Printing and Its Types

PRINTING AND ITS TYPES
Dr. S.Grace Annapoorani and K.Saranya
Associate Professor and PhD Research Scholar
Department of textiles and apparel design
Bharathiar University, Coimbatore - India
Textile printing is one branch of textile wet processing technology. It is one kind of dyeing.
Printing is carried out after pre-treatment of fabric or after dyeing of the fabric. It is the
process of applying color to fabric in definite patterns or designs. In properly printed fabrics
the color is bonded with the fiber, so as to resist washing and friction. Textile printing is
related to dyeing but, whereas in dyeing proper the whole fabric is uniformly covered with
one color, in printing one or more colors are applied to it in certain parts only, and in sharply
defined patterns.
Textile printing process
PRINTING PROCEDURE
Applying coloured patterns and designs to decorate a

finished fabric is called 'Printing'. In a proper printed
fabric, the colour is affixed to the fiber, so that it may not
be affected by washing and friction. Whether a fabric is
dyed or printed can be known by examining the outline
of the design. On a printed fabric, the outline of a design is sharply defined on the outer side.
The design generally do not penetrate to the back of the cloth. However, the design may show
up on the reverse side of transparently thin fabrics. These fabrics may be confused with the
woven designs where yarn dyed warp and filling are used. If the design is printed on such a
fabric, the yarns will show some areas on which colour is not equally distributed.
The Dyes used for printing mostly include vat, reactive, naphthol and disperse colours which
have good fastness properties. The pigments, which are not truly dyes, are also used
extensively for printing. These colours are fixed to the fiber through resins that are very
resistant to laundering or drycleaning. Pigments are among the fastest known colours and are
effective for light to medium shades. If used for applying dark colours, they may crock or rub
off. Improved resins, better pigments or more effective anticrock agents must be used to solve
this problem. Cheap prints are made from basic colours mixed with tartar emetic and tannic
acid but they are not acceptable in todays market.
For cotton printing vat and reactive dyes are generally used. Silk is usually printed with acid
colours. Wool is printed with acid or chrome dyes but before printing it is treated with
chlorine to make it more receptive to colours. Manmade fibers are generally printed with
disperse and cationic dyes.
METHODS OF PRINTING
Three different approaches or techniques are prevalent for printing colour on a fabric:
 Direct,
 Discharge and Resist
DIRECT PRINTING
It is the most common approach to apply a colour pattern on fabric. It can be done on white
or a coloured fabric. If done on coloured fabric, it is known as overprinting. The desired
pattern is produced by imprinting dye on the fabric in a paste form. To prepare the print
paste, a thickening agent is added to a limited amount of water and dye is dissolved in it.
Earlier corn starch was preferred as a thickening agent for cotton printing. Nowadays gums or
alginates derived from seaweed are preferred because they are easier to wash out, do not
themselves absorb any colour and allow better penetration of colour. Most pigment printing is
done without thickeners as the mixing up of resins, solvents and water itself produces
thickening.
DISCHARGE PRINTING
In this approach, the fabric is dyed in piece and then

it is printed with a chemical that destroys the colour
in the designed areas. Sometimes, the base colour is
removed and another colour is printed in its place.
The printed fabric is steamed and then thoroughly
washed. This approach is on decline these days.
RESIST PRINTING
In this technique, a resist paste is imprinted on the fabric and then it is dyed. The dye affects
only those parts that are not covered by the resist paste. After dyeing, the resist paste is
removed leaving a pattern on a dark background.
There are various methods of printing in which one of the above three techniques is used -
Block Printing, Roller Printing, Duplex Printing, Stencil Printing, Screen Printing, Transfer
Printing, Blotch Printing, Jet Spray Printing, Electrostatic Printing, Photo Printing,
Differential Printing, Warp Printing, Batik Dyeing, Tie Dyeing, Airbrush (Spray) Painting
and Digital printing
BLOCK PRINTING
The designs are carved on a wooden or metal block

and the paste dyestuff is applied to the design on the
face of the block. The block is pressed down firmly
by hand on the surface of the fabric.
ROLLER PRINTING
In this machine counterpart of block printing, engraved copper cylinders or rollers are used in
place of handcarved blocks. With each revolution of the roller, a repeat of the design is
printed. The printed cloth is passed into a drying and then a steam chamber where the
moisture and heat sets the dye.
DUPLEX PRINTING
Printing is done on both sides of the fabric either through roller printing machine in two
operations or a duplex printing machine in a single operation.
SCREEN PRINTING
It is done either with flat or cylindrical screens made of silk

threads, nylon, polyester, vinyon or metal. The printing paste
or dye is poured on the screen and forced through its
unblocked areas onto the fabric. Based on the type of the
screen used, it is known as 'Flat Screen Printing' or 'Rotary
Screen Printing'.
STENCIL PRINTING
The design is first cut in cardboard, wood or metal. The stencils may have fine delicate
designs or large spaces through which colour is applied on the fabric. Its use is limited due to
high costs involved.
TRANSFER PRINTING
The design on a paper is transferred to a fabric by vaporization. There are two main processes
for this- Dry Heat Transfer Printing and Wet Heat Transfer Printing. In Conventional Heat
Transfer Printing, an electrically heated cylinder is used that presses a fabric against a printed
paper placed on a heat resistant blanket. In Infrared Heat Vacuum Transfer Printing, the
transfer paper and fabric are passed between infrared heaters and a perforated cylinder which
are protected from excessive heat by a shield. The Wet Heat Transfer Printing uses heat in a
wet atmosphere for vaporizing the dye pattern from paper to fabric.
BLOTCH PRINTING
It is a direct printing technique where the background colour and the design are both printed
onto a white fabric usually in a one operation. Any of the methods like block, roller or screen
may be used.
AIRBRUSH (SPRAY) PAINTING
Designs may be hand painted on fabric or the dye may be

applied with a mechanized airbrush which blows or sprays
colour on the fabric
ELECTROSTATIC PRINTING
A dye- resin mixture is spread on a screen bearing the design and the fabric is passed into an
electrostatic field under the screen. The dye- resin mixture is pulled by the electrostatic field
through the pattern area onto the fabric.
PHOTO PRINTING
The fabric is coated with a chemical that is sensitive to light and then any photograph may be
printed on it.
DIFFERENTIAL PRINTING
It is a technique of printing tufted material made of yarns having different dyeing properties
such as carpets. Upto a ten colour effect is possible by careful selection of yarns, dyestuffs
and pattern.
WARP PRINTING
It is roller printing applied to warp yarns before they are woven into
fabric.
TIE DYEING
Firm knots are tied in the cloth before it is immersed in a dye. The outside of the immersed
portion is dyed but the inside is not penetrated. There are various forms of Tie dyeing like
Ikat Dyeing where bundles of warp and/ or weft yarns are tie dyed prior to their weaving. In
Plangi Dyeing the gathered, folded or rolled fabric is usually held with stitching to form
specific patterns.
BATIK DYEING
It is a resist dyeing process. Designs are made with wax on a

fabric which is then immersed in a dye. The unwaxed portion
absorbs the colour.
JET SPRAY PRINTING
Designs are imparted to fabrics by spraying colours in a controlled manner through nozzles.
DIGITAL PRINTING
In this form of printing micro-sized droplets of dye are placed

onto the fabric through an inkjet print head. The print system
software interprets the data supplied by
academic_Textiledigital image file. The digital image file has
the data to control the droplet output so that the image quality
and color control may be achieved. This is the latest
development in textile printing and is expanding very fast.
Digital

Printing and Its Types

Uploaded by

Copyright:

Available Formats

Printing and Its Types

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Printing and Its Types

Uploaded by

Copyright:

Available Formats

PRINTING AND ITS TYPES

Dr. S.Grace Annapoorani and K.Saranya

Associate Professor and PhD Research Scholar

Department of textiles and apparel design

Bharathiar University, Coimbatore - India

Textile printing process

Applying coloured patterns and designs to decorate a

In this approach, the fabric is dyed in piece and then

The designs are carved on a wooden or metal block

It is done either with flat or cylindrical screens made of silk

Designs may be hand painted on fabric or the dye may be

It is a resist dyeing process. Designs are made with wax on a

JET SPRAY PRINTING

In this form of printing micro-sized droplets of dye are placed

You might also like