Tinius Olsen

ST Series
Electromechanical
ST0000EN02

Universal Testing Machines

ST Series

T
he ST Series of chambers and more can be used in have one of the best, most accurate
electromechanical testing conjunction with these test frames repeatable, flexible and easy-to-use
machines from Tinius Olsen and Horizon software to ensure you systems on the market today.
is designed to test a wide range of
materials including, but not limited
to: plastics, films, paper, packaging HORIZON SOFTWARE
materials, filter material, adhesives, Our Horizon software sets new standards of data analysis by adding a host
foils, food, toys, medical devices and of report writing and data manipulation capabilities that will make easy
components, in tension, compression, work of your materials testing programs, whether they’re designed for
flexure, shear and peel. the demanding rigors of R&D or the charting and analysis functions of QC
All ST series machines can be used testing. In addition, Horizon Materials Testing software is networkable and
with selection of handheld interfaces scalable so operators and managers can operate equipment and review test
or a virtual machine interface results from multiple sources and locations.
running on a connected PC. Powerful
data analysis and machine control
software (our Horizon Materials
Testing software) can be added to
your system to provide a library of
standardized test routines, generate a
complete graphical result of your test,
and perform sophisticated powerful
analyses on the test data to
produce the test report you need.
A comprehensive selection of
self-identifying load cells, grips and
fixtures hold the simplest to most
complex specimen profiles, strain
measurement instruments employ
different technologies, temperature

CONTROLLER
INTERFACES
ST systems can be
operated by a choice of
different interface panels.
Choose from tethered,
wireless or a virtual
interface running on a
connected PC.

This virtual interface

runs on a connected
PC and can be used to The Bluetooth connected The tethered interface
set up and run a test to interface features easy option features larger tactile
provide a quick numerical to operate tactile buttons feedback buttons to operate
result. The addition of and a high resolution the testing frame; these are
Horizon software with touchscreen to set up ideal for users who need to
any of these interfaces and monitor tests where wear protective gloves while
allows complex tests to parameters and results are operating the machine.
be created and recalled, shown numerically. The The display provides
along with sophisticated interface also features an simple numerical display of
data analysis of all 8MP camera and has WiFi individual channels used on
graphical data. connectivity. the testing machine.

2 2
www.tiniusolsen.com
KEY FEATURES

T SLOTS
To keep the testing area as open,
uncluttered and flexible as possible,
each test system features T slots in
the columns. These T slots can be
used to attach the handheld interface,
a video camera stand, automatic
extensometer support and strain
gage or LVDT extensometer support
and swing-away guards and shields
etc, using vibration-free articulating
arms. By keeping the test area as
uncluttered as possible, unrestricted
access to chambers and test tanks is
maintained.

ACCURACY
We have the most robust, reliable
and accurate load measuring systems
available in the machine. This system
allows us to achieve an accuracy of BUILT-IN
better than 0.2% of the reading from PNEUMATIC
0.2-100% of the load cell capacity. SUPPLY EXTENSOMETERS
Connections for compressed air built Full complement of video, automatic,
DATA RATE into the machine (a compressed air encoder, laser, strain gage and LVDT
Internal sample and update frequency inlet is supplied on the rear of the extensometers are available for the
can be up to 2.73k samples per second machine). This allows operation of determination of specimen strain.
per channel while the data transfer pneumatic grips without long air
rate to a computer running Horizon supply lines obstructing the test area.
software via USB2 connection is
restricted to 1kHz to ensure data is
free of noise and spikes and prevents
erroneous results being reported.

ACCESSORY
CONNECTIVITY
Up to a maximum of four connections
can be made with the test frame via a
built-in accessory connection panel on
the machine.

www.tiniusolsen.com 3
BENCH MACHINE OPTIONS

T
he Tinius Olsen benchtop range Model 5ST – 5kN
of ST models features both (500kg/1,000lbf) Shown
single and dual column frames. with Bluetooth-enabled
handheld interface.
The single column models have frame
capacities of 1kN (100kgf/200lbf) Model 50ST – 50kN
(5,000kg/11,000lbf)
and 5kN (500kgf/1,100lbf), while
Shown with
dual column models are available in Bluetooth-enabled,
capacities of 10kN (1,000kgf/2,200lbf), wireless handheld
interface.
25kN (2,500kgf/5,000lbf) and 50kN
(5,000kgf/11,000lbf), and are designed
to test a vast range of materials
and finished products for strength
properties in tension, compression,
flexure, shear, tear and peel.
They provide the ultimate in
durability, speed, accuracy and
convenience and feature high
precision, interchangeable strain
gage load cells for capturing applied
load data. This design allows rapid
change of machine capacity from
as little as 0.2% of the capacity
of the smallest load cell to the
maximum frame capacity in a very Model
25ST – 25kN
simple process.
(2,500kg/5,000lbf)
The construction of the machine Shown with
frame, leadscrews and drive system tethered handheld
interface.
make them unique. Even at full
capacity, these frames have excellent
rigidity with negligible frame
deflection. Model 10ST – 10kN
(1,000kg/2,000lbf)
The machines can be operated at Shown with
speeds ranging from a minimum of Bluetooth-enabled,
0.001mm/min (0.04 thousandths of wireless handheld
interface.
an inch per minute) to a maximum
of up to 1000mm/min (40 inches per
minute), depending on frame size,
which accommodates a wide range of
materials and specimens.
Frame flexibility is further
extended by a wide array of
accessories including various optical
and electronic extensometers,
compressometers and deflectometers,
hot and cold temperature test
chambers for sample conditioning and
testing, high temperature furnaces Model 1ST – 1kN
(with high temperature-capable (100kg/200lbf) Shown
with tethered handheld
extensometers), as well as grips, interface and Horizon
holders, jigs and platens for holding software.
the test specimens.
These test frames can be modified
by adding extra height to the test
area by up to an additional 400mm.
Contact your sales representative for
further details.

4 4
www.tiniusolsen.com
SPECIFICATIONS
MODEL 1ST 5ST 10ST 25ST 50ST
kN 1 5 10 25 50
Capacity
lbf 200 1,000 2,000 5,000 11,000
mm/min 0.001-1000 0.001-1000 0.001-1000 0.001-1000 0.001-500
Test speed range
in/min 0.000039-39.37 0.000039-39.37 0.000039-39.37 0.000039-39.37 0.000039-39.37
mm – – 410 410 410
Clearance between columns
in – – 16.14 16.14 16.14
mm 100 100 – – –
Throat depth
in 3.94 3.94 – – –
mm 755 755 1100 1100 1065
Max crosshead travel
in 29.72 29.72 42.91 42.91 41.93
mm 1168 x 511 x 467 1168 x 511 x 467 1625 x 729 x 506 1625 x 729 x 506 1655 x 729 x 506
Dimensions (HxWxD) in 45.98 x 20.12 x 45.98 x 20.12 x 63.98 x 28.7 x 19.92 63.98 x 28.7 x 19.92 65.15 x 28.7 x 19.92
18.38 18.38
kg 46 46 130 130 163
Weight
lb 101 101 287 287 359

MODEL 100ST 150ST 300ST NOTES

kN 100 150 300
Capacity ●● L oad weighing system meets or
lbf 20,000 30,000 60,000
mm/min 0.001-500 0.001-500 0.001-500 exceeds the requirements of the
Test speed range following standards: ASTM E4, ISO
in/min 0.000039-19.69 0.000039-19.69 0.000039-19.69 7500-1, and EN 10002-2. Tinius
mm 656 656 656 Olsen recommends that systems
Clearance between columns
in 25.83 25.83 25.83 are verified at installation in
mm 1198 1173 1173 accordance with ASTM E4 and ISO
Max crosshead travel 75001.
in 47.17 46.18 46.18
mm 2323 x 1205 x 700 2323 x 1205 x 700 2323 x 1205 x 700
Dimensions (HxWxD) ●●  train measurement system meets
S
in 91.46 x 47.44 x 27.56 91.46 x 47.44 x 27.56 91.46 x 47.44 x 27.56 or exceeds the requirements of the
kg 778 954 1125 following standards: ASTM E83,
Weight
lb 1715 2103 2480 ISO 9513 and EN 10002-4.
●● Other speed range and crosshead
travel are optional,please contact
sales manger for more details.
●●  pecifications are subject to
S
change without notice.

www.tiniusolsen.com 5
FLOOR MACHINE OPTIONS

To keep the testing area as open,

T
hese Tinius Olsen floor uncluttered and flexible as possible, each
test system features T slots in the columns.
standing ST models have frame
These T slots can be used to attach the
capacities of 100kN, 150kN, handheld controller, a video camera stand,
and 300kN (20,000lbf, 30,000lbf, automatic extensometer support, an strain
gage or LVDT extensometer support and
and 60,000lbf respectively) and
swing-away guards and shields etc, using
are designed to test a vast range of vibration-free articulating arms. By keeping
materials including, but not limited the test area as uncluttered as possible,
unrestricted access to chambers and test
to: rigid and reinforced plastics,
tanks is maintained.
composites, geotextiles, sheet metal,
welded specimens, adhesives, and
medical products and components, in
tension, compression, flexure, shear,
tear and peel.
These frames feature high
precision, interchangeable strain
gage load cells for capturing applied
load data. This design allows rapid
change of machine capacity from as
little as 0.2% of the capacity of the
Choice of control panels
smallest load cell to the maximum available for all ST series
frame capacity in a very simple machines: tethered panel,
process. Bluetooth wireless control
panel or a software-based
The construction of the machine virtual control panel.
frame and drive system make them
unique. Even at full capacity, these
frames have excellent rigidity with
negligible frame deflection.
This design allows frame flexibility
for both tension and compression
tests. Users can load heavy specimens
with minimal effort. This feature is
further enhanced by a programmable
switch mechanism that allows
rapid setting of the upper and lower
crosshead limits at any point within
the frame’s clearance.
The machines can be operated
at speeds ranging from a minimum
of 0.001mm/min (0.4 thousandths of
an inch per minute) to a maximum of
500mm/min (20 inches per minute),
which accommodates a wide range
of materials and specimens.
Frame flexibility is further
extended by a wide array
of accessories including
various optical and electronic
extensometers, compressometers
and deflectometers, hot and cold
temperature test chambers for
sample conditioning and testing, high
temperature furnaces (with high
temperature capable extensometers), The ST Series accommodates a wide
as well as grips, holders, jigs, range of test accessories and facilitates
and platens for holding the test changes in minutes.

specimens.

6 6
www.tiniusolsen.com
Software

T
inius Olsen has built upon its long
history of providing solutions to an
enormous variety of testing problems to “Horizon makes testing simple,
develop Horizon, a comprehensive software
program that makes testing simple, precise precise and efficient”
and efficient.
Whether the test sample is metal, paper,
composite, polymer, rubber, textile, or a
micro-component, Tinius Olsen’s Horizon
software goes far beyond data collection
and presentation. It will help automate
operations from R&D to the charting and
analysis of QC testing.
Our Horizon software sets new
standards of data analysis by adding a host
of report writing and data manipulation
capabilities that will make easy work of your
materials testing programs. As with most
features of Horizon, flexibility is key; reports
can be customized by operators in any way
they wish, as can all user screens, allowing
operators to focus on features that are most
important to them.
In addition to powerful reports, Horizon
Materials Testing software is networkable
and scalable so operators and managers can
operate equipment and review test results
from multiple sources and locations. Horizon
provides a library of standard, specific and
application-focused test routines that have
been developed in close co-operation with
customers around the world and to the
standards they are using.
Among the many valuable features
offered by Horizon are: a test routine library;
simultaneous multiple machine control;
test, output, method and result editors; and
multilayered security. This software is designed
for data acquisition, data analysis, and closed
loop control of nearly all Tinius Olsen testing
machines.
Horizon is rich with capabilities that
improve productivity and enable you to build,
access and use a modern, powerful materials
testing database. It employs the latest
Windows environments,
running on
touchscreen-enabled
monitors, to create
an intuitive user
experience. Built-
in tutorials,
online help, and
help desk access
provide additional
user support.

www.tiniusolsen.com 7
 Tinius Olsen
ST Series
Electromechanical
Universal Testing Machines

www.tiniusolsen.com
[email protected]

• Horsham, PA, USA • Redhill, Surrey, UK

• Noida, UP, India • Shanghai, PR China

8 8
www.tiniusolsen.com