Tickopur R 33 GB Stamm

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

9

Product information TICKOPUR R 33


Universal-Cleaner for the ultrasonic bath
Concentrate - mildly alkaline - with corrosion protection
EXAM-expertise No.: 5734/06
For cleaning and degreasing of machines and their components, tools, equipment and parts in industry,
handicraft and laboratories. For cleaning of heavily soiled respirators (face masks) and protective work
equipment.
TICKOPUR R 33 has been especially designed for cleaning in SONOREX ultrasonic cleaning units, as well as for
cleaning by immersion, wiping or high pressure techniques.
If used properly, a fast and gentle cleaning is achieved.

TICKOPUR R 33 removes:
common soiling, grinding-, polishing- and metals, also light metals, glass, ceramics,
lapping-residues, oily and greasy residues, from plastics, rubber, windows, glasses, E-filters,
dust, soot, ink etc. respirators (face masks) etc.

Properties Material compatibility


 liquid TICKOPUR R 33 has a high material compatibility.
 highly concentrated Parts made of tin and zinc may be damaged. We
 for ultrasonic application recommend testing the resistance of sensitive
 pH 9.9 at 1% materials before cleaning.
 with corrosion protection The material compatibility of TICKOPUR R 33 in the
 EXAM-expertise for ultrasonic application ultrasonic bath on face masks of MSA Auer has been
certified by an expertise of EXAM "centre of
 biodegradable
competence" for breathing protection.
Application
Chemical and physical data
Application with ultrasound appearance: clear, colourless liquid
dosage: 3-5% density: 1.13 g/ml
sonication time: 1 - 10 minutes viscosity: 5.4 mPas
temperature: 20 - 80 °C temperature stability: -6 to 100 °C
Application without ultrasound shelf life: >6 years
dosage: 1 - 10 % pH-value: 9.9 at 1 %
immersion time: up to 12 hours
temperature: 20 - 80 °C Ecology
The contained surfactants are biodegradable
Information for application according to Regulation (EC) No. 648/2004 on
Make sure the surface of objects is completely detergents. Used solutions can be let into the
immersed. Hollow objects have to be immersed in a sewerage after neutralisation to a pH-value of 6.5 to
way that air can completely escape from the cavities. 9.5 and dilution with the quadruple amount of water if
Concentration and time of application depend on the contaminations allow this. The national and local
type and degree of contamination. regulations concerning sewerage have to be
After cleaning, rinse parts thoroughly with water. For observed.
spotless drying, rinse with demineralised water. Completely rinsed jerrycans, bottles and barrels may
Respirators (face masks) and protective work be recycled via national plastic recycling systems.
equipment have to be cleaned according to the
manufacturers specifications. Delivery range / dosing aids
1 litre PE-bottle Order No. 830
Composition 2 litres PE-handle-bottle Order No. 883
TICKOPUR R 33 contains: 5 - 15 % anionic tensides, 5 litres PE-jerrycan Order No. 831
5 - 15 % phosphate, <5 % non-ionic tensides, 25 litres PE-jerrycan Order No. 835
<5 % silicate, complexing agents. 200 litres PE-barrel Order No. 837
Classification according CLP Dosing pump for 5- and 25-litres-jerrycan
Signal word: Danger, GHS05, H315, H318. Dosing valves for 25-litres jerrycan

EC material safety data sheet available online as PDF download at: www.dr-h-stamm.info
These specifications are for information only. Subject to technical alterations in
composition and change in legal and other safety regulations.
9 GmbH Chemische Fabrik
Heinrichstraße 3 – 4 • 12207 Berlin • GERMANY
Tel.: +49 30 76880280 • Fax: +49 30 7734699
8338en-4/2017-03

You might also like