Samsung Secret

Product Information

DATE : 27. Jan. 2012

SAMSUNG TFT-LCD

MODEL :

The Information Described in this Specification is Preliminary and can be changed without
prior notice

LCD Business
Samsung Electronics Co . , LTD.

MODEL LSJ320AP04 Doc. No 07-000-G-20120127 Page 1/28

 Contents Samsung Secret

Revision History -------------------------------------------------------------------------------------------- (3)

General Description --------------------------------------------------------------------------------------- (4)

General Information --------------------------------------------------------------------------------------- (4)

1. Absolute Maximum Ratings -------------------------------------------------------------------------- (5)

2. Optical Characteristics --------------------------------------------------------------------------------- (6)

3. Electrical Characteristics ------------------------------------------------------------------------------ (9)

3.1 TFT LCD Module

4. Input Terminal Pin Assignment --------------------------------------------------------------------- (11)

4.1. Input Signal & Power
4.2 LVDS Interface
4.3 Input Signals, Basic Display Colors and Gray Scale of Each Color

5. Interface Timing ---------------------------------------------------------------------------------------- (14)

5.1 Timing Parameters
5.2 Timing Diagrams of interface Signal
5.3 Power ON/OFF Sequence

6. Outline Dimension -------------------------------------------------------------------------------------- (17)

7. Packing --------------------------------------------------------------------------------------------------- (18)

7.1 CARTON(Internal Package)
7.2 Packing Specification

8. Marking & Others ------------------------------------------------------------------------------------- (20)

9. General Precaution ----------------------------------------------------------------------------------- (21)

9.1 Handling
9.2 Storage
9.3 Operation
9.4 Operation Condition Guide
9.5 Others

MODEL LSJ320AP04 Doc. No 07-000-G-20120127 Page 2/28

 Samsung Secret
Revision History

Date Rev. No Page Summary

27.Jan.2012 000 all First issued

MODEL LSJ320AP04 Doc. No 07-000-G-20120127 Page 3/28

General Description Samsung Secret

Description
LSJ320AP04 is a color active matrix liquid crystal display (LCD) that uses amorphous
silicon TFT( Thin Film Transistor) as switching components. This model is composed of a
TFT LCD panel, a driver circuit. The resolution of a 32“ is 1366 x 768 and this model can
display up to 16.7 Million colors with wide viewing angle of 89° or higher in all directions.
This panel is intended to support applications to provide a excellent performance for Flat
Panel Display such as Home-alone Multimedia TFT-LCD TV and High Definition TV.

Features
 High contrast Ratio & aperture ratio with wide color gamut
 SVA (Super Vertical Align) mode
 Wide viewing angle (±178°)
 High speed response
 HD resolution (16:9)
 LVDS (Low Voltage Differential Signaling) interface

General Information

Items Specification Unit Note

713.0(H) x 412.8(V) ±1.0mm

Panel Size mm
1.76(D) Max

Weight 1.2(Max) kg
Pixel Pitch 0.51075(H) X 0.17025(V) mm
Active Display Area 697.6845(H) X 392.256(V) mm
Surface Treatment Haze 2%, Hard-coating (2H)

Display Colors 8 Bits-True, 16.7 M colors

Number of Pixels 1366 X 768 pixel

Pixel Arrangement RGB vertical stripe
Display Mode Normally Black

MODEL LSJ320AP04 Doc. No 07-000-G-20120127 Page 4/28

 Samsung Secret

1. Absolute Maximum Ratings

If the condition exceeds maximum ratings, it can cause malfunction or unrecoverable
damage to the device.
(VSS = 0 V)

Item Symbol Min. Max. Unit Note

Power Supply Voltage VDD 10.8 13.2 V (1)

Storage temperature TSTG 5 40 ℃ (2)

Glass surface
temperature Center TOPR 0 50 ℃ (2)
(Operation)

Note (1) Ta= 25 ± 2 °C

(2) Temperature and relative humidity range are shown in the figure below.
a. 90 % RH Max. (Ta ≤ 39 °C)
b. Relative Humidity is 90% or less. (Ta > 39 °C)
c. No condensation

MODEL LSJ320AP04 Doc. No 07-000-G-20120127 Page 5/28

 Samsung Secret
2. Optical Characteristics

The optical characteristics should be measured in a dark room or equivalent.

Measuring equipment : TOPCON RD-80S, D65 ,ELDIM EZ-Contrast

(Ta = 25 ± 2°C, VDD=12V)

Item Symbol Condition Min. Typ. Max. Unit Note

Contrast Ratio (1)

C/R 3,000 4,000 -
(Center of screen) D65

Response (3)
G-to-G Tg - 10 16 msec
Time RD-80S

Rx Normal 0.640
Red
Ry qL,R=0 0.330
qU,D=0
Gx 0.300
Green Viewing
Color Gy 0.600
Angle TYP. TYP. (5),(6)
Chromaticity
Bx -0.03 0.150 +0.03 D65
(CIE 1931)
Blue
By 0.060
Wx 0.280
White
Wy 0.290
sRGB Concordance - - 98.5 - % (5)
Color Temperature - - 10,000 - K D65

qL 75 89 -
Hor.
Viewing qR 75 89 - (6)
C/R≥10 Degree EZ-
Angle qU 75 89 - Contrast
Ver.
qD 75 89 -

Notice

(a) Test Equipment Setup

The measurement should be executed in a stable, windless and dark room between
40min and 60min after operating the Panel at the given temperature for stabilization
of the standard light(SEC use standard illuminant D65 Media).
This should be measured in the center of screen. Environment condition : Ta = 25 ± 2 °C

MODEL LSJ320AP04 Doc. No 07-000-G-20120127 Page 6/28

 Samsung Secret

Photo detector
Photo detector Field

SR3 1°
RD-80S 2° Field

BM-5A : 50㎝
RD-80S : 50㎝
EZ-Contrast:0㎝
TFT - LCD Module
LCD Panel

The center of the screen

- Definition of test point

320 960 1600

Active Area
180 ⑨ ⑧ ⑦
Test Point
540 ⑥ ⑤ ④

900 ③ ② ①

Note (1) Definition of Contrast Ratio (C/R)

: Ratio of gray max (Gmax) & gray min (Gmin) at the center point ⑤ of the panel
: The measurement goes in D65 Standard Light Source

G max
C/R
G min
Gmax : Luminance with all pixels white
Gmin : Luminance with all pixels black

MODEL LSJ320AP04 Doc. No 07-000-G-20120127 Page 7/28

 Samsung Secret

Note (2) Definition of Response time : Sum of Tr, Tf

Display data Black (data off) White (data on) Black (data off)

TR TF
Optical Instruments
100%
Response
90%

10%
0%
TIME
※ G-to-G : Average response time between Gray to Gray (Scale)

Note (3) Definition of Color Chromaticity (CIE 1931)

Color coordinate of Red, Green, Blue & White at center point ⑤
The measurement goes in D65 Standard Light Source

Note (4) Definition of Viewing Angle

: Viewing angle range (C/R ≥10)
The measurement goes in D65 Standard Light Source

MODEL LSJ320AP04 Doc. No 07-000-G-20120127 Page 8/28

 Samsung Secret
3. Electrical Characteristics

3.1 TFT LCD Module

The connector for display data & timing signal should be connected.
Ta = 25°C ± 2 °C
Item Symbol Min. Typ. Max. Unit Note
Voltage of Power Supply VDD 10.8 12.0 13.2 V (1)
(a) Black - 365 830 mA
Current
of Power (b) White IDD - 370 830 mA (2),(3)
Supply
(c) N-pattern - - 1600 mA
Vsync Frequency fV 48 60 66 Hz
Hsync Frequency fH 44 48 53 kHz
Main Frequency Fdclk 72 78 85 MHz
Rush Current IRUSH - - 4 A (4)

Note (1) The ripple voltage should be controlled under 10% of VDD.
(2) fV= 60 Hz, fDCLK = 78 MHz, VDD = 12.0V, DC Current.
(3) Power dissipation check pattern (LCD Module only)
a) Black Pattern b) White Pattern c) N-pattern

(4) Measurement Conditions

VDD
100%
90%

10%
GND

TRUSH=470㎲
Rush Current IRUSH can be measured when TRUSH. is 470㎲.

MODEL LSJ320AP04 Doc. No 07-000-G-20120127 Page 9/28

4. Input Terminal Pin Assignment Samsung Secret
4.1. Input Signal & Power Connector : YOUNHO 30Pin, SMD-A
PIN SYMBOL FUNCTION
1 WPN WPN
2 SCL
I2C interface
3 SDA
4 GND GND
5 LV0_N
LVDS
6 LV0_P
7 GND GND
8 LV1_N negative LVDS differential data input (0)
9 LV1_P positive LVDS differential data input (0)
10 GND GND
11 LV2_N negative LVDS differential data input (1)
12 LV2_P positive LVDS differential data input (1)
13 GND GND
14 LVCLK_N negative LVDS differential data input (Clock)
15 LVCLK_P positive LVDS differential data input (Clock)
16 GND GND
17 LV3_N negative LVDS differential data input (3)
18 LV3_P positive LVDS differential data input (3)
19 GND GND
20 AGING_ENI AGING OPTION (Low: Active)
21 LVDS_SEL LVDS OPTION (Low: JEIDA, High: VESA)
22 WPN WPN
23 GND
GND
24 GND
25 N.C
26 VIN
27 VIN
28 VIN Power Supply : +12V
29 VIN
30 VIN

Note1) No Connection: These PINS are used only for SAMSUNG. (DO NOT CONNECT)

MODEL LSJ320AP04 Doc. No 07-000-G-20120127 Page 10/28

 Samsung Secret

Note(1) Pin number starts from Bottom side

PCB

#1▼ #30 #1▼ #10

#1 #30 #1 #10

Fig. Connector diagram

a. Power GND pins should be connected to the LCD’s metal chassis.

b. All power input pins should be connected together.
c. All NC pin should be separated from other signal or power.

MODEL LSJ320AP04 Doc. No 07-000-G-20120127 Page 11/28

 Samsung Secret
4.2 LVDS Interface
- LVDS Receiver : Tcon (merged) - Data Format (JEIDA)
LVDS pin JEIDA -DATA

TxIN/RxOUT0 R2

TxIN/RxOUT1 R3

TxIN/RxOUT2 R4

TxOUT/RxIN0 TxIN/RxOUT3 R5

TxIN/RxOUT4 R6

TxIN/RxOUT6 R7

TxIN/RxOUT7 G2

TxIN/RxOUT8 G3

TxIN/RxOUT9 G4

TxIN/RxOUT12 G5

TxOUT/RxIN1 TxIN/RxOUT13 G6

TxIN/RxOUT14 G7

TxIN/RxOUT15 B2

TxIN/RxOUT18 B3

TxIN/RxOUT19 B4

TxIN/RxOUT20 B5

TxIN/RxOUT21 B6

TxOUT/RxIN2 TxIN/RxOUT22 B7

TxIN/RxOUT24 HSYNC

TxIN/RxOUT25 VSYNC

TxIN/RxOUT26 DEN

TxIN/RxOUT27 R0

TxIN/RxOUT5 R1

TxIN/RxOUT10 G0

TxOUT/RxIN3 TxIN/RxOUT11 G1

TxIN/RxOUT16 B0

TxIN/RxOUT17 B1

TxIN/RxOUT23 RESERVED

MODEL LSJ320AP04 Doc. No 07-000-G-20120127 Page 12/28

 Samsung Secret
4.3 Input Signals, Basic Display Colors and Gray Scale of Each Color

Note) Definition of Gray :

Rn : Red Gray, Gn : Green Gray, Bn : Blue Gray (n = Gray level)
Input Signal : 0 = Low level voltage, 1 = High level voltage

MODEL LSJ320AP04 Doc. No 07-000-G-20120127 Page 13/28

 Samsung Secret
5. Interface Timing

5.1 Timing Parameters ( Timing-Controller )

SIGNAL ITEM SYMBOL MIN. TYP. MAX. Unit NOTE

Clock 1/TC 72 78 85 MHz

Hsync Frequency FH 44 48 53 KHz

Vsync FV 48 60 66 HZ

Active
Display TVD - 768 - Lines
Vertical Period
Display Term
Vertical
TVB 776 802 1200 Lines
Total

Active
Display THD - 1366 - Clocks
Horizontal Period
Display Term
Horizontal
TH 1480 1624 2000 clocks
Total

Note) This product is DE only mode. The input of Hsync & Vsync signal does
not have an effect on normal operation.
(1) Test Point : TTL control signal and CLK at LVDS Tx input terminal in system
(2) Internal VDD = 3.3V
(3) Spread spectrum
- Modulation rate (max) : ± 1.5 %
- Modulation Frequency : 30 ~ 300KHz

MODEL LSJ320AP04 Doc. No 07-000-G-20120127 Page 14/28

 Samsung Secret
5.2 Timing diagrams of interface signal ( DE only mode )

TV

TVD

DE

TH

THD

DE

DCLK
TC

DATA
SIGNALS

MODEL LSJ320AP04 Doc. No 07-000-G-20120127 Page 15/28

 Samsung Secret

5.3 Power ON/OFF Sequence

To prevent a latch-up or DC operation of the LCD Module, the power on/off

sequence should be as the diagram below.

0.5ms<T1≤10ms
1ms<T2≤50ms
0ms<T3≤50ms
1000ms≤T4

1000ms≤T5

100ms≤T6

T1 : VDD rising time from 10% to 90%

T2 : The time from VDD to valid data at power ON.
T3 : The time from valid data off to VDD off at power Off.
T4 : VDD off time for Windows restart
T5 : The time from valid data to B/L enable at power ON.
T6 : The time from valid data off to B/L disable at power Off.

 The supply voltage of the external system for the Module input should be the same
as the definition of VDD.
 Apply the lamp voltage within the LCD operation range. When the back light turns on
before the LCD operation or the LCD turns off before the back light turns off,
the display may momentarily show abnormal screen.
 In case of VDD = off level,
please keep the level of input signals low or keep a high impedance.
 T4 should be measured after the Module has been fully discharged between power off
and on period.
 Interface signal should not be kept at high impedance when the power is on.

MODEL LSJ320AP04 Doc. No 07-000-G-20120127 Page 16/28

ACTIVE CENTER
 Samsung Secret
7. PACKING

7.1 CARTON (Internal Package)

(1) Packing Form Corrugated fiberboard box and corrugated cardboard as shock absorber
(2) Packing Method

Packing- Upper Box

Pallet Tray 7EA

10EA 10EA
10EA

Pallet-Plastic

7.2 Packing Specification

ITEM Specification Remark

1. 1.20 Kg / LCD (7[ea]/Tray, 140[ea]/Pallet)

2. 0.04 Kg / Middle sheet (8[ea]/Tray, 160[ea]/Pallet)
LCD Packing 140ea / Box
3. 2.00 Kg / Panel tray-Bottom (20ea/Pallet)
4. 0.50 Kg / Palel tray-Top (2ea)

1. 23 Kg / Pallet-Plastic (1ea)
Pallet-Wood 1Box / Pallet
2. 2.00 Kg / Packing Pallet-Box(1ea)

Pallet size H x V x height 1,475mm(H) x 1,150mm(V) x 1,131mm(height)

Pallet(23kg) + Panel tray(40kg) + Panel(168kg)

Total weight 240.4 kg
+ Middle sheet(6.4Kg) + Packing Box (3kg)

MODEL LSJ320AP04 Doc. No 07-000-G-20120127 Page 18/28

 Samsung Secret
8. MARKING & OTHERS

A nameplate bearing followed by is affixed to a shipped product at the specified

location on each product.

(1) Cell Label

LSJ320AP04

Lot number : X X X X XXX XX X

Cell Position No. (In the Glass)

Glass No. (In the one Lot)
Lot No. (Glass)
Month
Year (Note1)
Product code
Line

MODEL LSJ320AP04 Doc. No 07-000-G-20120127 Page 19/28

 Samsung Secret

(2) Box Label

LSJ320AP04
xxxx
140

MODEL LSJ320AP04 Doc. No 07-000-G-20120127 Page 20/28

9. General Precautions Samsung Secret

9.1 Handling

(a) When the Module is assembled, it should be attached to the system firmly
using all mounting holes. Be careful not to twist and bend the Module.

(b) Refrain from strong mechanical shock and / or any force to the Module.
In addition to damage, this may cause improper operation or damage to the Module
and CCFL back light.

(c) Note that polarizers are very fragile and could be damage easily.
Do not press or scratch the surface harder than a HB pencil lead.

(d) Wipe off water droplets or oil immediately. If you leave the droplets for a long
time, staining or discoloration may occur.

(e) If the surface of the polarizer is dirty, clean it using absorbent cotton or soft cloth.

(f) Desirable cleaners are water, IPA(Isopropyl Alcohol) or Hexane.

Do not use Ketone type materials(ex. Acetone), Ethyl alcohol, Toluene, Ethyl acid
or Methyl chloride. It might permanent damage to the polarizer due to chemical
reaction.

(g) If the liquid crystal material leaks from the panel, it should be kept away
from the eyes or mouth . In case of contact with hands, legs or clothes, it must
be washed away with soap thoroughly.

(h) Protect the module from Electrostatic discharge. Otherwise the ASIC IC or
Semiconductor would be damaged.

(i) Use finger-stalls with soft gloves in order to keep display clean during the
incoming inspection and assembly process.

(k) Protection film for polarizer on the Module should be slowly peeled off just before use
so that the electrostatic charge can be minimized. Must put on antistatic glove while
handle a module

(l) Pins of I/F connector should not be touched directly with bare hands.

MODEL LSJ320AP04 Doc. No 07-000-G-20120127 Page 21/28

* Process Control Standard Samsung Secret

Item Management standard value and performance standard

1 Anti-static mat (shelf) 1 to 50 [Mohm]

Anti-static mat (floor,

2 1 to 100 [Mohm]
desk)

3 Ionizer Attenuate from ± 1,000V to ± 100V within 2 sec

4 Anti-static wrist band 0.8 to 10 [Mohm]

Anti-static wrist band

5 entry and ground Below 1,000 [ohm]
resistance

6 Temperature 0 ∼ 35℃
7 Humidity 60 to 70 [%RH]

MODEL LSJ320AP04 Doc. No 07-000-G-20120127 Page 22/28

 Samsung Secret
9.2 Storage

We highly recommend to comply with the criteria in the table below

ITEM Unit Min. Max.

Storage
(℃) 5 40
Temperature
Storage
(%rH) 35 75
Humidity

Storage life 6 months

- The storage room should provide good ventilation and temperature control.
- Products should not be placed on the floor, but on the Pallet away from
a wall.
- Prevent products from direct sunlight, moisture nor water; Be cautious of
Storage a build up of condensation.
- Avoid other hazardous environment while storing goods.
Condition

After 1 month 2 month 3 month 4month 5 month 6month

Baking No backing 50℃ 10% 24Hr 50℃ 10% 48Hr

9.3 Operation

(a) Do not connect or disconnect the Module in the "Power On" condition.

(b) Power supply should always be turned on/off by the "Power on/off sequence"

(c) Module has high frequency circuits. Sufficient suppression to the electromagnetic
interference should be done by system manufacturers. Grounding and shielding methods
may be important to minimize the interference.

(d) The cable between the back light connector and its inverter power supply should
be connected directly with a minimized length. A longer cable between
the back light and the inverter may cause lower luminance of lamp(CCFT) and
may require higher startup voltage(Vs).

MODEL LSJ320AP04 Doc. No 07-000-G-20120127 Page 23/28

 Samsung Secret
9.4 Operation Condition Guide

(a) The LCD product should be operated under normal conditions.

Normal condition is defined as below;
- Temperature : 20±15℃
- Humidity : 55±20%
- Display pattern : continually changing pattern (Not stationary)

(b) If the product will be used in extreme conditions such as high temperature,
humidity, display patterns or operation time etc.., It is strongly recommended
to contact SEC for Application engineering advice. Otherwise, its reliability and
function may not be guaranteed. Extreme conditions are commonly found at
Airports, Transit Stations, Banks, Stock market, and Controlling systems.

9.5 Others

(a) Ultra-violet ray filter is necessary for outdoor operation.

(b) Avoid condensation of water. It may result in improper operation or disconnection

of electrode.

(c) Do not exceed the absolute maximum rating value. ( supply voltage variation,
input voltage variation, variation in part contents and environmental temperature,
and so on)
Otherwise the Module may be damaged.

(d) If the Module keeps displaying the same pattern for a long period of time,
the image may be "sticked" to the screen.
To avoid image sticking, it is recommended to use a screen saver.

(e) This Module has its circuitry PCB's on the rear side and should be handled
carefully in order not to be stressed.

(f) Please contact SEC in advance when you display the same pattern for a long time.

MODEL LSJ320AP04 Doc. No 07-000-G-20120127 Page 24/28