Scribd Logo
Upload

Welcome to Scribd!

  • 139 views

    Bend Allowance

    Uploaded by

    morohi
    This document provides a bend allowance chart with bend allowances for various sheet metal thicknesses and gauge sizes ranging from 8 gauge to 24 gauge bent at angles from 10 to 170 degrees. The chart includes the material thickness (MT) and inside radius (IR) dimensions for each gauge size and provides the recommended bend allowance, which is the amount the sheet metal should be made longer to allow for tightening of the bend.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd

    Bend Allowance

    Uploaded by

    morohi
    139 views2 pages
    This document provides a bend allowance chart with bend allowances for various sheet metal thicknesses and gauge sizes ranging from 8 gauge to 24 gauge bent at angles from 10 to 170 degrees. The chart includes the material thickness (MT) and inside radius (IR) dimensions for each gauge size and provides the recommended bend allowance, which is the amount the sheet metal should be made longer to allow for tightening of the bend.

    Original Title

    Bend-Allowance.xls

    Copyright

    © © All Rights Reserved

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides a bend allowance chart with bend allowances for various sheet metal thicknesses and gauge sizes ranging from 8 gauge to 24 gauge bent at angles from 10 to 170 degrees. The chart includes the material thickness (MT) and inside radius (IR) dimensions for each gauge size and provides the recommended bend allowance, which is the amount the sheet metal should be made longer to allow for tightening of the bend.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    139 views2 pages

    Bend Allowance

    Uploaded by

    morohi
    This document provides a bend allowance chart with bend allowances for various sheet metal thicknesses and gauge sizes ranging from 8 gauge to 24 gauge bent at angles from 10 to 170 degrees. The chart includes the material thickness (MT) and inside radius (IR) dimensions for each gauge size and provides the recommended bend allowance, which is the amount the sheet metal should be made longer to allow for tightening of the bend.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    of 2

    Bend Allowance Chart

    8 Gauge 10 Gauge 12 Gauge 14 Gauge 16 Gauge 18 Gauge 20 Gauge 22 Gauge 24 Gauge


    K factor 0.33 K factor 0.33 K factor 0.33 K factor 0.33 K factor 0.33 K factor 0.33 K factor 0.33 K factor 0.33 K factor 0.33

    MT IR MT IR MT IR MT IR MT IR MT IR MT IR MT IR MT IR

    0.163 0.210 0.135 0.164 0.105 0.118 0.075 0.105 0.060 0.092 0.048 0.066 0.036 0.020 0.030 0.020 0.024 0.020

    Angle Allowance Allowance Allowance Allowance Allowance Allowance Allowance Allowance Allowance
    10 0.0461 0.0364 0.0266 0.0226 0.0195 0.0143 0.0056 0.0052 0.0049

    15 0.0691 0.0546 0.0399 0.0339 0.0293 0.0214 0.0083 0.0078 0.0073

    20 0.0921 0.0727 0.0532 0.0453 0.0390 0.0285 0.0111 0.0104 0.0097

    25 0.1152 0.0909 0.0665 0.0566 0.0488 0.0357 0.0139 0.0130 0.0122

    30 0.1382 0.1091 0.0799 0.0679 0.0585 0.0428 0.0167 0.0156 0.0146

    35 0.1612 0.1273 0.0932 0.0792 0.0683 0.0500 0.0195 0.0182 0.0170

    40 0.1842 0.1455 0.1065 0.0905 0.0780 0.0571 0.0222 0.0209 0.0195

    45 0.2073 0.1637 0.1198 0.1018 0.0878 0.0642 0.0250 0.0235 0.0219

    50 0.2303 0.1818 0.1331 0.1131 0.0975 0.0714 0.0278 0.0261 0.0243

    55 0.2533 0.2000 0.1464 0.1245 0.1073 0.0785 0.0306 0.0287 0.0268

    60 0.2764 0.2182 0.1597 0.1358 0.1170 0.0856 0.0333 0.0313 0.0292

    65 0.2994 0.2364 0.1730 0.1471 0.1268 0.0928 0.0361 0.0339 0.0316

    70 0.3224 0.2546 0.1863 0.1584 0.1365 0.0999 0.0389 0.0365 0.0341

    75 0.3455 0.2728 0.1996 0.1697 0.1463 0.1070 0.0417 0.0391 0.0365

    80 0.3685 0.2910 0.2129 0.1810 0.1560 0.1142 0.0445 0.0417 0.0389

    85 0.3915 0.3091 0.2263 0.1923 0.1658 0.1213 0.0472 0.0443 0.0414

    90 0.4146 0.3273 0.2396 0.2036 0.1755 0.1284 0.0500 0.0469 0.0438

    95 0.4376 0.3455 0.2529 0.2150 0.1853 0.1356 0.0528 0.0495 0.0462

    100 0.4606 0.3637 0.2662 0.2263 0.1950 0.1427 0.0556 0.0521 0.0487

    105 0.4836 0.3819 0.2795 0.2376 0.2048 0.1499 0.0584 0.0547 0.0511

    110 0.5067 0.4001 0.2928 0.2489 0.2145 0.1570 0.0611 0.0573 0.0535

    115 0.5297 0.4182 0.3061 0.2602 0.2243 0.1641 0.0639 0.0599 0.0560

    120 0.5527 0.4364 0.3194 0.2715 0.2340 0.1713 0.0667 0.0626 0.0584

    125 0.5758 0.4546 0.3327 0.2828 0.2438 0.1784 0.0695 0.0652 0.0608

    130 0.5988 0.4728 0.3460 0.2942 0.2535 0.1855 0.0723 0.0678 0.0633

    135 0.6218 0.4910 0.3594 0.3055 0.2633 0.1927 0.0750 0.0704 0.0657

    140 0.6449 0.5092 0.3727 0.3168 0.2730 0.1998 0.0778 0.0730 0.0681

    145 0.6679 0.5274 0.3860 0.3281 0.2828 0.2069 0.0806 0.0756 0.0706

    150 0.6909 0.5455 0.3993 0.3394 0.2925 0.2141 0.0834 0.0782 0.0730

    155 0.7140 0.5637 0.4126 0.3507 0.3023 0.2212 0.0862 0.0808 0.0754

    160 0.7370 0.5819 0.4259 0.3620 0.3120 0.2283 0.0889 0.0834 0.0779

    165 0.7600 0.6001 0.4392 0.3734 0.3218 0.2355 0.0917 0.0860 0.0803
    Bend Allowance Chart
    170 0.7830 0.6183 0.4525 0.3847 0.3315 0.2426 0.0945 0.0886 0.0827

    You might also like