or people using hot water at once.
6 Star energy efficient Rheem
• Adults and children in the home (teenagers will use more hot
Continuous Flow for hot water water than young children).

that never runs out. • Dishwashers or washing machines connected, that use hot
water at the same time.

• Will a large bathtub or spa-tub be filled using hot water?

• Your needs may also depend on the climate and water

pressure. The following guide can assist you in selecting the
right Rheem Continuous Flow model for your home.

Model Rheem 12 Rheem 16 Rheem 20 Rheem 26 Rheem 27

Hot Water Flow Rate

12L/Min 16L/Min 20L/Min 26L/Min 27L/Min
(at 25oC Temp Rise)12

No. of Bathrooms
1 1.5 2 2.5 3
Moderate Climate

No. of Bathrooms
1 1 1.5 2 2.5
Cool Climate

DESIGNED TO DISAPPEAR
Your Rheem Continuous Flow water heater can be neatly
hidden away to save even more space.
Pipe covers in matching colour will conceal pipework.
Recess boxes will set your Rheem into the wall.

8 COMES ON STEADY, HOT AND STRONG

 GAS
1-6
PEOPLE
12L-54L
/MIN
CAPACITY
10 YEAR
HEAT EXCHANGER
WARRANTY14

WHY RHEEM CONTINUOUS FLOW? WITH RHEEM YOU’RE IN CONTROL

Sizes to suit every home, apartment or family – 12L, 16L, 20L, Rheem delivers added safety by putting you in control of the
26L and 27L/minute capacities.12 hot water in your home.

6 Star energy rating to save money and the environment. NEW Rheem EZiSET ® app
Set your ideal bath temperature and water level with your
Designed for Australia’s tough conditions, combining Smartphone. Optional Rheem EziSET available – 052310.
international expertise with over 75 years of experience
in Australia. Uses the security and superior signal strength of your home
WiFi and powerline network.
10 year heat exchanger warranty.14

Flamesafe® overheat protection, which automatically shuts

down your heater should it overheat.

Rheem EZ LINK® delivers up to 54L/minute by linking 2 Rheem

units to act as one, thereby doubling capacity.12

Rheem Q Factor™ for rapid hot water every time, without the
fluctuation when multiple taps demand hot water, which can
occur with some Continuous Flow units.

Family safety with electronic control for accurate and reliable

water temperature, reducing the risk of scalding.

Electronic Remote Temperature Controllers for accurate setting

of the ideal and safest temperature.

Solar ready Rheem 70ºC capable models are compatible with

solar systems without the need for special fittings.15

Factory pre-set 50ºC models available, requiring no tempering

valve.13

Full technical support through Rheem’s National Service Model Number:

876T26
Network.

Compact size for flexibility in design to suit every installation.

Available to suit either Natural Gas or Propane. Rheem Standard and Deluxe Electronic Temperature Controllers
are optional on all models, allowing you to choose the exact
Internal 27L model available, with matched flue system. temperature you need and to guard against scalding. Rheem
Bathroom Controllers can be set up to 50ºC. Deluxe Controllers
also offer a “bath fill” mode, to turn off the water flow once the
bath is filled.

INSTALL A 9
 RHEEM SOLAR
HOT WATER

SOLAR THAT SAVES

WHY RHEEM SOLAR HOW SOLAR WORKS

Energy efficient – can save up to 65% of water heating Solar water heaters work by absorbing energy from the sun’s
energy consumption.16 rays in the roof mounted solar collectors and transferring this to
heat water stored in the tank. Ground mounted direct systems
Reduces carbon emissions – solar systems can save from
rely on a circulator to push the water through the system,
1.7 to 2.6 tonnes of greenhouse gas emissions every year.19
whereas roof mounted systems rely on a natural ‘thermosiphon’
Minimise reliance on fossil fuels and protect yourself against effect. Water passes through the solar collector where it is
energy costs – take advantage of Australia’s abundant supply of heated, then moves out of the collector and into the tank. The
sunlight, and reduce your reliance on expensive, non-renewable tank gradually gets hotter until the water reaches its maximum
gas and electricity.20 stored temperature. Indirect systems use a special heating fluid,
rather than water to absorb heat from the collectors. The heat is
Complete range – the Rheem solar range includes both split,
transferred to the water in the tank via a heat exchanger.
ground mounted systems and complete roof mounted models in
a variety of capacities from 160 – 410 litres.
3. As the water rises
All weather protection – Rheem Premier® Loline series feature 4. Heated water it heats up.
unique, drain-back heat exchange technology, that prevents exits the
collector
the solar system from freezing, or overheating during weather here. 2. Water enters the
extremes.
collector here.

Booster options – Rheem solar systems are available with

electric or gas boosting, providing hot water during cloudy or
rainy weather.

Eligible for financial benefits – A STCs financial benefit is

available for installing solar water heating.21

Visit www.rheem.com.au/rebates to find out how many STCs

apply to Rheem solar water heaters by zone and to download
the Rheem STC Assignment form.

5. Heated water
enters the tank

1. Water is circulated
up to the solar
collector.

10 COMES ON STEADY, HOT AND STRONG

 SOLAR
1 - 7 180-410L
PEOPLE CAPACITY
5&7 YEAR
CYLINDER
WARRANTY17,18

GROUND MOUNTED SYSTEMS ROOF MOUNTED SYSTEMS

PREMIER LOLINE (Electric boosted) PREMIER HILINE
• Indirect design with complete frost • Features an indirect heat exchange
protection - ideal for even the coldest design, providing reliable operation
of climates. in any climate.
• Features drain-back heat exchange • Lightweight and durable stainless
technology, to maximise solar gain steel tank cylinder (52H Series).
and protect against weather extremes
Model Number: • Space saving roof mounted
591270/2SP • Electric boost Model Number: installation.
52H300/2SP
• The split design reduces the • Suitable for use in areas subject to
structural load on your roof. freezing conditions.
• Suitable for use with a wide range
of water chemistries (52C Series)

PREMIER LOLINE (Gas boosted) HILINE®

• Indirect design with complete • Ideally suited to warmer climates.
frost protection - ideal for even the
coldest of climates. • Does not require pumps and
controllers.
• Integrated continuous flow gas
booster provides backup during • Relies on water moving through
periods of low or no solar gain. Model Number:
the solar collectors and into the
Model Number: 52D300/2NPT
596270/2SP • The split design reduces the tank using energy absorbed from
structural load on your roof. the sun.

LOLINE
• The multi-riser solar collectors
efficiently absorb energy from the sun. SMALL-SCALE TECHNOLOGY CERTIFICATES
• Economical to purchase. Small-scale Technology Certificates (STCs) provide a financial
• Automatic, electronic controls benefit to encourage the installation of solar water heaters
maximise solar gain. provided under a Federal Government legislated scheme.
Model Number: • Suitable with NPT or LCS collector
511325/2NPT STCs can be created for eligible solar water heater
installations. One STC is equivalent to a megwatt hour
(MWh) of electricity displaced by an eligible system,
over a ten year period.

To find out more about eligibility criteria visit

www.rheem.com.au/rebates

INSTALL A 11
 RHEEM HEAT PUMP
HOT WATER

NEXT GENERATION SOLAR

Traditionally solar water heaters have proven themselves to HOW A HEAT PUMP WORKS
be an energy efficient renewable water heating alternative to
Rheem Heat Pumps deliver hot water by efficiently utilising a
gas and electric systems. And while solar systems continue
free and abundant source of energy – the heat that is in the air
to be an efficient way to heat water, heat pump water heating
around us. Refrigerant vapour compression technology enables
technology also saves on energy consumption and green
the heat pump to intensify this heat, which is used to produce
house gas emissions.
hot water. Rheem Heat Pumps are more efficient during warmer
months, and will operate for less hours during the day than in
colder months of the year. See illustration below.

Works day and night,

as they don’t rely on
daylight to operate.

1. warm air enters

WHY RHEEM HEAT PUMP?
Energy efficient – can save on energy use and greenhouse gas 2. cooler air exits

emissions by up to 61%.24
5. heated water
returns to
No solar collectors – reduces structural load on your roof, and the tank
can be used where roof collectors aren’t suitable.

Replacement for electric water heaters – uses the same

3. cool water 4. heat is transferred
plumbing and electrical connections as an electric water enters from to the water in the
the tank heat pump module
heater, making it an ideal upgrade from a standard electric
water heater.
When power is available, the Heat Pump heating cycle will
2 piece design – results in a reduced handling weight, making continue until the tank is full of hot water.
it easy to deliver and install on site.

Back up element fitted in every model – delivers hot water even

on the coldest of winter nights.

Eligible for incentives – Rheem Heat Pumps are eligible to

receive Small-scale Technology Certificates (STCs).25

5 year cylinder warranty & 2 years on the sealed system.23

12 COMES ON STEADY, HOT AND STRONG

 SOLAR
2 - 6 310-325L
PEOPLE CAPACITY
5 YEAR
CYLINDER
WARRANTY23

THE RIGHT RHEEM FOR YOU

MPi-Series II HDi-310
• Ideal upgrade for an electric storage • Heavy duty model
water heater, featuring common
plumbing and electrical connections. • Top Down Heating delivers 60ºC hot water, fast.

• Can connect to economical extended • High heating power means fast recovery to
off-peak tariffs for maximum savings provide all the hot water you’ll need.
on running costs22.
• Interconnecting design fits onto a standard
• Whisper technology enables quieter outdoor electric water heater footprint.
operation.
• Suitable for cooler climates.
• Heat Pump module is located well
Please note Rheem does not recommend
below the fence line, which keeps
noise away from windows. installation in Zone 5.

• Two piece interconnecting design • LEDs to indicate operating status

Model Number:
allows for easy one-person installation.
551325 Model Number:
• Suitable for warm and tropical 551310
climates. Not available in Tasmania.
• Available in RheemPlus® 50ºC
temperature models.

SMALL-SCALE TECHNOLOGY CERTIFICATES

Small-scale Technology Certificates (STCs) provide a financial
benefit to encourage the installation of solar and heat pump
water heaters through a Federal Government legislated scheme.

This map shows the climate Zones within Australia which will
define the number of STCs allocated to an eligible solar and
heat pump water heater.

As of the 1st of November 2012, Zone 5 was added to the list

of Zones eligible to create STC’s for an eligible Air Sourced Heat
Pump installation. Visit www.cleanenergyregulator.gov.au/ret for
a list of postcodes by Zone, including zone 5.

To claim your STC entitlement, simply complete the STC

Assignment form and attach the necessary documentation.

Visit www.rheem.com.au/rebates to find out how many STCs

apply to Rheem Solar Water Heaters and Heat Pumps by zone
and to download the Rheem STC Assignment form.

INSTALL A 13
 RHEEM ELECTRIC STORAGE
PRODUCT DATA

Warrant y Model
25 25 45 50 80 125 160 250 315 400
Rheem 191 Series Single Element 7 years 1 111025 191025 191045 191050 – – – – – –
111025/ P 191025/ P 191050 / P – – – – – –
Rheem 491 Series Single Element 12 years 2 – – – – 491080 491125 491160 491250 491315 491400
Rheem 492 Series Twin Element 12 years 2 – – – – – – 492160 492250 492315 492400
RheemPlus ® Single Element 12 years 2 – – – – – 421125 421160 421250 421315 –
Hot Water Delivery Litres 21 25 47 ** 50 80 125 160 250 315 400
Storage Capacity Litres 25 29 50 53 90 135 165 270 324 412
Boost Capacity Twin Element – – – – – – 45 50 50 90
Dimensions A mm 390 430 670 695 945 1340 1610 1395 1640 1840
B mm 385 400 400 400 480 480 480 640 640 690
C mm 420 436 436 436 515 515 515 680 680 735
D mm 130 106 347 397 702 1102 1332 1117 1317 1479
E mm 116 142 142 142 64 64 104 73 113 121
F mm 75 60 60 80 66 66 66 103 103 105
G mm – – – – – – 1081 988 1228 1323
H deg 26 26 26 26 24 24 23 32 32 30
J deg 65 64 59 59 60 60 58 88 88 83
K mm – – – – – 545 – 705 705 –
L mm – – – – – 183 183 262 262 –
M deg – – – – – – 58 92 92 97
Approx. Weight Packaged kg 17 19 25 26 38 52 60 82 97 120
Rheem 111025,421 Series RheemPlus® models have left hand connections only.
191, 491 & 492 Series Rheem models have left and right hand connections.
111, 160 to 400 models have TPR valve fitting on the left hand side only.
** Rated hot water delivery is 40L in accordance with AS/NZS 4692.1. Actual hot water delivery is 47L when tested for AS/NZS 4692.1
Technical data is subject to change.

RHEEM 160L-400L

OUTLET RELIEF OUTLET

RHEEM 25L-125L VALVE
RHEEMPLUS 125L, 160L, 250L, 315L
RELIEF RELIEF
OUTLET VALVE VALVE OUTLET
HOT
WATER
OUTLET

A
D
A A D
D G

COLD
WATER
INLET INLET
CABLE INLET INLET CABLE INLET
ENTRY F ENTRY F E CABLE
E E ENTRY F

K
B B B

C C C
Ho
Ho
H o
H
o
J
o

Mo Jo
Jo Jo

Ho C
Jo

LEFT HAND CONNECTIONS

RHEEM 25L (111025 only)

14 COMES ON STEADY, HOT AND STRONG

 RHEEM ELECTRIC STORAGE
STELLAR STAINLESS STEEL

Warrant y 3 Model
®
Rheem Stellar Stainless Steel 50 80 125 160 250 315
Single Element 12 years 4A1050 4A1080 4A1125 4A1160 4A1250 4A1315
Twin Element 12 years 4A2250 4A2315
Hot Water Delivery Litres 50 80 125 160 250 315
Storage Capacity Litres 54 80 135 165 270 324
Boost Capacity Twin Element – – – 52 62
Better than MEPs by 4.8% 24% 17% 12% 19% 17%
Dimensions A mm 695 885 1295 1615 1440 1760
B mm 400 490 490 490 620 620
C mm 432 500 500 500 630 630
D mm 385 510 920 1240 990 1310
E mm 145 185 185 185 230 230
F mm 83 120 110 110 145 145
G mm – – – - 939 1207
H deg 30 25 25 25 30 30
J deg 60 55 55 55 60 60
M mm – 125 125 125 120 120
Approx. Weight Packaged Kg 16 23 31 37 45 54
Technical data is subject to change.

Warranty and conditions

1. Warranty: 7 year cylinder warranty, 3 year labour warranty on the cylinder, 1 year parts and labour warranty on all other components for domestic (non-commercial) installations.
Conditions apply, see the Rheem warranty set out in the product’s Owner’s Guide or view it at www.rheem.com.au/warranty
2. Warranty: 12 year cylinder warranty, 1 year labour warranty on the cylinder, 1 year parts and labour warranty on all other components for domestic (non-commercial) installations.
Conditions apply, see the Rheem warranty set out in the product’s Owner’s Guide or view it at www.rheem.com.au/warranty
3. Warranty: 12 year cylinder warranty, 3 year labour warranty on the cylinder, 1 year parts and labour warranty on all other components for domestic (non-commercial) installations.
Conditions apply, see the Rheem warranty set out in the product’s Owner’s Guide or view it at www.rheem.com.au/warranty
4. MEPS: Minimum Energy Performance Standards are a regulated requirement that electric water heaters sold in Australia must meet. Performance varies by model. Refer to the
Specification table for individual model performance.
5. Up to 42% lighter than comparable Rheem vitreous enamel water heater models of the same capacity.

STELLAR STAINLESS STEEL 80L - 315L

B
HOT WATER
OUTLET

TPR
STELLAR STAINLESS STEEL 50L VALVE

TPR VALVE TPR VALVE

HOT WATER HOT WATER
OUTLET (LH) OUTLET (RH)
A D
COLD
A WATER G
D COLD INLET (RH)
WATER COLD COLD
INLET (LH) POWER LEAD & PLUG WATER WATER
(APPLICABLE INLET CABLE INLET
MODELS ONLY) ENTRY
E E
F

B B

C
O
O H
H
O
J C
O
32.5 O
32.5 O

J
O
O M
M

INSTALL A 15
 RHEEM GAS STORAGE
PRODUCT DATA

MODEL Rheem 4 Star Rheem 5 Star Rheem Stellar ® Rheem Indoor

90 135 170 265 295 330 360 135 170
Model Number 347090 347135 347170 850265 850295 850330 850360 800135 800170
RheemPlus ® – – – 854265 854295 – – – –
Number of People: Moderate Climate 1-3 2-4 3-5 2-4 3-5 2-5 3-6 2-4 3-5
Cool Climate 1-2 2-3 3-4 2-3 3-4 2-4 3-5 2-3 3-4
Warranty (years) 8,9 10 10 10 10 10 10 10 10 10
Gas Type Natural Gas Natural Gas/Propane Natural Gas11 Natural Gas11 NG/Propane Natural Gas
GAS Energy Rating 4.0 4.0 4.1 5.3 5.3 5.2 5.0 3.0 2.8
Storage Capacity (Litres) 90 135 170 130 160 130 160 135 170
Recovery Rate (L/Hour@45ºC) Natural Gas 100 113 113 145 145 200 200 120 126
First Hour Capacity (Litres) 190 248 283 275 305 330 360 255 296
Hourly Gas Consumption (MJ/Hr) Nat/Prop 25/na 27/26 27/26 30/na 30/na 42/na 42/na 30/30 30/na
Dimensions mm
A 1158 1558 1858 1600 1900 1600 1900 1615 1915
B 422 422 422 490 490 485 485 425 425
C 502 502 502 556 556 558 558 500 500
D 588 988 1213 988 1213 988 1213 988 1213
E 328 328 403 332 407 328 409 328 403
F 298 298 298 302 302 298 298 297 297
G 1078 1478 1778 605 605 770 770 1490 1790
H (RheemPlus ® Only) 545 545
J (RheemPlus ® Only) 182 182
K 473 473 473 528 528 520 520 490 490
L 208 208 208 240 240 252 252 213 213
M 300 300 299 299
N 95 95 93 93
Weight Packaged (kg) 53 69 80 90 100 87 101 56 65
Relief Valve Setting (kPa) 1400 1400 1400 1400
Expansion Control Valve Setting (kPa) 1200 1200 1200 1200
Max Water Supply Pressure:
with ECV (kPa) 960 960 960 960
without ECV (kPa) 1120 1120 1120 1120
Water Connections Rp ¾ Rp ¾ Rp ¾ Rp ¾
Water Connections (RheemPlus) G¾B
Gas Connection Rp ½ Rp ½ Rp ½ Rp ½

Warranty and conditions

6. Based on 45ºC temperature rise.
HOT 7. Guide only. Based on a cold water temperature of 15°C.
OUTLET RELIEF VALVE 8. Warranty: 10 year cylinder warranty, 1 year labour on cylinder, 1 year parts and labour
warranty on all other components for domestic (non-commercial) installations.
Conditions apply, see the Rheem warranty set out in the product’s Owner’s Guide or
view it at www.rheem.com.au/warranty
H 9. Stellar Warranty: 10 year cylinder, 3 years labour on cylinder, 1 year parts and labour
B warranty on all other components for domestic (non-commercial) installations.
Conditions apply, see the Rheem warranty set out in the product’s Owner’s Guide or
view it at www.rheem.com.au/warranty
D L J 10. Some applications require a tempering valve in accordance with AS/NZS 3500:4
A RELIEF
VALVE 11. These models are not available in propane.
CK

GLOSSARY OF TERMS
COLD
INLET Recovery rate – the volume of water a heater can reheat in one hour. Measured as
the volume of completely cold water (should the water heater be run completely out)
G
M N that can be heated to 45ºC over the cold water temperature.
GAS First Hour Capacity – a measure of water heater capacity that combines both the
E F INLET stored hot water volume & the hourly recovery rate (eg: if a water heater has storage
capacity of 130L and a recovery rate of 200L/hour, its First Hour Capacity is 330L).

16 COMES ON STEADY, HOT AND STRONG

 RHEEM CONTINUOUS FLOW
PRODUCT DATA

MODEL Rheem 12 Rheem 16 Rheem 20 Rheem 26 Rheem 27 Rheem 27 Internal

Model Number 876812 874812 876T16 874T16 876820 874820 876T26 874T26 876627 874627 866627 864627
Maximum Temperature °C 50 60 50 60 50 60 50 60 50 60 50 60
Number of Bathrooms 1 1 – 1.5 1.5 – 2 2 – 2.5 2.5 – 3 2.5 – 3
Gas Type Natural Gas/Propane Natural Gas/Propane Natural Gas/Propane Natural Gas/Propane Natural Gas/Propane Natural Gas
GAS Energy Rating 6 Stars 6 Stars 6 Stars 6 Stars 6 Stars 6 Stars
Flow Rate L/Min at 25°C Rise12 12L/Min 16L/Min 20L/Min 26L/Min 27L/Min 27L/Min
Minimum Operating Flow Rate 2.0L/Min 2.0L/Min 2.0L/Min 2.0L/Min 2.0L/Min 2.0L/Min
Nominal Gas Consumption 94 MJ/Hr 126 MJ/Hr 157 MJ/Hr 199 MJ/Hr 205 MJ/Hr 205 MJ/Hr
Dimensions
A - Height mm 520 520 520 520 600 650
B - Width mm 355 355 355 355 350 350
C - Depth mm 187 187 187 187 226 250
Depth – from wall to Hot Water Outlet 87 87 87 87 84 107
Depth – from wall to Cold Water Inlet 68 68 68 68 64 86
Depth – from wall to Gas Inlet 77 77 77 77 97 119
Weight (empty) 16kg 16kg 16kg 16kg 23kg 24kg
Max. Water Supply Pressure 1000kPa 1000kPa 1000kPa 1000kPa 1000kPa 1000kPa
Min. Water Supply Pressure 120kPa 120kPa 120kPa 120kPa 140kPa 140kPa
Cold Water Connection R¾ R¾ R¾ R¾ R¾ R¾
Hot Water Connection R¾ R¾ R¾ R¾ R¾ R¾
Gas Connection R¾ R¾ R¾ R¾ R¾ R¾
Temperature Controllers
Kitchen 299850 299850 299850 299850 299850 299850
Bathroom 1 299851 299851 299851 299851 299851 299851
Bathroom 2 299852 299852 299852 299852 299852 299852
Deluxe Temperature Controllers
Kitchen 299858 299858 299858 299858 299858 299858
Bathroom 1 299859 299859 299859 299859 299859 299859
Bathroom 2 299860 299860 299860 299860 299860 299860
Accessories
Pipe Cover 299426 299426 299426 299426 299425
Recess Box 299842 299842 299842 299842 299831 Rheem 27 Internal must
Rheem EZ Link Kit 299291 299291 299291 299291 299291 only be installed using
certified Rheem coaxial
Wall Mount Security Kit 299868 299868 299868 299868 299868
flue components.
Security Cage 299867 299867 299867 299867 299867 Do not use any other
Flue Diverter (Standard) 299287 299287 – 299287 – type of flue system.
Flue Diverter (Extended) – – – 299285 –
Rheem EZiSET® kit - 052310 Suitable for models: Rheem 12 (876812), Rheem Metro 16 (876T16), Rheem 20 (876820), Rheem Metro 26 (876T26), Rheem 27 (876627, 876027,
866627, 866027). Suitable for Rheem 12-26L manufactured since 2018, and all Rheem 27L models.

RHEEM 12 /16 / 20 / 26 RHEEM 27

B
HOT WATER
OUTLET GAS POWER LEAD GAS
CONNECTION CONNECTION CONNECTION

A POWER LEAD COLD WATER HOT WATER COLD WATER

CONNECTION INLET OUTLET INLET

Warranty and conditions

12. Guide only, subject to ambient water temperature and pressure, correct pipe sizing and appliance
flow rates.
13. 50ºC factory pre-set models supply hot water at a maximum 50ºC at all outlets in accordance with
AS3498. Some applications may require tempering, refer to AS 3500:4. 60ºC models must have a
tempering valve installed in accordance with AS 3500:4
14. Warranty: 10 Years parts and 3 Years labour on Heat Exchanger, 3 Years parts & labour on other
GAS components, when installed in a domestic dwelling. For all other installations, the warranty period
INLET is 1 Year parts and labour on Heat Exchanger and other components. Conditions apply, see the
HOT WATER
OUTLET C Rheem warranty set out in the product’s Owner’s Guide or view it at www.rheem.com.au/warranty
COLD WATER
INLET 15. Applies to 70ºC capable models when set to 70ºC

INSTALL A 17
 RHEEM SOLAR
PRODUCT DATA

RHEEM PREMIER® HILINE SOLAR HOT WATER HEATER - Electric and Gas boosted
VITREOUS ENA MEL TANK S TAINLES S S TEEL TANK
MODEL - Electric Boosted 52C300 /2NP T 52H180 /1SP 52H300 /2SP
MODEL - Gas Boosted 52C300 /2NP T-G 52H180 /1SP-G 52H300 /2SP-G
Storage Capacity L 300 180 300
Solar Collectors 2 1 2
Booster Type Electric Gas -remote Electric Gas -remote Electric Gas -remote
Boost Capacity L 150 26L /min 90 26L /min 150 26L /min
People Per Household 2-5 2-5 1-2 1-3 2-5 2-5
Dimensions & Specifications
Height (A) mm 2480 2520 2520
Width (B) mm 2425 1495 2198
Depth (C) mm 510 563 563
Weight Empty – Tank kg 109 53 78
Weight Full – Tank kg 409 233 378
Weight Empty – Solar Collectors kg 72 50 100
Weight Full – Solar Collectors kg 75 54 108

RHEEM HILINE® SOLAR HOT WATER HEATER

GAS BOOS TED ELECTRIC BOOS TED
MODEL 52D180 /1NP T-G 52D300 /2NP T-G 52D180 /1NP T 52D300 /2NP T
Storage Capacity L 160 300 160 300
SoIar Collectors NPT200 1 2 1 2
Booster Type Gas – Remote Gas – Remote Electric Electric
Boost Capacity L 26L /min 26L /min 80 160
People Per Household 1-3 2-5 1-2 2-5
Dimensions & Specifications
Height (A) mm 2480 2480 2480 2480
Width (B) mm 1595 2410 1595 2410
Depth (C) mm 510 510 510 510
Weight Empty – Tank kg 62 91 62 91
Weight Full – Tank kg 242 391 242 391
Weight Empty – Solar Collectors kg 39 78 39 78
Weight Full – Solar Collectors kg 41 82 41 82

RHEEM PREMIER® LOLINE SOLAR HOT WATER HEATER

GAS BOOS TED ELECTRIC BOOS TED
596270 /1SP-G 596270 /2SP-G 591270 /2SP 591270 /3SP
MODEL
596270 /1CS07-G 596270 /2CS07-G 591270 /2CS07 591270 /3CS07
Storage Capacity L 270 270 270 270
Solar Collectors 1 2 2 3
Booster Type Gas – Integrated Gas – Integrated Electric Electric
Boost Capacity L 26L /min 26L /min 125 125
People Per Household 2-5 2-5 1-3 2-4
Dimensions & Specifications
Height (A) mm 1787 1787 1775 1775
Width (B) mm 650 650 650 650
Depth (C) mm 890 890 682 682
Cold In (D) mm 772 772 377 377
Hot Out (E) mm 772 772 1078 1078
Weight Empty – Tank kg 165 165 146 146
Weight Full – Tank kg 435 435 416 416
Weight Empty – Solar Collectors kg 50 100 100 150
Weight Full – Solar Collectors kg 54 108 108 162

RHEEM LOLINE SOLAR HOT WATER HEATER

GAS BOOS TED ELECTRIC BOOS TED
511271/2NP T-G 511325 /2NP T-G 511410 /3NP T-G 511271/2NP T 511325 / 2NP T 511410 /3NP T
MODEL
511271/2LCS-G* 511325 /2LCS-G* 511410 /3LCS-G* 511271/2LCS* 511325 /2LCS* 511410 /3LCS*
Storage Capacity L 270 325 410 270 325 410
Solar Collectors 2 2 3 2 2 3
Booster Type Gas – Remote Gas – Remote Gas – Remote Electric Electric Electric
Boost Capacity L 26L /min 26L /min 26L /min 140 170 220
People Per Household 2-5 2-6 3-7 1-3 2-4 3-6
Dimensions & Specifications
Height (A) mm 1395 1640 1840 1395 1640 1840
Width (B) mm 640 640 690 640 640 690
Depth (C) mm 680 680 730 680 680 730
Cold In (D) mm 73 73 81 73 73 81
Hot Out (E) mm 1117 1357 1519 1117 1357 1519
Weight Empty – Tank kg 82 93 116 82 93 116
Weight Full – Tank kg 352 418 526 352 418 526
Weight Empty – Solar Collectors kg 78 78 117 78 78 117
Weight Full – Solar Collectors kg 82 82 123 82 82 123
*LCS Collectors are only available for installation in zones 3 & 4.

18 COMES ON STEADY, HOT AND STRONG

RHEEM PREMIER® HILINE SOLAR HOT WATER HEATER RHEEM HILINE ® SOLAR HOT WATER HEATER

C C

C
C

A A
B
B

A B A B

RHEEM PREMIER® LOLINE SOLAR HOT WATER HEATER RHEEM LOLINE SOLAR HOT WATER HEATER
596 SERIES 591 SERIES 511271/511325
& 511410
B B

E
A A A
E

D&E

Warranty and conditions

G

16. Energy savings of up to 60% to 70% based on Australian Government Approved TRNSYS
simulation modelling of a Rheem Loline with 2xNPT200 collectors, a Rheem Hiline with
2xNPT200 collectors or Rheem Premier Hiline with 2xSPA2000 collectors and using a
medium load in Zone 3 and apply when replacing an electric water heater.
17. Warranty: Rheem Premier ® Loline/Loline/Hiline/Premier Hiline ® (52C Model) 5 year
supply on cylinder and solar collectors, 3 year labour on cylinder, 1 year labour on
collectors, 1 year parts and labour. Applies to a single-family domesitc dwelling
installation only. Conditions apply, see the Rheem warranty set out in the product’s
H
Owners Guide or view it at www.rheem.com.au/warranty
18. Warranty: Rheem Premier ® Hiline (52H Models) 7 year supply on cylinder, 5 year supply
on solar collectors, 1 year labour on cylinder, 1 year labour on collectors, 1 year parts
including labour. Applies to a single-family domestic dwelling installation only. Conditions
apply, see the Rheem warranty set out in the product’s Owners Guide or view it at www.
rheem.com.au/warranty
SOLAR COLLECTOR MODELS
19. Greenhouse gas emission savings based upon installing a Rheem Loline Solar Hot Water
Dimensions and Specifications heater with 2xNPT200 collectors, a Rheem Hiline with 2xNPT200 collectors or Rheem
LCS, CSA2007, Premier Hiline with 2xSPA2000 collectors and using a medium load in Zone 3, when
replacing an electric water heater.
NPT200 SPA2000
20. Any financial savings will vary depending upon type of Rheem Solar system installed,
Width (F) mm 1023 1043 orientation and inclination of the solar collectors, type of water heater being replaced, hot
water consumption and fuel tariff. Maximum financial savings off your hot water bill are
Height (G) mm 1941 1996 achievable when replacing an electric water heater on continuous tariff.
Depth (H) mm 83 82 21. Eligibility criteria apply. STC Incentive/benefit scheme is subject to change without notice.

INSTALL A 19
 RHEEM HEAT PUMP
PRODUCT DATA

MODEL HDi-310 MPi-325

Product Code 551310 551325
RheemPlus ® 554325
Number of People (Moderate Climate) 3-6 2-5 2-5
Dimensions
Height (mm)
Module: D N/A 1018 1018
Tank: A 1870 1631 1636
Width B (mm) 670 894 1073
Depth C (mm) 679 638 638
Weight
Heat Pump module (kg) 48 42 42
Tank (kg) 87 88 90
Technical
Capacity (L) 310 325 325
Power input (Watts) 1300 800 800
Refrigerant R134a R134a R134a
Element Sizes (kW) 3.6 3.6 3.6
Boost Capacity (L) 220 180 180
Water Connections & Settings
Inlet (Rp) ¾ ¾ ¾
Outlet (Rp) ¾ ¾ ¾
Tank Relief Valve Setting (kPa) 1000 1000 1000
ECV Setting (kPa) 850 850 850
Maximum Mains Pressure
With ECV (kPa) 680 680 680
Without ECV (kPa 800 800 800
Min. Water Supply Pressure (kPa) 200 200 200

HDi-310 MPi Series II

A A

D
RHE249 Rheem Domestic Range brochure

B
B C

Warranty and conditions

22. The impact on an electricity account will depend on the tariff arrangement of the water heater being replaced and where you live. These Heat Pump water heaters (model / climate
dependant) are recommended to either 24 hour continuous tariff or extended off-peak (min 16 hours/day). If replacing an electric water heater greater than 250 litres, heat pump
connection to 24 hour continuous tariff is recommended. Before purchase consult your energy provider for more information on cost comparisons.
Printed Jan 2019

23. Warranty: 5 year supply on cylinder, 3 year labour on cylinder, 2 year supply on sealed system including labour, 1 year supply on all other parts including labour. Applies to a single family
domestic dwelling installation only. Phone 131 031 for details. Conditions apply, see the Rheem warranty set out in the product’s Owner’s Guide or view it at www.rheem.com.au/warranty
24. Energy and greenhouse gas emissions reduction of up to 61% based on Australian Government Approved TRNSYS simulation modelling of a Rheem 551310 and Rheem 551325 heat
pump water heater and apply when replacing an electric water heater in Zone 3.
25. Eligibility criteria apply. STC incentive/benefit scheme is subject to change without notice.

20 COMES ON STEADY, HOT AND STRONG INSTALL A