Scribd Logo
Upload

Welcome to Scribd!

  • 420 views

    6.2.1.7 Packet Tracer - Configuring VLANs Instructions

    Uploaded by

    Kietumetse Tsimane

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    6.2.1.7 Packet Tracer - Configuring VLANs Instructions

    Uploaded by

    Kietumetse Tsimane
    420 views3 pages

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    420 views3 pages

    6.2.1.7 Packet Tracer - Configuring VLANs Instructions

    Uploaded by

    Kietumetse Tsimane

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3
    At a glance
    Powered by AI
    VLANs allow logical grouping of devices to simplify administration and management of network devices.

    Configuring VLANs will allow separation of network traffic between different user groups (e.g. students, faculty, guests) for improved security and management.

    The 'show vlan brief' command displays only the VLAN name, status, and associated ports on a switch.

    Packet Tracer – Configuring VLANs

    Topology

    Addressing Table

    Device Interface IP Address Subnet Mask VLAN

    PC1 NIC 172.17.10.21 255.255.255.0 10


    PC2 NIC 172.17.20.22 255.255.255.0 20
    PC3 NIC 172.17.30.23 255.255.255.0 30
    PC4 NIC 172.17.10.24 255.255.255.0 10
    PC5 NIC 172.17.20.25 255.255.255.0 20
    PC6 NIC 172.17.30.26 255.255.255.0 30

    Objectives
    Part 1: Verify the Default VLAN Configuration
    Part 2: Configure VLANs
    Part 3: Assign VLANs to Ports

    Background
    VLANs are helpful in the administration of logical groups, allowing members of a group to be easily moved,
    changed, or added. This activity focuses on creating and naming VLANs, and assigning access ports to
    specific VLANs.

    © 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 1 of 3
    Packet Tracer – Configuring VLANs

    Part 1: View the Default VLAN Configuration

    Step 1: Display the current VLANs.


    On S1, issue the command that displays all VLANs configured. By default, all interfaces are assigned to
    VLAN 1.

    Step 2: Verify connectivity between PCs on the same network.


    Notice that each PC can ping the other PC that shares the same network.
    • PC1 can ping PC4
    • PC2 can ping PC5
    • PC3 can ping PC6
    Pings to PCs in other networks fail.
    What benefit will configuring VLANs provide to the current configuration?

    Part 2: Configure VLANs

    Step 1: Create and name VLANs on S1.


    Create the following VLANs. Names are case-sensitive:
    • VLAN 10: Faculty/Staff
    • VLAN 20: Students
    • VLAN 30: Guest(Default)
    • VLAN 99: Management&Native
    • VLAN 150: VOICE

    Step 2: Verify the VLAN configuration.


    Which command will only display the VLAN name, status, and associated ports on a switch?

    Step 3: Create the VLANs on S2 and S3.


    Using the same commands from Step 1, create and name the same VLANs on S2 and S3.

    Step 4: Verify the VLAN configuration.

    Part 3: Assign VLANs to Ports

    Step 1: Assign VLANs to the active ports on S2.


    Configure the interfaces as access ports and assign the VLANs as follows:
    • VLAN 10: FastEthernet 0/11

    © 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 2 of 3
    Packet Tracer – Configuring VLANs

    • VLAN 20: FastEthernet 0/18


    • VLAN 30: FastEthernet 0/6

    Step 2: Assign VLANs to the active ports on S3.


    S3 uses the same VLAN access port assignments as S2. Configure the interfaces as access ports and assign
    the VLANs as follows:
    • VLAN 10: FastEthernet 0/11
    • VLAN 20: FastEthernet 0/18
    • VLAN 30: FastEthernet 0/6

    Step 3: Assign the VOICE VLAN to FastEthernet 0/11 on S3.


    As shown in the topology, the S3 FastEthernet 0/11 interface connects to a Cisco IP Phone and PC4. The IP
    phone contains an integrated three-port 10/100 switch. One port on the phone is labeled Switch and connects
    to F0/4. Another port on the phone is labeled PC and connects to PC4. The IP phone also has an internal port
    that connects to the IP phone functions.
    The S3 F0/11 interface must be configured to support user traffic to PC4 using VLAN 10 and voice traffic to
    the IP phone using VLAN 150. The interface must also enable QoS and trust the Class of Service (CoS)
    values assigned by the IP phone.

    Step 4: Verify loss of connectivity.


    Previously, PCs that shared the same network could ping each other successfully.
    Try pinging between PC1 and PC4. Although the access ports are assigned to the appropriate VLANs, were
    the pings successful? Why?

    What could be done to resolve this issue?

    Suggested Scoring Rubric

    Question Possible Earned


    Activity Section Location Points Points

    Part 1: Verify the Default VLAN Configuration Step 2 2


    Part 2: Configure VLANs Step 2 2
    Part 3: Assign VLANs to Ports Step 3 2
    Packet Tracer Score 94
    Total Score 100

    © 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 3 of 3

    You might also like