Scribd Logo
Upload

Welcome to Scribd!

  • 103 views

    H.265 HDMI Video Encoder Quick Start Guide - ERV1.2

    Uploaded by

    Thompson Ighalo
    This document provides instructions for configuring an HDMI video encoder. It discusses preparing the encoder by downloading required software, setting the IP address either through a router or direct connection, and accessing the encoder's web interface through a browser. It then covers configuring wireless or 4G connections, checking system status, adjusting video/audio settings, adding on-screen displays, and setting the RTMP stream address. The goal is to enable live streaming or recording of the HDMI video source over the network.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    H.265 HDMI Video Encoder Quick Start Guide - ERV1.2

    Uploaded by

    Thompson Ighalo
    103 views13 pages
    This document provides instructions for configuring an HDMI video encoder. It discusses preparing the encoder by downloading required software, setting the IP address either through a router or direct connection, and accessing the encoder's web interface through a browser. It then covers configuring wireless or 4G connections, checking system status, adjusting video/audio settings, adding on-screen displays, and setting the RTMP stream address. The goal is to enable live streaming or recording of the HDMI video source over the network.

    Original Description:

    hdmi

    Original Title

    H.265 HDMI Video Encoder Quick Start Guide_ERV1.2

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for configuring an HDMI video encoder. It discusses preparing the encoder by downloading required software, setting the IP address either through a router or direct connection, and accessing the encoder's web interface through a browser. It then covers configuring wireless or 4G connections, checking system status, adjusting video/audio settings, adding on-screen displays, and setting the RTMP stream address. The goal is to enable live streaming or recording of the HDMI video source over the network.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    103 views13 pages

    H.265 HDMI Video Encoder Quick Start Guide - ERV1.2

    Uploaded by

    Thompson Ighalo
    This document provides instructions for configuring an HDMI video encoder. It discusses preparing the encoder by downloading required software, setting the IP address either through a router or direct connection, and accessing the encoder's web interface through a browser. It then covers configuring wireless or 4G connections, checking system status, adjusting video/audio settings, adding on-screen displays, and setting the RTMP stream address. The goal is to enable live streaming or recording of the HDMI video source over the network.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 13

    H.265/H.

    264
    HDMI Video Encoder
    Quick Star Guide
    Table of Contents
    1. Preparation........................................................................................................................... 4
    1.1 Download and Install ActiveX ................................................................................ 4
    1.2 Download and Install IPC Manager ..................................................................... 4
    1.3 Clear Cache ................................................................................................................ 4
    2. Two Methods to Configure IP Address of HDMI Video Encoder ............................ 4
    2.1 Power on with DC12V and connect it to the routers ....................................... 4
    2.2 Connect HDMI Video Encoder to PC directly (direct connection) ............ 5
    3. Access from a Browser ..................................................................................................... 6
    4. Configure Wireless Connection (Only available to Wireless Devices) ............... 7
    4.1 Connect to Wi-Fi ......................................................................................................... 7
    4.2 Reboot........................................................................................................................... 8
    5. Configure 4G Connection (Only available to 4G Devices) ................................... 8
    5.1 Connect to 4G ............................................................................................................ 8
    5.2 Reboot........................................................................................................................... 9
    6. Configure Encoder via IE & Chrome ............................................................................. 9
    6.1 Check System Status ................................................................................................. 9
    6.2 Configure System Mode........................................................................................... 9
    6.3 Configure Audio ....................................................................................................... 10
    6.4 Configure Video ....................................................................................................... 10
    6.5 Configure OSD .......................................................................................................... 11
    6.6 Configure RTMP address ........................................................................................ 12
    7. FAQ ....................................................................................................................................... 12
    8. Contact ............................................................................................................................... 13
    Preface

    Thanks for purchasing our products. The video encoder is mainly used for
    CCTV surveillance, IPTV live broadcast, WeMedia broadcast, major sports
    broadcast, remote teaching, tele-medicine, wedding ceremonies, video
    conference etc. It adopts high performance SOC which is capable of
    collection, compression and transmission of video and audio together.
    Integrated with H.265 video encoding algorithm, it can be better to
    transmit and save the videos by halving storage space and bandwidth.
    The embedded web server allows users to easily monitor and remotely
    control front-end video from browsers like IE, Microsoft Edge, Google
    Chrome, Firefox, Safari etc. If possible, it’s recommended to use Google
    Chrome directly.

    The tested streaming media servers include Tencent Cloud, Alibaba


    Cloud, Baidu Cloud, 163Yun, QINIU, AUDIANYUN, LE Cloud, MUDU.TV,
    Youtube and Wowza etc. It’s compatible with Hikvision’s NVR & CMS
    (iVMS-4200) and Dahua’s NVR & CMS (SmartPSS) by private protocols.
    Video protocols like TS stream, RTMP, HTTP, RTSP and ONVIF are all
    supported. It also supports AAC、G.711U and G.711A audio encoding.

    NOTE: This document might be changed and updated at any time


    without notice. If you have any questions, please contact us directly.
    1. Preparation
    1.1 Download and Install ActiveX
     Name of ActiveX: IPCOCX_setup2.15
     Download link as below:
    https://www.dropbox.com/s/f0447ye441o8fl0/ActiveX_IPC
    OCX_setup2.15.rar?dl=0

    1.2 Download and Install IPC Manager


     Name of IPC Manager:
    NEU_IPCManager_V4.02.28_win_x86
     Download link as below:
    https://www.dropbox.com/s/ks1c66x3dxjknqe/NEU_IPCMa
    nager_V4.02.28_win_x86.rar?dl=0
     Install IPC Manager
    NOTE: IPC Manager can only be used in Windows instead of
    MAC OS.

    1.3 Clear Cache


     Run IE>Tools>Internet Options
     Delete corresponding browsing history
     Click checkbox before “Every time I visit the webpage”

    2. Two Methods to Configure IP Address of HDMI Video Encoder


    2.1 Power on with DC12V and connect it to the routers
     Steps to obtain IP address by DHCP Server as below: Enter
    user name & password>Select All>DHCP>
    Modification>Refresh
    NOTE: please ensure the network camera and your PC are on
    the same segment if it’s connected to the same router.

    2.2 Connect HDMI Video Encoder to PC directly (direct connection)


     Set static IP address for PC

     Steps to obtain IP address by manual modification as


    below: Enter user name & password>Select All>Use The
    Following IP Address>Enter IP from/Subnet Mask/IP
    Gateway>Modification>Refresh
    3. Access from a Browser
    3.1 Start a browser (Internet Explorer, Chrome, Firefox, Safari).

    3.2 Enter the IP address or host name of the network camera or


    encoder in the browser’s Location/Address field.

    NOTE: The default IP address is 192.168.1.120. If you do not know


    the IP address, use IPCManager to locate the device in your
    network. For information about how to discover and assign an IP
    address, please see----

    3.3 Enter your user name and password. If this is the first time the
    product is accessed, it’s strongly recommended to set a new
    password.

    3.4 Click “Log In” and the Preview page opens in your browser.
    4. Configure Wireless Connection (Only available to Wireless Devices)
    4.1 Connect to Wi-Fi
     Click Settings>Network>WIFI
     Double click your wireless ID from the Wireless List
     Enter your password of WIFI in the column of Key
     Click Save to make the above settings valid

    NOTE: Check whether the device is connected to the WIFI


    from Settings>Network>WIFI>Wireless Status. If not connected
    yet, please try to re-configure the WIFI connection or reboot
    the device after your settings.
    4.2 Reboot
     Click Settings>System>Maintain>System Reboot

    `
    NOTE: it will take a little time to reboot, please wait for a while
    after clicking System reboot button.

    5. Configure 4G Connection (Only available to 4G Devices)


    5.1 Connect to 4G
     Click Settings>Network>4G
     Select True from the dropdown list to enable 4G
     Click Save and it will automatically dial

    NOTE: Check whether the device is connected to the 4G


    from Settings>Network>4G>Wireless Status. If not connected
    yet, please try to re-configure the 4G connection or reboot
    the device after your settings.
    5.2 Reboot

    Please see 4.2

    6. Configure Encoder via IE & Chrome

    NOTE: By IE, it’s necessary to clear cache, or else all settings might
    not be shown correctly on IE or browsers powered by IE kernel. For
    details to clear cache, please see 2.2.

    6.1 Check System Status


     Click Settings>System>System Status>Overview
     Check whether video & audio input by HDMI are correct?

    6.2 Configure System Mode


     Click Settings>System>System Status>System Settings
     Select the needed system mode from drop-down list
     Click Save and it will automatically reboot
    6.3 Configure Audio
     Click Settings>Video/Audio>Audio/Audio Config
     Select the corresponding Codec Type and Bitrate
     Click Save to make the above settings valid

    NOTE:
    a. Two types of coding for audio: AAC and G.711. Usually it’s
    recommended to use AAC if you’re trying to use
    streaming media server for live broadcast.
    b. Usually use G.711U and G.711A if it’s connected to NVR,
    audio sampling is 8000 by default.

    6.4 Configure Video


     Click Settings>Video/Audio>Video
     Configure Resolution/Key Interval/Bitrate
     Click Save to make the above settings valid
    NOTE: if there are many moving objects in the image, it’s
    strongly recommended to change the key interval with a
    smaller one like 5 or 10, then the image quality can be
    improved.

    6.5 Configure OSD


     Click Settings>Video/Audio>OSD
     Add Text OSD
    a. Select True from drop-down list to enable Test OSD
    b. Enter corresponding content to enable channel name
    c. Select True to enable Move to let contents move in
    from the left side of screen

     Add Picture OSD


    a. Select True from drop-down list to enable Picture OSD
    b. Click Browse to select the corresponding images
    c. Click Upload to upload the above selected images
     Click Save to make the above settings valid

    6.6 Configure RTMP address


     Click Settings>Network>RTMP>Enable
     Enter RTMP address in the column of Push URL
     Click Save to make the above settings valid

    NOTE: if there are two lines of push address, the format is push
    address and live streaming code together like rtmp://push
    address/live streaming code/

    7. FAQ
    7.1 How many languages can be supported by default for UI?
    A: two languages by default: Simplified Chinese and English.

    7.2 What is the main difference for main stream and sub stream?
    A: Main stream means higher resolution, primarily used for CCTV
    surveillance while sub stream means lower resolution for network
    transmission.

    7.3 Can live broadcast and surveillance be used simultaneously?


    A: Yes, RTMP protocol will be used for live streaming while RTSP
    for surveillance, so it won’t be affected when simultaneously
    used.
    7.4 Which kind of NVR can support live streaming and surveillance
    as well as sound?
    A: as far as we learned, only NVR from TP-Link can support AAC,
    while traditional manufacturers only support G.711, not AAC
    because of intellectual property. Besides, right now our encoder
    can be compatible with Hikvision’s NVR & CMS (iVMS-4200) and
    Dahua’s NVR & CMS (SmartPSS).

    7.5 Can we use H.265 encoding when pushing streams by RTMP?


    A: No, RTMP can only support H.264 encoding. And Adobe said
    clearly before there is no more update and maintenance for
    RTMP, that’s why RTMP and RTSP can only support H.264
    encoding.

    8. Contact

    Any question, please contact us directly through below ways:


     Tell: +86-18923798767 (WhatsApp)
     Skype: wyliu007
     Email: [email protected]

    You might also like