Fimet F1 Technical Manual PDF

X
1 2 3 4 5 6 7 8 9 10 11 12 2009/2
FIMET NEWS FIMET NEWS FIMET NEWS FIMET NEWS
LET’S CONTINUE I would also like to use this opportunity
and thank you for the positive feedback
We have certainly all hoped for better you have sent about this newsletter
economic times to come and lately we and the refreshed company image. I
at Fimet have experienced significant will be leaving for maternity leave in
improvement in the form of increased the end of September and Mr Abdellatif
number of orders and a record-long Krimou will take care of my tasks as a
production list. Typically for our company newly nominated Fimet’s Sales Director.
we have used the short break for (Introduction of him can be read on page
continuous development new solutions 8.) Similarly, Alexey Samsonov, Export
both in products and company operations. Manager for Russia and CIS countries, is
One example of the latter is the new ERP now responsible also for coordinating iOX
(Enterprise Resource Planning) system, sales in all markets.
which we started to use in the beginning
of June. Although the initial weeks with I thank you for the pleasant cooperation
the new software have required a lot of and wish you all a nice summer.
extra work from Fimet employees and
some patience from our customers, the Satu
results of increased effectiveness and
efficiency can already be seen.
The product improvements may seem

to be only slight changes but in the
right place their importance to the user-
friendliness is significant. You can read
about some latest improvements in the
following page.
We have met with you at several

exhibitions like the IDS in Cologne and
a busy autumn of many events starts in
Photos taken by Aki Salento during Fimet’s September. More information about the
recreation day. exhibitions can be found on page 7.
FIMET OY, Teollisuustie 6, 07230 Monninkylä, Finland, Tel: +358 19 521 66 00, Fax: +358 19 521 66 66, [email protected]
X
1 2 3 4 5 6 7 8 9 10 11 12 2009/2
PRODUCT NEWS of 30 seconds after each procedure. F1 to meet the demands for all surgical
Autoflush ensures hygiene and infection procedures.
SUCCESSFULL INFECTION CONTROL FOR control standards and can be performed
ALL F1 UNITS quickly and efficiently to increase the SPAREPART ARMRESTS ARE NOW
productivity of any dental clinic. UPHOLSTERY–COVERED
F1 Autoflush – an automatic flush for unit
and instrument lines is now available also SPEED LIMITATION FOR F1 MONDO Upholstery-covered armrests give a
for hanging hose F1 models. The F1 MICROMOTORS finished look to our chairs. As all our dental
Autoflush rinses the unit and instrument chairs are already sold with matching-
water lines for 3 minutes. The product Some operations like surgical procedures colour armrests, we have decided to
comes with an autoclavable instrument need a specific speed of rotation for exclude plain composite armrests also
holder fitting onto the cuspidor bowl. It micromotors, which can be hard to from the spare part options. To make the
is strongly recommended to clean dental maintain with pneumatic disc foot transfer easier we have lowered the price
unit lines at the beginning of every day control. All F1 MONDO dental units are of upholstery-covered armrests, basically
from any biofilm that may have formed. now equipped with a controller limiting you will get two armrests in the price of
The official recommendation in many the speed to a desired range. The system one. Please note this and indicate the
countries is to operate the handpieces or allows to adjust the speed range and upholstery colour code when placing your
discharge water and air for a minimum offers the flexibility and security required orders.
#USBCAB USB�cable (5m)�from�cuspidor�to�floorbox
X
2009/2
#CABPAC1 Cable�package�1 RCA audio�and�video�cables, TV-antenna�cables�(10m)
1 2 3 4 5 6 7 8 9 10 11 12 # from�display�to�floorbox

MULTIMEDIA OPTIONS
Our customers have different preferences

for multimedia cables. As there are six Display Cuspidor Floor�box
different multimedia options available, we RCA video�cable
have made the following chart to assist VGA cable�(4,5m)
you with the orders. The picture on the F1�Multimedia-arm
Power�cables
right shows what elements each cable
25-30VDC�->�12VDC
OUTPUT
12VDC
max.�3A
connects and the contents of multimedia RCA video�cable

arm packages and cable packages. VGA cable�(10m)
F1�Lifted�multimedia-arm
F1 LIFTED MULTIMEDIA ARM Power�cables
OUTPUT 25-30VDC�->�12VDC
12VDC
max.�3A
Some customers have wished for higher

S-video�cable (5m)
than standard multimedia arm. Placing S-video�cable�1
the monitor higher (300 mm than normal)
helps the patient to see the screen better
also in the lowest horizontal position.
During long sessions like teeth whitening S-video�cable�2
S-video�cable
the patient can easier watch e.g. DVD

films.
• F1 Multimedia-arm, VGA and power cables, USB�cable�(5m)
VESA75/100 display holder USB�cable
• F1 Lifted multimedia-arm, VGA (10m) and power
cables, VESA75/100 display holder 300 mm upper
RCA audio�cables (10m)
than normal (needs extra short pole, 350 mm)
RCA video�cable (10m)
• S-video cable 1 (5m) between cuspidor and floorbox Cable�package�1
TV�antenna�cable (10m)
• S-video cable 2 between monitor and cuspidor
• USB cable (5m) from cuspidor to floorbox
• Cable package 1 RCA audio and video cables, TV-
antenna cables (10m) from display to floorbox
X
1 2 3 4 5 6 7 8 9 10 11 12 2009/2
NEW BROCHURES
Fimet has released a completely updated

and redesigned company brochure. The
aim of the 16–page–leaflet has been to
give a joint short introduction of us as
a chair and dental unit manufacturer,
as well as to offer a tool for our sales
representatives to easier demonstrate
the innovative features of our products.
There is a folded pocket in the cover page
of the company brochure for separate
leaflets, as well as slots for placing a
business card. The idea is that separate
product information leaflets can be added
to the company brochure according to
each customer’s individual requirements.
At the moment the range of F1 leaflets

covers stools and headrests, colour
options, F1 Mondo, F1 Europa and F1 ENT
chair. The latest brochure is a 4–page
leaflet which covers F1 Prime. Separate
leaflets of F1 Podiatry, F1 Beauty and F1
Dental Units are being made.
Pdf files of the brochures are available on

Fimet’s home site (www.fimet.fi) under
the heading “Downloads”. If you would
like to order printed copies, please contact
[email protected].
X
1 2 3 4 5 6 7 8 9 10 11 12 2009/2
WHAT DO FIMET’S QUALITY We kindly ask for your cooperation and with each new product and it can be also
MANAGEMENT SYSTEM AND are ready to help you with any questions. found on http://www.fimet.fi/media/
WARRANTY SPARE PARTS HAVE IN Please note that a warranty form is sent forms/warranty_form.pdf.
COMMON?
Fimet’s quality management system was

audited in last May. The official body
called VTT found out that the traceability
of our products is insufficient. In order to
be able to export our products as medical
devices we have to know where the goods
are located during their entire life cycle.
That is why we have had to apply a new

warranty policy from 1 July onwards.
The warranty of a product is in force only

when a properly filled in warranty form is
sent to Fimet. The essential information
is: a) installation date and b) customer
contact information (owner’s address,
phone number, fax number, email address
and address of the equipment if it is not
the same as the owner’s address).
Only the properly filled in warranty form

enables us to deliver spare parts under
warranty. In other words Tuukka will be
asking for the filled in form before he can
send you any warranty spare parts.
X
1 2 3 4 5 6 7 8 9 10 11 12 2009/2
DEALER INTRODUCTION: FIMET website under Dental Chairs. More Good product, which looks young and
AUSTRALIA information can be found on Jeff’s website has low maintenance costs, has problems
One of Fimet’s oldest www.empiredental.com.au in finding worthy competitors. “When
dealerships can be competitors’ products have the same price
found in Australia The classic advantages found in the Fimet level as Fimet ones but no reputation,
where Mr Jeff Clohessy still outweigh its rivals. In practice a lot of which one would you choose? Product
has been selling F1 the new functions of new equipment add evidence and proven facts is something
equipment since complexity, possible technical problems no money can buy. A platform build in
1989. and maintenance issues. There are a lot concrete” as Jeff puts it.
of clever additions in the market, but
A dentist friend of dentists wonder how much they would “The 20 year ride, association with Fimet
Jeff’s bought an F1 actually use them. F1 products just keep (and some screaming), has been difficult
Jeff Clohessy
chair to his clinic. It going and going, without any sign of age at times, however, one of much enjoyment
was there Jeff came across a Fimet product or reduced performance. and work satisfaction”
for the first time. His first impression
was a dental unit with space age looks At the latest ADX
and functions. Having been in the dental expo in Sydney, Fimet
industry for some years and realising the Australia conducted
future business potential, Jeff quickly training sessions
for the Fimet team
phoned Fimet and ordered 4 chairs for of Australian and
immediate delivery. Now he says the New Zealand service
product was too modern too early. What technicians. Photo by
was a hindrance for sales back then has Jeff Clohessy.
proven to be success afterwards. Since
then he has become one of Fimet’s largest
dealers of both chairs and units.
For 20 years Jeff has steadily build

the brand name of F1 in Australia and
New Zealand making it well-known.
For example “Fimet” is rated number 1
on the first page of Australian Google
X
1 2 3 4 5 6 7 8 9 10 11 12 2009/2
F1 EXTENDED CARE
General Condition of the Unit:
1 Check visually the condition of the unit
Service deal is a promise of cooperation, 2 Check general operation of the unit
fast service and care. If you treat your 3 Check the operation of the delivery arm, adjust if necessary
car well with annual maintenance service 4 Check water and air pressure in the floor box, adjust if necessary
why not do the same with the most
Instrument Head:
important tool for the dentist – the dental
5 Check visually inside the instrument head, no water leaks
equipment. Fimet’s Australian dealer Jeff 6 Check operation and condition of the dorio arm/instrument hose, adj./rep. if necessary
Clohessy came to this conclusion in 2006. 7 Check main air, spray air, water and ext. air pressure of turbine hose/s, adj. if necessary
He signed then the first service contract 8 Check the operation of instrument light, adjust voltage, replace bulb if necessary
offering extended 5-10–year-warranty 9 Check operation, rotation both direction, speed range operation of micro motors
10 Check micro motor max voltage (24 Vdc), adjust if necessary, calibrate foot control
for Fimet made parts against regular
11 Check operation, power adjustment, paro/endo function of the electric scaler
service. Dentists have been pleased with 12 Check the operation of curing light, adjust voltage if necessary
the deal called “Fimet Tranquility Parts 13 Check the operation of syringe, replace o-rings
Guarantee”. The service ensures that 14 Check the operation of class filling/bowl rinsing, adjust time/pressure if necessary
dental equipment is always in the best 15 Check the operation of the chair control buttons from inst./suct.head
16 Check the operation of speed display/clock, adjust if necessary
condition, with modest fixed price and no
17 Replace the water solenoid valve in the instrument head
risks. 18 Replace the return air oil collector bottle
19 Check the condition of silicon covers, replace if necessary
F1 Extended Care is a unique solution that
Fimet Oy’s dealers and service technicians Other:
20 Replace the selective valves
can offer to their customers and enjoy the
21 Replace the operation light bulb and check voltage, adjust voltage if necessary
predictable income of maintenance work 22 Check the condition of operation light arm, adjust movements if necessary
and spare parts. Please contact Abdellatif 23 Replace the F1-filter in suction system
Krimou ([email protected]) for more 24 Replace the air and water filter cartridge in the floorbox
information. 25 Check the operation of x-ray films visual-display, replace bulb if necessary
26 Check the operation of suction - high, low and both together
27 Check the condition of suction hoses, clean filter, replace if necessary
28 Lubricate the suction arm slide
29 Clean the Cattani, Metasys or bowl valve sensor
30 Check the operation of Metasys, Cattani or bowl valve
31 Replace the clean water bottle
F1 E unit technical manual — instructions for annual service of F1 dental unit
X
1 2 3 4 5 6 7 8 9 10 11 12 2009/2
IDS 2009
With spring in the air visitors and

exhibitors left IDS 2009 with satisfied
looks on their faces. Dentists and dealers
found much to inspire them at the Fimet
stand. We introduced the F1 Side and
F1 Ceiling models and the visitors were
able to take a closer look at some of the
newest upholstery materials.
The five days of the exhibition were very

busy and in case we did not have a chance
to thank you then let’s do it now - thank
you for your attendance and support, and
we hope to see you at the latest in the
next IDS in March 2011. COMING EVENTS
Fimet’s German
• Dental-Expo 2009, Moscow, Russia,
dealer Mr
Andreas Ufer 8 - 11 September
and Service • CEDE 2009, Poznan, Poland,
Engineer Mr 24 - 26 September
Mika Ahl at
work. • Nordental, Oslo, Norway,
15 - 17 October
• Expodentaria, Lissabon, Portugal,
5 - 7 November
• BDTA, Birmingham, UK,
12 - 14 November
• Finnish Dental Congress and Exhibition,
Helsinki, Finland, 19 - 21 November
• ADF, Paris, France, 24 - 28 November
X
1 2 3 4 5 6 7 8 9 10 11 12 2009/2
INTRODUCTION OF KRIMOU on international business management. I am married, living in Helsinki. Loving
My studies will be completed by December sea food, cheese and red wine requires
Abdellatif Krimou, known simply by his 2009. an active sports hobby, in my case that
family name Krimou, has been nominated is jogging.”
as Sales Director for Fimet Oy from 1
July onwards. Here is some background
information of him in his own words:
“I started at Fimet almost nine years ago

as a trainee for an International Business
programme. At that time it was not yet
quite clear what kind of career and work
opportunities Fimet as an employer could
offer. After the programme was completed
in 2001 I continued at Fimet as an Export
Representative taking care of France,
Arab countries, East Europe, Russia and
international projects. In 2003 I was
nominated as an Export Manager, taking
care of the same market areas.
I have had the chance to develop close

cooperation with Fimet’s dealers in several
countries both in dental equipment, ENT
and podiatry chair sales. In 2007 I decided
to expand my knowledge from MA and
BBA degrees to an MBA one concentrating
Sales Director Abdellatif Krimou
X
1 2 3 4 5 6 7 8 9 10 11 12 2009/2
SPORTS NEWS
Some of Fimet’s employees keep fit by

cycling to work. Here Fimet’s Deputy
Managing Director Jukka Perttilä’s
experiences:
“I have developed my own exercise

regime of cycling the work trip once per
week, usually on Fridays. In practice that
means 100 km per day (one-way trip
from Helsinki to Monninkylä is 50 km).
The weekly cycling takes place in summer
from 1st of May until Fimet’s holidays
begin in mid-July making approximately
10 times per season. In addition I cycle,
swim, go jogging, downhill skiing or roller
skating, as well as play tennis or floor ball
about three times per week depending on
the season.
When I cycle to work I leave about 5:30

am from home and the trip takes about
two hours. The journey passes along
small country roads through beautiful
landscapes of Southern Finland. One
afternoon I came across a snake that was
warming up on the road. It is hard to say Jukka Perttilä, Deputy Managing Director Anna Eriksson, Export Assistant — cycles
which one of us got more frightened. My every day from Porvoo to Monninkylä
biggest opponents are headwind and rain, (about 17 km) and back.
which slow down the speed significantly if
they come my way.”
X
1 2 3 4 5 6 7 8 9 10 11 12 2009/2
Message from Spain:

Thank you for your FimetNews09.
I feel me very touched.
Thanks again.
SMALL NEWS Juan Ligero
We have asked for your comments If you have any news, views and So that you do not try to reach us in
concerning Fimet News, our products comments that might interest the vain during holidays here are the dates
and company. Thanks to your activity we Fimet News readers please send us when we will be absent: The production
have received a nice amount of feedback. your e-mail to: [email protected] or department will be closed between 20 July
Please go on with the support. [email protected]. and 16 August and the whole company
will be closed between 3 to 16 August.
X
1 2 3 4 5 6 7 8 9 10 11 12 2009/2
FIMET SALES AND AFTERSALES
TIMO JANHUNEN ABDELLATIF KRIMOU SATU MYLLYS

Managing Director Sales Director Marketing Director
general management, export, French and marketing
projects, China Arabic speaking tel. +358 40 020 7703
operations countries, projects, after
tel. +358 40 502 6257 sales service, forwarding
tel. +358 40 527 9949
TUUKKA HEIMAN MARJO SALMINEN MIKA AHL

After Sales Engineer, Export Assistant After Sales Engineer,
spare parts tel. +358 19 521 6624 technical support
tel. +358 19 521 6637 tel. +358 40 500 3026
ANTTI LEHTINEVA ANNA ERIKSSON VILLE WIIK

Sales Manager Export Assistant IT Support Specialist
export, Scandinavia, tel. +358 19 521 6622 iOX technical support, IT
after sales service, IT support
operations tel. +358 19 521 6647
+358 40 502 6258
ALEXEY SAMSONOV ANNE VUORINEN KARI KIVINIEMI

Export Manager Export Assistant Research & Development
export, CIS countries tel. +358 19 521 6623 iOX, multimedia system
+358 40 020 6064 software programming
+7 91 1998 0939 tel. +358 19 521 6647

Fimet F1 Technical Manual PDF

Uploaded by

Copyright:

Available Formats

Fimet F1 Technical Manual PDF

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Fimet F1 Technical Manual PDF

Uploaded by

Copyright:

Available Formats

X

The product improvements may seem

We have met with you at several

FIMET NEWS FIMET NEWS FIMET NEWS FIMET NEWS

Our customers have different preferences

connects and the contents of multimedia RCA video�cable

Some customers have wished for higher

the patient can easier watch e.g. DVD

Fimet has released a completely updated

At the moment the range of F1 leaflets

Pdf files of the brochures are available on

Fimet’s quality management system was

That is why we have had to apply a new

The warranty of a product is in force only

Only the properly filled in warranty form

For 20 years Jeff has steadily build

F1 E unit technical manual — instructions for annual service of F1 dental unit

With spring in the air visitors and

The five days of the exhibition were very

“I started at Fimet almost nine years ago

I have had the chance to develop close

Sales Director Abdellatif Krimou

Some of Fimet’s employees keep fit by

“I have developed my own exercise

When I cycle to work I leave about 5:30

Message from Spain:

TIMO JANHUNEN ABDELLATIF KRIMOU SATU MYLLYS

TUUKKA HEIMAN MARJO SALMINEN MIKA AHL

ANTTI LEHTINEVA ANNA ERIKSSON VILLE WIIK

ALEXEY SAMSONOV ANNE VUORINEN KARI KIVINIEMI

You might also like