Scribd Logo
Upload

Welcome to Scribd!

  • 82 views

    BT139X800

    Uploaded by

    Emilio Escalante
    The document describes TRIAC components rated for 16A current. Specifically: - The NTE56058-56060 TRIACs can block voltages up to 500-800V and conduct currents up to 16A continuously. - They have maximum ratings for non-repetitive surge currents up to 150A and fusing currents up to 98A^2 seconds. - Electrical characteristics include on-state voltages around 1.2-1.6V, gate trigger currents of 5-70mA, and turn-on times under 2 microseconds.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    BT139X800

    Uploaded by

    Emilio Escalante
    82 views2 pages
    The document describes TRIAC components rated for 16A current. Specifically: - The NTE56058-56060 TRIACs can block voltages up to 500-800V and conduct currents up to 16A continuously. - They have maximum ratings for non-repetitive surge currents up to 150A and fusing currents up to 98A^2 seconds. - Electrical characteristics include on-state voltages around 1.2-1.6V, gate trigger currents of 5-70mA, and turn-on times under 2 microseconds.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes TRIAC components rated for 16A current. Specifically: - The NTE56058-56060 TRIACs can block voltages up to 500-800V and conduct currents up to 16A continuously. - They have maximum ratings for non-repetitive surge currents up to 150A and fusing currents up to 98A^2 seconds. - Electrical characteristics include on-state voltages around 1.2-1.6V, gate trigger currents of 5-70mA, and turn-on times under 2 microseconds.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    82 views2 pages

    BT139X800

    Uploaded by

    Emilio Escalante
    The document describes TRIAC components rated for 16A current. Specifically: - The NTE56058-56060 TRIACs can block voltages up to 500-800V and conduct currents up to 16A continuously. - They have maximum ratings for non-repetitive surge currents up to 150A and fusing currents up to 98A^2 seconds. - Electrical characteristics include on-state voltages around 1.2-1.6V, gate trigger currents of 5-70mA, and turn-on times under 2 microseconds.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    NTE56058 thru NTE56060

    TRIAC, 16A

    Description:
    The NTE56058 through NTE56060 are glass passivated TRIACs in an isolated full–pack type package
    designed for use in applications requiring high bidirectional transient and blocking voltage capability and
    high thermal cycling performance. Typical applications include motor control, industrial and domestic
    lighting, heating and static switching.

    Absolute Maximum Ratings:


    Repetitive Peak Off–Sate Voltage, VDRM
    NTE56058 (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500V
    NTE56059 (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600V
    NTE56060 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 800V
    RMS On–State Current (Full Sine Wave, THS ≤ 38°C), IT(RMS) . . . . . . . . . . . . . . . . . . . . . . . . . . 16A
    Non–Repetitive Peak On–State Current, ITSM
    (Full Sine Wave, TJ = +125°C prior to Surge, with Reapplied VDRMmax)
    t = 20ms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140A
    t = 16.7ms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150A
    I t for Fusing (t = 10ms), I2t . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98A2sec
    2

    Repetitive Rate–of–Rise of On–State Current after Triggering, dIT/dt


    (ITM = 20A, IG = 0.2A, dIG/dt = 0.2A/µs)
    MT2 (+), G (+) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50A/µs
    MT2 (+), G (–) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50A/µs
    MT2 (–), G (–) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50A/µs
    MT2 (–), G (+) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10A/µs
    Peak Gate Current, IGM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2A
    Peak Gate Voltage, VGM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5V
    Peak Gate Power, PGM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5W
    Average Gate Power (Over Any 20ms Period), PG(AV) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500mW
    Operating Junction Temperature, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +125°C
    Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40° to +150°C
    Thermal Resistance, Junction–to–Heatsink (Full or Half Cycle), RthJHS
    With Heatsink Compound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.0K/W
    Without Heatsink Compound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5K/W
    Typical Thermal Resistance, Junction–to–Ambient, RthJA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55K/W
    Note 1. Although not recommended, off–state voltages up to 800V may be applied without damage,
    but the TRIAC may switch to the on–state. The rate–of–rise of current should not exceed
    15A/µs.
    Electrical Characteristics: (TJ = +25°C unless otherwise specfied)
    Parameter Symbol Test Conditions Min Typ Max Unit
    Static Characteristics
    Gate Trigger Current
    MT2 (+), G (+) IGT VD = 12V, IT = 0.1A – 5 35 mA
    MT2 (+), G (–) – 8 35 mA
    MT2 (–), G (–) – 10 35 mA
    MT2 (–), G (+) – 22 70 mA
    Latching Current
    MT2 (+), G (+) IL VD = 12V, IT = 0.1A – 7 40 mA
    MT2 (+), G (–) – 20 60 mA
    MT2 (–), G (–) – 8 40 mA
    MT2 (–), G (+) – 10 60 mA
    Holding Current IH VD = 12V, IT = 0.1A – 6 30 mA
    On–State Voltage VT IT = 20A – 1.2 1.6 V
    Gate Trigger Voltage VGT VD = 12V, IT = 0.1A – 0.7 1.5 V
    VD = 400V, IT = 0.1A, TJ = +125°C 0.25 0.4 – V
    Off–State Leakage Current ID VD = VDRMmax, TJ = +125°C – 0.1 0.5 mA
    Dynamic Characteristics
    Critical Rate–of–Rise of dVD/dt VDM = 67% VDRMmax, TJ = +125°C, 100 250 – V/µs
    Off–State Voltage Exponential Waveform, Gate Open
    Critical Rate–of–Change of dVcom/dt VDM = 400V, TJ = +95°C, ITRMS = 16A, – 20 – V/µs
    Commutating Voltage dIcom/dt = 7.2A/ms, Gate Open
    Gate Controlled Turn–On Time tgt ITM = 20A, VD = VDRMmax, IG = 0.1A, – 2 – µs
    dIG/dt = 5A/µs
    Isolation Characteristics
    RMS Isolation Voltage from All VISOL R.H. ≤ 65%, Clean and Dustfree – – 1500 V
    3 Pins to External Heatsink
    Capacitance from T2 to CISOL f = 1MHz – 12 – pF
    External Heatsink

    .402 (10.2) Max .173 (4.4)


    Max
    .224 (5.7) Max .114 (2.9)
    .122 (3.1) Max
    Dia

    .295
    (7.5)
    .669 .165
    (17.0) (4.2)
    Max

    MT1 MT2 G

    .531
    (13.5)
    Min

    .100 (2.54) .059 (1.5) Max

    You might also like