Trac Fujico

Mohammed Mustafa Khan Personal Info
(MEP Design Engineer)

 +91-8686440389 Father’s Name: Md KaleelUllah
 [email protected] Khan
 Hyderabad.
Date of Birth: 03-05-1996
Nationality: Indian
Profile Summary
Languages Known: English, Urdu,
❖ Looking for a challenging and demanding position in a growth oriented Hindi.
MEP consulting/contracting/ construction organizations, where there is
ample scope for individual and organizational growth. Address: HNo. 12-2-830/A/6, Hill
❖ Well versed with HVAC, Electrical, Plumbing & Fire Fighting Standards like colony, Mehdipatnam, Hyderabad -
ASHRAE, SMACNA, NEC, DEWA, BS, NBC, IPC, ASPE, UPC and NFPA. 500028.
❖ Create comprehensive plans, layouts, working drawings, construction
details as per design requirement to ensure execution of projects within
time.
❖ Proficiency in swiftly ramping up the projects in close co-ordination with
Consultants, Architects & Contractors; detail oriented & organized with Education
excellent planning, analytical & inter-personal skills.
❖ Strong sense of motivating teams in surpassing their performance
standards. B.Tech in Mechanical Engineering.
• Al – Habeeb College of
PROJECTS HANDELED Engineering & Technology.
• JNTU-Hyderabad.
❖ THE OLD MADRAS BAKING COMPANY:
In this project i self-designed and drafted the central ac system
(Only cassette system) and the total tonnage of the project was
20 TR by following the ASHRAE and Smacna Standards.
❖ DR. ROHITS RESIDENCE (VRV) Higher Secondary (Intermediate)
I verily designed the VRV system (DAIKIN) and the project was of • Narayana Junior College
22 HP.
❖ DUBAI HOTEL (CHW – AIR COOLED) TONNAGE: 115 TR
I here Drafted the 18 FCU units and did the ducting work along
Secondary School (Matric)
with the placement of machines.
• Raxford Value School
MEP- Design Engineer.
HVAC-MEP
❖ Heat Load calculations following ASHRAE Standards.
Internship
❖ Heat Load Calculation by HAP software.
❖ Air Distribution System by Velocity Reduction Method, Equal Friction BHEL ( BHARAT HEAVY
Method and Static Regain Method following SMACNA Standards. ELECTRONIC LIMITED )
❖ ESP Calculations for Fans & Blowers. TOPIC : A study on bowl Mills and
❖ Evaporator cooling coil selection.
heat exchangers
❖ Ventilation system Designing.
❖ Stairwell pressurization system Designing.
❖ Head Loss calculation for Primary & Secondary Pump system.
❖ Chilled water pipe sizing.
Page 1|3
❖ Installation of Air Conditioning and Ventilating system per NFPA-90A.
❖ Selection of Chillers, AHU’S, FCU’S, Exhaust Fan, Blower, Cooling Achievement
Tower, Desert Cooler and other Equipment’s.
❖ Design of VRF/VRV System using Toshiba/Blue Star software. Stood first in the all india technical
❖ Design of Precision Cooling fest in the year 2017
❖ Preparation of Bill of Quantity of Materials for Projects.
ELECTRICAL-MEP
❖ Calculation of No. of Lighting Fixture by Software as per IS 3646 and
Software’s
BS 5266.
❖ Calculation of No. of ceiling Fan and Ex. Fan as per IS 374. HVAC:
❖ Placing Sockets-Outlets, Plugs & Connection Units as per IS 60309 and • HAP
BS 1363. • ELITE
❖ Load Schedule & Phase Distribution for Panel Boards. • Mc Quay Duct Sizer
❖ Electrical wiring installation as per IS 732 and BS 7671. • Mc Quay Pipe Sizer
❖ Electrical Cable Sizing as per IS 3961 and BS 7211 and Voltage Drop. • BETA
❖ Cable Glands selection as per IS and BS 6121. • TOSIBA VRF
❖ Calculation of minimum size of CPC or ECC-BS 7430. • Blue Star VRF
❖ Selection of Circuit Breaker as per IS 60898 and BS 61439. • Zamil Software
❖ Selection of RCCBs as per IS 12640 and BS EN 61008.
❖ Selection of Distribution Boards considering IP Rating.
❖ Conduit system, Cable Trunking, Cable Ducting and Cable Tray sizing.
ELECTRICAL:
❖ Transformer Selection & Short Circuit Calculation.
• DIALUX
❖ Capacitor Bank Selection as per IEC 61921.
❖ Preparation of Single Line Diagram as per all electrical loads. Mn ;./
❖ Consumer’s Earthing System Design as per IS 3043 and BS 4444.
❖ Stand-by Generators selection, Solar Panel and UPS selection.
FIRE FIGHTING:
❖ Calculation for protection against Lightning as per IS 62305.
• ELITE
❖ Calculation for No. of PAS.
❖ Preparation of material forecast; includes material selection, quality etc.
❖ Preparation of Bill of Quantity of Materials for Projects.
• AutoCAD-18
PLUMBING-MEP • REVIT-20
❖ Calculation of water supply demand as per NBC, UPC, IPC and ASPE. • Naviswork
❖ Underground Reservoir & Elevated Roof Tank Sizing.
• MS Office-16
❖ Water Supply System and Foul Water Drainage System Calculation as per
❖ UPC, NBC and IPC.
❖ Auto-Pneumatic System Designing for High Rise Building.
❖ Calculation for Irrigation and Drip Irrigation System Designing.
❖ Calculation for Water Fountain.
❖ Vertical Stack, Branch Drain pipe, Horizontal sewer Sizing.
❖ Manhole, Septic Tank, Soak away pit, Dispersion Trenches Calculation.
❖ Calculation for Storm Water Drainage System.
❖ Water Pump, Booster Pump, Fountain Pump Selection.
Page 2|3
FIRE FIGHTING
❖ Fire water Demand & Fire water tank Calculation following NFPA 20.
❖ Hydraulic calculation for Fire water pumps system by Elite Software.
❖ Jockey pump, Main Pump, Diesel Operated Pump, and Booster Pumps
Selection as per NFPA 20 Standard.
❖ Calculation Diesel Fuel Tank Capacity as per NFPA 20.
❖ Sprinkler System Designing as NFPA 13.
❖ Fire Hose Station/Cabinet Designing as per NFPA 14.
❖ Designing for Fire Hydrant system as per NFPA 24.
❖ Fire Alarm system design, spacing and Selection.
❖ FM 200(Waterless system) Designing and Fire Extinguisher Selection.
❖ Fire System Design Calculations as per NBC Standards.
REVIT-MEP
❖ Creating Families & Parameters.
❖ Creating Annotations, Dimensions and Legends.
❖ Creating Documentation Views.
❖ Project Detailing.
❖ Importing and Exporting a CAD drawing and Linking the projects.
❖ Tracing MEP Services and Architecture Plan.
❖ Creating spaces and zone on single and multi-level.
❖ Designing Mechanical Air Systems; creating airflow schedule,
analyzing heating and cooling loads.
❖ Generating and Manually Creating Ductwork.
❖ Creating Mechanical system and Schedule & Quantity.
❖ Specifying Electrical and Mechanical Setting.
❖ Creating Electrical Panel Schedule and Systems.
❖ Configuring a Plumbing and Piping System.
❖ Adding Electrical and Plumbing Fixtures.
❖ Specifying Pipe Settings and Creating Sprinkler Design Schedule.
❖ Planning Mechanical, Electrical, Plumbing and Fire Fighting System.
❖ Creating Sheets, Workset & Work sharing.
❖ Clash Detection (Naviswork); Clash Test and Navigation Tools.
Page 3|3

Trac Fujico

Uploaded by

Copyright:

Available Formats

Trac Fujico

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Trac Fujico

Uploaded by

Copyright:

Available Formats

Mohammed Mustafa Khan Personal Info

(MEP Design Engineer)

MEP- Design Engineer.

You might also like