Scribd Logo
Upload

Welcome to Scribd!

  • 84 views

    MQ SP M 4039

    Uploaded by

    jaseel k
    This document provides specifications for coating selection and application for industrial plants and equipment. It combines two Process Industry Practices documents on coating system selection criteria and external coating application. It specifies coating systems for substrates in a severe marine environment, and includes additions and revisions to the industry standards for coating inspection reports and preparation of surfaces like stainless steel for coating.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    MQ SP M 4039

    Uploaded by

    jaseel k
    84 views6 pages
    This document provides specifications for coating selection and application for industrial plants and equipment. It combines two Process Industry Practices documents on coating system selection criteria and external coating application. It specifies coating systems for substrates in a severe marine environment, and includes additions and revisions to the industry standards for coating inspection reports and preparation of surfaces like stainless steel for coating.

    Original Title

    MQ-SP-M-4039

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for coating selection and application for industrial plants and equipment. It combines two Process Industry Practices documents on coating system selection criteria and external coating application. It specifies coating systems for substrates in a severe marine environment, and includes additions and revisions to the industry standards for coating inspection reports and preparation of surfaces like stainless steel for coating.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    84 views6 pages

    MQ SP M 4039

    Uploaded by

    jaseel k
    This document provides specifications for coating selection and application for industrial plants and equipment. It combines two Process Industry Practices documents on coating system selection criteria and external coating application. It specifies coating systems for substrates in a severe marine environment, and includes additions and revisions to the industry standards for coating inspection reports and preparation of surfaces like stainless steel for coating.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 6

    Power and Water Utility Company for Jubail and Yanbu (MARAFIQ) Master Specification MQ-SP-M-4039

    Project Name: MARAFIC SPEC DEVELOPMENT Date: 14 Apr 2011


    Contract Number: A5MU Page 1 of 6
    Revision 1

    COATING SELECTION & APPLICATION REQUIREMENTS


    FOR INDUSTRIAL PLANTS & EQUIPMENT

    This specification has been revised as indicated below and described in the revision record on the following
    page. Please destroy all previous revisions.

    Revision Date Originator's Reviewed/Checked By Pages


    No. Name & Initials Name & Initials
    A 17-Mar-11 K. Rachel T. Wood All
    0 17-Mar-11 K. Rachel T. Wood All
    1 14-April-11 K. Rachel T. Wood All

    APPROVALS SIGNATURES DATE

    Lead Engineer
    Engineering Manager:
    Client Approval:

    ISSUED FOR : Construction X Other Issued Approved


    Power and Water Utility Company for Jubail and Yanbu (MARAFIQ) Master Specification MQ-SP-M-4039
    Project Name: MARAFIC SPEC DEVELOPMENT Date: 14 Apr 2011
    Contract Number: A5MU Page 2 of 6
    Revision 1

    COATING SELECTION & APPLICATION REQUIREMENTS


    FOR INDUSTRIAL PLANTS & EQUIPMENT

    Record of Revisions
    Revision Date Description
    No.

    A 17-Mar-11 Issued for Client Review

    0 17-Mar-11 Issued for Client Review

    1 14-April-11 Issued Approved


    Power and Water Utility Company for Jubail and Yanbu (MARAFIQ) Master Specification MQ-SP-M-4039
    Project Name: MARAFIC SPEC DEVELOPMENT Date: 14 Apr 2011
    Contract Number: A5MU Page 3 of 6
    Revision 1

    COATING SELECTION & APPLICATION REQUIREMENTS


    FOR INDUSTRIAL PLANTS & EQUIPMENT

    1.0 GENERAL .....................................................................................................................................................4

    2.0 PIP CTCE1000, EXTERNAL COATING SYSTEM SELECTION CRITERIA ....................................4

    3.0 PIP CTSE1000, APPLICATION OF EXTERNAL COATINGS..............................................................4

    4.0 ADDITIONS & REVISIONS TO PIP CTCE1000 .....................................................................................5

    5.0 ADDITIONS & REVISIONS TO PIP CTSE1000......................................................................................5

    6.0 ATTACHMENTS..........................................................................................................................................6
    Power and Water Utility Company for Jubail and Yanbu (MARAFIQ) Master Specification MQ-SP-M-4039
    Project Name: MARAFIC SPEC DEVELOPMENT Date: 14 Apr 2011
    Contract Number: A5MU Page 4 of 6
    Revision 1

    COATING SELECTION & APPLICATION REQUIREMENTS


    FOR INDUSTRIAL PLANTS & EQUIPMENT

    1.0 GENERAL

    1.1 Scope

    This specification combines two Process Industry Practices (PIP) to address Selection &
    Application Criteria for external coatings for aboveground plant facilities exposed to
    weather and operating at temperatures less than 1000°F (538°). These two documents are
    provided in support of Specification MQ-SP-M-4038, Painting.

    1.2 Exceptions

    This Specification is not applicable to architectural components and buildings.

    2.0 PIP CTCE1000, External Coating System Selection Criteria

    This document provides requirements for the selection of industrial coating systems,
    identifies various industry standards and codes and defines the various environments that
    influence the selection of coating systems.

    CTCE1000-D1, Documentation Requirements, identifies the documents required for


    selection of external coating systems.

    CTCE1000-D2, Type Code Definitions, provides the generic coating descriptions for the
    coating type codes listed in the Selection Criteria Sheet CTCE1000-D22.

    CTCE1000-D22, Selection Criteria Sheet, identifies the various substrates, operating


    temperatures and coating systems that are appropriate for a severe/seacoast environment.

    3.0 PIP CTSE1000, Application of External Coatings

    This document provides requirements for the application of industrial external coatings
    and includes industry codes and standards, general guidelines on surfaces not requiring
    coating, general surface preparation and application guidance, etc.

    CTSE1000-D1 identifies Documentation Requirements for the application of external


    coatings, including the specific coating systems as specified in Project Painting
    Specification MQ-SP-M-4038.

    CTSE1000-F provides a Daily Inspection Report form for the application of external
    coatings.
    Power and Water Utility Company for Jubail and Yanbu (MARAFIQ) Master Specification MQ-SP-M-4039
    Project Name: MARAFIC SPEC DEVELOPMENT Date: 14 Apr 2011
    Contract Number: A5MU Page 5 of 6
    Revision 1

    COATING SELECTION & APPLICATION REQUIREMENTS


    FOR INDUSTRIAL PLANTS & EQUIPMENT

    External Coating System Sheets provide the basic information required for the
    application of each specific coating system required in Painting Specification MQ-SP-M-
    4038.

     CTSE1000-D104

     CTSE1000-D110

     CTSE1000-D114

     CTSE1000-D120

     CTSE1000-D124

     CTSE1000-D128

     CTSE1000-D129

     CTSE1000-D129

     CTSE1000-D130

     CTSE1000-D131

    4.0 ADDITIONS & REVISIONS TO PIP CTCE1000

    No additions or revisions.

    5.0 ADDITIONS & REVISIONS TO PIP CTSE1000

    Add to section 2.1, Industry Codes and Standards:

    - SSPC-SP 16 Brush-Off Blast Cleaning of Coated and Uncoated Galvanized Steel, Stainless
    Steels, and Non-Ferrous Metals

    Add to section 4.2.1.1 Surfaces not to be Coated:

    g. Uninsulated stainless steel and alloys operating at 140°F (60°C) and above
    Power and Water Utility Company for Jubail and Yanbu (MARAFIQ) Master Specification MQ-SP-M-4039
    Project Name: MARAFIC SPEC DEVELOPMENT Date: 14 Apr 2011
    Contract Number: A5MU Page 6 of 6
    Revision 1

    COATING SELECTION & APPLICATION REQUIREMENTS


    FOR INDUSTRIAL PLANTS & EQUIPMENT

    Add to section 4.2.1.2:

    j. Uninsulated stainless steel and alloys operating at 140°F (60°C) and below

    Add to section 4.3.1 Preparation for Blasting:

    4.3.1.6 Compressed air used for abrasive blasting shall be tested in accordance with ASTM
    D4285 at the beginning of each shift, every four hours thereafter and after any
    interruption of compressor operation.

    4.3.1.7 Surfaces to be abrasive blasted shall be tested for soluble salt contamination in
    accordance with section 5.0 of Painting Specification MQ-SP-M-4038.

    6.0 ATTACHMENTS

    You might also like