Scribd Logo
Upload

Welcome to Scribd!

  • 320 views

    11Kv Starter For Chillers

    Uploaded by

    togirishsharma
    The document discusses the Softstart MV DS digital soft-starter, which is designed for controlled starting and stopping of large medium voltage motors up to 6.6kV. Such large motors generate huge torques and currents when started directly, which can damage machinery. The soft-starter controls the starting torque smoothly to maintain current below limits, protecting the drive installation and machinery. It can be customized with options like slip-ring control and has a heavy-duty design to allow high starting capacity without derating.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    11Kv Starter For Chillers

    Uploaded by

    togirishsharma
    320 views4 pages
    The document discusses the Softstart MV DS digital soft-starter, which is designed for controlled starting and stopping of large medium voltage motors up to 6.6kV. Such large motors generate huge torques and currents when started directly, which can damage machinery. The soft-starter controls the starting torque smoothly to maintain current below limits, protecting the drive installation and machinery. It can be customized with options like slip-ring control and has a heavy-duty design to allow high starting capacity without derating.

    Original Description:

    Starter GA for chillers

    Original Title

    11Kv Starter for Chillers

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document discusses the Softstart MV DS digital soft-starter, which is designed for controlled starting and stopping of large medium voltage motors up to 6.6kV. Such large motors generate huge torques and currents when started directly, which can damage machinery. The soft-starter controls the starting torque smoothly to maintain current below limits, protecting the drive installation and machinery. It can be customized with options like slip-ring control and has a heavy-duty design to allow high starting capacity without derating.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    320 views4 pages

    11Kv Starter For Chillers

    Uploaded by

    togirishsharma
    The document discusses the Softstart MV DS digital soft-starter, which is designed for controlled starting and stopping of large medium voltage motors up to 6.6kV. Such large motors generate huge torques and currents when started directly, which can damage machinery. The soft-starter controls the starting torque smoothly to maintain current below limits, protecting the drive installation and machinery. It can be customized with options like slip-ring control and has a heavy-duty design to allow high starting capacity without derating.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    The Softstart MV DS digital soft-starter

    The UK’s first 2.3 / 11kV high power soft-starter


    The Softstart MV DS digital soft-starter
    Designed for the controlled starting – and stopping – of large medium
    voltage motors up to 6.6kV with 11kV models in development.

    Such motors generate huge torques and draw enormous currents when started direct-on-line and
    auto-transformer starting is expensive, bulky and provides only a moderate solution.

    Controlled starting by precise digital voltage control offers the smoothest starting torque
    solution, maintaining the line current below current limit levels. This not only protects the
    whole drive installation but also protects the driven machinery from excessive torque surges
    that can cause substantial damage and expensive plant downtime.
    Custom built to your needs

    The MV DS is designed to host a


    wide variety of options, enabling
    it to be customised to the client’s
    precise needs. Slip-ring motors can
    be accommodated by incorporating a
    rotor shorting resistor package, bi-
    directional motor control is available
    and power factor correction is offered,
    along with 110V or 230V control.
    Cable entry can be accommodated
    from the bottom, the top or the rear
    and internal and external cable boxes
    can be incorporated in the design.

    Power when you need it

    Standards The MV DS is a heavy-duty fully-


    ISO 9001 : 2008 Quality Standard rated design, allowing a start capacity
    IEC 60470 : 2000 Vacuum Contactors of up to 400% FLC for 30secs at a
    IEC 60228 : Class 5 High Voltage Cables rated temperature of 50°C without
    UCI 895, BSS 6195 Type 5 High Voltage Cable Dielectric Strength derating. Designed for arduous
    IEC 60332-2 IEEE 383 High Voltage Cable Fire Propagation environments, a comprehensive motor
    EN 62271 : 2004 Part 200 High Voltage Switchgear and Control Gear protection package is included and
    IEC 60694 : 1996 Common Specification for High Voltage Switchgear a motor insulation test facility is
    IEC 60270 : 2000 High Voltage Test Techniques
    offered as an option. Variations in the
    supply voltage are catered for by a
    IEC 60071 : 1996 Insulation Co-ordination
    45- 65Hz tracking capability and the
    EN 50178 : 1998 Electronic Equipment for use in power installation
    construction is designed for corrosive
    IEC 60664 : 2007 Insulated coordination within low voltage systems.
    environments. Tacho feedback
    IEC 61238 : 2003 Cable Lugs (High Voltage)
    enables uneven torque loads, such
    2006/95/EC Low Voltage Directive
    as encountered on crushers and long
    CE Certificate of Incorporation.
    conveyors, to be smoothly controlled,
    IEC 61000-6-2 Electromagnetic Compatibility - Immunity protecting the plant as a whole.
    IEC 61000-6-3 Electromagnetic Compatibility – Emission
    Type test certification
    Simple Control and Monitoring

    For precise and simplified control and


    monitoring, the MV DS is digitally
    controlled via a powerful industrial
    PC, mounted on the cabinet door.
    The full colour 8.4” (12.1” optional)
    display enables the engineer to
    commission the starter quickly
    and simply and thereafter to see
    exactly what is happening with the
    plant. Ethernet and Modbus control
    SoftStart HMI
    control unit facilitates full remote monitoring and
    control in a wide variety of languages.
    Softstart MV DS digital soft-starter
    The UK’s first 2.3 / 11kV high power soft-starter

    SPECIFICATIONS
    System Output Motor Dimensions (mm) Stack Total
    Voltage Current Power Weight Weight
    (Vac) (Amps) (kW) * Length Depth Height (kg) (kg) **

    60 200
    110 360 90 360
    200 660 1520 760 2025
    2300 320 1060 130 400
    400 1330 160 430
    600 2000 200 470
    720 2400 1710 760 2025 350 690

    60 280
    110 520
    200 950 1520 760 2025 140 410
    3300 320 1530
    400 1910 200 470
    600 2850 250 520
    720 3440 1710 760 2025 400 740

    60 360
    110 660 140 410
    200 1200 1520 760 2025
    4160 320 1930 150 420
    400 2410 180 450
    600 3610 195 465
    720 4330 1710 760 2025 450 790

    70 670
    140 1340 250 570
    250 2390 1710 760 2025
    6600 300 2870
    400 3820 300 620
    500 4780
    700 6740 2090 950 2025 450 790

    * kW sizes are for indication only.


    ** Total weights are estimated and may vary depending upon components used.

    Softstart (UK) Ltd


    14 Brinell Way
    Harfreys Industrial Estate Tel: +44 (0)1493 660510
    Great Yarmouth Fax: +44 (0)1493 660511
    Norfolk, NR31 0LU [email protected] www.softstartuk.com

    You might also like