Scribd Logo
Upload

Welcome to Scribd!

  • 725 views

    KWP2000 Installation

    Uploaded by

    Keduar Nosferatus
    The document provides instructions for installing KWP2000 Plus software and using the KWP2000 ECU flasher device to read from and write to vehicle ECUs. To read data from an ECU, the device must be connected to the vehicle's diagnostics port and USB port while the ignition is on. Selections are made to choose the ECU and read its original data. To write data, a file is selected and written to the selected ECU after connecting the device while the ignition is on. Additional steps are required for some Volkswagen vehicles to deactivate instruments before communicating.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    KWP2000 Installation

    Uploaded by

    Keduar Nosferatus
    725 views6 pages
    The document provides instructions for installing KWP2000 Plus software and using the KWP2000 ECU flasher device to read from and write to vehicle ECUs. To read data from an ECU, the device must be connected to the vehicle's diagnostics port and USB port while the ignition is on. Selections are made to choose the ECU and read its original data. To write data, a file is selected and written to the selected ECU after connecting the device while the ignition is on. Additional steps are required for some Volkswagen vehicles to deactivate instruments before communicating.

    Original Description:

    Manual Banco de Prueba de Inyectores

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides instructions for installing KWP2000 Plus software and using the KWP2000 ECU flasher device to read from and write to vehicle ECUs. To read data from an ECU, the device must be connected to the vehicle's diagnostics port and USB port while the ignition is on. Selections are made to choose the ECU and read its original data. To write data, a file is selected and written to the selected ECU after connecting the device while the ignition is on. Additional steps are required for some Volkswagen vehicles to deactivate instruments before communicating.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    725 views6 pages

    KWP2000 Installation

    Uploaded by

    Keduar Nosferatus
    The document provides instructions for installing KWP2000 Plus software and using the KWP2000 ECU flasher device to read from and write to vehicle ECUs. To read data from an ECU, the device must be connected to the vehicle's diagnostics port and USB port while the ignition is on. Selections are made to choose the ECU and read its original data. To write data, a file is selected and written to the selected ECU after connecting the device while the ignition is on. Additional steps are required for some Volkswagen vehicles to deactivate instruments before communicating.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 6

    KWP2000 Plus Software Installation and Operating Instructions

    Installation:

     Install the driver package to your Notebook/PC


     Connect the KWP2000 ECU Flasher to your USB port
     Direct windows to the folder where you installed the driver package
     Restart your computer

    Reading Data from a Supported ECU:

     Connect the KWP2000 to your USB port and to the diagnostics port on the vehicle
     Start the communication software
     Turn the ignition on (Do not start the engine, only the 2nd key turn)
     Select the ECU that you want to read/write from the list
     Select additional options (if needed)
     Click the read button to read out the original data (where supported)
     Save the file to your hard drive , edit or forward it

    How to write data to a supported ECU:

     Connect the KWP2000 to your USB port and to the diagnostic port on the vehicle
     Start the communication software
     Turn the ignition on (Do not start the engine, only the 2nd key turn)
     Select the ECU that you want to read/write from the list
     Select additional options (if needed)
     Click the write button and select the file you want to write
     Follow the instructions on screen
     Switch off the ignition and wait 10 seconds to complete

    Visit OBDInnovations.com to see our wide range of diagnostic tools + more


    Reading the ECU:

    Choose the make and type of the engine's ECU you want to read/write from a list. If you have
    any doubt about your ECU type you can verify it.

    When the dialogue window appears, click on INFO and wait for the program to communicate
    with the ECU.

    You will see the information about your ECU type. Just click on READ to assure that we have a
    copy of the original file (It’s highly recommended to save a backup case there’s a problem).
    Visit OBDInnovations.com to see our wide range of diagnostic tools + more
    The program starts reading the ECU. Please do not interrupt this process.

    Choose where you want to save the original file and name it. To simplify it, name it with the
    numbers that appear in the window information of the ECU.

    It will ask you to turn the key of the ignition off. After turning off the ignition, press OK.

    Visit OBDInnovations.com to see our wide range of diagnostic tools + more


    Writing the ECU:

    Choose the make and type of the ECU and click on INFO. Open the file for your vehicle or ECU
    type.

    In the right of the window you will see the reference of the ECU that corresponds to the open
    file. To confirm that this information matches with your ECU type, verify the numbers in both
    windows.

    If you are absolutely sure that everything you did is correct, click on PROG. The system will
    now erase the memory on the ECU and flash program it with the new file. Do not interrupt this
    process.

    Visit OBDInnovations.com to see our wide range of diagnostic tools + more


    When it’s finished, turn the ignition off, confirm by pressing OK and you’re done!

    Visit OBDInnovations.com to see our wide range of diagnostic tools + more


    VAG (Volkswagen Automotive Group) Instruments Deactivation

    For Volkswagen/Audi/Seat/Skoda vehicles, before communicating with the ECU, the


    instruments panel must be deactivated. Open the fuse box and remove the 5A fuse shown in red
    on the diagram above. With the instruments panel off you can try communicating with the ECU

    Visit OBDInnovations.com to see our wide range of diagnostic tools + more

    You might also like