Scribd Logo
Upload

Welcome to Scribd!

  • 72 views

    Anti Stripping Agent

    Uploaded by

    diana aznan
    This document specifies materials and workmanship requirements for roadworks on the Mass Rapid Transit Line 2 project from Sungai Buloh to Serdang to Putrajaya. It discusses the use of ordinary Portland cement as an adhesion and anti-stripping agent when added to asphalt concrete at 2% by weight. It also requires contractors to perform bitumen stripping tests to demonstrate the aggregates will adhere satisfactorily to the bitumen during use, and allows alternative anti-stripping agents if needed. Any aggregates that fail these tests cannot be used in the asphalt concrete.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Anti Stripping Agent

    Uploaded by

    diana aznan
    72 views1 page
    This document specifies materials and workmanship requirements for roadworks on the Mass Rapid Transit Line 2 project from Sungai Buloh to Serdang to Putrajaya. It discusses the use of ordinary Portland cement as an adhesion and anti-stripping agent when added to asphalt concrete at 2% by weight. It also requires contractors to perform bitumen stripping tests to demonstrate the aggregates will adhere satisfactorily to the bitumen during use, and allows alternative anti-stripping agents if needed. Any aggregates that fail these tests cannot be used in the asphalt concrete.

    Original Description:

    description for anti stripping agent test

    Original Title

    Anti Stripping agent

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document specifies materials and workmanship requirements for roadworks on the Mass Rapid Transit Line 2 project from Sungai Buloh to Serdang to Putrajaya. It discusses the use of ordinary Portland cement as an adhesion and anti-stripping agent when added to asphalt concrete at 2% by weight. It also requires contractors to perform bitumen stripping tests to demonstrate the aggregates will adhere satisfactorily to the bitumen during use, and allows alternative anti-stripping agents if needed. Any aggregates that fail these tests cannot be used in the asphalt concrete.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    72 views1 page

    Anti Stripping Agent

    Uploaded by

    diana aznan
    This document specifies materials and workmanship requirements for roadworks on the Mass Rapid Transit Line 2 project from Sungai Buloh to Serdang to Putrajaya. It discusses the use of ordinary Portland cement as an adhesion and anti-stripping agent when added to asphalt concrete at 2% by weight. It also requires contractors to perform bitumen stripping tests to demonstrate the aggregates will adhere satisfactorily to the bitumen during use, and allows alternative anti-stripping agents if needed. Any aggregates that fail these tests cannot be used in the asphalt concrete.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    PROJEK MASS RAPID TRANSIT LALUAN 2: Materials and Workmanship Specification

    Jajaran Sungai Buloh - Serdang - Putrajaya Section 300 - Roadworks

    d) Anti-Stripping Agent
    Ordinary Portland cement shall be added to the combined
    aggregate for asphaltic concrete to serve as an adhesion and
    anti-stripping agent. The amount of cement added for this
    purpose shall be 2% by weight of the combined aggregate.
    (Additional cement may also be added, if necessary, to serve as
    filler.)

    Ordinary Portland cement for this purpose shall conform to the


    requirements of MS 522 and shall be dry, free flowing and free
    from agglomerations at the time of use.

    Notwithstanding the use of ordinary Portland cement as an


    anti-stripping agent as specified above, the Contractor shall be
    responsible for ensuring that the bitumen binder adheres
    satisfactorily to the aggregate and does not strip from it during
    the service life of the asphaltic concrete.

    Accordingly, the Contractor shall carry out bitumen stripping


    tests with the proposed aggregates to demonstrate to the

    aggregates will perform satisfactorily in service with the


    specified bitumen binder. Such tests shall be carried out in
    accordance with AASHTO Test Method T 182 (withdrawn), or

    direct or approve, such as AASHTO T 283. When AASHTO Test


    Method T 182 is used, the coated area at the end of the

    95%.

    ordinary Portland cement does not perform satisfactorily as an


    anti-stripping agent, the Contractor may propose to use
    another adhesion and anti-stripping agent in addition to, or
    wholly or partially instead of, the ordinary Portland cement
    specified above. Such agent shall be of a type approved by the
    xed with
    the bituminous binder, all in accordance with the

    added to the bitumen binder used in the bitumen stripping tests


    in the appropriate amount and manner.

    Aggregate which does not perform satisfactorily in the bitumen


    stripping tests, using the approved adhesion and anti-stripping
    agent when appropriate, shall not be used in asphaltic concrete.

    SSP-MRTC-GENE-OVPR-SPC-03300 Page 30 of 56 Revision: 00

    You might also like