PassLeader JN0-102 Exam Dumps (151-200) PDF

New VCE and PDF Exam Dumps from PassLeader
➢ Vendor: Juniper
➢ Exam Code: JN0-102
➢ Exam Name: Juniper Networks Certified Associate - Junos (JNCIA-Junos)
➢ Questions 151 – Question 200
Visit PassLeader and Download Full Version JN0-102 Exam Dumps
QUESTION 151
Which statement is true regarding the Junos OS?
A. All platforms running the Junos OS separate the functions of learning and flooding.
B. All platforms running the Junos OS separate the functions of control and forwarding.
C. All platforms running the Junos OS separate the functions of routing and bridging.
D. All platforms running the Junos OS separate the functions of management and routing.
Answer: B
QUESTION 152
Which statement is true about the forwarding plane?
A. The forwarding plane is the intelligence of the platform.

B. The forwarding plane is based on an X86 architecture.
C. The forwarding plane maintains the routing tables, bridging table, and primary forwarding table.
D. The forwarding plane implements policers, stateless firewall filters, and class of service.
Answer: D
QUESTION 153
Which statement is true regarding the forwarding plane?
A. The forwarding plane is contained within the Routing Engine (RE).

B. The forwarding plane processes and evaluates exception traffic.
C. The forwarding plane contains the Packet Forwarding Engine (PFE).
D. The forwarding plane is not present on all platforms running the Junos OS.
Answer: C
QUESTION 154
Which statement is true about the forwarding plane?
A. It uses ASICs for increased performance.

B. It is the intelligence of the platform.
C. It maintains the routing tables.
D. It is based on an x86 architecture.
JN0-102 Exam Dumps JN0-102 Exam Questions JN0-102 PDF Dumps JN0-102 VCE Dumps
https://www.passleader.com/jn0-102.html
Answer: A
QUESTION 155
By default, which character indicates the configuration mode prompt?
A. #
B. >
C. $
D. %
Answer: A
QUESTION 156
By default, which character indicates the UNIX shell prompt?
A. #
B. >
C. $
D. %
Answer: D
QUESTION 157
How do you ping from configuration mode?
A. [edit interfaces]
user@router# run ping 1.1.1.1
B. [edit interfaces]
user@router# ping 1.1.1.1
C. [edit interfaces]
user@router# up ping 1.1.1.1
D. [edit interfaces]
user@router# exit ping 1.1.1.1
Answer: A
QUESTION 158
Which two commands will successfully create ping traffic? (Choose two.)
A. user@router# ping 10.10.10.1

B. user@router# run ping 10.10.10.1
C. user@router> ping 10.10.10.1
D. user@router> request ping 10.10.10.1
Answer: BC
QUESTION 159
Which command is used to display all output at once?
A. show interfaces | all

B. show interfaces | no-more
C. show interfaces | hold
D. show interfaces | display-all
Answer: B
QUESTION 160
Which CLI command is used to display output one page at a time?
A. user@router> show interfaces | no-more

B. user@router> show interfaces | trim
C. user@router> show interfaces
D. user@router> show interfaces | display
Answer: C
QUESTION 161
What information does the help reference command provide?
A. A brief description of commands and their default values

B. The serial number and version number of the device used to open a support case with JTAC
C. A list of all the active hardware alarms on the device
D. A display of the current configuration while in operational mode
Answer: A
QUESTION 162
Which command do you use to identify the meaning of a syslog message?
A. help log messages

B. man log messages
C. man syslog
D. help syslog
Answer: D
QUESTION 163
You want to log in to the router and make a configuration change. After logging in as the root user,
what is the next command you must enter?
A. enable
B. configure
C. edit
D. cli
Answer: D
QUESTION 164
You are configuring a new BGP neighbor and want to view the configuration of interface ge-0/0/0.42.
Which command do you use to achieve this result?
A. [edit protocols bgp group external]

user@router# set interfaces ge-0/0/0.42
B. [edit protocols bgp group external]
user@router# edit show interfaces ge-0/0/0.42
C. [edit protocols bgp group external]
user@router# top show interfaces ge-0/0/0.42
D. [edit protocols bgp group external]
user@router# show interfaces ge-0/0/0.42
Answer: C
QUESTION 165
You are at the top of the hierarchy and must configure OSPF on interface so-0/0/0 unit 100. Which
two achieve this result? (Choose two.)
A. set protocols
setospf area 0
set interface so-0/0/0.100
B. set protocols ospf area 0 interface so-0/0/0.100
C. edit protocols ospf interface so-0/0/0.100
D. edit protocols ospf area 0
set interface so-0/0/0.100
Answer: BD
QUESTION 166
Which CLI keyboard sequence allows you to move the cursor to the beginning of the line?
A. Ctrl+e
B. Ctrl+p
C. Ctrl+w
D. Ctrl+a
Answer: D
QUESTION 167
Which two statements apply when a user has entered private configuration mode by typing
configure private? (Choose two.)
A. All users have their own active configuration.

B. All users have their own private candidate configuration.
C. When a user commits, all nonconflicting changes made by all users are committed.
D. When a user commits, only the user's own changes are committed.
Answer: BD
QUESTION 168
Which two statements are true when using the configure exclusive CLI command? (Choose two.)
A. Multiple users can enter configuration mode and have their own private configuration.
B. When a user commits, only the user's changes are committed.
C. A message indicates which other users are in configuration mode and what portion of the configuration they are
editing.
D. Only a single user can edit the configuration.
Answer: BD
QUESTION 169
How do you save the current candidate configuration in the set format to permanent storage media?
A. [edit]
user@router# show | set | save /var/tmp/current.conf
B. [edit]
user@router# show | compare set | save /var/tmp/current.conf
C. [edit]
user@router# save /var/tmp/current.conf | display set
D. [edit]
user@router# show | display set | save /var/tmp/current.conf
Answer: D
QUESTION 170
You configured an interface with an IP address and committed the change. You then committed a
change that added an exception in a firewall filter to allow this network through the filter. You realize
that this work was done on the wrong router. How do you undo all these changes?
A. rollback 2
B. rollback 1
C. rollback 0
D. rollback 3
Answer: A
QUESTION 171
You have just issued the command user@router# save current.conf. Assuming the default settings,
where in the file system is current.conf saved?
A. /var/tmp/
B. /var/config/saved/
C. /var/home/user/
D. /config/
Answer: C
QUESTION 172
Using the command, user@router# load override latest.conf, where in the file system will the
latest.conf be located?
A. /var/home/user/
B. /var/config/saved/
C. /var/tmp/
D. /config/
Answer: A
QUESTION 173
What does the command show | compare rollback 1 display?
A. the difference between the current candidate configuration and the candidate configuration from one commit ago
B. the difference between the current active configuration and the current candidate configuration
C. the difference between the current active configuration and the active configuration from one commit ago
D. the difference between the current candidate configuration and the archived configuration from one commit ago
Answer: D
QUESTION 174
How do you write the current candidate configuration to the permanent storage media?
A. [edit]
user@router# save /var/tmp/current.conf
B. [edit]
user@router# write /var/tmp/current.conf
C. [edit]
user@router# commit /var/tmp/current.conf
D. [edit]
user@router# dump /var/tmp/current.conf
Answer: A
QUESTION 175
Which J-Web tab do you use to add licenses to the device?
A. "Configure"
B. "Troubleshoot"
C. "Monitor"
D. "Maintain"
Answer: D
QUESTION 176
Which three functions are available under the "Maintain" tab of J-Web? (Choose three.)
A. download and delete log files

B. view real-time statistics of interfaces
C. reboot the system
D. view and add licenses
E. edit security settings
Answer: ACD
QUESTION 177
Which command is used to enable access to J-Web using HTTPS?
A. set system remote-access profile https

B. set services remote-access profile j-web-https
C. set system services web-management https
D. set services web-management j-web-https
Answer: C
QUESTION 178
How can you verify that you have correctly configured SSH access to your Junos device?
A. user@router# show system services

B. user@router> show configuration services
C. user@router# show configuration system services
D. user@router# show system login
Answer: A
QUESTION 179
What must be configured prior to the first commit after factory defaults are loaded?
A. root authentication
B. default gateway
C. host name
D. management services
Answer: A
QUESTION 180
Which two statements are true about the rescue configuration file? (Choose two.)
A. It must include a root password.

B. It is rollback file number 50, and you can recover it by issuing rollback 50.
C. It is created by issuing request system configuration rescue save.
D. It is updated automatically when you commit.
Answer: AC
QUESTION 181
Which command will save the current active configuration as the rescue configuration?
A. user@router# save | rescue

B. user@router> request system configuration rescue save
C. user@router# save rescue configuration
D. user@router> file save rescue-configuration
Answer: B
QUESTION 182
Which command will delete the current rescue configuration?
A. user@router# system delete configuration rescue

B. user@router> request system configuration rescue delete
C. user@router# delete rescue configuration
D. user@router> file delete rescue-configuration
Answer: B
QUESTION 183
Which two statements are true about the primary address on an interface? (Choose two.)
A. It is the address used by default as the local address for broadcast and multicast packets sourced locally and sent
out of the interface.
B. You use the primary address when you have multiple IP addresses belonging to the same subnet on the same
interface.
C. It can be useful for selecting the local address used for packets sent out of unnumbered interfaces when multiple
non-127 addresses are configured on the loopback interface.
D. By default, the primary address on an interface is selected as the numerically highest local address configured on
the interface.
Answer: AC
QUESTION 184
What are three physical interface properties? (Choose three.)
A. payload scrambling
B. virtual circuit identifier
C. FCS
D. link speed
E. IP address
Answer: ACD
QUESTION 185
Which two commands may be used when configuring an IP address for a Gigabit Ethernet interface?
(Choose two.)
A. set interfaces ge-0/0/0.0 address 10.1.1.1/24

B. set interfaces ge-0/0/0.0 family inet address 10.1.1.1/24
C. set interfaces ge-0/0/0 unit 0 family inet address 10.1.1.1/24
D. set interfaces ge-0/0/0 address 10.1.1.1/24
Answer: BC
QUESTION 186
You accidentally configured interface so-0/0/0.0 with /32 instead of /30. Which two solutions could
you use to correct this configuration? (Choose two.)
A. [edit interfaces so-0/0/0.0]

user@router# replace family inetaddress /32 with /30
B. [edit interfaces so-0/0/0.0]
user@router# rename family inetaddress /32 to address /30
C. [edit]
user@router# replace interface so-0/0/0.0 family inetaddress /32 with address /30
D. [edit interfaces so-0/0/0.0]
user@router# delete family inet address
user@router# set family inetaddress /30
Answer: BD
QUESTION 187
Which three user authentication methods are supported by the Junos OS? (Choose three.)
A. RADIUS
B. CHAP
C. local user database
D. TACACS+
E. PAP
Answer: ACD
QUESTION 188
Which user authentication method is supported by the Junos OS as a last resort alternative?
A. TACACS+
B. RADIUS
C. local user database
D. enable password
Answer: C
QUESTION 189
Which two external authentication methods are supported by the Junos OS for user authentication?
(Choose two.)
A. RADIUS
B. KERBEROS
C. IPsec
D. TACACS+
Answer: AD
QUESTION 190
The authentication order configuration on your M120 includes the settings tacplus and radius (in
that order), but does not include the password parameter. You attempt to log in to the device, but
the network containing the authentication servers is currently down. Which statement is true about
your login attempt?
A. The login attempt is rejected.

B. The login attempt is automatically accepted after the authentication servers' timeout value is reached, since there
are no other authentication methods available.
C. The M120 automatically tries authenticating locally on the device after the authentication servers' timeout value is
reached.
D. The M120 automatically tries authenticating locally on the device before using external authentication.
Answer: C
QUESTION 191
You have been asked to configure a login class that will permit its users to view and edit the
configuration. The class should allow a user to view the entire configuration, but only to edit the
interfaces, routing-options, and protocols hierarchies. Which configuration accomplishes this login
class?
A. permissions [ view-configuration clear network view ];

allow-configuration "(interfaces) | (routing-options) | (policy-options) |
(protocols)";
B. permissions [ view-configuration clear network view ];
allow-commands "(configure)";
C. permissions [ view-configuration clear network view ];
allow-configuration "(interfaces) | (routing-options) | (protocols)";
D. permissions [ clear network view ];
allow-configuration "(interfaces) | (routing-options) | (protocols)";
Answer: C
QUESTION 192
Which two login-class permissions could permit a user to view the system hierarchy of the active
configuration? (Choose two.)
A. system permission
B. view-configuration permission
C. network permission
D. super-user permission
Answer: AB
QUESTION 193
Which login class permission will allow a user to use the telnet utility?
A. network permission
B. maintenance permission
C. supervisor permission
D. shell permission
Answer: A
QUESTION 194
Which two statements are true regarding trace options on Junos devices? (Choose two.)
A. You can see the contents of the log file by entering the show log <filename> command.
B. Trace options will send information to your screen automatically.
C. Trace options are limited to one protocol at a time.
D. The file name and a set of flags may be specified when enabling traceoptions.
Answer: AD
QUESTION 195
Which directory does the Junos OS use to store syslog information by default?
A. /var/messages
B. /var/syslog
C. /var/tmp
D. /var/log
Answer: D
QUESTION 196
Which statement is true regarding syslog on Junos devices?
A. No logging is enabled by default.

B. By default, the information is stored in a file named events.
C. Only the message severity level must be configured.
D. You can configure the router to send log messages to the console.
Answer: D
QUESTION 197
What is the default SNMP permission level on Junos devices?
A. read
B. read-write
C. read-only
D. write
Answer: C
QUESTION 198
Which operational mode command can be used to synchronize the local system time with an NTP
server?
A. set ntp time 64.32.129.3

B. set clock ntp 64.32.129.3
C. set time 64.32.129.3
D. set date ntp 64.32.129.3
Answer: D
QUESTION 199
When configuring more than one archival site, which statement is true?
A. The system will first attempt the transfer using the URL configured last.
B. The system will transfer the configuration to each archival site.
C. The system will not transfer to a secondary site unless the previous site fails.
D. The system will transfer using secure copy protocol (SCP) before attempting FTP.
Answer: C
QUESTION 200
When considering the default behavior of Junos platforms, which statement is true about archiving
configurations?
A. A system log message is generated, confirming the transfer attempt.

B. The destination filename format can be altered by configuration.
C. The frequency the system archives the configuration cannot be changed.
D. An archive log is created to track transfer attempts, both failed and successful.
Answer: A
Visit PassLeader and Download Full Version JN0-102 Exam Dumps

PassLeader JN0-102 Exam Dumps (151-200) PDF

Uploaded by

Copyright:

Available Formats

PassLeader JN0-102 Exam Dumps (151-200) PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

PassLeader JN0-102 Exam Dumps (151-200) PDF

Uploaded by

Copyright:

Available Formats

New VCE and PDF Exam Dumps from PassLeader

➢ Exam Code: JN0-102

➢ Exam Name: Juniper Networks Certified Associate - Junos (JNCIA-Junos)

➢ Questions 151 – Question 200

Visit PassLeader and Download Full Version JN0-102 Exam Dumps

A. The forwarding plane is the intelligence of the platform.

A. The forwarding plane is contained within the Routing Engine (RE).

A. It uses ASICs for increased performance.

A. user@router# ping 10.10.10.1

A. show interfaces | all

A. user@router> show interfaces | no-more

A. A brief description of commands and their default values

A. help log messages

A. [edit protocols bgp group external]

A. All users have their own active configuration.

A. download and delete log files

A. set system remote-access profile https

A. user@router# show system services

A. It must include a root password.

A. user@router# save | rescue

A. user@router# system delete configuration rescue

A. set interfaces ge-0/0/0.0 address 10.1.1.1/24

A. [edit interfaces so-0/0/0.0]

A. The login attempt is rejected.

A. permissions [ view-configuration clear network view ];

A. No logging is enabled by default.

A. set ntp time 64.32.129.3

A. A system log message is generated, confirming the transfer attempt.

Visit PassLeader and Download Full Version JN0-102 Exam Dumps

You might also like