ERROR_CO

MESSAGE_NAME MESSAGE_TEXT CONTEXT

DE
The user entered
You cannot enter
absence dates that
absence dates that
ANC- ANC_TRANS_DTS_TOO_FAR_FUTU are further into
are more than
3405000 RE the future than
{NUM_DAYS}
permitted by the
days in the future.
setup.
The user is trying
to repeat absence
The duration of the
dates, but the
dates to repeat must
duration of those
be shorter than the
ANC- ANC_TRANS_DUR_CANNOT_REPE dates is too long
repeat frequency.
3405001 AT for the repeat
Change the dates or
frequency. Exam
increase the
ple would be
frequency.
selecting 8 days
to repeat weekly.
An accrual plan's
remaining
balance would
fall below the
allowed
minimum balance
limit if this
absence is
recorded. The
plan
configuration
You cannot record
might or might
this absence because
not allow
your balance will
ANC- negative balance
ANC_TRANS_BAL_TOO_LOW fall below the
3405002 and if it does,
configured
there might or
minimum for this
might not be a
type of absence.
limit on the
negative balance.
So it is
impossible to
write one
message that
provides tokens
to account for all
the configuration
variables.Note
that if there are
 multiple plans,
the absence is
deducted from
the first plan's
balance until the
balance is
exhausted. The
remaining
absence time is
then deducted
from the next
plan, etc.
Employee
scheduled by
The absence
ANC- ANC_TRANS_DAY_DUR_CANT_BE duration enters a
duration must be
3405003 _ZERO value of 0 for the
greater than zero.
duration of an
absence.
User entered a
The absence date
ANC- date that is not a
ANC_TRANS_DT_NOT_WRK_DAY must be a scheduled
3405004 scheduled work
work day.
day.
Some or all of the
absence overlaps
with another
absence. In the
basic view, this
error arises if the
start and/or end
Some dates in this date is/are
ANC- absence overlap already recorded
ANC_TRANS_ABS_DTS_OVERLAP
3405005 with another as absence dates
absence. in other
absences. In the
advanced
scheduling view,
the error arises if
any dates are
already recorded
in other absences.
The end date must
ANC- ANC_TRANS_END_DT_EQ_STRT_D
be later than the
3405006 T
start date.
You cannot record The system
ANC-
ANC_TRANS_MAX_DUR_XCEEDED this absence because calculated
3405007
the duration exceeds duration exceeds
 the maximum time the maximum
({MAX_DUR} duration allowed
{DUR_UOM}) for the absence
allowed for this type.
absence type.
You cannot record The duration
this absence because (system
ANC- the duration must be calculated) is less
ANC_TRANS_MIN_DUR_NOT_MET
3405008 at least than the
{MIN_DUR} minimum
{DUR_UOM}. duration allowed.
The expected or
You must enter actual date of
either the planned childbirth or
ANC- ANC_TRANS_PL_OR_ACT_EVT_DT
date or the actual adoption is
3405009 _RQD
date of the event required if the
{EVENT_TYPE}. user is able to
enter both.
The user entered
You cannot record an absence start
an absence that is date that is
ANC-
ANC_TRANS_STRT_DT_TOO_OLD earlier than further back in
3405010
{EARLIEST_DAT the past than
E}. permitted by the
setup.
Employee's
multiple
assignments are
scheduled
differently (by
You cannot record
ANC- ANC_TRANS_WORK_SCHED_ADMI duration and by
this absence
3405011 N time of
yourself.
day). The advan
ced scheduling
UI is not
available to the
employee.
This sequence Accrual sequence
number already must be unique as
ANC- ANC_ABS_PLAN_ACCBAND_SEQ_
exists for an accrual bands are
3405012 UNIQ
band. Enter a unique assessed in
number. sequence order.
You must enter a The user must
ANC- combination of enter either a
ANC_ABS_PLAN_DURATION_RULE
3405013 duration and pay duration and pay
rate, or provide a rate together or
 formula, to create an specify a formula
entitlement band for calculating
detail. the entitlement.
An entitlement band
The entitlement
detail with this
band detail name
ANC- ANC_ABS_PLAN_ENTDTL_NAME_ name already exists
must be unique
3405014 UNIQ in this absence plan.
within the
Enter a unique
absence plan.
name.
Entitlement band
This sequence detail sequence
number already must be unique
ANC- ANC_ABS_PLAN_ENTLDTL_SEQ_U exists for an within an
3405015 NIQ entitlement band entitlement
detail. Enter a band. Sequence
unique number. controls the
processing order.
Within a plan,
This sequence
entitlement bands
number already
must have unique
ANC- ANC_ABS_PLAN_ENT_BAND_SEQ_ exists for an
sequences. This
3405016 UNIQ entitlement band.
controls the order
Enter a unique
that bands are
number.
assessed.
An eligibility profile
with this name Eligibility profile
ANC- ANC_ABS_PLAN_PROFILE_NAME_ already exists in this name must be
3405017 UNIQ absence plan. Select unique within an
a unique eligibility absence plan.
profile.
Profile sequence
This sequence number must be
number already unique within an
exists for an absence plan
ANC- ANC_ABS_PLAN_PROFILE_SEQ_UN
eligibility profile in because the
3405018 IQ
this absence plan. sequence number
Enter a unique controls the order
number. that eligibility is
assessed.
Priority values Priority for a
among plans that are non-statutory
ANC- ANC_ABS_TYPE_PLAN_NON_STAT not set to concurrent absence plan
3405019 RY must be unique must be unique
within an absence over a period of
type. time.
 Setup issue.
Each absence plan
When associating
that you associate
absence plans to
ANC- ANC_ABS_TYPE_PLAN_STATRY_R with the absence
an absence type,
3405020 ULE type must have a
each associated
unique priority
plan must have a
value.
unique priority.
An absence plan
Users may not
with this name
use the same
ANC- already exists in the
ANC_ABS_PLAN_NAME_UNIQUE name for multiple
3405021 selected legislation.
plans within a
Enter a unique
legislation.
name.
The minimum
A minimum can
duration value must
ANC- never exceed a
ANC_ABS_TYPE_MIN_MAX_RULE be less than or equal
3405022 maximum for the
to the maximum
same item.
duration value.
An absence type
Absence type
with this name
name must be
ANC- ANC_ABS_TYPE_NAME_LDG_UNIQ already exists in the
unique within a
3405023 UE legislative data
legislative data
group. Enter a
group.
unique name.
Absence type
name must be
An absence type
unique within a
with this name
ANC- ANC_ABS_TYPE_NAME_LEG_UNIQ legislation. This
already exists in the
3405024 UE generally applies
legislation. Enter a
to internal
unique name.
localization
development.
An absence plan
An absence plan
with this name
can only be
ANC- ANC_ABS_TYPE_PLAN_UNIQUE_R already exists for
associated once
3405025 ULE the absence type.
to an absence
Select a unique
type.
absence plan.
An absence reason
An absence
with this name
reason can only
ANC- ANC_ABS_TYPE_REASON_UNIQ_R already exists for
be associated
3405026 ULE the absence type.
once with an
Select a unique
absence type.
reason.
ANC- Absence record does An absence
ANC_ABS_ENT_DEL
3405027 not exist. record is being
 altered in the
time card, but it
has been deleted.
The user is
An absence reason attempting to
with this name specify an
ANC- ANC_ABS_REASON_NAME_LEG_U
already exists in the absence reason
3405028 NIQUE
legislation. Enter a name that already
unique name. exists within
legislation.
Accrual period
When accrual
could not be
process runs, it
determined for plan
ANC- throws this error
ANC_ACC_INVALID_PERIOD {PLAN_NAME}.
3405029 if it could not
Review and correct
figure out the
the plan's
accrual period.
configuration.
This should be a
very odd
situation. Rejecte
You cannot update
d absences should
ANC- this absence record
ANC_ABS_ENT_REJECT not appear in the
3405030 because it was
time card and
rejected.
should be
retracted from the
time card.
If the absence
A work schedule for process cannot
{PERSONNAME} find a work
between schedule for
{STARTDT} and absences
ANC- ANC_WORK_SCHEDULE_NOT_FOU
{ENDDT} was not evaluated as work
3405031 ND
found. Review and time missed, it
correct the work cannot calculate
schedule hierarchy the units or
for the employee. duration of the
absence.
A report or
analytic that
The end date must
ANC- references a time
ANC_END_DT_EQ_STRT_DT be later than the
3405032 period must
start date.
reference a valid
range of time.
You cannot record User is trying to
ANC-
ANC_ABS_NO_PLN_ENRL this absence because enter an absence,
3405033
the employee is not but they are not
 enrolled in orentitled to any
eligible for any
absence
absence plan. plan. They
should not be
using the product
to report this
person's absence
or correct
eligibility
problems.
The user cannot
configure the
The maximum maximum
absence duration for allowed duration
ANC- the absence type of the absence to
ANC_TYPE_MAX_GREATER_MIN
3405034 must be greater than be less than the
the minimum minimum
duration. duration. Both
values must be
specified.
Absence type
An absence type
cannot be
with this name
duplicated within
ANC- already exists for
ANC_ABS_CAT_RULE_UNIQ_RULE an absence
3405035 the absence
category unless
category. Select a
the legislation is
unique type.
unique.
A certification with
Certifications
this name already
within absence
ANC- ANC_ABS_TYPE_CERT_NAME_UNI exists for this
types can only be
3405036 Q absence type. Select
entered once for
a unique
real.
certification.
Absence types
can only have
You can associate
one absence
ANC- ANC_ABS_TYPE_REASON_UNIQ_D only one absence
reason value
3405037 FLT reason as a default
designated as the
for an absence type.
default during
any time period.
This message
You cannot delete
appears when the
ANC- this plan because it
ANC_STOP_PLAN_DELETE user tries to
3405038 has enrollment data
delete a plan that
associated with it.
employees have
 already enrolled
in.
You cannot delete
ANC- this plan because it
ANC_STOP_PLAN_DELETE_TYPE
3405039 is used in an
absence type.
This message
appears when the
You cannot delete
user attempts to
ANC- this certification
ANC_STOP_CERT_DELETE_TYPE delete a
3405040 because it is used in
certification used
an absence type.
in an absence
type.
This message
You cannot delete appears when the
ANC- ANC_STOP_REASON_DELETE_TYP this absence reason user tries to
3405041 E because it is used in delete a reason
an absence type. associated to a
type.
This message
You cannot delete
appears when the
ANC- this absence type
ANC_STOP_TYPE_DELETE_CAT user attempts to
3405042 because it is used in
delete a type used
an absence category.
in a category.
This message
You cannot delete appears when the
this absence type user attempts to
ANC-
ANC_STOP_TYPE_DELETE because absences delete a type that
3405043
have been recorded has absences
using this type. recorded against
it.
User is recording
an absence.
You cannot record
ANC- Absence start
ANC_ABS_ST_DT_BFOR_HR_DT an absence before
3405044 date must be after
the hire date.
the employee hire
date.
User entered
You cannot record absence start date
this absence because or end date is not
ANC- ANC_ABS_DT_NOT_IN_ABSTYP_R
the absence type is within the range
3405045 ANGE
not valid during the of absence type
absence period. effective start
date and end date.
 The
administrative
You cannot enroll
user is attempting
an employee into an
to enroll an
ANC- absence plan before
ANC_ENRL_DT_PRIOR_HIRE_DT employee into an
3405046 hire date or later
accrual plan
than or equal to
before hire or on
termination date.
or after
termination.
User is entering
an absence in a
flow managed by
the "Childbirth or
placement"
pattern. When
You must enter an
actual start date is
actual end date or
ANC- entered, actual
ANC_MAT_OPEN_END_RTN_DT indicate that the
3405047 end date must be
absence is open
recorded or open
ended.
ended must be
checked. This
message applies
only if the check
box is available
for edit.
User is entering
an absence in a
flow managed by
the "Childbirth or
placement"
pattern. When
planned start date
You must enter a is entered,
ANC-
ANC_MAT_RTN_PLN_END_DT planned end date or planned end date
3405048
actual end date. must be recorded
or will not return
to work must be
checked. This
message applies
only if the check
box is available
for edit.
You must enter Maternity
ANC- either a planned absences entry by
ANC_MAT_PLN_ACT_REQ
3405049 start date or actual the user. Either
start date. planned start date
 or actual start
date is required to
enter.
User is running
accruals from
Enterprise
Accruals were Scheduler
ANC-
ANC_ACRPRC_PRD_RUN_PAST already run for this Service. User is
3405050
period. trying to run for a
period that is
already been run
in the past.
While manually
enrolling or
manually
terminating
The enrollment
enrollment in an
termination date
ANC- ANC_ENRL_END_DT_PRIOR_ENRL accrual plan, the
must be later than
3405051 _DT administrator has
the enrollment start
entered dates
date.
where the
termination date
precedes
enrollment start.
Absence types
and absence plans
The absence plan cannot have
and absence type different units of
ANC-
ANC_INCOMPATIBLE_UOM must have measure unless
3405052
compatible units of there is a
measure. conversion
formula on the
plan.
Absence
recording time
entered through
The absence start
time card. Either
time and end time
ANC- start time or stop
ANC_ABS_TM_NOT_IN_SCH must be within the
3405053 time are not
start and end times
within the time
of the work day.
range of person
work schedule for
the day.
You must select a The user has
ANC- ANC_ABS_PLAN_RATE_RULE_LIA
booked liability rate specified that
3405054 B
rule to transfer leave information
 liability rates for should be sent to
payroll processing. payroll but has
not specified if
the interface
should send a rate
for leave liability
booking.
The user has
enabled
You must select a
discretionary
discretionary
disbursements of
payment rate rule to
ANC- ANC_ABS_PLAN_RATE_RULE_DIS accrual balances
transfer accrual
3405055 BURS without
balance
specifying how
disbursements for
payroll should
payroll processing.
pay those
balances.
The user has
configured final
accrual balance
You must select a payments and
final balance indicated that
ANC- ANC_ABS_PLAN_RATE_RULE_FINP payment rate rule to they system will
3405056 AY transfer payment transfer data to
information for payroll, but has
payroll processing. not configured
how payroll will
calculate the
payment rate.
The user has
enabled
transferring
You must select an
absence data to
absence payment
payroll but has
ANC- rate rule to transfer
ANC_ABS_PLAN_RATE_RULE_USE not specified the
3405057 payment
rule specifying
information for
how payroll
payroll processing.
should treat time
used under the
plan.
An inactive plan
You cannot create
has been passed
ANC- ANC_CANNOT_ENROLL_INACTIVE an enrollment for an
to plan
3405058 _PL inactive absence
enrollment
plan.
process.
 User has selected
The absence start
a start or end date
date and end date
for the absence
ANC- ANC_ABS_NOT_BETWN_TYP_EFF_ must be within the
that is out side
3405059 DT allowed range of
the effective
dates for the
dates of the
absence type.
Absence Type.
Absence is
entered through
The daily duration
time card. The
of the absence must
ANC- absence entry
ANC_ABS_DUR_NOT_IN_SCH not exceed the
3405060 duration is more
duration of the work
than work
day.
schedule duration
for that day.
Time card must
You must enter a pass start and end
ANC- start time and an end date times to the
ANC_INV_LAYOUT_TM_BASE_SCH
3405061 time to record an record absences
absence. for time based
schedule.
The user is trying
to do a
The effective date of transaction (such
ANC- the transaction must as a balance
ANC_TRANS_DT_PRIOR_ENRL_DT
3405062 be later than the date adjustment) with
of enrollment. a date that is prior
to plan
enrollment date.
This is when the
user invokes a
transaction (such
The effective date of as cash-out) from
the transaction must Administrator UI
ANC-
ANC_TRANS_DT_PRIOR_HIRE_DT be later than the hire and the date
3405063
date of the selected for the
employee. transaction is
prior to
employee's hire
date.
This error
The Evaluate
message is
Absences process
ANC- thrown when
ANC_INVALID_END_TIME_ARG could not complete.
3405064 invalid
Contact your
parameters are
administrator.
passed to absence
 evaluation. This
is usually a
developer error.
This error
message is
The Evaluate thrown when
Absences process invalid
ANC-
ANC_INVALID_START_TIME_ARG could not complete. parameters are
3405065
Contact your passed to absence
administrator. evaluation. This
is usually a
developer error.
Payment
Error condition
information could
from Payroll
ANC- not be transferred
ANC_PAY_INTERFACE_ERROR Interface which is
3405066 for payroll
thrown using this
processing. Contact
message.
your administrator.
When
configuration
matrix is
evaluated for
A configuration
accrual or
ANC- matrix error
ANC_MATRX_EVAL_ERROR qualification
3405067 occurred. Contact
plans, if any
your administrator.
errors occur, they
are displayed
using the error
message.
This error
message is
The Evaluate thrown when
Absence process invalid
ANC-
ANC_INVALID_ABS_ENTRY_ARG could not complete. parameters are
3405068
Contact your passed to absence
administrator. evaluation. This
is usually a
developer error.
This message
appears when a
You must provide user tries to
ANC- an absence reason schedule an
ANC_REASON_REQUIRED
3405069 for this absence absence (for an
type. absence type that
requires absence
reasons) without
 providing an
absence reason.
This is a warning
and will be
Accruals for
shown when
absence plan
ANC- ANC_ACRL_MULTIPLE_PERIOD_R accrual is run
{PLAN} were
3405070 UN from admin UI if
calculated only for
the date selected
the next period.
for accrual run is
way into future.
Employee's
multiple
Your schedule of
assignments are
work during the
scheduled
absence period
ANC- ANC_TRANS_WORK_SCHED_USE_ differently (by
requires you to use
3405072 ADV duration and by
the advanced mode
time of day). The
to record this
absence must be
absence.
entered using the
advanced mode.
The user could
either be
recording an
absence or
editing an
absence.
Advanced mode
If you switch to
is used to
basic mode, all dates
ANC- ANC_TRANS_NNCONT_TO_BASIC_ schedule non-
in this absence will
3405073 WARN continuous
be cleared. Do you
absences. Making
want to continue?
entries in
advanced mode
and returning to
basic mode will
delete those
individual date
entries.
This message is
If you change the
for the situation
absence type,
when the user, in
information specific
ANC- ANC_TRANS_CHG_TYPE_CLEAR_ the process of
to this absence type
3405074 WARN recording an
will be deleted in
absence, has
this absence. Do you
provided details
want to continue?
specific to that
 absence type, and
then decided to
change the
absence type.
Different absence
types have
different details
(for example,
expected date of
childbirth may
only apply to a
maternity leave).
Changing the
absence type will
remove any
information that
does not apply to
the newly
selected absence
type.
The absence
duration is less than
The duration
the minimum
(system
duration
calculated) is less
ANC- ANC_TRANS_MIN_DUR_NOT_MET ({MIN_DUR}
than the
3405075 _WARN {DUR_UOM})
minimum
defined for this
duration
absence type. Do
guideline.
you want to
continue?
The duration
The absence (system
duration exceeds the calculated)
maximum time exceeds the
({MAX_DUR} maximum
ANC- ANC_TRANS_MAX_DUR_XCEEDED
{DUR_UOM}) duration
3405076 _WARN
defined for this guideline. The
absence type. Do maximum
you want to duration can be
continue? exceeded; this is
a warning.
If you record this An accrual plan's
absence, your remaining
ANC- ANC_TRANS_BAL_TOO_LOW_WAR
balance will fall balance would
3405077 N
below the fall below the
configured allowed
 minimum for this minimum balance
type of absence. limit if this
absence is
recorded. The
plan
configuration
might or might
not allow
negative balance
and if it does,
there might or
might not be a
limit on the
negative balance.
So it is
impossible to
write one
message that
provides tokens
to account for all
the configuration
variables.Note
that if there are
multiple plans,
the absence is
deducted from
the first plan's
balance until the
balance is
exhausted. The
remaining
absence time is
then deducted
from the next
plan, etc.
The user has
entered a planned
Planned start date end date but
ANC- ANC_TRANS_MAT_PLN_START_V_
must be before the planned start date
3405082 END
planned end date. is blank or on or
before the
planned end date.
The user has
Actual start date
ANC- ANC_TRANS_MAT_ACT_START_V_ entered an actual
must be before the
3405083 END end date but the
actual end date.
actual start date is
 either blank or
after the end date.
The absence type
You must provide is configured to
ANC-
ANC_COMMENTS_REQD comments for this require comments
3405084
absence type. and no comments
have been added.
User is
attempting to
record an absence
through an
This worker is not
external source
eligible to add
ANC- (such as a time
ANC_ABS_ENTRY_NOT_ELIG absences of the
3405085 card or loader)
selected absence
for an absence
type.
type that the
person is
restricted for
entering.
The user has
attempted to
ANC- You must enter an submit a
ANC_END_DATE_REQD
3405086 end date. transaction that
does not have the
required end date.
The user has
attempted to
submit an
ANC- You must enter a
ANC_START_DATE_REQD absence record
3405087 start date.
without a
required start
date.
Self-service user
is attempting to
record or update
an absence
record. That
update is failing
ANC- Absence record because of set up
ANC_SELF_SERVE_GENL_ERROR
3405088 update failed. or conversion
issues. The self-
service user will
neither
understand or be
able to rectify the
problem.
 This error occurs
The formula when an absence
{FORMULA_NAM set up object has
ANC-
ANC_FMLA_RTN_INV_VAL E} did not return the an associated
3405089
expected value formula that
{RET_PARAM}. returns an invalid
result.
The type has an
associated
validation
formula and the
The absence does conditions
not satisfy the outlined in that
ANC- validation formula formula have not
ANC_ABS_ENTRY_FAIL_VALDN
3405090 criteria associated been met. These
with this absence formulas are
type. usually user
defined and we
cannot provide
more specific
assistance.
The
You have chosen to administrative
run the accrual user has selected
ANC- process for all of the the option to run
ANC_RUN_ALL_ACCRUAL_PLANS
3405091 employee's plan accruals for all
enrollments. Do you the accrual plans
want to continue? the employee is
enrolled in.
The
administrative
user is trying to
This worker has
transfer balances
ANC- unprocessed
ANC_UNPROCESSED_ABSENCES from one plan to
3405092 absences. Do you
another and there
want to continue?
are unprocessed
absences for that
employee.
The
administrative
You can complete
user is trying to
ANC- this action on or
ANC_BEFORE_ENROLLMENT take an action
3405093 after enrollment in
against an
the plan.
enrollment with a
date prior to the
 effective date of
the enrollment.
The administrator
is attempting to
You cannot transfer
transfer accrual
accrued entitlements
ANC- ANC_ACCRUAL_TRNSFR_DIF_UO entitlements
between plans of
3405094 M between two
different units of
plans with
measure.
different units of
measure.
The
You cannot administrative
ANC- complete this action user is attempting
ANC_INACTIVE_PLAN
3405095 because the plan is to take an action
inactive. against an
inactive plan.
The administrator
is attempt to
The selected plan
disburse or
does not have
ANC- transfer accrued
ANC_INSUFFICIENT_BALANCE sufficient balance to
3405096 entitlements in
complete the
excess of the
transaction.
amount of the
balance.
The self-service
user has tried to
enter an absence
Your scheduled time transaction
for this period against time
ANC-
ANC_INVALID_SCHED_DATA prevents you from where a schedule
3405097
entering this is not in effect or
absence. where there are
incompatible
shifts on a single
day.
The self service
user has been
allowed to select
an absence type
The selected
ANC- that they are
ANC_INVALID_TYPE absence type is not
3405098 restricted from
valid.
entering. In
general, it should
not be
encountered.
 This occurs in
You must use either
Fuse when a
single day or
ANC- frequency is
ANC_FREQUENCY_CHANGE continuous days
3405099 chosen that is not
frequency for this
enabled for the
absence type.
type.
This message is
used when there
ANC- The absence could
ANC_DATE_MISMATCH is an effective
3405100 not be submitted.
date problem in
the set up.
This message is
issued to the
administrative
user when they
You cannot try to do a
complete this action balance
ANC- as it will result in transaction that
ANC_ADJ_BAL_TOO_LOW
3405101 decreasing the plan will take the
balance below the balance of an
minimum value. accrual plan
below the
minimum value
(zero - negative
tolerance).
User is
attempting to
You cannot submit enter an absence
ANC- an absence in effect that either starts
ANC_ABS_DT_AFTR_TRMN_DT
3405102 after the worker's or continues
termination date. beyond the
worker's
termination date.
The user is
You cannot record attempting to
this absence because enter an absence
ANC-
ANC_MAX_OCCURRENCES it exceeds the but the limit on
3405103
maximum number the number of
of occurrences. occurrences has
already been met.
The user is trying
This absence is
ANC- to link an absence
ANC_DUPLICATE_LINKED_ABS already linked to the
3405104 record that is
current absence.
already linked.
ANC- Status changes of a The user is
ANC_CERT_STATUS_WARNING
3405105 certification cannot changing the
 be undone. Do you status of a
want to continue? certification and
this cannot be
undone.
The user is
attempting to
The certification due
process a
ANC- date must be on or
ANC_CERT_DUE_DATE certification with
3405106 later than the
a due date prior
effective date.
to the initiation of
the certification.
The user has
entered a
Certifications must
certification
ANC- be unique. They
ANC_DUPLICATE_CERT_PER_ABS against an
3405107 cannot be of the
absence that is
same type and date.
the same type and
date.
For a single day's
entry, the user is
ANC- Start time must be attempting to add
ANC_TIME_VALIDATION
3405108 before end time. time entries that
conflict with each
other.
This message
appears when you
are trying to load
an absence record
The worker's using data loader
legislation and the for a UK based
ANC-
ANC_ABS_PER_INV_LEG_TYPE absence type's employee with a
3405109
legislation must be US based absence
the same. type. The
Absence type and
person should
belong to the
same legislation.
Error applicable
Valid values for usually from
ANC- ANC_INVALID_ACRL_ENTRY_TYP
accrual entry type HDL. See
3405110 E
are: {VALUES}. product use case
scenario.
Actual start date The user has tried
ANC- ANC_ACT_START_DATE_RULE_VA must be to enter an actual
3405111 LID {OPERATOR} start date that
{RESOLVED_DAT does not meet a
 E} for this absence configured rule
type. for the absence
type.
The user has tried
Planned start date
to enter a planned
must be
start date that
ANC- ANC_PLN_START_DATE_RULE_VA {OPERATOR}
does not meet a
3405112 LID {RESOLVED_DAT
configured rule
E} for this absence
for the absence
type.
type.
The user has tried
Absence start date
to enter an
must be
absence start date
ANC- {OPERATOR}
ANC_START_DATE_RULE_VALID that does not
3405113 {RESOLVED_DAT
meet a configured
E} for this absence
rule for the
type.
absence type.
The user is
attempting to
enter planned
dates but has not
entered a planned
ANC- You must enter a end date. This
ANC_PLN_END_DT_REQD
3405114 planned return date. message is used
when the option
of designating
that employee is
not returning to
work is available.
This is the
transactional side
of the absence
start date
Actual start date for
validation rule
this absence type
that the user built
must satisfy the
in the Display
condition:
Features tab
ANC- ANC_ACT_START_DATE_RULE_VA {OPERATOR}
when creating an
3405115 LID2 {RESOLVED_DAT
absence type.
E} and
Depending on
{OPERATOR2}
how the user
{RESOLVED_DAT
decides to
E2}.
configure the
rule, the user
wants to display
an appropriate
 error message to
the user about
why they are not
able to enter an
absence on that
date.
There is a
mismatch
between detail
records and the
The row you are
absence header
trying to modify
(the detail records
does not exist.
ANC- exist, but the
ANC_HDL_ROW_DOES_NOT_EXIST Check the data in
3405116 header does not).
your file, make
This message
corrections, and
appears when a
upload again.
user attempts to
delete a row
using HCM Data
Loader.
The user has
The plan use for this selected the
absence will be action of
recalculated. All recalculating plan
ANC-
ANC_PLN_USE_RECALC previous overrides use for a
3405118
will be ignored. Do particular
you want to absence. Any
continue? overrides will be
ignored.
If you override the The user is about
payment percentage, to override the
then the existing Payment
ANC-
ANC_CONF_PCT_OVERRIDE calculated values for Percentage field
3405119
this plan will be and the user's
deleted. Do you intent is being
want to continue? confirmed.
The user has
initiated an
The override dates
override action
ANC- ANC_OVERRIDE_OUTSIDE_ABS_D must be within the
for dates that fall
3405120 ATES absence start and
outside the range
end dates.
of the absence
record.
The user has
ANC- The value
ANC_VALUE_VALID_BETWEEN attempted to enter
3405121 {VALUE} must be
a numeric value
 between {MIN} and outside a range.
{MAX}. This error is used
when it's not an
issue of
configuration,
just to prevent
crazy entries like
999999999.9999
9999 percent.
Attribute {ATTR} User is trying to
cannot be updated. update an
ANC- ANC_DL_ATTR_NON_UPDATEABL Remove this attribute using
3405122 E attribute from the file based loader
data file and upload that does not
again. support updating.
User is running
accruals from
Enterprise
The accrual period Scheduler
specified is greater Service. User is
ANC- than three months in trying to run for a
ANC_ACRPRC_PRD_IN_PAST
3405123 the past or future. period that is
Do you want to either more than
continue? three months in
the past or greater
than three months
in future.
User is running
accruals from
Enterprise
Scheduler
Service. When
You must either
repeating period
ANC- select a repeating
ANC_ACRPRC_NULL_RPT_PRD is null, effective
3405124 period or enter an
date must not be
effective date.
null. Otherwise
accrual period to
run cannot be
determined by the
system.
User is running
You must either
accruals from
select an absence
ANC- Enterprise
ANC_ACRPRC_NULL_PARAMS plan or enter at least
3405125 Scheduler
one population
Service. When
parameter.
Absence plan
 value is null, at
least one of the
other population
parameter must
not be null.
This message
appears when the
The load process
user is attempting
failed because the
to load an
absence reason
ANC- absence type
ANC_LDR_LEG_REASON associated with the
3405126 definition that
absence type
includes a reason
belongs to another
defined within
legislation.
another
legislation.
This message
appears when the
The load process user is attempting
failed because the to load an
absence certification absence type
ANC-
ANC_LDR_LEG_CERT associated with the definition that
3405127
absence type includes a
belongs to another certification
legislation. defined within
another
legislation.
This message
appears when the
The load process
user is attempting
failed because the
to load an
absence type
ANC- absence category
ANC_LDR_LEG_TYPE associated with the
3405128 definition that
absence category
includes a type
belongs to another
defined within
legislation.
another
legislation.
This message
The load process
appears when the
failed because the
user is attempting
absence plan
to load an
associated with the
ANC- absence type
ANC_LDR_LEG_PLAN absence type
3405129 definition that
belongs to another
includes a plan
legislation or
defined within
legislative data
another
group.
legislation or
 legislated data
group.
The accrual process Error during
failed because the accrual
ANC- ANC_ACRL_ON_END_DATED_PLA person is not processing. Plan
3405130 N enrolled in the enrollment for the
absence plan that person is not
you specified. found.
This error
message occurs
when either the
user has not
The accrual process
specified the
failed because the
accrual period or
ANC- accrual period that
ANC_INV_ACRL_PRD_TO_PROC the accrual period
3405131 you specified is not
specified by the
valid for the absence
user is not valid
plan {PLAN}.
for the absence
plan for which
accruals are being
calculated.
Error from
The accrual process accrual process.
failed because the Accrual process
repeating periods is not run for
ANC-
ANC_ACRL_PRD_NOT_CONTNS setup for the continuous
3405132
absence plan periods. Plan
{PLAN} has repeating period
changed. change can cause
this issue.
Error during
The accrual process
accrual
failed because the
processing.
ANC- person does not
ANC_PER_PAYROLL_NOT_DEF Payroll Id is not
3405133 have an active
defined for the
payroll on the
person being
processing date.
processed.
The
Upload of the file administrative
failed because the user is trying to
carry over record for load carryover
ANC-
ANC_DUP_COVR_LOAD plan {PLAN}, record that is
3405134
person {PERSON}, already existing
date {DATE} in the system.
already exists. User : Admin
user
 This is being
loaded through
FBL.
User tried to load
duplicate carry
over record that
triggered the
message.
User should
contact the
system
administrator and
remove the
duplicate row and
reload the data.
Adjustment value
that is either
entered, updated
or loaded is
The adjustment causing the
cannot be processed accrual balance
because the balance cross the ceiling
ANC- will exceed the limit.
ANC_ADJ_BAL_OVER_CEILING
3405135 ceiling limit for the User: Admin user
maximum leave This adjust is
time that can be created by admin.
accrued. User is trying to
enter adjustment
value that
triggered the
message.
The user is trying
to change the
balance
Changed balance calculation date
details will be lost if after making
you change the changes to the
balance calculation balance details.
ANC-
ANC_UNSAVED_BAL_DTLS date. Balance This action will
3405136
calculation date cause the pop-up
determines balance to refresh and if
details. Do you want the changes have
to continue? not been saved,
then the changes
will be lost
because balance
details are
dependent on the
balance
calculation date.