F T T H Sy stems

Furukawa Electric can configure high-quality, stable, flexible and efficient optical transmission systems
through its comprehensive offerings, from optical components to products and from products to systems. V-ONU for Broadcasting
1
Our broad product lineup offers optical video distribution and communication services
that ensure higher customer satisfaction.
Detached house F26S-OR-ZM3
Integral ONU for Broadcasting and Communication
FITELwave AX20

Center station

Closure with Built-in WDM Filter

FP-CC-W8

Residential reception system

Central Office（video distribution） This is a compact and lightweight V-ONU for FTTH terminals.
Optical video distribution system Item Specifications
Receiving optical element pin-PD
Transmission wavelength 1.3μm band or 1.55μm band
Digital Broadcasting Optical connector SC-SPC（standard）
Head-End System Receiving optical power −8∼−2dBm
Frequency band 70∼2,602MHz
High-Density WDM Filter Unit High-frequency mode1 Analog: 95dBμV; Digital: 85dBμV
FWM-301FH-WF-B0301Ax signal output power mode2 Analog: 89dBμV; Digital: 79dBμV
Ultra Broadband Optical Transmitter External Modulation Transmitter FWM-301FH-WF-B0302A This is an integral ONU for outdoor use Number of output connectors 1
FH-OT-26023C FH-OT-8601B that can accommodate Video ONU（V-ONU）and Power supply AC100V±10%
Power consumption 7W
data communication ONU（E-PON ONU）. Dimensions 104
（W）
×29.5
（D）
×60
（H）
mm（excluding projections）
Mass 0.3kg or less 

Coupler
Integral ONU for Broadcasting and Communication
Central Office
Detached house 2
FITELwave AX20
（data communication） V-ONU for Broadcasting
High-Power Multi-Port High-Power Multi-Port
F26S-OR-ZM3
Optical Amplifier（OA-BASE） Optical Amplifier（OA-PLUS） Communication system
FH-FA-21xx□ FH-FA-13xx□

E-PON Optical Line Terminal（3U Type）

FITELwaveAG 1600E

V-ONU for broadcasting and E -PON ONU for

communication have been integrated.
Residential reception system Item Specifications
Transmission medium 1.3μm zero-dispersion optical fiber
Optical connector SC/SPC

V-ONU section
INTERNET
Optical wavelength 1,550nm
Optical input power range −2∼−8dBm
Transmission frequency band 70∼770MHz
Max. transmission capacity Analog 11ch ＋ Digital 80ch
E-PON ONU for Communication RF output power 95dBμ
FITELwave AG20E
（L） Number of output terminals 1
Transmission medium 1.3μm zero-dispersion optical fiber

E-PON ONU section

Optical wavelength Downstream: 1,480∼1,500nm; Upstream: 1,260∼1,360nm
Allowable transmission loss 29dBm or more（including power penalty of 1dB or less）
Optical connector SC/SPC
LAN port 1 10M/100M/1000M, Auto-Negotiation/Fixed
LAN port 2 10M/100M, Auto-Negotiation/Fixed

Full support is provided for the Internet,

PoE-compatible terminal 1
（ＬＡＮ2）
Video distribution（RF）
PoE receiving input voltage DC＋48V
Optical fiber Temperature range −20∼40℃

video distribution and other attractive carrier services,

Common section
Humidity range 30∼80%（no dew condensation）
Data communication（Ethernet）
Radio wave regulation VCC classB-compliant

encompassing the Center facilities to optical terminals. Extraneous radiation

Dimensions
34dBμ/m or less
Main body: 205（W）×59.5（D）×207（H）mm/Power supply: 80（W）×59.5（D）×207（H）mm
Mass Main body: 1.5kg/Power supply: 0.5kg
 High-Power Multi-Port Optical Amplifier（OA-PLUS） High-Power Multi-Port Optical Amplifier（OA-BASE）
3 4
FH-FA-13xx□ FH-FA-21xx□

SNMP manageable multiple port optical amplifiers for FTTH

video distribution. Selectable are the port number（4, 8, 16 or
s. 32）and the optical output power（11.5, 13, 16 or 20dBm/port）.
High-power and multiple-port have been realized.
The product lineup includes ＋16/18/20dBm output. Item
Optical input power
Specifications
0∼10dBm（1,550∼1,560nm）
Number of output ports 4/8/16/32
Item Specifications
＋11.5dBm/port.
（Port number=4/8/16/32）
Wavelength 1,550∼1,560nm
＋13dBm/port.
（Port number=4/8/16/32）
Optical input power ＋10dBm（standard） Optical output power
＋16dBm/port.
（Port number=4/8/16/32）
Type A：＋16dBm/port ＋20dBm/port.
（Port number=4/8/16）
Optical output power Type B：＋18dBm/port Optical connector SC-APC（Angled PC）
Type C：＋20dBm/port Noise figure 5.5dB or less @Pin=0dBm, λ=1,550nm
Noise figure 6.0dB or less; when in combination with OA-BASE（OA-BASE input: 0dBm） Monitoring/control interface SNMP/WEB/TELNET/Dry contact
IN/FAIL Turned off when normal; red LED turns on when abnormal Power supply/power consumption AC100V/95W・185VA or less
（depending on models）
Monitoring and control interface SNMP/WEB/TELNET 1U: 481（W）x44（H）x400（D）mm（4 port products upto 13dBm/port.）
Power supply/power consumption AC100V or DC−48V/AC100V or less, DC550W or less（full implementation） 2U: 481（W）x88（H）x400（D）mm（4, 8 and 16 port products.）
Dimensions
Dimensions 483（W） ×399（D） ×221.5 （H） mm（excluding projections） 3U: 481（W）x132（H）x400（D）mm（32 port products.）
Mass 33kg or less（full implementation） * Depth（D）excludes protrutions.
Mass 1U: 9kg or less/ 2U: 13kg or less/ 3U: 14.5kg or less

n Optical Amplifier（pizza box type） Optical Switch

5 6
FH-FA-20xx□ FH-SW-210xL

SNMP manageable single port optical amplifiers for

or
video transmission, with 1U height compact chassissis The optical switch is optimum for redundant configuration
（19" rack mountable）. of optical transmission channel. It is also compatible with
SNMP, and automatic switching and forced switching
Item Specifications would also be possible at remote sub-central office.
Wavelength 1,550∼1,560nm
section
Input

Optical input power 0∼10dBm Item Specifications

Input optical connector SC-APC
（Angled PC） model FH-SW-2101L FH-SW-2102L
Optical fiber 1.31μm zero-dispersion, SMF 10/125μm Wavelength 1,530∼1,570nm 1,280∼1,340nm
Number of terminals 2 inputs（lines A and B） /1 output
section
Output

Optical connector SC-APC

（Angled PC）
Optical connector SC-APC（Angled PC）, SC-SPC #Can be designated at the time of ordering
Number of optical output 1
Input section

Max. input level ＋23dBm ＋16dBm

Optical output power FH-FA-2014A 13.0dBm, FH-FA-2015A 16.5dBm, FH-FA-2016A 19.0dBm, FH-FA-2017A 22.0dBm
Insertion loss 2dB or less 2.3dB or less
Noise figure 5.0dB or less
（@Pin=0dBm）
Isolation 50dB or more
Monitoring/control interface SNMP/WEB/TELNET/Dry contact
Automatic switching Setting is possible between Setting is possible between
Alarm Loss of input, Output deterioration, LD current, LD temperature, PU, FAN, etc. threshold level −10dBm and ＋17dBm −10dBm and ＋5dBm
Monitoring/control

Status monitor Optical input power, optical output power, LD current, LD temp., etc. Switching time 50ms or less
Control Enable/ disable pump LDs, etc. Operation line switching mode Auto: switches optical channel automatically or by remote control;
Control mode selection

IN, PU0, PU1, FAN, FAIL: Red LED turns on in case of alarm. selection（Auto/A-Fix/B-Fix） A-Fix/B-Fix: fixes optical channel for operation
LED LD : Green LED turns on in case that the pump LDs are enabled. Main line selection Remote: designates main line by remote control; A: operates line A as main
ACT: Green LED turns on in case that power is supplied properly. （Remote/A/B） line; B: operates line B as main line
Total alarm contact CRITICAL/MAJOR/MINOR Return mode selection Auto: returns automatically when the main line has recovered; Manual: does not
（Alarm contact outputs are made by assigning each alarm to CRITICAL, （Auto/Manual） return automatically even when the main line has recovered
output MAJOR or MINOR. The assignment configuration can be changed.） Power supply/power consumption AC100V or DC-48V/AC35VA or less DC15W or less
Power supply/ AC100V Dimensions 480 （W） ×397 （D） ×43.7 （H） mm （excluding projections）
m
power consumption 28W/56VA or less（13dBm）, 30W/60VA or less（16.5dBm）, 35W/70VA or less（19dBm）, 50W/100VA or less（22dBm） Mass Approx. 9kg
 Dimensions/Mass 483
（W）
×400
（D）
×43.7
（H）
mm（excluding projections）
/9kg or less
 Ultra Broadband Optical Transmitter（2.6GHz-compatible） DWDM External Modulation Optical Transmitter
7 8
FH-OT-26023C FH-OT-8601B

This is an optical transmitter for long-distance transmission of RF broadcast signals.

The transmitter sends CATV transmission signals between 70 Multiple-channel, long-distance transmission of video signals is possible in
and 770MHz, and BS and CS-IF signals between 950 and 2,602 combination with optical amplifiers. It is externally modulated, compatible
MHz by converting them into optical intensity modulated signals. with DWDM wavelength of ITU-G, and can be multiplexed in various ways.
Item Specifications The transmitter can also be made compatible with the L-band.
Transmission frequency band 70∼770MHz, 950∼2,602MHz
Input section

Item Specifications
Max. transmission （70∼770MHz） 11ch（analog）
, 80ch（digital）
channel （950∼2602MHz） 36ch
（BS・CS-IF） Transmission frequency band 70∼770MHz
RF input power 80dBμV
RF signal input （70∼770MHz） 76dBμV（analog）
, 66dBμV（digital）

Input section
level RF monitor level/connector −20dB over input power/F type
（950∼2602MHz） 76dBμV
（BS・CS-IF）
Optical output wavelength 1,550∼1,560nm, 1,570nm （ITU-grid）
Light-emitting element Laser diode
Output section

Optical output wavelength adjustable range ±100GHz（in steps of 50GHz）

Optical output wavelength 1,550nm band
Optical output power/optical output port ＋8.5dBm（standard） /2 ports
Optical connector SC-APC
（Angled PC）
SBS suppression Can be set between ＋13.0 to ＋19.0dBm（in steps of 0.5dB）
Optical output power/optical output port ＋9dBmW±1dB
RF return loss 15dB or more
CNR（Note 1） 46dB or more（70∼770MHz）, 26dB or more（950∼2,602MHz）
Performance

Relative intensity noise（RIN） −158dB/Hz or less（−160dB/Hz as standard）

Performance

CSO（Note 2） −56dB or less（77∼770MHz）

CNR（Note） 50.0dB or more
CTB（Note 2） −56dB or less（77∼770MHz）
CSO（Note） 65.0dB or more
IM3（Note 2） −59dB or less（950∼2,602MHz）
CTB（Note） 65.0dB or more
IM2（Note 2） −36dB or less（950∼2,602MHz）
Monitoring and control are possible with Ethernet
Others

Power consumption 50VA or less External control terminal

10/100 interface, Web browser software and SNMP
Dimensions 480
（W）
×401
（D）
×43.7
（H）
mm（excluding projections） Power supply/power consumption AC100V/80VA or less
Mass 3.4kg or less Dimensions 480（W）×464（D）×49（H）mm（JIS）, 483（W）×464（Ｄ）×44.5（H）mm（EIA）
（excluding projections）
Note 1: Performance when paired with the compamy's optical receiver（fiber length: 20km, optical reception level: -8dBmW） Mass 12kg or less
Note 2: Performance when paired with the compamy's optical receiver（fiber length: 20km, optical reception level: -2dBmW）
Note: Performance when paired with the company's optical receiver
（at optical input of 0dBm）

E-PON Optical Line Terminal（3U Type） E-PON ONU for Communication

9 10
FITELwave AG1600E FITELwave AG20E（ L）

This is a slimmer version of AG1600. The accommodation

efficiency improves by 60% .
FITELwave AG20E（L）is E-PON ONU that can offer
up to a 1Gpbs service to subscribers, when connected
Item Specifications
Transmission medium 1.3μm zero-dispersion optical fiber with the E-PON optical line terminal.
Optical wavelength Downstream: 1,480∼1,500nm; Upstream: 1,260∼1,360nm
Allowable optical transmission loss 29dB as a standard（including power penalty of 1dB） Item Specifications

Number of optical branches Up to 64 branches per PIF card Transmission medium 1.3μm zero-dispersion optical fiber
Power supply: 2 units Optical wavelength Downstream: 1,480∼1,500nm; Upstream: 1,260∼1,360nm
Fan: 2 units Allowable optical transmission loss 29dB as a standard（including power penalty of 1dB）
Configuration Structure Optical fiber surplus length storage section, AC adapter
SV: 1 unit
PIF: 16 units 10BASE-T/100BASE-TX/1000BASE-T
100BASE-TX/1000BASE-T LAN port 1 Auto-Negotiation/Fixed（full duplex/half duplex）
PON interface（PIF） Auto MDI/MDIX
Auto-Negotiation/Fixed（full duplex/half duplex）
Power supply AC100V∼240V 10BASE-T/100BASE-TX
Dimensions 480
（W）
×380
（D）
×130
（H）
mm（excluding projections） LAN port 2 Auto-Negotiation/Fixed（full duplex/half duplex）
Mass 20kg or less
（full implementation） Auto MDI/MDIX
Power supply AC100V, 10W or less
Dimensions 35
（W）
×158
（D）
×114
（H）
mm（excluding projections）
（tentative）
Mass Main body: 0.5kg or less, AC adaptor: 0.4kg or less
 Optical Distribution/WDM coupler Wide Wavelength Band Fiber
11 12
FWM Series AllWave/AWL ■Applications
Transmission loss and dispersion
●For subscriber networks
Low transmission loss is achieved in all Same dispersion ●Regional adoption of IT
wavelength bands as the OH peak has been removed characteristics as
conventional SMF
The fiber minimizes loss in the
1.2
O E S C L

Transmission loss (dB/km)

Dispersion (ps/nm･km)
Conventional 20
0.9 SMF
E-band wavelength region, and
AllWave Fiber
Coupler＆WDM Filter WDM Filter 0.6
10
can be used in all wavelength
0.3 0 bands from 1,280 to 1,625nm.
■Coupler ■WDM Filter AllWave Fiber

Item Specifications Item Specifications 0 -10

It is compatible with the
Model
2-port
FWM201-1x2xx
4-port
FWM201-1x4xx
8-port
FWM301-1x8xx
16-port
FWM301-1x16xx
Model
Transmission wavelength
FWM-301-FH-WF-B0301Ax FWM-301-FH-WF-B0302A
1,310/1,490/1,550nm
1300 1400 1500
Wavelength (nm)
1600
ITU-T G.652 standard of
single-mode optical f iber.
Applicable fiber SM fiber C-division output 1 output 2 output
Terminal connector
（Note） SC/APC 2.0dB or less 5.8dB or less C→D
（1,310nm） AllWave fiber has a wider
Applicable adapter SC with shutter/APC adapter（green） Insertion loss 2.2dB or less 6.0dB or less D→C
（1,490nm） wavelength band than the
The performance exceeds the
conventional SMF by Figure 1: AllWave "Zero Water Peak" Fiber --- Upward
Type 1×2（3 units） 1×4（2 units） 1×8（1 units） 1×16（1 units） 2.0dB or less 5.8dB or less V→C
（1,550nm） compatibility with conventional single-mode
100nm or more
Insertion loss 4.3dB or less 7.8dB or less 11.5dB or less 15.0dB or less 9dB or more C→V
（1,310nm） fiber (SMF), wider wavelength band
Unit occupation width when sub-rack-mounted
Number of units accommodated in sub-rack FH-MF-1102A
1 1
For 16 units（with 2-, 4- or 8-port coupler）
2 Isolation 7.5dB or more
11dB or more
C→V
（1,490nm）
C→D
（1,550nm）
ITU-T G.652.D standard of
low OH peak fibers.
Dimensions（EIA30 3U） 480
（Ｗ）
×271.5
（D）
×132
（H）
mm（excluding projections） Optical connector SC-APC（V, C port） SC-SPC（D port）
Mass ●●kg Dimensions 480（W）×342（D）×44（H）mm 480（W）×342（D）×88（H）mm （excluding projections）
Note: Compatibility with SPC connector is also available Mass ●●kg ●●kg
V port: video port; D port: communication port; C port: common（transmission channel）port

Closure with Built-in WDM Filter Exclusive Aerial Closure

13 14
FP-CC-W8 J398□

Model Fiber type Connections per tray Connected cores per tray Max. tray mounted Max. cores connected
Single core 12 12 10 120
Item Specifications Remarks 2-core ribbon 16 32 10 320
J398S
Transmission wavelength 1,310/1,490/1,550nm 4-core ribbon 10 40 10 400
12.4dB or less P2→P3
（1,310nm） 8-core ribbon 5 40 10 400

Insertion loss 12.4dB or less P3→P2

（1,490nm） Single core 6 6 10 60
J398T 2-core ribbon 8 16 10 160
12.4dB or less P3→P1
（1,550nm）
4-core ribbon 5 20 10 200（300 for through）
25dB or more P3→P1
（1,310nm）
Single core 50 50 1 50
Isolation 33dB or more P3→P1
（1,490nm）
J398A 2-core ribbon 50 100 1 100
9.5dB or more P3→P2
（1,550nm） 4-core ribbon 50 200 1 200
Dimensions 105（W）×70
（D）
×865
（H） mm * Max. number of cables fed in（one side）: 3 lines, or 2 lines * Dimensions:772（L） ×150 （W） ×193 （H） mm
Mass ●●kg ＋ 8 lines of drop cable, or 1 line ＋ 16 lines of drop cable * Mass: 5kg
* Applicable outer diameter of cables fed in: 8 to * Waterproofing properties: Waterproofing of grade 4,
P1 port: video port; P2 port: communication port; P3 port: common（transmission channel）port 24mm for trunk cables, 2.0mm width for drop cable JIS C 0920

Exclusive Aerial Closure Exclusive Closure for Drop Cable

15 16
J396□ J395L

Model Fiber type Connections per tray Connected cores per tray Max. tray mounted Max. cores connected Max. trays Drop cable Connections Connected Max. cores
Single core 12 12 2 24 mounted type per tray cores per tray connected
Single core 4 4 4
J398S 2-core ribbon 12 24 2 48 Basic kit（straight
1 base tray 2-core drop cable 4 8 8
4-core ribbon 12 48 2 96 connection）
4-core drop cable 4 16 16
12 12 2
Single core 44 Tray module 12 sheets when
20 20 Coupler case→1 Tray S Single core 1 1 12
M__S__（Note） only Tray S is used
J396B 8 16 2 （Optional）
2-core ribbon 64 Single core 2 2 12
J396S 16 32 Coupler case→1 （Trunk cable/ 6 sheets when
8 32 2 branch cable Tray M only Tray M is 2-core drop cable 2 4
24
4-core ribbon 104 connection） used 4-core drop cable 1 4
10 40 Coupler case→1
Note: Indicates combination of trays S and M; "M2S8" indicates two M trays and 8 S trays; two S trays and one
* Max. number of cables fed in（one side）: 2 lines 2.0mm width for drop cable
M tray are interchangeable.
＋ 6 lines of drop cable, or 1 line ＋ 12 lines of drop * Dimensions: 867（L） ×68 （W） ×117 （H） mm
cable * Mass: 3kg * Max. number of cables fed in（one side）: 2 lines of * Dimensions: 242（L） ×53 （W） ×140 （H） mm
* Applicable outer diameter of cables fed in: 9 to 22 * Waterproofing properties: Waterproofing of grade 4, trunk cable, 8 lines of branch cables * Mass: 1kg
mm for trunk cables, 9 to 17 mm for branch cables, JIS C 0920 * Applicable outer diameter of cables fed in: 3.3mm * Waterproofing properties: Waterproofing of grade 4,
width for trunk cables, 2mm width for branch cables JIS C 0920

The company names and product names appearing on the brochure are trademarks or registered trademarks of their respective owners.

http://www.furukawa.co.jp/broadband/english/
■Social System Sales Division, Telecommunications Company ■Information System Sales Division, Telecommunications Company
2-3, Marunouchi 2-chome, Chiyoda-ku, Tokyo, 100-8322（Marunouchi 1-29, Dojima-hama 2-chome. Kita-ku, Osaka-shi, Osaka Pref., 530-0004
Nakadori Building） （Furukawa Osaka Building）
JE-097 2J2 200
TEL.+81-3-3286-3973 FAX.+81-3-3286-3987 TEL.+81-6-6346-4074 FAX.+81-6-6346-4128
E-mail [email protected]