Scribd Logo
Upload

Welcome to Scribd!

  • 87 views

    Optical Wireless Audio Communication System Using Infrared Light (BLACK)

    Uploaded by

    vivek kumar
    This document summarizes an optical wireless audio communication system that uses infrared light. It discusses the history of optical signaling, the system components including the transmitter and receiver units, and how the system works by converting audio signals to infrared light and back. The system can communicate within 16 meters and has a 94% reliability rate. Potential applications include use in museums, airplanes, and intercom systems. The conclusion recommends using a laser diode transmitter and interfacing with RF technology to improve the system.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Optical Wireless Audio Communication System Using Infrared Light (BLACK)

    Uploaded by

    vivek kumar
    87 views17 pages
    This document summarizes an optical wireless audio communication system that uses infrared light. It discusses the history of optical signaling, the system components including the transmitter and receiver units, and how the system works by converting audio signals to infrared light and back. The system can communicate within 16 meters and has a 94% reliability rate. Potential applications include use in museums, airplanes, and intercom systems. The conclusion recommends using a laser diode transmitter and interfacing with RF technology to improve the system.

    Original Description:

    seminar report

    Original Title

    Optical Wireless Audio Communication System using Infrared Light [BLACK]

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes an optical wireless audio communication system that uses infrared light. It discusses the history of optical signaling, the system components including the transmitter and receiver units, and how the system works by converting audio signals to infrared light and back. The system can communicate within 16 meters and has a 94% reliability rate. Potential applications include use in museums, airplanes, and intercom systems. The conclusion recommends using a laser diode transmitter and interfacing with RF technology to improve the system.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    87 views17 pages

    Optical Wireless Audio Communication System Using Infrared Light (BLACK)

    Uploaded by

    vivek kumar
    This document summarizes an optical wireless audio communication system that uses infrared light. It discusses the history of optical signaling, the system components including the transmitter and receiver units, and how the system works by converting audio signals to infrared light and back. The system can communicate within 16 meters and has a 94% reliability rate. Potential applications include use in museums, airplanes, and intercom systems. The conclusion recommends using a laser diode transmitter and interfacing with RF technology to improve the system.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 17

    A SEMINAR REPORT ON

    OPTICAL WIRELESS AUDIO


    COMMUNICATION SYSTEM USING
    INFRARED LIGHT

    Guided By: Submitted By:


    Er. Julie Devi Pallavee Maurya
    CONTENT
    • Introduction
    • History
    • Technologies for the Design
    • Advantages
    • Disadvantages
    • Components Used
    • Transmitter Unit
    • Receiver Unit
    • System Specification
    • Operation
    • Application
    • Conclusion
    • Recommendation
    • References
    INTRODUCTION
    • An audio optical wireless communication system
    communicates using optical (light) energy as the
    transmission medium.
    • It can communicate within a short range of about
    15-20 meters.
    HISTORY
    • Claude Chappe invented semaphore visual
    telegraph, an optical signaling system.
    • In 1904, the heliograph telegraphy transmitters
    were used by the German.
    • Optical Morse transmitters “Blinkgerät” which
    made use of red filters was used in World War I.
    TECHNOLOGIES FOR THE DESIGN

     Radio Frequency (RF) Wireless Audio


    Communication System

     Bluetooth Wireless Audio Communication System

     Optical Wireless Audio Communication System


    ADVANTAGES
    • They have a low cost.
    • They consume less power.
    • They are simple and easier to use.
    • They have a long lifespan.
    DISADVANTAGES
    • The system require line of sight (LOS) for
    communication.
    • This can work within a close range of about 7-10
    meters.
    • The efficiency of the system is low.
    • They have a low transmission speed.
    • They are easily affected by noise.
    • They can’t communicate when obstacles are
    placed at their transmission path.
    COMPONENTS USED
    • Resistor
    • Bridge Rectifier Diode
    • LED
    • Switch
    • TDA7240A Audio Amplifier IC
    • Capacitor
    • Loud Speaker
    • Audio Jack
    • Step Down Transformer
    • Voltage Regulator
    • Photo Detector
    TRANSMITTER UNIT
    RECEIVER UNIT
    SYSTEM SPECIFICATION
    • Transmitter
     Input Voltage: 220/240V (50/60HZ) AC
     Output Voltage: 12V DC
     Output Current: 300mA
    • Receiver
     Input Voltage: 220/240V (50/60HZ) AC
     Output Voltage: 12V DC
     Power Output: 20W
    OPERATION
    • Audio signal gets to the transmitter unit through the audio jack.
    • The audio signal is fed to an audio amplifier which amplifies the audio
    signal.
    • The amplified audio signal is then sent to the infrared transmitter which
    converts the amplified audio signal into optical (light) energy.
    • The radiated light energy from the transmitter is detected by the photodiode
    at the receiver which converts the detected light from optical (light) energy to
    an electrical energy.
    • The converted electrical energy is sent to an amplifier which amplifies the
    electrical signal.
    • The amplified electrical signal is then fed to a loudspeaker which converts
    the electrical signal to an audio signal.
    APPLICATION
    Wireless communication in:
    • Museum
    • Airplane, Aircrafts
    • Intercom
    • TV sound system
    • Closed Circuit Cameras
    CONCLUSION
    This paper looks at how to design and construct an efficient, portable, cost
    effective and low power optical wireless audio communication system. This
    system was constructed making use of two infrared transmitters and four
    infrared receivers. This was done with the aim of improving the efficiency of
    the system as if any of the infrared transmitters or receivers are not in
    proper line of sight alignment, the other transmitter/receiver would be in
    proper line of sight alignment thereby ensuring the reception of the
    transmitted audio signal. When tested, IT performed well within a
    maximum communication range (distance between the transmitter and
    receiver) of 16 meters with a reliability of 94 percent. Hence the system
    could be said to be reliable.
    RECOMMENDATION
    • The laser diode should be used as the transmitter.
    • Many transmitters and receivers can be connected in
    parallel to improve efficiency.
    • It should be interfaced with RF technology to reduce
    the limitations like line of sight (LOS).
    REFERENCES
    • Mohamad, N. R.; Wakiran, A. A.; Iswandi, M. F.; Salleh, Yunus, S. A. M. J.;
    Sallehuddin, F.; Azmin, N. F. and Chachuli S. A. M. (2013). Development of Optical
    Wireless Audio System using Infrared Light Communications, IOSR journal of Electronics
    and Communication Engineering, 8(6):65-69.
    • Hranilovic, S. (2005). Wireless Optical Communication Systems. Springer Science +
    Business Media, Inc, Boston.
    • Electronic Design (2012). Building Simple Wireless Bluetooth Stereo Audio Outdoor
    System.www.electronicdesign.com/communications/build-simple-wirelessbluetooth-
    stereo-audio-system-outdoors. Accessed on December 12, 2017.
    THANK YOU

    You might also like