Properties of MI Cable

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Properties and Advantages of Mineral Insulated Cables - Isomil Page 1 of 2

ISOMIL - Mineral Insulated Cables

Properties and Advantages of Mineral Insulated Cables

At room temperature and up to the more common application temperatures mineral


powder insulates so well that the sheath can be considered to be entirely separated
from the inner conductor. Consequently, there are no adverse effects if the
conductor touches other metal parts of the equipment or is connected to them.

Long Life
The construction of the cable guarantees a long conductor life and thus the function
of the conductor because the sheath and the insulating powder protect the
conductors (cores) against environmental conditions such as corrosion or scaling.

Easy Installation
The cables are pliable, easy to handle and can be installed easily in a limited space
or in locations where access is difficult. No additional insulation is required.

Mechanical Strength
The compact construction with densely packed mineral powder and the robust
metal sheath ensure the position of the conductors in the compound and thus the
function of the cable even when exposed to mechanical stresses such as bending,
twisting or flattening. The cable can also be used in pressure or vacuum equipment.

Safety
Since the insulation is attained exclusively from powders on a mineral base the
cables are fire-proof and can thus be exposed to considerably higher temperatures
than cables with synthetic sheaths (e.g. PVC, teflon or textile fibres etc.).

Rapid Response
The high density of the mineral powder effects rapid transmission of heat between
conductor and sheath: This factor makes the cable highly suitable for temperature
measurement and control techniques.

Dielectric Strength
Despite its small size the compact construction allows an amazingly high dielectric
strength conductor/conductor or conductor/sheath, respectively, which means the
cables can be used in power supply systems at 220 V and above.

Radiation Resistance
The correct choice of component ensures radiation resistance making possible the
use of these cables in primary circuits as well as in the incore area, i.e. inside the
actual reactor core.

Corrosion and Scaling Resistance


The vast array of materials included in our standard programme and the possibility
to make materials to specification has put us in a position to supply suitable sheath
materials even for unfavourable environmental conditions in a corrosive
atmosphere and at high temperatures. Depending on the choice of component the
maximum application temperatures are between 500ºC and 1000ºC.

Long Lengths
Long lengths of cable can be obtained due to the initial measurements before
drawing and the production method.

Small Cable Diameter

http://www.isomil.de/en/mineral-insulated-thermocouple-properties.htm 10/11/2011
Properties and Advantages of Mineral Insulated Cables - Isomil Page 2 of 2

The relatively small diameter (compared with conventional cables) which is a result
of the construction has many advantages for both customer and construction
engineer.

Mil GmbH
Industriepark Hanau - Hall 4 • Ehrichstraße 10 • D-63450 Hanau
phone: +49 (0) 6181 931550 • [email protected] • www.isomil.de

http://www.isomil.de/en/mineral-insulated-thermocouple-properties.htm 10/11/2011

You might also like