Prestone Command AFC Extended Serv 50 50 Data Sheet

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

HEAVY DUTY ANTIFREEZE/COOLANT

Prestone Command ®
Heavy Duty Prediluted 50/50
Antifreeze/Coolant
Prestone Command® Heavy Duty Prediluted 50/50
Antifreeze/Coolant is a blend of antifreeze/coolant and
demineralized water designed for use in ANY Heavy
Duty Engines used in normal to severe duty cycles
and extreme temperature conditions. This product
will provide complete protection against freezing,
overheating, cavitation erosion, corrosion, scale and
foaming with just an easy pour and does not require
SCAs in the initial fill. For flush and fill use Prestone
Command® Heavy Duty concentrate.

WITH EXTENDED SERVICE


INTERVAL TECHNOLOGY
SCA PRE-CHARGED
• Advanced corrosion protection technology
• For ANY heavy duty engine
• Compatible with ANY conventional heavy duty
coolants and ALL filter technologies

Specifications and Performance: Prestone Command®


Heavy Duty Prediluted 50/50 Antifreeze/Coolant meets
or exceeds performance requirements of the major
engine manufacturers and the following specifications:
TMC RP-329, ASTM D-6210, ASTM D-4985, ASTM
D-3306, SAE J1941

Stock # UPC Code Size


AFC10100 797496877697 1 gal.
AFC10100-55 797496877703 55 gal. drum
AFC10100-1KL 797496877741 264 gal.

Questions/Comments go to www.prestonecommand.com
or call (888) 282-8960. ® Property of Prestone Products Corporation
Reference recycle information from label. PRESTONE PRODUCTS CORPORATION, 1900 West Field Court, Lake Forest, IL 60045
©2013 Prestone Products Corporation
Made in U.S.A.
HEAVY DUTY ANTIFREEZE/COOLANT

PRESTONE COMMAND® HEAVY DUTY PREDILUTED 50/50 ANTIFREEZE/COOLANT

FEATURES & BENEFITS Properties Typical Values ASTM Tests


• Low Silicate Specific Gravity 1.075 D 1122
• Requires No Initial Supplemental Coolant Additive (SCA) at 60°F (16ºC)
• Very Low Dissolved Solids Boiling Point 227°F (108°C) D 1120
• State-of-the-Art Scale Preventing Additives Ash, Mass, % 0.3 D 1119
• No Phosphates Foam Test 65 ml/2 sec. D 1881
• Blended with Demineralized Water
pH 50/50 Vol. 10.4 D 1287
• Universal Formula: Heavy Duty and Industrial Applications Solution
APPLICATION Freeze Point, -34°F (-37ºC) D 1177
50/50 Solution
A 50/50 mix of Prestone Heavy Duty Antifreeze/Coolant will
®

assure proper freeze protection/boilover protection and insure Total Dissolved 0.3% Federal # 209B
the proper concentration level of inhibitor is being provided. Solids
There is no need to use an initial charge of supplemental coolant
additive or pre-charge spin on filter. Can be used with or without
controlled release filter technology. HANDLING
Keep container closed. In case of spill, clean up quickly as
- DO NOT ADD WATER - For flush and fill use Prestone Command® ESI
Concentrate product
product is slippery. Flush small spills with water. Large spills,
collect into drums for proper disposal. Dispose of or recycle
according to federal, state or local regulations.
GENERAL DESCRIPTION

Composition Typical Values DOSAGE


Total Water 49% For outstanding protection against freezing or boil-over use the
50/50 Prediluted Prestone® without further dilution. Concentration
Total Antifreeze 51% levels should not fall below 50% by volume.
Color Purple
Odor Not Offensive MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS
Pack/Unit Bulk/Drums/Gal. jugs OF THE FOLLOWING SPECIFICATIONS*
Fluid weight/unit 8.8 - 8.9 lb./gal. Heavy Duty Automobile
• ASTM D-4985 & D-6210 • ASTM D-3306
• Case Corp. MS1710 • ASTM D-4340
Freeze-Up Boilover Corrosion
Protection • Caterpillar Heavy Duty Coolant • Chrysler MS 7170
Protection Protection† Protection
• CID A-A-52624A Section A & B 1-4
Meets or • Cummins CES 90T8-4 • CSMA
Prestone
exceeds and 14603 • Ford ESE-M97B44-A
Command®
-34°F 265°F ASTM D3306, • Detroit Diesel 7SE298 and Section 3.1.1 & 3.1.2
HD
(-37°C) (129ºC) ASTM D4985 93K217 • GM 1825M and GM 6043M
Prediluted
and • EMD M.I.1748E • SAE J1034
50/50
ASTM D6210 • Ford New Holland 9-86
• Freightliner 48-22880 * For updated list of
† Using a 15 lb. pressure cap in good condition.
• GM 1899M and GM 6038M specifications, visit
• John Deere H24A1 & 8650-5 www.prestonecommand.com
• Kenworth R026-170-97
• Mack
• PACCAR
• Navistar B-1
• Peterbilt 07-06773
• SAE J1941
• Thermo-King
• TMC RP-302A & RP-329
Questions/Comments go to www.prestonecommand.com • Volvo GM
or call (888) 282-8960. • Waukesha 4-1974D
® Property of Prestone Products Corporation
Reference recycle information from label. PRESTONE PRODUCTS CORPORATION, 1900 West Field Court, Lake Forest, IL 60045
Made in U.S.A. ©2013 Prestone Products Corporation

PA1214-B

You might also like