Scribd Logo
Upload

Welcome to Scribd!

  • 185 views

    Diagrama de Coneccion de Motores para CNC

    Uploaded by

    Freddy Cajas
    This document provides a diagram of the electrical components of a 5 axis CNC machine. It includes a power supply that converts 120V AC power to 24V DC power. This 24V DC power is distributed to driver boards for NEMA 23 stepper motors on the X, Y, Z, and A axes. The driver boards control the stepper motors by sending signals along shielded cables based on commands from the PC through a parallel or USB connection. A relay is used to control power to the spindle.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Diagrama de Coneccion de Motores para CNC

    Uploaded by

    Freddy Cajas
    185 views1 page
    This document provides a diagram of the electrical components of a 5 axis CNC machine. It includes a power supply that converts 120V AC power to 24V DC power. This 24V DC power is distributed to driver boards for NEMA 23 stepper motors on the X, Y, Z, and A axes. The driver boards control the stepper motors by sending signals along shielded cables based on commands from the PC through a parallel or USB connection. A relay is used to control power to the spindle.

    Original Description:

    diagrama electronico

    Original Title

    diagrama de coneccion de motores para cnc

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides a diagram of the electrical components of a 5 axis CNC machine. It includes a power supply that converts 120V AC power to 24V DC power. This 24V DC power is distributed to driver boards for NEMA 23 stepper motors on the X, Y, Z, and A axes. The driver boards control the stepper motors by sending signals along shielded cables based on commands from the PC through a parallel or USB connection. A relay is used to control power to the spindle.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    185 views1 page

    Diagrama de Coneccion de Motores para CNC

    Uploaded by

    Freddy Cajas
    This document provides a diagram of the electrical components of a 5 axis CNC machine. It includes a power supply that converts 120V AC power to 24V DC power. This 24V DC power is distributed to driver boards for NEMA 23 stepper motors on the X, Y, Z, and A axes. The driver boards control the stepper motors by sending signals along shielded cables based on commands from the PC through a parallel or USB connection. A relay is used to control power to the spindle.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    5 AXIS CNC

    BREAKOUT BOARD DRIVER BOARD NEMA 23


    POWER BAR STEPPER MOTOR
    POWER SUPPLY 24VDC 4 PAIR 22AWG
    120VAC BLACK 24VDC SHIELDED CABLE RED
    L 24VDC X AXIS 4 CONDUCTOR CABLE COM B+
    NEUTRAL WHITE COM OR RIBBON CABLE BLUE
    N COM STEP STEP B-
    GROUND GREEN BLACK X AXIS
    GND DIR DIR A+
    GREEN
    EN EN A-
    PC (SOLDER
    +5V +5V CONNECTION)

    PARALLEL PORT
    PARALLEL CABLE DRIVER BOARD NEMA 23
    STEPPER MOTOR
    USB MALE TO MALE CABLE 24VDC 4 PAIR 22AWG
    SHIELDED CABLE RED
    Y AXIS 4 CONDUCTOR CABLE COM B+
    OR RIBBON CABLE BLUE
    STEP STEP B-
    BLACK Y AXIS #1
    DIR DIR A+
    GREEN
    EN EN A-
    PC

    POWER
    USB 5V
    (SOLDER
    MONITOR +5V +5V CONNECTION)

    DRIVER BOARD NEMA 23


    STEPPER MOTOR
    COOLING FAN B AXIS 24VDC 4 PAIR 22AWG
    SHIELDED CABLE RED
    STEP Z AXIS 4 CONDUCTOR CABLE COM B+
    OR RIBBON CABLE BLUE
    DIR STEP STEP B-
    B AXIS NOT USED BLACK Z AXIS
    EN DIR DIR A+
    GREEN
    +5V EN EN A-
    40A RATED (SOLDER
    CONTACTOR ROUTER +5V +5V CONNECTION)

    120VAC BLACK
    DRIVER BOARD NEMA 23
    STEPPER MOTOR
    NEUTRAL WHITE 24VDC 4 PAIR 22AWG
    SHIELDED CABLE RED
    A AXIS 4 CONDUCTOR CABLE COM B+
    24VAC COIL OR RIBBON CABLE BLUE
    COM STEP STEP B-
    BLACK Y AXIS #2
    DIR DIR A+
    SPINDLE GREEN
    TOGGLE SWITCH RELAY
    DPDT EN EN A-
    12VDC (SOLDER
    POWER N.C. +5V +5V CONNECTION)
    ADAPTER
    1.5A COM
    N.O.
    12VDC
    LASER DIODE
    NOT USED IN5
    12VDC LASER CONTROL
    POWER BOARD E-STOP IN4
    ADAPTER
    3A BLUE
    Z AXIS LIMIT IN3
    GREY LASER FAN Y AXIS LIMIT IN2
    RED
    X AXIS LIMIT IN1
    BLACK
    GND

    You might also like