EDCR Manual PDF

User Manual - Version 1.
5
Of
Automation of Development Control Regulations and
Plan Scrutiny System
For
Department of Town & Country Planning
Government of Tamilnadu
“eDCR” SOFTWARE DEVELOPED

By
R.SIVA (Architect & CEO) and Team
Vinzas Solutions India Private Limited
W-23, Third Main Road, Second Street, Anna Nagar,
Chennai – 600 040
www.vinzassolutions.com
Helpdesk: (Timing: 10:30 Am to 5:30 Pm) – Monday to Friday – Phone: 044-2620 0688
DTCP-Vinzas-eDCR-User Manual Version_1.5
TABLE OF CONTENTS
S. No. Description Page
1. INTRODUCTION 2
2. PROMINENT PROCESS OF THE SOFTWARE 3
2.1 ONLINE BUILDING PLAN APPLICATION SCRUTINY PROCESS 3
2.2 PRECHECK SOFTWARE 3
2.3 “eDCR” SCRUTINY PROCESS 4
3. OBJECTIVES 4
4. SCOPE OF THE SYSTEM 4
5. DRAWING FILES SPECIFICATIONS 5
5.1 LAYERS (LAYER NAMES) TO BE FOLLOWED 5
5.2 THE DRAWING SHOULD HAVE THE FOLLOWING SPECIFICATIONS 5
6. PROCEDURE TO CREATE A DRAWING 6
6.1 PARAMETERS TO BE DRAWN USING LINE OBJECTS 6
6.2 PARAMETERS TO BE DRAWN USING POLYLINE OBJECTS 7
6.3 PARAMETERS TO BE DRAWN USING TEXT OBJECTS 8
7. DETAILS OF COLOUR CODE FORMAT 9
8 FSI PARAMETERS FOR INCIDENTAL STRUCTURES 27
9. NON FSI PARAMETERS 28
10. NON FSI TEXT 28
11. COMMERCIAL BUILDING USE TEXT ORDERED AS PER CATEGORY 28
12. HOW TO SUBMIT THE DRAWING 31
12.1 REGISTRATION PROCESS 31
12.2 LOGIN PROCESS 32
12.3 PLAN SUBMISSION PROCESS 33
12.4 REFERENCE NUMBER DETAILS 41
13. ANNEXURE PARAMETERS SNAPSHOT 42
Page 1 of 110
1.0 INTRODUCTION
The Directorate of Town and Country Planning functions as per the Town and Country
Planning Act, 1971. This act covers the entire state and provides the preparation of Regional
Plan, Master Plan and Detailed Development Plan, and the constitution of Regional Planning
Authorities, SLPAs, CLPAs and NTDAs. There is a provision for the constitution of State Town
and Country Planning Board. The Director of Town and Country Planning is the Head of the
Directorate. The HO is located at Chennai, with 14 Regional Deputy Directors (RDD), 27
Composite Local Planning Authorities (CLPA) and 8 New Town Development Authorities
(NTDA) under its control.
DTCP does the plan approval adhering to Development Regulations (DR). The scrutiny has
two parts namely 1. Document Scrutiny 2. Plan Scrutiny. Apart from that validation of documents,
verification of the site, land use classification, building plan parameters, Parking, Reservations and
various No Objection Certificates are to be produced wherever necessary are being done.
All the feasible parameters in the drawing are verified against specifications in DR like land
use, Building Activity and various types of Building parameters such as Special Building, Multi-storied
Building, Industries & Institutional Buildings etc.
The following are the core activities of the DTCP, however current scope is to facilitate
Building plan Application Scrutiny only.
1. Land Planning
2. Technical approval for Layout plan
3. Building Plan Application Scrutiny
4. Change of land use approval
DTCP facilitates the building plan application scrutiny through full fledged software named
which is developed by its Consultant, Vinza Solutions Chennai.
Page 2 of 110
The Online Building Plan Scrutiny Module in helps the Architect/Licensed Builders to
submit the Drawing in .dwg Format and get the Scrutiny Result and also the Applicant can view the
status of the drawing online. The LPA Officer sends the result through e-mail.
The Scrutiny Module in "eDCR" helps the LPA Officers to complete the scrutiny process as
per DR Norms of DTCP.
The “eDCR” technically scrutinize all the categories viz. Special Buildings, Multi-Storied
Buildings and Group Developments.
2.0 PROMINENT PROCESS OF THE SOFTWARE
2.1 ONLINE BUILDING PLAN APPLICATION SCRUTINY PROCESS
Automation of Online Building Plan Application Scrutiny (OBPAS) is the main part of the
which is used by Architect/Licensed Builders and the LPA officers.
 System is designed for Architect/Licensed Builders to register and submit the drawing
and get the Reference Number of the Application.
 The drawing will get processed, i.e. Scrutiny online and the reports will be generated
by the Software, without any Human intervention.
 The Authorized LPA officer will download the Reports.
 The software will facilitate communication between Architect/Licensed Builders and
LPA Officer via E-Mail, Public can also view the status of their File Online.
 The system also contains a relational database having list of Architect/Licensed
Building Surveyors, LPA officer’s details.
 The applicant can also get the scrutiny report through online (OBPAS) using their
Reference Number.
2.2 PRECHECK SOFTWARE
Precheck is the software given for finding out all the polyline, line, and text related problems in
the drawing. When the Applicant submits the building map proposal, this software enables the
applicant to rectify the defects in the drawing and make it suitable to run in the Scrutiny software. It
reads the drawing elements and lists all the discrepancies in the drawing. It will process the file and
gives the output with various parameters as listed below. If errors are found in the drawing, the
drawing will be populated with hyperlinks to the errors and will be returned to the Applicant via
dashboard.
Page 3 of 110
1. Setback Boundary
2. Multiple Polyline Geometry Problems
3. Invalid object colour
4. Misplaced OTS
5. Existence of Blocks, Regions, Wipeouts & External references in Floor layers
6. Mandatory requirements and
7. Other critical errors
The disqualified items will be marked and a reference will be placed as text in the Return
drawing. Details will be displayed such as disqualified object name; floor name and drawing
coordinate position. It will also draw a crossed grey line on all the disqualified objects throughout the
drawing. The disqualified object can be viewed on holding the “Ctrl” key and selecting the coordinate
position of the hyper-linked text (error text) in the drawing.
2.3 "eDCR" SCRUTINY PROCESS
In this process the Applicant submits the drawing. There are two stages of drawing scrutiny.
In the first stage, basic checker software runs, which checks, if the drawing meets the basic standards
like correctness of polylines, text and lines, Scrutiny software processes the drawing and generates
Scrutiny report.
If the drawing is not as per the standards defined in this User Manual, the drawing will be
marked as ‘returned’ with the errors written as text in the drawing itself. The drawing can be
downloaded and the errors can be corrected by the Applicant and then re-uploaded.
3.0 OBJECTIVES
To bring transformation in the plan scrutiny processing system with speed, accuracy,
consistency and transparency in the entire scrutiny process. To achieve the goal, it is proposed to
automate the planning scrutiny process by customization with the help of technically competitive
software.
4.0 SCOPE OF THE SYSTEM
 The Automation helps to increase the Productivity and Accuracy of the Drawing Result.
 Speed up the Scrutiny process.
 Easier Public Interaction with Online System.
 Reduce the Time consumption and Manual Errors of Scrutiny Process.
 Savings on the infrastructure required to store paper drawings.
 Easy to retrieve data since the data is stored in digital format.
Page 4 of 110
5.0 DRAWING FILE SPECIFICATIONS
Preparations of computerized plans under has the following steps, which are to be
followed compulsory. Otherwise the software will not process the given drawing.
5.1 LAYERS (LAYER NAMES) TO BE FOLLOWED
 Floor layer – Floor01, Floor02, etc…. corresponding to the floor count.
 Floor-Stilt or Floor-Ground for common details like stair details, Road width etc.
 For Stilt Floor, layer should be Floor-Stilt.
 For Basement floor, layer should be Floor-BF1, Floor–BF2 etc. Corresponding to the
Basement Floor Count.
 For multi level parking, layer should be Floor-MP1, Floor-MP2 etc.

Corresponding to the Multi-level parking count.
 Don’t use unnecessary spaces in the layer creation.
Example: Do’s - Floor01, Floor-BF1 etc….

Don’ts – Floor 01, Floor - BF 1 etc…
5.2 THE DRAWING SHOULD HAVE THE FOLLOWING SPECIFICATIONS
 Proposal Drawing should be in .DWG Format.

 Check and set the UCS to WORLD.
 All objects should be drawn in 2D (2 dimension, Only)
(No Z coordinate 3D) and also elevation should be at 0.
 All objects in the drawing should be drawn using Line, Polyline and Text.
 Layers and Colours should be followed as per the colour code table.
 Remove the unused layers, blocks, dimension styles etc.
 Drawing units and dimension should be in meters.
 Dimension mentioned in drawing should not be exploded.
 All details should be drawn in scale 1:1(True Scale) except solar system, Column
foundation and Topo Sketch etc.
 Avoid unnecessary objects in the drawing.
 In the site plan, Front Setback should be in the Bottom of the drawing.
Page 5 of 110
 In the site plan Side1 (colour: 6) should be in left side & Side2 (colour: 2) should be in
Right side.
 All Details should be submitted in a Single Drawing.
 Avoid unnecessary coordinates in polyline.
 Don’t Overlap the Objects.
 Room Boundary should be drawn excluding the Pillars (Columns).
 Avoid unnecessary “Typical” text in the Drawing.
DRAWINGS WITH EXISTING BUILDING
For drawings with existing building, color codes will be given only for proposed building
whereas the required details of existing building will be provided as input data in the
submission page of the website.
6.0 PROCEDURE TO CREATE DRAWING
Basically three types of AutoCAD Objects are used for drawing generation, via:
1. Line
2 Polyline
3. Open Polyline
3. Text
6.1 PARAMETERS TO BE DRAWN USING LINE OBJECTS
1. Front Set back

2. Rear Set Back
3. Side 1 Set Back (Left)
4. Side 2 Set Back (Right)
5. Road width
6. Entry & Exit Gate
7. Basement Floor Height
8. Stilt Height
9. Basement Floor Height above Ground level
10. Room Clear Height
11. Headroom Height
12. Building Height
13. Total Building Height
Page 6 of 110
14. Mezzanine Floor Height

15. Staircase width
16. Tread
17. Riser
18. Handrail
19. Electrical Room Height
20. Habitation Door width
21. Main Door Width
22. Non Habitation Door width
23. Toilet Height
24. Kitchen Height
25. Class Room Height
1. Super Imposed Site Boundary

2. Patta Land Record or Field Measurement Book boundary
3. As on site Boundary
4. Setback Boundary
5. Open Space Reservation (OSR)
6. Rain Water Harvesting (RWH) (Object: Polyline/Circle)
7. Rain Water Harvesting Dimension (RWH Dimension)
8. Solar System
9. Septic Tank
10. Sewage Treatment Plant
11. Waste Management Provision
12. Transformer Yard
13. Gifted Road
14. Plot Frontage/width
15. Closed Staircase Area
16. Open Staircase Area
17. Staircase Ventilation Area
18. Open & Emergency Staircase Area
19. Parking Area
20. Single Driveway
21. Double Driveway
22. Lorry Driveway
Page 7 of 110
23. Two Wheeler Parking Stall Size

24. Lorry Parking Stall Size
25. FSI Area
26. Non FSI Area
27. Habitation Room area (Hall, living room, Bed room, etc….)
28. Window for habitation area (Hall, living room, Bed room, etc….)
29. Mechanical Ventilation for Habitation Room area
30. Kitchen
31. Dwelling unit (Individual Dwelling Area)
32. Balcony Area
33. Lift Area
34. Open to Sky (OTS)
35. Deductions (Void, Shaft, etc.,)
36. Water Closet (WC)
37. Toilet Area
38. Bath Room Area
39. Ventilator for Non Habitation Room (Water Closet, Toilet, Bath Room, etc….)
40. Corridor Boundary Width
41. Block (Block Details of Group Development)
6.3 PARAMETERS TO BE DRAWN USING TEXT OBJECTS
1. Non FSI Area as per DR (as prescribed in the Annexure)

2. Use of various parts of the building such as kitchen in a dwelling unit, office,
Restaurants, departmental store, shops, Educational, Fire escape etc.
3. Dwelling units numbering or Hotel room numbering
4. Names of blocks, Typical Block text
5. Typical floor text:
In the Text Objects for Typical Floors are followed as
Format: “Floor01, Floor02, Floor03……Floorn th- Typical”
In the Text Objects for Typical Blocks are followed as
Format: “Block01, Block02, Block03……Blocknth- Typical”
7.0 DETAILS OF COLOR CODE FORMAT
Page 8 of 110
7.0 DETAILS OF COLOR CODE FORMAT
RESIDENTIAL
Object
S. No Description Color Code Layer
Type
1. Residential FSI Area 181 Polyline Applicable floor layer*
2. . Corridor Boundary Width 31 Polyline Applicable floor layer*
3. Dwelling Units 230 Polyline Applicable floor layer*
4. Cantilevered Balcony, Utility area 35 Polyline Applicable floor layer*
5. LIG Block FSI Area 15 Polyline Applicable floor layer*
6. LIG Block Dwelling Unit 211 Polyline Applicable floor layer*
7. Kitchen Area 25 Polyline Applicable floor layer*

FLOOR-STILT / FLOOR-
8. Super Imposed Plot Boundary 7 White Polyline
GROUND
Third Party land (within the FLOOR-STILT / FLOOR-
9. 199 Polyline
proposed sites) GROUND
10. Setback Boundary 10 Polyline
GROUND
Open FLOOR-STILT / FLOOR-
11. Plot Frontage/Width of the Site 96
Polyline GROUND
12. Site area before plot frontage 180 Polyline
GROUND
Open Space Reservation Area FLOOR-STILT / FLOOR-
13. 36 Polyline
(OSR) GROUND
14. Parking Area Boundary 5 Polyline Applicable floor layer*
15. Angular Car Parking Stalls 140 Polyline Applicable floor layer*
16. Parallel Car Parking Stalls 147 Polyline Applicable floor layer*
17. Perpendicular Car Parking Stalls 146 Polyline Applicable floor layer*
18. Two Wheeler Parking Stalls 101 Polyline Applicable floor layer*
Physically Challenged Car FLOOR-STILT / FLOOR-
19. 231 Polyline
Parking Stalls GROUND
Physically Challenged Access Open FLOOR-STILT / FLOOR-
20. 231
Distance Polyline GROUND
21. Single Driveway 34 Polyline
GROUND / FLOOR-BF1..
22. Double Driveway 39 Polyline
23. Column (only for parking area) 145 Polyline
24. Physically Challenged Ramp 170 Polyline
Page 9 of 110
Physically Challenged Ramp FLOOR-STILT / FLOOR-

25. 171 Polyline
Landing (Dimension) BF1..
26. Vehicular Ramp One way 107 Polyline FLOOR-STILT / FLOOR-
BF1..
27. Vehicular Ramp Two way 108 Polyline FLOOR-STILT / FLOOR-
BF1..
28. Septic Tank 112 Polyline
GROUND
29. Sewage Treatment Plan 120 Polyline
GROUND
30. Waste Management Provision 55 Polyline
GROUND
31. Rain water Harvesting Trench 42 Polyline
GROUND
Rain water Harvesting FLOOR-STILT / FLOOR-
32. 175 Polyline
Dimension (RWH Dimension) GROUND
33. Transformer Yard 20 Polyline
GROUND
34. Staircase Area 115 Polyline Applicable floor layer*
35. Staircase Ventilation Area 105 Polyline Applicable floor layer*
36. Lift 22 Polyline Applicable floor layer*
37. Gifted Road 118 Polyline
GROUND
38. Non FSI Area 4 Polyline Applicable floor layer*
39. Solar Energy Capture 95 Polyline FLOOR-TERRACE
Habitation Room Area (Hall,
40. 23 Polyline Applicable floor layer*
Living, Bedroom, Bets etc.,)
Window for Habitation Room
(Hall,Living,Bedroom,etc.,)
Ventilator for Water
Closet,Bathroom,Toilet
Mechanical Ventilation for
Habitation Room
44. Water Closet Area 80 Polyline Applicable floor layer*
45. Toilet Area 81 Polyline Applicable floor layer*
46. Bath Area 83 Polyline Applicable floor layer*
Voids, Ducts, Shafts
(Deductions)
48. OTS within FSI Area 11 Polyline Applicable floor layer*
Open
49. Staircase Access Distance 194 Applicable floor layer*
Polyline
Parking Area (only for Hill Station
and Hill Area only)
51. Outermost Plotting Boundary 64 Polyline
GROUND
Page 10 of 110
52. Setback (Front) 4 Line
GROUND
53. Setback (Side1) 6 Line
GROUND
GROUND
55. Setback (Rear) 3 Line
GROUND
56. Kitchen Height 25 Line Applicable floor layer*
57. Height of the Building 151 Line
GROUND
58. Total Height of the Building 233 Line
GROUND
59. Stilt Floor Height 21 Line FLOOR-STILT
FLOOR-BF1, FLOOR-BF2
60. Basement Floor Height 123 Line
etc.
Basement Floor Height above
61. 105 Line FLOOR-GROUND
Ground Level
Electrical Transformer Room FLOOR-STILT / FLOOR-
62. 160 Line
Height GROUND
63. Road Width 41 Line
GROUND
64. Headroom Height 211 Line Applicable floor layer*
65. Room Clear Height 210 Line Applicable floor layer*
FLOOR-
66. Mezzanine Floor Height 23 Line
MFStartfloorTOEndFloor
67. Toilet Height 81 Line Applicable floor layer*

Habitation Door Width (Hall,
68. 22 Line Applicable floor layer*
Living, Bedroom, etc.,)
Non Habitation Door Width (WC,
Toilet, Bathroom etc.,)
70. Main Door Width (Entrance 84 Line Applicable floor layer*
Door)
71. Entry & Exit Gates 161 Line
GROUND
72. Tread 190 Line Applicable floor layer*
73. Riser 192 Line Applicable floor layer*
74. Handrail 193 Line Applicable floor layer*
75. Staircase Width 191 Line Applicable floor layer*
Non FSI Room Name
76. 4 Text Applicable floor layer*
(Refer Heading 8.0)
Page 11 of 110
Floor Naming and Typical Text

77. 7 White Text Applicable floor layer*
for Identifying Typical Floors
Dwelling Units Numbering and
Kitchen Text
79. Kitchen-dining 25 Text Applicable floor layer*
80. Kitchen without store 25 Text Applicable floor layer*

Block Naming and Typical Block FLOOR-STILT / FLOOR-
81. 50 Text
text GROUND
LIG Dwelling Units Numbering
and Kitchen Units
83. Fire Staircase 115 Text Applicable floor layer*
*Applicable floor layer refers to the corresponding relevant floor level.
COMMERCIAL
Object
Type
1. Commercial FSI Area 6 Polyline Applicable floor layer*
2. Corridor Boundary Width 51 Polyline Applicable floor layer*

Whit FLOOR-STILT / FLOOR-
3. Super Imposed Plot Boundary 7 Polyline
e GROUND
4. 199 Polyline
GROUND
Polyline GROUND
GROUND
8. 36 Polyline
(OSR) GROUND
14. 231 Polyline
15. 231
Page 12 of 110
20. 171 Polyline
21. Vehicular Ramp One way 107 Polyline
BF1..
22. Vehicular Ramp Two way 108 Polyline
BF1..
GROUND
GROUND
GROUND
GROUND
Parking Area (only for Hill Station
and Hill Area only)
Rain water Harvesting Dimension FLOOR-STILT / FLOOR-
28. 175 Polyline
(RWH Dimension) GROUND
GROUND
33. Gifted Road 118 Polyline Applicable floor layer*
35. Solar Energy Capture 95 Polyline Applicable floor layer*
36. Habitation Room Area 23 Polyline Applicable floor layer*

(Hall, Living, Bedroom, etc.,)
Ventilator for Water Closet,
Bathroom, Toilet
Habitation Room

(Deductions)
45. Seating Area 106 Polyline Applicable floor layer
Page 13 of 110
46. Outermost Plotting Boundary 64 Polyline Applicable floor layer

Open
Polyline
GROUND
GROUND
GROUND
GROUND
GROUND
GROUND
FLOOR-BF1, FLOOR-
BF2...
Ground Level
57. 160 Line
Height GROUND
GROUND

FLOOR-
Toilet, Bathroom, etc.,)
65. Main Door Width (Entrance Door) 84 Line Applicable floor layer*
GROUND

Non FSI Room Name
(Refer Heading 8.0)
Floor Naming and Typical Text Whit
for Identifying Typical Floors e
Page 14 of 110
Building Use Text (Refer

Heading 10.0)
INSTITUTIONAL
Object
Type
1. Institutional FSI Area 33 Polyline Applicable floor layer*
3. Institutional verandah 221 Polyline Applicable floor layer
4. Staircase Mid Landing 172 Polyline Applicable floor layer*

GROUND
6. 199 Polyline
GROUND
Polyline GROUND
GROUND
10. 36 Polyline
(OSR) GROUND
16. Cycle space (Area) 100 Polyline Applicable floor layer*

Physically Challenged Car
Parking Stalls
Physically Challenged Access Open
18. 231 Applicable floor layer*
Distance Polyline
Page 15 of 110
BF1..
23. 171 Polyline
Landing (Dimension) GROUND / FLOOR-BF1..
24. Vehicular Ramp One way 107 Polyline FLOOR-STILT / FLOOR-
BF1..
BF1..
GROUND
GROUND
GROUND
GROUND
Rain water Harvesting FLOOR-STILT / FLOOR-
30. 175 Polyline
Dimension (RWH Dimension) GROUND
GROUND

GROUND
38. Class Room Area 23 Polyline Applicable floor layer*

Bathroom, Toilet
Habitation Room
45. Voids, Ducts, Shafts 3 Polyline Applicable floor layer*

(Deductions)
Page 16 of 110

Open
Polyline
Parking Area (Hill Station and
Hill Area only)
49. Outmost Plotting Boundary 64 Polyline
GROUND
GROUND
GROUND
GROUND
GROUND
GROUND
GROUND
etc.
Ground Level
59. 160 Line
Height GROUND
GROUND

FLOOR-
65. Class Room Door Width 22 Line Applicable floor layer*

GROUND
Page 17 of 110

Parapet Wall Width (Institutional-
School only)
Parapet Wall (Institutional-
School only)
Building Wall Width (Institutional-
School only)
Door Height (Institutional-School
only)
76. Class Room Height 98 Line Applicable floor layer*
Non FSI Room Name

(Refer Heading 8.0)
Heading 10.0)
Floor Naming and Typical Text Whit
for Identifying Typical Floors e
INDUSTRIAL
Object
Type
1. Industrial FSI Area 134 Polyline Applicable floor layer*

GROUND
4. 199 Polyline
GROUND
6. Plot Frontage/Width of the Site 96 Polyline
GROUND
GROUND
9. Lorry Parking Stall 144 Polyline
GROUND
10. Cycle space (Area) 100 Polyline Applicable floor layer*
11. Lorry Driveway 43 Polyline FLOOR-GROUND
Page 18 of 110
13. Physically Challenged Ramp 170 Polyline Applicable floor layer*

Physically Challenged Ramp
Landing (Dimension)
15. Vehicular Ramp One way 107 Polyline Applicable floor layer*
16. Vehicular Ramp Two way 108 Polyline Applicable floor layer*
GROUND
GROUND
GROUND
GROUND
21. 175 Polyline
GROUND

GROUND
30. Window for Habitation room 103 Polyline Applicable floor layer*
Bathroom, Toilet
Habitation Room

(Deductions)
37. OTS within FSI area 11 Polyline Applicable floor layer*
Page 19 of 110
Parking Area (Hill Station and Hill

Area only)
GROUND
Open
Polyline
GROUND
GROUND
GROUND
GROUND
GROUND
GROUND
FLOOR-BF1, FLOOR-
BF2...
Ground Level
50. 160 Line
Height GROUND
GROUND

FLOOR-
56. Door and Rolling Shutter Width 22 Line Applicable floor layer*
GROUND
Page 20 of 110

Non FSI Room Name
(Refer Heading 8.0)
Building Use Text
(Refer Heading 10.0)
66. Industrial-office 134 Text Applicable floor layer*
HOTEL
Object
Type
1. Hotel FSI Area 122 Polyline Applicable floor layer*
3. Hotel Room 32 Polyline Applicable floor layer*
4. Cantilevered Balcony 35 Polyline Applicable floor layer*

GROUND
6. 199 Polyline
GROUND
Polyline GROUND
GROUND
10. 36 Polyline
(OSR) GROUND
Page 21 of 110
Physically Challenged Car

Parking Stalls
Physically Challenged Access Open
17. 231 Applicable floor layer*
Distance Polyline
22. 171 Polyline
BF1..
BF1..
GROUND
GROUND
GROUND
GROUND
29. 175 Polyline
GROUND
GROUND

Page 22 of 110

Bathroom, Toilet
Habitation Room

(Deductions)
45. OTS within FSI area 11 Polyline Applicable floor layer*
Open
Polyline
Parking Area(Hill Station and Hill
Area only)
GROUND
GROUND
GROUND
GROUND
GROUND
GROUND
GROUND
FLOOR-BF1, FLOOR-
BF2...
Ground Level
58. 160 Line
Height GROUND
GROUND

FLOOR-
Page 23 of 110
64. Habitation Door Width 22 Line Applicable floor layer*

GROUND

Non FSI Room Name
(Refer Heading 8.0)
74. Hotel Room Numbering Text 32 Text Applicable floor layer*
Heading 10.0)
HOSPITAL
Object
Type
1. Hospital FSI Area 110 Polyline Applicable floor layer*
3. Bed Space Area 190 Polyline Applicable floor layer*
GROUND
5. 199 Polyline
GROUND
7. Plot Frontage/Width of the Site 96 Polyline
GROUND
GROUND
9. 36 Polyline
(OSR) GROUND
Page 24 of 110
15. 231 Polyline
16. 231
BF1..
21. 171 Polyline
BF1..
23. Vehicular Ramp Two way 108 Polyline
BF1..
GROUND
GROUND
GROUND
GROUND
28. 175 Polyline
GROUND
GROUND
Bathroom, Toilet
Habitation Room
Page 25 of 110

(Deductions)
Parking Area (Hill Station and Hill FLOOR-STILT / FLOOR-
45. 111 Polyline
Area only) GROUND
GROUND
Open
Polyline
GROUND
GROUND
GROUND
GROUND
GROUND
GROUND
etc.
Ground Level
57. 160 Line
Height GROUND
GROUND
FLOOR-
Toilet, Bathroom, Kitchen, etc.,)
GROUND
Page 26 of 110

Non FSI Room Name
(Refer Heading 8.0)
Building Use Text
(Refer Heading 10.0)
73. Bed Space Text 190 Text Applicable floor layer*
8.0 FSI PARAMETERS FOR INCIDENTAL STRUCTURES
The following parameters are included in the FSI area as per DCR.
1. Motor Room Area (Permissible Area = 2 sq.m & Height = 1.8 m)
2. Electrical Meter Room
3. Electrical Transformer Room
4. Generator Room
5. Meter Room
6. Association Room
7. Air Handling Unit
8. Air Conditioning Plant Room
9. Switch Gear Room
10. Air Conditioning Plant Room
11. Gym
12. Letter Box
13. Lumber Room
14. Pump Room
The incidental structures to the main activities such as water closet or pump room,
transformer room, transformer yard, electrical room shall not be construed as individual
blocks.
Page 27 of 110
9.0 NON FSI PARAMETERS
The following parameters are not included in the FSI area as per DCR.
1. Driver Bathroom
2. Driver Water Closet
3. Servant Bathroom
4. Servant water Closet
5. Caretaker Booth
6. Watchmen Booth (Permissible Size 2.5 m x 2.5 m) (Height 3.0 m)
7. Water Closet
Note: The above Non FSI parameters to be drawn only in Ground Floor or Stilt Parking Floor.
10.0 NON FSI TEXT
The Following are the list of Non FSI text which are to be used while drawing the plan and it
shall be correctly typed completely within the polyline in the drawing file so as to be captured by the
software for considering them as Non-FSI area as per DR.
Driver Bathroom Caretaker Booth

Driver Water Closet Watchmen Booth
Servant Bathroom Water Closet
Servant water Closet
11.0 COMMERCIAL BUILDING USE TEXT ORDERED AS PER CATEGORY
The following are the list of Commercial Building use text which are to be used while drawing
the plan and it shall be correctly typed completely within the polyline in the drawing file so as to be
captured by the software for considering them as Building Use area as per DR.
Air-Conditioned Cinema Theatre Assembly Hall

ATM ATM Centre
Auditorium Bakery Shop
Bank Bank-Service
Boarding House Multi Level Parking Lots
Business Office Chennai City Corporation office
Page 28 of 110
Cinema Halls Clinic

Computer Technology Application
Computer Centre
Building
Confectionary Shop Consulate
Cycle Repair Shop Daily Market
Departmental Store Dispensary
Dormitory Dubbing Theatre
Electricity Board Office Embassy
Experimental Laboratory Farm
Flower Shop Foreign Mission
Fruit Shop Fuel Filling station
Garden Govt Office
Hairdressing Saloon Health Facility
Hotel Internet centre
Kalyana Mandapam Library
Lodging House Market
Meat Shop Milk Kiosk
Multiplex Complex Mutton Stall
Office Park
Wholesale stores, Godown &
Pay Office
Warehouse
Play Ground Post Office
Preview Theatre Professional Consulting Office
Reading Room Research Laboratory
Restaurant Retail Sale
Retail shop Safe Deposit Vault
Semi Govt Office Sewage Pumping Station
Shop Shopping Centre
Storage of Domestic Cooking Gas
Storage of Commodity
Cylinder
Store Super Market
Tamil Nadu Cooperative Milk Producers
Tailoring Shop
Federation Limited Office
Hospital, Nursing homes Telecasting Station
Telecommunication Station Telephone Exchange
Testing Laboratory Transport Depot
Vegetable Shop Industrial, Factory
Page 29 of 110
Government School, Private School,

Weekly Market
College
Religious Tutorial/Parallel colleges
Software/Hardware and other training
Telegraph Offices
institutes
Telephone Offices Cold Storage
Other Offices Resort, Club house
IT Offices Recreational Club
IT Enabled Services Hostel
Bio Informatics Centres Star hotel
Crematorium Unstar hotel
Swimming Pool Old age Home
Automobile Showrooms Transport Terminals
Broadcasting Station
12.0 How to Submit the Drawing
Page 30 of 110
12.0 HOW TO SUBMIT THE DRAWING
12.1 REGISTRATION PROCESS
The Architect/Licensed Builders has to create a user account online for submitting Application
& Drawing. The Architect/Licensed Building Surveyors need to provide a valid email address,
username and password for Registration.
Page 31 of 110
12.2 LOGIN PROCESS
Once the Registration process gets completed, Architect/Licensed Builders will receive mail
from the Development Authority office. Architect/Licensed Building Surveyors has to login using
username and password which is provided in the Registration process.
Page 32 of 110
New Plan Submission: To submit a new proposal without exciting, click the “New
Proposal” option from the Plan menu.
New Plan Submission with existing building: To submit a new proposal with exciting,
click the “With Existing” option from the Plan menu.
Page 33 of 110
Page 34 of 110
Page 35 of 110
Page 36 of 110
Page 37 of 110
Page 38 of 110
Page 39 of 110
Page 40 of 110
12.4 REFERENCE NUMBER DETAILS
Architect/Licensed Builders will get an Unique ID for the submission of Application. This will
be used for finding the status of this Application in future.
Page 41 of 110
13.0 ANNEXURE PARAMETERS SNAPSHOT
Page 42 of 110
Description Layer
AOS Plot extent shall be drawn as Polyline in Color No. 2. FLOOR-GROUND

(or)
FMB/PLR Plot extent shall be drawn as Polyline in Color No. 30. FLOOR-STILT
Super-Imposed plot extent (Color No. 7). After drawing AOS and
PLR/FMB one over the other, the Super imposed plot extent shall be
generated to be the minimum of the Two said before.
AOS SITE EXTENT Super Imposed

Plot Extent Plot Boundary
Polyline Polyline
Color Color
Number 2 Number 7
FMB/PLR
Plot Extent
Polyline
Color
Number 30
SITE PLAN
Page 43 of 110
Description Layer
Setback boundary shall be drawn as Polyline in Color No. 10. FLOOR-GROUND

(or)
FLOOR-STILT
SETBACK BOUNDARY
Setback
Boundary
Polyline
Color
Number 10
EXIT
D4
12.00 M
WIDE R
MDW
WATER CLOSET
OAD
D4
NING LINE
ROAD WIDE
ENTRY
SITE CUM STILT FLOOR PLAN
Page 44 of 110
Description Layer
If a Third party land ('c' in the snapshot below) FLOOR-GROUND

is in between two proposed sites('a' and 'a' in the snapshot below), (or)
then show the Third party land in color 199 FLOOR-STILT
within the super imposed plot boundary color 7.
THIRD PARTY LAND
Super imposed
plot boundary Third party land
Polyline Polyline
Color Color
Number 7 Number 199
Page 45 of 110
Description Layer
Plot frontage / Width of site shall be drawn as Open Polyline FLOOR-GROUND

in Color No. 96. (or)
FLOOR-STILT
PLOT FRONTAGE / WIDTH OF SITE
12.00 M WIDE ROAD

Lift
Shaft
0.91m
x 1.82m
+0.15m Lvl
D2
Passage
Meter Room Tread - 0.25m
Riser - 0.15m
Width - 1.00m
UP
ELECTRICAL TRANSFORMER ROOM
V V
Servants
V
Toilet
D1
O.S.R
20.00 M WIDE ROAD
Plot
Frontage
Open Polyline
Color
Number 96
Page 46 of 110
Description Layer
Site area before plot frontage situated beside a third party FLOOR-GROUND
land shall be drawn as Polyline in Color No. 180. (or)
FLOOR-STILT
SITE AREA BEFORE PLOT FRONTAGE
12.00 M WIDE ROAD

O.S.R
Third party land
9m
20.00 M WIDE ROAD
Plot Site area before

Frontage plot frontage
Open Polyline Polyline
Color Color
Number 96 Number 180
Page 47 of 110
Description Layer
Open Space Reservation shall be drawn as polyline using the FLOOR-GROUND

Color No. 36. (or)
FLOOR-STILT
OPEN SPACE RESERVATION

Block - B
Block - C
Block - A
O.S.R
Polyline
Color
Number 36
Page 48 of 110
Description Layer
Parking Area boundary shall be drawn as polyline in the Color No. 5. FLOOR-GROUND
(or)
FLOOR-STILT
Deduction shall be drawn as polyline in the Color No. 3. (or)
FLOOR-BF1
Staircase shall be drawn as polyline in the Color No. 115. (or)
FLOOR-BF2
Lift shall be drawn as polyline in the Color No. 22. (or)
Any Suitable Layer
PARKING AREA, DEDUCTION
STAIRCASE AND LIFT
Parking
Boundary Deduction
Polyline Polyline
Color Color
Number 5 Number 3
Rolling Shutter
Lift
Shaft
Duct GENERATOR ROOM
PUMP ROOM
Staircase
Lobby UP
LUMBER ROOM
SITE / FLOOR PLAN
Page 49 of 110
Description Layer
Parallel car Parking Stall shall be drawn as polyline in the FLOOR-GROUND

Color No. 147. (or)
Perpendicular car Parking Stall shall be drawn as polyline in FLOOR-STILT
the Color No. 146. (or)
FLOOR-BF1
Angular car Parking Stall shall be drawn as polyline in the (or)
Color No. 140. FLOOR-BF2
*Respective driveway is compulsory for four wheeler parking. (or)
FLOOR-MPx
Parallel CAR PARKING STALLS Perpendicular

Polyline Polyline
Color Color
6 M DRIVEWAY
6 M DRIVEWAY
6 M DRIVEWAY
PROPOSED BUILDING
6 M DRIVEWAY
In
Angular Gate 5.5 m Wide
Polyline
Color
Number 140
Page 50 of 110
Description Layer
Two Wheeler Parking Stall shall be drawn as polyline in the FLOOR-GROUND

Color No. 101. (or)
FLOOR-STILT
(or)
FLOOR-BF1
(or)
FLOOR-BF2
(or)
FLOOR-MPx
TWO WHEELER PARKING STALLS
TWO WHEELER
PARKING
Polyline
Color
Number 101
Lift
Shaft Shaft
0.91m
5 x 1.82m 4
5 +0.15m Lvl
D2
Passage
Meter Room Tread - 0.25m
Riser - 0.15m
Width - 1.00m
UP
6 4
+0.15m Lvl
Electrical
Room 2
7 V V
2
Servants
V
Toilet
D1+0.15m Lvl
STILT FLOOR PLAN
Page 51 of 110
Description Layer
Physically challenged Parking Stall shall be drawn as polyline FLOOR-GROUND

in the Color No. 231. (or)
FLOOR-STILT
Physically challenged Access Distance shall be drawn as (or)
Open polyline in the Color No. 231 from each stall. FLOOR-BF1
(or)
All Columns shall be drawn as polyline in the Color No.145 . FLOOR-BF2.
PHYSICALLY CHALLENGED PARKING STALLS

AND ACCESS DISTANCE
Physically Challenged
Car Parking stall
Polyline
Color
Number 231
Lift
Shaft Shaft
0.91m
5 5 x 1.82m
+0.15m Lvl 4
D2
Passage
Meter Room
UP
6
3.04 m wide
driveway for +0.15m Lvl
electrical Electrical
panel room Room 2
7 2
V V
Servants
V
Toilet
D1
SITE / FLOOR PLAN

COLUMN
Polyline
Physically Challenged
Color
Access Distance
Number 145
Open Polyline
Color
Number 231
Page 52 of 110
Description Layer
Lorry Parking stall shall be drawn as Polyline in Color No. 144. FLOOR-GROUND
(or)
Lorry Driveway shall be drawn as polyline using the Color No. 43. FLOOR-STILT
(or)
FLOOR-BF1
(or)
FLOOR-BF2.
*Driveway is compulsory for lorry parking.
LORRY PARKING STALL

Lorry
Driveway
Lorry Parking Polyline
Stall Color
Polyline 7 M. DRIVEWAY Number 43
Color
Number 144
7 M. DRIVEWAY
7 M. DRIVEWAY
GODOWN
Page 53 of 110
Description Layer
Single Driveway shall be drawn as Polyline in Color No. 34. FLOOR-GROUND

(or)
FLOOR-STILT
(or)
FLOOR-BF1
(or)
FLOOR-BF2
(or)
FLOOR-MPx.
SINGLE DRIVEWAY
3 M DRIVEWAY
3 M DRIVEWAY
3 M DRIVEWAY
PROPOSED BUILDING
3 M DRIVEWAY
In
Single Driveway Gate 3 m Wide

Polyline
Color
Number 34
Page 54 of 110
Description Layer
Double Driveway shall be drawn as Polyline in Color No. 39. FLOOR-GROUND

(or)
FLOOR-STILT
(or)
FLOOR-BF1
(or)
FLOOR-BF2
(or)
FLOOR-MPx.
DOUBLE DRIVEWAY
6 M. DRIVEWAY
OFFICE
6 M. DRIVEWAY
6 M. DRIVEWAY
G + 12
Double
Driveway
Polyline
Color
Number 39
Page 55 of 110
Description Layer
Physically challenged Ramp Landing shall be drawn as polyline in the FLOOR-STILT

Color No. 171. (or)
FLOOR-BFx
(or)
Any Suitable Layer.
Physically challenged Ramp shall be drawn as polyline in the Color
No. 170 and Text as specified is to be kept inside the Polyline.
PHYSICALLY CHALLENGED RAMP

Physically
challenged
Ramp
Polyline and Text
V V V V
D2 Color
U
TOILET G.TOILET TOILET
P.H.TOILET Number 170
1.22 X 1.22 1.79 X 1.22 1.22 X 1.22
U 1.79 X 1.22
D2 D2 D2
(1:12 SLOPE)
SHOP
R.S.
Physically
challenged
Ramp Landing
Dimension
Polyline
Color
Number 171
Page 56 of 110
Description Layer
Vehicular Ramp-One Way shall be drawn as polyline in the Color No. FLOOR-STILT
107 and Text as specified is to be kept inside the Polyline. (or)
FLOOR-BFx
(or)
Any Suitable Layer.
VEHICULAR RAMP-ONE WAY
37 38 39 40 41 42
(8)CAR PAR.(RESI.)
8.16+8.42/2X 64.84 = 537.52
3.00 MT. DRIVEWAY

2.00 MT. DRIVEWAY
2.00 MT. DRIVEWAY
2.00 MT. DRIVEWAY

(1:8 S
LOPE)
(10)SCOOTER PARK.
(RESI.)
6.49+9.09/2X18.47=143.88
SLAB LOAD BEARING PLATFORM

CAPACITY OF 40 TONS 4.50X6.00 4.00 MT. DRIVEWAY
Vehicular
Ramp
One Way
Polyline and Text CAR PARKING (RESI.)
4.81 X 6.10 = 29.34
Color
Number 107
Page 57 of 110
Description Layer
Vehicular Ramp-Two Way shall be drawn as polyline in the Color No. FLOOR-STILT
108 and Text as specified is to be kept inside the Polyline. (or)
FLOOR-BFx
(or)
Any Suitable Layer.
VEHICULAR RAMP-TWO WAY
(1:8 SLOPE)
Vehicular Ramp
Two Way
Polyline and Text
Color
Number 108
Page 58 of 110
Description Layer
Septic tank shall be drawn as polyline in the Color No. 112. FLOOR-STILT
(or)
FLOOR-GROUND
SEPTIC TANK
FIRST FLOOR
PROJECTION ABOVE
EXIT
D4
12.00 M
WIDE R
MDW
WATER CLOSET
OAD
D4
NING LINE
ROAD WIDE
ENTRY
Septic Tank
Polyline SITE CUM STILT FLOOR PLAN
Color
Number 112
Page 59 of 110
Description Layer
Waste management provision shall be drawn as polyline in the Color No. FLOOR- STILT
55. The space shall abut road or gate. (or)
FLOOR-GROUND
WASTE MANAGEMENT PROVISION
Waste
Management
Provision
Polyline
Color
Number 55
SITE PLAN
Page 60 of 110
Description Layer
Rain water harvesting trench shall be drawn as polyline in the Color No. FLOOR- STILT
42. (or)
FLOOR-GROUND
Rain water harvesting trench dimension shall be drawn as polyline in the

Color No. 175.
RAIN WATER HARVESTING TRENCH AND DIMENSION

Rain Rainwater Harvesting Trench
Water
Harvesting
Rainwater Harvesting Trench
Trench
Polyline
Color

Number 42
PROPOSED BUILDING
R.C.C. Beam
9.9 [0.25]
Rain Water Pipe

115 thk. brick wall
Rain
39.4 [1.00]
118.3 [3.01]
98.6 [2.50]
INSIDE
Water
49.3 [1.25]
14.8 [0.38]
Slope 1 in 20
Harvesting
5 to 7.5 c.m.
size pebbles
Plinth beam Pit Dimension
98.6 [2.50]
230Ø R.C.C. pile every

3000 @ 1500 deep Polyline
Perculation
Pit.
Color
64.1 [1.63]
Number 175
Percolation pit
Scale 1:1
Page 61 of 110
Description Layer
Open transformer yard shall be drawn as polyline in the Color No. 20. FLOOR- STILT
(or)
FLOOR-GROUND
OPEN TRANSFORMER YARD

Open
Transformer Yard
Polyline
Color
Number 20
EXIT
12.00 M
D4
WIDE R
MDW
OAD
WATER CLOSET
NING LINE
D4
ROAD WIDE
ENTRY
Page 62 of 110
Description Layer
For Normal Staircase Color No.115 polyline is to be drawn. FLOOR- STILT

(or)
FLOOR-GROUND
For Fire Escape staircase Color No. 115 is to be drawn and Text as
specified is to be kept inside the Polyline.
STAIRCASE AND FIRE ESCAPE
TOILET TOILET
V
V
W1 W1
D1 MAIN STAIRCASE D1
Staircase
Polyline
Color BED ROOM-2 BED ROOM-2
Number 115
7'-0" WIDE CORRIDOR
SD SD
LIFT
COM.SHAFT
FIRE SHAFT
LIFT
Fire Escape
Polyline and Text SHAFT
FIRE ESCAPE
Color
Number 115
TOILET TOILET
V V
D1 D1
Page 63 of 110
Description Layer
Stair Ventilation shall be drawn as polyline in the Color No. 105. The size The same Floor
of the rectangle shall be equal to the size of the actual window or layer where
ventilator. staircase exists.
STAIR VENTILATION
TOILET TOILET
Staircase V
V
Ventilation W1 W1
Polyline D1 MAIN STAIRCASE D1
Color
Number 105
BED ROOM-2 BED ROOM-2
7'-0" WIDE CORRIDOR
SD SD
LIFT
COM.SHAFT
FIRE SHAFT
LIFT
SHAFT
FIRE ESCAPE
TOILET TOILET
V V
D1 D1
Page 64 of 110
Description Layer
Open staircase shall be drawn as a Polyline in the Color No. 114 and In all the floors
Text as 'FIRE ESCAPE' is to be kept inside the Polyline in the same wherever
color. applicable
Open OPEN STAIRCASE

Staircase
PolyLine and Text
Color
Number 114
W W
V
TOILET
W
HALL
D 13.68 X 6.37
FIRE ESCAPE
Ver.
BED ROOM
12.05 X 7.40 W
MD
W W
UP
Page 65 of 110
Description Layer
Lift shall be drawn as polyline in the Color No. 22. The same Floor
layer where Lift
exists.
LIFT
DN
UP
DW2
LIFT
LIFT
W5
Lift
Polyline
Color
Number 22
Page 66 of 110
Description Layer
Sewage Treatment Plant shall be drawn as polyline in the Color No. 120. FLOOR- STILT
(or)
FLOOR-GROUND
SEWAGE TREATMENT PLANT

SEWAGE
TREATMENT
PLANT
Polyline
Color
Number 120
SEW
A
[BEL GE TR
OW EA
GRO TMEN
UND T PLA
LEV N
EL] T
32
31 13 14
15 16
SITE / FLOOR PLAN
Page 67 of 110
Description Layer
Gifted roads, i.e. those areas within the site gifted to Local Body or FLOOR-GROUND
Authority for connectivity purpose shall be drawn as polyline using the (or)
Color No. 118. FLOOR-STILT
GIFTED ROAD
To be Gifted
for Road
Polyline
A-Block B-Block Color
Number 118
C-Block
Page 68 of 110
Description Layer
Incidental structures for a building shall be drawn as polyline in Color No. FLOOR-GROUND
4 with a text in the same Color. These are also referred to as Non FSI (or)
area. The text shall be strictly one from the Incidental Structure Names. FLOOR-STILT
Otherwise software will mark the text as wrong.
NON FSI AREA
Non FSI
Text
Color
Number 4
Rolling Shutter
Lift
Shaft
OTS
Duct
DRIVER BATHROOM CARETAKER BOOTH
Staircase
Lobby UP
SERVANT BATHROOM
SITE / FLOOR PLAN

Incidental Structures
Polyline
Color
Number 4
Page 69 of 110
Description Layer
FSI area for a Residential building shall be drawn as polyline in the Color In all the floors
no. 181. wherever
applicable.
The deductions such as OTS shall be drawn in Polyline in the Color No.
11.
FSI AREA
W/R W/R
Bath Bath
Bal. 1.98x1.20 1.98x1.20 Bal.
Terrace
Bed Bed
3.05x3.05 W.C. W.C. 3.05x3.05
1.20x1.20 1.20x1.20
Bal.
Kitchen
3.05x1.935
Liv/Din Liv/Din
3.43x5.645 3.43x5.645
A.H.U
3.43x5.645
Bed
3.05x3.05
W/R
4.19x1.20 Lift
1.98x1.75
Liv/Din
5.18x2.82
W.C.
1.20x1.20
Lobby
Bath OTS. 3.81x2.07
1.30x1.41
DN UP
Bed Bed
3.05x3.05 2.44x3.05 Kitchen
3.54x2.13
W/R W/R
Bal.
FSI (Residential) OTS

Polyline
Polyline
Color
Color FLOOR PLAN Number 11
Number 181
Page 70 of 110
Description Layer
Dwelling units boundary shall be drawn as polyline in the Color No. 230 In the same layer as
with Dwelling unit number or name as text in the same Color. Additionally the Residential FSI
another text 'KITCHEN' shall be placed. Both the text mentioned above Polyline.
shall be completely enclosed inside the dwelling unit of polyline.
DWELLING UNITS BOUNDARY AND TEXT
W/R W/R
Bath Bath
Bal. 1.98x1.20 1.98x1.20 Bal.
Bed Terrace Bed
3.05x3.05 W.C. W.C. 3.05x3.05
1.20x1.20 1.20x1.20
KITCHEN KITCHEN
Bal. Bal.
3.05x1.935
A2 3.05x1.935
A1 Duct Duct
Liv/Din Liv/Din
Bed 3.43x5.645 3.43x5.645 Bed
3.05x3.05 3.05x3.05
W/R W/R
Name of 4.19x1.20 Lift

1.98x1.75
Liv/Din
Dwelling A3 5.18x2.82
W.C.
Unit 1.20x1.20
Lobby
Text Bath 3.81x2.07
1.30x1.41 Duct
1.20x.95 DN UP
Color
Bed Bed
Number 230 3.05x3.05 2.44x3.05 KITCHEN
3.54x2.13
Kitchen
W/R W/R
Text Bal.
Dwelling Units
Text Polyline
Color Color
Page 71 of 110
Description Layer
Kitchen Area shall be drawn as Rectangular polylines in Color No. 25. In the same layer as
the Residential FSI
Polyline.
KITCHEN AREA
Kitchen Area
Polyline
Color
Number 25
balcony balcony
Bath Bath
W.C.
W.C.
1.20x1.20
1.20x1.20
Bed Bed
3.05x3.05 3.05x3.05
01 02
Kitchen Kitchen
3.05x1.935 3.05x1.935
3.05x1.935 3.05x1.935
Kitchen Kitchen
03 04
3.05x3.05 3.05x3.05
1.20x1.20
1.20x1.20
Bed Bed
W.C.
W.C.
Bath Bath
balcony balcony
Page 72 of 110
Description Layer
Kitchen Area shall be drawn as polyline and Text in the Color No. 25. In the same layer as
the Residential FSI
Polyline.
KITCHEN AREA WITH DINING AND KITCHEN AREA WITHOUT STORE

Kitchen Area with Dining
Polyline & Text
Color
Number 25
W/R W/R
Bath Bath
1.98x1.20 1.98x1.20 Bal.
KITCHEN & DINING Terrace KITCHEN & DINING
3.05x3.05 W.C. W.C. 3.05x3.05
1.20x1.20 1.20x1.20
KITCHEN-DINING
KITCHEN-DINING
Bal.
DUCT TOILET DUCT

TOILET
3.05x1.935
3.05x1.935
A2
A1 Duct Duct
Liv/Din Liv/Din
Bed 3.43x5.645 3.43x5.645 Bed
3.05x3.05 3.05x3.05
W/R W/R
4.19x1.20 Lift
1.98x1.75
Liv/Din
5.18x2.82
A3 W.C.
1.20x1.20
Lobby
Bath 3.81x2.07
1.30x1.41 Duct
1.20x.95 DN UP
Bed Store
3.05x3.05 2.44x3.05 KITCHEN WITHOUT STORE
Kitchen
3.54x2.13
W/R W/R
Bal. Kitchen Area without Store
Polyline & Text
Color
Number 25
Page 73 of 110
Description Layer
If a Duplex unit exists combining FLOOR-GROUND and FLOOR1, the lower Base floor of
floor's dwelling unit polyline shall be drawn in FLOOR-GROUND and the upper the duplex unit.
floor's dwelling unit ployline shall also be placed in FLOOR-GROUND,with a
cutout of deduction Color No. 11 corresponding to any open area in the upper
floor shall be drawn in FLOOR1, Additionally 'KITCHEN" text shall be given in
lower floor and 'KITCHEN-BELOW' text shall be given in the upper floor. There is
no change in FSI polyline layers. The Dwelling unit names should also be the
same. In this example, below A2 is Duplex, whereas A1 and B1 are single units.
DUPLEX DWELLING UNIT

WINDOW# WINDOW# WINDOW#
D1 D1
D1
W1 W1
GUEST HALL
KITCHEN DINING
D2 D2
D1
D1 D1 LIVING D1 D1
CORRIDOR WIDTH - 2.00 M. WIDE

W1
A2 W1
A2
CORRIDOR WIDTH - 2.00 M.
BED ROOM - 1 BED ROOM - 2 BED ROOM - 1 BED ROOM - 2

D2 D2 D2 D2
TOILET W2 W2 TOILET W1 TOILET W2 W2 TOILET W1

D1
V1
V1
V1
V1
OTS OTS OTS OTS
W1 W1 D1 D1 W1 W1 D1 D1
D1 D1
W1 W1
KITCHEN DINING KITCHEN DINING
D1 D1
D1 D1 HALL D1 D1 HALL
W1
BED ROOM - 1 BED ROOM - 2 A1 W1
BED ROOM - 1 BED ROOM - 2 B1
D2 D2 D2 D2
TOILET W2 W2 TOILET W1 TOILET W2 W2 TOILET W1

V1
V1
V1
V1
OTS OTS OTS OTS

W1 W1 W1 W1
GROUND FLOOR FIRST FLOOR

Dwelling unit OTS
Polyline & text
Polyline & text FLOOR-GROUND
Color
Color [LAYER]
Number 11
Number 230
KITCHEN KITCHEN-BELOW
A2 A2
CORRIDOR
CORRIDOR
OTS OTS OTS OTS
KITCHEN KITCHEN
A1 B1
FLOOR-GROUND[LAYER] FLOOR01[LAYER]
Page 74 of 110
Description Layer
Cantilevered balconies shall be drawn as polyline in the Color No. 35. In all the floors
The Residential FSI polyline and dwelling unit polyline shall completely wherever
enclose the Balcony polyline. applicable.
RESIDENTIAL BALCONY
W/R W/R
Bath Bath
Balcony
1.98x1.20 1.98x1.20
Balcony
Bed Terrace Bed
3.05x3.05 W.C. W.C. 3.05x3.05
1.20x1.20 1.20x1.20
Balcony
Balcony
Kitchen Kitchen
3.05x1.935
A2 3.05x1.935
A1 Duct Duct
Liv/Din Liv/Din
Bed 3.43x5.645 3.43x5.645 Bed
3.05x3.05 3.05x3.05
W/R W/R
A3 4.19x1.20 Lift
1.98x1.75
Liv/Din
5.18x2.82
W.C.
1.20x1.20
Lobby
Bath 3.81x2.07
1.30x1.41 Duct
1.20x.95 DN UP
Bed Bed
3.05x3.05 2.44x3.05 Kitchen
3.54x2.13
Cantilevered
W/R W/R
Balcony Balcony
Polyline
Color
Number 35
Page 75 of 110
Description Layer
Corridor for residential building shall be drawn as polyline in the Color No. In all the floors
31. The width shall be the inner space between the walls. wherever
applicable.
Corridor for Commercial or Institutional building shall be drawn as

polyline in the Color No. 51. The width shall be the inner space
between the walls.
CORRIDOR (RESIDENTIAL AND Corridor

COMMERCIAL or EDUCATIONAL) Polyline
Color
Corridor(Residential) Number 31
HALL W1
OTS LIFT
M.D
W W 19'101 2 "X11'6"
W M.D KITCHEN 5'3"X4'9"
V
W
Corridor
TOILET
M.D M.D
5'X8' OTS
OTS V
V V W
D2 W1 W1
HALL HALL TOILET
11'31 2"X16'4" 11'3"X16'4" 5'X8' W
D1 D2
BED ROOM
KITCHEN KITCHEN BED ROOM
12'81 2 "X10'31 2 " D1 D1
8'6"X7'4" 8'6"X7'4" 11'41 2 "X10'31 2 "
D1 D1
D2 D2
DINING V DINING
W 6'6"X10' V 6'6"X10' W
F/D UTILITY UTILITY F/D
D2 BED ROOM D2
1 "
11'6"X10'32 V BED ROOM
BALCONY D2 D2 BALCONY BALCONY D2 1 " D2 BALCONY
V 11'6"X10'32
C.TOILET
C.TOILET
BALCONY 4'101 2 "X7'0" W BALCONY
W 4'101 2"X7'
V
Corridor
FLOOR PLAN
Polyline
Color
Corridor(Commercial or Educational) Number 51
W W
OTS
M.D
W M.D M.D D1
V
W
Corridor
TOILET
5'X8'
D2
Office Office
D2 D2
W
F/D
V W Corridor
D2
D2 D2 V Polyline
W
W
Color
FLOOR PLAN V
Number 51
Page 76 of 110
FSI Area of the Hospital building shall be drawn as polyline in the Color In all the floors
No. 110 and Hospital Beds space in ward shall be drawn as polyline & wherever
No. of beds text in the Color No. 190 applicable.
Corridor for Hospital building shall be drawn as polyline in the Color No.
243. The width shall be the inner space between the walls.
HOSPITAL
FSI(Hospital) Corridor
Polyline Polyline
Color Color
W W
OTS
W
M.D M.D
V
W
Corridor
TOILET
5'X8'
D2 General ward OTS
W
BED SPACE - 15 UP
entrance looby
D2 D2
W V W
F/D
D2 D2
D2 D2 V D2
W
W
V
FLOOR PLAN
Beds Space for Hospital

Polyline & Text
Color
Number 190
Page 77 of 110
Description Layer
FSI area for a Hotel building shall be drawn as polyline in the Color No. 122. In all the floors
wherever
Hotel rooms boundary shall be drawn as polyline in the Color No. 32 . applicable.
The hotel rooms and numbers as text shall be completely enclosed in
the hotel room polyline boundary.
OTS shall be drawn as polyline in the Color No. 11 for Deduction.
Duct shall be drawn as polyline in Color No. 3 for Deduction.
FSI (HOTEL) AND HOTEL ROOMS BOUNDARY
DUCT DUCT
OTS
BALCONY
BALCONY
ROOM - 6
ROOM - 6
ROOM - 5 OTS
ROOM - 5
Polyline
CORRIDOR
DUCT DUCT
Hotel Rooms Color

BALCONY
BALCONY
ROOM - 7 ROOM - 4
ROOM - 7 ROOM - 4 Number 11
Polyline
Color
DUCT DUCT
ROOM - 3 Duct
BALCONY
BALCONY
ROOM - 8 ROOM - 3
Number 32 ROOM - 8 Polyline

DUCT DUCT Color
BALCONY
BALCONY
ROOM - 9 ROOM - 2
Number 3
ROOM - 9 ROOM - 2
Rooms Text
Text
DUCT
BALCONY
Color
ROOM - 1
ROOM - 1 Balcony
CORRIDOR
CAFETERIA
Number 32
Polyline
LOOBY
Color
UP
Number 35
DN
LIFT
LIFT
COFFEE SHOP
Hotel FSI
L.TOI.
Polyline
Color
Number 122
Reception
G.TOI.
ED
Page 78 of 110
Description Layer
Residential FSI polyline for LIG (EWS) Blocks shall be drawn as polyline in the Color In all the floors
No. 15. wherever
applicable.
The deduction as polyline in the Color No. 3
LIG (EWS) FSI
balcony balcony
Bath Bath
W.C.
W.C.
1.20x1.20
Bed 1.20x1.20 Bed

3.05x3.05 3.05x3.05
Kitchen Kitchen
3.05x1.935 3.05x1.935
3.05x1.935 3.05x1.935
Kitchen Kitchen
3.05x3.05 3.05x3.05
1.20x1.20
1.20x1.20
Bed Bed
W.C.
W.C.
Bath Bath
balcony LIG FSI balcony
Deduction Boundary
Polyline Polyline
Color Color
Number 3 Number 15
Page 79 of 110
Description Layer
Residential FSI polyline for LIG (EWS) Dwelling Unit shall be drawn as polyline in the In all the floors
Color No. 211 wherever
applicable.
The deduction as polyline in the Color No. 3
Duct LIG (EWS) DWELLING UNIT

Text Name of
Color Dwelling Unit
Number 3 Text
Color
balcony Number 211 balcony
Bath Bath
W.C.
W.C.
1.20x1.20
1.20x1.20
Bed Bed
3.05x3.05 3.05x3.05
01 02
Kitchen Kitchen
3.05x1.935 3.05x1.935
3.05x1.935 3.05x1.935
Kitchen Kitchen
03 04
3.05x3.05 3.05x3.05
1.20x1.20
1.20x1.20
Bed Bed
W.C.
W.C.
Bath Bath
balcony balcony
LIG (EWS)
Kitchen text
Dwelling units
Text
Color POLYLINE
Number 211 Color

Number 211
Page 80 of 110
Description Layer
For Commercial building, FSI area shall be clearly marked with a polyline In all the floors
in the Color No. 6 and the Text shall be completely enclosed inside the wherever
polyline boundary. The text shall be strictly one from the Commercial applicable.
Building Use text. Otherwise software will mark the text as wrong.
FSI (COMMERCIAL)
FSI
(Commercial)
Polyline and Text
Color
Number 6
W W
OTS
M.D
W
M.D M.D D1
V
W
Corridor
TOILET
5'X8'
D2
Office
D2 D2
W V W
F/D
D2
D2 D2 V
W
W
V
FLOOR PLAN
Page 81 of 110
Description Layer
For Commercial buildings like Auditorium, kalyana mandapam and cinema halls, the In all the floors
seating area shall be clearly marked with a polyline in the Color No. 106 wherever
applicable.
The deductions shall be drawn as polylines in the Color No. 3.
SEATING AREA FOR AUDITORIUM, KALYANA MANDAPAMS

AND CINEMA HALLS
FSI
Polyline & Text
Color
Number 6
KALYANA MANDAPAM
SEATING AREA
Polyline
Color
Number 106
FSI
Deduction
Polyline
Color
Number 3
FLOOR PLAN
Page 82 of 110
Description Layer
FLOOR-GROUND,FLOOR01,FLOOR02,
For Commercial buildings multi level parking lots shall be drawn as polyline in the
FLOOR03,FLOOR04-TYPICAL
Color no. 6.
MULTI LEVEL PARKING LOTS

0.2000
3.8000
1.2800
1.4000
2.8000
2.8000
2.8000
2.8000
2.8000
2.8000
2.8000
28.1000
2.8000
25.3800
2.8000
MULTI LEVEL PARKING LOTS
2.8000
2.8000
2.8000
2.8000
2.8000
2.8000
2.8000
1.4000
0.3000 0.3000
SECTION
FLOOR-GROUND,FLOOR01,FLOOR02,FLOOR03,FLOOR04-TYPICAL
FLOOR PLAN
FSI
ELEVATION
Polyline & Text
Color
Number 6
Page 83 of 110
Description Layer
Building blocks shall be distinguished from each other in case Group FLOOR-STILT
Developments. Distinguishing of blocks shall be done by drawing (or)
polylines in the Color No. 50 along with individual text in the same FLOOR-GROUND
Color for identifying block names such as Block-A, Block-B etc.
Individual floor plans shall be drawn completely within the Color No.
50 rectangle.
DISTINGUISHING BLOCKS
FLOOR - GROUND FLOOR01

FLOOR - GROUND
BLOCK-A BLOCK-B
Distinguishing Blocks
Polyline and Text
Color
Number 50
BLOCK-A
BLOCK-B
Page 84 of 110
Solar energy
FLOOR-TERRACE
95
capture
Polyline
Layer
Number
Color
SOLAR PANEL FOR SOLAR PANEL FOR SOLAR PANEL FOR

HEATING SYSTEM HEATING SYSTEM HEATING SYSTEM
Solar energy capture for Hotels, Lodges etc. shall be drawn as polylines in Color No.
SOLAR ENERGY CAPTURE
TERRACE FLOOR PLAN
Page 85 of 110
OPEN TERRACE
OPEN TERRACE
Description
LIFT ACHINE
ROO A O E
LIFT ACHINE
ROO A O E
LIFT LIFT
WIDTH -1220
TREAD - 305
UP RISER - 150
SCIENTIFICALLY CLOSED
HER ATICALLY SEALED
CAPACITY 21000 LITS DN
SI E-2 0 355 1200 HT UP
O ER HEAD TAN OF INNER
SERVICE
LIFT
95.
Description Layer
Habitation rooms shall be drawn as rectangular polylines in Color No. 23. In all the floors
wherever
applicable.
HABITATION ROOMS
BATH
1385X1740
BED ROOM
4085X2455
D
D
BED ROOM
4640X2850
D1
STORE
FLOOR PLAN Habitation Room

Polyline
Color
Number 23
Page 86 of 110
Description Layer
Windows for Habitation room shall be drawn as Polyline in the Color No. In all the floors
103. The size of the rectangle shall be equal to the size of the actual wherever
window. applicable.
WINDOWS FOR HABITATION ROOM AREA
BATH
1385X1740
BED ROOM
D 4085X2455
D
BED ROOM
4640X2850
D1
STORE
FLOOR PLAN Windows for

Habitation Room
Polyline
Color
Number 103
Page 87 of 110
Description Layer
Toilet room shall be drawn as Polyline in the Color No. 81. In all the floors
wherever
applicable.
Water closet room shall be drawn as polyline in the Color No. 80
Bath room shall be drawn as polyline in the Color No. 83.
TOILET, BATH AND WATER CLOSET Bath

Polyline
Color
Number 83
W W
SERVICE VERANDAH

FD
D1 W2
D D
BATH V
LIVING & DINING
V
TOILET O
KITCHEN W1
FOYER
D
MD D1 V
Toilet WC
Polyline BED ROOM-2
Color
Number 81 W1 Water Closet
Polyline
Color
Number 80
Page 88 of 110
Description Layer
Ventilator for Toilet, Bath and Water closet shall be drawn as Polyline in In all the floors
the Color No. 102. The size of the rectangle shall be equal to the size of wherever
the actual window or ventilator. applicable.
TOILET, BATH & WATER CLOSET VENTILATOR
W W
SERVICE VERANDAH

FD
D1 W2
D D
BATH V
LIVING & DINING
V TOILET O
KITCHEN W1
FOYER
D
MD D1 V
WC
BED ROOM-2
Ventilation for
W1
Habitation
Room
Polyline
Color
Number 102
Page 89 of 110
Description Layer
Mechanical ventilation shall be drawn as Polyline in the Color No. 104. In all the floors
wherever
applicable.
MECHANICAL VENTILATION
Mechanical
Ventilation
Polyline
Color
Number 104
W
SERVICE VERANDAH A/C

FD
W2
D1
D D
D1
TOILET
V
O
LIVING & DINING TOILET V
KITCHEN
W1
FOYER
D
D1 MD
V TOILET
BED ROOM-2
W1
Page 90 of 110
Description Layer
Front setback line shall be drawn as line in the Color No. 4, if the proposal faces FLOOR-STILT
two or more roads, then the Front setback is taken from the road with the (or)
maximum width. All Setback lines are drawn exactly on the super imposed plot FLOOR-GROUND
polyline.
Side 1 setback shall be drawn as line in Color No. 6.
Side 2 setback shall be drawn as line in Color No. 2
Rear setback shall be drawn as line in Color No. 3.
SETBACK
Rear Setback
Line
Color
Number 3
Side2 Setback
Side1 Setback
Line
Line
Color
Color
Number 2
Number 6 SETBACK DETAILS
Road
Front Setback
Line
Color
Number 4
Page 91 of 110
Description Layer
Stilt Floor Height shall be drawn as line in the Color No. 21. FLOOR-STILT
STILT FLOOR HEIGHT
Staircase Head Room
Parapet
Second Floor
Stilt Floor First Floor

Height
Line
Color
Number 21
Stilt Floor
GL GL
SECTION
Page 92 of 110
Description Layer
Height of the building is the height measured generally from the formed FLOOR-STILT
ground level abutting the road to the roof level of the topmost floor. (or)
Architectural features and parapet walls up to one metre shall not be FLOOR-GROUND
included in calculating the height of the building. It shall be drawn as line
in the Color No. 151.
HEIGHT OF THE BUILDING

Height of the
Building
Line
Color
Number 151
Parapet Wall
Liv / Din Kitchen
Liv / Din Kitchen
Gym Electrical meter room
G.L G.L
SECTION
Page 93 of 110
Description Layer
Basement floor clear height is the distance measured between the bottom FLOOR-BFx
of the basement floor and roof of the same basement floor level. It shall where 'x' is the
be drawn as line in the Color No. 123. If there is more than one basement basement floor
floor, its height shall be given in the corresponding basement floor layer. number.
BASEMENT FLOOR CLEAR HEIGHT
Parapet
Basement
Ground Floor
Floor
Height
Line
Color
Number 123
GL
Basement 1
Basement 2
SECTION
Page 94 of 110
Description Layer
Basement floor height above ground level is the distance FLOOR-GROUND

measured between the roof of the upper most basement floor and
formed Ground level. It shall be given as line in the Color No. 105.
BASEMENT FLOOR HEIGHT

ABOVE GROUND LEVEL
Parapet
First Floor
Basement
Floor Height
Ground Floor
Above GL
Line
Color
Number 105
GL
Basement Floor
SECTION
Page 95 of 110
Description Layer
Electrical transformer room height shall be drawn as a line in the Color FLOOR-STILT
No. 160 (or)
FLOOR-GROUND
ELECTRICAL TRANSFORMER ROOM CLEAR HEIGHT
Electrical
Transformer
Room Height L.M.R
Water Tank
Line
Color
Number 160 Parapet Wall
Staircase Head Room
Liv/Din Kitchen
Bal.
Liv/Din Kitchen
Bal.
ELECTRICAL Letterboxes Lumber Room

TRANSFORMER ROOM
G.L. G.L.
SECTION
Page 96 of 110
Description Layer
Entry and Exit gates shall be drawn as lines in the Color No. 161. FLOOR-STILT
(or)
FLOOR-GROUND
Road Width shall be drawn as line in the Color No. 41 and Scale should
be 1:1.
ENTRY AND EXIT GATES & ROAD WIDTH

Road Width
Line
Color
Number 41
EXIT
D4
12.00 M
WIDE R
MDW
WATER CLOSET
OAD
D4
ENTRY
Entry and
Exit Gate
Line
Color
Number 161 SITE CUM STILT FLOOR PLAN
Page 97 of 110
Description Layer
Room Clear height shall be drawn as line in the Color No. 210. In all the floors
wherever
Kitchen Room Clear height shall be drawn as line in the Color No. 25. applicable.
Head Room Clear height shall be drawn as line in the Color No. 211.
Toilet Height shall be drawn as line in the Color No. 100.
HEAD ROOM, KITCHEN ROOM, ROOM CLEAR HEIGHT

Head Room AND TOILET HEIGHT
Height Kitchen Room
Line LIGHTNING ARRESTOR Clear Height
Color Line
L.M.R
Number 211 Water Tank Color
Number 25
Parapet Wall
Staircase Head Room
Liv/Din Kitchen
Liv/Din Kitchen
Room Clear Gym Electrical meter room
Height Toilet Height

Line Line
Color Color
G.L G.L
SECTION
Page 98 of 110
Description Layer
Mezzanine Floor Height shall be drawn as line in the Color No. 23. FLOOR-
MFstartfloorTOendfloor
MEZZANINE FLOOR HEIGHT
BANQUET HALL BELOW

16.86. x 22.75
LIFT
STAIR
RESTAURANT
11.20. x 16.86
LIFT
Mezzanine Floor MEZZANINE FLOOR PLAN

Height
Line
Color
Number 23
A/C BAR
RESTAURANT
COFFEE SHOP BANQUET HALL
Page 99 of 110
Description Layer
Main Door width shall be drawn as line in the Color No. 84. In all the floors
wherever
applicable.
Habitation room Door width shall be drawn as line in the Color No. 22.
MAIN DOOR & HABITATION ROOM DOOR WIDTH
W W
SERVICE VERANDAH

FD
D D
D1
D1 BATH V
LIVING & DINING
V TOILET O
W1
KITCHEN
FOYER
D
MD D1
V
WC
BED ROOM-2
Main Habitation room
W1
Door width Door width
Line Line
Color Color
Number 84 Number 22
Page 100 of 110

Description Layer
Non Habitation room Door width shall be drawn as line in the Color No. In all the floors
82. wherever
applicable.
NON HABITATION ROOM DOOR WIDTH

W W
SERVICE VERANDAH

FD
D D
D1
D1 BATH V
LIVING & DINING
V TOILET O
W1
KITCHEN
FOYER
D
MD D1
V
WC
BED ROOM-2 Non

W1 Habitation Room
Door width
Line
Color
Number 82
Page 101 of 110

Description Layer
Staircase width shall be drawn as line in the Color No. 191. All staircase In all the floors
lines shall be drawn in 1:1 scale. wherever
applicable.
Handrail Height shall be drawn as line in the Color No. 193.
Stair Tread shall be drawn as line in the Color No. 190.
Stair Riser shall be drawn as line in the Color No. 192.
STAIRCASE WIDTH, TREAD, RISER AND HANDRAIL
MD
Dn
Up
MD
FLOOR PLAN Staircase

width
Tread Line
Color
Line
Number 191
Color
Number 190
Riser
Handrail Line
Line Color
Color Number 192
Number 193
STAIRCASE SECTION
Page 102 of 110

Description Layer
Staircase Access Distance shall be drawn as open polyline in the Color In all the floors
No. 194. for Individual dwelling units. It is the distance between the main wherever
door of the dwelling unit and the nearest stair case. applicable.
STAIRCASE ACCESS DISTANCE
Liv/Din Liv/Din
A.H.U
Lift
1.98x1.75
Liv/Din
W.C.
Lobby
Bath Duct
DN UP
Bed
Kitchen
W/R
Bal.
Staircase
Access
Distance
Open Polyline
Color
Number 194
Page 103 of 110

Description Layer
FSI area for an Institutional building shall be drawn as polyline using the In all the floors
colour No. 33. wherever
Deductions such as OTS (in Color No. 11), Duct (in Color No. 3) within applicable.
FSI shall be drawn as polylines.
Rooms shall be drawn as polyline in Color No. 23. Class room text
is compulsory (only for class rooms) should be provided for school
buildings.
Stair Mid Landing shall be drawn as polyline in the Color No. 172.
Wall width shall be drawn as line in the Color No. 73.
FSI (INSTITUTIONAL)
Mid Landing Class Room FSI (INSTITUTIONAL)
Polyline Polyline and Text
Polyline and Text
Color Color
Color
Number 33
D2
D2
D2
CLASS ROOM1 CLASS ROOM2

D2
PRIVATE SCHOOL
OTS Duct
A
Polyline Polyline
Color Color
Number 11 Number 3
DETAIL - A
Wall width
Line
Color
Number 73
Page 104 of 110

Description Layer
FSI area for Industrial building shall be drawn as polyline using the Colour In all the floors
No. 134. wherever
applicable.
Deduction such as OTS (in Color No. 11), Ducts (in Color No. 3) within
FSI shall be drawn as polyline.
FSI (INDUSTRIAL)
FSI (Industrial) OTS Deduction

Polyline and Text Polyline Polyline
Color Color Color
Number 134 Number 11 Number 3
FACTORY
GROUND FLOOR PLAN
Page 105 of 110

Description Layer
FSI area for Industrial Office Area building shall be drawn as polyline In all the floors
using the Colour No. 134. wherever
applicable.
Deduction such as OTS (in Color No. 11), Ducts (in Color No. 3) within
FSI shall be drawn as polyline.
FSI (INDUSTRIAL OFFICE AREA)
FSI (Industrial) OTS Deduction

Polyline and Text Polyline Polyline
Color Color Color
Number 134 Number 11 Number 3
INDUSTRIAL-OFFICE
GROUND FLOOR PLAN
Page 106 of 110

Description Layer
Parapet wall height shall be drawn as a line in the Color No. 17. FLOOR-STILT
Applicable for Schools only (or)
FLOOR-GROUND
Parapet wall width shall be drawn as a line in the Color No. 71.
Applicable for Schools only
Class Room Height shall be drawn as a line in the Color No. 98. In all the floors
Applicable for Schools only wherever
applicable.
PARAPET WALL HEIGHT AND WIDTH
Parapet wall Height of the Height of the

width Parapet wall Class Room
Line
Line Line
Color
Color Color
Parapet
Number 71
Number 17 Number 98 Wall
F.G.L.
G.L.
Page 107 of 110

Description Layer
Total height of the building is the height measured from the formed FLOOR-STILT
ground level along with the staircase head room, lift rooms water tanks, (or)
WC above topmost floor, lightning arrestor, architectural features and FLOOR-GROUND
parapet walls. The top most height will be taken as total height of the
building. it shall be drawn as line in the colour No. 233.
TOTAL HEIGHT OF THE BUILDING
Total Height of the Building

Line
Color
Number 233
LIGHTNING ARRESTOR
L.M.R
Water Tank
Parapet Wall
Staircase Head Room
Liv/Din Kitchen
Liv/Din Kitchen
G.L G.L
SECTION
Page 108 of 110

Description Layer
Cycle Space (Area) shall be drawn as Polyline in Color No. 100. FLOOR-GROUND
(or)
FLOOR-STILT
(or)
FLOOR-BF
CYCLE SPACE (AREA)
CYCLE SPACE (Area)

Polyline
Color
Number 100
EXIT
12.00 M
D4
WIDE R
OAD
MDW
NING LINE
WATER CLOSET
D4
ROAD WIDE
ENTRY
Page 109 of 110

Description Layer
Outermost Plotting Boundary shall be drawn as Polyline in the Color FLOOR-STILT

No. 64. (or)
FLOOR-GROUND
OUTERMOST PLOTTING BOUNDARY

Outer most
Plotting Boundary
Line
Color
Number 64
PLAN SHOWING THE ADDITIONAL PROPOSED CONSTRUCTION OF A DWELLING HOUSE IN S.NO: 229/5, BLOCK NO : 8, AT
BOOBALASAMUTHIRAM VILLAGE IN PETHANADARPATTI PANCHAYAT AND KEELAPAVOOR UNION .

R.C.C. COLUMN
PARAPET WALL
300 X 500MM
R.C.C. 1:2:4.
FIRST FLOOR
PLINTH BEAM
230 X 325 MM
1.5439 1.4577 ROOF IN R.C.C 1:2:4
LINTEL CUM SUNSHADE

R.C.C COVER SLAB.
GROUND FLOOR (HERMATICALLY SEALED)
BRICK WORK IN CM 1:5
MAN HOLE 0.60 X 0.60
G.L G.L
FLOORING IN P.C.C 1:4:8 GL.
G.L G.L G.L SAND FILLING C.M 1:4, PLASTERED
P.C.C. 1:5:10
BRICK WORK WITH
RR WORK IN CM 1:8 SAND FILLING. WITH C.M 1:3 MIXED
P.C.C 1:4:8
2.75 X 2.75 Sq WITH WATER PROOF
MATERIAL.
ELEVATION SECTION ON AA P.C.C. 1:4:8
RCC Wall
SAND FILLING
P.C.C. 1:4:8
v
v 1 1
BATH
W W/C
TOILET v
W
TOILET v
SERVICE W
ROOM
BED ROOM
HALL BED ROOM

W BED ROOM W HALL
W
DINNING DINNING
W BED ROOM
W
KITCHEN W BED ROOM
A1
W W
W
KITCHEN
A2 WATER FROM BATH ROOM
IN LET TO SULLAGE O.H.T
OUT LET
GROUND PLAN FIRST PLAN SCIENTIFICALLY CLOSED R.C.C COVER
SLAB WITH INSPECTION COVER
OWN LAND
12.65 m
P.C.C 1:4:8
BRICK WORK
SAND
RING BEAM
RAIN WATER
HARVESTING
0.23 tk. BRICK WORK

1.50
WITH C.M. 1:6.

COMMON PATH
0.5715 G.L.
0.23
0.76
P.C.C 1:4:8
29.30 m
RAMESH LAND
SAND FILLING
0.15
0.46 0.23 DWARF WALL 7.5CM HIGHT

0.69
26.90 m
0.2858 SEPTIC TANK
COMPOUND WALL 230 TK.
1'1.5" TK. WALL

PEBBLE BEDROOM USING
50 TO 75mm SIZE
PEBBLE STONES
G.L. SLOPE 1 IN 20
EAST - WEST STREET INSIDE

13.65 m
SITE PLAN
Page 110 of 110

EDCR Manual PDF

Uploaded by

Copyright:

Available Formats

EDCR Manual PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

EDCR Manual PDF

Uploaded by

Copyright:

Available Formats

User Manual - Version 1.

Department of Town & Country Planning

“eDCR” SOFTWARE DEVELOPED

S. No. Description Page

2. PROMINENT PROCESS OF THE SOFTWARE 3

2.1 ONLINE BUILDING PLAN APPLICATION SCRUTINY PROCESS 3

2.2 PRECHECK SOFTWARE 3

2.3 “eDCR” SCRUTINY PROCESS 4

4. SCOPE OF THE SYSTEM 4

5. DRAWING FILES SPECIFICATIONS 5

5.1 LAYERS (LAYER NAMES) TO BE FOLLOWED 5

5.2 THE DRAWING SHOULD HAVE THE FOLLOWING SPECIFICATIONS 5

6. PROCEDURE TO CREATE A DRAWING 6

6.1 PARAMETERS TO BE DRAWN USING LINE OBJECTS 6

6.2 PARAMETERS TO BE DRAWN USING POLYLINE OBJECTS 7

6.3 PARAMETERS TO BE DRAWN USING TEXT OBJECTS 8

7. DETAILS OF COLOUR CODE FORMAT 9

8 FSI PARAMETERS FOR INCIDENTAL STRUCTURES 27

9. NON FSI PARAMETERS 28

10. NON FSI TEXT 28

11. COMMERCIAL BUILDING USE TEXT ORDERED AS PER CATEGORY 28

12. HOW TO SUBMIT THE DRAWING 31

12.1 REGISTRATION PROCESS 31

12.2 LOGIN PROCESS 32

12.3 PLAN SUBMISSION PROCESS 33

12.4 REFERENCE NUMBER DETAILS 41

13. ANNEXURE PARAMETERS SNAPSHOT 42

2.0 PROMINENT PROCESS OF THE SOFTWARE

2.1 ONLINE BUILDING PLAN APPLICATION SCRUTINY PROCESS

2.2 PRECHECK SOFTWARE

2.3 "eDCR" SCRUTINY PROCESS

4.0 SCOPE OF THE SYSTEM

5.0 DRAWING FILE SPECIFICATIONS

5.1 LAYERS (LAYER NAMES) TO BE FOLLOWED

 Floor layer – Floor01, Floor02, etc…. corresponding to the floor count.

 For Stilt Floor, layer should be Floor-Stilt.

 For multi level parking, layer should be Floor-MP1, Floor-MP2 etc.

 Don’t use unnecessary spaces in the layer creation.

Example: Do’s - Floor01, Floor-BF1 etc….

5.2 THE DRAWING SHOULD HAVE THE FOLLOWING SPECIFICATIONS

 Proposal Drawing should be in .DWG Format.

DRAWINGS WITH EXISTING BUILDING

6.0 PROCEDURE TO CREATE DRAWING

6.1 PARAMETERS TO BE DRAWN USING LINE OBJECTS

1. Front Set back

14. Mezzanine Floor Height

1. Super Imposed Site Boundary

23. Two Wheeler Parking Stall Size

6.3 PARAMETERS TO BE DRAWN USING TEXT OBJECTS

1. Non FSI Area as per DR (as prescribed in the Annexure)

7.0 DETAILS OF COLOR CODE FORMAT

7.0 DETAILS OF COLOR CODE FORMAT

7. Kitchen Area 25 Polyline Applicable floor layer*

Physically Challenged Ramp FLOOR-STILT / FLOOR-

56. Kitchen Height 25 Line Applicable floor layer*

67. Toilet Height 81 Line Applicable floor layer*

Floor Naming and Typical Text

80. Kitchen without store 25 Text Applicable floor layer*

*Applicable floor layer refers to the corresponding relevant floor level.