Plasson PVC Fittings PDF

Download as pdf or txt
Download as pdf or txt
You are on page 1of 64

PVC FITTINGS & VALVES

Technical Catalogue

Distributor of
INTRODUCTION

Plasson’s innovative products revolutionized the way of connecting polyethylene pipes in the 1960’s. We started with
fittings for agricultural irrigation and later developed products for urban water distribution.

High pressure PVC Fittings and Valves are part of Plasson’s wide range of products. Plasson has achieved superior
designs and products and a genuine commitment to quality, delivery and service.

Plasson continues to strive for the future environment. By buying Plasson products you help us invest in our vision of a
world where clean, pure water will be everyone’s birthright.

INTRODUCTION
CEMENTED FITTINGS 8-17

ADAPTOR FITTINGS 18-25

THREADED FITTINGS 26-32

FITTINGS ACCESSORIES 33-36

VALVES NORMAL SUPPORT 37-38

VALVES THREADED SUPPORT 39-43

CHECK VALVES 44-45

FOOT VALVES 46

AIR RELEASE VALVES 47

VALVES ACCESSORIES 48-52

TECHNICAL SPECIFICATIONS - FITTINGS 53-54

TECHNICAL SPECIFICATIONS - VALVES 55-56

ASSEMBLY INSTRUCTIONS 57-62

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


PRODUCT LIST

050100 054500
Socket - Cemented 45° Elbow - Cemented
page 8 page 14

050200 055000
Reducing Socket Flange Adaptor with
Male - Female - Cemented O-Ring Cemented
page 9 page 14

050400 055100
90° Tee - Cemented Stub Flat Face to fit
page 10 055000 Cemented
page 15

050500 055200
90° Elbow - Cemented Stub Serrated
page 10 Cemented
page 15

050700 059000
End Cap - Cemented Loose Flange
page 11 page 16

050800 059100
Union - Cemented Blind Flange
page 11 page 16

050900 059200
Short Reducing Fixed Flange
Bushing - Cemented page 17
page 12

051400 050102
90° Reducing Tee Socket Adaptor
Cemented Cemented Threaded
page 13 page 18

053600 050202
House Adaptor Reducer Adaptor
Cemented M - F - Cemented Threaded
page 13 page 18
3

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


PRODUCT LIST

050302 051402
Adaptor Socket 90° Reducing Tee
M - F - Cemented - Threaded Cemented - Threaded
page 18 page 21

050402 057102
90° Tee Socket Adaptor Cemented
Cemented Threaded Threaded with Reinforcing Ring
page 19 page 22

050502 057202
90° Elbow Reduder Adaptor with
Cemented Threaded Reinforcing Ring Male
Cemented - Female - Threaded
page 19
page 22

050602 057402
Adaptor 90° Tee with Reinforcing
M - F - Cemented - M - Threaded Ring Cemented Threaded
page 19 page 23

050802 057502
Union Adaptor 90° Elbow with Reinforcing
F - Cemented - Threaded Ring Cemented Threaded
page 20 page 23

052102 058900
Adaptor Metal Pipe & Tap
M - F - Cemented - M - Threaded Connectors
page 20 page 24

052202 058100
Bushing Adaptor Metal Pipe & Tap
M - F - Cemented - M - Threaded Connectors
page 20 page 24

053602 058200
House Adaptor Metal Pipe & Tap
With Threaded Nut Connectors
page 21 page 25

054502 058901
45° Elbow Metal Pipe & Tap
Cemented - Threaded Connectors
page 21 page 25
4

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


PRODUCT LIST

050101 050804
Socket - Threaded Union
page 26 Male - Female - Threaded
page 29

050103 051601
Socket - Threaded Reducing Nipple
Female - Female Threaded

page 26 page 30

050201 051701
Reducer Plug - Threaded
Male - Female - Threaded page 31
page 27

050401 053601
90° Tee - Threaded House Adaptor
page 27 Threaded
page 31

050501 052201
90° Elbow - Threaded Nipple Socket
page 28 Male - Female - Threaded
page 31

050601 054501
Nipple - Threaded 45° Elbow
page 28 Threaded
page 32

050701 059201
Cap - Threaded Fixed Flange
page 28 Threaded
page 32

050801 054800
Union Female Nut for Unions: 050800, 050801
Threaded 050802, 050803, 050804, 053602
page 29 page 33

050803 055800
Union Male - Female Bushimg for Union:
Cemented Threaded 050800
page 29 page 33
5

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


PRODUCT LIST

055801 113500
Bushimg for Unions: One Nut Valve
050801, 050802 Cemented
page 33 page 38

055803 113510
Mail Threaded Union One Nut Valve
bush for items 050803, 050804 Threaded
page 34 page 38

056800 113610
End for Unions: One Nut Valve
050800, 050802, 050803 Male - Female - Threaded
page 34 page 38

056810 111400
End for Unions: Two Nut Valve
050801, 050804 Cemented
page 34 page 39

056090 111410
O-Ring for Item Two Nut Valve
055000 Threaded
page 35 page 39

056290 112400-112700*
Seal for: Bistop Valve
055200, 053602 Cemented
page 35 page 40

056390 112410-112710*
O-Ring for Unions 050800, Bistop Valve
050801, 050802, 050803 050804 Threaded

page 36 page 40

111500 113400
Two Nut Valve One Nut Valve
Cemented Cemented
page 37 page 41

111510 113410
Two Nut Valve One Nut Valve
Threaded Threaded
page 37 page 41
6

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


PRODUCT LIST

113710 116300-116900
One Nut Valve Air Release Valve
Threaded Cemented
page 42 page 47

113790 116310-116910
One Nut Valve Air Release Valve
Female - Threaded - Compression Threaded
page 42 page 47

111480 111100
Two Nut Valve Valve Collar
PE End Connector Cemented
page 43 page 48

113780 111110
One Nut Valve Valve Collar
Compressor PE End Threaded
Connector
page 48
page 43

110800-110600 11112
110900-110000 Blue Handles
Check Valve Cemented page 49
page 44

110810-110610 11113
110910-110010 Red Handles
Check Valve Threaded page 49
page 44

050408 111140
Kmocker Tee Valve Nut
Cemented page 50
page 45

116400-116000 1115.207
Foot Valve PE End Connector
Cemented page 50
page 46

116410-116010
Foot Valve
Threaded
page 46
7

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


PVC CEMENTED FITTINGS

050100
Socket - Cemented

d
E
Z I
H

Quality Cod d E H l Z Weight PN Pack


U C K 050100016 16 21 30 14 2 7 16 2500
U C K 050100020 20 25 35 16 3 8 16 1500
U C K 050100025 25 30 42 19 4 11 16 1000
U C K 050100032 32 38 48 22 4 20 16 600
U C K 050100040 40 48 56 26 4 42 16 300
U C K 050100050 50 58 66 31 4 64 16 180
U C K 050100063 63 73 80 38 4 119 16 100
U C K 050100075 75 88 93 44 5 234 16 100
U C K 050100090 90 104 108 51 6 325 16 60
U C 050100110 110 126 128 61 6 525 16 28
U 050100125 125 143 145 69 7 803 16 24
U 050100140 140 161 160 76 8 1074 16 18
U 050100160 160 181 181 86 9 1339 16 9
U 050100200 200 228 224 106 12 2778 10 4
050100225 225 250 257 119 19 3670 10 3
*050100250 250 287 275 133 10 5800 10 2
*050100280 280 320 304 147 10 7750 10 1
*050100315 315 355 342 165 12 9820 10 1
Quality certifications : U= UNI-IIP, C= NF-CSTB, K = Kiwa

* DELIVERY PROGRAM

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


PVC CEMENTED FITTINGS

050200
Reducing Socket

d1
d
D

E
Male - Female - Cemented
I I1
L
H

Cod Dxdxd1 L l l1 E H Weight PN Pack


050200020016 20 x 16 x 16 16 14 14 20 36 6 16 3000
050200025016 25 x 20 x 16 19 16 14 22 39 10 16 1500
050200025020 25 x 20 x 20 19 16 16 25 42 10 16 1500
050200032016 32 x 25 x 16 22 19 14 22 41 15 16 1000
050200032020 32 x 25 x 20 22 19 19 25 45 16 16 1000
050200032025 32 x 25 x 25 22 19 19 31 50 20 16 800
050200040016 40 x 32 x 16 26 22 14 22 50 23 16 800
050200040020 40 x 32 x 20 26 22 16 26 52 26 16 700
050200040025 40 x 32 x 25 26 24 19 32 49 27 16 500
050200040032 40 x 32 x 32 26 22 29 39 57 35 16 500
050200050020 50 x 40 x 20 31 26 16 27 61 50 16 400
050200050025 50 x 40 x 25 31 26 19 33 62 50 16 300
050200050032 50 x 40 x 32 33 26 22 40 65 55 16 300
050200050040 50 x 40 x 40 31 26 26 49 69 65 16 300
050200063025 63 x 50 x 25 38 31 19 32 72 88 16 170
050200063032 63 x 50 x 32 38 31 22 40 76 93 16 170
050200063040 63 x 50 x 40 38 33 26 49 79 100 16 150
050200063050 63 x 50 x 50 34 31 47 61 85 123 16 150
050200075032 75 x 63 x 32 44 38 22 40 86 120 16 190
050200075040 75 x 63 x 40 44 38 26 49 87 130 16 170
050200075050 75 x 63 x 50 44 41 42 61 92 150 16 150
050200075063 75 x 63 x 63 44 38 38 73 100 163 16 110
050200090040 90 x 75 x 40 51 44 26 49 99 225 16 110
050200090050 90 x 75 x 50 51 44 31 62 103 232 16 100
050200090063 90 x 75 x 63 51 44 38 74 111 259 16 100
050200090075 90 x 75 x 75 51 44 44 89 117 290 16 80
050200110050 110 x 90 x 50 61 51 31 61 117 410 16 80
050200110063 110 x 90 x 63 61 51 38 76 125 441 16 65
050200110075 110 x 90 x 75 61 51 44 90 133 490 16 35
050200110090 110 x 90 x 90 61 51 51 106 138 545 16 45
050200125063 125 x 110 x 63 69 61 38 78 121 460 16 44
050200125075 125 x 110 x 75 69 61 44 90 125 460 16 44
050200125090 125 x 110 x 90 69 61 51 104 126 460 16 44
050200125110 125 x 110 x 110 69 61 61 123 127 440 16 32
050200140110 140 x 125 x 110 76 69 61 130 149 645 16 24
050200160110 160 x 140 x 110 86 76 61 130 157 825 16 25
050200160125 160 x 140 x 125 86 76 69 145 160 890 16 18
050200225160 225 x 200 x 160 119 106 86 185 230 2100 10 6

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


PVC CEMENTED FITTINGS
E

050400 d

90° Tee - Cemented

I
Z
H

Quality Cod d E H l Z Weight PN Pack


U C K 050400016 16 23 46 14 9 18 16 1500
U C K 050400020 20 27 55 16 12 22 16 700
U C K 050400025 25 30 65 19 14 44 16 500
U C K 050400032 32 40 78 22 17 54 16 250
U C K 050400040 40 48 99 26 23 97 16 130
U C K 050400050 50 62 118 31 28 212 16 80
U C K 050400063 63 73 145 38 35 372 16 56
U C K 050400075 75 90 169 44 41 540 16 35
U C K 050400090 90 108 199 51 49 970 16 24
U C 050400110 110 129 239 61 59 1510 16 14
U 050400125 125 148 270 69 66 2234 16 9
U 050400140 140 162 298 76 73 2650 16 6
U 050400160 160 184 339 86 84 3793 10 3
*050400200 200 232 420 106 102 7200 10 2
*050400225 225 258 465 119 114 9700 10 1
*050400250 250 286 519 132.5 127 12070 10 1
*050400280 280 319 579 147.5 142 17480 10 1
*050400315 315 360 648 165 159 24350 10 1

Quality certifications : U= UNI-IIP, C= NF-CSTB, K = Kiwa

* DELIVERY PROGRAM
Z I

050500
90° Elbow - Cemented
d
E

Quality Cod d E H l Z Weight PN Pack


U C K 050500016 16 23 35 14 9 13 16 1800
U C K 050500020 20 25 41 16 12 21 16 1000
U C K 050500025 25 31 48 19 14 32 16 600
U C K 050500032 32 39 58 22 17 40 16 350
U C K 050500040 40 47 73 26 23 69 16 200
U C K 050500050 50 59 88 32 27 125 16 130
U C K 050500063 63 73 110 38 35 300 16 60
U C K 050500075 75 90 130 44 41 450 16 50
U C K 050500090 90 108 154 51 49 730 16 30
U C 050500110 110 132 186 61 59 1232 16 17
U 050500125 125 148 211 69 66 1668 16 12
U 050500140 140 162 230 76 73 1970 16 9
U 050500160 160 184 262 86 84 2850 16 5
*050500200 200 232 324 106 102 5850 10 3
*050500225 225 258 362 119 114 7500 10 2
*050500250 250 286 445 132 188 12150 10 1
*050500280 280 316 496 146 210 15620 10 1
*050500315 315 358 559 162 239 23500 10 1

Quality certifications : U= UNI-IIP, C= NF-CSTB, K = Kiwa

* DELIVERY PROGRAM
10

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


PVC CEMENTED FITTINGS

050700 H

End Cap - Cemented

d
E
I

Quality Cod d E H l Weight PN Pack


U C K 050700016 16 21 20 14 5 16 3000
U C K 050700020 20 25 24 16 10 16 2500
U C K 050700025 25 30 28 19 16 16 1400
U C K 050700032 32 38 32 22 28 16 1000
U C K 050700040 40 48 42 26 51 16 500
U C K 050700050 50 58 47 31 60 16 320
U C K 050700063 63 73 57 38 106 16 150
U C K 050700075 75 88 63 44 179 16 75
U C K 050700090 90 104 73 51 270 16 45
U C 050700110 110 126 85 61 416 16 25
U 050700125 125 143 98 69 640 16 40
U 050700140 140 161 108 76 905 16 30
U 050700160 160 181 123 86 1160 16 20

Quality certifications : U= UNI-IIP, C= NF-CSTB, K = Kiwa

050800
Union - Cemented
d

d
E

I Z I1
H

Cod d E H l L1 Z Weight PN Pack


050800016 16 34 39 14 14 11 9 16 1200
050800020 20 42 45 16 16 13 15 16 580
050800025 25 52 51 19 19 13 24 16 400
050800032 32 59 58 22 22 13 91 16 250
050800040 40 66 67 26 26 15 140 16 150
050800050 50 79 79 31 31 17 177 16 100
050800063 63 96 95 38 38 19 305 16 60
050800075 75 118 110 44 44 22 210 10 45
050800090 90 132 125 51 51 23 345 10 30
050800110 110 151 145 61 61 23 525 10 18

11

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


PVC CEMENTED FITTINGS

050900
Short Reducing
Bushing - Cemented

d
D
I Z
L

Quality Cod Dxd L l z Weight PN Pack


U C 050900020016 20 x 16 16 14 2 3 16 4500
U 050900025016 25 x 16 19 14 5 8 16 3000
U C 050900025020 25 x 20 19 16 3 5 16 3000
U 050900032016 32 x 16 22 14 8 15 16 1800
U 050900032020 32 x 20 22 16 6 15 16 1800
U C 050900032025 32 x 25 22 19 3 10 16 1800
U 050900040020 40 x 20 26 16 10 25 16 1100
U 050900040025 40 x 25 26 23 6 27 16 1000
U C 050900040032 40 x 32 26 22 4 17 16 1000
U 050900050025 50 x 25 31 19 12 43 16 550
U 050900050032 50 x 32 31 22 9 50 16 550
U C 050900050040 50 x 40 31 26 5 32 16 600
U 050900063032 63 x 32 38 22 16 76 16 360
U 050900063040 63 x 40 38 26 12 83 16 300
U C 050900063050 63 x 50 38 34 6 60 16 300
U 050900075040 75 x 40 44 26 18 121 16 126
U 050900075050 75 x 50 44 31 13 95 16 126
U C 050900075063 75 x 63 44 38 6 80 16 126
U 050900090050 90 x 50 51 31 20 195 16 80
U 050900090063 90 x 63 51 38 13 183 16 80
U C 050900090075 90 x 75 51 44 7 141 16 80
U 050900110063 110 x 63 61 38 23 344 16 40
U 050900110075 110 x 75 61 44 17 315 16 40
U C 050900110090 110 x 90 61 51 10 265 16 40
U 050900125075 125 x 75 69 44 25 450 16 60
U 050900125090 125 x 90 69 51 18 430 16 60
U 050900125110 125 x 110 69 61 8 265 16 60
050900140090 140 x 90 76 51 25 590 16 48
050900140110 140 x 110 76 61 15 447 16 48
050900140125 140 x 125 76 69 7 326 16 48
050900160110 160 x 110 86 61 25 775 16 30
050900160125 160 x 125 86 69 17 725 16 30
050900160140 160 x 140 86 76 10 560 16 36
050900200160 200 x 160 106 86 20 1400 10 15
050900225160 225 x 160 119 86 33 2450 10 10
050900225200 225 x 200 119 106 13 1406 10 10
*050900250160 250 x 160 134 87 47 2184 10 8
*050900250200 250 x 200 134 107 27 2700 10 8
*050900250225 250 x 225 132 120 12 2100 10 6
*050900280225 280 x 225 147 120 27 3090 10 6
*050900280250 280 x 250 147 132 15 2520 10 6
*050900315200 315 x 200 165 107 58 8550 10 4
*050900315225 315 x 225 165 132 33 8085 10 4
*050900315250 315 x 250 165 132 33 4100 10 4
*050900315280 315 x 280 165 149 16 4630 10 4

Quality certifications : U = UNI-IIP, C = NF-CSTB

* DELIVERY PROGRAM

12

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


PVC CEMENTED FITTINGS

E1
051400 d1

90° Reducing Tee

I1
Cemented

Z1
H1

d
E
Z I
H

Cod dxd1xd E E1 l l1 Z Z1 H H1 Weight PN Pack


051400025020 25 x 20 x 25 33 27 19 16 14 12.5 66 45 36 16 500
051400032020 32 x 20 x 32 42 33 22 16 17 27.5 78 54 69 16 300
051400032025 32 x 25 x 32 41 33 22 19 17 17.5 78 57 63 16 300
051400040020 40 x 20 x 40 50 30 26 16 23.5 22 99 63 104 16 180
051400040025 40 x 25 x 40 50 37 26 24 23.5 22 99 66 110 16 160
051400040032 40 x 32 x 40 50 44 26 22 23.5 22 99 72 120 16 150
051400050025 50 x 25 x 50 62 37 31 24 28 27.5 118 77 188 16 80
051400050032 50 x 32 x 50 61 41 31 22 28 27.5 118 80 190 16 80
051400050040 50 x 40 x 50 61 50 31 26 28 27.5 118 84 180 16 80
051400063032 63 x 32 x 63 77 41 38 22 34 34.5 144 95 335 16 56
051400063040 63 x 40 x 63 77 50 38 26 34 34.5 144 99 340 16 56
051400063050 63 x 50 x 63 77 61 38 31 34 34.5 144 104 350 16 56

053600 L

House Adaptor
Cemented
D

Cod d E H L Weight PN Pack


053600012 12 12 48 10 4 16 7200
053600016 16 16 58 14 8 16 3600
053600020 20 20 64 16 14 16 2000
053600025 25 25 75 19 26 16 1200
053600032 32 30 88 22 33 16 600
053600040 40 40 95 26 60 16 320
053600050 50 50 102 31 120 16 200
053600063 63 60 118 38 163 16 120

13

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


PVC CEMENTED FITTINGS

054500
45° Elbow - Cemented

E
d
Z
I
Quality Cod d E Z l Weight PN Pack
U C K 054500016 16 23 5 14 11 16 1800
U C K 054500020 20 26 5 16 12 16 1400
U C K 054500025 25 31 6 19 20 16 850
U C K 054500032 32 39 8 22 32 16 450
U C K 054500040 40 48 10 26 63 16 250
U C K 054500050 50 59 12 31 98 16 120
U C K 054500063 63 74 15 38 210 16 80
U C K 054500075 75 91 17 44 366 16 65
U C K 054500090 90 109 21 51 567 16 35
U C 054500110 110 129 25 61 850 16 21
U 054500125 125 148 28 69 1320 16 14
U 054500140 140 163 31 76 1620 16 12
U 054500160 160 184 35 86 2180 16 6
*054500200 200 232 45 106 5000 10 3
*054500225 225 258 50 119 6200 10 2
*054500250 250 287 58 131.5 7680 10 2
*054500280 280 320 62 147 10350 10 1
*054500315 315 360 66 165 14480 10 1

Quality certifications : U= UNI-IIP, C= NF-CSTB, K = Kiwa

* DELIVERY PROGRAM

055000
Flange Adaptor
with O-Ring
Cemented

Quality Cod d E E1 l Z B H Weight PN Pack


U 055000020 20 27 34 16 6 10 22 12 16 2000
U 055000025 25 33 41 19 6 10 25 18 16 1200
U 055000032 32 41 50 22 6 10 28 27 16 850
U 055000040 40 50 61 26 8 13 34 55 16 400
U 055000050 50 61 73 31 8 13 39 70 16 270
U 055000063 63 76 90 38 8 14 46 120 16 160
U 055000075 75 88 106 44 8 15 53 175 16 135
U 055000090 90 105 125 51 10 16 61 270 16 75
U 055000110 110 126 150 61 11 18 72 420 16 48
U 055000125 125 146 169 69 11 17 80 670 16 40
U 055000140 140 163 188 76 12 18 88 860 16 21
U 055000160 160 185 213 86 12 19 98 1140 16 16
055000200 200 228 254 106 13 23 119 1300 10 8
055000225 225 249 272 119 14 25 133 1500 10 6

Quality certifications : U = UNI-IIP

14

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


PVC CEMENTED FITTINGS

055100
Stub Flat Face to
fit 055000
Cemented

Quality Cod d E E1 l Z B H Weight PN Pack


U 055100020 20 27 34 16 3 7 19 10 16 2000
U 055100025 25 33 41 19 3 7 22 16 16 1200
U 055100032 32 41 50 22 3 7 25 25 16 850
U 055100040 40 50 61 26 3 8 29 40 16 400
U 055100050 50 61 73 31 3 8 34 60 16 270
U 055100063 63 76 90 38 3 9 41 100 16 160
U 055100075 75 88 106 44 4 10 48 150 16 135
U 055100090 90 105 125 51 5 11 56 240 16 75
U 055100110 110 126 150 61 5 12 66 370 16 48
U 055100125 125 146 169 69 5 11 74 585 16 40
U 055100140 140 163 188 76 6 12 82 735 16 21
U 055100160 160 185 213 86 6 13 92 1000 16 16
055100200 200 228 254 106 7 17 113 1655 10 8
055100225 225 249 272 119 8 18 126 1805 10 6

Quality certifications : U = UNI-IIP

B
055200
Stub Serrated
Cemented
d

E1
E

I Z
H

Quality Cod d E E1 l Z B H Weight PN Pack


U 055200020 20 27 34 16 3 7 19 10 16 2000
U 055200025 25 33 41 19 3 7 22 16 16 1200
U 055200032 32 41 50 22 3 7 25 25 16 850
U 055200040 40 50 61 26 3 8 29 40 16 400
U 055200050 50 61 73 31 3 8 34 60 16 270
U 055200063 63 76 90 38 3 9 41 100 16 160
U 055200075 75 88 106 44 4 10 48 150 16 135
U 055200090 90 105 125 51 5 11 56 240 16 75
U 055200110 110 126 150 61 5 12 66 380 16 48
U 055200125 125 146 169 69 5 11 74 590 16 40
U 055200140 140 163 188 76 6 12 82 735 16 21
U 055200160 160 185 213 86 6 13 92 1000 16 16
055200200 200 228 254 106 7 19 114 1677 10 8
055200225 225 249 272 119 8 18 126 1810 10 6
*055200250 250 273 307 131 10 20 131 2320 10 4
*055200280 280 308 329 142 10 23 142 3036 10 5
*055200315 315 346 379 161 11 27 161 4578 10 3

Quality certifications : U = UNI-IIP

* DELIVERY PROGRAM
15

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


PVC CEMENTED FITTINGS

059000
Loose Flange

Dp

E1
E
S
H

Quality Cod d E E1 H Dp S N Weight PN Pack


059000020 20 25 95 12 65 14 4 85 16 450
059000025 25 32 105 12 75 14 4 120 16 400
U 059000032 32 44 115 14 85 14 4 130 16 180
U 059000040 40 54 140 15 100 18 4 205 16 100
U 059000050 50 65 150 16 110 18 4 235 16 80
U 059000063 63 80 165 18 125 18 4 300 16 75
U 059000075 75 94 185 19 145 18 4 390 16 50
U 059000090 90 112 200 20 160 18 8 460 16 40
U 059000110 110 135 220 22 180 18 8 540 16 30
U 059000125 125 151 230 25 191 18 8 585 16 30
U 059000140 140 164 250 28 211 18 8 746 16 20
U 059000160 160 193 289 30 241 22 8 1050 16 26
059000200 200 233 340 32 297 22 8 1402 10 12
059000225 225 243 340 32 295 22 8 1249 10 12
*059000250 250 280 395 34 350 34 12 1680 10 8
*059000280 280 310 395 30 350 30 12 2000 10 8
*059000315 315 349 445 31 400 31 12 2700 10 8

Quality certifications : U = UNI-IIP

* DELIVERY PROGRAM

059100
Blind Flange
Dp

E
S

Cod d E H Dp S N Weight PN Pack


059100032 32 115 14 85 14 4 143 16 100
059100040 40 140 15 100 18 4 240 16 100
059100050 50 150 16 110 18 4 286 16 80
059100063 63 165 18 125 18 4 390 16 75
059100075 75 185 19 145 18 4 490 16 50
059100090 90 200 20 160 18 8 640 16 40
059100110 110 220 22 180 18 8 786 16 30
059100125 125 230 25 191 18 8 848 16 25
059100140 140 250 28 211 18 8 1125 16 20
059100160 160 289 30 241 22 8 1743 16 15
059100200 200 340 32 297 22 8 2700 10 12
059100225 225 340 32 297 22 8 2950 10 12

16

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


PVC CEMENTED FITTINGS

059200
Fixed Flange

Dp
d

E
I Z

S
H

Quality Cod d I E H Dp S N Z Weight PN Pack


U 059200032 32 22 115 23 85 14 4 3 140 16 144
U 059200040 40 26 140 27 100 18 4 3 240 16 70
U 059200050 50 31 150 32 110 18 4 3 290 16 60
U 059200063 63 38 165 39 125 18 4 3 400 16 45
U 059200075 75 44 185 47 145 18 4 4 540 16 25
U 059200090 90 51 200 54 160 18 8 5 710 16 18
U 059200110 110 61 220 64 180 18 8 6 940 16 12

Quality certifications : U = UNI-IIP

17

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


PVC ADAPTOR FITTINGS
B
050102
Socket Adaptor

G
d
Cemented Threaded

C
I Z Lt
H

Cod dxG C B l Lt Z H Weight PN Pack


050102016003 16 x 3/8” 25 12 14 13 3 30 10 16 2300
050102020005 20 x 1/2” 30 12 16 17 3 36 18 16 1400
050102025007 25 x 3/4” 40 12 19 18 3 40 27 16 900
050102032010 32 x 1” 45 12 22 20 3 45 42 16 500
050102040013 40 x 1.1/4” 51 16 26 22 4 52 50 16 300
050102050015 50 x 1.1/2” 63 16 31 22 4 57 100 16 200
050102063020 63 x 2” 80 16 38 26 4 68 150 16 100
050102075025 75 x 2.1/2” 90 20 44 29 5 78 190 16 60
050102090030 90 x 3” 108 24 51 33 5 89 333 16 60
050102110040 110 x 4” 130 28 61 40 5 106 483 16 32

050202
Reducer Adaptor
Male - Female
Cemented Threaded

Cod DxdxG C B L Lt H Weight PN Pack


050202025005 25 x 20 x 1/2” 30 12 19 17 46 19 16 1200
050202032007 32 x 25 x 3/4” 36 12 22 18 50 30 16 700
050202040010 40 x 32 x 1” 47 16 26 20 63 60 16 350
050202050013 50 x 40 x 1.1/4” 65 16 31 22 68 111 16 200
050202063013 63 x 50 x 1.1/4” 65 16 38 22 75 135 16 150
050202063015 63 x 50 x 1.1/2” 65 16 38 22 75 135 16 150
050202075020 75 x 63 x 2” 80 20 44 26 83 180 16 120
050202090025 90 x 75 x 2.1/2” 95 20 51 29 94 268 16 80
050202110030 110 x 90 x 3” 120 20 61 33 106 468 16 50

050302 H
B
Adaptor Socket
Male - Female
G
d

Cemented Threaded
L Lt

Cod dxG C B L Lt H Weight PN Pack


050302020005 20 x 1/2” 30 12 16 12 40 15 16 1000
050302025007 25 x 3/4” 30 12 19 18 46 24 16 700
050302032010 32 x 1” 36 12 22 20 51 46 16 500
050302040013 40 x 1.1/4” 50 16 26 22 61 61 16 300
050302050015 50 x 1.1/2” 65 16 31 22 64 118 16 200
050302063020 63 x 2” 65 16 38 26 73 148 16 100
050302075025 75 x 2.1/2” 80 20 44 29 87 180 16 90
050302090030 90 x 3” 95 20 51 33 97 328 16 50
050302110040 110 x 4” 120 20 61 40 112 478 16 30

18

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


PVC ADAPTOR FITTINGS
E
G
050402

Lt
90° Tee
Cemented Threaded

d
E
Z I
H

Cod dxGxd E l Lt Z H Weight PN Pack


050402016003 16 x 3/8” 22 14 13 9 46 16 16 1440
050402020005 20 x 1/2” 27 16 17 11 55 24 16 700
050402025007 25 x 3/4” 33 19 18 14 65 39 16 500
050402032010 32 x 1” 41 22 20 17 78 70 16 250
050402040013 40 x 1.1/4” 48 26 22 21 98 121 16 130
050402050015 50 x 1.1/2” 62 31 22 26 118 205 16 80
050402063020 63 x 2” 73 38 26 33 145 400 16 56
050402075025 75 x 2.1/2” 90 44 29 40 170 620 16 35
050402090030 90 x 3” 108 51 33 48 199 1006 16 24
050402110040 110 x 4” 132 61 40 58 229 1620 16 14

Lt
050502
90° Elbow

G
E
Cemented Threaded
Z
I

d
E
H

Cod dxG E l Lt Z H Weight PN Pack


050502016003 16 x 3/8” 23 14 13 9 34 10 16 2000
050502020005 20 x 1/2” 20 16 17 11 41 15 16 1000
050502025007 25 x 3/4” 30 19 18 14 49 25 16 600
050502032010 32 x 1” 38 22 20 17 60 45 16 350
050502040013 40 x 1.1/4” 48 26 22 21 74 70 16 200
050502050015 50 x 1.1/2” 62 31 22 26 90 165 16 130
050502063020 63 x 2” 73 38 26 33 111 315 16 60
050502075025 75 x 2.1/2” 90 44 29 40 130 469 16 50
050502090030 90 x 3” 108 51 33 47 154 775 16 32
050502110040 110 x 4” 132 61 40 57 186 1230 16 17

050602
Adaptor
d
D

R
C

Male - Female
Cemented - Male Threaded I
B
L Lt
H

Cod DxdxR C B l L Lt H Weight PN Pack


050602016003 16 x 12 x 3/8” 22 12 12 14 11 37 10 16 2700
050602020005 20 x 16 x 1/2” 24 12 14 16 16 44 18 16 2000
050602025007 25 x 20 x 3/4” 30 12 16 19 17 48 27 16 1200
050602032010 32 x 25 x 1” 36 12 19 22 19 55 29 16 700
050602040013 40 x 32 x 1.1/4” 46 16 22 26 22 64 64 16 400
050602050015 50 x 40 x 1.1/2” 50 16 26 31 22 69 103 16 220
050602063020 63 x 50 x 2” 65 16 31 38 26 80 167 16 140
050602075025 75 x 63 x 2.1/2” 76 12 38 44 29 85 158 16 125
050602090030 90 x 75 x 3” 95 20 44 51 33 104 329 16 75
050602110040 110 x 90 x 4” 120 20 51 61 41 122 483 16 32

19

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


PVC ADAPTOR FITTINGS

050802
Union Adaptor

G
d
E
Female - Cemented
Threaded Lt Z Lt
H

Cod dxG E l Lt Z H Weight PN Pack


050802016003 16 x 3/8” 34 14 13 13 39 22 16 1000
050802020005 20 x 1/2” 42 16 17 12 46 39 16 580
050802025007 25 x 3/4” 52 19 18 15 51 63 16 400
050802032010 32 x 1” 59 22 20 17 57 87 16 250
050802040013 40 x 1.1/4” 72 26 24 16 66 140 16 150
050802050015 50 x 1.1/2” 79 31 24 17 72 190 16 100
050802063020 63 x 2” 96 38 34 20 92 334 16 60
050802075025 75 x 2.1/2” 118 44 29 50 110 566 10 45
050802090030 90 x 3” 132 51 33 59 125 730 10 30
050802110040 110 x 4” 151 61 40 63 145 1213 10 18

052102
Adaptor
d
D

R
C
Male - Female - Cemented
Male - Threaded I
B
L Lt
H

Cod DxdxR C B l L Lt H Weight PN Pack


052102016003 20 x 16 x 3/8” 22 12 14 16 11 40 10 16 2500
052102020005 25 x 20 x 1/2” 30 12 16 19 16 47 17 16 1300
052102025007 32 x 25 x 3/4” 36 12 19 22 17 51 27 16 800
052102032010 40 x 32 x 1” 46,5 16 22 26 19 62 53 16 450
052102040013 50 x 40 x 1.1/4” 50 16 26 31 22 70 70 16 250
052102050015 63 x 50 x 1.1/2” 65 16 31 38 22 76 140 16 170
052102063020 75 x 63 x 2” 76 12 38 44 26 82 158 16 120
052102075025 90 x 75 x 2.1/2” 95 20 44 51 30 101 310 16 60
052102090030 110 x 90 x 3” 120 20 51 61 33 114 550 16 50
052102110040 125 x 110 x 4” 130 20 61 69 41 130 590 16 30

052202
Bushing Adaptor
d
D

R
C

Male - Female - Cemented


Male - Threaded I
B
L Lt
H

Cod DxdxR C B l L L1 H Weight PN Pack


052202020003 25 x 20 x 3/8” 30 12 16 19 11 42 15 16 1400
052202025005 32 x 25 x 1/2” 36 12 19 22 16 50 25 16 900
052202032007 40 x 32 x 3/4” 46 16 22 26 17 59 51 16 450
052202040010 50 x 40 x 1” 50 16 26 31 19 66 97 16 200
052202050013 63 x 50 x 1.1/4” 65 16 31 38 22 76 135 16 170
052202063015 75 x 63 x 1.1/2” 76 12 38 44 22 78 153 16 154
052202075020 90 x 75 x 2” 95 20 44 51 26 97 285 16 60
052202090025 110 x 90 x 2.1/2” 120 20 51 61 30 111 528 16 50
052202110030 125 x 110 x 3” 130 20 61 69 33 122 545 16 42

20

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


PVC ADAPTOR FITTINGS

053602
House Adaptor
With Threaded Nut

E
H

Cod GxE E H Weight PN Pack


053602016007 3/4” x 16 16 67 21 10 1000
053602020010 1” x 20 20 72 32 10 700
053602025013 1.1/4” x 25 25 80 54 10 400
053602030015 1.1/2” x 30 30 91 69 10 250
053602040020 2” x 40 40 97 124 10 150
053602050023 2.1/4” x 50 50 104 186 10 120
053602060027 2.3/4” x 60 60 118 260 10 70

054502
45° Elbow

E
G
Cemented - Threaded
Z
I

Cod dxG E Z l Weight PN Pack


054502016003 16 x 3/8” 23 5 14 13 16 1800
054502020005 20 x 1/2” 26 5 16 15 16 1400
054502025007 25 x 3/4” 31 6 19 24 16 850
054502032010 32 x 1” 39 8 22 42 16 450
054502040013 40 x 1.1/4” 48 10 26 70 16 250
054502050015 50 x 1.1/2” 59 12 31 121 16 120
054502063020 63 x 2” 74 15 38 230 16 80

051402
90° Reducing Tee
Cemented - Threaded

Cod dxGxd E E1 l l1 Z Z1 H H1 Weight PN Pack


051402025005 25 x 1/2” x 25 33 27 19 16 14 12.5 66 45 36 16 500
051402032005 32 x 1/2” x 32 42 33 22 16 17 27.5 78 54 69 16 300
051402032007 32 x 3/4” x 32 41 33 22 19 17 17.5 78 57 63 16 300
051402040005 40 x 1/2” x 40 50 30 26 16 23.5 22 99 63 104 16 180
051402040007 40 x 3/4” x 40 50 37 26 24 23.5 22 99 66 110 16 160
051402040010 40 x 1” x 40 50 44 26 22 23.5 22 99 72 120 16 150
051402050007 50 x 3/4” x 50 62 37 31 24 28 27.5 118 77 188 16 80
051402050010 50 x 1” x 50 61 41 31 22 28 27.5 118 80 190 16 80
051402050013 50 x 1.1/4” x 50 61 50 31 26 28 27.5 118 84 180 16 80
051402063010 63 x 1” x 63 77 41 38 22 34 34.5 144 95 335 16 56
051402063013 63 x 1.1/4 x 63 77 50 38 26 34 34.5 144 99 340 16 56
051402063015 63 x 1.1/2” x 63 77 61 38 31 34 34.5 144 104 350 16 56

21

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


PVC ADAPTOR FITTINGS

057102
Socket Adaptor
Cemented - Threaded
with Reinforcing Ring

Cod dxG C B l Lt Z H Weight PN Pack


057102016003 16 x 3/8” 25 12 14 13 3 30 10 16 2300
057102020005 20 x 1/2” 30 12 16 17 3 36 18 16 1400
057102025007 25 x 3/4” 40 12 19 18 3 40 27 16 900
057102032010 32 x 1” 45 12 22 20 3 45 42 16 500
057102040013 40 x 1.1/4” 51 16 26 22 4 52 50 16 300
057102050015 50 x 1.1/2” 63 16 31 22 4 57 100 16 200
057102063020 63 x 2” 80 16 38 26 4 68 150 16 100

057202
Reduder Adaptor
with Reinforcing
Ring
Male - Cemented
Female - Threaded

Cod DxdxG C B L Lt H Weight PN Pack


057202025005 25 x 20 x 1/2” 30 12 19 17 46 19 16 1200
057202032007 32 x 25 x 3/4” 36 12 22 18 50 30 16 700
057202040010 40 x 32 x 1” 47 16 26 20 63 60 16 350
057202050013 50 x 40 x 1.1/4” 65 16 31 22 68 111 16 200
057202063013 63 x 50 x 1.1/4” 65 16 38 22 75 135 16 150
057202063015 63 x 50 x 1.1/2” 65 16 38 22 75 135 16 150

22

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


PVC ADAPTOR FITTINGS

057402
90° Tee
with Reinforcing
Ring
Cemented - Threaded

Cod dxGxd E l Lt Z H Weight PN Pack


057402016003 16 x 3/8” 22 14 13 9 46 16 16 1440
057402020005 20 x 1/2” 27 16 17 11 55 24 16 700
057402025007 25 x 3/4” 33 19 18 14 65 39 16 500
057402032010 32 x 1” 41 22 20 17 78 70 16 250
057402040013 40 x 1.1/4” 48 26 22 21 98 121 16 130
057402050015 50 x 1.1/2” 62 31 22 26 118 205 16 80
057402063020 63 x 2” 73 38 26 33 145 400 16 56

057502
90° Elbow
with Reinforcing
Ring
Cemented - Threaded

Cod dxG E l Lt Z H Weight PN Pack


057502016003 16 x 3/8” 23 14 13 9 34 10 16 2000
057502020005 20 x 1/2” 20 16 17 11 41 15 16 1000
057502025007 25 x 3/4” 30 19 18 14 49 25 16 600
057502032010 32 x 1” 38 22 20 17 60 45 16 350
057502040013 40 x 1.1/4” 48 26 22 21 74 70 16 200
057502050015 50 x 1.1/2” 62 31 22 26 90 165 16 130
057502063020 63 x 2” 73 38 26 33 111 315 16 60

23

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


PVC ADAPTOR FITTINGS
L
058900 B
Metal Pipe & Tap h Z E
5629
Connectors, with e
EPDM gaskets and PVC
Spigot x brass nuts K G
di
D
Female - Threaded
C Di

Cod D di G E e Z B L Di K C 5629 h Weight PN Pack


05890025010 25 20 1” 18,5 17 24 42,5 54 17 36 20 30 x 21 x 2 9,5 74 10 310
05890032013 32 25 1¼” 22 20 25,5 48 60 20 45 22 38 x 27 x 2 10,5 120 10 200
05890040015 40 32 1½” 27 22,5 28,5 55 69 29 52 24 44 x 32 x 2 12 166 10 140
05890050020 50 40 2” 32 27 30 62 77 35 64 26 62 x 46 x 2 13 250 10 95

L
058100 5629
h B

Metal Pipe & Tap Z E

Connectors, with
EPDM gaskets and PVC K G D A

Socket x brass nuts


C
Female - Threaded Di

Cod A D G E Z B L Di K C 5629 h Weight PN Pack


058100025010 30 25 1” 19 46 65 76,5 17 37 20 30 x 21 x 2 9,5 86 10 250
058100032013 38 32 1¼” 22 51,5 73,5 86 20 46 22 38 x 27 x 2 10,5 140 10 150
058100040015 48 40 1½” 27 58 85 100 29 53 24 44 x 32 x 2 12,5 211 10 100

24

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


PVC ADAPTOR FITTINGS
L
058200 B
Metal Pipe & Tap 5629
h Z E

Connectors, with
EPDM gaskets and PVC K G
D A
Socket x brass nuts
Female - Threaded C Di

Cod A D G E Z B L Di K C 5629 h Weight PN Pack


058200025007 32 25 ¾” 19 47 66 77 14 30 18 24 x 16 x 2 8 66 10 300
058200032010 40 32 1” 22 50 72 82,5 17 37 20 30 x 21 x 2 9,5 100 10 200
058200040013 50 40 1¼” 26 65 91 103,5 20,5 46 22 38 x 27 x 2 11 174 10 130
058200050015 63 50 1½” 31 78 109 122 29 53 24 44 x 32 x 2 12 266 10 75
058200063020 75 63 2” 39 85 124 138,5 35 64 26 62 x 46 x 2 13 394 10 50

L
B
058901 5629 h Z E
Metal Pipe & Tap e
Connectors, with
EPDM gaskets and PVC K G di D
Spigot x brass nuts
Female - Threaded c Di

Cod D di G E e Z B L Di K C 5629 h Weight PN Pack


058901025007 25 20 ¾” 19 16 24 43 54,5 17 30 20 30 x 21 x 2 9,5 124 10 180
058901032010 32 25 1” 22 19 25,5 48 60 20,5 45 22 38 x 27 x 2 10,5 224 10 110
058901040013 40 32 1¼” 26 22 28 55 63 29 53 24 44 x 32 x 2 12 276 10 90

25

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


PVC THREADED FITTINGS
B
050101
Socket - Threaded

G
C
Lt Z
H

Cod G C B Lt Z H Weight PN Pack


050101003 3/8” 25 12 13 4 30 10 16 2300
050101005 1/2” 30 12 17 2 36 16 16 1400
050101007 3/4” 40 12 18 4 40 28 16 900
050101010 1” 45 12 20 5 45 39 16 500
050101013 1.1/4” 51 16 22 8 52 55 16 300
050101015 1.1/2” 63 16 22 13 57 112 16 200
050101020 2” 80 16 26 16 68 166 16 100
050101025 2.1/2” 90 20 29 20 78 200 16 60
050101030 3” 108 24 33 23 89 310 16 60
050101040 4” 130 28 40 26 106 450 16 32

050103
Socket - Threaded
Female - Female

Cod GxG1 C B l Lt Z H Weight PN Pack


050103007005 1/2” x 3/4” 40 12 13 14 3 38,3 27 16 600
050103010007 1” x 3/4” 45 12 14 17 3 42,21 37 16 500

26

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


PVC THREADED FITTINGS

050201
B
Lt Lt1

Reducer
Male - Female - Threaded

G
C
R
H

Cod RXG C B Lt Lt1 H Weight PN Pack


050201005003 1/2” x 3/8” 30 12 13 17 40 17 16 1600
050201007003 3/4” x 3/8” 36 12 13 18 41 18 16 1400
050201007005 3/4” x 1/2” 36 12 17 18 45 21 16 1100
050201010003 1” x 3/8” 40 10 11 19 41 20 16 900
050201010005 1” x 1/2” 40 12 22 11 46 33 16 900
050201010007 1” x 3/4” 36 12 18 20 48 30 16 800
050201013005 1.1/4” x 1/2” 46 16 17 22 53 52 16 450
050201013007 1.1/4” x 3/4” 46 16 18 22 54 52 16 450
050201013010 1.1/4” x 1” 55 16 24 22 58 71 16 350
050201015005 1.1/2” x 1/2” 50 16 22 15 52 59 16 340
050201015007 1.1/2” x 3/4” 50 16 18 22 54 61 16 340
050201015010 11/2” x 1” 50 16 20 22 59 99 16 340
050201015013 1.1/2” x 1.1/4” 55 16 23 24 58 74 16 300
050201020007 2” x 3/4” 70 18 16 26 60 80 16 200
050201020010 2” x 1” 65 16 20 26 62 105 16 200
050201020013 2” x 1.1/4” 65 16 22 26 63 109 16 200
050201020015 2” x 1.1/2” 65 16 22 26 63 109 16 200
050201025015 2.1/2” x 1.1/2” 80 20 22 29 66 163 16 168
050201025020 2.1/2” x 2” 80 20 26 29 68 170 16 80
050201030020 3” x 2” 95 20 34 19 72 245 16 120
050201030025 3” x 2.1/2” 95 20 29 33 76 254 16 110
050201040025 4” x 2.1/2” 120 20 29 40 87 400 16 57
050201040030 4” x 3” 120 20 42 25 86 406 16 57

E
050401 G

90° Tee - Threaded


Lt

Cod G E Lt H Weight PN Pack


050401003 3/8” 22 13 46 16 16 1500
050401005 1/2” 28 17 55 29 16 700
050401007 3/4” 33 18 65 40 16 500
050401010 1” 42 24 78 77 16 250
050401013 1.1/4” 48 22 98 120 16 130
050401015 1.1/2” 62 22 118 240 16 80
050401020 2” 73 26 145 480 16 56
050401025 2.1/2” 90 29 170 644 16 35
050401030 3” 108 33 199 1100 16 24
050401040 4” 132 40 239 1625 16 14

27

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


PVC THREADED FITTINGS

050501 Lt

90° Elbow - Threaded

G
E
H

Cod G E Lt H Weight PN Pack


050501003 3/8” 23 13 35 10 16 1800
050501005 1/2” 20 17 42 15 16 1000
050501007 3/4” 30 18 50 25 16 600
050501010 1” 38 20 60 45 16 350
050501013 1.1/4” 48 22 75 90 16 200
050501015 1.1/2” 62 22 90 180 16 130
050501020 2” 73 26 111 355 16 60
050501025 2.1/2” 90 29 130 508 16 50
050501030 3” 108 33 154 861 16 30
050501040 4” 132 40 186 1225 16 17

B Lt
050601
Nipple - Threaded
R
C

Cod R C B Lt H Weight PN Pack


050601003 3/8” 22 12 11 35 10 16 2800
050601005 1/2” 24 12 16 45 13 16 2000
050601007 3/4” 30 12 17 47 20 16 1300
050601010 1” 36 12 19 51 30 16 700
050601013 1.1/4” 46 16 22 60 56 16 400
050601015 1.1/2” 50 16 22 60 65 16 300
050601020 2” 65 16 26 68 107 16 150
050601025 2.1/2” 80 20 30 80 190 16 96
050601030 3” 95 20 33 87 268 16 85
050601040 4” 120 20 41 102 520 16 42

B
050701
Cap - Threaded
G
C

Lt
H

Cod G C B Lt H Weight PN Pack


050701003 3/8” 25 12 16 25 10 16 2600
050701005 1/2” 30 12 19 27 16 16 1400
050701007 3/4” 40 12 18 30 26 16 1100
050701010 1” 45 12 22 32 30 16 530
050701013 1.1/4” 52 12 22 33 42 16 300
050701015 1.1/2” 58 12 24 38 62 16 300
050701020 2” 75 12 22 45 117 16 160
050701025 2.1/2” 95 20 32 51 205 16 70
050701030 3” 110 20 32 51 274 16 80
050701040 4” 130 20 35 63 453 16 56

28

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


PVC THREADED FITTINGS

050801
Union Female
Threaded

G
G
E
Lt Z Lt
H

Cod G E Lt Z H Weight PN Pack


050801003 3/8” 34 13 13 39 22 16 1000
050801005 1/2” 42 17 12 46 49 16 580
050801007 3/4” 52 18 15 51 65 16 400
050801010 1” 59 20 17 57 90 16 250
050801013 1.1/4” 72 24 18 66 140 16 150
050801015 1.1/2” 79 24 24 72 190 16 100
050801020 2” 96 34 24 92 350 16 60
050801025 2.1/2” 118 30 50 110 570 10 45
050801030 3” 132 33 59 125 740 10 30
050801040 4” 151 41 63 145 1220 10 18

B Lt
050803
Union
Male - Female

R
C
d
E

Cemented - Threaded
Lt1
H

Cod dxR Lt Lt1 E H C B Weight PN Pack


050803025007 25 x 3/4” 17 19 51 66 40 12 79 16 350
050803032010 32 x 1” 22 22 58 73 45 13 109 16 250
050803040013 40 x 1.1/4” 25 22 72 90 55 16 187 16 150
050803050015 50 x 1.1/2” 22 31 79 79 50 16 180 16 100
050803063020 63 x 2” 26 38 96 93 65 16 310 16 60

B Lt

050804
Union
G
E

R
C

Male - Female
Threaded Lt1
H

Cod GxR Lt Lt1 E H C B Weight PN Pack


050804007 3/4” x 3/4” 17 19 51 66 40 12 79 16 350
050804010 1” x 1” 22 22 58 73 45 13 109 16 250
050804013 1.1/4” x 1.1/4” 22 22 72 67 46 16 135 16 150
050804015 1.1/2” x 1.1/2” 22 22 79 79 50 16 180 16 100
050804020 2” x 2” 26 26 96 93 65 16 310 16 60

29

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


PVC THREADED FITTINGS

Lt Lt1
051601
Reducing Nipple
Threaded

R1

R
C
B
H

Cod RxR1 C B Lt Lt1 H Weight PN Pack


051601005003 1/2” x 3/8” 24 12 16 11 39 11 16 2200
051601007003 3/4” x 3/8” 30 12 17 16 45 18 16 1400
051601007005 3/4” x 1/2” 30 12 17 11 40 17 16 1300
051601010005 1” x 1/2” 38 12 19 17 46 27 16 900
051601010007 1” x 3/4” 36 12 19 16 45 26 16 800
051601013007 1.1/4” x 3/4” 50 16 22 19 57 57 16 400
051601013010 1.1/4 x 1” 50 16 22 17 55 54 16 350
051601015010 1.1/2” x 1” 50 16 22 22 56 59 16 350
051601015013 1.1/2” x 1.1/4” 50 16 22 22 60 60 16 300
051601020013 2” x 1.1/4” 65 16 26 22 64 104 16 200
051601020015 2” x 1.1/2” 65 16 26 22 64 97 16 180
051601025015 2.1/2” x 1.1/2” 80 20 30 22 72 170 16 164
051601025020 2.1/2” x 2” 80 20 30 26 76 176 16 164
051601030020 3” x 2” 90 20 33 30 83 265 16 75
051601030025 3” x 2.1/2” 90 20 33 26 79 251 16 70
051601040025 4” x 2.1/2” 120 20 41 33 94 435 16 70
051601040030 4” x 3” 120 20 41 30 91 422 16 70

30

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


PVC THREADED FITTINGS
Lt
B
051701
Plug - Threaded

R
C
H

Cod R C B Lt H Weight PN Pack


051701003 3/8” 22 12 13 25 7 16 3000
051701005 1/2” 24 12 17 30 12 16 2500
051701007 3/4” 30 12 18 32 16 16 1500
051701010 1” 36 12 20 35 24 16 1100
051701013 1.1/4” 46 16 22 43 47 16 500
051701015 1.1/2” 51 16 22 44 57 16 480
051701020 2” 65 16 26 48 97 16 250
051701025 2.1/2” 80 20 30 56 160 16 82
051701030 3” 95 20 33 61 263 16 70
051701040 4” 120 20 40 71 425 16 72

053601 Lt

House Adaptor
C
R

E
Threaded
H

Cod RxE C B Lt H Weight PN Pack


053601012004 1/4” x 12 16 12 11 49 6 16 5600
053601016003 3/8” x 16 22 12 13 58 12 16 2200
053601020005 1/2” x 20 26 12 16 64 18 16 1600
053601025007 3/4” x 25 30 12 17 72 30 16 1000
053601030010 1” x 30 36 16 19 84 38 16 560
053601040013 1.1/4” x 40 46 16 22 91 70 16 280
053601050015 1.1/2” x 50 50 16 22 94 107 16 200
053601060020 2” x 60 65 16 26 118 150 16 120

052201
Nipple Socket
G
R
C

Male - Female - Threaded


Lt B Lt1
H

Cod RxG C B Lt Lt1 H Weight PN Pack


052201003005 3/8” x 1/2” 30 12 17 11 40 18 16 1100
052201005007 1/2” x 3/4” 36 12 18 16 44 25 16 900
052201007010 3/4” x 1” 46 16 20 17 45 40 16 600
052201010013 1” x 1.1/4” 55 16 22 18 57 68 16 300
052201013015 1.1/4” x 1.1/2” 65 16 24 20 61 109 16 250
052201015020 1.1/2” x 2” 80 16 26 24 66 169 16 150
052201015025 1.1/2” x 2.1/2” 80 20 29 22 65 200 16 170
052201020025 2” x 2.1/2” 95 20 29 26 69 210 16 170
052201020030 2” x 3” 95 20 33 26 70 320 16 85
052201025030 2.1/2” x 3” 120 20 33 30 74 340 16 70
052201025040 2.1/2” x 4” 120 20 40 30 82 410 16 70
052201030040 3” x 4” 130 20 40 33 87 430 16 70

31

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


PVC THREADED FITTINGS

054501
45° Elbow

E
G
Threaded

Z
Lt
Cod G E Z Lt Weight PN Pack
054501005 1/2” 26 5 17 15 16 1400
054501007 3/4” 31 6 18 24 16 850
054501010 1” 39 8 20 42 16 450
054501013 1.1/4” 48 10 22 70 16 250
054501015 1.1/2” 59 12 22 121 16 120
054501020 2” 74 15 26 230 16 80

059201
Fixed Flange
Threaded
Dp
G

Lt Z
S

Cod G Lt E H Dp S N Z Weight PN Pack


059201010 1” 20 115 23 85 14 4 3 148 16 144
059201013 1.1/4” 22 140 27 100 18 4 5 225 16 70
059201015 1.1/2” 22 150 32 110 18 4 10 276 16 60
059201020 2” 26 165 39 125 18 4 13 380 16 45
059201025 2.1/2” 29 185 47 145 18 4 18 659 16 25
059201030 3” 33 200 54 160 18 8 21 670 16 18
059201040 4” 40 220 64 180 18 8 24 900 16 12

32

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


PVC FITTINGS ACCESSORIES

054800
Nut for Unions:

G
E1
050800, 050801, 050802,
050803, 050804, 053602
H

Cod d G E E1 H Weight PN
054800016 16 3/4” 22 34 20 10 16
054800020 20 1” 27 42 23 18 16
054800025 25 1.1/4” 36 52 25 27 16
054800032 32 1.1/2” 41 59 27 35 16
054800040 40 2” 53 72 30 53 16
054800050 50 2.1/4” 57 79 34 70 16
054800063 63 2.3/4” 74 96 38 110 16
054800075 75 3.1/2” 93 118 46 190 10
054800090 90 4” 107 132 53 250 10
054800110 110 5” 125 151 59 430 10

055800
Bushimg for Union:

d
R

050800

Z I
H

Cod d R l Z H Weight PN
055800016 16 3/4” 14 9 23 10 16
055800020 20 1” 16 10 26 14 16
055800025 25 1.1/4” 19 10 29 20 16
055800032 32 1.1/2” 22 10 32 34 16
055800040 40 2” 26 12 38 61 16
055800050 50 2.1/4” 31 14 45 81 16
055800063 63 2.3/4” 38 14 52 132 16
055800075 75 3.1/2” 44 18 62 205 10
055800090 90 4” 51 18 69 296 10
055800110 110 5” 61 18 79 473 10

055801
Bushimg for Unions:
G
R

050801, 050802
Z Lt
H

Cod G R Lt Z H PN Weight
055801003 3/8” 3/4” 13 9 23 16 10
055801005 1/2” 1” 17 10 26 16 17
055801007 3/4” 1.1/4” 18 11 29 16 24
055801010 1” 1.1/2” 20 12 32 16 34
055801013 1.1/4” 2” 22 16 38 16 65
055801015 1.1/2” 2.1/4” 22 23 45 16 95
055801020 2” 2.3/4” 26 26 52 16 170
055801025 2.1/2” 3.1/2” 29 33 62 10 241
055801030 3” 4” 33 36 69 10 300
055801040 4” 5” 40 39 79 10 475

33

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


PVC FITTINGS ACCESSORIES

055803
B Lt

Mail Threaded
Union bush for items

R1

R
C
050803, 050804

Cod R R1 Lt C B Weight PN
055803007 3/4” 1.1/4” 17 40 12 20 16
055803010 1” 1.1/2” 22 45 13 34 16
055803013 1.1/4” 2” 22 46 16 61 16
055803015 1.1/2” 2.1/4” 22 50 16 81 16
055803020 2” 2.3/4” 26 65 16 132 16

056800
End for Unions:

E
050800, 050802, 050803
I Z
H

Cod d l Z E H Weight PN
05680016 16 14 2 24 16 10 16
05680020 20 16 3 30 19 14 16
05680025 25 19 3 39 22 20 16
05680032 32 22 3 44 25 34 16
05680040 40 26 3 55 29 61 16
05680050 50 31 3 62 34 81 16
05680063 63 38 3 78 41 132 16
05680075 75 44 4 97 48 205 10
05680090 90 51 5 110 56 296 10
05680110 110 61 5 135 66 473 10

056810
End for Unions:
050801, 050804

Cod G Lt Z E H Weight PN
05681003 3/8” 13 3 24 16 5 16
05681005 1/2” 17 3 30 20 10 16
05681007 3/4” 18 4 39 22 16 16
05681010 1” 20 5 44 25 23 16
05681018 1.1/4” 22 7 55 29 36 16
05681015 1.1/2” 22 12 62 34 60 16
05681020 2” 26 15 78 41 105 16
05681025 2.1/2” 29 19 97 48 135 10
05681030 3” 33 23 110 56 180 10
05681040 4” 40 26 135 66 310 10

34

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


PVC FITTINGS ACCESSORIES

056090 d

O-Ring for Item


055000

s
Cod d d s
05609025 16 - 3/8” 28,17 3,53
05609032 20 - 1/2” 36,1 3,53
05609040 25 - 3/4” 40,65 5,34
05609050 32 - 1” 50,16 5,34
05609063 40 - 1.1/4” 66,04 5,34
6325 50 - 1.1/2” 81,92 5,34
05609090 63 - 2” 100,97 5,34
05609110 75 - 2.1/2” 116,84 6,99
05609125 90 - 3” 135,9 6,99
05609140 110 - 4” 151,77 6,99
05609160 63 - 2” 177,17 6,99
05609200 110 - 4” 215,27 6,99
05609225 63 - 2” 240,67 6,99

056290 D

Seal for: d

055200, 053602
e

Cod ø d D e
05629016 16 17 24 2
05629020 20 21 30 2
05629025 25 27 38 2
05629032 32 32 44 2
05629040 40 42 55 2
05629050 50 46 62 2
05629063 63 63 88 2
05629075 75 75 104 2
05629090 90 90 123 2
05629110 110 110 148 3
05629125 125 125 166 3
05629140 140 140 186 3
05629160 160 160 211 3
05629200 200 200 245 3
05629225 225 225 270 3

35

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


PVC FITTINGS ACCESSORIES

056390 d

O-Ring for Unions


050800, 050801, 050802,

s
050803, 050804

Cod d d s
05639016 16 - 3/8” 16 2.62
05639020 20 - 1/2” 19 3.53
05639025 25 - 3/4” 27 3.53
05639032 32 - 1” 30 3.53
05639040 40 - 1.1/4” 44 3.53
05639050 50 - 1.1/2” 50 3.53
05639063 63 - 2” 59.7 5.34
*05630063 63 - 2” 60 3.53
05639075 75 - 2.1/2” 72 5.34
05639090 90 - 3” 91 5.34
05639110 110 - 4” 100 5.34

* O-Ring for Unions: 5083, 5084

36

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


VALVES
Normal Support
111500
Two Nut Valve
Cemented

Cod d l Z H F J K DN Weight PN Pack


11150016 16 14 43 71 45 65 45 10 93 16 160
11150020 20 16 43 75 45 65 45 15 103 16 160
11150025 25 19 51 89 54 73 55 20 201 16 90
11150032 32 22 58 102 66 78 66 25 281 16 50
11150040 40 26 68 120 74 96 80 32 475 16 40
11150050 50 31 80 142 86 110 96 40 672 16 28
11150063 63 38 93 169 106 129 118 50 1434 16 13

111510
Two Nut Valve
Threaded

Cod G Lt Z H F J K DN Weight PN Pack


11151003 3/8” 12 47 71 45 65 45 10 95 16 160
11151005 1/2” 15 45 75 45 65 45 15 105 16 160
11151007 3/4” 16 57 89 54 73 55 20 204 16 90
11151010 1” 19 64 102 66 78 66 25 284 16 50
11151013 1.1/4” 22 76 120 74 96 80 32 479 16 40
11151015 1.1/2” 22 98 142 86 110 96 40 681 16 28
11151020 2” 26 117 169 106 129 118 50 1439 16 13

37

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


VALVES
Normal Support
113500
One Nut Valve
Cemented

Cod d DN l Z J H F K Weight PN Pack


11350016 16 10 14 41 69 45 65 45 85 16 200
11350020 20 15 16 41 73 45 65 45 90 16 200
11350025 25 20 19 49 87 54 73 55 159 16 110
11350032 32 25 22 55 99 66 78 66 222 16 60
11350040 40 32 26 64 116 74 96 80 376 16 45
11350050 50 40 31 76 138 86 110 96 536 16 25
11350063 63 50 38 90 166 106 129 118 1109 16 15

113510
One Nut Valve
Threaded

Cod G DN l Z J H F K Weight PN Pack


11351003 3/8” 10 14 41 69 45 65 45 85 16 200
11351005 1/2” 15 16 41 73 45 65 45 90 16 200
11351007 3/4” 20 19 49 87 54 73 55 159 16 110
11351010 1” 25 22 55 99 66 78 66 222 16 60
11351013 1.1/4” 32 26 64 116 74 96 80 376 16 45
11351015 1.1/2” 40 31 76 138 86 110 96 536 16 25
11351020 2” 50 38 90 166 106 129 118 1109 16 15

113610
One Nut Valve
Male-Female-Threaded

Cod RxG Lt Z H F J K DN Weight PN Pack


11361003 3/8” 12 55 67 45 65 45 10 76 16 200
11361005 1/2” 15 57 72 45 65 45 15 82 16 200
11361007 3/4” 16 68 84 54 73 55 20 150 16 110
11361010 1” 19 79 98 66 78 66 25 214 16 60
11361013 1.1/4” 22 90 112 74 96 80 32 359 16 45
11361015 1.1/2” 22 108 130 86 110 96 40 504 16 25
11361020 2” 26 133 159 106 129 118 50 1086 16 15

38

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


VALVES
Threaded Support
111400
Two Nut Valve
Cemented

Cod d l Z H F J K DN Weight PN Pack


11140016 16 14 43 71 45 65 45 10 93 16 160
11140020 20 16 43 75 45 65 45 15 103 16 160
11140025 25 19 51 89 54 73 55 20 201 16 90
11140032 32 22 58 102 66 78 66 25 281 16 50
11140040 40 26 68 120 74 96 80 32 475 16 40
11140050 50 31 80 142 86 110 96 40 672 16 28
11140063 63 38 93 169 106 129 118 50 1434 16 13
11140075 75 44 137 215 128 132 139 65 2000 10 4
11140090 90 51 148 250 146 153 165 80 3250 10 2
11140110 110 61 173 295 173 185 207 100 6300 10 2

111410
Two Nut Valve
Threaded

Cod G Lt Z H F J K DN Weight PN Pack


11141003 3/8” 12 47 71 45 65 45 10 95 16 160
11141005 1/2” 15 45 75 45 65 45 15 105 16 160
11141007 3/4” 16 57 89 54 73 55 20 204 16 90
11141010 1” 19 64 102 66 78 66 25 284 16 50
11141013 1.1/4” 22 76 120 74 96 80 32 479 16 40
11141015 1.1/2” 22 98 142 86 110 96 40 681 16 28
11141020 2” 26 117 169 106 129 118 50 1439 16 13
11141025 2.1/2” 44 137 215 128 132 139 65 2000 10 4
11141030 3” 51 148 250 146 153 165 80 3250 10 2
11141040 4” 61 173 295 173 185 207 100 6300 10 2

39

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


VALVES
Threaded Support
112400-112700*
Bistop Valve - Cemented

4 7
112X00

Cod G DN l Z H F J K Weight PN Pack


112X0016 16 10 14 43 71 45 65 45 93 16 80
112X0020 20 15 16 43 75 45 65 45 103 16 80
112X0025 25 20 19 51 89 54 73 55 201 16 52
112X0032 32 25 22 58 102 66 78 66 281 16 30
112X0040 40 32 26 68 120 74 96 80 475 16 22
112X0050 50 40 31 80 142 86 110 96 672 16 13
112X0063 63 50 38 93 169 106 129 118 1434 16 6
112X0075 75 65 44 137 215 128 132 139 2000 10 4
112X0090 90 80 51 148 250 146 153 165 3250 10 2
112X0110 110 100 61 173 295 173 185 207 6300 10 2

* with FPM O-Ring


INDIVIDUALLY TESTED

112410-112710*
Bistop Valve - Threaded

4 7
112X10

Cod G DN l Z H F J K Weight PN Pack


112X1003 3/8” 10 12 47 71 45 65 45 95 16 80
112X1005 1/2” 15 15 45 75 45 65 45 105 16 80
112X1007 3/4” 20 16 57 89 54 73 55 204 16 52
112X1010 1” 25 19 64 102 66 78 66 284 16 30
112X1013 1.1/4” 32 22 76 120 74 96 80 479 16 22
112X1015 1.1/2” 40 22 98 142 86 110 96 681 16 13
112X1020 2” 50 26 117 169 106 129 118 1439 16 6
112X1025 2.1/2” 65 44 137 215 128 132 139 2000 10 4
112X1030 3” 80 51 148 250 146 153 165 3250 10 2
112X1040 4” 100 61 173 295 173 185 207 6300 10 2

* with FPM O-Ring


INDIVIDUALLY TESTED

40

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


VALVES
Threaded Support
113400
One Nut Valve
Cemented

Cod d DN l Z J H F K Weight PN Pack


11340016 16 10 14 41 69 45 65 45 85 16 200
11340020 20 15 16 41 73 45 65 45 90 16 200
11340025 25 20 19 49 87 54 73 55 159 16 110
11340032 32 25 22 55 99 66 78 66 222 16 60
11340040 40 32 26 64 116 74 96 80 376 16 45
11340050 50 40 31 76 138 86 110 96 536 16 25
11340063 63 50 38 90 166 106 129 118 1109 16 15
11340075 75 65 44 137 215 128 132 139 1800 10 6
11340090 90 80 51 148 250 146 153 165 2850 10 4
11340110 110 100 61 173 295 173 185 207 5300 10 2

113410
One Nut Valve
Threaded

Cod G DN l Z J H F K Weight PN Pack


11341003 3/8” 10 14 41 69 45 65 45 85 16 200
11341005 1/2” 15 16 41 73 45 65 45 90 16 200
11341007 3/4” 20 19 49 87 54 73 55 159 16 110
11341010 1” 25 22 55 99 66 78 66 222 16 60
11341013 1.1/4” 32 26 64 116 74 96 80 376 16 45
11341015 1.1/2” 40 31 76 138 86 110 96 536 16 25
11341020 2” 50 38 90 166 106 129 118 1109 16 15
11341025 2.1/2” 65 44 137 215 128 132 139 1800 10 6
11341030 3” 80 51 148 250 146 153 165 2850 10 4
11341040 4” 100 61 173 295 173 185 207 5300 10 2

41

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


VALVES
Threaded Support
113710
One Nut Valve
Threaded

Cod RxG Lt Z H F J K DN Weight PN Pack


11371003 3/8” 12 55 67 45 65 45 10 76 16 200
11371005 1/2” 15 57 72 45 65 45 15 82 16 200
11371007 3/4” 16 68 84 54 73 55 20 150 16 110
11371010 1” 19 79 98 66 78 66 25 214 16 60
11371013 1.1/4” 22 90 112 74 96 80 32 359 16 45
11371015 1.1/2” 22 108 130 86 110 96 40 504 16 25
11371020 2” 26 133 159 106 129 118 50 1086 16 15

J
113790
One Nut Valve
F

Female-Threaded-Compression
G
K
d

Lp Z Lt
H

Cod dxG Lt Z Lp H F J K DN Weight PN Pack


113790020 1/2” x 20 15 40 57 112 45 65 45 15 128 16 110
113790025 3/4” x 25 16 50 58 124 54 73 55 20 212 16 70
113790032 1” x 32 19 53 65 137 66 78 66 25 308 16 40
113790040 1.1/4” x 40 22 67 85 174 74 96 80 32 531 16 25
113790050 1.1/2” x 50 22 82 90 194 86 110 96 40 753 16 20
113790063 2” x 63 26 95 109 230 106 129 118 50 1463 16 10

42

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


VALVES
Threaded Support
111480
Two Nut Valve
PE End Connector

Cod d DN l Z J H F K Weight PN Pack


111480020 20 15 41 63 65 145 45 45 110 16 80
111480025 25 20 50 93 73 193 54 55 205 16 60
111480032 32 25 44 102 78 190 66 66 267 16 40
111480040 40 32 48 107 96 203 74 80 471 16 30
111480050 50 40 54 130 110 238 86 96 686 16 15
111480063 63 50 64 142 129 270 106 118 1418 16 10
*111480075 75 65 80 171 132 331 128 139 2000 10 4
*111480090 90 80 88 200 153 376 146 165 3250 10 3
*111480110 110 100 91 233 185 415 173 207 6300 10 1

* DELIVERY PROGRAM

113780 J

One Nut Valve


Compressor
F

PE End Connector
d

Lp Z l
H

Cod d DN l Z Lp H F J K Weight PN Pack


11378020 20 15 41 50 57 148 45 65 45 119 16 80
11378025 25 20 50 71 58 179 54 73 55 208 16 70
11378032 32 25 44 75 65 184 66 78 66 288 16 40
11378040 40 32 48 86,5 85 219,5 74 96 80 500 16 30
11378050 50 40 54 107 90 251 86 110 96 720 16 15
11378063 63 50 64 119,5 109 292,5 106 129 118 1440 16 10

43

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


CHECK VALVES

110800-110600
110900-110000
Check Valve
Cemented

8 6 9 0
110X00

Cod d l Z H F K Weight PN Pack


110X0016 16 14 43 71 23 45 90 16 80
110X0020 20 16 43 75 23 45 90 16 80
110X0025 25 19 51 89 29 55 145 16 52
110X0032 32 22 58 102 37 66 245 16 30
110X0040 40 26 68 120 44 80 410 16 22
110X0050 50 31 80 142 54 96 690 16 13
110X0063 63 38 93 169 65 118 1170 16 6
110X0075 75 44 137 215 108 139 1810 10 4
110X0090 90 51 148 250 125 165 3015 10 3
110X0110 110 61 173 295 148 207 5540 10 2

with FPM O-ring 110000


with EPDM O-ring 110600
with PTFE coated spring + EPDM O-rings 110800
with PTFE coated spring + FPM O-rings 110900

110810-110610
110910-110010
Check Valve
Threaded

8 6 9 0
110X10

Cod G l Z H F K DN Weight PN Pack


110X1003 3/8” 14 43 71 23 45 10 90 16 80
110X1005 1/2” 16 43 75 23 45 15 90 16 80
110X1007 3/4” 19 51 89 29 55 20 145 16 52
110X1010 1” 22 58 102 37 66 25 245 16 30
110X1018 1.1/4” 26 68 120 44 80 32 410 16 22
110X1015 1.1/2” 31 80 142 54 96 40 690 16 13
110X1020 2” 38 93 169 65 118 50 1170 16 6
110X1025 2.1/2” 44 137 215 108 139 65 1810 10 4
110X1030 3” 51 148 250 125 165 80 3015 10 3
110X1040 4” 61 173 295 148 207 100 5540 10 2

with FPM O-ring 110010


with EPDM O-ring 110610
with PTFE coated spring + EPDM O-rings 110810
with PTFE coated spring + FPM O-rings 110910

44

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


CHECK VALVES

050408
Kmocker Tee
Cemented

d
I Z I
H

Cod d l Z H Weight PN Pack


050408032 32 22 39 86 138 10 80
050408040 40 26 47 101 200 10 80
050408050 50 31 59 123 292 10 20
050408063 63 38 73 150 500 10 20

45

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


FOOT VALVES

116400-116000
Foot Valve
Cemented

4 0
116X00

Cod d DN l Z H F K Weight PN Pack


116X00016 16 10 14 43 71 23 45 93 16 80
116X00020 20 15 16 43 75 23 45 93 16 80
116X00025 25 20 19 51 89 29 55 155 16 52
116X00032 32 25 22 58 102 37 66 265 16 30
116X00040 40 32 26 68 120 44 80 465 16 22
116X00050 50 40 31 80 142 54 96 785 16 13
116X00063 63 50 38 93 169 65 118 1355 16 6
116X00075 75 65 44 137 215 108 139 2100 10 4
116X00090 90 80 51 148 250 125 165 3500 10 3
116X00110 110 100 61 173 295 148 207 6415 10 2

with EPDM O-ring 116400


with FPM O-ring 116000

116410-116010
Foot Valve
Threaded

4 0
116X10

Cod G DN Lt Z H F K Weight PN Pack


116X10003 3/8” 10 12 47 71 23 45 95 16 80
116X10005 1/2” 15 15 45 75 23 45 105 16 80
116X10007 3/4” 20 16 57 89 29 55 204 16 52
116X10010 1” 25 19 64 102 37 66 284 16 30
116X10013 1.1/4” 32 22 76 120 44 80 479 16 22
116X10015 1.1/2” 40 22 98 142 54 96 681 16 13
116X10020 2” 50 26 117 169 65 118 1439 16 6
116X10025 2.1/2” 65 44 137 215 108 139 2200 10 4
116X10030 3” 80 51 148 250 125 165 3600 10 3
116X10040 4” 100 61 173 295 148 207 6600 10 2

with EPDM O-ring 116410


with FPM O-ring 116010

46

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


AIR RELEASE VALVES

116300-116900
Air Release Valve
Cemented

3 9
116X00

Cod d DN l Z H F K Weight PN Pack


116X00016 16 10 14 43 71 23 45 88 16 80
116X00020 20 15 16 43 75 23 45 88 16 80
116X00025 25 20 19 51 89 29 55 145 16 52
116X00032 32 25 22 58 102 37 66 240 16 30
116X00040 40 32 26 68 120 44 80 405 16 22
116X00050 50 40 31 80 142 54 96 680 16 13
116X00063 63 50 38 93 169 65 118 1145 16 6
116X00075 75 65 44 137 215 108 139 2100 10 4
116X00090 90 80 51 148 250 125 165 3500 10 3
116X00110 110 100 61 173 295 148 207 6415 10 2

with EPDM O-ring 116300


with FPM O-ring 116900

116310-116910
Air Release Valve
Threaded

3 9
116X10

Cod G DN Lt Z H F K Weight PN Pack


116X10003 3/8” 10 12 47 71 23 45 88 16 80
116X10005 1/2” 15 15 45 75 23 45 88 16 80
116X10007 3/4” 20 16 57 89 29 55 145 16 52
116X10010 1” 25 19 64 102 37 66 240 16 30
116X10013 1.1/4” 32 22 76 120 44 80 405 16 22
116X10015 1.1/2” 40 22 98 142 54 96 680 16 13
116X10020 2” 50 26 117 169 65 118 1145 16 6
116X10025 2.1/2” 65 44 137 215 108 139 2200 10 4
116X10030 3” 80 51 148 250 125 165 3600 10 3
116X10040 4” 100 61 173 295 148 207 6600 10 2

with EPDM O-ring 116310


with FPM O-ring 116910

47

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


VALVES ACCESSORIES

111100
Valve Collar
Cemented

Cod d K H l Weight PN
11110016 16 33 20 14 9 16
11110020 20 33 20 16 9 16
11110025 25 40 22 19 25 16
11110032 32 50 26 22 20 16
11110040 40 61 30 26 41 16
11110050 50 73 34 31 68 16
11110063 63 94 42 38 114 16
11110075 75 119 47 44 174 10
11110090 90 143 56 51 300 10
11110110 110 165 67 61 492 10

111110
Valve Collar
Threaded

Cod G K H Lt Weight PN
11111003 3/8” 33 20 12 9 16
11111005 1/2” 33 20 16 9 16
11111007 3/4” 40 22 17 25 16
11111010 1” 50 26 20 20 16
11111018 1.1/4” 61 30 23 41 16
11111015 1.1/2” 73 34 23 68 16
11111020 2” 94 42 27 114 16
11111025 2.1/2” 119 47 32 174 10
11111030 3” 143 56 35 300 10
11111040 4” 165 67 42 492 10

48

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


VALVES ACCESSORIES

11112
Blue Handles

Cod d E H L L1 L2 Weight
11112005 16-3/8” 22 22,15 61,7 24,2 37,5 11,2
11112005 20-1/2” 22 22,15 61,7 24,2 37,5 11,2
11112007 25-3/4” 24 25,2 72 29,5 42,5 16
11112010 32-1” 26,5 30 77,5 30 47,5 20,2
11112013 40-1.1/4” 31 32,1 94 37,4 56,6 30
11112015 50-1.1/2” 35 34,9 107,8 42 65,8 38,6
11112020 63-2” 41,5 38 130 52,6 77,3 60,4
11112025 75-2.1/2” 45,3 38 132,8 54,9 77,9 77,2
11112030 90-3” 51,2 42,9 152,7 63 89,7 117,8
11112040 110-4” 56,5 47,3 185,7 75,9 109,1 168,8

11113
Red Handles

Cod d E H L L1 L2 Weight
11112005 16-3/8” 22 22,15 61,7 24,2 37,5 11,2
11112005 20-1/2” 22 22,15 61,7 24,2 37,5 11,2
11112007 25-3/4” 24 25,2 72 29,5 42,5 16
11112010 32-1” 26,5 30 77,5 30 47,5 20,2
11112013 40-1.1/4” 31 32,1 94 37,4 56,6 30
11112015 50-1.1/2” 35 34,9 107,8 42 65,8 38,6
11112020 63-2” 41,5 38 130 52,6 77,3 60,4
11112025 75-2.1/2” 45,3 38 132,8 54,9 77,9 77,2
11112030 90-3” 51,2 42,9 152,7 63 89,7 117,8
11112040 110-4” 56,5 47,3 185,7 75,9 109,1 168,8

49

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


VALVES ACCESSORIES

111140
Valve Nut

Cod G E E1 H Weight PN
11114016 16-3/8” 29 45 18 16 16
11114020 20-1/2” 29 45 18 16 16
11114025 25-3/4” 34 55 21 27 16
11114032 32-1” 41 66 26 46 16
11114040 40-1.1/4” 52 80 29 75 16
11114050 50-1.1/2” 65 96 36 133 16
11114063 63-2” 79 118 40 198 16
11114075 75-2.1/2” 96 139 52 282 10
11114090 90-3” 117 165 59 436 10
11114110 110-4” 142 207 68 830 10

1115.207 h

PE End Connector
K

l
H

Cod d K h H I W Weight
1115.207.020 20 33 5 53 41 11 11
1115.207.025 25 40 6 77 50 24 24
1115.207.032 32 49 6 68 44 33 33
1115.207.040 40 60 7 71 48 48 48
1115.207.050 50 73 9 82 54 85 85
1115.207.063 63 91 10 90 64 130 130
*1115.207.075 75 110 7 105 80 222 222
*1115.207.090 90 134 8 119 88 348 348
*1115.207.110 110 163 10 127 91 590 590

* DELIVERY PROGRAM

50

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


VALVES ACCESSORIES
Set of 0-Rings
115 / 125 / 128 / 135 / 134

O-Ring For Stem


valve code 111500/1 Ø 16 -63 set 115 valve code 111400/1 Ø 16-110 set 125
valve code 112400/1 Ø 16 - 110 set 125 valve code 112700/1 Ø 16-110* set 128
valve code 113500/1 Ø 16 -63 set 135 valve code 113400/1 Ø 16-110 set 134
valve code 113610 Ø 16 -63 set 135 valve code 113710 Ø 16 -63 set 134
valve code 113790 Ø 20 -63 set 134 valve code 113780 Ø 16 -63 set 134
valve code 111480 Ø 20 -63 set 125 valve code 111480 Ø 20 -63 set 125

16-3/8" 20-1/2" 25-3/4" 32-1" 40-11/4" 50-11/2" 63-2" 75-21/2" 90-3" 110-4"
7219 7219 952 114 3043 356 467 475 487 134
Type 1
7,2x1,9 7,2x1,9 9,5x2 11,11x1,78 10,78x2,72 13,95x2,62 17,04x3,53 18,64x3,53 21,82x3,53 25,8x3,53

O-Ring For Spacing


Normal Support Threaded Support
Valve code 111500/1 set 115 Valve code 111400/1 set 125
Valve code 113500/1 set 135 Valve code 112400/1 set 125
Valve code 113610 set 135 Valve code *112700/1 set 128
Valve code 113710 set 134
Valve code 113790 set 134
Valve code 113780 set 134
Valve code 111480 set 125

16-3/8" 20-1/2" 25-3/4" 32-1" 40-11/4" 50-11/2" 63-2" 75-21/2" 90-3" 110-4"
3075 3075 3100 4118 4150 6187 6237 6325 6387 119
Type 1
18,72x2,62 18,72x2,62 25,07x2,62 29,75x3,53 37,7x3,53 47x5,43 59,7x5,34 84,92x5,34 97,79x5,34 117,48x5,34
9999 9999 2093 2118 3143 3181 3231 4287 4350 4425
Type 2
17,5x1,5 17,5x1,5 23,52x1,78 29,87x1,78 36,17x2,62 45,7,2,62 58,42x2,62 72,62x3,53 88,5x3,53 107,5x3,53
130 130 3118 4150 152 161 174
Type 3
22,23x2,62 22,23x2,62 29,83x2,62 37,7x3,53 47,62x3,53 57,15x3,53 71,63x3,53
130 130 3118 3143 3181 3231 174 4362 6450 217
Type 4
22,23x2,62 22,23x2,62 29,83x2,62 36,17x2,62 45,7x2,62 58,42x2,62 71,63x3,53 91,67x3,53 113,7x5,34 142,9x5,34
PTFE020 PTFE020 PTFE025 PTFE032 PTFE040 PTFE050 PTFE063 PTFE075 PTFE090 PTFE110
Type 5
15x21x3 15x21x3 20x27x3,5 25x33x4 32x42x5 40x51x5,5 50x63x6,5 65x82x6 80,5x95,6x7,5 100,5x116x9

O-Ring For Body


Only for compression side valves

16-3/8" 20-1/2" 25-3/4" 32-1" 40-11/4" 50-11/2" 63-2" 75-21/2" 90-3" 110-4"
3075 3075 3100 4118 4150 6187 6237 6325 6387 119
Type 1
18,72x2,62 18,72x2,62 25,07x2,62 29,75x3,53 37,7x3,53 47x5,43 59,7x5,34 84,92x5,34 97,79x5,34 117,48x5,34
9999 9999 2093 2118 3143 3181 3231 4287 4350 4425
Type 2
17,5x1,5 17,5x1,5 23,52x1,78 29,87x1,78 36,17x2,62 45,7,2,62 58,42x2,62 72,62x3,53 88,5x3,53 107,5x3,53

Type 3 070020020 070020025 070020032 070020040 070020050 070020063

PTFE020 PTFE020 PTFE025 PTFE032 PTFE040 PTFE050 PTFE063 PTFE075 PTFE090 PTFE110
Type 5
15x21x3 15x21x3 20x27x3,5 25x33x4 32x42x5 40x51x5,5 50x63x6,5 65x82x6 80,5x95,6x7,5 100,5x116x9
* Set of FPM O-Rings
51

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


VALVES ACCESSORIES
CHECK - FOOT - AIR - RELEASE VALVES
Set of 0-Rings
*100 / 106

Gasket For Piston


valve code 110800/1 Ø 16 -110 valve code 116300/1 Ø 16-110
valve code 110600/1 Ø 16 -110 valve code 116900/1 Ø 16-110*
valve code 110900/1 Ø 16 -110*
valve code 110000/1 Ø 16 -110*
valve code 116400/1 Ø 16 -110
valve code 116000/1 Ø 16 -110*

16-3/8" 20-1/2" 25-3/4" 32-1" 40-11/4" 50-11/2" 63-2" 75-21/2" 90-3" 110-4"
*GP020V *GP020V *GP025V *GP032V *GP040V *GP050V *GP063V *GP075V *GP090V *GP090V
Type 1
12,5x20x2 12,5x20x2 17x24x2 22x32x2 38x28x3 51x35x4 58x42x4 57x77x4 72x93x4 110x90x4

O-Ring For Spacing


Normal Support

16-3/8" 20-1/2" 25-3/4" 32-1" 40-11/4" 50-11/2" 63-2" 75-21/2" 90-3" 110-4"
130 130 3118 3143 3181 3231 174 4362 6450 4562
Type 2
22,23x2,62 22,23x2,62 29,83x2,62 36,17x2,62 45,7x2,62 58,42x2,62 71,63x3,53 91,67x3,53 113,7x5,34 142,47x3,53
3075 3075 3100 4118 4150 6187 6237 6325 6387 119
Type 3
18,72x2,62 18,72x2,62 25,07x2,62 29,75x3,53 37,7x3,53 47x5,43 59,7x5,34 84,92x5,34 97,79x5,34 117,48x5,34

O-Ring For Body

16-3/8" 20-1/2" 25-3/4" 32-1" 40-11/4" 50-11/2" 63-2" 75-21/2" 90-3" 110-4"
3075 3075 3100 4118 4150 6187 6237 6325 6387 119
Type 3
18,72x2,62 18,72x2,62 25,07x2,62 29,75x3,53 37,7x3,53 47x5,43 59,7x5,34 84,92x5,34 97,79x5,34 117,48x5,34

Spring
Stainiess steel 316 core Spring Teflon coated onstanless steel 316
core Spring

16-3/8" 20-1/2" 25-3/4" 32-1" 40-11/4" 50-11/2" 63-2" 75-21/2" 90-3" 110-4"

Type 4 ML020 ML020 ML025 ML032 ML040 ML050 ML063 ML075 ML090 ML110

* Set of FPM O-Rings


52

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


TECHNICAL SPECIFICATIONS - FITTINGS
Product Description

DESCRIPTION - JOINTING TYPES -


Precision moulded pressure pipe fittings and flanges made The fittings and the valves are available with three types of
from PVC-U250 suitable for PVC pipe systems up to 16 bar. connections:
Our comprehensive range of items and sizes can be joined Plain ends for solvent cement jointing to pressure pipes of
either by cold solvent cementing or through threading. metric dimensions.
Sizes and dimensions conform to international standard. Fourth digit in the catalogue no. is “O” (XXXO).
All fittings are suitable for potable water, beverges, and food Threaded ends to be screwed onto BSP threaded pipes/
contact, as well as corrosive* fluid transports. fittings.
* For specific chemicals, please consult your sales rep. Fourth digit in the catalogue no. is “1” (XXX1).
A combination of ends (”adaptor fittings”) suitable for
STANDARDS - joining a PVC pipeline of the metric dimensions to a BSP
Products conform to the requirments of ISO 264, 727, 2536, threaded pipe, fitting, valve or accessory (PVC or other
3460, KIWA Criteria Std. Nr. 54 and DIN 8063, 19532, materials).
UNI EN 1452-3, AFNOR 54-029 and 54-028. Fourth digit in the catalogue no. is “2” (XXX2).

MATERIALS - SIZES -
PVC-U250 unplasticized poly (vinyl chloride) meeting the For standard pipes of the ISO metrical range: 12, 16, 20, 25,
above mentioned Standards. 32, 40, 50, 63, 75, 90, 110, 125, 140, 160, 200, 225mm.
Injection-moulded components: PVC-U250. And for pipes of the BSP threaded range: 1/4”, 3/8”, 1/2”,
Metal reinforced rings: on the female threads INOX AISI 430. 3/4”, 1”, 11/4”, 11/2”, 2”, 21/4”, 3”, 4” ,5”.
Gaskets and O-Rings: EPDM.
THREADS -
PLASSON fittings are female threaded (cylindrical) and male
MARKINGS - threaded (conical) in accordance with ISO, BS 21, and UNI
The fittings and valves incorporate the following information 339 standards.
moulded in relief:
FLANGES -
- PLASSON Trade Mark (registered in most countries) PLASSON backing flanges are to be used in connection with
the flange adaptors (catalogue no. 5500, 5510, and 5520).
- Diameter of connection The number, sizes and distance between the centre of the
holes conform to UNI 2223, EN 1452-3, ISO 2536 and DIN
- Nominal pressure 8063 for pressure classes of 10-16 Bar.
- Type of Material ACCESSORIES -
The fitting range is completed by some accessories such as
COLOUR - solvent cement, primer, PTFE tape, etc.
All fittings and valves are grey, in accordance with PVC-U
pressure pipeline standards. WORKING TEMPERATURES -

ITEMS -
CELSIUS 0°-25° 25°-30° 30°-35° 35°-40° 40°-45°
Sockets, 45o and 90o Elbows, 90o Tees, Bushes, Unions,
Reducers, Adaptors, Hose Nozzles, Caps, Plugs, Nipples, PFA* (PN) Bar 16 14,4 12,8 11,2 10
Flanges, Flange Adaptors, Ball Valves, Foot Valves, Check PFA* (PN) Bar 10 9 8 7 6,25
Valves, and Air Release Valves.
* in accordance with EN 805
SANITARY LAWS -
The PLASSON fittings and valves conform to the sanitary laws
and regulations in force in the various European Countries PRESSURES -
and in the U.S. relating to transportation of potable water, The fittings and valves, in accordance with EN 805 standard,
wine, beverages and food. have three working pressures: PTA (PA), PMA and PEA.
To every PFA values are connected the following PMA and
PEA:
APPLICATION FIELDS -
Potable water systems, irrigation systems (including
fertilization), installation for wine, beer, beverages and
PFA -PA PMA PEA
other fluids, industrial plants, conveyence of acids,
bases, salts, fresh or swimming water, ship installlations. PRESSURES
16 20 24
(for special installations, please contact your Plasson IN BAR
10 12,5 15
supplier). 6 7,5 9

53

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


TECHNICAL SPECIFICATIONS - FITTINGS
Product Description

PVC PROPERTIES - SYMBOLS & DEFINITIONS FITTINGS -


The following are the required properties for injection moulded
PVC-U250 fittings and valves in accordance with ISO-EN-UNI PN - Nominal Pressure in Bar - Allowable operating
Standards: pressure conveying water at 20OC during 50 years.

PFA - Allowable Operating Pressure - Maximum


CHARACTERISTICS UNITS VALUES STANDARDS hydrostatic pressure that a component is capable of
Density at 23°C Kg/dm3 1.39 ISO 1183
withstanding continuously in service (EN 805:1999); for
Vicat 5 Kg. o
C 77 ISO 306 water at temperatures up to 25OC: PFA=PN.
Tensile impact strength KJ/m2 ≤513 ISO 527
Tensile strength at break MPa ≤49 ISO 527 PMA - Allowable Maximum Operating Pressure
Elongation at break % ≤120 ISO 527
- Maximum pressure occurring from time to time, including
surge, that a component is capable of withstanding in service
Yield stress MPa 46 ISO 527
(EN 805:1999).
Flexural modulus MPa ≤3000 ISO 527
Heat conductivity at 23 oC W/mK 0,13-0,19 ASTM C 177
PEA - Allowable Site Test Pressure - Maximum
Specific heat at 23 oC J/Kg K 900-1000 -
hydrostatic pressure that a newly installed component is
Fire resistance (0,85 mm.) V0 UL 94
capable of withstanding for a relatively short duration, in
order to ensure the integrity and tightness of the pipeline (EN
805:1999).
Permissable working pressures in accordance
with DIN8062 MRS: Minimum Required Strength

25 PVC-U: Unplasticized Poly (vinyl chloride)

20 PVC-U250: Unplasticized Poly (vinyl chloride)


material for injectionmoulded components,
Pressure in bars

10°C such as PLASSON fittings and valves, with a


15 20°C
proved MRS-value of at least 25Mpa.
30°C
10 40°C
EPDM: Ethylene Propylene Rubber

50°C FPM: Fluoride Rubber (VITON)


5
60°C
PTFE: Polytetrafluoroethylene
0
1 5 10 25 50
Time in years

ABBREVIATIONS USED IN THIS CATALOGUE -

d, d1 Nominal inside diameter


G, G1 Nominal size of thread in inches
DN Nominal bore
D, D1 Outside diameter
E, E1 Maximum overall external diameter
1, 11 Internal length of cementing
L, L1, L2 External length for cementing
Lt, Lt1 Length of thread
Z Length from pipe stop to centre/other pipe stop
C External size of octagon
B Length of rim
Dp Pitch circle diameter of bolt holes in flanges
S Diameter of bolt holes in flanges
N Number of bolt holes in flange
e Cross section diameter of O-Ring
H Total length
W Weight in grams

54

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


TECHNICAL SPECIFICATIONS - VALVES
Product Description

DESCRIPTION - SIZES -
Precision moulded valves made from uPVC suitable for line For standard pipes of the ISO metrical range of mm: 16, 20,
pipe systems up to 16 bar. Our comprehensive range of items 25, 32, 40, 50, 63, 75, 90, 110
and sizes can be connected either by cold solvent cementing And for pipes of the BSP threaded range: 3/8”, 1/2”, 3/4”,
or through threading. Sizes and dimensions conform to 1”, 11/4”, 11/2”, 2”, 21/2”, 3”
international standards. All valves are suitable for potable
water, beverages, food as well as corrosive fluid transport. THREADS -
PLASSON valves are female threaded (cylindrical) and male
MATERIALS - threaded (conical) according with ISO 7, UNI 339, DIN
PVC-U250 (unplasticized polyvinyl chloride) meeting the 2999 and BS 21 standards.
standards of DIN-BS-UNI-AFNOR, KIWA, etc
MECHANICAL PROPERTIES -
O-Rings - Maximum working pressure in bars:
1) EPDM (ethylene-propylene copolymer). Hardness: 70 Δ16-63: PN16
shore, unless otherwise specified Δ75-110: PN10
2) FPM (Fluorised-Rubber) Hardness: 70 shore, unless Minumun pressure TEE Clapet: 0,2bar
otherwise specified Minumun opening pressure Check Valves: 0,5bar

Springs - PVC PROPERTIES -


1) PTFE coated stainless steel 316 core The following are the required properties for an injection
2) Coated Springs: Teflon coated on stainless steel 316 core moulded PVC fittings withstanding pressures PN16 in
accordance with UNI standards:
Gaskets (on ball) -
1) PTFE (Polytetra Fluorised-Ethylene)
2) PE CHARACTERISTICS UNITS VALUES STANDARDS
Density Kg/m3 1.4 ISO 1183
MARKINGS -
Vicat (50N) o
C 76 ISO 306-B
The valves incorporate the following information moulded in
Yield stress MPa 45 ISO 527
relief:
Tensile Strength at break (230) MPa 40 ISO 527
Plasson Trade Mark (registered in most countries)
Elongation at break % 120 ISO 527
Diameter of connection
Nominal pressure Tensile Modulus MPa 3000 ISO 527
Type of Material

COLOUR - Unnotched j/m Notched j/m


All valves are grey, in accordance with PVC-U pressure
pipeline standards. IZOD Impact ASTM 23 Co
NB 270
Strength D256 0oC NB 150
Handles are blue or red.
ISO180 0oC <1500 70
ITEMS -
Ball Valves, Check Valves, Foot Valves, Air Release Valves
Permissable working pressures in accordance
SANITARY LAWS - with DIN8062
The PLASSON valves conform to the sanitary laws and
regulations in force in the various European Countries and in 25
the U.S. relating to transportation of potable water, wine,
beverages and food.
20

APPLICATION FIELDS -
Pressure in bars

10°C
Potable water systems, irrigation systems (including 15 20°C
fertilization), installation for wine, beer, beverages and other
30°C
fluids, industrial plants, conveyence of acids, bases, salts, 40°C
10
fresh or swimming water pool, ship installlations. (for special
installations, please contact your Plasson supplier).
50°C
5
60°C
JOINTING TYPES -
The valves are available with three types of connections: Plain
0
ends for solvent cement jointing to pressure pipes of metric
1 5 10 25 50
dimensions. Fourth digit in the catalogue no. is “O” (XXXO). Time in years
Threaded ends to be screwed onto BSP threaded pipes/
fittings. Fourth digit in the catalogue no. is “1” (XXX1).

55

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


TECHNICAL SPECIFICATIONS - VALVES
Product Description

ABBREVIATIONS USED IN THIS CATALOGUE -

d Nominal inside diameter


F Distance from centre of valve to top of handle or valve
G Nominal size of thread in inches
J Length of handle
K Outside diameter or nut
DN Nominal bore corresponding approx to the inside diameter of the pipe
D Outside diameter
I Internal length for cementing
L External length for cementing
Lp Internal length to PE pipe
Lt Length of thread
Z Length from pipe stop to centre/other pipe stop
H Total length
W Weight in grams

SYMBOLS & DEFINITIONS FITTINGS -

PN - Nominal Pressure in Bar - Allowable operating


pressure conveying water at 20OC during 50 years.

PFA - Allowable Operating Pressure - Maximum


hydrostatic pressure that a component is capable of
withstanding continuously in service (EN 805:1999); for
water at temperatures up to 25OC: PFA=PN.

PMA - Allowable Maximum Operating Pressure


- Maximum pressure occurring from time to time, including
surge, that a component is capable of withstanding in service
(EN 805:1999).

PEA - Allowable Site Test Pressure - Maximum


hydrostatic pressure that a newly installed component is
capable of withstanding for a relatively short duration, in
order to ensure the integrity and tightness of the pipeline (EN
805:1999).

MRS: Minimum Required Strength

PVC-U: Unplasticized Poly (vinyl chloride)

PVC-U250: Unplasticized Poly (vinyl chloride)


material for injectionmoulded components,
such as PLASSON fittings and valves, with a
proved MRS-value of at least 25Mpa.

EPDM: Ethylene Propylene Rubber

FPM: Fluoride Rubber (VITON)

PTFE: Polytetrafluoroethylene

56

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


ASSEMBLY INSTRUCTIONS
Normal Support

111500 Instructions for connection to support (8) and PTFE gasket (7*) using a
111510 1 the system - suitable tool in order to prevent damage.
A) Completely unscrew the ring nuts (12) Remove the ball (4) which was previously
2 and fit them to the pipe that the valve is positioned during the closing phase.
3 to be connected to. Remove the stem (3) by pushing downwards
5
B) Either glue or screw couplings (10) at and extracting it from inside the valve body.
6 9
the pipe ends. Remove the O-Ring (2*) from the stem (3)
8 C) Position the valve body (5) between using a suitable tool.
11
7 12
the two couplings. Remove the O-Ring (9*) and the PTFE
12
10
11
10
D) Lock the ring nuts for both sides. gasket (7*) using a suitable tool.
To assemble the valve, follow the same
Instructions for disassembling procedure in the opposite sequence.
4
and reassemble -
Completely unscrew the ring nuts (12). Notes: The valve shall be supplied
Remove the valve body (5) radially. with a pre-set radial seal, applicable
Remove the handle (1) by pulling upwards. to average operating conditions; due
Release the gasket support (8) by pushing to particular operating conditions, it
the ball (4) through the valve while the might be necessary to turn clockwise or
valve is closed. anticlockwise the ring nuts (12) from the
Remove O-Rings (6*, 9*, 11*) from gasket side of the gasket support (8).

113500 1 Instructions for connection to support (8) and PTFE gasket (7*) using a
the system - suitable tool in order to prevent damage.
113510
2 A) Completely unscrew the ring nut (12) Remove the ball (4) which was previously
and fit it to the pipe that the valve is to be positioned during the closing phase.
3 connected to. Remove the stem (3) by pushing
B) Either glue or screw fixed side (5) to downwards and extracting it from inside
5 the pipe end. the valve body.
9
6 C) Either glue or screw coupling (10) to Remove the O-Ring (2*) from the stem (3)
8 the pipe end. using a suitable tool.
7
11 D) Lock the ring nut. Remove the O-Ring (9*) and the PTFE
10 gasket (7*) using a suitable tool.
12 Instructions for disassembling To assemble the valve, follow the same
and reassemble - procedure in the opposite sequence.
Completely unscrew the ring nut (12).
Remove the valve body (5) radially. Notes: The valve shall be supplied with
4 Remove the handle (1) by pulling upwards. a pre-set radial seal, applicable to average
Release the gasket support (8) by pushing operating conditions; due to particular
the ball (4) through the valve while the operating conditions, it might be necessary
valve is closed. to turn clockwise or anticlockwise the ring
Remove O-Rings (6*, 9*, 11*) from gasket nut (12).

113610 1
Instructions for connection to suitable tool in order to prevent damage.
the system - Remove the ball (4) which was previously
2 A) Completely unscrew the ring nut (12) positioned during the closing phase.
and fit it to the pipe that the valve is to be Remove the stem (3) by pushing
3 connected to. downwards and extracting it from inside
B) Screw fixed side (5) to the pipe end. the valve body.
5
C) Screw coupling (10) to the pipe end. Remove the O-Ring (2*) from the stem (3)
9
6
D) Lock the ring nut. using a suitable tool.
11
8
7 Remove the O-Ring (9*) and the PTFE
10 Instructions for disassembling gasket (7*) using a suitable tool.
12 and reassemble - To assemble the valve, follow the same
Completely unscrew the ring nut (12). procedure in the opposite sequence.
Remove the valve body (5) radially.
Remove the handle (1) by pulling upwards. Notes: The valve shall be supplied
4
Release the gasket support (8) by pushing with a pre-set radial seal, applicable
the ball (4) through the valve while the to average operating conditions; due
valve is closed. to particular operating conditions, it
Remove O-Rings (6*, 9*, 11*) from gasket might be necessary to turn clockwise or
support (8) and PTFE gasket (7*) using a anticlockwise the ring nut (12).

57

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


ASSEMBLY INSTRUCTIONS
Threaded Support

111400 Instructions for connection to Remove the ball (4) which was previously
111410 1 the system - positioned during the closing phase.
A) Completely unscrew the ring nuts (12) Remove the stem (3) by pushing
2
and fit them to the pipe that the valve is to downwards and extracting it from inside
be connected to. the valve body.
3
B) Either glue or screw couplings (10) at Remove the O-Ring (2*) from the stem (3)
9
5
the pipe ends. using a suitable tool.
6 C) Position the valve body (5) between the Remove the O-Ring (9*) and the PTFE
two couplings. gasket (7*) using a suitable tool.
8 7
11 12

12
10 10 D) Lock the ring nuts for both sides. To assemble the valve, follow the same
11 procedure in the opposite sequence.
Instructions for disassembling
and reassemble - Notes: The valve shall be supplied with
4 Completely unscrew the ring nuts (12). a pre-set radial seal, applicable to average
Completely unscrew the ring nuts (12). operating conditions; due to particular
Remove the valve body (5) radially. operating conditions, it might be necessary
Remove the handle (1) by pulling upwards. to follow the instructions below before
Insert the key in its seat in the gasket performing the final step:
support (8). 1. Disconnected the handle (1) by pulling
Completely unscrew the gasket support (8) upwards.
by rotating the handle anticlockwise. 2. Insert the key in its seat in the gasket
Remove O-Rings (6*, 9*, 11*) from gasket support (8).
support (8) and PTFE gasket (7*) using a 3. Turn clockwise or anticlockwise to adjust
suitable tool in order to prevent damage. as required.

112400-112410 Instructions for connection to Remove the ball (4) which was previously
112700-112710 the system - positioned during the closing phase.
A) Completely unscrew the ring nuts (12) Remove the stem (3) by pushing downwards
and fit them to the pipe that the valve is and extracting it from inside the valve body.
1
to be connected to. Remove the O-Ring (2*) from the stem (3)
B) Either glue or screw couplings (10) at using a suitable tool.
2
the pipe ends. Remove the O-Ring (9*) and the PTFE
C) Position the valve body (5) between gasket (7*) using a suitable tool.
the two couplings. To assemble the valve, follow the same
3

9
5 D) Lock the ring nuts for both sides. procedure in the opposite sequence.
6
8
11
7 12
Instructions for disassembling Notes: The valve shall be supplied with
10
10
and reassemble - a pre-set radial seal, applicable to average
12
11 Completely unscrew the ring nuts (12). operating conditions; due to particular
Remove the valve body (5) radially. operating conditions, it might be necessary
Remove the handle (1) by pulling upwards. to follow the instructions below before
4 Insert the key in its seat in the gasket performing the final step:
support (8). 1. Disconnected the handle (1) by pulling
Completely unscrew the gasket support (8) upwards.
by rotating the handle anticlockwise. 2. Insert the key in its seat in the gasket
Remove O-Rings (6*, 9*, 11*) from gasket support (8).
support (8) and PTFE gasket (7*) using a 3. Turn clockwise or anticlockwise to adjust as
suitable tool in order to prevent damage. required.

58

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


ASSEMBLY INSTRUCTIONS
Threaded Support

113400 Instructions for connection to Remove the ball (4) which was previously
the system - positioned during the closing phase.
113410 1
A) Completely unscrew the ring nut (12) Remove the stem (3) by pushing downwards
and fit it to the pipe that the valve is to be and extracting it from inside the valve body.
2
connected to. Remove the O-Ring (2*) from the stem (3)
B) Either glue or screw fixed side (5) to using a suitable tool.
3 the pipe end. Remove the O-Ring (9*) and the PTFE
5
C) Either glue or screw coupling (10) to gasket (7*) using a suitable tool.
the pipe end. To assemble the valve, follow the same
9
D) Lock the ring nut. procedure in the opposite sequence.
6
8
11 7
10 Instructions for disassembling Notes: The valve shall be supplied with
12 and reassemble - a pre-set radial seal, applicable to average
Completely unscrew the ring nut (12). operating conditions; due to particular
Remove the valve body (5) radially. operating conditions, it might be necessary
Remove the handle (1) by pulling upwards. to follow the instructions below before
4 Insert the key in its seat in the gasket performing the final step:
support (8). 1. Disconnected the handle (1) by pulling
Completely unscrew the gasket support (8) upwards.
by rotating the handle anticlockwise. 2. Insert the key in its seat in the gasket
Remove O-Rings (6*, 9*, 11*) from gasket support (8).
support (8) and PTFE gasket (7*) using a 3. Turn clockwise or anticlockwise to adjust
suitable tool in order to prevent damage. as required.

113710 Instructions for connection to Remove the stem (3) by pushing


1
the system - downwards and extracting it from inside
A) Completely unscrew the ring nut (12) the valve body.
2
and fit it to the pipe that the valve is to be Remove the O-Ring (2*) from the stem (3)
connected to. using a suitable tool.
3 B) Screw fixed side (5) to the pipe end. Remove the O-Ring (9*) and the PTFE
5
C) Screw coupling (10) to the pipe end. gasket (7*) using a suitable tool.
9 D) Lock the ring nut. To assemble the valve, follow the same
6 procedure in the opposite sequence.
8
11
7
Instructions for disassembling
10
and reassemble - Notes: The valve shall be supplied
12
Completely unscrew the ring nut (12). with a pre-set radial seal, applicable to
Remove the valve body (5) radially. average operating conditions; due to
Remove the handle (1) by pulling upwards. particular operating conditions, it might
4 Insert the key in its seat in the gasket support (8). be necessary to follow the instructions
Completely unscrew the gasket support (8) below before performing the final step:
by rotating the handle anticlockwise. 1. Disconnected the handle (1) by pulling
Remove O-Rings (6*, 9*, 11*) from gasket upwards.
support (8) and PTFE gasket (7*) using a 2. Insert the key in its seat in the gasket
suitable tool in order to prevent damage. support (8).
Remove the ball (4) which was previously 3. Turn clockwise or anticlockwise to
positioned during the closing phase. adjust as required.

59

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


ASSEMBLY INSTRUCTIONS
Threaded Support

113790 Instructions for connection to suitable tool in order to prevent damage.


the system - Remove the ball (4) which was previously
A) Connect PE pipe to the compression positioned during the closing phase.
1
nut (19). Remove the stem (3) by pushing downwards
B) Completely unscrew the ring nuts (12) and extracting it from inside the valve body.
2
and fit them to the pipe that the valve is Remove the O-Ring (2*) from the stem (3)
3
to be connected to. using a suitable tool.
C) Either glue or screw couplings (10) at Remove the O-Ring (9*) and the PTFE
9
5
the pipe ends. gasket (7*) using a suitable tool.
8
6
D) Position the valve body (5) between To assemble the valve, follow the same
7

10
11
19 the two couplings. procedure in the opposite sequence.
12 18 E) Lock the ring nuts for both sides.
Notes: The valve shall be supplied with
17

Instructions for disassembling a pre-set radial seal, applicable to average


and reassemble - operating conditions; due to particular
4
Completely unscrew the ring nuts (12). operating conditions, it might be necessary
Remove the valve body (5) radially. to follow the instructions below before
Remove the handle (1) by pulling upwards. performing the final step:
Insert the key in its seat in the gasket 1. Disconnected the handle (1) by pulling
support (8). upwards.
Completely unscrew the gasket support (8) 2. Insert the key in its seat in the gasket
by rotating the handle anticlockwise. support (8).
Remove O-Rings (6*, 9*, 11*) from gasket 3. Turn clockwise or anticlockwise to adjust
support (8) and PTFE gasket (7*) using a as required.

60

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


ASSEMBLY INSTRUCTIONS
Threaded Support

111480 Instructions for connection to Remove the ball (4) which was previously
1
the system - positioned during the closing phase.
A) Completely unscrew the ring nuts (12) Remove the stem (3) by pushing downwards
2
and fit them to the pipe that the valve is to and extracting it from inside the valve body.
be connected to. Remove the O-Ring (2*) from the stem (3)
B) Either connect to the compression using a suitable tool.
3

5 fittings or electrofuse or butt weld PE Remove the O-Ring (9*) and the PTFE
9 spigots (20) at the pipe ends. gasket (7*) using a suitable tool.
8
6
7
C) Position the valve body (5) between the To assemble the valve, follow the same
two couplings. procedure in the opposite sequence.
11
20 12

12
20
D) Lock the ring nuts for both sides.
11
Notes: The valve shall be supplied with
Instructions for disassembling a pre-set radial seal, applicable to average
and reassemble - operating conditions; due to particular
4 Completely unscrew the ring nuts (12). operating conditions, it might be necessary
Remove the valve body (5) radially. to follow the instructions below before
Remove the handle (1) by pulling upwards. performing the final step:
Insert the key in its seat in the gasket support (8). 1. Disconnected the handle (1) by pulling
Completely unscrew the gasket support (8) upwards.
by rotating the handle anticlockwise. 2. Insert the key in its seat in the gasket
Remove O-Rings (6*, 9*, 11*) from gasket support (8).
support (8) and PTFE gasket (7*) using a 3. Turn clockwise or anticlockwise to adjust
suitable tool in order to prevent damage. as required.

113780 Instructions for connection to suitable tool in order to prevent damage.


the system - Remove the ball (4) which was previously
A) Connect PE pipe to the compression positioned during the closing phase.
nut (19). Remove the stem (3) by pushing
B) Completely unscrew the ring nuts (12) downwards and extracting it from inside
1 and fit them to the pipe that the valve is the valve body.
to be connected to. Remove the O-Ring (2*) from the stem (3)
C) Either connect to the compression using a suitable tool.
2

3
fittings or electrofuse or butt weld the PE Remove the O-Ring (9*) and the PTFE
5 spigots (20) at the pipe ends. gasket (7*) using a suitable tool.
6
9 D) Position the valve body (5) between To assemble the valve, follow the same
11
8
7
the two couplings. procedure in the opposite sequence.
20
18
19
E) Lock the ring nuts for both sides.
Notes: The valve shall be supplied with
12
17

Instructions for disassembling a pre-set radial seal, applicable to average


and reassemble - operating conditions; due to particular
4 Completely unscrew the ring nuts (12). operating conditions, it might be necessary
Remove the valve body (5) radially. to follow the instructions below before
Remove the handle (1) by pulling upwards. performing the final step:
Insert the key in its seat in the gasket 1. Disconnected the handle (1) by pulling
support (8). upwards.
Completely unscrew the gasket support (8) 2. Insert the key in its seat in the gasket
by rotating the handle anticlockwise. support (8).
Remove O-Rings (6*, 9*, 11*) from gasket 3. Turn clockwise or anticlockwise to adjust
support (8) and PTFE gasket (7*) using a as required.

61

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


ASSEMBLY INSTRUCTIONS
Check Valves

110800-110600-110900-110000 Instructions for connection to and the spring assisted piston (15) does
110810-110610-110910-110010 the system - not fall out .
A) Completely unscrew the ring nuts (12) Remove the the spring assisted piston (15).
12 and fit them to the pipe that the valve is to To replace valve reverse the procedure
be connected to. being careful to set the O-Ring properly
10

11

13
B) Either glue or screw couplings (10) at and grease it with silicon grease.
14
the pipe ends.
15 C) Position the valve body (5) between the
21
17
two couplings.
16
D) Lock the ring nuts for both sides.
11

10

12
Instructions for disassembling
and reassemble -
Completely unscrew the ring nuts (12).
Remove the valve body (13) radially.
Release the gasket support (16) by pushing
it and making sure that the spring (17)

12
116300-116900 Instructions for connection to pushing it.
10
116310-116910 11
the system - Remove the the spring assisted piston (15).
A) Completely unscrew the ring nuts (12) To replace valve reverse the procedure
13
and fit them to the pipe that the valve is being careful to set the O-Ring properly
22
to be connected to. and grease it with silicon grease.
14
21 B) Either glue or screw couplings (10) at
11
16
the pipe ends.
10 C) Position the valve body (5) between
12 the two couplings.
D) Lock the ring nuts for both sides.

Instructions for disassembling


and reassemble -
Completely unscrew the ring nuts (12).
Remove the valve body (13) radially.
Release the gasket support (16) by

116400-116000 12 Instructions for connection to pushing it.


116410-116010 10 the system - Remove the the spring assisted piston (15).
11 A) Completely unscrew the ring nuts (12) To replace valve reverse the procedure
13
and fit them to the pipe that the valve is being careful to set the O-Ring properly
14
to be connected to. and grease it with silicon grease.
22 B) Either glue or screw couplings (10) at
16
21
the pipe ends.
11 C) Position the valve body (5) between
10 the two couplings.
12
D) Lock the ring nuts for both sides.

Instructions for disassembling


and reassemble -
Completely unscrew the ring nuts (12).
Remove the valve body (13) radially.
Release the gasket support (16) by

62

NKI NEEDE / TEL. 0545-293515 / FAX 0545-293967 / WWW.NKINEEDE.NL


LEIDINGSYSTEMEN
UNIEK IN LEIDINGTECHNIEK

Postbus 80 - 7160 AB Neede


Parallelweg 80 - 7161 AG Neede
Telefoon 0545-293515 - Fax 0545-293967
E-mail: [email protected]
www.nkineede.nl

60160679
LEIDINGSYSTEMEN
UNIEK IN LEIDINGTECHNIEK

Via Gallinea, 28 - 16010 Mele (GE) Italy


Tel. +39 010 63.19.015 Fax. +39 010 63.19.171
email: [email protected] - www.mgmeccanoplastica.eu

You might also like